The document provides information about the Post Graduate Common Entrance Test (PG CET) for engineering programs offered by various universities in Karnataka, India. It specifies that the test will be held on July 1, 2017 from 2:30 pm to 4:30 pm. It will have 100 multiple choice questions, with 50 questions carrying 1 mark each and 25 questions carrying 2 marks each. The document also provides instructions to candidates regarding properly filling the answer sheet and details about question paper versions and serial numbers.
gate question paper ME to help you prepare well for the exam .dfgdfgfdgdf gffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff ggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggg
gate question paper ME to help you prepare well for the exam .dfgdfgfdgdf gffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff ggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggg
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Governing Equations for Fundamental Aerodynamics_Anderson2010.pdf
PGCET Civil 2017 question paper
1. POST GRADUATE COMMON ENTRANCE TEST-2017
DATE and TIME COURSE SUBJ ECT
01-07-2017
2.30 p.m. to 4.30 p.m.
ME/M.Tech/M.Arch/
courses offered by
VTU/UVCE/UBDTCE
CIVIL
ENGINEERING
MAXIMUM MARKS TOTAL DURATION MAXIMUM TIME FOR ANSWERING
100 150 Minutes 120 Minutes
MENTION YOUR PGCE'l NO. QUESTION BOOKLET DETAILS
VERSION CODE SERIAL NUMBER
A - 1 101585
DOs :
I. • Check whether the PGC'ET No. has been entered and shaded in the respective circles on the OMR answer sheet.
2. Ensure whether the circles corresponding to course and the specific branch have been shaded on the ONIR
answer sheet.
This Question Booklet is issued to you by the invigilator after the 2" Bell i.e., after 2.25 p.m.
4. The Serial Number of this question booklet should be entered and the respective circles should also be shaded
completely on the OMR answer sheet. • .
5. The Version Code of this question booklet should be entered on the OMR answer sheet and the respective circles
should also be shaded completely on the OMR answer sheet.
6. Compulsorily sign at the bottom portion of the OMR answer sheet in the space provided.
DON 'Ts :
I. THE TIMING AND MARKS PRINTED ON THE OMR ANSWER SHEET SHOULD NOT BE
DAMAGED / MUTILATED / SPOILED.
2. The 3"' Bell rings at 2.30 p.m., till then;
• Do not remove the paper seal / polythene bag of this question booklet.
• Do not look inside this question booklet.
• Do not start answeriitg on the OMR answer sheet.
IMPORTANT INSTRUCTIONS TO CANDIDATES
I. This question booklet contains 75 (items) questions and each question will have one statement and four answers.
(Four different options / responses.)
2. After the 3"' Bell is rung at 2.30 p.m., remove the paper seal / polythene bag of this question booklet and check
that this booklet does not have any unprinted or torn or missing pages or items etc., if so. get it replaced by a
complete test booklet. Read each item and start answering on the OMR answer sheet.
During.- the subsequent 120 minutes:
• Read each question (item) carefully.
• Choose one correct answer from out of the four available responses (options / choices) given under
each question / item. In case you feel that there is more than one correct response, mark the response
which you consider the best. In any. case, choose only one response for each item.
• Completely darken / shade the relevant circle with a BLUE OR BLACK INK BALL POINT PEN
a ainst the ( uestion number on the OMR answer sheet.
Correct Method of shading the circle on the OMR answer sheet is as shown below i
4. Use the space provided on each page of the question booklet for Rough Work. Do not use the OMR answer sheet
for the same.
5. After the last Bell is rung at 4.30 pm, stop marking on the OMR answer sheet and affix your, left hand thumb
impression on the OMR answer sheet as per the instructions.
6. liandover the OMR ANSWER SHEET to the room invigilator as it is.
7. After separating the top sheet (KEA copy), the invigilator will return the bottom sheet replica (Candidate's copy)
to you to carry tome for self-evaluation.
X. Preserve the replica of the OMR answer sheet for a minimum period of ONE year.
9. Only Non-programmable calculators are allowed.
Marks Distribution
PART-I : 50 QUESTIONS- CARRY ONE MARK EACH (I TO 50)
PART-2 : 25 QUESTIONS CARRY TWO MARKS EACH (51 TO 75)
cE_Ai 111111111111111111111111
2. CIVIL ENGINEERING
PART — 1
Each question carries one mark. (50 x 1 = 50)
1. Strain energy of a member is
(A) function of load only
(B) function of strains and stresses
(C) directly proportional to strains
(D) directly proportional to stresses
2. For a linear system, type of
displacement function for strain
energy is
(A) Linear
(B) Quadratic
(C) Cubic
(D) Quartic
4. For a linear elastic system,
minimization of potential energy
yields
(A) compatibility conditions
(B) equilibrium equations
(C) constitutive relations
(D) strain displacement relations
5. The XY segment in a curved member
with straight vertical leg carrying load.
`W' at point 'Z' is subjected to
Y
4-Vertical member
(A)
(B)
(C)
(D)
3. The minimum number of members
required to form a simple truss is
(A)
(B) 3
(C) 4
(D) 5
X
BM, SF and Axial Force
Axial force only
BM and SF
BM and axial force only
Space For Rough Work
CE 3 A-1
3. 6. The colour of Granite is
(A) Grey
(B) Green
(C) Brown
(D) All of these
7. The defect caused due to over maturity
, and unventilated storage of the wood
during its transit is called
(A) knot
(B) rind gall
(C) foxiness
(D) heart shake
8. The number of independent displacement
components at each joint of a rigid
jointed space frame is
(A) I
(B)
(C) 3
(D) 6
9. The rigid jointed frame shown in
figure is
(A) unstable
(B) stable and statically determinate
(C) stable and statically indeterminate
(D) statically indeterminate by /nd
degree
10. The ratio of maximum shear stress to
average shear stress for a rectangular
section is
(A) 1.28
(B) 1.50
(C) 1.33
(D) 1.55
Space For Rough Work
A-1 4 CE
4. (A) Coplanar concurrent forces
(B) Non-coplanar concurrent forces
(C) Coplanar-non-concurrent forces
(D) Coplanar parallel forces
12. Impact test enables one to estimate the
property of
(A) hardness
(B) toughness
(C) creep
(D) strength
13. Proof resilience is the maximum
energy stored at
(A) limit of proportionality
(B) elastic limit
(C) plastic limit
(D) shrinkage limit
(A) P
(B) Q
(C) S
(D) R
15. A reinforced concrete structure has to
be constructed along a sea coast. The
minimum grade of concrete to be used
as per IS 456-2000 is
(A) M-15
(B) M-20
(C) M-25
(D) M-30
16. The Poisson's ratio is defined as
(A) axial stress/lateral stress
(B) lateral strain/axial strain
(C) lateral stress/axial stress
(D) axial strain/lateral strain
13
14. The possible location of shear centre
of the channel section shown in. fig. is
11. Forces in the legs of a tripod stand is
an example for
Space For Rough Work
CE 5 A-1
5. 17. For an isotropic material, relation
between Young's Modulus (E), Shear
Modulus (G) and Poisson's ratio (t) is
given by
(A) G —
2(l +p)
(B) G —
(I+2p)
E
(D) G —
18. The main principle of surveying is to
work
(A) from part to the whole
(B) from whole to the part
(C) from higher level to the lower
level
(D) from lower level to higher level
19. The line normal to the plumb line is
known as
(A) horizontal line
(B) level line
(C) datum line
(D) vertical line
20. Closed contours of decreasing values
towards their centre represents
(A) a hill
(B) a depression
(C) a saddle or pass
(D) a river bed
21. Planimeter is used tbr measuring
(A) area
(B) volume
(C) contour..gradient
(D) slope angle
22. The advantage of providing super
elevation on roads is
(A) higher speed of vehicles
(B) increased volume of traffic
(C) reduced maintenance cost of the
roads
(D) All of the above
23. Staggered rail joints are generally
provided
(A) on curves
(B) on tangents
(C) on bridges
(D) in tunnels
(C) G —
2( — 2p)
E
2( l +3p)
Space For Rough-Work
A-1 6 CE
6. 24. Surf zone is
(A) the fathom line of 10 m depth
(B) the fathom line of 5 m depth
(C) the swell of the sea breaking on
the shore or reefs
(D) the coast line attacked by the
kvaves
25. If F is the fetch, the straight line
distance of open water available in
kilometres, the height of the wave in
metres is
(A) 0.15 j
(B) 0.20 j
(C) 0.28 -Nff
(D) 0.34
26. The Kuichlings formula to determine
the rate of fire demand is
(A) Q=4637 -5 [1 —0.01 J]
(B) Q= 3182 VII
(C) Q = 1136 [0.1 P + 10]
(D) None of the above
27. Air binding may occur in
(A) Sewers
(B) Artesian well
(C) Aerator
(D) Filter
28. Composting and Lagooning are the
methods of
(A) Sludge digestion
(B) Sludge disposal
(C) Sedimentation
(D) Filtration
29. The effective size of sand particles
used in slow sand filters is
(A) 0.25 to 0.35 mm
(B) 0.35 to 0.60 mm
(C) 0.60 to 1.00 min
(D) 1.00 to 1.80 mm
30. If pan evaporation is denoted by E r
and actual evaporation by E, then
(A) E p > E
(B) E> E p
(C) E= E p
(D) E E p
Space For Rough Work
CE 7 A-1•
7. 31. In order to prepare 2 hour unit
hydrograph from a 6 hour unit
hydrograph, which of the following
method will be applied ?
(A) Synthetic Unit Hydrograph
(B) S-curve Method
(C) Instantaneous Unit Hydrograph
(D) Simple Unit Hydrograph
32. The amount of water stored in a river
channel without any artificial storage
is called
(A) Bank storage
(B) River storage
(C) Valley storage
(D) Dead storage
33. The ratio of 5 day BOD to ultimate
BOD is about
(A) 1/3
(B) 1/3
(C) 3/4
(D) 1.0
34. The effect of increasing diameter- of
sewer on the self cleaning velocity is
(A) to decrease it
(B) to increase it
(C) fluctuating
(D) nil
35. Specific weight of liquid
(A) remains constant at every place.
(B) does not remain constant at
every place.
(C) varies from place to place on the
earth.
(D) does not vary on any other
planet.
36. Fluids change the volume under
external pressure due to
(A) Plasticity
(B) Viscosity
(C) Compressibility
(D) Tension
Space For Rough Work
A-1 8 CE
8. 37. In an open tube, free surface of
mercury remains
(A) horizontal
(B) curved upwards
(C) curved downwards
(D) level
38. The unit of the viscosity is
(A) kg-s/ m2
(B) N-s/n1
(C) N-S
,
/ 1113
(D) m- /s
39. A • floating body attains stable
equilibrium if its metacentre is
(A) above the centroid
(B) at the centroid
(C) below the centroid
(D) anywhere
40. Total head of a liquid particles may
possess
(A) Potential head and Kinetic head
(B) Kinetic-head and Pressure head
(C) Potential head and Pressure head
(D) Potential head, Kinetic head and
Pressure head
41. Equation of continuity of flow is based
on the principle of conservation of
(A) mass
(B) momentum
(C) force
(D) acceleration
42. The instrument used for measuring the
velocity of flow is known as
(A) Venturimeter
(B) Orifice meter
(C) Pitot tube
(D) Differential manometer
43. For a most economical rectangular
channel, the hydraulic mean depth, is
equal to
(A) the depth of flow
(B) half the depth of flow
(C) one-third the depth of flow
(D) two-third the depth of flow
44. Soils that have been transported by
wind
(A) Lacustrine deposits
(B) Glacial deposits
(C) Aeolin deposits
(D) Alluvial deposits
Space For Rough Work
CE .9 A-1
9. 45. The ratio of total volume of voids to
total volume of soil is
(A) Porosity
(B) Void ratio
(C) Air content
(D) Degree of saturation
46. The correct order of capillary rise in
increasing order in different types of
soil is
(A) Fine sand, Clay, Silt, Colloids
(B) Silt, Fine sand, Clay, Colloids
(C) Fine Sand, Clay, Colloids, Silt
(D) Fine Sand, Silt, Clay, Colloids
47. Negative skin friction in a soil is
considered when the pile - is
constructed through a
48. The collapsible soil is associated with
(A) Dune sands
(B) Laterite soils
(C) Loess
(D) Black cotton soil
49. The two. criteria for the determination
of allowable bearing capacity of a
foundation are
(A) Tensile failure and compression
failure
(B) Tensile failure and settlement
(C) Bond failure and shear failure
(D) Shear failure and settlement
50. Soil are arranged in face to face
orientation. This type of soil structure
is
(A) Fill material (A) Dispersed
(B.) Dense coarse sand (B) Cohesive matrix
(C) Over consolidated stiff clay (C) Honey comb
(D) Dense tine sand (D) Flocculent
Space For Rough Work
A-1 10 CE
10. 0
K---3 m
Infernal hinge
H
PART — 2
(Each question carries two marks) (25 x 2 = 50)
51. For the beam shown in figure, the
value of support moment is
kN-M.
21ikN
(A) 5 kN-M
(B) 10 kN-M
(C) 40 kN-M
(D) Zero kN-M
52. Ultimate collapse load (P) interms of
plastic Moment (Mr) by kinematic
approach for a propped cantilever `13'
acting at mid span is
N
/12 >PC //2
(A) P = 2Mp//
(B) P = 4Mp//
(C) P -= oMpll
(D) P = 8Mp//
53. For the beam subjected to uniformly
distributed moment M kN-m per unit
length, bending moment at mid span is
M kN-ni per unit length
54. A rigid bar GM of length `/' is
supported by a hinge and a springyg of
stillness `I(' as shown in figure.
Buckling load per for the bar will be
(A) 0.5 k/
(B) 0.8 k/
(C) 0.9 k!
(D) 1.0 k/
Az
(A) Zero
(B) M
(C) MI
(D) M//
Space For Rough Work
CE 11 • A-1
11. (B)
(C)
(D)
55. A concrete beam of rectangular cross
section of 200 mm x 400 mm is
stressed by a force of 400 kN at
eccentricity 100 mm. The maximum
compressive stress in the concrete is
(A) 12.5 N/ mm'
(B) 7.5 N/ mm2
(C) 5.0 N/ mm2
(D) 2.5 N/ mm'
56. A ball of weight W is supported on
smooth planes as shown. The free
body diagram of the ball is
57. If a ladder is not in equilibrium against
a smooth vertical wall, then it can be
made in equilibrium by
(A) increasing angle of inclination
with horizontal.
(B) decreasing angle of inclination
with horizontal.
(C) increasing area of the ladder.
(D) decreasing area of the ladder.
58. A steel column, pinned at both ends,
has a buckling load of 200 kN. If the
column is restrained against lateral
movement at its mid height, its
buckling load is
(A) 200 kN
(B) 283 kN
(C) 400 kN
(D) 800 kN
Space For Rough Work
A-1 12 CE
12. 59. The stepped cantilever is subjected to
moments M as shown in figure.
The vertical deflection at the free end
is
M
Qm
82 >I< 1/2 --31
M/2
(A)
M
(B)
/2
(C) M/ 2
(D) Zero
60. The RL of bench mark is 100.00. The
back sight is 1.215 in and foresight is
1.870 in, the RL of the forward station
is
(A) 99.345 in
(B) 100.12 in
(C) 85.6 m
(D) 73.2 m
61. In a BG railway track a specified
ruling gradient is I in 250. The
horizontal curve of 3° on a gradient of
1 in 250 will have permissible gradient
of
(A) 1 in 357
(B) 1 in 251
(C) 1 in 163
(D) I in 158
62. The main plate of a transit is divided
into 1080 equal divisions, 60 divisions
of the Vernier coincide exactly with 59
divisions of the main plate. The transit
can read angles accurate upto
(A) 20"
(B) 30"
(C) 10"
(D) 40"
63. The radius of a horizontal curve is 100 in.
The design speed is 50 kmph and the
design co-efficient of lateral friction is
0.15. What would he the rate of super
elevation if full lateral friction is
considered ?
(A) 1/21.3
(B) 1/15
(C) 1/2
(D) 1/8.9
2 El I1I
8E1
4E1
2E1
Space For Rough Work
CE 13 A-I
13. 64. The chlorine usage in the treatment of
20,000 cum per day is 8 kg/day. The
residual after 10 min contact is 20
mg/L. The chlorine dosage in
milligrams per litre will be
(A) 0.4
(B) 0.5
(C) 0.6
(D) 0.8
65. The volume of sedimentation tank is
10 M x50 M x 1.5 M (deep). Flow
rate = 500 M/day. The retention time
would be
(A) 3.0 hours
(B) 2.4 hours
(C) 2.8 hours
(D) 1.8 hours
66. If self purification constant of a large
stream flowing with low velocity is
2.0 and its re-oxygenation co-efficient
is 0.2, then its de-oxygenation co-
efficient will be
(A) 0.22
(B) 0.1
(C) 0.18
(D) 0.4
67. Two million litres of water per clay is
passing through a sedimentation tank
which is 6 m wide, 15 m long and.
having water depth of 3.0 M.
Detention time for the tank will he
(A) 3.24 hours
(B) 1.68 hours
(C) 1.5 hours
(D) 2.26 hours
68. Two small orifices A and B of
diameters I cm and 2 cm respectively •
are placed on sides of a tank at depths
of h1 and h, below the open liquid
surface. If discharges through A and B
are equal, then ratio of h and II,
(assuming equal coefficient of
discharge) will be
(A) 16: 1
(B) 8 : 1
(C) 4 : 1
(D)2:1
69. A model of reservoir is emptied in 10
minutes, If model scale is 1:25, then
time taken by the prototype to empty
itself, would be
(A) 250 minutes
(B) 50 minutes
(C) 60 minutes
(D) 2 minutes
Space For Rough Work
A-1 14 CF
14. 70. If capillary rise of water in a 1 mm
diameter tube is 3 cm, the height of
capillary rise of water in a 0.2 mm
diameter tube in cm will he
(A) 1.5 cm
(B) 7.5 cm
(C) 15 cm
(D) 75 cm
71. -A trapezoidal channel with base width
6 m and side slopes 2H to I V convey
water as 16 m3 /s with depth of flow
of 1.5 in. Froude number will be
(A) 0.18
(B) 0.28
(C) 0.38
(D) 0.48
72. An undisturbed soil sample has a
plastic limit of 25%, a natural moisture
content of 40% and a liquidity index
of 50%. Its liquid unit is
(A) 50%
(B) 55%
(C) 65%
(D) 75%
73. If a rectangular beam Of c/s 300 mm x
400 mm - is subjected to a shear force
of 50 kN, then maximum shear stress
in the section is
(A) 0.625 N/
(B) 0.15 N/
(C) 0.53 11/ mm'
(D) 0.18 N/ mm'
74. If dry density of a sand with porosity
0.387 is 1600 kg/ ms , then the void
ratio is
(A) 0.52
(B) 0.59
(C) 0.631
(D) 0.789
75. A retaining wall retains a sand strata
with (1) = 30° upto its top. If a uniform
surcharge of 12000 N/ m2 is put on the
strata then the increase in the lateral
earth pressure intensity on wall will be
(A) 6000 N/ m2
(B) 3000 N/ m'
(C) 4000 N/1112
(D) 2000 N/ m'
Space For Rough Work
CE 15 A-1