This document provides instructions for making a ribbon hair bow in 3 or fewer sentences. The instructions include a list of supplies needed and step-by-step directions for cutting ribbon to size, folding each piece into loops and securing them in the center with needle and thread to create layers, and then assembling the finished bow. Tips are provided such as customizing bow size and the number of ribbon pieces and layers used.
This document provides instructions for weaving various lace techniques by hand, including leno weaves, honeycomb patterns, and border designs. It begins with general directions for leno weaving and instructions for different types of leno twists. It then provides step-by-step directions for weaving specific lace patterns like antique Mexican leno, dogwood blossoms, peruvian gauze, and Tarascan lace. The document aims to teach hand manipulation techniques for weaving intricate lace designs using a pick-up stick.
This document provides instructions for making string figures using only a loop of string. It begins with an introduction to the history and global prevalence of string games. Several foundational techniques are explained such as making loops, bases, and joining string ends. Detailed steps and illustrations are given for over 15 different string figures including the cup and saucer, owl's eyes, saw, and mosquito. The document encourages experimentation and sharing string figures with others.
This document provides tips for re-drafting quilt patterns to better fit the intended space. It recommends evenly spacing patterns and using consistent angles of 45, 60, 90, 180 degrees to allow the pattern to flow well. Secondary patterns should be designed for corners and sashings. The document also discusses adapting patterns if they do not originally fit the space, and breaking patterns down into basic shapes for easier quilting according to the "Language of Quilting". Asymmetrical designs and centered motifs are suggested to use space differently.
The document provides folding instructions to create a Martian Bouncing Spider model. It consists of 18 steps to fold the paper into the shape of a spider with long legs that can bounce. The key steps include blintz folding the paper diagonally, folding each leg into 3 preliminary bases on top of each other, and then folding each leg into the shape of bird bases to create the bouncing effect. Wet folding or glue can be used to improve the bounce. When completed, the spider can be tapped to watch it bounce, and with practice can even be dribbled.
This document provides instructions for making plush Angry Birds toys from fleece fabric to play with over the holidays. It outlines 14 steps to sew together the body pieces, add facial features like eyes and a beak, and stuff the bird toy. Patterns are provided for additional Angry Birds characters like the yellow bird and green bird. The tutorial aims to make the popular mobile game more fun for kids to play with using soft plush versions of the characters.
This document provides instructions for making a ribbon bow with multiple layers. It includes supplies needed, different ways to fold ribbon, a ribbon length formula for different sized bows, and step-by-step instructions. The instructions demonstrate making a bow with 4 layers using a total of 26 ribbons cut in decreasing lengths for each layer. Tips are provided, such as experimenting with ribbon amounts and bow size. The bow is assembled by looping ribbons around a needle and sewing layers together.
This document provides instructions for making a plush toy resembling the enemy Chain Chomp from Super Mario games. It consists of three main parts: a spherical black and red ball body with appliqued face details, a cylindrical gray chain base attached to the body, and a long gray chain assembled from linked segments and attached to the base. The instructions provide step-by-step directions for cutting out the pattern pieces, assembling each part through sewing and turning, and attaching the parts together to complete the plush toy.
The document provides instructions for a table napkin project using calado embroidery, including transferring the design from tracing paper to linen, cutting yarns from the fabric, and using various embroidery stitches like overcasting, french stem stitch, and satin stitch to complete the design. Materials needed are linen fabric, embroidery thread, a sewing kit, tracing paper, and pounce powder for transferring the design. Dimensions for evaluating the finished project include the quality of materials, design, and workmanship using various embroidery stitches.
This document provides instructions for weaving various lace techniques by hand, including leno weaves, honeycomb patterns, and border designs. It begins with general directions for leno weaving and instructions for different types of leno twists. It then provides step-by-step directions for weaving specific lace patterns like antique Mexican leno, dogwood blossoms, peruvian gauze, and Tarascan lace. The document aims to teach hand manipulation techniques for weaving intricate lace designs using a pick-up stick.
This document provides instructions for making string figures using only a loop of string. It begins with an introduction to the history and global prevalence of string games. Several foundational techniques are explained such as making loops, bases, and joining string ends. Detailed steps and illustrations are given for over 15 different string figures including the cup and saucer, owl's eyes, saw, and mosquito. The document encourages experimentation and sharing string figures with others.
This document provides tips for re-drafting quilt patterns to better fit the intended space. It recommends evenly spacing patterns and using consistent angles of 45, 60, 90, 180 degrees to allow the pattern to flow well. Secondary patterns should be designed for corners and sashings. The document also discusses adapting patterns if they do not originally fit the space, and breaking patterns down into basic shapes for easier quilting according to the "Language of Quilting". Asymmetrical designs and centered motifs are suggested to use space differently.
The document provides folding instructions to create a Martian Bouncing Spider model. It consists of 18 steps to fold the paper into the shape of a spider with long legs that can bounce. The key steps include blintz folding the paper diagonally, folding each leg into 3 preliminary bases on top of each other, and then folding each leg into the shape of bird bases to create the bouncing effect. Wet folding or glue can be used to improve the bounce. When completed, the spider can be tapped to watch it bounce, and with practice can even be dribbled.
This document provides instructions for making plush Angry Birds toys from fleece fabric to play with over the holidays. It outlines 14 steps to sew together the body pieces, add facial features like eyes and a beak, and stuff the bird toy. Patterns are provided for additional Angry Birds characters like the yellow bird and green bird. The tutorial aims to make the popular mobile game more fun for kids to play with using soft plush versions of the characters.
This document provides instructions for making a ribbon bow with multiple layers. It includes supplies needed, different ways to fold ribbon, a ribbon length formula for different sized bows, and step-by-step instructions. The instructions demonstrate making a bow with 4 layers using a total of 26 ribbons cut in decreasing lengths for each layer. Tips are provided, such as experimenting with ribbon amounts and bow size. The bow is assembled by looping ribbons around a needle and sewing layers together.
This document provides instructions for making a plush toy resembling the enemy Chain Chomp from Super Mario games. It consists of three main parts: a spherical black and red ball body with appliqued face details, a cylindrical gray chain base attached to the body, and a long gray chain assembled from linked segments and attached to the base. The instructions provide step-by-step directions for cutting out the pattern pieces, assembling each part through sewing and turning, and attaching the parts together to complete the plush toy.
The document provides instructions for a table napkin project using calado embroidery, including transferring the design from tracing paper to linen, cutting yarns from the fabric, and using various embroidery stitches like overcasting, french stem stitch, and satin stitch to complete the design. Materials needed are linen fabric, embroidery thread, a sewing kit, tracing paper, and pounce powder for transferring the design. Dimensions for evaluating the finished project include the quality of materials, design, and workmanship using various embroidery stitches.
The document provides instructions for creating a zoetrope animation device. It explains that zoetrope strips contain a series of slightly different drawings to create the illusion of motion when spun. The instructions then detail how to design a 12-frame animation cycle and construct the zoetrope using paper, foam, a straw, and cookie stick. Students are asked to draw their animation, assemble the zoetrope parts, insert their drawing strip, and spin it while recording a video to submit.
This document provides instructions for making Viking knit jewelry. It discusses the origins of Viking knit, which involved decorating clothing with woven silver chains. The instructions then outline the materials and tools needed, and provide step-by-step directions for creating a basic Viking knit bracelet or necklace. Readers are guided through winding wire around a dowel to form a flower shape, and then single knitting additional wire through the flower petals in a looping stitch pattern moving around the dowel. Maintaining an even tension and fixing any kinks or inconsistencies in the stitching is emphasized.
This document provides instructions for making lanyards. It outlines the necessary equipment including beads, wire, hooks, and crimping tools. It describes how to attach the hook to the wire and gives tips for planning bead patterns and colors. The steps for stringing beads and attaching the finished wire are explained. Mistakes to avoid and finishing touches like attaching a tag are also covered. The overall goal is to make lanyards to raise money for childhood cancer research.
This document provides instructions for making a double wrap bangle bracelet using beads and wire. The bangle features a wrapped closure and does not require exact sizing, allowing leftover beads to be used. It is an easy project that makes a fun gift. Materials needed are 58" of 20 gauge round wire, beads, and basic pliers. Directions include wrapping the wire to form an eye, adding beads by wrapping the wire around each one, twisting the ends to form a hook, and shaping the bangle.
Imaginative Spring Butterfly Pendant Tutorial HouseofGems.com
This tutorial provides instructions for making a copper butterfly pendant using wire and beads in 13 steps. The list of necessary materials includes 20 gauge and 28-29 gauge copper or other metal wire, a 3.5mm copper bead, colorful beads in various sizes, and basic jewelry tools like pliers and cutters. The steps show how to shape the wire to form the butterfly body and wings, attach the central bead, and fill in the wings with wrapped beads to complete the pendant.
2. Hold the loop of string around
yourwrist.
You:
3. Now lift the left palm string with
yourrightindexfinger.Liftthe
righthandpalmstringwithyourleft
indexfinger.
4. Ask your friend to hold the string
underneathhiswrist.
5. Release the index and little finger
strings of both hands.
6. Pull your hands apart. Your
friend'shandwillbe"cut"from
thewrist!
7. The secret is that the loop around
thewristisnotactuallycut.Itis
simplyreleased.
This document provides instructions for inkle weaving on a simple fixed-heddle loom. It describes how to warp the loom by winding yarn alternately over and under pegs with heddles placed in between. Basic weaving techniques are explained, such as creating sheds by raising and lowering warp threads and passing the shuttle through. The document gives a sample project for weaving a belt and details each step from warping to finishing the woven piece.
The document provides instructions for making Coiled Gem Drop earrings. The earrings are created using wire coiling and figure eight techniques to form decorative frames. Faceted gemstones such as carnelian and garnet are strung on head pins and wire wrapped to attach as dangling accents from loops on the frames. The finished earrings measure 7/8 by 21/4 inches and showcase traditional basketry inspired coiling with Art Nouveau design elements.
This document provides instructions for making a ladder-style bead bracelet using various cylindrical beads and seed beads. The instructions are presented in a step-by-step format with accompanying photographs. The bracelet is made by stringing beads in rows, with the number of seed beads on either side of each row determining whether the bracelet lies flat. Additional instructions are provided for making matching beaded earrings. Materials needed and contact information for the author are listed at the end.
This free wire tutorial is by Judy Larson. It was published originally on www.beadinggem.com. Check out the site for more free tutorials, featured designers, inspirations and so much more.
Introduction to Amigurumi. Presentation on the history of how Amigurumi became a world wide craft, and how to get started making these tiny cute toys. With a simple Octo pattern included.
The document provides instructions for making a duct tape rose in 7 steps. It begins with ripping small pieces of duct tape into triangles to form petals and wrapping them around a piece of floral wire. Multiple petals are added to form the rose. Then, duct tape is wrapped around the top and bottom of the floral wire to form the stem. When complete, the duct tape rose is finished.
To make twisted cord: cut thread 3 times longer than desired length and tie knots at each end; tape one end to a table and twist the other end with a pencil until the cord twists on itself; knot the ends together and run fingers along the cord to finish. The finished twisted cord can be used for crafts like wrapping a notebook.
This document provides instructions for making lanyards. It lists the necessary equipment which includes beads, wire, lanyard hooks, crimp beads, and crimping tools. It describes how to attach the lanyard hook to the wire by placing crimp beads on the wire and folding it back through the hook before crimping. The document offers tips for planning bead combinations and styles, and avoiding mistakes like running out of beads. It outlines finishing the lanyard by attaching the wire back through beads and the lanyard hook using crimp beads. The overall goal is to make lanyards to support the Children's Neuroblastoma Cancer Foundation.
Tatting is a lace-making technique that uses a series of knots and loops to create decorative pieces. It originated in the 17th century and can be used to make edgings, doilies, jewelry, and other accessories. There are three main types of tatting: needle tatting, shuttle tatting, and crochet tatting. The document provides instructions on gathering materials, winding a shuttle, making double stitch knots, and continuing to practice basic tatting stitches and techniques like chains, rings, and picots.
This document provides instructions for making a "Snake Around the Pool" friendship bracelet using three different colored strings. The summary is as follows:
The instructions first list the materials needed which are three different colored craft threads, tape, scissors and a ruler. It then provides a brief introduction explaining that this bracelet features one thin line wrapping around it. The 8 steps then describe how to tie a knot at the top, secure the strings with tape, and alternately move the strings in and out in a repeating pattern 20 times to create the snake-like design. Finally, the document notes there are many other bracelet designs that can be made with experimentation.
This document provides a 16 step tutorial for making an elastic lace headband. It includes materials needed, such as feathers, leaves, berries, lace, felt, thread, and glue. Each step includes images and detailed instructions for assembling the headband, including measuring the head, cutting the lace, sewing the ends, adding decorative elements, and finishing. The creator requests photos of finished projects to promote readers' businesses and provides links to additional tutorials and products.
This document provides a 16 step tutorial for making an elastic lace headband. It includes materials needed, such as feathers, leaves, berries, birdcage veil, elastic lace, felt, thread, and glue. Each step includes images and detailed instructions for assembling the headband, including measuring the head, cutting the elastic, sewing the ends, adding decorative elements, and attaching a fabric flower. The creator requests photos of finished creations to showcase on their website and Facebook page to help promote other craft shops.
I made these DIY frames on which to stretch some painted canvases. The frames are constructed from some scraps of 1" thick oak stair treads and joined using half lap joints. I recommend using a softer wood than oak.
This took a little bit of practice, but the frames are easy and cheap to make.
Start with some painted or blank canvases. I recommend making two or three at the same time, because this project is made faster with repeat cuts.
The document provides instructions for creating a zoetrope animation device. It explains that zoetrope strips contain a series of slightly different drawings to create the illusion of motion when spun. The instructions then detail how to design a 12-frame animation cycle and construct the zoetrope using paper, foam, a straw, and cookie stick. Students are asked to draw their animation, assemble the zoetrope parts, insert their drawing strip, and spin it while recording a video to submit.
This document provides instructions for making Viking knit jewelry. It discusses the origins of Viking knit, which involved decorating clothing with woven silver chains. The instructions then outline the materials and tools needed, and provide step-by-step directions for creating a basic Viking knit bracelet or necklace. Readers are guided through winding wire around a dowel to form a flower shape, and then single knitting additional wire through the flower petals in a looping stitch pattern moving around the dowel. Maintaining an even tension and fixing any kinks or inconsistencies in the stitching is emphasized.
This document provides instructions for making lanyards. It outlines the necessary equipment including beads, wire, hooks, and crimping tools. It describes how to attach the hook to the wire and gives tips for planning bead patterns and colors. The steps for stringing beads and attaching the finished wire are explained. Mistakes to avoid and finishing touches like attaching a tag are also covered. The overall goal is to make lanyards to raise money for childhood cancer research.
This document provides instructions for making a double wrap bangle bracelet using beads and wire. The bangle features a wrapped closure and does not require exact sizing, allowing leftover beads to be used. It is an easy project that makes a fun gift. Materials needed are 58" of 20 gauge round wire, beads, and basic pliers. Directions include wrapping the wire to form an eye, adding beads by wrapping the wire around each one, twisting the ends to form a hook, and shaping the bangle.
Imaginative Spring Butterfly Pendant Tutorial HouseofGems.com
This tutorial provides instructions for making a copper butterfly pendant using wire and beads in 13 steps. The list of necessary materials includes 20 gauge and 28-29 gauge copper or other metal wire, a 3.5mm copper bead, colorful beads in various sizes, and basic jewelry tools like pliers and cutters. The steps show how to shape the wire to form the butterfly body and wings, attach the central bead, and fill in the wings with wrapped beads to complete the pendant.
2. Hold the loop of string around
yourwrist.
You:
3. Now lift the left palm string with
yourrightindexfinger.Liftthe
righthandpalmstringwithyourleft
indexfinger.
4. Ask your friend to hold the string
underneathhiswrist.
5. Release the index and little finger
strings of both hands.
6. Pull your hands apart. Your
friend'shandwillbe"cut"from
thewrist!
7. The secret is that the loop around
thewristisnotactuallycut.Itis
simplyreleased.
This document provides instructions for inkle weaving on a simple fixed-heddle loom. It describes how to warp the loom by winding yarn alternately over and under pegs with heddles placed in between. Basic weaving techniques are explained, such as creating sheds by raising and lowering warp threads and passing the shuttle through. The document gives a sample project for weaving a belt and details each step from warping to finishing the woven piece.
The document provides instructions for making Coiled Gem Drop earrings. The earrings are created using wire coiling and figure eight techniques to form decorative frames. Faceted gemstones such as carnelian and garnet are strung on head pins and wire wrapped to attach as dangling accents from loops on the frames. The finished earrings measure 7/8 by 21/4 inches and showcase traditional basketry inspired coiling with Art Nouveau design elements.
This document provides instructions for making a ladder-style bead bracelet using various cylindrical beads and seed beads. The instructions are presented in a step-by-step format with accompanying photographs. The bracelet is made by stringing beads in rows, with the number of seed beads on either side of each row determining whether the bracelet lies flat. Additional instructions are provided for making matching beaded earrings. Materials needed and contact information for the author are listed at the end.
This free wire tutorial is by Judy Larson. It was published originally on www.beadinggem.com. Check out the site for more free tutorials, featured designers, inspirations and so much more.
Introduction to Amigurumi. Presentation on the history of how Amigurumi became a world wide craft, and how to get started making these tiny cute toys. With a simple Octo pattern included.
The document provides instructions for making a duct tape rose in 7 steps. It begins with ripping small pieces of duct tape into triangles to form petals and wrapping them around a piece of floral wire. Multiple petals are added to form the rose. Then, duct tape is wrapped around the top and bottom of the floral wire to form the stem. When complete, the duct tape rose is finished.
To make twisted cord: cut thread 3 times longer than desired length and tie knots at each end; tape one end to a table and twist the other end with a pencil until the cord twists on itself; knot the ends together and run fingers along the cord to finish. The finished twisted cord can be used for crafts like wrapping a notebook.
This document provides instructions for making lanyards. It lists the necessary equipment which includes beads, wire, lanyard hooks, crimp beads, and crimping tools. It describes how to attach the lanyard hook to the wire by placing crimp beads on the wire and folding it back through the hook before crimping. The document offers tips for planning bead combinations and styles, and avoiding mistakes like running out of beads. It outlines finishing the lanyard by attaching the wire back through beads and the lanyard hook using crimp beads. The overall goal is to make lanyards to support the Children's Neuroblastoma Cancer Foundation.
Tatting is a lace-making technique that uses a series of knots and loops to create decorative pieces. It originated in the 17th century and can be used to make edgings, doilies, jewelry, and other accessories. There are three main types of tatting: needle tatting, shuttle tatting, and crochet tatting. The document provides instructions on gathering materials, winding a shuttle, making double stitch knots, and continuing to practice basic tatting stitches and techniques like chains, rings, and picots.
This document provides instructions for making a "Snake Around the Pool" friendship bracelet using three different colored strings. The summary is as follows:
The instructions first list the materials needed which are three different colored craft threads, tape, scissors and a ruler. It then provides a brief introduction explaining that this bracelet features one thin line wrapping around it. The 8 steps then describe how to tie a knot at the top, secure the strings with tape, and alternately move the strings in and out in a repeating pattern 20 times to create the snake-like design. Finally, the document notes there are many other bracelet designs that can be made with experimentation.
This document provides a 16 step tutorial for making an elastic lace headband. It includes materials needed, such as feathers, leaves, berries, lace, felt, thread, and glue. Each step includes images and detailed instructions for assembling the headband, including measuring the head, cutting the lace, sewing the ends, adding decorative elements, and finishing. The creator requests photos of finished projects to promote readers' businesses and provides links to additional tutorials and products.
This document provides a 16 step tutorial for making an elastic lace headband. It includes materials needed, such as feathers, leaves, berries, birdcage veil, elastic lace, felt, thread, and glue. Each step includes images and detailed instructions for assembling the headband, including measuring the head, cutting the elastic, sewing the ends, adding decorative elements, and attaching a fabric flower. The creator requests photos of finished creations to showcase on their website and Facebook page to help promote other craft shops.
I made these DIY frames on which to stretch some painted canvases. The frames are constructed from some scraps of 1" thick oak stair treads and joined using half lap joints. I recommend using a softer wood than oak.
This took a little bit of practice, but the frames are easy and cheap to make.
Start with some painted or blank canvases. I recommend making two or three at the same time, because this project is made faster with repeat cuts.
1. This bow is so much fun!! And it is very easy to make! The possibilities with this bow are endless!
SUPPLIES NEEDED
♥ Needle & Thread
♥ Double Prong Alligator Clip (Optional, but VERY helpful)
♥ Scissors
♥ Either a lighter or a wood burning tool for heat-sealing the ribbon
♥ Barrette(s)
♥ Something for the top of the bow to cover the stitching (buttons, resins, etc.)
♥ Ribbon (not pictured)
♥ Ruler or Cutting Mat (not pictured)
2. First of all, there are different ways to fold your ribbon onto the needle to achieve distinct looks. You
could even mix and match within the same bow. I used dotted ribbon so that you can see the
“right” and “wrong” side to the ribbon.
A B C D
A. This is the Figure 8 fold. I will be using this technique in the demonstration below.
B. This is an Inside-Out fold.
C. This is just a straight down fold.
D. I’ll call this one the backwards fold – it only works with solid color ribbon – otherwise, your
pattern (the dots) won’t show.
RIBBON LENGTH FORMULA
(Width of Bow x 2) + 2 inches = Length of ribbon for the first layer. For each subsequent layer,
subtract 1 inch.
3 inch bow 3 ½ inch bow 4 inch bow
Layer 1 8 inches 9 inches 10 inches
Layer 2 7 inches 8 inches 9 inches
Layer 3 6 inches 7 inches 8 inches
Layer 4 5 inches 6 inches 7 inches
Layer 5 - 5 inches 6 inches
Layer 6 - - 5 inches
4 ½ inch bow 5 inch bow 5 ½ inch bow
Layer 1 11 inches 12 inches 13 inches
Layer 2 10 inches 11 inches 12 inches
Layer 3 9 inches 10 inches 11 inches
Layer 4 8 inches 9 inches 10 inches
Layer 5 7 inches 8 inches 9 inches
Layer 6 6 inches 7 inches 8 inches
Layer 7 5 inches 6 inches 7 inches
Layer 8 - 5 inches 6 inches
Layer 9 - - 5 inches
3. TIPS
♥ You can make this bow as big or as small as you want.
♥ For each subsequent layer, you’ll need to decrease the ribbon length by 1
inch – you could even decrease it by ½ inch if you want – it all depends on
the look you’re trying to achieve.
♥ You can use as many or as few pieces of ribbon for each layer.
Experiment to see what you like.
♥ You can decide how many layers you want.
♥ Once your ribbon length gets to 5 inches, it may be too small – but it’s up
to you.
♥ For each piece of ribbon you cut, you will get 2 loops. So if you cut SIX
pieces, you will get 12 loops.
DETAILS FOR THIS DEMONSTRATION
Layer 1: SIX 9” pieces
Layer 2: FIVE 8” pieces
Layer 3: FOUR 7” pieces
Layer 4: FOUR 6” pieces
So let’s get started. ☺
1 2 3
1. Once you have all your ribbon cut to size, heat-seal the ends with your preferred method.
2. Take the ribbon for LAYER 1 and place it all on top of each other. For the ribbon that only has
the print on one side (the dots), you need to make sure that you place it PRINT DOWN. In this
example, I placed a dotted ribbon at the bottom of the stack to illustrate how you need to fold the
ribbon for Step 3. If you’re only using solid ribbon, it won’t matter how you fold it in Step 3.
3. Take one end of the “Stack” and bring it around to the other end, forming a loop. Notice how the
dotted ribbon is now face-up. In fact, the two dotted ribbons will be touching each other.
4. 4 5 6
4. Now you will have both ends of the ribbon stacked together.
5. At the other end you will have formed a loop.
6. Take your needle and place it into the center of the loop, stopping when the ribbon gets about
half way onto the needle. Hold onto the needle with your dominant hand and let go of the
ribbon.
7 8 9
7. Fan all the pieces of ribbon out into an even shape. You can play around with this until you get
the ribbon exactly where you want it.
8. At this point I have found it VERY helpful to use a double prong alligator clip to hold the ribbon in
place. Place the clip so that the needle is in between the two prongs. At any point, if the
alligator clip becomes an annoyance, just remove it.
9. Take one end of the bottom piece of ribbon and fold it in your desired shape and place the end
onto the needle.
Continued on next page…….
5. 10 11 12
10. Now take the ribbon directly next to the one you just folded and do the same thing.
11. Continue all the way around the bow. You may need to re-shape some of the loops to make
sure that everything is even.
12. Now you can pull your needle all the way through until the knot stops at the back. Then take
the needle and put it back through the middle of the bow – making a stitch through the center.
Repeat this 4 or 5 times – or until you feel comfortable with the bow staying together.
13 14 15
13. If you find it difficult to get the needle through all the layers of ribbon, then use a hard surface to
push the needle through, rather than using your fingers.
14. When you’re finished, this is what the bow will look like.
15. If you flip the bow over, you can see that you don’t have the ends showing. You can use either
side as the “top”.
16
16. At this point you can also sew on a 2 ½” piece of ribbon to the side that will be the BOTTOM of
the bow. This piece of ribbon will be used as another measure of keeping your bow attached to
the barrette. See Step 19.
NOW REPEAT STEPS 2 THROUGH 16 WITH EACH ADDITIONAL LAYER.
6. 17 18 19
17. If it’s possible for you, you can sew the layers together. However, I have a very hard time doing
this and so I glue each layer together. Use either Hi-Temp hot glue or E-6000, which you can
find at Wal-Mart and most craft stores.
18. Here is what this bow looks like with all the layers glued together.
19. Glue your clip to the back of the bow. Use the added piece of ribbon to glue across the barrette
for additional stability.
Add your center embellishment for a completed hair bow.