1. OptoACTIVE
™
The System You’ve
Dreamed Of.
Ultra Slim ANC Headphones for 95%
MR EPI Noise Reduction in Real-Time
The Only Active Noise Control
Communications System for MRI
SOUND SOLUTIONS FROM LIGHT TECHNOLOGY
2. +
OptoACTIVE
™
Total Noise Control and Two-Way
Communications System for MRI
Passive
The Answer to Your Dreams.
OptoACTIVE™ provides the highest level of noise
Active
reduction available in MRI-safe headphones, and is
the only communications system to use real-time
algorithmic, active harmonic noise cancelling, as
well as Optoacoustics’ proprietary passive noise
reduction techniques, to reduce 95 percent of MR
EPI main gradient resonance for the patient. Noise Control
OptoACTIVE Benefits:
Safely cancels EPI main gradient noise
Unsurpassed sound clarity An
Quiet two-way communication during
a scan Safely and effectively
Achievement
Records sound as patient hears it reduces EPI noise by 60 dB in Quiet
Self-calibrating with SPL monitoring in (over 95%) without latency.
real time
Enables use of high fidelity audio stimuli OptoACTIVE uses two complementary techniques to eliminate
EPI main gradient noise for the patient:
Instant control over performance with
digital touch display Optimal passive noise reduction with a revolutionary slim design,
resulting in unsurpassed sound clarity, wearer comfort and safety
Concurrent multiple audio inputs,
Real-time algorithmic, out-of-phase harmonic active noise cancelling using
including TTL our proprietary DSP
Certified EMI/RFI immunity The System reduces gradient noise so effectively that we’ve even added Waves® MaxxAudio digital sound
enhancement. Voice and high-fidelity audio has never sounded better in MRI.
3. Engineering that
Rivals Magic
Ultra-slim OptoACTIVE headphones are
designed for advanced 20- or 32-channel
+
coils used in 3T and 7T fMRI.
OptoACTIVE provides the slimmest and most sensitive
headphones available today for use in MRI, with a
frequency response range of 50-20,000 Hz.
Built-in optical microphones enable automatic
Slim
self-calibration, SPL monitoring and real-time in-ear
stereo sound recording.
With its proprietary DSP and predictive behavior
algorithms, OptoACTIVE sets the standard for robust,
dependable active noise control in a wide variety of
applications and settings, regardless of the MRI
platform.
Robust Ideal for the study of:
Sleeping disorders, autism, children
Engineering suffering from claustrophobia,
auditory fMRI and many other new
research areas that were previously
impractical or unattainable.
OptoACTIVE is used in the world’s leading MR research
facilities, and comes bundled with our industry-leading
FOMRI-III™ noise cancelling microphone.
4. +
Self-Calibrates in
Less Than 20 Seconds
Smart
Simple
Operation LCD touch-screen
control console displays noise
exposure, stimuli levels and spectrum
OptoACTIVE matches innovation with operating simplicity,
enabling you to focus entirely on the research at hand.
analysis in real time.
The system is completely self-calibrating, session-by-session,
Patient-by-Patient. A short sequence of screen taps tells At every moment, the technician can access all basic
OptoACTIVE to calibrate its advanced noise cancelling noise cancelling, advanced attenuation and channel
algorithms for a scan – an operation that takes 16 seconds and selection. OptoACTIVE uses a hybrid LCD digital touch
requires no specialized knowledge or operator intervention. and pushbutton console that intuitively controls:
Embedded DSP algorithms are optimized for the challenging Initial and ongoing calibrations
acoustic characteristics of MRI, including resonance frequencies, Real time noise cancelling
dynamic range and varying duty-cycle time events.
Channel level volume and recording
Our bundled OptiMRI software enables concurrent recording of
Music mixing with left/right gain control
built-in left and right channel microphone outputs, filtered
speech processed by the DSP, and up to three synchronized TTL Full duplex in-line PTT communications
events. A complete set of output post-processing capabilities is FOMRI-III noise-cancelling microphone
also provided.
5. System Accessories
The Challenge of EPI Sequence Noise in MRI OptoACTIVE accessories enable the highest possible system
performance and operating throughput.
EPI sequences used in fMRI are the loudest in
MR imaging, sometimes exceeding 120 dB in a MAIN EPI NOISE AT 117 dB SPL (RED)
3T scanner. That equates to the noise intensity Quiet 2-Way
of a jet engine at takeoff. Even more challenging PASSIVE ATTENUATION (GREEN) Communication
for engineers than the intensity of MRI noise are with FOMRI-III™
60 dB
the noise transients and harmonics that are Microphone
generated at up to several KHz during various The gold-standard for high quality
fMRI duty cycles, and which exhibit endless MRI speech recording and operating
patterns of variation. simplicity comes bundled with
ACTIVE + PASSIVE ATTENUATION (BLUE)
To solve this, Optoacoustics has developed and OptoACTIVE headphones.
implemented a tailor-made, selective digital The FOMRI-III noise cancelling
algorithm which actively attenuates EPI gradient microphone can be mounted
noise in all its forms. Our proprietary real-time Frequency domain graph showing full securely on any sized head coil, Hear precisely
using our instant strap-on what is said inside
method drives the same noise created by the 60 dB attenuation (95%) of the main EPI gooseneck boom.
the bore, and
MR machine out of phase, then feeds it back resonance, resulting from combined Completely safe, this ultra-flexible
into the patient’s headphones. When both real synchronize speech
passive and active noise cancellation. mount enables extremely close to TTL signals in
and out-of-phase sounds are superimposed, true voice proximity and filtered
real time.
noise cancellation is achieved. recording with low latency.
Crisp, clear speech in real time
Selectable, automatic noise reduction
MR SUITE CONTROL ROOM
Synchronize speech with up to 3 TTL signals
OptoACTIVE Headphones
™
DSP + Monitor, record and broadcast filtered speech
in RF Head Coil
Electro- Plug-and-play operation
Optical Strap-on microphone mounting on your RF coil
Unit The OptoACTIVE system is
Fiber Optic Cable
15 m a product of more than a
decade of acoustics
RS-232 Cable
research, MRI applied OptoVAC Vacuum
engineering, and close Enhancer
partnering with leading
Two-Way MRI research facilities. Easily attaches to headphones
Ultra-Slim Control to improve active noise
Headphones 10 mm Console OptoACTIVE components cancelling performance by an
width are installed in both the MR additional 10 dB.
compressed
Suite and the Control Room.