To prepare a clean, quality weld seam, it’s important to have a superior edge, and the correct preparation sequence prevents costly rework. The NorBevel-6 and NorBevel-12 range of machines and accessories are new additions to Norton’s metal fabrication solutions.
This document provides performance data for Grundfos NB, NBG, NK, and NKG pumps. It introduces expanded pump models in the 125-400 and 150-125-400 size ranges for NB/NK and NBG/NKG pumps respectively. Charts show head and flow rate curves for various models and configurations, including 2-pole, 4-pole, and 6-pole designs in cast iron and stainless steel. Dimensional sketches and specifications for base frames are also included. The document aims to supplement existing data for the NB, NK, NBG and NKG product ranges.
Use of Frequency Control to Optimize Induction Axle Scan HardeningFluxtrol Inc.
This document discusses optimization of induction hardening of axles through multi-frequency coil design and process control. Currently, axles are hardened using single or dual frequency coils in either a scanning or single shot process. The authors present a new optimized dual-turn coil design that uses variable frequency control, with higher frequency (3kHz) for initial heating and lower frequency (1kHz) for scanning, allowing for faster scanning speeds of up to 11.6mm/s while meeting hardness specifications. Computer simulation was used to optimize the coil design and heating process. The new approach provides improvements over traditional single frequency coil designs.
Sinom is a leading manufacturer for the heat exchangers.
If you are interested, please feel free to conatact us. emily@sinomgroup.com whatsapp: 0086 15081543320
Transparent bi-colour level gauges use two coloured glass filters and a light source to clearly indicate the water and steam levels in high pressure systems up to 225 bar. They have a simple design with few components that provides a long-lasting and reliable indication. The gauges are available in different sizes and connections to suit various steam applications and vessel connections.
1. Centricut consumables for the ESAB PT-36 torch last up to twice as long as OEM consumables, reducing costs and downtime. They provide exceptional cut quality and cutting speeds over their full lifetime.
2. Centricut uses Hypertherm's patented SilverLine electrode and CoolFlow nozzle technologies which optimize cooling to increase consumable life. Computational fluid dynamics shows Centricut technologies run cooler.
3. Centricut consumables are a drop-in replacement for the PT-36 torch, delivering value through longer life, quality cuts, and competitive pricing without special setup.
Glass level gauges provide direct visualization of liquid levels in vessels. They were invented in 1888 and offer advantages over electronic level indicators such as no electronic components to fail. Main components include a glass body with reflex or transparent glass, isolation valves or cocks, and optional accessories like illuminators. Models are available for a wide range of process and steam applications up to 225 bar pressure. New products include solar-powered illuminators and gauges combining glass and guided wave radar indication.
Total chain solutions - diamond cutting chains & accessories for cutting pip...Yan Mashov
High Quality Chains
SUPERIOR PERFORMANCE LASER WELDED DIAMOND CHAIN FOR:
General building materials
Firebrick/ Refractories
Reinforced concrete
Stone /Granite
Block/ Sandstone/ Abrasive materials
Coal
Building Bricks
Ductile iron/ Cast iron/ PVC/ HDPE
SPEED – 25% faster than others.
LIFE SPAN – 25% longer life span than others.
IMPROVED USER EXPERIENCE – On each link there is a segment providing smoother cutting and higher output. Diamond segment on each link providing smoother cutting, higher output and less vibration.
BULK CONCEPT – Efficient stock management solution: cut to size and repair capability.
COMPLETE KIT – Provides a compatible answer for most common chain cutting machines.
ACCESSORIES – Compatible high quality guide bars, sprockets and chain parts.
TECHNICAL SUPPORT – Direct from the manufacturer.
Hydra Solid Carbide Replaceable Head Drillsdario furlato
Dormer Interchangeable solid carbide head drills for high performance machining of steels, stainless steels and cast iron. Proven in drilling structural steel beams used in the construction industry. One of the most reliably accurate interchangeable head drills available. Fail-safe head location can be changed without ejecting the drill from the machine. Available with coolant feed across the full range and a choice of HSS bodies to support drilling to 3xD, 5xD and 8xD
This document provides performance data for Grundfos NB, NBG, NK, and NKG pumps. It introduces expanded pump models in the 125-400 and 150-125-400 size ranges for NB/NK and NBG/NKG pumps respectively. Charts show head and flow rate curves for various models and configurations, including 2-pole, 4-pole, and 6-pole designs in cast iron and stainless steel. Dimensional sketches and specifications for base frames are also included. The document aims to supplement existing data for the NB, NK, NBG and NKG product ranges.
Use of Frequency Control to Optimize Induction Axle Scan HardeningFluxtrol Inc.
This document discusses optimization of induction hardening of axles through multi-frequency coil design and process control. Currently, axles are hardened using single or dual frequency coils in either a scanning or single shot process. The authors present a new optimized dual-turn coil design that uses variable frequency control, with higher frequency (3kHz) for initial heating and lower frequency (1kHz) for scanning, allowing for faster scanning speeds of up to 11.6mm/s while meeting hardness specifications. Computer simulation was used to optimize the coil design and heating process. The new approach provides improvements over traditional single frequency coil designs.
Sinom is a leading manufacturer for the heat exchangers.
If you are interested, please feel free to conatact us. emily@sinomgroup.com whatsapp: 0086 15081543320
Transparent bi-colour level gauges use two coloured glass filters and a light source to clearly indicate the water and steam levels in high pressure systems up to 225 bar. They have a simple design with few components that provides a long-lasting and reliable indication. The gauges are available in different sizes and connections to suit various steam applications and vessel connections.
1. Centricut consumables for the ESAB PT-36 torch last up to twice as long as OEM consumables, reducing costs and downtime. They provide exceptional cut quality and cutting speeds over their full lifetime.
2. Centricut uses Hypertherm's patented SilverLine electrode and CoolFlow nozzle technologies which optimize cooling to increase consumable life. Computational fluid dynamics shows Centricut technologies run cooler.
3. Centricut consumables are a drop-in replacement for the PT-36 torch, delivering value through longer life, quality cuts, and competitive pricing without special setup.
Glass level gauges provide direct visualization of liquid levels in vessels. They were invented in 1888 and offer advantages over electronic level indicators such as no electronic components to fail. Main components include a glass body with reflex or transparent glass, isolation valves or cocks, and optional accessories like illuminators. Models are available for a wide range of process and steam applications up to 225 bar pressure. New products include solar-powered illuminators and gauges combining glass and guided wave radar indication.
Total chain solutions - diamond cutting chains & accessories for cutting pip...Yan Mashov
High Quality Chains
SUPERIOR PERFORMANCE LASER WELDED DIAMOND CHAIN FOR:
General building materials
Firebrick/ Refractories
Reinforced concrete
Stone /Granite
Block/ Sandstone/ Abrasive materials
Coal
Building Bricks
Ductile iron/ Cast iron/ PVC/ HDPE
SPEED – 25% faster than others.
LIFE SPAN – 25% longer life span than others.
IMPROVED USER EXPERIENCE – On each link there is a segment providing smoother cutting and higher output. Diamond segment on each link providing smoother cutting, higher output and less vibration.
BULK CONCEPT – Efficient stock management solution: cut to size and repair capability.
COMPLETE KIT – Provides a compatible answer for most common chain cutting machines.
ACCESSORIES – Compatible high quality guide bars, sprockets and chain parts.
TECHNICAL SUPPORT – Direct from the manufacturer.
Hydra Solid Carbide Replaceable Head Drillsdario furlato
Dormer Interchangeable solid carbide head drills for high performance machining of steels, stainless steels and cast iron. Proven in drilling structural steel beams used in the construction industry. One of the most reliably accurate interchangeable head drills available. Fail-safe head location can be changed without ejecting the drill from the machine. Available with coolant feed across the full range and a choice of HSS bodies to support drilling to 3xD, 5xD and 8xD
Case ih 1200 and early riser series planters service repair manualfjjskekdmem
This document is a repair manual for 1200 and Early Riser series planters. It contains 18 books that cover hydraulic, electrical, and electronic systems for different planter models. Each book has a publication number and covers a specific system. The manual provides instructions on inspecting and testing electrical connectors, as well as guidelines for measuring voltage and resistance. It also includes tables with torque specifications for hydraulic fittings and fasteners.
Case ih 1200 and early riser series planters service repair manualufjskefsmekm
This document provides an introduction and instructions for repairing 1200 and Early Riser series planters. It includes torque specifications for hydraulic tubes and fittings, fasteners, and electrical connector inspection procedures. The document is divided into 18 books that cover hydraulic, electrical, and electronic systems for different planter models. Books can be ordered separately or as a complete repair manual set.
This document provides contact information for various departments of a company, including their customer service department, tool repair center, and sales representatives. It also includes tables listing product codes, specifications, and torque values for a range of connectors, terminals, and clamps for connecting copper, aluminum and steel cables.
This document provides information on the launch of a new rotary rack and pinion actuator product. Key details include:
- The actuator uses a dual rack and pinion design and is available in double acting and single acting models.
- Materials include extruded aluminum bodies and pinions that are hard anodized for strength and corrosion protection.
- It can provide up to 1900 Nm of torque at 8 bar pressure and operate from -40°C to 180°C.
- Features include stroke adjustment, ISO 5211 mounting interfaces, and a lifetime of 1 million cycles.
This document provides information on lead screws and supernuts from Ball Screws and Actuators. It discusses the features and advantages of lead screws such as being low cost, customizable, available in a variety of sizes, and resistant to corrosion. It provides charts with information on material properties, temperature limits, critical speeds, and column loading capacities. It also notes that standard grade lead screws have a lead accuracy of 0.010 in/ft while precision grade are 0.003 in/ft and lists length limitations for different sized lead screws.
This document provides information on lead screws and supernuts from Ball Screws and Actuators. It discusses the features, advantages, design considerations and material properties of lead screws. Key points include that lead screws offer cost savings compared to ball screws, come in a variety of leads and diameters, and use stainless steel and internally lubricated acetal plastic for non-corrosive operation. Standard and precision grades are available with lead accuracies of 0.010 in/ft and 0.003 in/ft respectively. Load and temperature limits vary based on the specific assembly. Custom options are available to meet unique specifications.
This document provides information on gas cutting equipment from The Harris Products Group. It includes specifications and part numbers for various oxy-fuel cutting torches and tips for different industries. It also describes an iron powder starter kit for cutting stainless steel and other difficult metals, including the torch, dispenser, hoses and regulators included. The document advertises solutions for fabricators, demolition, foundries, scrap and recycling customers.
The document is a service manual for the MCD360 3-way electronic crossover. It includes exploded views of the crossover components, schematics, parts lists, and specifications. The manual provides technicians with the information needed to service and repair the MCD360 crossover.
GZ Industrial Supplies is a Nigerian company that distributes industrial supplies and tools, including Dewalt power tools. It carries a wide range of Dewalt products like drills, saws, sanders, and accessories. Dewalt tools are known for their durability, power, and reliability. GZ Industrial Supplies has several office locations across Nigeria to effectively distribute Dewalt and other industrial products to customers.
The document summarizes the Agitator NEO Coiled Tubing tool, which features an improved design to reduce friction and buckling in coiled tubing operations. It has a shorter length and redesigned power section and valves that allow for higher flow rates and pressures. The tool produces vibrations along the coiled tubing to increase weight on bit and rate of penetration while reaching total depth. It comes in three sizes, has variable pressure pulses proportional to flow rate, and benefits operations by extending reach and delaying buckling.
This document provides specifications for several submersible grinder pump models from Jung Pumpen, a German manufacturer of sewage and wastewater pumps. It describes the key features and performance characteristics of the G2D, G3D, G5D, and G7D series pumps, including their maximum head pressure, flow rates, motor details, materials, and dimensions. The document emphasizes the pumps' ability to handle solids through their advanced cutting systems and vortex impellers.
This document provides specifications and performance data for Pacific Scientific PowerMax II stepper motors and motor systems. It includes:
- Tables listing motor model numbers, ratings, and characteristics such as torque, current, resistance, and weight.
- Diagrams of standard shaft options and flying lead/connector lengths for various motor models.
- Curves showing torque-speed performance when using different PowerMax II stepper motors and microstepping drives in 24V, 36V and 72V systems.
- Information on 6210/6215 and 6410/6415 microstepping drives that are compatible with PowerMax II motors.
The document provides specifications, diagrams and performance data for selecting the appropriate
The document describes a high precision electroplated grinding wheel called AEON designed for gear shaft groove grinding applications. AEON wheels have a single abrasive layer fixed to the core through electrochemical nickel deposition, providing high grit retention. The core can be re-plated with new abrasive grains multiple times, saving costs. AEON offers improved performance over competitor wheels, with a 50% increase in efficiency, lifetime, and number of re-platings possible. It achieves outstanding tool life, highest accuracy, and perfect profile stability throughout its lifetime within a precision of +/- 5 μm for maximum sized wheels weighing 250 kg.
The document describes Winter AEON electroplated grinding wheels designed for high precision gear shaft groove grinding applications. AEON wheels have a single abrasive layer fixed to the core through electrochemical nickel deposition, providing high grit retention. The core can be re-plated with new abrasive grains multiple times, reducing costs. AEON wheels offer a 50% increase in efficiency and lifetime compared to previous solutions. They achieve outstanding tool life, highest accuracy, and perfect profile stability throughout their lifetime.
The document describes Winter AEON electroplated grinding wheels designed for high precision gear shaft groove grinding applications. AEON wheels have a single abrasive layer fixed to the core through electrochemical nickel deposition, providing high grit retention. The core can be re-plated with new abrasive grains multiple times, reducing costs. Testing showed the new AEON wheel specification achieved 56,000 parts, a significant increase over previous Winter and competitor wheel specifications. AEON wheels are customized for each customer and designed to deliver the highest performance through improved wear resistance, tool life, accuracy, and profile stability.
Case ih 1200 and early riser series planters service repair manualfjjskekdmem
This document is a repair manual for 1200 and Early Riser series planters. It contains 18 books that cover hydraulic, electrical, and electronic systems for different planter models. Each book has a publication number and covers a specific system. The manual provides instructions on inspecting and testing electrical connectors, as well as guidelines for measuring voltage and resistance. It also includes tables with torque specifications for hydraulic fittings and fasteners.
Case ih 1200 and early riser series planters service repair manualufjskefsmekm
This document provides an introduction and instructions for repairing 1200 and Early Riser series planters. It includes torque specifications for hydraulic tubes and fittings, fasteners, and electrical connector inspection procedures. The document is divided into 18 books that cover hydraulic, electrical, and electronic systems for different planter models. Books can be ordered separately or as a complete repair manual set.
This document provides contact information for various departments of a company, including their customer service department, tool repair center, and sales representatives. It also includes tables listing product codes, specifications, and torque values for a range of connectors, terminals, and clamps for connecting copper, aluminum and steel cables.
This document provides information on the launch of a new rotary rack and pinion actuator product. Key details include:
- The actuator uses a dual rack and pinion design and is available in double acting and single acting models.
- Materials include extruded aluminum bodies and pinions that are hard anodized for strength and corrosion protection.
- It can provide up to 1900 Nm of torque at 8 bar pressure and operate from -40°C to 180°C.
- Features include stroke adjustment, ISO 5211 mounting interfaces, and a lifetime of 1 million cycles.
This document provides information on lead screws and supernuts from Ball Screws and Actuators. It discusses the features and advantages of lead screws such as being low cost, customizable, available in a variety of sizes, and resistant to corrosion. It provides charts with information on material properties, temperature limits, critical speeds, and column loading capacities. It also notes that standard grade lead screws have a lead accuracy of 0.010 in/ft while precision grade are 0.003 in/ft and lists length limitations for different sized lead screws.
This document provides information on lead screws and supernuts from Ball Screws and Actuators. It discusses the features, advantages, design considerations and material properties of lead screws. Key points include that lead screws offer cost savings compared to ball screws, come in a variety of leads and diameters, and use stainless steel and internally lubricated acetal plastic for non-corrosive operation. Standard and precision grades are available with lead accuracies of 0.010 in/ft and 0.003 in/ft respectively. Load and temperature limits vary based on the specific assembly. Custom options are available to meet unique specifications.
This document provides information on gas cutting equipment from The Harris Products Group. It includes specifications and part numbers for various oxy-fuel cutting torches and tips for different industries. It also describes an iron powder starter kit for cutting stainless steel and other difficult metals, including the torch, dispenser, hoses and regulators included. The document advertises solutions for fabricators, demolition, foundries, scrap and recycling customers.
The document is a service manual for the MCD360 3-way electronic crossover. It includes exploded views of the crossover components, schematics, parts lists, and specifications. The manual provides technicians with the information needed to service and repair the MCD360 crossover.
GZ Industrial Supplies is a Nigerian company that distributes industrial supplies and tools, including Dewalt power tools. It carries a wide range of Dewalt products like drills, saws, sanders, and accessories. Dewalt tools are known for their durability, power, and reliability. GZ Industrial Supplies has several office locations across Nigeria to effectively distribute Dewalt and other industrial products to customers.
The document summarizes the Agitator NEO Coiled Tubing tool, which features an improved design to reduce friction and buckling in coiled tubing operations. It has a shorter length and redesigned power section and valves that allow for higher flow rates and pressures. The tool produces vibrations along the coiled tubing to increase weight on bit and rate of penetration while reaching total depth. It comes in three sizes, has variable pressure pulses proportional to flow rate, and benefits operations by extending reach and delaying buckling.
This document provides specifications for several submersible grinder pump models from Jung Pumpen, a German manufacturer of sewage and wastewater pumps. It describes the key features and performance characteristics of the G2D, G3D, G5D, and G7D series pumps, including their maximum head pressure, flow rates, motor details, materials, and dimensions. The document emphasizes the pumps' ability to handle solids through their advanced cutting systems and vortex impellers.
This document provides specifications and performance data for Pacific Scientific PowerMax II stepper motors and motor systems. It includes:
- Tables listing motor model numbers, ratings, and characteristics such as torque, current, resistance, and weight.
- Diagrams of standard shaft options and flying lead/connector lengths for various motor models.
- Curves showing torque-speed performance when using different PowerMax II stepper motors and microstepping drives in 24V, 36V and 72V systems.
- Information on 6210/6215 and 6410/6415 microstepping drives that are compatible with PowerMax II motors.
The document provides specifications, diagrams and performance data for selecting the appropriate
The document describes a high precision electroplated grinding wheel called AEON designed for gear shaft groove grinding applications. AEON wheels have a single abrasive layer fixed to the core through electrochemical nickel deposition, providing high grit retention. The core can be re-plated with new abrasive grains multiple times, saving costs. AEON offers improved performance over competitor wheels, with a 50% increase in efficiency, lifetime, and number of re-platings possible. It achieves outstanding tool life, highest accuracy, and perfect profile stability throughout its lifetime within a precision of +/- 5 μm for maximum sized wheels weighing 250 kg.
The document describes Winter AEON electroplated grinding wheels designed for high precision gear shaft groove grinding applications. AEON wheels have a single abrasive layer fixed to the core through electrochemical nickel deposition, providing high grit retention. The core can be re-plated with new abrasive grains multiple times, reducing costs. AEON wheels offer a 50% increase in efficiency and lifetime compared to previous solutions. They achieve outstanding tool life, highest accuracy, and perfect profile stability throughout their lifetime.
The document describes Winter AEON electroplated grinding wheels designed for high precision gear shaft groove grinding applications. AEON wheels have a single abrasive layer fixed to the core through electrochemical nickel deposition, providing high grit retention. The core can be re-plated with new abrasive grains multiple times, reducing costs. Testing showed the new AEON wheel specification achieved 56,000 parts, a significant increase over previous Winter and competitor wheel specifications. AEON wheels are customized for each customer and designed to deliver the highest performance through improved wear resistance, tool life, accuracy, and profile stability.
The document describes Winter AEON electroplated grinding wheels designed for high precision gear shaft groove grinding applications. AEON wheels have a single abrasive layer fixed to the core through electrochemical nickel deposition, providing high grit retention. The core can be re-plated with new abrasive grains multiple times, reducing costs. Testing showed AEON wheels achieved 56,000 parts before replacement, a 50% improvement over previous wheels. AEON wheels offer customized solutions optimized for customers' processes, with improvements to efficiency, lifetime, and precision profile stability.
Norton Cyclonic is a new concept with a complete system of products colour coded by application steps for quick and easy selection in a busy body shop.
The document describes Norton's Cyclonic sanding system, which consists of four color-coded sanding steps to efficiently achieve a perfect surface finish. The Cyclonic system uses laser-cut discs and rolls that are flatter for closer sanding and improved dust extraction. The color-coding and included accessories provide a simple solution for consistent sanding results.
Norton Cyclonic is a new concept with a complete system of products colour coded by application steps for quick and easy selection in a busy body shop.
Norton Cyclonic is a new concept with a complete system of products colour coded by application steps for quick and easy selection in a busy body shop.
Norton Cyclonic is a new concept with a complete system of products colour coded by application steps for quick and easy selection in a busy body shop.
The document describes Norton's Cyclonic sanding system, which consists of four color-coded sanding steps to efficiently achieve a perfect surface finish. The Cyclonic system uses laser-cut discs and rolls that are flatter for closer sanding and improved dust extraction. The color-coding and included accessories provide a simple solution for consistent sanding results.
Norton Cyclonic is a new concept with a complete system of products colour coded by application steps for quick and easy selection in a busy body shop.
The document describes Norton's Cyclonic sanding system, which uses color-coded discs and rolls to simplify the sanding process. The system allows users to achieve a perfect surface finish in just four sanding steps. Norton's Cyclonic technology improves dust extraction by 25% compared to traditional sanding discs, increasing productivity. The laser-cut holes and specialized backing on the discs also provide more consistent sanding results.
2. 02
NORTON BEVELSYSTEMS
New Norton NorBevel-6 and NorBevel-12 machines are a revolution
in bevelling and rounding metal!
Norton now offers two new machine ranges, compact and ergonomic,
electric and the pneumatic to make bevelling and rounding metal
easier, faster, more accurate and more cost effective. The NorBevel
concept has been designed for heavy-duty bevelling and radius work,
bevelling up to a depth of 12 mm.
BETTER WORKING CONDITIONS
Lightweight and almost vibration-free. The chips are large
enough to immediately drop to the ground. No hazardous
dust particles and/or combustion gases are released.
A MORE CONSISTENT AND ACCURATE ANGLE
NorBevel-6 and NorBevel-12 machines provide a more
consistent and accurate angle to the metal for a stronger
welded joint.
A MACHINE QUALITY FINISH WITHOUT CONTAMINATION
A better quality weld joint is created through reduced
encapsulation of impurities in the weld, as NorBevel does
not contaminate the metal.
SPEED AND FLEXIBILITY
Approximately 1.2m of bevelling can be done in one
minute. In a matter of seconds the machine can be
adjusted and the bevel heads replaced.
NO FINISHING AND NO DISCOLORATION
A perfect end result straight away, without finishing.
Discoloration is prevented through reduced-sparking that
adds hardly any heat to the material.
UNIFORM QUALITY
A larger bonding surface is created for paint and coatings
due to the uniform radius. Cable feed glands are no
longer required to prevent chafing when feeding through
cables, wiring and/or piping.
A QUALITY FINISH
Only with NorBevel you can quickly achieve high levels
of constant quality when rounding metal.
SPEED AND FLEXIBILITY
Rounding small openings from a diameter of 18 mm is
easy due to the compact and lightweight machine design.
Rounding metal now has an unprecedented degree
of flexibility.
FOR BEVELLING, NORBEVEL PROVIDES:
FOR ROUNDING, NORBEVEL PROVIDES:
3. 03
THE NORTON NORBEVEL-12 RANGE
The NorBevel 12 models have been designed for heavy duty bevelling and radius work,
bevelling up to a depth of 12 mm. Both the EBA-12 and ABA-12 models have powerful motors,
adjustable heads for adapting bevelling depth, and come in a convenient travel case with
adaptor. The electric version, EBA-12 has a variable speed switch for greater control.
NORBEVEL EBA-12 ELECTRIC
NORBEVEL-12 ELECTRIC (EBA-12)
Part no. 66261107700
Motor Electric
Max. bevel depth 12 mm
Bevel radius R2, R3, R4, R5, R6, R8
Bevel angle 15°- 22,5°- 30°- 37,5°- 45°- 60
Air pressure -
Air consumption -
Power 1.53kw
Voltage 230 V / 120 V
Speed 10.500 rpm
Weight 4,5 kg
Min. pipe/opening
diameter
41 mm
NORBEVEL ABA-12 PNEUMATIC
NORBEVEL-12 PNEUMATIC (ABA-12)
Part no. 66261107706
Motor Pneumatic
Max. bevel depth 12 mm
Bevel radius R2, R3, R4, R5, R6, R8
Bevel angle 15°- 22,5°- 30°- 37,5°- 45°- 60
Air pressure 6 bar
Air consumption 1100 ltr / min
Power 2 PK / 1,48kw
Voltage -
Speed 10.000 rpm
Weight 5,66 kg
Min. pipe/opening
diameter
41 mm
Bevel head with depth
adjustment
Variable speed setting Supplied in a
convenient case
Bevel head with depth
adjustment
Safety lever Supplied in a
convenient case
4. 04
Premium heads for Plasma / Laser-cut steel and Stainless steel
Part Number Radius Max depth Pk qty
66261136479 R2
8mm
1
66261136480 R3 1
66261146202 R4 1
66261152485* R5 1
66261152487* R6 1
66261152489* R8 1
Part Number Angle Max depth Pk qty
66261146203 15°
8mm
1
66261146204* 22,5° 1
66261146205 30° 1
66261146206* 37,5° 1
66261136503 45° 1
66261146207* 52,5° 1
66261146209* 60° 1
Part Number Angle Max depth Pk qty
66261146210 15°
12mm
1
66261146211* 22,5° 1
66261146212 30° 1
66261146215* 37,5° 1
66261146216 45° 1
66261146219* 52,5° 1
66261146220* 60° 1
Steel
Part Number Radius Max depth Pk qty
66261107707 R2
8mm
1
66261107799 R3 1
66261107801 R4 1
Part Number Angle Max depth Pk qty
66261107802 15°
8mm
1
66261107804* 22,5° 1
66261107805 30° 1
66261107806* 37,5° 1
66261107809 45° 1
66261146142* 52,5° 1
66261107811* 60° 1
Part Number Radius Max depth Pk qty
66261107812 15°
12mm
1
66261107840* 22,5° 1
66261107841 30° 1
66261107843* 37,5° 1
66261107844 45° 1
66261146144* 52,5° 1
66261107845* 60° 1
HEADS FOR NORBEVEL-12
(ELECTRIC AND PNEUMATIC)
* MTO item
* MTO item
Aluminium, plastic, brass and all soft metals
Part Number Radius Max depth Pk qty
66261113318 R2
8mm
1
66261113319 R3 1
66261113320 R4 1
66261152479 R5 1
66261152482 R6 1
66261152484 R8 1
Part Number Angle Max depth Pk qty
66261146151* 15°
8mm
1
66261146162* 22,5° 1
66261113321 30° 1
66261146164* 37,5° 1
66261113323 45° 1
66261146165* 52,5° 1
66261146166* 60° 1
Part Number Radius Max depth Pk qty
66261146167* 15°
12mm
1
66261146168* 22,5° 1
66261146169 30° 1
66261146170* 37,5° 1
66261146171 45° 1
66261146172* 52,5° 1
66261146173* 60° 1
* MTO item
Recommended maximum
cut depth is 4mm per pass.
Replace the cutting
head in seconds!
5. 05
THE NORTON NORBEVEL-6 RANGE
For lighter bevelling and rounding to a depth of 6 mm, the NorBevel-6 machines are compact,
maneuverable, and available in two super light weight models, with electric and pneumatic
motors. The Premium version can be used for more precise depth adjustment of 0.1 mm.
Spindle lock for a lighter and quicker change of NorBevel heads, only one allen key is
required.
NORBEVEL EBI-6 ELECTRIC PREMIUM
NORBEVEL-6 ELECTRIC (EBI-06) Premium
Part no. 66261126777
Motor Electric
Max. bevel depth 6 mm
Bevel radius R2, R3, R4
Bevel angle 15°- 22,5°- 30°- 37,5°- 45°- 60
Air pressure -
Air consumption -
Power 500 W
Voltage 230 V / 120 V
Speed 11.000 rpm
Weight 2,0 kg
Min. pipe/opening
diameter
22 mm
NORBEVEL EBI-6 ELECTRIC
NORBEVEL-6 ELECTRIC (EBI-06)
Part no. 66261107846
Motor Electric
Max. bevel depth 6 mm
Bevel radius R2, R3, R4
Bevel angle 15°- 22,5°- 30°- 37,5°- 45°- 60
Air pressure -
Air consumption -
Power 500 W
Voltage 230 V / 120 V
Speed 11.000 rpm
Weight 1,6 kg
Min. pipe/opening
diameter
22 mm
Variable speed
settings
Supplied in a
convenient case
Easy to adjust cutting
depth
Variable speed
settings
Supplied in a
convenient case
Easy to use
BEST
GOOD
6. 06
NORBEVEL ABIS-6 PNEUMATIC PREMIUM
NORBEVEL-6 PNEUMATIC (ABIS-06) Premium
Part no. 66261129888
Motor Pneumatic
Max. bevel depth 6 mm
Bevel radius R2, R3, R4
Bevel angle 15°- 22,5°- 30°- 37,5°- 45°- 60
Air pressure 6 bar
Air consumption 310 ltr / min
Power 8 PK / 0.38 kw
Voltage -
Speed 25.000 rpm
Weight 1,1 kg
Min. pipe/opening
diameter
22 mm
NORBEVEL EBI-6 PNEUMATIC
NORBEVEL-6 PNEUMATIC (ABIS-06)
Part no. 66261107847
Motor Pneumatic
Max. bevel depth 6 mm
Bevel radius R2, R3, R4
Bevel angle 15°- 22,5°- 30°- 37,5°- 45°- 60
Air pressure 6 bar
Air consumption 310 ltr / min
Power 8 PK / 0.38 kw
Voltage -
Speed 25.000 rpm
Weight 0.8 kg
Min. pipe/opening
diameter
22 mm
Safety lever Supplied in a
convenient case
Easy to adjust cutting
depth and replace
cutting head
Safety lever Supplied in a
convenient case
Easy to use
BEST
GOOD
7. 07
HEADS FOR NORBEVEL-6
Premium heads for Plasma / Laser-cut steel and Stainless steel
Part Number Radius Max depth Pk qty
66261136486 R2
6mm
1
66261136502 R3 1
66261146174 R4 1
Part Number Angle Max depth Pk qty
66261146175 15°
6mm
1
66261146178* 22,5° 1
66261146179 30° 1
66261146180* 37,5° 1
66261136504 45° 1
66261146181* 52,5° 1
66261146182* 60° 1
Steel
Part Number Radius Max depth Pk qty
66261107851 R2
6mm
1
66261107852 R3 1
66261107853 R4 1
Part Number Angle Max depth Pk qty
66261107854 15°
6mm
1
66261107855* 22,5° 1
66261107856 30° 1
66261107857* 37,5° 1
66261107858 45° 1
66261146141* 52,5° 1
66261107859* 60° 1
* MTO item * MTO item
Aluminium, plastic, brass and all soft metals
Part Number Radius Max depth Pk qty
66261113306 R2
6mm
1
66261113309 R3 1
66261113310 R4 1
Part Number Angle Max depth Pk qty
66261146145* 15°
6mm
1
66261146146* 22,5° 1
66261113311 30° 1
66261146147* 37,5° 1
66261113312 45° 1
66261146149* 52,5° 1
66261146150* 60° 1
* MTO item
Recommended maximum
cut depth is 4mm per pass.
Replace the cutting
head in seconds!
8. Norton is a registered trademark of Saint-Gobain Abrasives.
Form # 3208
Saint-Gobain Abrasifs
European Headquarters
Rue de l’Ambassadeur - B.P.8
78 702 Conflans Cedex
France
Tel: +33 (0)1 34 90 40 00
Fax: +33 (0)1 39 19 89 56
www.nortonabrasives.com