This document is a catalog for the Paladin "EVOLUTION" Equipment Rail and Accessories. It includes an overview of the rail system, mounting solutions for diagnostic equipment, and rail mounting kits for items like soap/sanitizer dispensers, paper towel dispensers, sharps containers, and more. Detailed product descriptions, specifications, and part numbers are provided for the rail and wide range of accessories.

1. 940 W. Oakland Ave, Suite A1, Oakland, FL 34787
(407) 614-8781 office, (407) 614-8782 fax
info@PaladinMP.com, www.PaladinMP.com
EQUIPMENT RAIL
AND
ACCESSORIES
CATALOG
“EVOLUTION”
EQUIPMENT MANAGEMENT
RAIL SYSTEM

2. info@PaladinMP.com
(407) 614-8781 office
INDEX PAGE
Description
Rail Overview, Specification, and Installation Instructions
DEM: Diagnostic Equipment Management
Infection Control Devices
Soap / Sanitizer / Wipes Mount
Paper Towels
Gloves
PPE
Sharps Containers
Baskets and Bins
Clips and Hooks
Shelves
Other Helpful Accessories
Installation photos
Management Application Brochure Overview Sheets
Key: Legend of symbols for elevation drawings
Page (s)
3-5
6-11
12-53
14-19
20-26
27-40
41-47
48-52
53-61
62-71
72-75
76-93
94-102
103-109
110-112

3. info@PaladinMP.com
(407) 614-8781 office
“EVOLUTION”
The Fairfield-Style
Medical Equipment Rail

4. info@PaladinMP.com
(407) 614-8781 office
 “EVOLUTION” Equipment Management Rail: a seamless, extruded aluminum profile with clear anodized
finish containing a groove for attaching an adapter that supports the Owner supplied specified hospital
accessories and equipment and includes termination caps at each end. The groove and adapters are
designed so that the adaptor requires a seven degree tilt for attachment. The rail is designed to
accommodate a seamless Wilsonart laminate decorative color inlay the length of the rail up to ten feet
in length.
 “EVOLUTION” Equipment Management Rail shall be specified in one to ten foot lengths as shown on
drawings or indicated on purchase order to accommodate room conditions. For lengths greater than ten
feet, a JOINER piece is used to attach together multiple pieces of rail to meet the required total length.
 “EVOLUTION” Equipment Management Rail is pre-drilled on sixteen-inch centers (minimum) with the
exception of a one-foot rail length which has two mounting holes drilled at eight inches on center. The
Rail may also be field drilled by the installer to accommodate specific job site conditions.
 End caps shall be constructed of injected molded thermoplastic and shall resist most hospital cleaning
and disinfecting chemicals. The color shall be white and molded throughout the material. End caps shall
be friction-fit without use of fastening devices.
 Decorative inlay shall be supplied by Paladin for installation by the owner or contractor. Inlay is Wilsonart
laminate in the standard finish which will resist most hospital cleaning and disinfecting chemicals. Color
shall specified by the Owner. Specialty coating finishes can be made available for additional cost and
lead time. Alternate laminate manufacturers may be specified for additional cost and lead time. Contact
manufacturer for details.
 Option to powder coat rail with anti-microbial finish (AMF) in select colors. Contact manufacturer for
details.
PART NUMBER: R-XXX
“EVOLUTION” Fairfield-Style Equipment Management Rail
DESCRIPTION:

5. info@PaladinMP.com
(407) 614-8781 office
PALADIN “EVOLUTION”
RAIL INSTALLATION OVERVIEW
Rail may be mounted to any surface or backing/wall type.
Installer MUST use a MINUMUM of ¼” mounting hardware.
Contact manufacturer with any installation questions at number shown below.
Refer to the relevant elevation drawings and other specification
documentation for quantity and location details for each project.
Stud Mount
Drywall Mount
1. Position and level the “Evolution” rail on the wall at
the correct height and location as shown on the
elevation drawings. Mark location on wall.
2. Align holes in rail with studs. If required, drill new
holes into rail to align with stud locations.
3. Using a 1/4” x 2.5” sheet metal screw, securely
fasten the screws through the rail and drywall and
into the studs. Ensure a tight fit between rail and
wall.
1. Position and level the “Evolution” rail on the wall at
the correct height and location as shown on the
elevation drawings. Mark location on wall.
2. Mark through each of the pre-drilled holes in the
rail onto the drywall.
3. Remove the rail and securely install 1/4” toggle-
type wall anchors in locations as marked.
4. Realign the rail holes with the installed wall anchors
and tightly secure the rail to the wall with the 1/4”
x 2.5”wall anchor machine screws. Ensure a tight fit
between rail and wall.
Wall Anchor types A + B

6. info@PaladinMP.com
(407) 614-8781 office
Diagnostic Equipment
Management
(DEM prefix part numbers)
RAIL MOUNTING SOLUTIONS

7.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: DEM-106
Does not include Welch Allyn equipment
Suggested for use in conjunction with SM-101 BP cuff basket
 Alternate mounting kits available for other manufacturer’s devices. Contact your
sales representative.
Mounting kit for Welch Allyn aneroid BP
sphygmomanometer (Tycos 509)

8.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: SM-101
To accommodate cuffs up to thigh-sized
Plastic coated wire U-shaped basket
7”H x 6.75”W x 4”D
Includes pre-installed rail mounting kit items described below
BP cuff basket with mounting kit

9.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: DEM-108
Mounting kit for Welch Allyn
Ophthalmoscope (models 767/777)
 Mounting kits also available for original model 747. Contact your sales
representative.
Does not include Welch Allyn equipment

10.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: DEM-109
Mounting kit for Welch Allyn Specula
holders
Does not includes dispenser
Fits new and old styles

11.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: DEM-110
Mounting kit for Welch Allyn “Sure Temp”
thermometer (model 692)
Does not include Welch Allyn equipment

12.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: DEM-100-4
Does not include Welch Allyn equipment
Suggested for use in conjunction with SM-101 BP cuff basket
 Alternate mounting kits available for other manufacturer’s devices. Contact your
sales representative.
Complete set of rail, adapters and basket
for components of the Welch Allyn 777
Diagnostic instruments

13. info@PaladinMP.com
(407) 614-8781 office
Infection Control Devices
(IC prefix part numbers)
RAIL MOUNTING SOLUTIONS FOR THE FOLLOWING:
Soap / Sanitizer
Paper Towels
Gloves / PPE
Sharps Containers
Wipes Mount

14. PROBLEM: Per the CDC, many studies
have shown that the bacteria that cause
hospital-acquired infections are most
frequently spread from one patient to
another on the hands of healthcare
workers.
In 34 studies of hand washing, workers
washed their hands only 40% of the
time.
SOLUTION: Create a standard
directional flow with easy access to
sink and hand washing accessories at
the room entry. “…placing the hand
washing accessories on an equipment
rail allows adjustment in the system
without creating damage to the wall
and potential home for pathogens.”
EVIDENCE
BASED DESIGN
VALIDATION
Published by The
Center for Health
Design 2011

15. info@PaladinMP.com
(407) 614-8781 office
Soap/Sanitizer/Wipes Dispensers
RAIL MOUNTING SOULTIONS
We have rail mounting kits for every brand and model number.

16.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: IC-110
Does not includes dispenser
Universal rail mount kit for most wide body
soap/sanitizer dispensers
Available with dispenser for turn-key installation. Contact your sales rep for details.

17.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: IC-111
Universal rail mount kit for most narrow
body soap/sanitizer dispensers
Does not includes dispenser
Available with dispenser for turn-key installation. Contact your sales rep for details.

18.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: IC-114
Universal rail mount kit for Aerosol Foam
Dispensers with Drip Pan Extension
17 oz. (Steris/ Ecolab)
Does not includes dispenser or drip pan
Available with dispenser for turn-key installation. Contact your sales rep for details.

19.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: IC-117
Universal rail mount kit for Aerosol Foam
Dispensers with Drip Pan Extension
9 oz. (Steris/ Ecolab)
Does not includes dispenser or drip pan
Available with dispenser for turn-key installation. Contact your sales rep for details.

20.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: IC-112
Universal holder and rail mount kit for most
brands of sanitizing wipes
Includes holder and pre-installed adapter
Holder is standard powder coat painted finish without anti-
microbial compound
Also works to hold industrial style spray bottles

21. info@PaladinMP.com
(407) 614-8781 office
Paper Towel Dispensers
RAIL MOUNTING SOLUTIONS
If it’s not one of these, just ask. We probably have that too.

22.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: IC-401
 Mounts using (2) adapters. No adapter plate required.
 May be mounted in multiple locations to meet various field conditions.
Does not include dispenser
Mounting kit for most tri-fold paper towel
holders
Available with dispenser for turn-key installation. Contact your sales rep for details.

23.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: IC-404
Does not include dispenser
Mounting kit for Kimberly Clark Professional
(model 09990)

24.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: IC-409
Does not include dispenser
Mounting kit for Kimberly Clark Professional
(model 09335)

25.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: IC-405
Does not include dispenser
Mounting kit for GA Pacific EnMotion paper
towel dispensers (models 58487 and 58470)

26.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: IC-408
Does not include dispenser
Mounting kit for GA Pacific SofPull paper
towel dispensers (models 52109, 58201, and
58217)

27.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: IC-411
Does not include dispenser
Mounting kit for GA Pacific SofPull paper
towel dispensers (models 58487 and 58470)

28. info@PaladinMP.com
(407) 614-8781 office
Gloves Box Dispensers
INCLUDES ACCESSORY WITH ATTACHED RAIL MOUNT
Every type, size, and feed style. 1, 2, 3, or 4. Plastics, Metal, or Wire.
Just ask. We have it.
(STAND-ALONE MOUNTING KITS FOR OWNER SUPPLIED DISPENSERS ARE AVAILABLE UPON REQUEST.)

29.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: IC-226HV
 Available as single, double, triple, or quadruple configuration. Ask your sales person
for correct model numbers.
Includes dispenser and pre-installed mounting kit
10.125”H x 17”W x 4.25”D (box only)
Horizontal top feed or vertical side feed application
Made to easily change orientation on-site
Triple gloves box, ABS plastic with internal
dividers
Customer to define mounting preference (horizontal or vertical) at time of order.

30.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: IC-262HV
Triple gloves box, matte polycarbonate
plastic with internal dividers
Includes dispenser and pre-installed mounting kit
10.125”H x 17”W x 4.25”D (box only)
Horizontal top feed or vertical side feed application
Made to easily change orientation on-site
Customer to define mounting preference (horizontal or vertical) at time of order.
 Available as single, double, triple, or quadruple configuration. Ask your sales person
for correct model numbers.

31.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: IC-264HV
Includes dispenser and pre-installed mounting kit
10.125”H x 5.75”W x 4.25”D (box only)
Vertical top feed or horizontal side feed application
Made to easily change orientation on-site
Customer to define mounting preference (horizontal or vertical) at time of order.
Single gloves box, matte polycarbonate
plastic
 Available as single, double, triple, or quadruple configuration. Ask your sales person
for correct model numbers.

32.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: IC-261HV
Quadruple gloves box, crystal clear PETG
plastic with internal dividers
Includes dispenser and pre-installed mounting kit
10.125”H x 22.625”W x 4”D (box only)
Horizontal top feed or vertical side feed application
Made to easily change orientation on-site
Customer to define mounting preference (horizontal or vertical) at time of order.
 Available as single, double, triple, or quadruple configuration. Ask your sales person
for correct model numbers.

33.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: IC-263HV
Double gloves box, crystal clear PETG plastic
with internal dividers
Includes dispenser and pre-installed mounting kit
10.125”H x 11.375”W x 4”D (box only)
Horizontal top feed or vertical side feed application
Made to easily change orientation on-site
Customer to define mounting preference (horizontal or vertical) at time of order.
 Available as single, double, triple, or quadruple configuration. Ask your sales person
for correct model numbers.

34.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: IC-235HV
Triple gloves box, wood grain finish ABS
plastic with internal dividers
Actual color similar to Wilsonart: 10745-60 Foothill Pear
 Available as single, double, triple, or quadruple configuration. Ask your sales person
for correct model numbers.
Includes dispenser and pre-installed mounting kit
10.125”H x 17”W x 4”D (box only)
Horizontal top feed or vertical side feed application
Made to easily change orientation on-site
Customer to define mounting preference (horizontal or vertical) at time of order.

35.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: IC-236HV
Triple gloves box, wood grain finish ABS
plastic with internal dividers
Actual color similar to Wilsonart: 7922-07 Brighton Walnut
 Available as single, double, triple, or quadruple configuration. Ask your sales person
for correct model numbers.
Includes dispenser and pre-installed mounting kit
10.125”H x 17”W x 4”D (box only)
Horizontal top feed or vertical side feed application
Made to easily change orientation on-site
Customer to define mounting preference (horizontal or vertical) at time of order.

36.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: IC-201HV
Single gloves box, non-anti-microbial
powder-coated metal
Includes dispenser and pre-installed mounting kit
10”H x 5.625”W x 3.875”D (box only)
Vertical top feed or horizontal side feed application
Made to easily change orientation on-site
 Available as single, double, triple, or quadruple configuration. Ask your sales person
for correct model numbers.
Customer to define mounting preference (horizontal or vertical) at time of order.

37.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: IC-202HV
Double gloves box, non-anti-microbial
powder-coated metal
Includes dispenser and pre-installed mounting kit
10”H x 10.625”W x 3.875”D (box only)
Horizontal top feed or vertical side feed application
Made to easily change orientation on-site
Customer to define mounting preference (horizontal or vertical) at time of order.
 Available as single, double, triple, or quadruple configuration. Ask your sales person
for correct model numbers.
 No internal dividers with this model. For internal dividers, consult your sales person.

38.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: IC-204HV
Triple gloves box, non-anti-microbial
powder-coated metal
Includes dispenser and pre-installed mounting kit
10”H x 16”W x 3.875”D (box only)
Horizontal top feed or vertical side feed application
Made to easily change orientation on-site
Customer to define mounting preference (horizontal or vertical) at time of order.
 Available as single, double, triple, or quadruple configuration. Ask your sales person
for correct model numbers.
 No internal dividers with this model. For internal dividers, consult your sales person.

39.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: IC-203HV
Triple gloves box, non-anti-microbial
powder-coated metal
Includes dispenser and pre-installed mounting kit
15.25”H x 7.75 - 11.25”W x 3.75”D (holder only)
Front feed application with adjustable width capability
Made to easily change orientation on-site
Customer to define mounting preference (horizontal or vertical) at time of order.
 Available as single, double, triple, or quadruple configuration. Ask your sales person
for correct model numbers.

40.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: IC-210HV
Double gloves box, plastic coated wire
Includes dispenser and pre-installed mounting kit
8.25”H x 11”W x 3.75”D (holder only)
Horizontal top feed or vertical side feed application
Made to easily change orientation on-site
Customer to define mounting preference (horizontal or vertical) at time of order.

41.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: IC-205HV
Quadruple gloves box, plastic coated wire
Includes dispenser and pre-installed mounting kit
21.75”H x 8.25”W x 3.75”D (holder only)
Horizontal top feed or vertical side feed application
Made to easily change orientation on-site
Customer to define mounting preference (horizontal or vertical) at time of order.
 Available as single, double, triple, or quadruple configuration. Ask your sales person
for correct model numbers.

42. info@PaladinMP.com
(407) 614-8781 office
PPE Dispensers
INCLUDES ACCESSORY WITH ATTACHED RAIL MOUNT
If we don’t have an adapter kit already, we can make it for you.

43.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: IC-274
PPE dispensing cabinet, ABS and PETG plastic
Includes dispenser and pre-installed mounting kit with stand-off
Holds three boxes of gloves, two boxes of face masks, multi-fold
towels, and patient bibs
Tabs on both sides of unit to hang patient bib clips
23.5”H x 17.625”W x 5”D (cabinet only)

44.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: IC-271
PPE dispensing cabinet, ABS plastic
Includes dispenser and pre-installed mounting kit
Holds two boxes of gloves, one box of face masks, and one hand
sanitizer bottle
11.625”H x 18.5”W x 4.5”D (cabinet only)

45.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: IC-275HV
PPE dispenser, small, ABS plastic
Includes dispenser and pre-installed mounting kit
Universal small box dispenser – shoe cover, cap, and other items
5.75”H x 13.75”W x 7”D (dispenser only)
Horizontal top feed or vertical side feed application
Made to easily change orientation on-site
Customer to define mounting preference (horizontal or vertical) at time of order.

46.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: IC-276
PPE dispenser, large, ABS plastic
Includes dispenser and pre-installed mounting kit
Universal large box dispenser – shoe cover, cap, and other items
10.125”H x 12.55”W x 10”D (dispenser only)

47.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: IC-268
Stainless Steel Bulk Dispenser
Includes dispenser and pre-installed mounting kit
Single compartment with hinged lid holds a variety of personal
protection apparel; including gloves, bouffant caps, shoe covers,
etc.
11.125”H x 12.25”W x 5.75”D (dispenser only)

48.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: IC-245
Face mask dispenser with mounting kit
Includes dispenser and pre-installed mounting kit
Holds one box of earloop face masks in bulk quantity
White ABS plastic and clear PETG plastic
5”H x 8.75”W x 4.375”D (dispenser only)

49. info@PaladinMP.com
(407) 614-8781 office
Sharps Containers
RAIL MOUNTING SOLUTIONS
If we don’t have an adapter kit already, we can make it for you.

50.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: IC-303
Universal mounting kit for most large sharps
containers (Kendall, Covidian, Bemis)
Does not include sharps container
Specific model number must be verified prior to order placement
Available with dispenser for turn-key installation. Contact your sales rep for details.
**

51.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: IC-309
Mounting kit for Daniels “Sharpsmart”
sharps container (S14 or S22) with lockable
bracket mount
Does not include sharps container
Available with dispenser for turn-key installation. Contact your sales rep for details.

52.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: IC-306
Mounting kit for Stericycle large sharps
container
Does not include sharps container

53.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: IC-311
Mounting kit for BD sharps container
(models 305447 and 305426)
Does not include sharps container

54. info@PaladinMP.com
(407) 614-8781 office
Baskets and Bins
INCLUDES ACCESSORY WITH ATTACHED RAIL MOUNT

55.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER:
SM-101
To accommodate cuffs up to thigh-sized
Plastic coated wire U-shaped basket
7”H x 6.75”W x 4”D (basket only)
Includes pre-installed rail mounting kit items described below
BP cuff basket with mounting kit

56.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: SM-102
Plastic coated wire basket
4.25”H x 10”W x 7”D (basket only)
Includes pre-installed rail mounting kit items described below
Small wire basket with mounting kit

57.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: SM-103
Plastic coated wire basket and dividers
4.25”H x 18”W x 10”D (basket only)
Includes pre-installed rail mounting kit items described below
Large wire basket and (3) moveable dividers
with mounting kit

58.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: SM-104
Plastic coated wire basket
10”H x 16.25”W x 15.5”D / 23.5”D fully extended
Includes pre-installed rail mounting kit items described below
Medium deep wire bin on pull-out glide
with mounting kit

59.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: SM-105
Plastic coated wire basket
10”H x 23”W x 15.5”D / 23.5”D fully extended
Includes pre-installed rail mounting kit items described below
Large deep wire bin on pull-out glide with
mounting kit

60.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: SM-201
White plastic box with clear plastic bins
9.5”H x 23.75”W x 6.5”D (box only)
Includes pre-installed rail mounting adapters described below
3 bin tilt-out storage container with
mounting kit

61.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: SM-202
White plastic box with clear plastic bins
8.25”H x 23.75”W x 5.5”D (box only)
Includes pre-installed rail mounting adapters described below
4 bin tilt-out storage container with
mounting kit

62.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: SM-203
White plastic box with clear plastic bins
6.5”H x 23.75”W x 4.5”D (box only)
Includes pre-installed rail mounting adapters described below
5 bin tilt-out storage container with
mounting kit

63. info@PaladinMP.com
(407) 614-8781 office
Clips and Hooks
INCLUDES ACCESSORY WITH ATTACHED RAIL MOUNT

64.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: SM-301
Hook and integrated mounting plate in a powder coat painted
anti-microbial finish (AMF)
2.5”H x 1.5”W x 4.5”D
Includes pre-installed rail mounting adapter described below
Powder coated metal wire hook with
integrated mounting plate and adapter

65.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: SM-302
Hooks and integrated mounting plate in a powder coat painted
anti-microbial finish (AMF)
2.5”H x 12”W x 4.5”D
Includes pre-installed rail mounting adapter described below
Powder coated triple metal wire hook with
integrated mounting plate and adapter
 Also available as: SM-307 with 2”D hooks or SM-308 with 0.75”D hooks

66.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: SM-305
Hook and integrated mounting plate in a powder coat painted
anti-microbial finish (AMF)
2.5”H x 1.5”W x 2”D
Includes pre-installed rail mounting adapter described below
Powder coated metal wire hook with
integrated mounting plate and adapter

67.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: SM-306
Hook and integrated mounting plate in a powder coat painted
anti-microbial finish (AMF)
2.5”H x 1.5”W x 0.75”D
Includes pre-installed rail mounting adapter described below
Powder coated metal wire hook with
integrated mounting plate and adapter

68.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: SM-303
Hook and integrated mounting plate in a powder coat painted
anti-microbial finish (AMF)
2.5”H x 1.5”W x 2.5”D
Includes pre-installed rail mounting adapter described below
Apron hangers not included
Lead apron powder coated metal hook with
integrated mounting plate and adapter

69.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: SM-304
Slide action loop and clip to secure cords, cables, and wires, or
to hold stethoscope.
3.5”H x 1.5”W x 0.75”D
Includes pre-installed rail mounting adapter described below
Cord bundler with adapter

70.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: SM-401
Plastic and metal clips on anti-microbial (AMF) powder coat
painted back-plate
2.5”H x 22”W x 1”D
Includes pre-installed rail mounting adapters described below
6 clip organizer with mounting kit

71.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: SM-402
Plastic and metal clips on anti-microbial (AMF) powder coat
painted back-plate
2.5”H x 9.75”W x 1”D
Includes pre-installed rail mounting adapters described below
3 clip organizer with mounting kit

72.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER:
 Also available in 24”L. Contact sales representative for details.
SM-406
Friction fit paper display rail. Release document by lifting
bottom of sheet up towards ceiling.
2.5”H x 22”W x 1”D
Includes pre-installed rail mounting adapter described below
Paper display rail with mounting kit

73. info@PaladinMP.com
(407) 614-8781 office
Shelves
INCLUDES ACCESSORY WITH ATTACHED RAIL MOUNT
Convenient fold down and stationary options. More available.

74.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: S-203
Metal with anti-microbial (AMF) powder coat painted finish
14.5”W x 13.5”D
Includes 0.75” lip on 3 sides to secure item placement
Includes pre-installed rail mount adapters
Fixed shelf with lip edges, large
 Also available in other sizes. Contact sales representative for details.

75.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: S-216
Non-anti-microbial molded plastic with pencil edge groove to
contain spills
14.75”W / 15.5”W (outside bracket to outside bracket) x 10”D
Pre-fabricated to include hardware and rail mounting adapter.
Complete as shown.
Fold down shelf, medium

76.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: S-220
Molded plastic with embedded anti-microbial compound
24”W / 24.25”W (outside mounting bracket to outside mounting
bracket) x 18”D
Pre-fabricated to include hardware and rail mounting adapter.
Complete as shown.
Weight limit 30 lbs.
Fold down tray, large

77. info@PaladinMP.com
(407) 614-8781 office
Other Helpful Accessories
ACCESSORIES AND RAIL MOUNTING SOLUTIONS
Remember, if you don’t see it, just ask for it.

78.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: AC-109-PM
User adjustable width to accommodate most mobile devices
Includes one pair of brackets (left and right) with factory
attached adapters
IPAD / Tablet / Mobile phone / Computer
holder

79.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: AC-101
Includes pre-installed adapter
Metal vacuum bottle slide with mount
 Also available in (AMF). Contact sales representative for details.

80.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: GCX-101
To mount a variety of equipment
25”H x 4”W
Includes (2) pre-installed adapters
Customer to provide distance between rails
GXC channel to span (2) rails at 16-24”
between rails
 Optional available equipment and mounts. Contact sales representative for details.

81.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: GCX-102
To mount a variety of equipment
31”H x 4”W
Includes (2) pre-installed adapters
Customer to provide distance between rails
GXC channel to span (2) rails at 20-28”
between rails
 Optional available equipment and mounts. Contact sales representative for details.

82.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: GCX-103
To mount a variety of equipment such as swing-arm IV pole
shown at right
47”H x 4”W
Includes (3) pre-installed adapters
Customer to provide distance between rails
GXC channel to span (3) rails at 20-28”
between rails
 Optional available equipment and mounts. Contact sales representative for details.

83.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: IM-201
36” infusion pump mounting pole with (2)
adjustable tension clamps attached to pre-
installed rail adapters.
Also includes 20” telescoping height
adjustable IV pole with integral 4-hook
hanger.

84.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: IM-301
Infusion pump mounting swing arm for attachment of infusion
pump and other pole-mount devices
Includes adjustable telescoping IV pole with 4 bag hanger
Does not include GCX channel
IV swing-arm holder with 4-hook IV bag
hanger

85.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: IM-405
1”Dia. x 4”H aluminum pole on 5”D anti-microbial (AMF)
powder-coat painted post
Pre-fabricated to include hardware and rail mounting adapter
Complete as shown
Universal mount for any device with a C-
clamp pole mount
Available with custom stand-off depth (greater or fewer than 5”) as defined by customer.

86.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: OGB-101
Includes pre-installed rail mount adapter
Does not include flow meters
Duplex Oxygen block with DISS outlets
 Available with Ohio, Chemtron, and 1/8” npt fittings.
 Available for Air and Vacuum. Contact sales representative for details.

87.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: VM-201
Integrated blender mount is standard
Includes pre-installed rail mount adapters
Double ventilator manifold with DISS
outlets, 2 Air and 2 Oxygen
 Available in 3/3 DISS configuration.
 Available with Chemtron or Ohmeda outlets. Contact your sales rep for details.

88.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: AC-105
Includes wire metal holder and pre-installed rail mount adapter
Does not include cylinder tank
Oxygen cylinder mount for D or E tank
cylinders

89.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: LM-101
Anti-microbial powder coat pained finish (AMF) machined metal
post with integrated Allen screw to secure light into post-hole
Includes pre-installed rail mount adapter
Waldmann light mount for Owner provided
light
Available complete with Waldmann Halux LED 20 light for turn-key installation.

90.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: AC-110
Includes pre-installed rail mount adapter
Telephone mount for standard wall
mounted telephones

91.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: A-112
CareFusion Razor mount for Owner
provided razor

92.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: AC-106-PM
Includes waste basket
Rail mount kit for 12 Qt. small vanity waste
basket (Rubbermaid).

93.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: CF-103
For quick and stable mounting of C-Frame to the “Evolution”
Fairfield-style rail and to the Paladin “Rapidus” cart.
Does not include C-Frame unit.
Herman Miller C-Frame rail mounting kit

94.  Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a
snap action adapter with positive snap attachment lock feature.
 Integrated Allen screws provide the ability to lock the adapter in place on rail.
 Standard adapters are plastic with embedded anti-microbial compound.
 Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength.
 Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | info@paladinmp.com
DESCRIPTION:
PART NUMBER: CF-101
Add equipment rail to Herman miler C-Frame for easy mounting
of accessories to side of C-Frame unit.
Does not include C-Frame unit.
Herman Miller C-Frame side rail kit

95. info@PaladinMP.com
(407) 614-8781 office
“EVOLUTION”
The Fairfield-Style
Medical Equipment Rail
APPLICATIONS
Installation Photos

96. info@PaladinMP.com
(407) 614-8781 office
APPLICATIONS

97. info@PaladinMP.com
(407) 614-8781 office
APPLICATIONS

98. info@PaladinMP.com
(407) 614-8781 office
APPLICATIONS
LEAN Inventory management and Improved Infection Control

99. info@PaladinMP.com
(407) 614-8781 office
APPLICATIONS
BEFORE
AFTER

100. info@PaladinMP.com
(407) 614-8781 office
APPLICATIONS
BEFORE
AFTER

101. info@PaladinMP.com
(407) 614-8781 office
APPLICATIONS

102. info@PaladinMP.com
(407) 614-8781 office
APPLICATIONS

103. info@PaladinMP.com
(407) 614-8781 office
APPLICATIONS