Identification of anisotropic yield functions using an information-rich tensi...vformxsteels
Yi Zhang1, António Andrade-Campos2, Sam Coppieters1
1 Department of Materials Engineering, KU Leuven
2 Department of Mechanical Engineering, University of Aveiro, 3810-193
Aveiro, Portugal
Independent Validation of Generic Specimen Design for Inverse Identification ...vformxsteels
Yi Zhanga , S. Coppietersa,*, S. Gothivarekara, A. Van de Veldea , D. Debruynea
a Department of Materials Engineering, KU Leuven, Technology Campus Ghent, 9000 Gent, Belgium
Belgium,19 March 2021
Identification of the large strain flow curve of high strength steel via the ...vformxsteels
Niels Vancraeynest1, Steven Cooreman2 and Sam Coppieters1
1Elooi lab, Department of Materials Engineering, KU Leuven
2 Applications & Solutions department, ArcelorMittal Global R&D Gent
On the topology design of an innovative heterogeneous mechanical test for mat...vformxsteels
RS 2022
On the topology design of an innovative
heterogeneous mechanical test for material
mechanical characterization
Centre for Mechanical Technology and Automation (TEMA), Department of Mechanical Engineering, University of Aveiro,
Portugal
Univ. Bretagne Sud, UMR CNRS 6027, IRDL, F-56100 Lorient, France
Mafalda Gonçalves, Sandrine Thuillier, António Andrade-Campos
Doctoral Program in Mechanical Engineering
On the comparison of heterogeneous mechanical tests for sheet metal character...vformxsteels
IDDRG 2022
M. Gonçalves, M.G. Oliveira, S. Thuillier, A. Andrade-Campos
Centre for Mechanical Technology and Automation (TEMA),
Department of Mechanical Engineering
University of Aveiro, Portugal
Univ. Bretagne Sud, UMR CNRS 6027, IRDL
F-56100 Lorient, France
1
Identification of anisotropic yield functions using an information-rich tensi...vformxsteels
Yi Zhang1, António Andrade-Campos2, Sam Coppieters1
1 Department of Materials Engineering, KU Leuven
2 Department of Mechanical Engineering, University of Aveiro, 3810-193
Aveiro, Portugal
Independent Validation of Generic Specimen Design for Inverse Identification ...vformxsteels
Yi Zhanga , S. Coppietersa,*, S. Gothivarekara, A. Van de Veldea , D. Debruynea
a Department of Materials Engineering, KU Leuven, Technology Campus Ghent, 9000 Gent, Belgium
Belgium,19 March 2021
Identification of the large strain flow curve of high strength steel via the ...vformxsteels
Niels Vancraeynest1, Steven Cooreman2 and Sam Coppieters1
1Elooi lab, Department of Materials Engineering, KU Leuven
2 Applications & Solutions department, ArcelorMittal Global R&D Gent
On the topology design of an innovative heterogeneous mechanical test for mat...vformxsteels
RS 2022
On the topology design of an innovative
heterogeneous mechanical test for material
mechanical characterization
Centre for Mechanical Technology and Automation (TEMA), Department of Mechanical Engineering, University of Aveiro,
Portugal
Univ. Bretagne Sud, UMR CNRS 6027, IRDL, F-56100 Lorient, France
Mafalda Gonçalves, Sandrine Thuillier, António Andrade-Campos
Doctoral Program in Mechanical Engineering
On the comparison of heterogeneous mechanical tests for sheet metal character...vformxsteels
IDDRG 2022
M. Gonçalves, M.G. Oliveira, S. Thuillier, A. Andrade-Campos
Centre for Mechanical Technology and Automation (TEMA),
Department of Mechanical Engineering
University of Aveiro, Portugal
Univ. Bretagne Sud, UMR CNRS 6027, IRDL
F-56100 Lorient, France
1
Process-informed material model selectionvformxsteels
ESAFORM 2023
Mariana Conde1,*, Sam Coppieters2, António Andrade-Campos1
1Department of Mechanical Engineering, TEMA - Centre for Mechanical Technology and Automation, LASI – Intelligent Systems Associate Laboratory, University of Aveiro, Portugal
2Department of Materials Engineering, KU Leuven, Belgium
*marianaconde@ua.pt
On the selection of constitutive models for realistic numerical simulationsvformxsteels
TechMA 2022
M. Conde (a), *, S. Coppieters (b), A. Andrade-Campos (a)
(a) - Centre for Mechanical Technology and Automation (TEMA), Department of Mechanical Engineering, University of Aveiro; (b) - Department of Materials Engineering, KU Leuven(a) Aveiro, Portugal; (b) – Ghent, Belgium
* – marianaconde@ua.pt
Towards virtual forming and AI Implicit material modelling using AI technique...vformxsteels
RS 2022
Rúben Lourenço
Supervisory team: A. Andrade-Campos, Pétia Georgieva
Doctoral Programme in Mechanical Engineering
TEMA – Centre for Mechanical Technology and Automation
Parameter Identification of Swift law using a FEMU-based approach and an inno...vformxsteels
ESAFORM 2022
M. Conde1, J. Henriques1,
S. Coppieters2, A. Andrade-Campos1
1 TEMA, Department of Mechanical Engineering, University of Aveiro, Portugal
2 Department of Materials Engineering, Ghent Technology Campus, KU Leuven, Belgium
Uncertainty quantification of inversely identified plastic material behavior ...vformxsteels
IDDRG 2022
M Conde1,*, S Coppieters2, A Andrade-Campos1
* marianaconde@ua.pt
1 TEMA, Department of Mechanical Engineering, University of Aveiro, Portugal
2 Department of Materials Engineering, Ghent Technology Campus, KU Leuven, Belgium
A nonlinear topology-based optimization approach for the design of a heteroge...vformxsteels
TechMA 2022
Mafalda Gonçalves, Sandrine Thuillier, António Andrade-Campos
Centre for Mechanical Technology and Automation, Department of Mechanical Engineering, University of Aveiro, Portugal
Univ. Bretagne Sud, UMR CNRS 6027, IRDL, F-56100 Lorient, France
On the design of a heterogeneous mechanical test using a nonlinear topology o...vformxsteels
ESAFORM 2022
M. Gonçalves, A. Andrade-Campos and S. Thuillier
25th International Conference on Material Forming
27-29th April 2022
Braga, Portugal
Centre for Mechanical Tecnology and Automation, Department of Mechanical Engineering, University of Aveiro, Portugal
Univ. Bretagne Sud, UMR CNRS 6027, IRDL, F-56100 Lorient, France
On the inverse identification of sheet metal mechanical behaviour using a het...vformxsteels
ESAFORM 2023
João Henriquesa,*, A. Andrade-Camposa
, J. Xavierb
aTEMA, Department of Mechanical Engineering, University of Aveiro, Campus
Universitário de Santiago, 3810-193 Aveiro, Portugal
bUNIDEMI, Department of Mechanical and Industrial Engineering, NOVA School of
Science and Technology, NOVA University Lisbon, 2825-149 Lisbon, Portugal
IDENTIFICATION OF SWIFT LAW PARAMETERS USING FEMU BY A SYNTHETIC IMAGE DIC-BA...vformxsteels
ESAFORM 2022
J. Henriquesa,*, M. Condea
, A. Andrade-Camposa
, J. Xavierb
*Corresponding author: joaodiogofh@ua.pt
aTEMA, Department of Mechanical Engineering, University of Aveiro, Campus Universitário de Santiago,
3810-193 Aveiro, Portugal
bUNIDEMI, Department of Mechanical and Industrial Engineering, NOVA School of Science and Technology,
NOVA University Lisbon, 2829-516 Caparica, Portugal
On the comparison of heterogeneous mechanical tests for sheet metal character...vformxsteels
ESAFORM 2023
M. Gonçalves, M.G. Oliveira, S. Thuillier, A. Andrade-Campos
Centre for Mechanical Technology and Automation (TEMA),
Department of Mechanical Engineering
University of Aveiro, Portugal
Univ. Bretagne Sud, UMR CNRS 6027, IRDL
F-56100 Lorient, France
The Virtual Fields Method to indirectly train ANNs for implicit constitutive ...vformxsteels
ESAFORM 2022
25th International Conference on Material Forming
R. Lourenço1,a, A. Andrade-Campos1,b, P. Georgieva2,c
1Dept. of Mechanical Engineering
Centre for Mechanical Technology and Automation, University of Aveiro, Portugal
2Dept. of Electronics Telecommunications and Informatics
Institute of Electronics and Informatics Engineering, University of Aveiro, Portugal
a
rubenl@ua.pt, bgilac@ua.pt, cpetia@ua.pt
27-29 April, Braga, Portugal
On the power of virtual experimentation in MT2.0:a VFORM-xSteels outlookvformxsteels
Sam Coppieters, A. Gil Andrade-Campos et al.
MatchID Global User Meeting
On the power of virtual experimentation in MT2.0 : a VFORM outlook
22 February2023 | Southampton, UK
On the comparison of heterogeneous mechanical tests for sheet metal character...vformxsteels
ESAFORM 2023
M. Gonçalves, M.G. Oliveira, S. Thuillier, A. Andrade-Campos 1 1,2 2 1
Centre for Mechanical Technology and Automation (TEMA),
Department of Mechanical Engineering
University of Aveiro, Portugal
Univ. Bretagne Sud, UMR CNRS 6027, IRDL
F-56100 Lorient, France
1
Uncertainty quantification of inversely identified plastic material behavior ...vformxsteels
M Conde, S Coppieters, A Andrade-Campos
TEMA, Department of Mechanical Engineering, University of Aveiro, Portugal
Department of Materials Engineering, Ghent Technology Campus, KU Leuven, Belgium
Process-informed material model selectionvformxsteels
ESAFORM 2023
Mariana Conde, Sam Coppieters, António Andrade-Campos
Department of Mechanical Engineering, TEMA - Centre for Mechanical Technology and Automation, LASI – Intelligent Systems Associate Laboratory, University of Aveiro, Portugal
Department of Materials Engineering, KU Leuven, Belgium
On the topology design of an innovative heterogeneous mechanical test for mat...vformxsteels
RS2022
Mafalda Gonçalves, Sandrine Thuillier, António Andrade-Campos
Centre for Mechanical Technology and Automation (TEMA), Department of Mechanical Engineering, University of Aveiro,
Portugal
Univ. Bretagne Sud, UMR CNRS 6027, IRDL, F-56100 Lorient, France
Mafalda Gonçalves, Sandrine Thuillier, António Andrade-Campos
1
A nonlinear topology-based optimization approach for the design of a heteroge...vformxsteels
TechMA 2022
Mafalda Gonçalves, Sandrine Thuillier, António Andrade-Campos
Centre for Mechanical Technology and Automation, Department of Mechanical Engineering, University of Aveiro, Portugal
Univ. Bretagne Sud, UMR CNRS 6027, IRDL, F-56100 Lorient, France
On the topology design of a mechanical heterogeneous specimen using geometric...vformxsteels
IDDRG 2022
M. Gonçalves, S. Thuillier, A. Andrade-Campos
Centre for Mechanical Technology and Automation (TEMA), Department of Mechanical Engineering,
University of Aveiro, Portugal
Univ. Bretagne Sud, UMR CNRS 6027, IRDL, F-56100 Lorient, France
41st International Deep Drawing Research Group Conference, 6 - 10 June 2022, Lorient, France
On the design of a heterogeneous mechanical test using a nonlinear topology o...vformxsteels
ESAFORM 2022
M. Gonçalves, A. Andrade-Campos and S. Thuillier
25th International Conference on Material Forming
27-29th April 2022
Braga, Portugal
Centre for Mechanical Tecnology and Automation, Department of Mechanical Engineering, University of Aveiro, Portugal
Univ. Bretagne Sud, UMR CNRS 6027, IRDL, F-56100 Lorient, France
Process-informed material model selectionvformxsteels
ESAFORM 2023
Mariana Conde1,*, Sam Coppieters2, António Andrade-Campos1
1Department of Mechanical Engineering, TEMA - Centre for Mechanical Technology and Automation, LASI – Intelligent Systems Associate Laboratory, University of Aveiro, Portugal
2Department of Materials Engineering, KU Leuven, Belgium
*marianaconde@ua.pt
On the selection of constitutive models for realistic numerical simulationsvformxsteels
TechMA 2022
M. Conde (a), *, S. Coppieters (b), A. Andrade-Campos (a)
(a) - Centre for Mechanical Technology and Automation (TEMA), Department of Mechanical Engineering, University of Aveiro; (b) - Department of Materials Engineering, KU Leuven(a) Aveiro, Portugal; (b) – Ghent, Belgium
* – marianaconde@ua.pt
Towards virtual forming and AI Implicit material modelling using AI technique...vformxsteels
RS 2022
Rúben Lourenço
Supervisory team: A. Andrade-Campos, Pétia Georgieva
Doctoral Programme in Mechanical Engineering
TEMA – Centre for Mechanical Technology and Automation
Parameter Identification of Swift law using a FEMU-based approach and an inno...vformxsteels
ESAFORM 2022
M. Conde1, J. Henriques1,
S. Coppieters2, A. Andrade-Campos1
1 TEMA, Department of Mechanical Engineering, University of Aveiro, Portugal
2 Department of Materials Engineering, Ghent Technology Campus, KU Leuven, Belgium
Uncertainty quantification of inversely identified plastic material behavior ...vformxsteels
IDDRG 2022
M Conde1,*, S Coppieters2, A Andrade-Campos1
* marianaconde@ua.pt
1 TEMA, Department of Mechanical Engineering, University of Aveiro, Portugal
2 Department of Materials Engineering, Ghent Technology Campus, KU Leuven, Belgium
A nonlinear topology-based optimization approach for the design of a heteroge...vformxsteels
TechMA 2022
Mafalda Gonçalves, Sandrine Thuillier, António Andrade-Campos
Centre for Mechanical Technology and Automation, Department of Mechanical Engineering, University of Aveiro, Portugal
Univ. Bretagne Sud, UMR CNRS 6027, IRDL, F-56100 Lorient, France
On the design of a heterogeneous mechanical test using a nonlinear topology o...vformxsteels
ESAFORM 2022
M. Gonçalves, A. Andrade-Campos and S. Thuillier
25th International Conference on Material Forming
27-29th April 2022
Braga, Portugal
Centre for Mechanical Tecnology and Automation, Department of Mechanical Engineering, University of Aveiro, Portugal
Univ. Bretagne Sud, UMR CNRS 6027, IRDL, F-56100 Lorient, France
On the inverse identification of sheet metal mechanical behaviour using a het...vformxsteels
ESAFORM 2023
João Henriquesa,*, A. Andrade-Camposa
, J. Xavierb
aTEMA, Department of Mechanical Engineering, University of Aveiro, Campus
Universitário de Santiago, 3810-193 Aveiro, Portugal
bUNIDEMI, Department of Mechanical and Industrial Engineering, NOVA School of
Science and Technology, NOVA University Lisbon, 2825-149 Lisbon, Portugal
IDENTIFICATION OF SWIFT LAW PARAMETERS USING FEMU BY A SYNTHETIC IMAGE DIC-BA...vformxsteels
ESAFORM 2022
J. Henriquesa,*, M. Condea
, A. Andrade-Camposa
, J. Xavierb
*Corresponding author: joaodiogofh@ua.pt
aTEMA, Department of Mechanical Engineering, University of Aveiro, Campus Universitário de Santiago,
3810-193 Aveiro, Portugal
bUNIDEMI, Department of Mechanical and Industrial Engineering, NOVA School of Science and Technology,
NOVA University Lisbon, 2829-516 Caparica, Portugal
On the comparison of heterogeneous mechanical tests for sheet metal character...vformxsteels
ESAFORM 2023
M. Gonçalves, M.G. Oliveira, S. Thuillier, A. Andrade-Campos
Centre for Mechanical Technology and Automation (TEMA),
Department of Mechanical Engineering
University of Aveiro, Portugal
Univ. Bretagne Sud, UMR CNRS 6027, IRDL
F-56100 Lorient, France
The Virtual Fields Method to indirectly train ANNs for implicit constitutive ...vformxsteels
ESAFORM 2022
25th International Conference on Material Forming
R. Lourenço1,a, A. Andrade-Campos1,b, P. Georgieva2,c
1Dept. of Mechanical Engineering
Centre for Mechanical Technology and Automation, University of Aveiro, Portugal
2Dept. of Electronics Telecommunications and Informatics
Institute of Electronics and Informatics Engineering, University of Aveiro, Portugal
a
rubenl@ua.pt, bgilac@ua.pt, cpetia@ua.pt
27-29 April, Braga, Portugal
On the power of virtual experimentation in MT2.0:a VFORM-xSteels outlookvformxsteels
Sam Coppieters, A. Gil Andrade-Campos et al.
MatchID Global User Meeting
On the power of virtual experimentation in MT2.0 : a VFORM outlook
22 February2023 | Southampton, UK
On the comparison of heterogeneous mechanical tests for sheet metal character...vformxsteels
ESAFORM 2023
M. Gonçalves, M.G. Oliveira, S. Thuillier, A. Andrade-Campos 1 1,2 2 1
Centre for Mechanical Technology and Automation (TEMA),
Department of Mechanical Engineering
University of Aveiro, Portugal
Univ. Bretagne Sud, UMR CNRS 6027, IRDL
F-56100 Lorient, France
1
Uncertainty quantification of inversely identified plastic material behavior ...vformxsteels
M Conde, S Coppieters, A Andrade-Campos
TEMA, Department of Mechanical Engineering, University of Aveiro, Portugal
Department of Materials Engineering, Ghent Technology Campus, KU Leuven, Belgium
Process-informed material model selectionvformxsteels
ESAFORM 2023
Mariana Conde, Sam Coppieters, António Andrade-Campos
Department of Mechanical Engineering, TEMA - Centre for Mechanical Technology and Automation, LASI – Intelligent Systems Associate Laboratory, University of Aveiro, Portugal
Department of Materials Engineering, KU Leuven, Belgium
On the topology design of an innovative heterogeneous mechanical test for mat...vformxsteels
RS2022
Mafalda Gonçalves, Sandrine Thuillier, António Andrade-Campos
Centre for Mechanical Technology and Automation (TEMA), Department of Mechanical Engineering, University of Aveiro,
Portugal
Univ. Bretagne Sud, UMR CNRS 6027, IRDL, F-56100 Lorient, France
Mafalda Gonçalves, Sandrine Thuillier, António Andrade-Campos
1
A nonlinear topology-based optimization approach for the design of a heteroge...vformxsteels
TechMA 2022
Mafalda Gonçalves, Sandrine Thuillier, António Andrade-Campos
Centre for Mechanical Technology and Automation, Department of Mechanical Engineering, University of Aveiro, Portugal
Univ. Bretagne Sud, UMR CNRS 6027, IRDL, F-56100 Lorient, France
On the topology design of a mechanical heterogeneous specimen using geometric...vformxsteels
IDDRG 2022
M. Gonçalves, S. Thuillier, A. Andrade-Campos
Centre for Mechanical Technology and Automation (TEMA), Department of Mechanical Engineering,
University of Aveiro, Portugal
Univ. Bretagne Sud, UMR CNRS 6027, IRDL, F-56100 Lorient, France
41st International Deep Drawing Research Group Conference, 6 - 10 June 2022, Lorient, France
On the design of a heterogeneous mechanical test using a nonlinear topology o...vformxsteels
ESAFORM 2022
M. Gonçalves, A. Andrade-Campos and S. Thuillier
25th International Conference on Material Forming
27-29th April 2022
Braga, Portugal
Centre for Mechanical Tecnology and Automation, Department of Mechanical Engineering, University of Aveiro, Portugal
Univ. Bretagne Sud, UMR CNRS 6027, IRDL, F-56100 Lorient, France