Plant is a living organism that grows in a permanent location like trees, shrubs, herbs, grasses, ferns and mosses. The main parts of a plant include the root, which absorbs water and minerals, the stem which transports water and nutrients, leaves which perform photosynthesis, and flowers which are involved in reproduction. Plants have many uses for humans including food, clothing, shelter, medicine and paper. They can be propagated through both sexual reproduction using seeds and asexual reproduction using methods like cuttings, bulbs and grafting. The document then lists and describes several medicinal plants commonly used in the Philippines like akapulko, ampalaya, bayabas, lagundi, luya
This document describes the Watermelon Peperomia plant. It is a foliage plant with alternate, rosette patterned leaves on long pink or red petioles. The leaves are variegated with silver stripes like a watermelon. It prefers medium-low light and should be allowed to dry slightly between waterings to avoid overwatering, as it can suffer in poor drainage conditions.
The wax plant, Hoya carnosa, is a dicot foliage plant with opposite, waxy leaves that are 2-4 inches long and variable in shape and color. It produces fragrant white and pink flowers in groups and is usually grown as a hanging basket, thriving in bright sunlight with plenty of water and good drainage while being susceptible to mealy bugs.
This document provides information about the Wandering Jew plant. It is a viny monocot foliage plant with alternate leaves that are purplish elliptical on the back and have two metallic stripes on the front. The stem is green with purple spots or vice versa. It likes to be constantly wet, will grow in most light conditions but prefers medium light, can be propagated through stem cuttings, is easy to grow often in hanging baskets, and has few problems.
The Tahitian Bridal Veil plant is a thin-stemmed monocot vine with small elliptical leaves that are often purple on the back and wrap around the green or purple stem. It produces small white flowers with three petals and yellow stamens and grows best in bright, filtered sunlight when its soil is kept evenly moist.
The Umbrella Schefflera is a large dicot foliage plant that can grow 6-15 feet tall. It has large palmately compound leaves up to 1-2 feet wide made up of 5-11 leaflets. It prefers bright indirect light and drying out between waterings. As an indicator plant, it is susceptible to many problems if temperatures get too low or light/water conditions are not suitable.
This document provides information about the Swedish Ivy plant (Plectranthusaureus). It is a vining dicot plant with opposite, glossy green rounded leaves. The squared stem can be red or purple and is covered with fine fuzz. Leaves have a crenate (scalloped) margin and stain hands when crushed. Swedish Ivy thrives in bright light but can survive low light. It can tolerate a lot of water but will survive with less. Propagation is through stem cuttings. Common problems include aphids.
This document provides information about the Swedish Ivy plant (Plectranthusaureus). It is a vining dicot plant with opposite, glossy green rounded leaves. The squared stem can be red or purple and is covered with fine fuzz. Leaves have a crenate margin and stain hands when crushed. Swedish Ivy thrives in bright light but can survive low light. It can tolerate a lot of water but will survive with less. Propagation is through stem cuttings. Common problems include aphids.
Plant is a living organism that grows in a permanent location like trees, shrubs, herbs, grasses, ferns and mosses. The main parts of a plant include the root, which absorbs water and minerals, the stem which transports water and nutrients, leaves which perform photosynthesis, and flowers which are involved in reproduction. Plants have many uses for humans including food, clothing, shelter, medicine and paper. They can be propagated through both sexual reproduction using seeds and asexual reproduction using methods like cuttings, bulbs and grafting. The document then lists and describes several medicinal plants commonly used in the Philippines like akapulko, ampalaya, bayabas, lagundi, luya
This document describes the Watermelon Peperomia plant. It is a foliage plant with alternate, rosette patterned leaves on long pink or red petioles. The leaves are variegated with silver stripes like a watermelon. It prefers medium-low light and should be allowed to dry slightly between waterings to avoid overwatering, as it can suffer in poor drainage conditions.
The wax plant, Hoya carnosa, is a dicot foliage plant with opposite, waxy leaves that are 2-4 inches long and variable in shape and color. It produces fragrant white and pink flowers in groups and is usually grown as a hanging basket, thriving in bright sunlight with plenty of water and good drainage while being susceptible to mealy bugs.
This document provides information about the Wandering Jew plant. It is a viny monocot foliage plant with alternate leaves that are purplish elliptical on the back and have two metallic stripes on the front. The stem is green with purple spots or vice versa. It likes to be constantly wet, will grow in most light conditions but prefers medium light, can be propagated through stem cuttings, is easy to grow often in hanging baskets, and has few problems.
The Tahitian Bridal Veil plant is a thin-stemmed monocot vine with small elliptical leaves that are often purple on the back and wrap around the green or purple stem. It produces small white flowers with three petals and yellow stamens and grows best in bright, filtered sunlight when its soil is kept evenly moist.
The Umbrella Schefflera is a large dicot foliage plant that can grow 6-15 feet tall. It has large palmately compound leaves up to 1-2 feet wide made up of 5-11 leaflets. It prefers bright indirect light and drying out between waterings. As an indicator plant, it is susceptible to many problems if temperatures get too low or light/water conditions are not suitable.
This document provides information about the Swedish Ivy plant (Plectranthusaureus). It is a vining dicot plant with opposite, glossy green rounded leaves. The squared stem can be red or purple and is covered with fine fuzz. Leaves have a crenate (scalloped) margin and stain hands when crushed. Swedish Ivy thrives in bright light but can survive low light. It can tolerate a lot of water but will survive with less. Propagation is through stem cuttings. Common problems include aphids.
This document provides information about the Swedish Ivy plant (Plectranthusaureus). It is a vining dicot plant with opposite, glossy green rounded leaves. The squared stem can be red or purple and is covered with fine fuzz. Leaves have a crenate margin and stain hands when crushed. Swedish Ivy thrives in bright light but can survive low light. It can tolerate a lot of water but will survive with less. Propagation is through stem cuttings. Common problems include aphids.
The Southern Yew is a conifer with long, dark green needles and unusual fruit-like cones. It grows best in medium light and should be allowed to dry out between waterings to avoid overwatering. It can be propagated from stem cuttings or seeds and is poisonous, so it faces few pest problems.
Standard carnations are dicot plants with opposite, bluish green leaves that are long, narrow, curled, and covered in white wax. They produce many colored flowers individually on stems from fat calyces. To select healthy carnations, look for long straight stems supporting flowers without brown or gray petals and undamaged calyces. Changing preservative water and keeping carnations cool extends their 2 week lifespan out of storage. Most carnations are grown in Colombia.
Sprenger asparagus (Asparagus densiflorus 'Sprengeri') is a weeping foliage plant with small, narrow leaves arranged in whorls along thorny stems. It produces white flowers and orange berries, and prefers bright, filtered light with consistently moist soil and high humidity. Propagation is through stem cuttings or division, and the main problems arise from low humidity or becoming rootbound.
The spider plant (Chlorophytum comosum) is a monocot foliage plant known for its long, narrow leaves arranged in an alternating pattern that looks whorled. It produces baby plants on above-ground stolons and may flower in bright light. It prefers medium to bright filtered light and moist soil, propagating easily through natural tip layering or in water.
Scotch broom is a dicot plant used for cut flowers and foliage. It has small or nonexistent leaves, ridged four-sided stems with buds, and occasional small yellow flowers. Good scotch broom for arrangements has long straight stems without disease or damage that last a long time wet or dry. While cultivated for its flowers, scotch broom has escaped and become a noxious weed in the Pacific Northwest.
Salal is a dicot plant native to the Pacific Northwest with large oval leaves arranged alternately on zigzag stems that are green and red. It has small, thick petioles and leaves that are light green and glossy. When picking salal for cut flowers, choose those of an appropriate size without holes, spots or damage. To keep salal fresh, store in cool water and it will last for months; it can also be used dry or painted.
The Prayer Plant is a foliage dicot with oval leaves that have darker patches on either side of the midrib, and sometimes red veins. The newest leaf is rolled up and leaves may fold slightly at night. It likes medium light and to be kept warm and moist, almost like an African Violet. Potential problems include brown tips if too dry, rotting if too wet, and spider mites.
Plumosus asparagus is a monocot plant with multiple needle-like, fuzzy leaves arranged in whorls on stems that grow up to 2 feet tall and bend horizontally. It needs bright indirect light, moist soil, and division for propagation, and its main problem is underwatering.
This document provides information about the Red Edge Dracaena plant. It is a monocot foliage plant with long, narrow leaves arranged alternately with a distinctive red edge. It has a grey stem marked with leaf scars. It should be watered after the soil dries out and grown in medium light conditions like an east window. It can be propagated through stem cuttings or air layering. It is often grouped with other sized plants in one pot and its stems can be braided. Common pests include spider mites, mealybugs, and scale.
The Peace Lily is an easy to care for foliage plant with long drooping leaves that appear whorled around a low, compact stem. It produces white spadix flowers and thrives with little light and care indoors, making it one of the best low light plants. Potential issues include scale insects.
The Ovalleaf Peperomia is an easy to grow foliage plant with thick oval or rounded leaves that are sometimes variegated. It has thick stems that can have red or orange spots and produces tall thin greenish flower spikes. It should be watered by letting the soil dry completely between waterings and grown in bright to filtered light in a south or west facing window. It can be propagated through leaf bud or stem cuttings and may be susceptible to scale and mealybug infestations.
The document summarizes information about the Norfolk Island Pine plant. It is a conifer that reproduces through cones and has a woody stem and needles. It has reverse apical dominance so it is wider at the top. It prefers medium to bright light and needs good drainage, not being too wet or dry. It can become large and fill a large area when mature.
The document summarizes information about the Norfolk Island Pine plant. It is a conifer that reproduces through cones and has a woody stem and needles. It prefers medium to bright light from a south or west window, and needs good drainage as it can show symptoms of over- or underwatering. The Norfolk Island Pine is the only conifer on the fall plant list and has a wider canopy at the top in a reverse apical dominance pattern.
Nephthytis, also known as Trileaf Wonder or Syngonium podophyllum, is a dicot foliage plant commonly grown as a hanging basket or potted plant. It has arrow-shaped leaves that are sometimes divided into three lobes and may be variegated white or pink. The plant should be allowed to dry between waterings with bright, filtered light and can be propagated through stem cuttings.
Monocots and dicots are two major groups of flowering plants that differ in key characteristics. Monocots typically have one cotyledon, parallel leaf veins, flowers with parts in multiples of three, and vascular bundles in stems, while dicots usually have two cotyledons, netted leaf veins, flowers with four or five parts, and ring-patterned stem cross-sections. Both may have fibrous root systems but dicots can also have taproots.
This document provides information about the Mother-in-law's Tongue plant. It is a monocot foliage plant with sword-shaped leaves in an alternate leaf arrangement that has horizontal grayish tiger stripes. The thick, waxy leaves can tolerate a wide range of light and watering conditions and are propagated through leaf cuttings.
This document provides information about miniature carnations, including their identification, how to pick healthy specimens, how to keep them fresh, and where they are typically grown. Miniature carnations have bluish green stems and curled, narrow leaves that resemble monocots, with lumps at the nodes and flowers that come in many colors on smaller stems than standard carnations. They should be picked with long, straight stems that support the flowers without brown or gray discoloration or split calyces, and kept cool out of sunlight, changing the water and using a floral preservative to last about two weeks. Most miniature carnations are grown in Colombia.
Leatherleaf fern is a true fern used for cut foliage. It has a single frond that is deeply cut with a fancy border and a long, hollow petiole that may have brown fluff. The glossy green fronds reproduce via spores on the back. Good leatherleaf ferns for purchase have large, undamaged, glossy fronds. To keep the fronds alive longer, keep them wet in an enclosed container or plastic bag. Leatherleaf ferns are grown outdoors in frost-free areas like Florida, with quality declining after the first frost. They dry out quickly and can develop brown spots if exposed to cold.
The jade plant, also known as Crassulaovata, is an easy to grow dicot foliage plant with thick waxy oval leaves that are opposite and spoon-shaped without petioles. It has thick green stems that look woody when older, small white flowers with pink stars in winter, and should be watered infrequently allowing the soil to dry well between waterings while placed in a south-facing window with adequate drainage to avoid overwatering issues.
The document discusses the Heartleaf Philodendron plant. It is a vining dicot foliage plant that is often confused with Devil's Ivy but can be distinguished by its truly heart-shaped leaves rather than straight-across leaves. It requires bright, filtered light and infrequent watering, letting the soil dry between waterings. Propagation is through stem cuttings and it is generally easy to care for with few problems.
How to Get CNIC Information System with Paksim Ga.pptxdanishmna97
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
The Southern Yew is a conifer with long, dark green needles and unusual fruit-like cones. It grows best in medium light and should be allowed to dry out between waterings to avoid overwatering. It can be propagated from stem cuttings or seeds and is poisonous, so it faces few pest problems.
Standard carnations are dicot plants with opposite, bluish green leaves that are long, narrow, curled, and covered in white wax. They produce many colored flowers individually on stems from fat calyces. To select healthy carnations, look for long straight stems supporting flowers without brown or gray petals and undamaged calyces. Changing preservative water and keeping carnations cool extends their 2 week lifespan out of storage. Most carnations are grown in Colombia.
Sprenger asparagus (Asparagus densiflorus 'Sprengeri') is a weeping foliage plant with small, narrow leaves arranged in whorls along thorny stems. It produces white flowers and orange berries, and prefers bright, filtered light with consistently moist soil and high humidity. Propagation is through stem cuttings or division, and the main problems arise from low humidity or becoming rootbound.
The spider plant (Chlorophytum comosum) is a monocot foliage plant known for its long, narrow leaves arranged in an alternating pattern that looks whorled. It produces baby plants on above-ground stolons and may flower in bright light. It prefers medium to bright filtered light and moist soil, propagating easily through natural tip layering or in water.
Scotch broom is a dicot plant used for cut flowers and foliage. It has small or nonexistent leaves, ridged four-sided stems with buds, and occasional small yellow flowers. Good scotch broom for arrangements has long straight stems without disease or damage that last a long time wet or dry. While cultivated for its flowers, scotch broom has escaped and become a noxious weed in the Pacific Northwest.
Salal is a dicot plant native to the Pacific Northwest with large oval leaves arranged alternately on zigzag stems that are green and red. It has small, thick petioles and leaves that are light green and glossy. When picking salal for cut flowers, choose those of an appropriate size without holes, spots or damage. To keep salal fresh, store in cool water and it will last for months; it can also be used dry or painted.
The Prayer Plant is a foliage dicot with oval leaves that have darker patches on either side of the midrib, and sometimes red veins. The newest leaf is rolled up and leaves may fold slightly at night. It likes medium light and to be kept warm and moist, almost like an African Violet. Potential problems include brown tips if too dry, rotting if too wet, and spider mites.
Plumosus asparagus is a monocot plant with multiple needle-like, fuzzy leaves arranged in whorls on stems that grow up to 2 feet tall and bend horizontally. It needs bright indirect light, moist soil, and division for propagation, and its main problem is underwatering.
This document provides information about the Red Edge Dracaena plant. It is a monocot foliage plant with long, narrow leaves arranged alternately with a distinctive red edge. It has a grey stem marked with leaf scars. It should be watered after the soil dries out and grown in medium light conditions like an east window. It can be propagated through stem cuttings or air layering. It is often grouped with other sized plants in one pot and its stems can be braided. Common pests include spider mites, mealybugs, and scale.
The Peace Lily is an easy to care for foliage plant with long drooping leaves that appear whorled around a low, compact stem. It produces white spadix flowers and thrives with little light and care indoors, making it one of the best low light plants. Potential issues include scale insects.
The Ovalleaf Peperomia is an easy to grow foliage plant with thick oval or rounded leaves that are sometimes variegated. It has thick stems that can have red or orange spots and produces tall thin greenish flower spikes. It should be watered by letting the soil dry completely between waterings and grown in bright to filtered light in a south or west facing window. It can be propagated through leaf bud or stem cuttings and may be susceptible to scale and mealybug infestations.
The document summarizes information about the Norfolk Island Pine plant. It is a conifer that reproduces through cones and has a woody stem and needles. It has reverse apical dominance so it is wider at the top. It prefers medium to bright light and needs good drainage, not being too wet or dry. It can become large and fill a large area when mature.
The document summarizes information about the Norfolk Island Pine plant. It is a conifer that reproduces through cones and has a woody stem and needles. It prefers medium to bright light from a south or west window, and needs good drainage as it can show symptoms of over- or underwatering. The Norfolk Island Pine is the only conifer on the fall plant list and has a wider canopy at the top in a reverse apical dominance pattern.
Nephthytis, also known as Trileaf Wonder or Syngonium podophyllum, is a dicot foliage plant commonly grown as a hanging basket or potted plant. It has arrow-shaped leaves that are sometimes divided into three lobes and may be variegated white or pink. The plant should be allowed to dry between waterings with bright, filtered light and can be propagated through stem cuttings.
Monocots and dicots are two major groups of flowering plants that differ in key characteristics. Monocots typically have one cotyledon, parallel leaf veins, flowers with parts in multiples of three, and vascular bundles in stems, while dicots usually have two cotyledons, netted leaf veins, flowers with four or five parts, and ring-patterned stem cross-sections. Both may have fibrous root systems but dicots can also have taproots.
This document provides information about the Mother-in-law's Tongue plant. It is a monocot foliage plant with sword-shaped leaves in an alternate leaf arrangement that has horizontal grayish tiger stripes. The thick, waxy leaves can tolerate a wide range of light and watering conditions and are propagated through leaf cuttings.
This document provides information about miniature carnations, including their identification, how to pick healthy specimens, how to keep them fresh, and where they are typically grown. Miniature carnations have bluish green stems and curled, narrow leaves that resemble monocots, with lumps at the nodes and flowers that come in many colors on smaller stems than standard carnations. They should be picked with long, straight stems that support the flowers without brown or gray discoloration or split calyces, and kept cool out of sunlight, changing the water and using a floral preservative to last about two weeks. Most miniature carnations are grown in Colombia.
Leatherleaf fern is a true fern used for cut foliage. It has a single frond that is deeply cut with a fancy border and a long, hollow petiole that may have brown fluff. The glossy green fronds reproduce via spores on the back. Good leatherleaf ferns for purchase have large, undamaged, glossy fronds. To keep the fronds alive longer, keep them wet in an enclosed container or plastic bag. Leatherleaf ferns are grown outdoors in frost-free areas like Florida, with quality declining after the first frost. They dry out quickly and can develop brown spots if exposed to cold.
The jade plant, also known as Crassulaovata, is an easy to grow dicot foliage plant with thick waxy oval leaves that are opposite and spoon-shaped without petioles. It has thick green stems that look woody when older, small white flowers with pink stars in winter, and should be watered infrequently allowing the soil to dry well between waterings while placed in a south-facing window with adequate drainage to avoid overwatering issues.
The document discusses the Heartleaf Philodendron plant. It is a vining dicot foliage plant that is often confused with Devil's Ivy but can be distinguished by its truly heart-shaped leaves rather than straight-across leaves. It requires bright, filtered light and infrequent watering, letting the soil dry between waterings. Propagation is through stem cuttings and it is generally easy to care for with few problems.
How to Get CNIC Information System with Paksim Ga.pptxdanishmna97
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
Essentials of Automations: The Art of Triggers and Actions in FMESafe Software
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...SOFTTECHHUB
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.
UiPath Test Automation using UiPath Test Suite series, part 6DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
UiPath Test Automation using UiPath Test Suite series, part 5DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Climate Impact of Software Testing at Nordic Testing DaysKari Kakkonen
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slackshyamraj55
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdfMalak Abu Hammad
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Removing Uninteresting Bytes in Software FuzzingAftab Hussain
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!SOFTTECHHUB
As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024Neo4j
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank
Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.