Plot the monthly average data presented in Table 1 onto the blank grap.pdf
•
0 likes•3 views
Plot the monthly average data presented in Table 1 onto the blank graph provided below. Use a different colored pencil for each location (blue for Deadhorse, green for Beijing, and red for Kampala) and connect the points with a line. 2. Which regions are these cities located, Tropical, Mid-latitude, or Polar Regions? 3. Briefly describe the seasonal variations of the three cities..
Report
Share
Report
Share
Download to read offline
Recommended
Plot total civilian unemployment from 2000 through 2021 adding in the.pdf
Plot total civilian unemployment from 2000 through 2021 adding in the 2022 data point of
unemployment equal to 3.4%. Discuss.
Complete the table concerning the loss in GDP because of unemployment. Assume a 4%
Frictional Rate of unemployment and a Okun's Law value of 3.
HEADINGS FOR THE TABLE
SASUMMARY State annual summary statistics: personal income, GDP, consumer spending,
price indexes, and employment Real gross domestic product (GDP) (Millions of chained 2012
dollars) 1/ Bureau of Economic Analysis State or DC Legend / Footnotes: measure of real GDP..
Please write an SQL query to find the city which have more than 2 ACTI.pdf
Please write an SQL query to find the city which have more than 2 ACTIVE cells located.
ALL_CEUL (CEULD, CEUL_NAME, ACTIVE, CIT, VENDOR, TECH) 2.
ALL_PERFORMANCE (CEUUD, DATE, DATA_INTEGRIT, CPU_USAGE, TRAFFIC)
CELUD: The ID of the network cell (primary key) CELUD: The ID of the network cell
CEU_NAME: The name of the network cell DATE: The dote that the stotistics collected
ACTIVE: The stotus of the network cell if it's enabled DATA_INTEGRTY: \% of the dato
integrity crrv: The name of the city that the network cell is located/served CPU_USAGE: % of
the CPU utilization VENDOR: The Vendor of the network cell TRAFFIC: troffic volue TECH:
The technology ( 2 G /3 G /4 G ) TableName: ALL_PERFORMANCE TableName: Aul_CEus.
Please use java to write the program that simulates the card game!!! T (1).pdf
Please use java to write the program that simulates the card game!!! Thx!!!
Given codes:
Dealer.java :
import java.util.Random;
/**
* This class represents a dealer who shuffles a deck of cards and
* distributes them to players.
*/
public class Dealer {
private Deck deck;
/**
* Creates a new Dealer object with the specified players and deck.
*
* @param players the array of CardPlayer objects to distribute the cards to
* @param deck the Deck object to shuffle and distribute
*/
public Dealer(CardPlayer[] players, Deck deck) {
this.deck = deck;
this.shuffle();
this.distribute(players, this.deck);
}
/**
* Distributes the cards in the deck to the specified players.
*
* @param players the array of CardPlayer objects to distribute the cards to
* @param deck the Deck object to distribute
*/
private void distribute(CardPlayer[] players, Deck deck) {
for (int cardCounter = 0; cardCounter < deck.cards.length; cardCounter += players.length) {
for (int playerCounter = 0; playerCounter < players.length; playerCounter++) {
players[playerCounter].addToHand(deck.cards[cardCounter + playerCounter]);
}
}
}
/**
* Shuffles the cards in the deck; it generates two random variables as the card
* index and swaps them.
*/
private void shuffle() {
Random randomNumber = new Random();
for (int card = 0; card < this.deck.cards.length; card++) {
swap(randomNumber.nextInt(deck.cards.length), randomNumber.nextInt(deck.cards.length));
}
}
/**
* Swaps the positions of two cards in the deck.
*
* @param random1 the index of the first card to swap
* @param random2 the index of the second card to swap
*/
private void swap(int random1, int random2) {
Card temp;
temp = this.deck.cards[random1];
this.deck.cards[random1] = this.deck.cards[random2];
this.deck.cards[random2] = temp;
}
/**
* Prints out the identifier of each card in the deck.
*/
public void showDeck() {
for (Card card : this.deck.cards) {
System.out.println(card.identifier);
}
}
}
GeneralPlayer.java:
/**
* An abstract class representing a general player.
*
* @param <T> the type of the value returned by the player's play method.
*/
public abstract class GeneralPlayer<T> {
/** The name of the player. */
public String name;
/**
* Creates a new GeneralPlayer with a default name.
*/
public GeneralPlayer() {
this.name = "General Player";
}
/**
* Creates a new GeneralPlayer with the given name.
*
* @param name the name of the player.
*/
public GeneralPlayer(String name) {
this.name = name;
}
/**
* Makes a move or takes an action, depending on the implementation.
*
* @return the result of the player's action or move.
*/
public abstract T play();
}
Card.java:
/**
* A class that represents a playing card with a rank and suit.
*/
public class Card {
/**
* The rank of the card which is a number from 1 to 13.
* Includes King, Queen, Jack, and Ace.
*/
private int rank;
/**
* The suit of the card which is a number from 1 to 4
* Can be clubs (), diamonds (), hearts () or spades ().
*/
private int suit;
/**
* The identifier of the card.
.
Please use c++ and give screen shot of full code There are n boxes of.pdf
Please use c++ and give screen shot of full code
There are n boxes of n different items in a warehouse. Each box has a label that says the name (
mi ), total weight (w_i) in kg and the total value (v_i i) in taka of that item (i). All items are
divisible. Suppose, k thieves have come to steal from the warehouse, each with a knapsack of
capacity W_i. Given each thief wants to maximize his/her profit. how manv thieves will be
needed to embtv the warehouse?.
Please use c++ There are n boxes of n different items in a warehouse-.pdf
Please use c++
There are n boxes of n different items in a warehouse. Each box has a label that says the name (
mi ), total weight (w_i) in kg and the total value (v_i i) in taka of that item (i). All items are
divisible. Suppose, k thieves have come to steal from the warehouse, each with a knapsack of
capacity W_i. Given each thief wants to maximize his/her profit. how manv thieves will be
needed to embtv the warehouse?.
please solve the following questions in the picture- Part2 - Based on.pdf
please solve the following questions in the picture:
Part2 : Based on your studies, determine the following definitions and choose the right concept
that reflects the meaning of each. (4Marks) A. Digital and social medi B. Political Environment
C. Product concept D. Customer satisfaction E. Butterfly F. Competitors G. Culture Environment
H. Societal Marketing D. Customer satisfaction E. Butterfly F. Competitors G. Culture
Environment H. Societal Marketing.
please solve thank you All of the following statements concerning osmo.pdf
please solve thank you
All of the following statements concerning osmosis are true EXCEPT: Cells placed in hypotonic
solutions will gain water. During osmosis, water crosses to the side of the membrane with a
lower concentration of solute. Osmosis stops when the system reaches equilibrium. Osmosis
requires a selectively permeable membrane..
Please solve the following problem- Create a program that allows disce.pdf
Please solve the following problem:
Create a program that allows discerning if the character (a single character) entered by the user
through the console is a letter or a number. Subsequently, it must print on the screen if it is
numeric or letter, using C language of programming. Remember that all characters have a
defined position in the ascii table.,
This program must include the commands: int, float, scanf and operators that are relational and
arithmetic..
Recommended
Plot total civilian unemployment from 2000 through 2021 adding in the.pdf
Plot total civilian unemployment from 2000 through 2021 adding in the 2022 data point of
unemployment equal to 3.4%. Discuss.
Complete the table concerning the loss in GDP because of unemployment. Assume a 4%
Frictional Rate of unemployment and a Okun's Law value of 3.
HEADINGS FOR THE TABLE
SASUMMARY State annual summary statistics: personal income, GDP, consumer spending,
price indexes, and employment Real gross domestic product (GDP) (Millions of chained 2012
dollars) 1/ Bureau of Economic Analysis State or DC Legend / Footnotes: measure of real GDP..
Please write an SQL query to find the city which have more than 2 ACTI.pdf
Please write an SQL query to find the city which have more than 2 ACTIVE cells located.
ALL_CEUL (CEULD, CEUL_NAME, ACTIVE, CIT, VENDOR, TECH) 2.
ALL_PERFORMANCE (CEUUD, DATE, DATA_INTEGRIT, CPU_USAGE, TRAFFIC)
CELUD: The ID of the network cell (primary key) CELUD: The ID of the network cell
CEU_NAME: The name of the network cell DATE: The dote that the stotistics collected
ACTIVE: The stotus of the network cell if it's enabled DATA_INTEGRTY: \% of the dato
integrity crrv: The name of the city that the network cell is located/served CPU_USAGE: % of
the CPU utilization VENDOR: The Vendor of the network cell TRAFFIC: troffic volue TECH:
The technology ( 2 G /3 G /4 G ) TableName: ALL_PERFORMANCE TableName: Aul_CEus.
Please use java to write the program that simulates the card game!!! T (1).pdf
Please use java to write the program that simulates the card game!!! Thx!!!
Given codes:
Dealer.java :
import java.util.Random;
/**
* This class represents a dealer who shuffles a deck of cards and
* distributes them to players.
*/
public class Dealer {
private Deck deck;
/**
* Creates a new Dealer object with the specified players and deck.
*
* @param players the array of CardPlayer objects to distribute the cards to
* @param deck the Deck object to shuffle and distribute
*/
public Dealer(CardPlayer[] players, Deck deck) {
this.deck = deck;
this.shuffle();
this.distribute(players, this.deck);
}
/**
* Distributes the cards in the deck to the specified players.
*
* @param players the array of CardPlayer objects to distribute the cards to
* @param deck the Deck object to distribute
*/
private void distribute(CardPlayer[] players, Deck deck) {
for (int cardCounter = 0; cardCounter < deck.cards.length; cardCounter += players.length) {
for (int playerCounter = 0; playerCounter < players.length; playerCounter++) {
players[playerCounter].addToHand(deck.cards[cardCounter + playerCounter]);
}
}
}
/**
* Shuffles the cards in the deck; it generates two random variables as the card
* index and swaps them.
*/
private void shuffle() {
Random randomNumber = new Random();
for (int card = 0; card < this.deck.cards.length; card++) {
swap(randomNumber.nextInt(deck.cards.length), randomNumber.nextInt(deck.cards.length));
}
}
/**
* Swaps the positions of two cards in the deck.
*
* @param random1 the index of the first card to swap
* @param random2 the index of the second card to swap
*/
private void swap(int random1, int random2) {
Card temp;
temp = this.deck.cards[random1];
this.deck.cards[random1] = this.deck.cards[random2];
this.deck.cards[random2] = temp;
}
/**
* Prints out the identifier of each card in the deck.
*/
public void showDeck() {
for (Card card : this.deck.cards) {
System.out.println(card.identifier);
}
}
}
GeneralPlayer.java:
/**
* An abstract class representing a general player.
*
* @param <T> the type of the value returned by the player's play method.
*/
public abstract class GeneralPlayer<T> {
/** The name of the player. */
public String name;
/**
* Creates a new GeneralPlayer with a default name.
*/
public GeneralPlayer() {
this.name = "General Player";
}
/**
* Creates a new GeneralPlayer with the given name.
*
* @param name the name of the player.
*/
public GeneralPlayer(String name) {
this.name = name;
}
/**
* Makes a move or takes an action, depending on the implementation.
*
* @return the result of the player's action or move.
*/
public abstract T play();
}
Card.java:
/**
* A class that represents a playing card with a rank and suit.
*/
public class Card {
/**
* The rank of the card which is a number from 1 to 13.
* Includes King, Queen, Jack, and Ace.
*/
private int rank;
/**
* The suit of the card which is a number from 1 to 4
* Can be clubs (), diamonds (), hearts () or spades ().
*/
private int suit;
/**
* The identifier of the card.
.
Please use c++ and give screen shot of full code There are n boxes of.pdf
Please use c++ and give screen shot of full code
There are n boxes of n different items in a warehouse. Each box has a label that says the name (
mi ), total weight (w_i) in kg and the total value (v_i i) in taka of that item (i). All items are
divisible. Suppose, k thieves have come to steal from the warehouse, each with a knapsack of
capacity W_i. Given each thief wants to maximize his/her profit. how manv thieves will be
needed to embtv the warehouse?.
Please use c++ There are n boxes of n different items in a warehouse-.pdf
Please use c++
There are n boxes of n different items in a warehouse. Each box has a label that says the name (
mi ), total weight (w_i) in kg and the total value (v_i i) in taka of that item (i). All items are
divisible. Suppose, k thieves have come to steal from the warehouse, each with a knapsack of
capacity W_i. Given each thief wants to maximize his/her profit. how manv thieves will be
needed to embtv the warehouse?.
please solve the following questions in the picture- Part2 - Based on.pdf
please solve the following questions in the picture:
Part2 : Based on your studies, determine the following definitions and choose the right concept
that reflects the meaning of each. (4Marks) A. Digital and social medi B. Political Environment
C. Product concept D. Customer satisfaction E. Butterfly F. Competitors G. Culture Environment
H. Societal Marketing D. Customer satisfaction E. Butterfly F. Competitors G. Culture
Environment H. Societal Marketing.
please solve thank you All of the following statements concerning osmo.pdf
please solve thank you
All of the following statements concerning osmosis are true EXCEPT: Cells placed in hypotonic
solutions will gain water. During osmosis, water crosses to the side of the membrane with a
lower concentration of solute. Osmosis stops when the system reaches equilibrium. Osmosis
requires a selectively permeable membrane..
Please solve the following problem- Create a program that allows disce.pdf
Please solve the following problem:
Create a program that allows discerning if the character (a single character) entered by the user
through the console is a letter or a number. Subsequently, it must print on the screen if it is
numeric or letter, using C language of programming. Remember that all characters have a
defined position in the ascii table.,
This program must include the commands: int, float, scanf and operators that are relational and
arithmetic..
Please solve Question 9- 8- P the.pdf
This very short document appears to be the beginning of instructions for solving a math problem but is cut off. It mentions solving Question 9 and the number 8 but does not provide enough context to form a complete summary.
Please show your work! Draw an UML class diagram showing the classes.pdf
Please show your work!
Draw an UML class diagram showing the classes and relationships for the situations described
below. Clearly identify the relationships as inheritance, association, aggregation etc. A Movie
Theater screens many movies (at different times) and a movie can be shown in multiple theaters.
A movie can be an animated movie or a live-action movie. A movie theater contains a box office
where tickets are sold or reserved..
Please simply answer the questions below using Internet research (Scho.pdf
The HALO Hydrogen Hub project is a proposed clean hydrogen production and transportation hub in the Midwestern United States led by a consortium of companies and research institutions. It aims to demonstrate production of hydrogen from renewable sources and its use for transportation and other applications. The project is expected to receive over $8 billion in funding from the 2021 Infrastructure Investment and Jobs Act and plans to be operational by 2026-2027. If successful, the HALO Hydrogen Hub could help decarbonize industries, create jobs, and establish the Midwest as a leader in clean hydrogen technology. However, the project also entails risks from any delays or cost overruns during development.
Please solve (b) The frequency distribution of heights of 100 college.pdf
Please solve
(b) The frequency distribution of heights of 100 college students is as follows: [ 1 0 Find (i) the
first quartile, (ii) the median, (iii) the third quartile, and (iv) inter-quartile range..
Please show the work for this question- The Voyager spacecraft has bee.pdf
Please show the work for this question.
The Voyager spacecraft has been transported by an alien being to the Delta Quadrant of space,
millions of light-years from Earth. Captain Janeway and her crew are attempting to plot the
shortest course home. Below is a network of the possible routes through the Delta Quadrant,
where the nodes are different worlds/planetary systems and the values on the branches are the
actual times, in years, between the nodes. a. Determine the shortest route from their present
location (at node 1) to Earth (node 22). Do NOT find the permanent set; only the short route to
Earth. b. When you are finished, give the total number of years it takes Voyager to reach Earth.
Note: This problem is continued in Part Two of the problem set where you will use Excel to
verify your solution..
please show the work to the numerical example i need help The Network.pdf
please show the work to the numerical example i need help
The Network and Ledger System - We know that there are two standard types of ledgers:
centralized and distributed. Can you design a ledger system that combines a centralized ledger
and a distributed ledger? Please illustrate [graphically or numerically]..
Please show that L is regular by creating a DFA- Consider the followin.pdf
L is the language that contains strings with an equal number of r's separated by a single t character where the t is followed by a single character from the alphabet {a,b}. To show L is regular, a deterministic finite automata (DFA) that accepts this language can be constructed.
please type all answers asap- i dont have figures- just do it without (1).pdf
please type all answers asap, i dont have figures. just do it without figure
6. Describe each of the different cloud types as shown on page 159 (cirrus, cirrostratus etc) 7.
Define and describe the four different types of fog. What are they like and where are they found?
8. Define and describe each of the types of precipitation. 9. Describe the four types of
atmospheric lifting.
Please the following is the currency class of perious one- class Curre.pdf
Please the following is the currency class of perious one.
class Currency {
protected:
int whole;
int fraction;
virtual std::string get_name() = 0;
public:
Currency() {
whole = 0;
fraction = 0;
}
Currency(double value) {
if (value < 0)
throw "Invalid value";
whole = int(value);
fraction = std::round(100 * (value - whole));
}
Currency(const Currency& curr) {
whole = curr.whole;
fraction = curr.fraction;
}
/* This algorithm gets the whole part or fractional part of the currency
Pre: whole, fraction - integer numbers
Post:
Return: whole or fraction
*/
int get_whole() { return whole; }
int get_fraction() { return fraction; }
/* This algorithm adds an object to the same currency
Pre: object (same currency)
Post:
Return:
*/
void set_whole(int w) {
if (w >= 0)
whole = w;
}
void set_fraction(int f) {
if (f >= 0 && f < 100)
fraction = f;
}
/* This algorithm adds an object to the same currency
Pre: object (same currency)
Post:
Return:
*/
void add(const Currency* curr) {
whole += curr->whole;
fraction += curr->fraction;
if (fraction > 100) {
whole++;
fraction %= 100;
}
}
/* This algorithm subtracts an object to the same currency
Pre: object (same currency)
Post:
Return:
*/
void subtract(const Currency* curr) {
if (!isGreater(*curr))
throw "Invalid Subtraction";
whole -= curr->whole;
if (fraction < curr->fraction) {
fraction = fraction + 100 - curr->fraction;
whole--;
}
else {
fraction -= curr->fraction;
}
}
/* This algorithm compares the an object of the same currency for equality or inequality
Pre: object (same currency)
Post:
Return: whole/fraction
*/
bool isEqual(const Currency& curr) {
return curr.whole == whole && curr.fraction == fraction;
}
/* This algorithm compares the an object of the same currency to determine which is greater or
smaller
Pre: object (same currency)
Post:
Return: true/false
*/
bool isGreater(const Currency& curr) {
if (whole < curr.whole)
return false;
if (whole == curr.whole && fraction < curr.fraction)
return false;
return true;
}
/* This algorithm prints the name and value of the currency object
Pre: value of whole, fraction, and the name
Post: whole, fraction, get_name()
Return:
*/
void print() {
std::cout << whole << "." << fraction << " " << get_name() << std::endl;
}
};
class Krone : public Currency {
protected:
/*
This algorithm gets the name for the Currency.
Pre: name - declared as string and initialized as Krone
Post:
Return: name
*/
std::string name = "Krone";
std::string get_name() {
return name;
}
public:
Krone() : Currency() { }
Krone(double value) : Currency(value) { }
Krone(Krone& curr) : Currency(curr) { }
};
class Soum : public Currency {
protected:
/* This algorithm gets the name for the Currency.
Pre: name - declared as string and initialized as Soum
Post:
Return: name
*/
std::string name = "Soum";
std::string get_name() {
return name;
}
public:
Soum() : Currency() { }
Soum(double value) : Currency(value) { }
Soum(Krone& curr) : Currency(curr) { }
};
A LinkNode structure or class which will have two attrib.
Please trace the execution of the following solution to the Dining Phi.pdf
Please trace the execution of the following solution to the Dining Philosopher problem.
#define N ___
enum status(EATING, HUNGRY, THINKING};
monitor diningPhilosophers {
status state[N];
condition self[N];
test(int i) {
if((state[(i-1) mod N] != EATING) &&
(state[i] == HUNGRY) &&
(state[(i+1) mod N] != EATING)) {
state[i] = EATING;
self[i].signal();
}
};
public:
diningPhilosophers() { // Initilization
for(int i = 0; i < N; i++) state[i] = THINKING;
};
test(int i) {
if((state[(i-1) mod N] != EATING) &&
(state[i] == HUNGRY) &&
(state[(i+1) mod N] != EATING)) {
state[i] = EATING;
self[i].signal();
};
};
public:
diningPhilosophers() {...};
pickUpForks(int i) {
state[i] = HUNGRY;
test(i);
if(state[i] != EATING) self[i].wait();
};
putDownForks(int i) {
state[i] = THINKING;
test((i-1) mod N);
test((i+1) mod N);
};
}.
please show elegoo arduino board setup using a passive buzzer- heres t.pdf
please show elegoo arduino board setup using a passive buzzer. heres the code below:
#define
F_CPU
16000000
UL
// CPU Frequency
#include
<avr/io.h>
#include
<util/delay.h>
volatile
uint8_t
notePlaying =
0
;
void
setup
()
{
DDRB |=
(
1
<< PB6
)
;
// Set PB6 as output
TCCR1A =
0
;
// Clear Timer1 registers
TCCR1B =
0
;
TIMSK1 =
0
;
OCR1A =
0
;
}
void
playNote
(
uint16_t
frequency)
{
if
(
notePlaying
)
{
TCCR1B =
0
;
// Stop the timer
notePlaying =
0
;
}
else
{
// Calculate the prescaler value
uint16_t
prescaler =
1
;
while
((
F_CPU /
(
prescaler * frequency *
2
))
>
65535
)
{
prescaler <<=
1
;
}
// Configure Timer1
TCCR1B =
(
1
<< WGM12
)
|
(
prescaler & 0x
07
)
;
// Mode 4, prescaler
OCR1A =
(
F_CPU /
(
prescaler * frequency *
2
))
-
1
;
// Output compare value
TIMSK1 =
(
1
<< OCIE1A
)
;
// Enable compare match interrupt
notePlaying =
1
;
// Start the timer
TCNT1 =
0
;
TCCR1B |=
(
1
<< CS10
)
|
((
prescaler >>
1
)
& 0x
03
)
;
// Start timer
}
}
ISR
(
TIMER1_COMPA_vect
)
{
PORTB ^=
(
1
<< PB6
)
;
// Toggle PB6 state
}
void
loop
()
{
if
(
Serial
.
available
()
>
0
)
{
char
key =
Serial
.
read
()
;
switch
(
key
)
{
case
'A':
playNote
(
440
)
;
break
;
case
'B':
playNote
(
494
)
;
break
;
case
'C':
playNote
(
523
)
;
break
;
case
'D':
playNote
(
587
)
;
break
;
case
'E':
playNote
(
659
)
;
break
;
case
'F':
playNote
(
698
)
;
break
;
case
'G':
playNote
(
784
)
;
break
;
case
'q':
TCCR1B =
0
;
// Stop the timer
notePlaying =
0
;
break
;
}
}
}
#define
F_CPU
16000000
UL
// CPU Frequency
#include
<avr/io.h>
#include
<util/delay.h>
volatile
uint8_t
notePlaying =
0
;
void
setup
()
{
DDRB |=
(
1
<< PB6
)
;
// Set PB6 as output
TCCR1A =
0
;
// Clear Timer1 registers
TCCR1B =
0
;
TIMSK1 =
0
;
OCR1A =
0
;
}
void
playNote
(
uint16_t
frequency)
{
if
(
notePlaying
)
{
TCCR1B =
0
;
// Stop the timer
notePlaying =
0
;
}
else
{
// Calculate the prescaler value
uint16_t
prescaler =
1
;
while
((
F_CPU /
(
prescaler * frequency *
2
))
>
65535
)
{
prescaler <<=
1
;
}
// Configure Timer1
TCCR1B =
(
1
<< WGM12
)
|
(
prescaler & 0x
07
)
;
// Mode 4, prescaler
OCR1A =
(
F_CPU /
(
prescaler * frequency *
2
))
-
1
;
// Output compare value
TIMSK1 =
(
1
<< OCIE1A
)
;
// Enable compare match interrupt
notePlaying =
1
;
// Start the timer
TCNT1 =
0
;
TCCR1B |=
(
1
<< CS10
)
|
((
prescaler >>
1
)
& 0x
03
)
;
// Start timer
}
}
ISR
(
TIMER1_COMPA_vect
)
{
PORTB ^=
(
1
<< PB6
)
;
// Toggle PB6 state
}
void
loop
()
{
if
(
Serial
.
available
()
>
0
)
{
char
key =
Serial
.
read
()
;
switch
(
key
)
{
case
'A':
playNote
(
440
)
;
break
;
case
'B':
playNote
(
494
)
;
break
;
case
'C':
playNote
(
523
)
;
break
;
case
'D':
playNote
(
587
)
;
break
;
case
'E':
playNote
(
659
)
;
break
;
case
'F':
playNote
(
698
)
;
break
;
case
'G':
playNote
(
784
)
;
break
;
case
'q':
TCCR1B =
0
;
// Stop the timer
notePlaying =
0
;
break
;
}
}
}
#define
F_CPU
16000000
UL
// CPU Frequency
#include
<avr/io.h>
#include
<util/delay.h>
volatile
uint8_t
notePlaying =
0
;
void
setup
()
{
DDRB |=
(
1
<< PB6
)
.
Please translate this into MIPS Assembly without using Psuedo-instruct.pdf
Please translate this into MIPS Assembly without using Psuedo-instruction.
int partition(int arr[], int low, int high) {
int pivot = arr[high];
int i = (low -1);
for (int j = low; j <= high - 1,j++) {
if (arr[j] <= pivot) {
i++
swap(&arr[i], &arr[j]);
}
}
swap(&arr[i + 1], &arr[high]);
return (i+1);
}
void quickSort (int arr[], int low, int high) {
if (low < high) {
int pi = partition(arr, low, high);
quickSort(arr,low,pi - 1);
quickSort(arr, pi + 1, high)"
}
}
.
clinical examination of hip joint (1).pdf
described clinical examination all orthopeadic conditions .
The History of Stoke Newington Street Names
Presented at the Stoke Newington Literary Festival on 9th June 2024
www.StokeNewingtonHistory.com
How to Build a Module in Odoo 17 Using the Scaffold Method
Odoo provides an option for creating a module by using a single line command. By using this command the user can make a whole structure of a module. It is very easy for a beginner to make a module. There is no need to make each file manually. This slide will show how to create a module using the scaffold method.
PCOS corelations and management through Ayurveda.
This presentation includes basic of PCOS their pathology and treatment and also Ayurveda correlation of PCOS and Ayurvedic line of treatment mentioned in classics.
How to Setup Warehouse & Location in Odoo 17 Inventory
In this slide, we'll explore how to set up warehouses and locations in Odoo 17 Inventory. This will help us manage our stock effectively, track inventory levels, and streamline warehouse operations.
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...National Information Standards Organization (NISO)
This presentation was provided by Steph Pollock of The American Psychological Association’s Journals Program, and Damita Snow, of The American Society of Civil Engineers (ASCE), for the initial session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session One: 'Setting Expectations: a DEIA Primer,' was held June 6, 2024.More Related Content
More from admin463580
Please solve Question 9- 8- P the.pdf
This very short document appears to be the beginning of instructions for solving a math problem but is cut off. It mentions solving Question 9 and the number 8 but does not provide enough context to form a complete summary.
Please show your work! Draw an UML class diagram showing the classes.pdf
Please show your work!
Draw an UML class diagram showing the classes and relationships for the situations described
below. Clearly identify the relationships as inheritance, association, aggregation etc. A Movie
Theater screens many movies (at different times) and a movie can be shown in multiple theaters.
A movie can be an animated movie or a live-action movie. A movie theater contains a box office
where tickets are sold or reserved..
Please simply answer the questions below using Internet research (Scho.pdf
The HALO Hydrogen Hub project is a proposed clean hydrogen production and transportation hub in the Midwestern United States led by a consortium of companies and research institutions. It aims to demonstrate production of hydrogen from renewable sources and its use for transportation and other applications. The project is expected to receive over $8 billion in funding from the 2021 Infrastructure Investment and Jobs Act and plans to be operational by 2026-2027. If successful, the HALO Hydrogen Hub could help decarbonize industries, create jobs, and establish the Midwest as a leader in clean hydrogen technology. However, the project also entails risks from any delays or cost overruns during development.
Please solve (b) The frequency distribution of heights of 100 college.pdf
Please solve
(b) The frequency distribution of heights of 100 college students is as follows: [ 1 0 Find (i) the
first quartile, (ii) the median, (iii) the third quartile, and (iv) inter-quartile range..
Please show the work for this question- The Voyager spacecraft has bee.pdf
Please show the work for this question.
The Voyager spacecraft has been transported by an alien being to the Delta Quadrant of space,
millions of light-years from Earth. Captain Janeway and her crew are attempting to plot the
shortest course home. Below is a network of the possible routes through the Delta Quadrant,
where the nodes are different worlds/planetary systems and the values on the branches are the
actual times, in years, between the nodes. a. Determine the shortest route from their present
location (at node 1) to Earth (node 22). Do NOT find the permanent set; only the short route to
Earth. b. When you are finished, give the total number of years it takes Voyager to reach Earth.
Note: This problem is continued in Part Two of the problem set where you will use Excel to
verify your solution..
please show the work to the numerical example i need help The Network.pdf
please show the work to the numerical example i need help
The Network and Ledger System - We know that there are two standard types of ledgers:
centralized and distributed. Can you design a ledger system that combines a centralized ledger
and a distributed ledger? Please illustrate [graphically or numerically]..
Please show that L is regular by creating a DFA- Consider the followin.pdf
L is the language that contains strings with an equal number of r's separated by a single t character where the t is followed by a single character from the alphabet {a,b}. To show L is regular, a deterministic finite automata (DFA) that accepts this language can be constructed.
please type all answers asap- i dont have figures- just do it without (1).pdf
please type all answers asap, i dont have figures. just do it without figure
6. Describe each of the different cloud types as shown on page 159 (cirrus, cirrostratus etc) 7.
Define and describe the four different types of fog. What are they like and where are they found?
8. Define and describe each of the types of precipitation. 9. Describe the four types of
atmospheric lifting.
Please the following is the currency class of perious one- class Curre.pdf
Please the following is the currency class of perious one.
class Currency {
protected:
int whole;
int fraction;
virtual std::string get_name() = 0;
public:
Currency() {
whole = 0;
fraction = 0;
}
Currency(double value) {
if (value < 0)
throw "Invalid value";
whole = int(value);
fraction = std::round(100 * (value - whole));
}
Currency(const Currency& curr) {
whole = curr.whole;
fraction = curr.fraction;
}
/* This algorithm gets the whole part or fractional part of the currency
Pre: whole, fraction - integer numbers
Post:
Return: whole or fraction
*/
int get_whole() { return whole; }
int get_fraction() { return fraction; }
/* This algorithm adds an object to the same currency
Pre: object (same currency)
Post:
Return:
*/
void set_whole(int w) {
if (w >= 0)
whole = w;
}
void set_fraction(int f) {
if (f >= 0 && f < 100)
fraction = f;
}
/* This algorithm adds an object to the same currency
Pre: object (same currency)
Post:
Return:
*/
void add(const Currency* curr) {
whole += curr->whole;
fraction += curr->fraction;
if (fraction > 100) {
whole++;
fraction %= 100;
}
}
/* This algorithm subtracts an object to the same currency
Pre: object (same currency)
Post:
Return:
*/
void subtract(const Currency* curr) {
if (!isGreater(*curr))
throw "Invalid Subtraction";
whole -= curr->whole;
if (fraction < curr->fraction) {
fraction = fraction + 100 - curr->fraction;
whole--;
}
else {
fraction -= curr->fraction;
}
}
/* This algorithm compares the an object of the same currency for equality or inequality
Pre: object (same currency)
Post:
Return: whole/fraction
*/
bool isEqual(const Currency& curr) {
return curr.whole == whole && curr.fraction == fraction;
}
/* This algorithm compares the an object of the same currency to determine which is greater or
smaller
Pre: object (same currency)
Post:
Return: true/false
*/
bool isGreater(const Currency& curr) {
if (whole < curr.whole)
return false;
if (whole == curr.whole && fraction < curr.fraction)
return false;
return true;
}
/* This algorithm prints the name and value of the currency object
Pre: value of whole, fraction, and the name
Post: whole, fraction, get_name()
Return:
*/
void print() {
std::cout << whole << "." << fraction << " " << get_name() << std::endl;
}
};
class Krone : public Currency {
protected:
/*
This algorithm gets the name for the Currency.
Pre: name - declared as string and initialized as Krone
Post:
Return: name
*/
std::string name = "Krone";
std::string get_name() {
return name;
}
public:
Krone() : Currency() { }
Krone(double value) : Currency(value) { }
Krone(Krone& curr) : Currency(curr) { }
};
class Soum : public Currency {
protected:
/* This algorithm gets the name for the Currency.
Pre: name - declared as string and initialized as Soum
Post:
Return: name
*/
std::string name = "Soum";
std::string get_name() {
return name;
}
public:
Soum() : Currency() { }
Soum(double value) : Currency(value) { }
Soum(Krone& curr) : Currency(curr) { }
};
A LinkNode structure or class which will have two attrib.
Please trace the execution of the following solution to the Dining Phi.pdf
Please trace the execution of the following solution to the Dining Philosopher problem.
#define N ___
enum status(EATING, HUNGRY, THINKING};
monitor diningPhilosophers {
status state[N];
condition self[N];
test(int i) {
if((state[(i-1) mod N] != EATING) &&
(state[i] == HUNGRY) &&
(state[(i+1) mod N] != EATING)) {
state[i] = EATING;
self[i].signal();
}
};
public:
diningPhilosophers() { // Initilization
for(int i = 0; i < N; i++) state[i] = THINKING;
};
test(int i) {
if((state[(i-1) mod N] != EATING) &&
(state[i] == HUNGRY) &&
(state[(i+1) mod N] != EATING)) {
state[i] = EATING;
self[i].signal();
};
};
public:
diningPhilosophers() {...};
pickUpForks(int i) {
state[i] = HUNGRY;
test(i);
if(state[i] != EATING) self[i].wait();
};
putDownForks(int i) {
state[i] = THINKING;
test((i-1) mod N);
test((i+1) mod N);
};
}.
please show elegoo arduino board setup using a passive buzzer- heres t.pdf
please show elegoo arduino board setup using a passive buzzer. heres the code below:
#define
F_CPU
16000000
UL
// CPU Frequency
#include
<avr/io.h>
#include
<util/delay.h>
volatile
uint8_t
notePlaying =
0
;
void
setup
()
{
DDRB |=
(
1
<< PB6
)
;
// Set PB6 as output
TCCR1A =
0
;
// Clear Timer1 registers
TCCR1B =
0
;
TIMSK1 =
0
;
OCR1A =
0
;
}
void
playNote
(
uint16_t
frequency)
{
if
(
notePlaying
)
{
TCCR1B =
0
;
// Stop the timer
notePlaying =
0
;
}
else
{
// Calculate the prescaler value
uint16_t
prescaler =
1
;
while
((
F_CPU /
(
prescaler * frequency *
2
))
>
65535
)
{
prescaler <<=
1
;
}
// Configure Timer1
TCCR1B =
(
1
<< WGM12
)
|
(
prescaler & 0x
07
)
;
// Mode 4, prescaler
OCR1A =
(
F_CPU /
(
prescaler * frequency *
2
))
-
1
;
// Output compare value
TIMSK1 =
(
1
<< OCIE1A
)
;
// Enable compare match interrupt
notePlaying =
1
;
// Start the timer
TCNT1 =
0
;
TCCR1B |=
(
1
<< CS10
)
|
((
prescaler >>
1
)
& 0x
03
)
;
// Start timer
}
}
ISR
(
TIMER1_COMPA_vect
)
{
PORTB ^=
(
1
<< PB6
)
;
// Toggle PB6 state
}
void
loop
()
{
if
(
Serial
.
available
()
>
0
)
{
char
key =
Serial
.
read
()
;
switch
(
key
)
{
case
'A':
playNote
(
440
)
;
break
;
case
'B':
playNote
(
494
)
;
break
;
case
'C':
playNote
(
523
)
;
break
;
case
'D':
playNote
(
587
)
;
break
;
case
'E':
playNote
(
659
)
;
break
;
case
'F':
playNote
(
698
)
;
break
;
case
'G':
playNote
(
784
)
;
break
;
case
'q':
TCCR1B =
0
;
// Stop the timer
notePlaying =
0
;
break
;
}
}
}
#define
F_CPU
16000000
UL
// CPU Frequency
#include
<avr/io.h>
#include
<util/delay.h>
volatile
uint8_t
notePlaying =
0
;
void
setup
()
{
DDRB |=
(
1
<< PB6
)
;
// Set PB6 as output
TCCR1A =
0
;
// Clear Timer1 registers
TCCR1B =
0
;
TIMSK1 =
0
;
OCR1A =
0
;
}
void
playNote
(
uint16_t
frequency)
{
if
(
notePlaying
)
{
TCCR1B =
0
;
// Stop the timer
notePlaying =
0
;
}
else
{
// Calculate the prescaler value
uint16_t
prescaler =
1
;
while
((
F_CPU /
(
prescaler * frequency *
2
))
>
65535
)
{
prescaler <<=
1
;
}
// Configure Timer1
TCCR1B =
(
1
<< WGM12
)
|
(
prescaler & 0x
07
)
;
// Mode 4, prescaler
OCR1A =
(
F_CPU /
(
prescaler * frequency *
2
))
-
1
;
// Output compare value
TIMSK1 =
(
1
<< OCIE1A
)
;
// Enable compare match interrupt
notePlaying =
1
;
// Start the timer
TCNT1 =
0
;
TCCR1B |=
(
1
<< CS10
)
|
((
prescaler >>
1
)
& 0x
03
)
;
// Start timer
}
}
ISR
(
TIMER1_COMPA_vect
)
{
PORTB ^=
(
1
<< PB6
)
;
// Toggle PB6 state
}
void
loop
()
{
if
(
Serial
.
available
()
>
0
)
{
char
key =
Serial
.
read
()
;
switch
(
key
)
{
case
'A':
playNote
(
440
)
;
break
;
case
'B':
playNote
(
494
)
;
break
;
case
'C':
playNote
(
523
)
;
break
;
case
'D':
playNote
(
587
)
;
break
;
case
'E':
playNote
(
659
)
;
break
;
case
'F':
playNote
(
698
)
;
break
;
case
'G':
playNote
(
784
)
;
break
;
case
'q':
TCCR1B =
0
;
// Stop the timer
notePlaying =
0
;
break
;
}
}
}
#define
F_CPU
16000000
UL
// CPU Frequency
#include
<avr/io.h>
#include
<util/delay.h>
volatile
uint8_t
notePlaying =
0
;
void
setup
()
{
DDRB |=
(
1
<< PB6
)
.
Please translate this into MIPS Assembly without using Psuedo-instruct.pdf
Please translate this into MIPS Assembly without using Psuedo-instruction.
int partition(int arr[], int low, int high) {
int pivot = arr[high];
int i = (low -1);
for (int j = low; j <= high - 1,j++) {
if (arr[j] <= pivot) {
i++
swap(&arr[i], &arr[j]);
}
}
swap(&arr[i + 1], &arr[high]);
return (i+1);
}
void quickSort (int arr[], int low, int high) {
if (low < high) {
int pi = partition(arr, low, high);
quickSort(arr,low,pi - 1);
quickSort(arr, pi + 1, high)"
}
}
.
More from admin463580 (12)
Please show your work! Draw an UML class diagram showing the classes.pdf
Please show your work! Draw an UML class diagram showing the classes.pdf
Please simply answer the questions below using Internet research (Scho.pdf
Please simply answer the questions below using Internet research (Scho.pdf
Please solve (b) The frequency distribution of heights of 100 college.pdf
Please solve (b) The frequency distribution of heights of 100 college.pdf
Please show the work for this question- The Voyager spacecraft has bee.pdf
Please show the work for this question- The Voyager spacecraft has bee.pdf
please show the work to the numerical example i need help The Network.pdf
please show the work to the numerical example i need help The Network.pdf
Please show that L is regular by creating a DFA- Consider the followin.pdf
Please show that L is regular by creating a DFA- Consider the followin.pdf
please type all answers asap- i dont have figures- just do it without (1).pdf
please type all answers asap- i dont have figures- just do it without (1).pdf
Please the following is the currency class of perious one- class Curre.pdf
Please the following is the currency class of perious one- class Curre.pdf
Please trace the execution of the following solution to the Dining Phi.pdf
Please trace the execution of the following solution to the Dining Phi.pdf
please show elegoo arduino board setup using a passive buzzer- heres t.pdf
please show elegoo arduino board setup using a passive buzzer- heres t.pdf
Please translate this into MIPS Assembly without using Psuedo-instruct.pdf
Please translate this into MIPS Assembly without using Psuedo-instruct.pdf
Recently uploaded
clinical examination of hip joint (1).pdf
described clinical examination all orthopeadic conditions .
The History of Stoke Newington Street Names
Presented at the Stoke Newington Literary Festival on 9th June 2024
www.StokeNewingtonHistory.com
How to Build a Module in Odoo 17 Using the Scaffold Method
Odoo provides an option for creating a module by using a single line command. By using this command the user can make a whole structure of a module. It is very easy for a beginner to make a module. There is no need to make each file manually. This slide will show how to create a module using the scaffold method.
PCOS corelations and management through Ayurveda.
This presentation includes basic of PCOS their pathology and treatment and also Ayurveda correlation of PCOS and Ayurvedic line of treatment mentioned in classics.
How to Setup Warehouse & Location in Odoo 17 Inventory
In this slide, we'll explore how to set up warehouses and locations in Odoo 17 Inventory. This will help us manage our stock effectively, track inventory levels, and streamline warehouse operations.
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...National Information Standards Organization (NISO)
This presentation was provided by Steph Pollock of The American Psychological Association’s Journals Program, and Damita Snow, of The American Society of Civil Engineers (ASCE), for the initial session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session One: 'Setting Expectations: a DEIA Primer,' was held June 6, 2024.Digital Artifact 1 - 10VCD Environments Unit
Digital Artifact 1 - 10VCD Environments Unit - NGV Pavilion Concept Design
How to Manage Your Lost Opportunities in Odoo 17 CRM
Odoo 17 CRM allows us to track why we lose sales opportunities with "Lost Reasons." This helps analyze our sales process and identify areas for improvement. Here's how to configure lost reasons in Odoo 17 CRM
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
RPMS Template 2023-2024 by: Irene S. Rueco
Main Java[All of the Base Concepts}.docx
This is part 1 of my Java Learning Journey. This Contains Custom methods, classes, constructors, packages, multithreading , try- catch block, finally block and more.
BBR 2024 Summer Sessions Interview Training
Qualitative research interview training by Professor Katrina Pritchard and Dr Helen Williams
Hindi varnamala | hindi alphabet PPT.pdf
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...Nguyen Thanh Tu Collection
https://app.box.com/s/y977uz6bpd3af4qsebv7r9b7s21935vdCommunity pharmacy- Social and preventive pharmacy UNIT 5
Covered community pharmacy topic of the subject Social and preventive pharmacy for Diploma and Bachelor of pharmacy
Recently uploaded (20)
How to Build a Module in Odoo 17 Using the Scaffold Method
How to Build a Module in Odoo 17 Using the Scaffold Method
Film vocab for eal 3 students: Australia the movie
Film vocab for eal 3 students: Australia the movie
How to Setup Warehouse & Location in Odoo 17 Inventory
How to Setup Warehouse & Location in Odoo 17 Inventory
Pride Month Slides 2024 David Douglas School District
Pride Month Slides 2024 David Douglas School District
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
How to Manage Your Lost Opportunities in Odoo 17 CRM
How to Manage Your Lost Opportunities in Odoo 17 CRM
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
Community pharmacy- Social and preventive pharmacy UNIT 5
Community pharmacy- Social and preventive pharmacy UNIT 5
Plot the monthly average data presented in Table 1 onto the blank grap.pdf
- 1. Plot the monthly average data presented in Table 1 onto the blank graph provided below. Use a different colored pencil for each location (blue for Deadhorse, green for Beijing, and red for Kampala) and connect the points with a line. 2. Which regions are these cities located, Tropical, Mid-latitude, or Polar Regions? 3. Briefly describe the seasonal variations of the three cities.