Jade Plant Show
•Download as PPTX, PDF•
0 likes•185 views
The jade plant, also known as Crassulaovata, is an easy to grow dicot foliage plant with thick waxy oval leaves that are opposite and spoon-shaped without petioles. It has thick green stems that look woody when older, small white flowers with pink stars in winter, and should be watered infrequently allowing the soil to dry well between waterings while placed in a south-facing window with adequate drainage to avoid overwatering issues.
Report
Share
Report
Share
Recommended
Emerald ripple peperomia show
The Emerald Ripple Peperomia has lilypad-like leaves with deep veins and long petioles with pink or red streaks, and leaves can be dark green, blackish purple or variegated. It prefers medium-low light and should be allowed to dry slightly between waterings, and can be propagated through leaf cuttings or grown in a terrarium. Overwatering or poor drainage may cause problems.
Woody Plants Group 2a
The document provides descriptions of 6 plant species:
1. Rhus glabra (Smooth Sumac) - Shrub or small tree with compound leaves and red fruit clusters.
2. Rhus typhina (Staghorn Sumac) - Large open shrub or weedy tree with pubescent leaves and red fruit spikes.
3. Eleagnus angustifolia (Russian Olive) - Invasive shrub or small tree with silver foliage and yellow fruit.
4. Aesculus glabra (Ohio Buckeye) - Medium tree with palmately compound leaves and spiny nutlets.
5. Aesculus hippocastanum (Horsechest
Creeping charlie show
Creeping Charley is a low growing plant with opposite, rounded leaves that have deep veins and a crenate margin. It loves water and medium light, often growing well in hanging baskets or east and north windows. Creeping Charley propagates easily through stem cuttings and is an easy to care for foliage plant that may occasionally have aphid problems.
Miniature carnation show
This document provides information about miniature carnations, including their identification, how to pick healthy specimens, how to keep them fresh, and where they are typically grown. Miniature carnations have bluish green stems and curled, narrow leaves that resemble monocots, with lumps at the nodes and flowers that come in many colors on smaller stems than standard carnations. They should be picked with long, straight stems that support the flowers without brown or gray discoloration or split calyces, and kept cool out of sunlight, changing the water and using a floral preservative to last about two weeks. Most miniature carnations are grown in Colombia.
Standard carnation show
Standard carnations are dicot plants with opposite, bluish green leaves that are long, narrow, curled, and covered in white wax. They produce many colored flowers individually on stems from fat calyces. To select healthy carnations, look for long straight stems supporting flowers without brown or gray petals and undamaged calyces. Changing preservative water and keeping carnations cool extends their 2 week lifespan out of storage. Most carnations are grown in Colombia.
Woody Plants Group 3a
The document summarizes several species of trees and shrubs in the rose family that are suitable for the prairies, including their key identifying features and characteristics. It describes the Saskatoon serviceberry (Amelanchier alnifolia) as a native, cold-hardy shrub or small tree with white flowers in spring and purple fruit in summer. It also outlines the identifying features of species in the hawthorn genus (Crataegus) like the Russian hawthorn, thornless cockspur hawthorn and Washington hawthorn which have white flowers, red fruit, and yellow or red fall color. Finally, it lists crabapple species (Malus) and the American plum (P
Peace lily show
The Peace Lily is an easy to care for foliage plant with long drooping leaves that appear whorled around a low, compact stem. It produces white spadix flowers and thrives with little light and water, making it one of the best plants for low-light indoor conditions. Potential issues include scale insects.
Prayer plant show
The Prayer Plant is a foliage dicot with oval leaves that have darker patches on either side of the midrib, and sometimes red veins. The newest leaf is rolled up and leaves may fold slightly at night. It likes medium light and to be kept warm and moist, almost like an African Violet. Potential problems include brown tips if too dry, rotting if too wet, and spider mites.
Recommended
Emerald ripple peperomia show
The Emerald Ripple Peperomia has lilypad-like leaves with deep veins and long petioles with pink or red streaks, and leaves can be dark green, blackish purple or variegated. It prefers medium-low light and should be allowed to dry slightly between waterings, and can be propagated through leaf cuttings or grown in a terrarium. Overwatering or poor drainage may cause problems.
Woody Plants Group 2a
The document provides descriptions of 6 plant species:
1. Rhus glabra (Smooth Sumac) - Shrub or small tree with compound leaves and red fruit clusters.
2. Rhus typhina (Staghorn Sumac) - Large open shrub or weedy tree with pubescent leaves and red fruit spikes.
3. Eleagnus angustifolia (Russian Olive) - Invasive shrub or small tree with silver foliage and yellow fruit.
4. Aesculus glabra (Ohio Buckeye) - Medium tree with palmately compound leaves and spiny nutlets.
5. Aesculus hippocastanum (Horsechest
Creeping charlie show
Creeping Charley is a low growing plant with opposite, rounded leaves that have deep veins and a crenate margin. It loves water and medium light, often growing well in hanging baskets or east and north windows. Creeping Charley propagates easily through stem cuttings and is an easy to care for foliage plant that may occasionally have aphid problems.
Miniature carnation show
This document provides information about miniature carnations, including their identification, how to pick healthy specimens, how to keep them fresh, and where they are typically grown. Miniature carnations have bluish green stems and curled, narrow leaves that resemble monocots, with lumps at the nodes and flowers that come in many colors on smaller stems than standard carnations. They should be picked with long, straight stems that support the flowers without brown or gray discoloration or split calyces, and kept cool out of sunlight, changing the water and using a floral preservative to last about two weeks. Most miniature carnations are grown in Colombia.
Standard carnation show
Standard carnations are dicot plants with opposite, bluish green leaves that are long, narrow, curled, and covered in white wax. They produce many colored flowers individually on stems from fat calyces. To select healthy carnations, look for long straight stems supporting flowers without brown or gray petals and undamaged calyces. Changing preservative water and keeping carnations cool extends their 2 week lifespan out of storage. Most carnations are grown in Colombia.
Woody Plants Group 3a
The document summarizes several species of trees and shrubs in the rose family that are suitable for the prairies, including their key identifying features and characteristics. It describes the Saskatoon serviceberry (Amelanchier alnifolia) as a native, cold-hardy shrub or small tree with white flowers in spring and purple fruit in summer. It also outlines the identifying features of species in the hawthorn genus (Crataegus) like the Russian hawthorn, thornless cockspur hawthorn and Washington hawthorn which have white flowers, red fruit, and yellow or red fall color. Finally, it lists crabapple species (Malus) and the American plum (P
Peace lily show
The Peace Lily is an easy to care for foliage plant with long drooping leaves that appear whorled around a low, compact stem. It produces white spadix flowers and thrives with little light and water, making it one of the best plants for low-light indoor conditions. Potential issues include scale insects.
Prayer plant show
The Prayer Plant is a foliage dicot with oval leaves that have darker patches on either side of the midrib, and sometimes red veins. The newest leaf is rolled up and leaves may fold slightly at night. It likes medium light and to be kept warm and moist, almost like an African Violet. Potential problems include brown tips if too dry, rotting if too wet, and spider mites.
Heartleaf philodendron show
The document discusses the Heartleaf Philodendron plant. It is a vining dicot foliage plant that is often confused with Devil's Ivy but can be distinguished by its truly heart-shaped leaves rather than straight-across leaves. It requires bright, filtered light and infrequent watering, letting the soil dry between waterings. Propagation is through stem cuttings and it is generally easy to care for with few problems.
Creeping Fig Show
Creeping Fig (Ficus pumila) is a small, ground-covering dicot plant with alternate, leathery leaves that are slightly wrinkled and hairy on top. It has very thin, twisted woody stems and stays low and horizontal. It prefers medium to low light and needs to be kept evenly moist, as it is unforgiving of drying out and wilting which can cause it to die. Potential problems include underwatering, spider mites, and scale.
Gardening sheet ribes malvaceum
This document summarizes information about the Chaparral Currant shrub, including that it is native to coastal mountain foothills and ranges in California and Baja Mexico, grows to 6-8 feet tall and wide, and has pink flowers from November to March followed by purple-black berries in spring. It is drought tolerant once established and attracts birds and pollinators to its flowers and fruits. It requires full sun to part shade and any well-draining soil, and can be pruned or cut back when dormant.
Woody Plants Group 3b
The document describes 13 different tree species from the rose family including various types of plum, cherry, pear, and mountain ash trees. It provides details on the size, shape, foliage, flowers, fruit, and bark for each one. Key identifying features are highlighted such as leaf arrangement and margins, flower and fruit colors, and bark textures. Landscape uses are noted including providing shade, attracting birds, and displaying fall foliage and fruit.
Creeping fig show
Creeping fig is a small, creeping foliage plant with thin, twisted, woody stems that stay close to the ground. It has small, leathery leaves that are sometimes variegated with scattered hairs on top. To care for creeping fig, keep the soil evenly moist in medium to low light and propagate through stem cuttings. It is sensitive to underwatering and can die if it dries out.
Woody Plants Group 6a
The document provides descriptions of 6 woody plant species in the Populus genus: Populus alba (white poplar), Populus angustifolia (narrowleaf cottonwood), Populus deltoides/sargentii (plains cottonwood), Populus nigra 'Italica' (Lombardy poplar), Populus tremuloides (quaking aspen), and Populus x acuminata (lanceleaf cottonwood). Each species description includes key identifying features such as leaf shape and margins, bud and bark characteristics, growth form, and flowering details. The document also provides images of diagnostic characteristics to aid in visual identification of the Populus species.
Yew show
The yew (Taxus species) is an evergreen coniferous plant that can grow 3-25 feet tall depending on the cultivar. It has short-stalked, dark green needles on top and yellowish green needles with two stripes on the back. Large rounded reproductive buds form laterally on the stems. Females produce brown seeds surrounded by red arils. Yews spread 3-12 feet and thrive in USDA plant hardiness zones 4-7. They have few pest problems and can be pruned into various shapes year-round, though all parts are poisonous.
Swedish ivy show
This document provides information about the Swedish Ivy plant (Plectranthusaureus). It is a vining dicot plant with opposite, glossy green rounded leaves. The squared stem can be red or purple and is covered with fine fuzz. Leaves have a crenate margin and stain hands when crushed. Swedish Ivy thrives in bright light but can survive low light. It can tolerate a lot of water but will survive with less. Propagation is through stem cuttings. Common problems include aphids.
Swedish ivy show 2
This document provides information about the Swedish Ivy plant (Plectranthusaureus). It is a vining dicot plant with opposite, glossy green rounded leaves. The square stem can be red or purple and is covered with fine fuzz. Leaves have a wavy edge and stain hands when crushed. Swedish Ivy thrives in bright light but can survive low light. It can tolerate a lot of water but will survive with less. Propagation is through stem cuttings. Common problems include aphids.
Indiana Plants
This document provides information about several common plant species found in Indiana, including their general characteristics, environmental needs, and how they are affected by their environment. It describes lilacs, asters, white pines, red maples, trumpet creepers, and New Jersey tea, noting traits such as color, bloom time, height, soil and sunlight requirements, and vulnerabilities to factors like drought, shade, and pests. It concludes by outlining an experiment for students to identify and study these plant varieties in their own environment.
Watermelon Peperomia Show
This document describes the Watermelon Peperomia plant. It is a foliage plant with alternate, rosette patterned leaves on long pink or red petioles. The leaves are variegated with silver stripes like a watermelon. It prefers medium-low light and should be allowed to dry slightly between waterings to avoid overwatering, as it can suffer in poor drainage conditions.
Wax Plant
The wax plant, Hoya carnosa, is a dicot foliage plant with opposite, waxy leaves that are 2-4 inches long and variable in shape and color. It produces fragrant white and pink flowers in groups and is usually grown as a hanging basket, thriving in bright sunlight with plenty of water and good drainage while being susceptible to mealy bugs.
Wandering Jew Show
This document provides information about the Wandering Jew plant. It is a viny monocot foliage plant with alternate leaves that are purplish elliptical on the back and have two metallic stripes on the front. The stem is green with purple spots or vice versa. It likes to be constantly wet, will grow in most light conditions but prefers medium light, can be propagated through stem cuttings, is easy to grow often in hanging baskets, and has few problems.
Tahitian Bridal Veil Show
The Tahitian Bridal Veil plant is a thin-stemmed monocot vine with small elliptical leaves that are often purple on the back and wrap around the green or purple stem. It produces small white flowers with three petals and yellow stamens and grows best in bright, filtered sunlight when its soil is kept evenly moist.
Umbrella Shefflera Show
The Umbrella Schefflera is a large dicot foliage plant that can grow 6-15 feet tall. It has large palmately compound leaves up to 1-2 feet wide made up of 5-11 leaflets. It prefers bright indirect light and drying out between waterings. As an indicator plant, it is susceptible to many problems if temperatures get too low or light/water conditions are not suitable.
Swedish Ivy Show 2
This document provides information about the Swedish Ivy plant (Plectranthusaureus). It is a vining dicot plant with opposite, glossy green rounded leaves. The squared stem can be red or purple and is covered with fine fuzz. Leaves have a crenate (scalloped) margin and stain hands when crushed. Swedish Ivy thrives in bright light but can survive low light. It can tolerate a lot of water but will survive with less. Propagation is through stem cuttings. Common problems include aphids.
Swedish Ivy Show
This document provides information about the Swedish Ivy plant (Plectranthusaureus). It is a vining dicot plant with opposite, glossy green rounded leaves. The squared stem can be red or purple and is covered with fine fuzz. Leaves have a crenate margin and stain hands when crushed. Swedish Ivy thrives in bright light but can survive low light. It can tolerate a lot of water but will survive with less. Propagation is through stem cuttings. Common problems include aphids.
Southern Yew Show
The Southern Yew is a conifer with long, dark green needles and unusual fruit-like cones. It grows best in medium light and should be allowed to dry out between waterings to avoid overwatering. It can be propagated from stem cuttings or seeds and is poisonous, so it faces few pest problems.
Standard Carnation Show
Standard carnations are dicot plants with opposite, bluish green leaves that are long, narrow, curled, and covered in white wax. They produce many colored flowers individually on stems from fat calyces. To select healthy carnations, look for long straight stems supporting flowers without brown or gray petals and undamaged calyces. Changing preservative water and keeping carnations cool extends their 2 week lifespan out of storage. Most carnations are grown in Colombia.
Sprenger Asparagus Show
Sprenger asparagus (Asparagus densiflorus 'Sprengeri') is a weeping foliage plant with small, narrow leaves arranged in whorls along thorny stems. It produces white flowers and orange berries, and prefers bright, filtered light with consistently moist soil and high humidity. Propagation is through stem cuttings or division, and the main problems arise from low humidity or becoming rootbound.
Spider Plant Show
The spider plant (Chlorophytum comosum) is a monocot foliage plant known for its long, narrow leaves arranged in an alternating pattern that looks whorled. It produces baby plants on above-ground stolons and may flower in bright light. It prefers medium to bright filtered light and moist soil, propagating easily through natural tip layering or in water.
Scotch Broom Show
Scotch broom is a dicot plant used for cut flowers and foliage. It has small or nonexistent leaves, ridged four-sided stems with buds, and occasional small yellow flowers. Good scotch broom for arrangements has long straight stems without disease or damage that last a long time wet or dry. While cultivated for its flowers, scotch broom has escaped and become a noxious weed in the Pacific Northwest.
More Related Content
What's hot
Heartleaf philodendron show
The document discusses the Heartleaf Philodendron plant. It is a vining dicot foliage plant that is often confused with Devil's Ivy but can be distinguished by its truly heart-shaped leaves rather than straight-across leaves. It requires bright, filtered light and infrequent watering, letting the soil dry between waterings. Propagation is through stem cuttings and it is generally easy to care for with few problems.
Creeping Fig Show
Creeping Fig (Ficus pumila) is a small, ground-covering dicot plant with alternate, leathery leaves that are slightly wrinkled and hairy on top. It has very thin, twisted woody stems and stays low and horizontal. It prefers medium to low light and needs to be kept evenly moist, as it is unforgiving of drying out and wilting which can cause it to die. Potential problems include underwatering, spider mites, and scale.
Gardening sheet ribes malvaceum
This document summarizes information about the Chaparral Currant shrub, including that it is native to coastal mountain foothills and ranges in California and Baja Mexico, grows to 6-8 feet tall and wide, and has pink flowers from November to March followed by purple-black berries in spring. It is drought tolerant once established and attracts birds and pollinators to its flowers and fruits. It requires full sun to part shade and any well-draining soil, and can be pruned or cut back when dormant.
Woody Plants Group 3b
The document describes 13 different tree species from the rose family including various types of plum, cherry, pear, and mountain ash trees. It provides details on the size, shape, foliage, flowers, fruit, and bark for each one. Key identifying features are highlighted such as leaf arrangement and margins, flower and fruit colors, and bark textures. Landscape uses are noted including providing shade, attracting birds, and displaying fall foliage and fruit.
Creeping fig show
Creeping fig is a small, creeping foliage plant with thin, twisted, woody stems that stay close to the ground. It has small, leathery leaves that are sometimes variegated with scattered hairs on top. To care for creeping fig, keep the soil evenly moist in medium to low light and propagate through stem cuttings. It is sensitive to underwatering and can die if it dries out.
Woody Plants Group 6a
The document provides descriptions of 6 woody plant species in the Populus genus: Populus alba (white poplar), Populus angustifolia (narrowleaf cottonwood), Populus deltoides/sargentii (plains cottonwood), Populus nigra 'Italica' (Lombardy poplar), Populus tremuloides (quaking aspen), and Populus x acuminata (lanceleaf cottonwood). Each species description includes key identifying features such as leaf shape and margins, bud and bark characteristics, growth form, and flowering details. The document also provides images of diagnostic characteristics to aid in visual identification of the Populus species.
Yew show
The yew (Taxus species) is an evergreen coniferous plant that can grow 3-25 feet tall depending on the cultivar. It has short-stalked, dark green needles on top and yellowish green needles with two stripes on the back. Large rounded reproductive buds form laterally on the stems. Females produce brown seeds surrounded by red arils. Yews spread 3-12 feet and thrive in USDA plant hardiness zones 4-7. They have few pest problems and can be pruned into various shapes year-round, though all parts are poisonous.
Swedish ivy show
This document provides information about the Swedish Ivy plant (Plectranthusaureus). It is a vining dicot plant with opposite, glossy green rounded leaves. The squared stem can be red or purple and is covered with fine fuzz. Leaves have a crenate margin and stain hands when crushed. Swedish Ivy thrives in bright light but can survive low light. It can tolerate a lot of water but will survive with less. Propagation is through stem cuttings. Common problems include aphids.
Swedish ivy show 2
This document provides information about the Swedish Ivy plant (Plectranthusaureus). It is a vining dicot plant with opposite, glossy green rounded leaves. The square stem can be red or purple and is covered with fine fuzz. Leaves have a wavy edge and stain hands when crushed. Swedish Ivy thrives in bright light but can survive low light. It can tolerate a lot of water but will survive with less. Propagation is through stem cuttings. Common problems include aphids.
Indiana Plants
This document provides information about several common plant species found in Indiana, including their general characteristics, environmental needs, and how they are affected by their environment. It describes lilacs, asters, white pines, red maples, trumpet creepers, and New Jersey tea, noting traits such as color, bloom time, height, soil and sunlight requirements, and vulnerabilities to factors like drought, shade, and pests. It concludes by outlining an experiment for students to identify and study these plant varieties in their own environment.
What's hot (10)
More from Glenbrook South H. S.
Watermelon Peperomia Show
This document describes the Watermelon Peperomia plant. It is a foliage plant with alternate, rosette patterned leaves on long pink or red petioles. The leaves are variegated with silver stripes like a watermelon. It prefers medium-low light and should be allowed to dry slightly between waterings to avoid overwatering, as it can suffer in poor drainage conditions.
Wax Plant
The wax plant, Hoya carnosa, is a dicot foliage plant with opposite, waxy leaves that are 2-4 inches long and variable in shape and color. It produces fragrant white and pink flowers in groups and is usually grown as a hanging basket, thriving in bright sunlight with plenty of water and good drainage while being susceptible to mealy bugs.
Wandering Jew Show
This document provides information about the Wandering Jew plant. It is a viny monocot foliage plant with alternate leaves that are purplish elliptical on the back and have two metallic stripes on the front. The stem is green with purple spots or vice versa. It likes to be constantly wet, will grow in most light conditions but prefers medium light, can be propagated through stem cuttings, is easy to grow often in hanging baskets, and has few problems.
Tahitian Bridal Veil Show
The Tahitian Bridal Veil plant is a thin-stemmed monocot vine with small elliptical leaves that are often purple on the back and wrap around the green or purple stem. It produces small white flowers with three petals and yellow stamens and grows best in bright, filtered sunlight when its soil is kept evenly moist.
Umbrella Shefflera Show
The Umbrella Schefflera is a large dicot foliage plant that can grow 6-15 feet tall. It has large palmately compound leaves up to 1-2 feet wide made up of 5-11 leaflets. It prefers bright indirect light and drying out between waterings. As an indicator plant, it is susceptible to many problems if temperatures get too low or light/water conditions are not suitable.
Swedish Ivy Show 2
This document provides information about the Swedish Ivy plant (Plectranthusaureus). It is a vining dicot plant with opposite, glossy green rounded leaves. The squared stem can be red or purple and is covered with fine fuzz. Leaves have a crenate (scalloped) margin and stain hands when crushed. Swedish Ivy thrives in bright light but can survive low light. It can tolerate a lot of water but will survive with less. Propagation is through stem cuttings. Common problems include aphids.
Swedish Ivy Show
This document provides information about the Swedish Ivy plant (Plectranthusaureus). It is a vining dicot plant with opposite, glossy green rounded leaves. The squared stem can be red or purple and is covered with fine fuzz. Leaves have a crenate margin and stain hands when crushed. Swedish Ivy thrives in bright light but can survive low light. It can tolerate a lot of water but will survive with less. Propagation is through stem cuttings. Common problems include aphids.
Southern Yew Show
The Southern Yew is a conifer with long, dark green needles and unusual fruit-like cones. It grows best in medium light and should be allowed to dry out between waterings to avoid overwatering. It can be propagated from stem cuttings or seeds and is poisonous, so it faces few pest problems.
Standard Carnation Show
Standard carnations are dicot plants with opposite, bluish green leaves that are long, narrow, curled, and covered in white wax. They produce many colored flowers individually on stems from fat calyces. To select healthy carnations, look for long straight stems supporting flowers without brown or gray petals and undamaged calyces. Changing preservative water and keeping carnations cool extends their 2 week lifespan out of storage. Most carnations are grown in Colombia.
Sprenger Asparagus Show
Sprenger asparagus (Asparagus densiflorus 'Sprengeri') is a weeping foliage plant with small, narrow leaves arranged in whorls along thorny stems. It produces white flowers and orange berries, and prefers bright, filtered light with consistently moist soil and high humidity. Propagation is through stem cuttings or division, and the main problems arise from low humidity or becoming rootbound.
Spider Plant Show
The spider plant (Chlorophytum comosum) is a monocot foliage plant known for its long, narrow leaves arranged in an alternating pattern that looks whorled. It produces baby plants on above-ground stolons and may flower in bright light. It prefers medium to bright filtered light and moist soil, propagating easily through natural tip layering or in water.
Scotch Broom Show
Scotch broom is a dicot plant used for cut flowers and foliage. It has small or nonexistent leaves, ridged four-sided stems with buds, and occasional small yellow flowers. Good scotch broom for arrangements has long straight stems without disease or damage that last a long time wet or dry. While cultivated for its flowers, scotch broom has escaped and become a noxious weed in the Pacific Northwest.
Salal Show
Salal is a dicot plant native to the Pacific Northwest with large oval leaves arranged alternately on zigzag stems that are green and red. It has small, thick petioles and leaves that are light green and glossy. When picking salal for cut flowers, choose those of an appropriate size without holes, spots or damage. To keep salal fresh, store in cool water and it will last for months; it can also be used dry or painted.
Prayer Plant Show
The Prayer Plant is a foliage dicot with oval leaves that have darker patches on either side of the midrib, and sometimes red veins. The newest leaf is rolled up and leaves may fold slightly at night. It likes medium light and to be kept warm and moist, almost like an African Violet. Potential problems include brown tips if too dry, rotting if too wet, and spider mites.
Plumosus Asparagus Show
Plumosus asparagus is a monocot plant with multiple needle-like, fuzzy leaves arranged in whorls on stems that grow up to 2 feet tall and bend horizontally. It needs bright indirect light, moist soil, and division for propagation, and its main problem is underwatering.
Red Edge Dracaena Show
This document provides information about the Red Edge Dracaena plant. It is a monocot foliage plant with long, narrow leaves arranged alternately with a distinctive red edge. It has a grey stem marked with leaf scars. It should be watered after the soil dries out and grown in medium light conditions like an east window. It can be propagated through stem cuttings or air layering. It is often grouped with other sized plants in one pot and its stems can be braided. Common pests include spider mites, mealybugs, and scale.
Peace Lily Show
The Peace Lily is an easy to care for foliage plant with long drooping leaves that appear whorled around a low, compact stem. It produces white spadix flowers and thrives with little light and care indoors, making it one of the best low light plants. Potential issues include scale insects.
Ovalleaf Peperomia Show
The Ovalleaf Peperomia is an easy to grow foliage plant with thick oval or rounded leaves that are sometimes variegated. It has thick stems that can have red or orange spots and produces tall thin greenish flower spikes. It should be watered by letting the soil dry completely between waterings and grown in bright to filtered light in a south or west facing window. It can be propagated through leaf bud or stem cuttings and may be susceptible to scale and mealybug infestations.
Norfolk Show
The document summarizes information about the Norfolk Island Pine plant. It is a conifer that reproduces through cones and has a woody stem and needles. It has reverse apical dominance so it is wider at the top. It prefers medium to bright light and needs good drainage, not being too wet or dry. It can become large and fill a large area when mature.
Norfolk Island Show
The document summarizes information about the Norfolk Island Pine plant. It is a conifer that reproduces through cones and has a woody stem and needles. It prefers medium to bright light from a south or west window, and needs good drainage as it can show symptoms of over- or underwatering. The Norfolk Island Pine is the only conifer on the fall plant list and has a wider canopy at the top in a reverse apical dominance pattern.
More from Glenbrook South H. S. (20)
Recently uploaded
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
By Design, not by Accident - Agile Venture Bolzano 2024
As presented at the Agile Venture Bolzano, 4.06.2024
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
Artificial Intelligence for XMLDevelopment
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
Elizabeth Buie - Older adults: Are we really designing for our future selves?
Elizabeth Buie - Older adults: Are we really designing for our future selves?
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.
20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
20240605 QFM017 Machine Intelligence Reading List May 2024
Everything I found interesting about machines behaving intelligently during May 2024
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
How to Get CNIC Information System with Paksim Ga.pptx
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
Communications Mining Series - Zero to Hero - Session 1
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
Pushing the limits of ePRTC: 100ns holdover for 100 days
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
Video Streaming: Then, Now, and in the Future
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AI
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AIVladimir Iglovikov, Ph.D.
Presented by Vladimir Iglovikov:
- https://www.linkedin.com/in/iglovikov/
- https://x.com/viglovikov
- https://www.instagram.com/ternaus/
This presentation delves into the journey of Albumentations.ai, a highly successful open-source library for data augmentation.
Created out of a necessity for superior performance in Kaggle competitions, Albumentations has grown to become a widely used tool among data scientists and machine learning practitioners.
This case study covers various aspects, including:
People: The contributors and community that have supported Albumentations.
Metrics: The success indicators such as downloads, daily active users, GitHub stars, and financial contributions.
Challenges: The hurdles in monetizing open-source projects and measuring user engagement.
Development Practices: Best practices for creating, maintaining, and scaling open-source libraries, including code hygiene, CI/CD, and fast iteration.
Community Building: Strategies for making adoption easy, iterating quickly, and fostering a vibrant, engaged community.
Marketing: Both online and offline marketing tactics, focusing on real, impactful interactions and collaborations.
Mental Health: Maintaining balance and not feeling pressured by user demands.
Key insights include the importance of automation, making the adoption process seamless, and leveraging offline interactions for marketing. The presentation also emphasizes the need for continuous small improvements and building a friendly, inclusive community that contributes to the project's growth.
Vladimir Iglovikov brings his extensive experience as a Kaggle Grandmaster, ex-Staff ML Engineer at Lyft, sharing valuable lessons and practical advice for anyone looking to enhance the adoption of their open-source projects.
Explore more about Albumentations and join the community at:
GitHub: https://github.com/albumentations-team/albumentations
Website: https://albumentations.ai/
LinkedIn: https://www.linkedin.com/company/100504475
Twitter: https://x.com/albumentationsRecently uploaded (20)
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...
By Design, not by Accident - Agile Venture Bolzano 2024
By Design, not by Accident - Agile Venture Bolzano 2024
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Elizabeth Buie - Older adults: Are we really designing for our future selves?
Elizabeth Buie - Older adults: Are we really designing for our future selves?
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
20240605 QFM017 Machine Intelligence Reading List May 2024
20240605 QFM017 Machine Intelligence Reading List May 2024
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
How to Get CNIC Information System with Paksim Ga.pptx
How to Get CNIC Information System with Paksim Ga.pptx
Communications Mining Series - Zero to Hero - Session 1
Communications Mining Series - Zero to Hero - Session 1
Pushing the limits of ePRTC: 100ns holdover for 100 days
Pushing the limits of ePRTC: 100ns holdover for 100 days
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AI
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AI
Jade Plant Show
- 1. Jade Plant Crassulaovata Group: Foliage Plant Type of Plant: Dicot Leaf Arrangement: Opposite Identification: Thick waxy oval leaves, sometimes with red edges Leaves somewhat spoon shaped with no petiole Thick green stem, looks woody when older Small dimples evident on top surface Flowers, groups of small white with pink stars in winter
- 2. Jade Plant Crassulaovata Water: Let dry well between watering Light: South window Propagation: Leaf bud or stem cutting Culture: Easy to grow if adequate drainage is provided Problems: Overwatering, mealy bug, scale