Piston step seal gsd
•
0 likes•132 views
MORE DETAILS PLZ VISIT WWW.WALLESEALS.COM OR EMAIL TO INFO@WALLESEALS.COM
Report
Share
Report
Share
Download to read offline
Recommended
Turcon quad ring ， x-rings，four lip seals
Our company produce many series of hydraulic and pneumatic seals. Such as Perfuoroelastomer seals, Spring energised seals, PTFE rotary seals, Valve seals, FFKM O ring, X-ring, square ring, PTFE rubber diaphragm, BT-seals, FS-seals, T-seals, S-seals, Metal end cap seals, Mechanical seals, gland packing, chevron seals, glyd ring, Guide tape, oil seal and so on.
We also produce seals of these material , include NBR, HNBR, EPDM, PU, FVMQ,FEPM,FFKM, Viton A, Viton B, Viton F, Viton GF, Viton AED, GLT, ETP, Aflas, ACM, AEM, VMQ .
Turcon varilip pdr
Turcon Varilip PDR rotary shaft seals extend the
boundaries imposed by elastomer radial shaft seals,
utilizing advanced materials and design techniques to
provide optimum sealing performance for each
application. The outcome is a superior sealing solution,
which retains a compact seal envelope.
CNG NGV fuel nozzel lip seals
We also produce seals of these material , include NBR, HNBR, EPDM, PU, FVMQ,FEPM, Viton A, Viton B, Viton F, Viton GF, GLT, ETP, Aflas, ACM, AEM, VMQ .
Walleseals company can make equivalent products as per many famous brand, such as TRELLEBORG, Parker, Merkel, Simrit, SKF, Sain-Gobain, Busak+shamban, B+S, Hallite, DLI, James walker, TTO, NOK, Valqua, Tecnolan, DZ, Eriks and so on.
Cfw oil seal merkel rotary shaft seal-dichtomatik-nok shaft seal-skf oil seal...
Cfw oil seal,TC oil seals, SC shaft seals,merkel rotary shaft seal,dichtomatik-nok shaft sea,-skf oil seal,fkm oil seal,EPDM oil seal
Kalrez o ring,Dupont perfluoroelastomer o ring,FFKM O ring,PAROFLUOR (FFKM) O...
We also produce seals of these material , include NBR, HNBR, EPDM, PU, FVMQ,FEPM, Viton A, Viton B, Viton F, Viton GF, GLT, ETP, Aflas, ACM, AEM, VMQ .
Saint-Gobain's OmniSeal Spring-Energized seals,turcon variseal r m2,peek vari...
Dongguan Walle Sealing Technology Development Co., Ltd is a company located in Xinguchong Industrial Area, Wanjiang District, Dongguan City, Guangdong Province, China. The contact person for the company is Banana Yuan who can be reached by phone at +86-13724575770 or by email at info@walleseals.com.
China Zurcon slydring
Z80 is an ultra high molecular weight polyethylene material recommended for use in food applications and water hydraulics due to its excellent friction and wear properties. It has advantages such as good lubrication, self-lubrication, low friction, no water absorption, FDA compliance, chemical resistance, and high wear resistance. The material can operate at velocities up to 6.6 ft/s, temperatures from -76°F to 176°F, and radial pressures up to 3,625 psi at 77°F and 1,450 psi from 140°F to 176°F.
China Turcite slydring wear ring
Turcite® Slydring® is a wear ring material used in hydraulic components with reciprocating movement. It is made of bronze filled Turcite® T47, which provides low friction, high resistance to wear, heat and chemicals. It has minimal static and dynamic friction for smooth operation even at low speeds. The Turcite® Slydring® has a long service life and is suitable for use with mineral oils, hydraulic fluids, and other liquids depending on the Turcite® material. It can operate at velocities up to 10.8 feet per second and temperatures from -71°F to 302°F.
Recommended
Turcon quad ring ， x-rings，four lip seals
Our company produce many series of hydraulic and pneumatic seals. Such as Perfuoroelastomer seals, Spring energised seals, PTFE rotary seals, Valve seals, FFKM O ring, X-ring, square ring, PTFE rubber diaphragm, BT-seals, FS-seals, T-seals, S-seals, Metal end cap seals, Mechanical seals, gland packing, chevron seals, glyd ring, Guide tape, oil seal and so on.
We also produce seals of these material , include NBR, HNBR, EPDM, PU, FVMQ,FEPM,FFKM, Viton A, Viton B, Viton F, Viton GF, Viton AED, GLT, ETP, Aflas, ACM, AEM, VMQ .
Turcon varilip pdr
Turcon Varilip PDR rotary shaft seals extend the
boundaries imposed by elastomer radial shaft seals,
utilizing advanced materials and design techniques to
provide optimum sealing performance for each
application. The outcome is a superior sealing solution,
which retains a compact seal envelope.
CNG NGV fuel nozzel lip seals
We also produce seals of these material , include NBR, HNBR, EPDM, PU, FVMQ,FEPM, Viton A, Viton B, Viton F, Viton GF, GLT, ETP, Aflas, ACM, AEM, VMQ .
Walleseals company can make equivalent products as per many famous brand, such as TRELLEBORG, Parker, Merkel, Simrit, SKF, Sain-Gobain, Busak+shamban, B+S, Hallite, DLI, James walker, TTO, NOK, Valqua, Tecnolan, DZ, Eriks and so on.
Cfw oil seal merkel rotary shaft seal-dichtomatik-nok shaft seal-skf oil seal...
Cfw oil seal,TC oil seals, SC shaft seals,merkel rotary shaft seal,dichtomatik-nok shaft sea,-skf oil seal,fkm oil seal,EPDM oil seal
Kalrez o ring,Dupont perfluoroelastomer o ring,FFKM O ring,PAROFLUOR (FFKM) O...
We also produce seals of these material , include NBR, HNBR, EPDM, PU, FVMQ,FEPM, Viton A, Viton B, Viton F, Viton GF, GLT, ETP, Aflas, ACM, AEM, VMQ .
Saint-Gobain's OmniSeal Spring-Energized seals,turcon variseal r m2,peek vari...
Dongguan Walle Sealing Technology Development Co., Ltd is a company located in Xinguchong Industrial Area, Wanjiang District, Dongguan City, Guangdong Province, China. The contact person for the company is Banana Yuan who can be reached by phone at +86-13724575770 or by email at info@walleseals.com.
China Zurcon slydring
Z80 is an ultra high molecular weight polyethylene material recommended for use in food applications and water hydraulics due to its excellent friction and wear properties. It has advantages such as good lubrication, self-lubrication, low friction, no water absorption, FDA compliance, chemical resistance, and high wear resistance. The material can operate at velocities up to 6.6 ft/s, temperatures from -76°F to 176°F, and radial pressures up to 3,625 psi at 77°F and 1,450 psi from 140°F to 176°F.
China Turcite slydring wear ring
Turcite® Slydring® is a wear ring material used in hydraulic components with reciprocating movement. It is made of bronze filled Turcite® T47, which provides low friction, high resistance to wear, heat and chemicals. It has minimal static and dynamic friction for smooth operation even at low speeds. The Turcite® Slydring® has a long service life and is suitable for use with mineral oils, hydraulic fluids, and other liquids depending on the Turcite® material. It can operate at velocities up to 10.8 feet per second and temperatures from -71°F to 302°F.
China turcon Slydring wear ring for piston
This document provides a table listing specifications for Slydring® wear rings for pistons. It includes the ordering code, dimensions such as bore diameter, groove diameter, groove width, and thickness for various sizes ranging from 1.250 to 20.000 inches. The table is separated into different part numbers depending on the groove width specification. The document notes that more details can be found on the company's website.
China Turcon Slydring for rod
This document lists part numbers and specifications for Slydring® wear rings for rods. It provides the inner diameter, outer diameter, width, and thickness for over 200 wear ring part numbers, organized into different series based on material thickness. The part numbers and specifications are for ordering from TSS.
China turcon HiMod slydring
HiMod Slydring is a type of wear ring made from specialized thermoplastic materials that can withstand medium to high loads in hydraulic cylinders. There are three standard grades available: HiMod HM061 uses glass fiber-reinforced polyacetal; HiMod HM803 uses glass fiber-reinforced heat-stabilized polyamid; and HiMod HM852 uses glass fiber-reinforced heat-stabilized polyamid with PTFE. The document then provides further details on the properties of one version, HiMod HM061, which offers advantages like high compressive strength, wear resistance, and stiffness.
China Turcon excluder 5
TURCON EXCLUDER 5
Double-Acting -
- O—Ring-Energized Scraper -
- Material -
- Turcon and Zurcon -
Materials
The following material combination has proven effective
for most applications:
Excluder: Turcon T46
O—Ring: NBR, 70 Shore A
Set Code: T46N
For other applications, other material combinations as
listed in Table XIII may also be used.
China Turcon excluder 2
TURCON EXCLUDER 2
Double-Acting -
- O—Ring-Energized Scraper -
- Material -
- Turcon or Zurcon + Elastomer -
Materials
The following material combination has proven effective
for most applications:
Excluder: Turcon T46
O—Ring: NBR, 70 Shore A
For other applications, other material combinations as
listed in Table X, may also be used
China Turcon Scraper WSA
The SCRAPER WSA is a single-acting metal-encased wiper made of NBR and metal materials. It has advantages such as being space-saving, low cost, and having a simple construction groove that provides a firm fit. Its standard application is in hydraulic cylinders, agriculture machinery, construction machinery, lift trucks, and mobile hydraulics. The document provides installation dimensions and part numbers for a variety of SCRAPER WSA sizes.
China Scraper WRM
SCRAPER WRM
Single-Acting -- Material -- NBR Elastomer
Materials
Standard application:
Nitrile elastomer NBR 90 Shore A
Material code: N9
China Zurcon scraper WKE
This document provides information on the Zurcon Scraper WKE Single-Acting - Metal-Encased Wiper. It is made of Zurcon polyurethane encased in a non-alloyed steel case. It has advantages like a space-saving construction, high wear resistance, and a simple groove design. It is recommended for use in mobile hydraulic machinery, agriculture machinery, construction machinery, and lift trucks where there are dusty and humid conditions. The document lists available part numbers and dimensions for the wipers.
China ZURCON SCRAPER DA 24
The Zurcon scraper DA 24 is a double-acting scraper made from Zurcon polyurethane material. It has high wear resistance, low deformation, and resistance to extrusion. It provides very good sealing and scraping effects for construction, agriculture, forestry, and mobile hydraulics applications where there is high dirt attack and side steering of the piston rod. The scraper works together with Zurcon's RU-9 rod seal system and buffer seal, and is available in a variety of installation dimensions.
China TURCON VARISEAL M2
The Turcon Variseal M2 is a single-acting, spring-energized seal that features a Turcon U-cup. It is resistant to chemicals and fluids, has low friction, and handles temperature changes well. It is used in applications like valves, pumps, and dosing devices. The seal ring is typically made from Turcon T40 material and the spring is stainless steel. It is suitable for pharmaceutical and food applications.
China POLYPAC - VEEPAC CH/G1
POLYPAC - VEEPAC CH/G1
Single-Acting -
- Chevron Vee Packing Set -
- With Support and Pressure-Energizing Ring -
- Material -
- POM, PTFE, Fabric-Reinforced Rubber
China Polypac selemaster dsm
POLYPAC® - SELEMASTER DSM
- Double-Acting - - Combined Seal and Wear Ring -
- Material :
- NBR + Fiber-Reinforced NBR + POM
China COMPACT SEAL D A S TYPE A/B
China COMPACT SEAL D A S TYPE A/B
Double-Acting -
- Combined Seal and Wear Ring -
- Material -
- NBR, Polyester Elastomer + POM
China Zurcon wynseal
ZURCON WYNSEAL
Advantages
- High static and dynamic sealing effect
- High abrasion resistance
- Simple groove design, one-piece piston possible
- Suitable for grooves to ISO 7425, Part 1
* Because of cross-sectional area constraints, PW10 and
PW11 cross sections do not have the center support
Buldge.
China Zurcon L cup
The Zurcon® L-Cup® is a single-acting low-friction seal that provides hydrodynamic back-pumping ability, low friction to reduce heat generation, low breakout force, and very low stick-slip. It has high extrusion resistance, optimal sealing lip geometry for high sealing ability, and no entrapped oil or grease between the seal and groove. The Zurcon® L-Cup® was designed to meet customer demands and is interchangeable with existing U-Cup grooves.
Zurcon glyd ring p
The Zurcon® Glyd Ring® P is a double-acting elastomer-energized slipper seal that provides easy installation, tolerance for soiled media, long service life, and resistance to shock loads. It is recommended for heavy-duty applications such as construction equipment, cranes, and forklifts. The seal comes in standard, low temperature, and high temperature materials to accommodate a variety of operating conditions and media types.
China Turcon vl seal
The TURCON® VL SEAL is a single-acting O-ring energized slipper seal that has several advantages over traditional rod seals, including a reduced radial depth allowing for a smaller gland size, tighter leakage control, lower friction from a reduced contact area, and simplicity of design using a standard size O-ring. It features Turcon's Stepseal® 2K back pumping effect and seal geometry that prevents seal roll at low or shuffling pressures. It can operate at pressures up to 5,000 psi with velocities up to 50 ft/s on reciprocating movements from -65°F to +390°F depending on the elastomer material. Standard materials include mineral oil-based hydraulic fluids and others depending
China Turcon variseal M2
The document describes the Turcon Variseal M2 single-acting spring-energized seal. It lists the materials used to make the seal ring and spring, including that they are physiologically safe. It also describes advantages like resistance to fluids and chemicals, low friction, precision control, and ability to handle rapid temperature changes without contamination. The document provides ordering codes for the product.
China Turcon stepseal 2 k
The Turcon Stepseal 2K is a single-acting piston seal that provides high static and dynamic sealing with low friction. It has advantages like stick-slip-free operation, abrasion resistance, long service life, and compatibility with many temperatures and chemicals. The seal is recommended for injection molding machines, machine tools, presses, and floating piston accumulators. It uses a Turcon T46 seal ring and NBR or FKM o-ring depending on the application temperature.
Turcon glyd ring c
The document discusses the Turcon® O-Ring-Energized Slipper Seal, which is a double-acting seal suitable for use in hydraulic components. It has advantages like smooth operation, low friction, long service life, and compatibility with various fluids. Applications include machine tools, robotics, valves, and brake systems. The seal consists of a Turcon® T46 seal ring and an O-ring energizer in NBR or FKM rubber. Standard seals are for use with mineral oils, while various materials allow use in other fluids and temperatures.
More Related Content
More from Banana Yuan
China turcon Slydring wear ring for piston
This document provides a table listing specifications for Slydring® wear rings for pistons. It includes the ordering code, dimensions such as bore diameter, groove diameter, groove width, and thickness for various sizes ranging from 1.250 to 20.000 inches. The table is separated into different part numbers depending on the groove width specification. The document notes that more details can be found on the company's website.
China Turcon Slydring for rod
This document lists part numbers and specifications for Slydring® wear rings for rods. It provides the inner diameter, outer diameter, width, and thickness for over 200 wear ring part numbers, organized into different series based on material thickness. The part numbers and specifications are for ordering from TSS.
China turcon HiMod slydring
HiMod Slydring is a type of wear ring made from specialized thermoplastic materials that can withstand medium to high loads in hydraulic cylinders. There are three standard grades available: HiMod HM061 uses glass fiber-reinforced polyacetal; HiMod HM803 uses glass fiber-reinforced heat-stabilized polyamid; and HiMod HM852 uses glass fiber-reinforced heat-stabilized polyamid with PTFE. The document then provides further details on the properties of one version, HiMod HM061, which offers advantages like high compressive strength, wear resistance, and stiffness.
China Turcon excluder 5
TURCON EXCLUDER 5
Double-Acting -
- O—Ring-Energized Scraper -
- Material -
- Turcon and Zurcon -
Materials
The following material combination has proven effective
for most applications:
Excluder: Turcon T46
O—Ring: NBR, 70 Shore A
Set Code: T46N
For other applications, other material combinations as
listed in Table XIII may also be used.
China Turcon excluder 2
TURCON EXCLUDER 2
Double-Acting -
- O—Ring-Energized Scraper -
- Material -
- Turcon or Zurcon + Elastomer -
Materials
The following material combination has proven effective
for most applications:
Excluder: Turcon T46
O—Ring: NBR, 70 Shore A
For other applications, other material combinations as
listed in Table X, may also be used
China Turcon Scraper WSA
The SCRAPER WSA is a single-acting metal-encased wiper made of NBR and metal materials. It has advantages such as being space-saving, low cost, and having a simple construction groove that provides a firm fit. Its standard application is in hydraulic cylinders, agriculture machinery, construction machinery, lift trucks, and mobile hydraulics. The document provides installation dimensions and part numbers for a variety of SCRAPER WSA sizes.
China Scraper WRM
SCRAPER WRM
Single-Acting -- Material -- NBR Elastomer
Materials
Standard application:
Nitrile elastomer NBR 90 Shore A
Material code: N9
China Zurcon scraper WKE
This document provides information on the Zurcon Scraper WKE Single-Acting - Metal-Encased Wiper. It is made of Zurcon polyurethane encased in a non-alloyed steel case. It has advantages like a space-saving construction, high wear resistance, and a simple groove design. It is recommended for use in mobile hydraulic machinery, agriculture machinery, construction machinery, and lift trucks where there are dusty and humid conditions. The document lists available part numbers and dimensions for the wipers.
China ZURCON SCRAPER DA 24
The Zurcon scraper DA 24 is a double-acting scraper made from Zurcon polyurethane material. It has high wear resistance, low deformation, and resistance to extrusion. It provides very good sealing and scraping effects for construction, agriculture, forestry, and mobile hydraulics applications where there is high dirt attack and side steering of the piston rod. The scraper works together with Zurcon's RU-9 rod seal system and buffer seal, and is available in a variety of installation dimensions.
China TURCON VARISEAL M2
The Turcon Variseal M2 is a single-acting, spring-energized seal that features a Turcon U-cup. It is resistant to chemicals and fluids, has low friction, and handles temperature changes well. It is used in applications like valves, pumps, and dosing devices. The seal ring is typically made from Turcon T40 material and the spring is stainless steel. It is suitable for pharmaceutical and food applications.
China POLYPAC - VEEPAC CH/G1
POLYPAC - VEEPAC CH/G1
Single-Acting -
- Chevron Vee Packing Set -
- With Support and Pressure-Energizing Ring -
- Material -
- POM, PTFE, Fabric-Reinforced Rubber
China Polypac selemaster dsm
POLYPAC® - SELEMASTER DSM
- Double-Acting - - Combined Seal and Wear Ring -
- Material :
- NBR + Fiber-Reinforced NBR + POM
China COMPACT SEAL D A S TYPE A/B
China COMPACT SEAL D A S TYPE A/B
Double-Acting -
- Combined Seal and Wear Ring -
- Material -
- NBR, Polyester Elastomer + POM
China Zurcon wynseal
ZURCON WYNSEAL
Advantages
- High static and dynamic sealing effect
- High abrasion resistance
- Simple groove design, one-piece piston possible
- Suitable for grooves to ISO 7425, Part 1
* Because of cross-sectional area constraints, PW10 and
PW11 cross sections do not have the center support
Buldge.
China Zurcon L cup
The Zurcon® L-Cup® is a single-acting low-friction seal that provides hydrodynamic back-pumping ability, low friction to reduce heat generation, low breakout force, and very low stick-slip. It has high extrusion resistance, optimal sealing lip geometry for high sealing ability, and no entrapped oil or grease between the seal and groove. The Zurcon® L-Cup® was designed to meet customer demands and is interchangeable with existing U-Cup grooves.
Zurcon glyd ring p
The Zurcon® Glyd Ring® P is a double-acting elastomer-energized slipper seal that provides easy installation, tolerance for soiled media, long service life, and resistance to shock loads. It is recommended for heavy-duty applications such as construction equipment, cranes, and forklifts. The seal comes in standard, low temperature, and high temperature materials to accommodate a variety of operating conditions and media types.
China Turcon vl seal
The TURCON® VL SEAL is a single-acting O-ring energized slipper seal that has several advantages over traditional rod seals, including a reduced radial depth allowing for a smaller gland size, tighter leakage control, lower friction from a reduced contact area, and simplicity of design using a standard size O-ring. It features Turcon's Stepseal® 2K back pumping effect and seal geometry that prevents seal roll at low or shuffling pressures. It can operate at pressures up to 5,000 psi with velocities up to 50 ft/s on reciprocating movements from -65°F to +390°F depending on the elastomer material. Standard materials include mineral oil-based hydraulic fluids and others depending
China Turcon variseal M2
The document describes the Turcon Variseal M2 single-acting spring-energized seal. It lists the materials used to make the seal ring and spring, including that they are physiologically safe. It also describes advantages like resistance to fluids and chemicals, low friction, precision control, and ability to handle rapid temperature changes without contamination. The document provides ordering codes for the product.
China Turcon stepseal 2 k
The Turcon Stepseal 2K is a single-acting piston seal that provides high static and dynamic sealing with low friction. It has advantages like stick-slip-free operation, abrasion resistance, long service life, and compatibility with many temperatures and chemicals. The seal is recommended for injection molding machines, machine tools, presses, and floating piston accumulators. It uses a Turcon T46 seal ring and NBR or FKM o-ring depending on the application temperature.
Turcon glyd ring c
The document discusses the Turcon® O-Ring-Energized Slipper Seal, which is a double-acting seal suitable for use in hydraulic components. It has advantages like smooth operation, low friction, long service life, and compatibility with various fluids. Applications include machine tools, robotics, valves, and brake systems. The seal consists of a Turcon® T46 seal ring and an O-ring energizer in NBR or FKM rubber. Standard seals are for use with mineral oils, while various materials allow use in other fluids and temperatures.