Rekoser manufactures Submersible, Surface, Sewage and Swimming Pool Solar Water Pumps with controller, water level sensor and cable for solar panel.
http://rekoser.com/solar-water-pumps/
Fans for Compressor Cooling.
Gas compression for the generation of compressed air produces heat, which must be dissipated to protect the unit.
In sound-insulated screw compressors, energy-efficient radial fans from Rosenberg ensure the necessary cooling air. Normally, the waste heat is discharged into the open air via ducts.
Alternatively, it can be integrated into a recirculation or heat recovery system, especially in cold weather.
Rekoser manufactures Submersible, Surface, Sewage and Swimming Pool Solar Water Pumps with controller, water level sensor and cable for solar panel.
http://rekoser.com/solar-water-pumps/
Fans for Compressor Cooling.
Gas compression for the generation of compressed air produces heat, which must be dissipated to protect the unit.
In sound-insulated screw compressors, energy-efficient radial fans from Rosenberg ensure the necessary cooling air. Normally, the waste heat is discharged into the open air via ducts.
Alternatively, it can be integrated into a recirculation or heat recovery system, especially in cold weather.
OzLinc Industries Hose and Clamps Catalogueozlincau
OzLinc Industries supply a variety of hose, clamps, valves, pipe and fittings to the Australian mining, fire fighting, infrastructure and marine industries.
La organización de actos en el Consejo Superior de Deportes: Real Orden del M...Héctor Machota García
Esquema de la presentación del trabajo de fin de Máster. La organización de actos en el Consejo Superior de Deportes: Real Orden del Mérito Deportivo 2014
The heat generated in the winding of dry transformers needs to be dissipated via the surface of the coil. Our fans are ideally suited for this purpose. Rosenberg fans help remove the dissipated heat and, at the same time, use the ambient air to cool down the transformer.
An efficiently cooled transformer has the following advantages:
• Higher peak loads can be achieved
• Improved efficiency of the transformer
• Increased power of the transformer
• Longer life due to the more even distribution of temperature of the transformer winding
Rosenberg's Axial Fans: https://www.youtube.com/watch?v=iA7csh5SqnU
OzLinc Industries Hose and Clamps Catalogueozlincau
OzLinc Industries supply a variety of hose, clamps, valves, pipe and fittings to the Australian mining, fire fighting, infrastructure and marine industries.
La organización de actos en el Consejo Superior de Deportes: Real Orden del M...Héctor Machota García
Esquema de la presentación del trabajo de fin de Máster. La organización de actos en el Consejo Superior de Deportes: Real Orden del Mérito Deportivo 2014
The heat generated in the winding of dry transformers needs to be dissipated via the surface of the coil. Our fans are ideally suited for this purpose. Rosenberg fans help remove the dissipated heat and, at the same time, use the ambient air to cool down the transformer.
An efficiently cooled transformer has the following advantages:
• Higher peak loads can be achieved
• Improved efficiency of the transformer
• Increased power of the transformer
• Longer life due to the more even distribution of temperature of the transformer winding
Rosenberg's Axial Fans: https://www.youtube.com/watch?v=iA7csh5SqnU
The Grundfos DW pumps form part of a complete range of wastewater and sewage
handling products. Like all Grundfos products the DW pump series offer unique cus-
tomer benefits, making them the natural choice for any job where raw water needs to
be pumped - whether from construction sites, mining pits, excavations, or flooded base-
ments, etc.
OUTICOM - Shamal - Catalogue des compresseurs à vis - 75-250KWOUTICOM
Outicom propose une large gamme d'équipements et consommables destinée aux professionnels de l'industrie et de l'automobile du Maroc.
Notre partenariat de représentation exclusive avec SHAMAL, leader incontesté du domaine, permet de vous proposer des équipements de qualité, fiables et un large éventail de solutions concrètes à la plupart de vos besoins.
Découvrez notre gamme SHAMAL de compresseurs à vis BORA de 75 à 250KW.
Boge screw air compressors--oil free solutionsdaisy Airmax
Shanghai Airmax co.,ltd knows very well about Boge air compressors, we have complete boge compressor parts replacement(boge intake air filter, boge oil filter, boge air/oil separator).please contact info@aircompressor-filter.com
1. Low amp draw
Low ampere draw means a motor that is operating under less load and
less electrical stress.This will prolong the motor Life and ensure many
years of uninterrupted service
Superior air flow
CertifiedairflowresultstestedtoAMCAStandards230forfanthrust
Manufactured not assembled Blade and Motor Combination
Forward or reverse airflow options
High cubic feet per minute of air delivery minimizes the stress on
transformer coils and provides more cooling air during peak load times
Engineered for outdoor application
Unique, locking, labyrinth design between motor housing and impeller
guard against moisture entry in the harshest of outdoor applications of
high heat and humidity
IP55 rated and UL 507-39 wash down ready
UVStabilized
Superior class F insulation system for longer motor life
AmbientTemperature Range -32°F/-36°C and 104° F/40°C
Aluminum housing for excellent heat dissipation
Thermally Protected, single phase standard, three phase optional
Rated severe duty,TEAO
Sealed ball bearing in front and rear
PolyBladesrequirelesstorqueatstartupandreducedin-rushcurrentduration
Engineered for the world wide transformer industry
50 or 60Hz
Hot dipped Galvanized OSHA guards
Standard, Header, Yoke and NEMA frame mounting options
Conventional and quick connect cord sets
A
B D
C
18" Transformer Cooling Fans
A B C D
18" Fan 16" (406mm) 16" (406mm) 13.5" (343mm) 20.5" (521mm)
Note: All guards are 6-3/8" deep
Part Number
Impeller
Diameter
[in] HP Phases
Freq.
[Hz] CFM Voltage
Noise
Level
[dBA]@6ft RPM
Running
Current
[A]
Starting
Current
[A] PF
CFM per
watt
PCA18-1/120/60 18 1/6 1 60 3060 120 63 1140 2.30 5.8 0.89 12
PCB18-1/120/60 18 1/3 1 60 4260 120 69 1650 2.65 6.7 0.98 14
PCA18-1/240/60 18 1/3 1 60 3050 240 64 1140 1.10 2.9 0.89 13
PCB18-1/240/60 18 1/2 1 60 4200 240 69 1650 1.45 3.5 0.99 12
PCD18-1/230/50 18 1/3 1 50 2600 230 59 960 1.30 3.2 0.64 13
PCE18-1/230/50 18 1/2 1 50 3700 230 65 1410 1.05 3.7 0.91 16
PCA18-3/60* 18 1/6 3 60 3050 460 63 1140 0.60 1.6 0.45 14
PCB18-3/60* 18 1/2 3 60 4360 460 70 1710 1.00 3.2 0.44 12
PCD18-3/50* 18 1/6 3 50 2610 230 59 960 1.05 2.9 0.38 13
PCE18-3/50* 18 1/2 3 50 3740 230 65 1440 1.80 8.6 0.35 17
PCA18-3/60* 18 1/6 3 60 3050 230 63 1140 1.05 2.7 0.45 15
PCB18-3/60* 18 1/2 3 60 4360 230 70 1710 1.75 5.5 0.44 13
PCD18-3/50* 18 1/6 3 50 2610 400 59 960 0.60 1.7 0.38 16
PCE18-3/50* 18 1/2 3 50 3740 400 65 1440 1.05 3.3 0.35 15
The engineered solution to transformer cooling.
More Air • Better Cooling • Longer Life
call 1-855-PX3-FANS or email px3sales@pxecorp.comwww.px3fans.com
Backed by a 3 YearWarranty on motor impeller and parts and a 1 YearWarranty on manufacture of grill.
Shipping Weight: 32 lbs. Shipping Dimensions: 22" x 21" x14"
*ALL 3-PHASE 460V FANS CAN BE WIRED TO 230V AT THE FACTORY UPON REQUEST. **OPERATION VOLTAGE +/- 10% OF THE RATED VOLTAGE. REV 8/22/14
2. A
B D
C
24" Transformer Cooling Fans
A B C D
24" Fan 18.5" (470mm) 23" (584mm) 15" (381mm) 28.5" (719mm)
Note: All guards are 6-3/8" deep
Part Number
Impeller
Diameter
[in] HP Phases
Freq.
[Hz] CFM Voltage
Noise
Level
[dBA]@6ft RPM
Running
Current
[A]
Starting
Current
[A] PF
CFM per
watt
PCA24-1/120/60 24 1/6 1 60 6100 120 66 1110 2.70 5.8 0.91 21
PCB24-1/120/60 24 1/2 1 60 7650 120 75 1740 4.30 20.5 0.98 15
PCA24-1/240/60 24 1/3 1 60 6050 240 66 1110 1.35 2.9 0.91 21
PCB24-1/240/60 24 1/2 1 60 7300 240 75 1690 1.80 5.6 0.99 17
PCD24-1/240/50 24 1/2 1 50 5200 230 61 940 1.40 3.2 0.71 23
PCE24-1/240/50 24 1/2 1 50 6200 230 71 1420 1.50 6.2 0.83 21
PCA24-3/60* 24 1/6 3 60 6050 460 66 1120 0.65 1.6 0.53 22
PCB24-3/60* 24 1/2 3 60 7500 460 75 1720 1.05 4.5 0.50 19
PCC24-3/60* 24 1/2 3 60 7600 460 73 1110 1.25 3.4 0.60 13
PCD24-3/50* 24 1/6 3 50 6000 400 62 950 0.60 1.7 0.44 31
PCE24-3/50* 24 1/2 3 50 6300 400 70 1450 1.05 4.7 0.38 23
PCF24-3/50* 24 1/2 3 50 6550 400 68 940 1.15 3.7 0.49 17
PCA24-3/60* 24 1/6 3 60 6050 230 66 1120 1.10 2.7 0.53 22
PCB24-3/60* 24 1/2 3 60 7500 230 75 1720 1.80 7.7 0.50 19
PCC24-3/60* 24 1/2 3 60 7600 230 73 1110 2.15 5.8 0.60 14
PCD24-3/50* 24 1/6 3 50 6000 230 62 950 1.05 2.9 0.44 31
PCE24-3/50* 24 1/2 3 50 6300 230 70 1450 1.80 8.1 0.38 23
PCF24-3/50* 24 1/2 3 50 6550 230 68 940 2.00 6.4 0.49 17
call 1-855-PX3-FANS or email px3sales@pxecorp.com
The engineered solution to transformer cooling.
More Air • Better Cooling • Longer Life
www.px3fans.com
Low amp draw
Low ampere draw means a motor that is operating under less load and
less electrical stress.This will prolong the motor Life and ensure many
years of uninterrupted service
Superior air flow
CertifiedairflowresultstestedtoAMCAStandards230forfanthrust
Manufactured not assembled Blade and Motor Combination
Forward or reverse airflow options
High cubic feet per minute of air delivery minimizes the stress on
transformer coils and provides more cooling air during peak load times
Engineered for outdoor application
Unique, locking, labyrinth design between motor housing and impeller
guard against moisture entry in the harshest of outdoor applications of
high heat and humidity
IP55 rated and UL 507-39 wash down ready
UVStabilized
Superior class F insulation system for longer motor life
AmbientTemperature Range -32°F/-36°C and 104° F/40°C
Aluminum housing for excellent heat dissipation
Thermally Protected, single phase standard, three phase optional
Rated severe duty,TEAO
Sealed ball bearing in front and rear
PolyBladesrequirelesstorqueatstartupandreducedin-rushcurrentduration
Engineered for the world wide transformer industry
50 or 60Hz
Hot dipped Galvanized OSHA guards
Standard, Header, Yoke and NEMA frame mounting options
Conventional and quick connect cord sets
Backed by a 3 YearWarranty on motor impeller and parts and a 1 YearWarranty on manufacture of grill.
Shipping Weight: 45 lbs. Shipping Dimensions: 17" x 29" x29"
*ALL 3-PHASE 460V FANS CAN BE WIRED TO 230V AT THE FACTORY UPON REQUEST. **OPERATION VOLTAGE +/- 10% OF THE RATED VOLTAGE. REV 8/22/14
3. 26" Transformer Cooling Fans
Low Noise
A B C D
26" Fan 23” (584mm) 23" (584mm) 17.15” (435.7mm) 31” (787mm)
Note: 16”, 18”, 24”, 27” guards are 6-3/8" deep, 26” Low Noise guard is 8-1/2” deep
call 1-855-PX3-FANS or email px3sales@pxecorp.com
The engineered solution to transformer cooling.
More Air • Better Cooling • Longer Life
www.px3fans.com
Low amp draw
Low ampere draw means a motor that is operating under less load and
less electrical stress.This will prolong the motor Life and ensure many
years of uninterrupted service
Superior air flow
CertifiedairflowresultstestedtoAMCAStandards230forfanthrust
Manufactured not assembled Blade and Motor Combination
Forward or reverse airflow options
High cubic feet per minute of air delivery minimizes the stress on
transformer coils and provides more cooling air during peak load times
Engineered for outdoor application
Unique, locking, labyrinth design between motor housing and impeller
guard against moisture entry in the harshest of outdoor applications of
high heat and humidity
IP55 rated and UL 507-39 wash down ready
UVStabilized
Superior class F insulation system for longer motor life
AmbientTemperature Range -32°F/-36°C and 104° F/40°C
Aluminum housing for excellent heat dissipation
Thermally Protected, single phase standard, three phase optional
Rated severe duty,TEAO
Sealed ball bearing in front and rear
PolyBladesrequirelesstorqueatstartupandreducedin-rushcurrentduration
Engineered for the world wide transformer industry
50 or 60Hz
Hot dipped Galvanized OSHA guards
Standard, Header, Yoke and NEMA frame mounting options
Conventional and quick connect cord sets
Backed by a 3 YearWarranty on motor impeller and parts and a 1 YearWarranty on manufacture of grill.
Shipping Weight: 45 lbs. Shipping Dimensions: 17" x 29" x29"
C
DB
A
Part Number
Impeller
Diameter
[in] HP Phases
Freq.
[Hz] CFM Voltage
Noise
Level
[dBA]@6ft RPM
Running
Current
[A]
Starting
Current
[A] PF
CFM per
watt
PCK26-1/240/60 26 1/6 1 60 5300 240 51 555 1.05 1.5 0.90 24
PCL26-1/230/50 26 1/8 1 50 4600 230 46 470 1.00 1.6 0.73 27
PCG26-3/60* 26 1/5 3 60 5250 460 53 560 0.65 1.2 0.44 24
PCI26-3/60* 26 1/2 3 60 7550 460 63 860 0.95 2.9 0.60 17
PCH26-3/50* 26 1/6 3 50 4350 400 48 480 0.65 1.2 0.38 26
PCJ26-3/50* 26 1/3 3 50 6300 400 58 720 0.85 2.7 0.49 22
PCG26-3/60* 26 1/5 3 60 5150 230 51 550 1.00 1.8 0.50 25
PCI26-3/60* 26 1/2 3 60 7350 230 63 840 1.65 4.2 0.67 17
PCH26-3/50* 26 1/6 3 50 4350 230 48 480 1.10 2.1 0.38 26
PCJ26-3/50* 26 1/3 3 50 6300 230 58 720 1.52 4.8 0.49 22
*ALL 3-PHASE 460V FANS CAN BE WIRED TO 230V AT THE FACTORY UPON REQUEST. **OPERATION VOLTAGE +/- 10% OF THE RATED VOLTAGE. REV 8/22/14
4. A
B D
C
Part Number
Impeller
Diameter
[in] HP Phases
Freq.
[Hz] CFM Voltage
Noise
Level
[dBA]@6ft RPM
Running
Current
[A]
Starting
Current
[A] PF
CFM per
watt
PCA27-1/120/60 27 1/6 1 60 7400 120 69 1120 2.75 5.8 0.91 25
PCC27-1/120/60 27 1/2 1 60 10100 120 77 1700 5.9 20.5 0.97 14
PCA27-1/240/60 27 1/3 1 60 7350 240 69 1110 1.30 2.9 0.91 26
PCC27-1/240/60 27 1/2 1 60 9450 240 76 1620 2.45 5.6 0.99 17
PCD27-1/240/50 27 1/3 1 50 6300 230 64 950 1.40 3.2 0.70 29
PCF27-1/240/50 27 1/2 1 50 8000 230 72 1400 1.85 6.2 0.89 21
PCA27-3/60* 27 1/6 3 60 7300 460 67 1120 0.65 1.6 0.53 27
PCB27-3/60* 27 1/2 3 60 8300 460 71 1120 1.20 3.4 0.54 16
PCC27-3/60* 27 1/2 3 60 9600 460 76 1690 1.20 4.5 0.63 17
PCD27-3/50* 27 1/6 3 50 6250 400 64 950 0.62 1.7 0.44 34
PCE27-3/50* 27 1/2 3 50 7000 400 66 950 1.15 3.7 0.43 20
PCF27-3/50* 27 1/2 3 50 8100 400 72 1420 1.10 4.7 0.49 22
PCA27-3/60* 27 1/6 3 60 7300 230 67 1120 1.15 2.7 0.53 28
PCB27-3/60* 27 1/2 3 60 8300 230 71 1120 2.05 5.8 0.54 18
PCC27-3/60* 27 1/2 3 60 9600 230 76 1690 2.05 7.7 0.63 17
PCD27-3/50* 27 1/6 3 50 6250 230 64 950 1.10 2.9 0.44 34
PCE27-3/50* 27 1/2 3 50 7000 230 66 950 2.00 6.4 0.43 20
PCF27-3/50* 27 1/2 3 50 8100 230 72 1420 1.90 8.1 0.49 22
27" Transformer Cooling Fans
A B C D
27" Fan 23" (584mm) 23" (584mm) 15" (381mm) 31" (787mm)
Note: All guards are 6-3/8" deep
call 1-855-PX3-FANS or email px3sales@pxecorp.com
The engineered solution to transformer cooling.
More Air • Better Cooling • Longer Life
www.px3fans.com
Low amp draw
Low ampere draw means a motor that is operating under less load and
less electrical stress.This will prolong the motor Life and ensure many
years of uninterrupted service
Superior air flow
CertifiedairflowresultstestedtoAMCAStandards230forfanthrust
Manufactured not assembled Blade and Motor Combination
Forward or reverse airflow options
High cubic feet per minute of air delivery minimizes the stress on
transformer coils and provides more cooling air during peak load times
Engineered for outdoor application
Unique, locking, labyrinth design between motor housing and impeller
guard against moisture entry in the harshest of outdoor applications of
high heat and humidity
IP55 rated and UL 507-39 wash down ready
UVStabilized
Superior class F insulation system for longer motor life
AmbientTemperature Range -32°F/-36°C and 104° F/40°C
Aluminum housing for excellent heat dissipation
Thermally Protected, single phase standard, three phase optional
Rated severe duty,TEAO
Sealed ball bearing in front and rear
PolyBladesrequirelesstorqueatstartupandreducedin-rushcurrentduration
Engineered for the world wide transformer industry
50 or 60Hz
Hot dipped Galvanized OSHA guards
Standard, Header, Yoke and NEMA frame mounting options
Conventional and quick connect cord sets
Backed by a 3 YearWarranty on motor impeller and parts and a 1 YearWarranty on manufacture of grill.
Shipping Weight: 49 lbs. Shipping Dimensions: 17" x 32" x32"
*ALL 3-PHASE 460V FANS CAN BE WIRED TO 230V AT THE FACTORY UPON REQUEST. **OPERATION VOLTAGE +/- 10% OF THE RATED VOLTAGE. REV 8/22/14
5. Transformer Cooling Fans
call 1-855-PX3-FANS or email px3sales@pxecorp.com
More Air • Better Cooling • Longer Life
www.px3fans.com
Engineered for outdoor use
Unique, locking, labyrinth design between motor housing
and impeller guard against moisture entry in the harshest
of outdoor applications of high heat and humidity
IP55 rated and UL 507-39 wash down ready
UVStabilized
g Heavy Duty Class European Manufactured Capacitor
h Stainless Steel Bolts
j Finned Construction Housing for Superior Heat Disappation
k OSHA approved Hot Dipped Galvanized Guards
l Motorshaft completely protected from weather and elements
z Light-weight, UVStabilized polymer blades
g
h
j
k
z
l
![Low amp draw
Low ampere draw means a motor that is operating under less load and
less electrical stress.This will prolong the motor Life and ensure many
years of uninterrupted service
Superior air flow
CertifiedairflowresultstestedtoAMCAStandards230forfanthrust
Manufactured not assembled Blade and Motor Combination
Forward or reverse airflow options
High cubic feet per minute of air delivery minimizes the stress on
transformer coils and provides more cooling air during peak load times
Engineered for outdoor application
Unique, locking, labyrinth design between motor housing and impeller
guard against moisture entry in the harshest of outdoor applications of
high heat and humidity
IP55 rated and UL 507-39 wash down ready
UVStabilized
Superior class F insulation system for longer motor life
AmbientTemperature Range -32°F/-36°C and 104° F/40°C
Aluminum housing for excellent heat dissipation
Thermally Protected, single phase standard, three phase optional
Rated severe duty,TEAO
Sealed ball bearing in front and rear
PolyBladesrequirelesstorqueatstartupandreducedin-rushcurrentduration
Engineered for the world wide transformer industry
50 or 60Hz
Hot dipped Galvanized OSHA guards
Standard, Header, Yoke and NEMA frame mounting options
Conventional and quick connect cord sets
A
B D
C
18" Transformer Cooling Fans
A B C D
18" Fan 16" (406mm) 16" (406mm) 13.5" (343mm) 20.5" (521mm)
Note: All guards are 6-3/8" deep
Part Number
Impeller
Diameter
[in] HP Phases
Freq.
[Hz] CFM Voltage
Noise
Level
[dBA]@6ft RPM
Running
Current
[A]
Starting
Current
[A] PF
CFM per
watt
PCA18-1/120/60 18 1/6 1 60 3060 120 63 1140 2.30 5.8 0.89 12
PCB18-1/120/60 18 1/3 1 60 4260 120 69 1650 2.65 6.7 0.98 14
PCA18-1/240/60 18 1/3 1 60 3050 240 64 1140 1.10 2.9 0.89 13
PCB18-1/240/60 18 1/2 1 60 4200 240 69 1650 1.45 3.5 0.99 12
PCD18-1/230/50 18 1/3 1 50 2600 230 59 960 1.30 3.2 0.64 13
PCE18-1/230/50 18 1/2 1 50 3700 230 65 1410 1.05 3.7 0.91 16
PCA18-3/60* 18 1/6 3 60 3050 460 63 1140 0.60 1.6 0.45 14
PCB18-3/60* 18 1/2 3 60 4360 460 70 1710 1.00 3.2 0.44 12
PCD18-3/50* 18 1/6 3 50 2610 230 59 960 1.05 2.9 0.38 13
PCE18-3/50* 18 1/2 3 50 3740 230 65 1440 1.80 8.6 0.35 17
PCA18-3/60* 18 1/6 3 60 3050 230 63 1140 1.05 2.7 0.45 15
PCB18-3/60* 18 1/2 3 60 4360 230 70 1710 1.75 5.5 0.44 13
PCD18-3/50* 18 1/6 3 50 2610 400 59 960 0.60 1.7 0.38 16
PCE18-3/50* 18 1/2 3 50 3740 400 65 1440 1.05 3.3 0.35 15
The engineered solution to transformer cooling.
More Air • Better Cooling • Longer Life
call 1-855-PX3-FANS or email px3sales@pxecorp.comwww.px3fans.com
Backed by a 3 YearWarranty on motor impeller and parts and a 1 YearWarranty on manufacture of grill.
Shipping Weight: 32 lbs. Shipping Dimensions: 22" x 21" x14"
*ALL 3-PHASE 460V FANS CAN BE WIRED TO 230V AT THE FACTORY UPON REQUEST. **OPERATION VOLTAGE +/- 10% OF THE RATED VOLTAGE. REV 8/22/14](https://image.slidesharecdn.com/d6836037-0d51-486b-ace7-a53928a40343-150716172939-lva1-app6891/85/PDXE_PX3_SS6-8-22-14-1-320.jpg)
![A
B D
C
24" Transformer Cooling Fans
A B C D
24" Fan 18.5" (470mm) 23" (584mm) 15" (381mm) 28.5" (719mm)
Note: All guards are 6-3/8" deep
Part Number
Impeller
Diameter
[in] HP Phases
Freq.
[Hz] CFM Voltage
Noise
Level
[dBA]@6ft RPM
Running
Current
[A]
Starting
Current
[A] PF
CFM per
watt
PCA24-1/120/60 24 1/6 1 60 6100 120 66 1110 2.70 5.8 0.91 21
PCB24-1/120/60 24 1/2 1 60 7650 120 75 1740 4.30 20.5 0.98 15
PCA24-1/240/60 24 1/3 1 60 6050 240 66 1110 1.35 2.9 0.91 21
PCB24-1/240/60 24 1/2 1 60 7300 240 75 1690 1.80 5.6 0.99 17
PCD24-1/240/50 24 1/2 1 50 5200 230 61 940 1.40 3.2 0.71 23
PCE24-1/240/50 24 1/2 1 50 6200 230 71 1420 1.50 6.2 0.83 21
PCA24-3/60* 24 1/6 3 60 6050 460 66 1120 0.65 1.6 0.53 22
PCB24-3/60* 24 1/2 3 60 7500 460 75 1720 1.05 4.5 0.50 19
PCC24-3/60* 24 1/2 3 60 7600 460 73 1110 1.25 3.4 0.60 13
PCD24-3/50* 24 1/6 3 50 6000 400 62 950 0.60 1.7 0.44 31
PCE24-3/50* 24 1/2 3 50 6300 400 70 1450 1.05 4.7 0.38 23
PCF24-3/50* 24 1/2 3 50 6550 400 68 940 1.15 3.7 0.49 17
PCA24-3/60* 24 1/6 3 60 6050 230 66 1120 1.10 2.7 0.53 22
PCB24-3/60* 24 1/2 3 60 7500 230 75 1720 1.80 7.7 0.50 19
PCC24-3/60* 24 1/2 3 60 7600 230 73 1110 2.15 5.8 0.60 14
PCD24-3/50* 24 1/6 3 50 6000 230 62 950 1.05 2.9 0.44 31
PCE24-3/50* 24 1/2 3 50 6300 230 70 1450 1.80 8.1 0.38 23
PCF24-3/50* 24 1/2 3 50 6550 230 68 940 2.00 6.4 0.49 17
call 1-855-PX3-FANS or email px3sales@pxecorp.com
The engineered solution to transformer cooling.
More Air • Better Cooling • Longer Life
www.px3fans.com
Low amp draw
Low ampere draw means a motor that is operating under less load and
less electrical stress.This will prolong the motor Life and ensure many
years of uninterrupted service
Superior air flow
CertifiedairflowresultstestedtoAMCAStandards230forfanthrust
Manufactured not assembled Blade and Motor Combination
Forward or reverse airflow options
High cubic feet per minute of air delivery minimizes the stress on
transformer coils and provides more cooling air during peak load times
Engineered for outdoor application
Unique, locking, labyrinth design between motor housing and impeller
guard against moisture entry in the harshest of outdoor applications of
high heat and humidity
IP55 rated and UL 507-39 wash down ready
UVStabilized
Superior class F insulation system for longer motor life
AmbientTemperature Range -32°F/-36°C and 104° F/40°C
Aluminum housing for excellent heat dissipation
Thermally Protected, single phase standard, three phase optional
Rated severe duty,TEAO
Sealed ball bearing in front and rear
PolyBladesrequirelesstorqueatstartupandreducedin-rushcurrentduration
Engineered for the world wide transformer industry
50 or 60Hz
Hot dipped Galvanized OSHA guards
Standard, Header, Yoke and NEMA frame mounting options
Conventional and quick connect cord sets
Backed by a 3 YearWarranty on motor impeller and parts and a 1 YearWarranty on manufacture of grill.
Shipping Weight: 45 lbs. Shipping Dimensions: 17" x 29" x29"
*ALL 3-PHASE 460V FANS CAN BE WIRED TO 230V AT THE FACTORY UPON REQUEST. **OPERATION VOLTAGE +/- 10% OF THE RATED VOLTAGE. REV 8/22/14](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)