This document is the service manual for the A-Ergo model of stand-on stacker trucks made by ATLET. It provides information on the general structure and content of the manual. It also lists important safety instructions that must be followed when working on the trucks, such as ensuring the mast is locked out, removing jewelry, and properly lifting and securing the truck before beginning any repairs.
Nissan forklift o frame -opc series service repair manualfujsjefjkskekfm
This document is a service manual for ATLET picking trucks in the OP series. It provides general technical data and specifications for components such as the drive motor, gearbox, hydraulic system, control system, and fuses. Dimensions and diagrams are also included to show the overview of the motor compartment and identify major components. The manual instructs technicians on how to safely service the trucks and properly handle components.
Nissan forklift electric p01 series service repair manualfusjjefjkskemem
This document provides an introduction and overview of a service manual for Nissan forklifts models P01 and P02. It includes sections on how to use the manual, identification information, general precautions for maintenance and repair, and specifications for tightening standard bolts. The manual consists of 14 sections covering various systems of the forklift and how to service parts. Technical bulletins may be included with the manual to provide updates.
Nissan forklift p frame - psd series service repair manualudfjjsjekkemm
This document is a service manual for ATLET low lifters and stackers. It provides general safety instructions for working on the vehicles, including ensuring the drive wheel is lifted and mast is locked before working. It outlines the structure of the manual, with sections covering specific subsystems, and technical data on the truck models. Recommended lubricants and consumables are listed.
Nissan forklift o frame -opc series service repair manualfjjskekksemmrt
This document is a service manual for ATLET picking trucks in the OP series. It provides general information and technical data about the trucks. Some key points covered include:
- How to use the manual and find relevant information for specific problems or procedures.
- Important changes that have been made to OP models over time that should be considered during service.
- Approved lifting points on the trucks when lifting for service or with a jack.
- Important safety instructions that must be followed when working on the trucks, such as securing the truck, disconnecting the battery, and preventing unintended movement.
- General safety risks associated with working on fork trucks and the precautions that should be taken regarding fire,
Nissan forklift o frame - oph series service repair manualfjsefkskekmm
This document is a service manual for ATLET picking trucks in the OP series. It provides general technical data and specifications for components such as the drive motor, gearbox, hydraulic system, hydraulic unit, and control system. It also includes dimensions, weights, lubrication charts, and other reference information to assist with servicing the trucks. Safety instructions are provided, and an overview of the motor compartment shows the layout of key components.
Nissan forklift o frame -opc series service repair manualfjufksefmme
This document is a service manual for ATLET picking trucks in the OP series. It provides general technical data and specifications for components such as the drive motor, gearbox, hydraulic system, control system, and fuses. Dimensions and diagrams are also included to show the overview of the motor compartment and identify major components. The manual instructs technicians on how to safely service the trucks and properly handle components.
Nissan forklift o frame - ops -opm series service repair manualfjkekfmefmm
This document is a service manual for ATLET picking trucks in the OP series. It provides general technical data and specifications for components such as the drive motor, gearbox, hydraulic system, hydraulic unit, and control system. It also includes dimensions, weights, lubrication charts, and other reference information to assist with servicing the trucks.
Nissan forklift o frame - oph series service repair manualfusjejfjsekfkem
This document is a service manual for ATLET picking trucks in the OP series. It provides general technical data and specifications for components such as the drive motor, gearbox, hydraulic system, control system, and fuses. Dimensions and diagrams are also included to show the overview of the motor compartment and identify major components. The manual instructs technicians on how to safely service the trucks and properly handle components.
Nissan forklift o frame -opc series service repair manualfujsjefjkskekfm
This document is a service manual for ATLET picking trucks in the OP series. It provides general technical data and specifications for components such as the drive motor, gearbox, hydraulic system, control system, and fuses. Dimensions and diagrams are also included to show the overview of the motor compartment and identify major components. The manual instructs technicians on how to safely service the trucks and properly handle components.
Nissan forklift electric p01 series service repair manualfusjjefjkskemem
This document provides an introduction and overview of a service manual for Nissan forklifts models P01 and P02. It includes sections on how to use the manual, identification information, general precautions for maintenance and repair, and specifications for tightening standard bolts. The manual consists of 14 sections covering various systems of the forklift and how to service parts. Technical bulletins may be included with the manual to provide updates.
Nissan forklift p frame - psd series service repair manualudfjjsjekkemm
This document is a service manual for ATLET low lifters and stackers. It provides general safety instructions for working on the vehicles, including ensuring the drive wheel is lifted and mast is locked before working. It outlines the structure of the manual, with sections covering specific subsystems, and technical data on the truck models. Recommended lubricants and consumables are listed.
Nissan forklift o frame -opc series service repair manualfjjskekksemmrt
This document is a service manual for ATLET picking trucks in the OP series. It provides general information and technical data about the trucks. Some key points covered include:
- How to use the manual and find relevant information for specific problems or procedures.
- Important changes that have been made to OP models over time that should be considered during service.
- Approved lifting points on the trucks when lifting for service or with a jack.
- Important safety instructions that must be followed when working on the trucks, such as securing the truck, disconnecting the battery, and preventing unintended movement.
- General safety risks associated with working on fork trucks and the precautions that should be taken regarding fire,
Nissan forklift o frame - oph series service repair manualfjsefkskekmm
This document is a service manual for ATLET picking trucks in the OP series. It provides general technical data and specifications for components such as the drive motor, gearbox, hydraulic system, hydraulic unit, and control system. It also includes dimensions, weights, lubrication charts, and other reference information to assist with servicing the trucks. Safety instructions are provided, and an overview of the motor compartment shows the layout of key components.
Nissan forklift o frame -opc series service repair manualfjufksefmme
This document is a service manual for ATLET picking trucks in the OP series. It provides general technical data and specifications for components such as the drive motor, gearbox, hydraulic system, control system, and fuses. Dimensions and diagrams are also included to show the overview of the motor compartment and identify major components. The manual instructs technicians on how to safely service the trucks and properly handle components.
Nissan forklift o frame - ops -opm series service repair manualfjkekfmefmm
This document is a service manual for ATLET picking trucks in the OP series. It provides general technical data and specifications for components such as the drive motor, gearbox, hydraulic system, hydraulic unit, and control system. It also includes dimensions, weights, lubrication charts, and other reference information to assist with servicing the trucks.
Nissan forklift o frame - oph series service repair manualfusjejfjsekfkem
This document is a service manual for ATLET picking trucks in the OP series. It provides general technical data and specifications for components such as the drive motor, gearbox, hydraulic system, control system, and fuses. Dimensions and diagrams are also included to show the overview of the motor compartment and identify major components. The manual instructs technicians on how to safely service the trucks and properly handle components.
The document appears to be a parts list for a Massey Ferguson MF 374 VQ cab tractor from 1995. It contains over 60 items with part numbers, descriptions, quantities and other details. The list is broken into sections for the engine assembly, short engine, cylinder block, crankshaft/pistons/connecting rods, and cylinder head. It provides extensive technical specifications and part replacement information for maintenance and repair of the tractor engine.
Massey ferguson mf 374 aq cab tractor parts catalogue manualfjskkdmmmse
This document contains parts listings and technical specifications for components of a Massey Ferguson MF 374 AQ cab tractor, including the engine. It lists over 60 individual parts that make up the engine assembly, cylinder block, crankshaft, pistons, connecting rods, and cylinder head. Each part is identified by number, part name, quantity used, and other identifying information or installation notes. The document provides detailed reference information for mechanics or others servicing or repairing the tractor.
This document contains parts lists and descriptions for an MF 364 VQ tractor engine. It includes sections for the engine assembly, short engine, cylinder block, crankshaft and connecting rods, cylinder head, and other engine parts. Each section lists the part numbers, quantities, descriptions, and other details for the components of that engine system.
Massey ferguson mf 364 fq cab tractor parts catalogue manualfjskkdmmmse
This document provides parts information for the engine of a Massey Ferguson 364 FQ cab tractor. It contains listings of engine parts with part numbers, quantities, descriptions, and additional information. The parts are grouped into sections for the engine assembly, short engine, cylinder block, crankshaft/pistons/connecting rods, and cylinder head. Each item includes the part number, quantity, a description, and sometimes additional notes or specifications.
Massey ferguson mf 364 aq cab tractor parts catalogue manualfjskkdmmmse
This document contains parts lists and technical specifications for components of a Massey Ferguson MF 364 AQ CAB tractor engine. It includes lists of parts for the engine assembly, short engine, cylinder block, crankshaft, pistons and connecting rods, and cylinder head. Each item listed includes the part number, quantity, description, and additional comments as needed. The purpose is to provide detailed reference information for maintenance and repair of this tractor engine.
Massey ferguson mf 354 sq cab tractor parts catalogue manualfjskkdmmmse
This document contains parts listings and technical specifications for a Massey Ferguson MF 354 SQ CAB tractor with an AD3.152 engine. It includes lists of parts for the engine assembly, short engine, cylinder block, crankshaft, pistons and connecting rods, and cylinder head. Each item lists the part number, quantity, description, and additional comments. Specifications like serial numbers, tooth counts, and thickness measurements are provided for some parts. The document contains detailed reference information for repair and ordering replacement parts for this tractor model and engine.
Kubota kx151 excavator parts catalogue manualfjskkdmmmse
The document provides instructions and definitions for parts books. It explains that the heading on parts pages will match the picture page. It defines the column headings for part numbers including reference number, part number, description, quantity, serial number range and interchangeability. Country codes are also explained.
Kubota kx121 2 excavator parts catalogue manualfjskkdmmmse
The document provides instructions and part numbers for a parts book covering a KX121-2 excavator. It lists the various systems of the excavator and corresponding part numbers with descriptions. Notes are provided on country codes that may be relevant for part numbers. The document includes an index of all systems and subsystems covered in the parts book.
Kubota kx101 excavator parts catalogue manualfjskkdmmmse
The document provides instructions for using a parts book. It defines the column headings used on parts pages, including part number, description, quantity, and compatibility codes. It notes country codes may be included and explains their meanings. Remarks may specify exceptions for certain countries.
Kubota kx91 3 excavator parts catalogue manualfjskkdmmmse
The document provides instructions and definitions for parts books. It explains that the heading on parts pages will match the picture page. It defines the column headings for part number pages including reference number, part number, description, quantity, serial number range and interchangeability. It notes country codes that may be included and what they represent.
Kobelco tlk 900 loader backhoe service repair manualfjskkdmmmse
This document is a shop manual for Kobelco Construction Machinery America LLC's TLK700, TLK800, and TLK900 loader backhoes. It provides maintenance and repair information for the models. Kobelco reserves the right to make design changes or improvements without updating previously sold units. Dimensions and specifications in the manual are approximate. Users should consult their dealer for exact product information.
Kobelco tlk 800 loader backhoe service repair manualfjskkdmmmse
This document is a shop manual for Kobelco Construction Machinery America LLC's TLK700, TLK800, and TLK900 loader backhoes. It provides information to service and repair these models, including specifications, dimensions, weights, and illustrations. The manual is copyrighted and written permission is required for any use of its editorial or pictorial content.
Kobelco tlk 700 loader backhoe service repair manualfjskkdmmmse
This document is a shop manual for Kobelco Construction Machinery's TLK700, TLK800, and TLK900 loader backhoes, providing service and repair instructions. It covers multiple models, was printed in the United States, and reserves the right to make design changes without updating previously sold units. The manual contains notes and instructions for servicing and repair work.
Kobelco lk700.a wheel loader service repair manual snrf 1558 and upfjskkdmmmse
This document appears to be the cover and introduction pages of a shop manual for Kobelco LK700 and LK700.A wheel loaders. It provides information on the manual such as the part number, applicable machines, issue dates, and a revision history. The introduction reserves the right to make improvements or changes and notes that dimensions are approximate.
This document is a repair manual for Jaguar 900-830 Profistar and Speedstar harvesters. It contains sections covering the operator's platform, cab, heating, air conditioning, driver's seat, operating elements, steering, brakes, and electrics systems. The manual provides instructions for removing, dismantling, assembling, and fitting various components of these systems. Safety information is also provided at the beginning, including important notes on general safety rules, pressure accumulators, and maintenance.
This document is a repair manual for Jaguar 900-830 Profistar and Speedstar harvesters. It contains sections covering the operator's platform, cab, heating, air conditioning, driver's seat, operating elements, steering, brakes, and electrics systems. The manual provides instructions for removing, dismantling, assembling, and fitting various components of these systems. Safety information is also provided at the beginning, including important notes on general safety rules, pressure accumulators, and maintenance.
Yale e187 glc040 065 rg-tg-zg lift truck service repair manualfjskkdmmmse
This document provides a service manual for GC/GLC040-065RG/TG/ZG (E187) lift trucks. It contains sections on various parts and systems of the lift truck, including the frame, engines, fuel systems, transmission, axles, steering, brakes, hydraulics, electrical systems, mast, and maintenance procedures. The document provides descriptions, removal and installation instructions, and repair procedures for components like the operator module, hood, overhead guard, counterweight, and LED lights. Safety warnings are included about putting the lift truck on blocks for maintenance and not operating it without the overhead guard correctly installed.
Yale d878 glp60 vx lift truck (europe) service repair manualfjskkdmmmse
The document provides service manual contents for GLP/GDP60VX and GLP/GDP70VX lift trucks. It lists sections and part numbers for various components including the operator's cab, engines, transmissions, hydraulics and electrical systems. The cab removal procedure involves disconnecting hoses, removing doors and disconnecting wiring before removing the entire cab unit.
Yale d810 glp18 vx lift truck (europe) service repair manualfjskkdmmmse
This document provides instructions for removing and installing various components on the frame of lift truck models GLP16VX, GDP16VX, GLP18VX, GDP18VX, GLP20SX, GDP20SVX (D810). The components include the hood, seat, side covers, floor plate, dash, kick panel, radiator cover, and gas springs. Detailed steps are provided for removing each component, noting any unique differences between specific lift truck models. Cautions are included to avoid damage to parts during removal.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
The document appears to be a parts list for a Massey Ferguson MF 374 VQ cab tractor from 1995. It contains over 60 items with part numbers, descriptions, quantities and other details. The list is broken into sections for the engine assembly, short engine, cylinder block, crankshaft/pistons/connecting rods, and cylinder head. It provides extensive technical specifications and part replacement information for maintenance and repair of the tractor engine.
Massey ferguson mf 374 aq cab tractor parts catalogue manualfjskkdmmmse
This document contains parts listings and technical specifications for components of a Massey Ferguson MF 374 AQ cab tractor, including the engine. It lists over 60 individual parts that make up the engine assembly, cylinder block, crankshaft, pistons, connecting rods, and cylinder head. Each part is identified by number, part name, quantity used, and other identifying information or installation notes. The document provides detailed reference information for mechanics or others servicing or repairing the tractor.
This document contains parts lists and descriptions for an MF 364 VQ tractor engine. It includes sections for the engine assembly, short engine, cylinder block, crankshaft and connecting rods, cylinder head, and other engine parts. Each section lists the part numbers, quantities, descriptions, and other details for the components of that engine system.
Massey ferguson mf 364 fq cab tractor parts catalogue manualfjskkdmmmse
This document provides parts information for the engine of a Massey Ferguson 364 FQ cab tractor. It contains listings of engine parts with part numbers, quantities, descriptions, and additional information. The parts are grouped into sections for the engine assembly, short engine, cylinder block, crankshaft/pistons/connecting rods, and cylinder head. Each item includes the part number, quantity, a description, and sometimes additional notes or specifications.
Massey ferguson mf 364 aq cab tractor parts catalogue manualfjskkdmmmse
This document contains parts lists and technical specifications for components of a Massey Ferguson MF 364 AQ CAB tractor engine. It includes lists of parts for the engine assembly, short engine, cylinder block, crankshaft, pistons and connecting rods, and cylinder head. Each item listed includes the part number, quantity, description, and additional comments as needed. The purpose is to provide detailed reference information for maintenance and repair of this tractor engine.
Massey ferguson mf 354 sq cab tractor parts catalogue manualfjskkdmmmse
This document contains parts listings and technical specifications for a Massey Ferguson MF 354 SQ CAB tractor with an AD3.152 engine. It includes lists of parts for the engine assembly, short engine, cylinder block, crankshaft, pistons and connecting rods, and cylinder head. Each item lists the part number, quantity, description, and additional comments. Specifications like serial numbers, tooth counts, and thickness measurements are provided for some parts. The document contains detailed reference information for repair and ordering replacement parts for this tractor model and engine.
Kubota kx151 excavator parts catalogue manualfjskkdmmmse
The document provides instructions and definitions for parts books. It explains that the heading on parts pages will match the picture page. It defines the column headings for part numbers including reference number, part number, description, quantity, serial number range and interchangeability. Country codes are also explained.
Kubota kx121 2 excavator parts catalogue manualfjskkdmmmse
The document provides instructions and part numbers for a parts book covering a KX121-2 excavator. It lists the various systems of the excavator and corresponding part numbers with descriptions. Notes are provided on country codes that may be relevant for part numbers. The document includes an index of all systems and subsystems covered in the parts book.
Kubota kx101 excavator parts catalogue manualfjskkdmmmse
The document provides instructions for using a parts book. It defines the column headings used on parts pages, including part number, description, quantity, and compatibility codes. It notes country codes may be included and explains their meanings. Remarks may specify exceptions for certain countries.
Kubota kx91 3 excavator parts catalogue manualfjskkdmmmse
The document provides instructions and definitions for parts books. It explains that the heading on parts pages will match the picture page. It defines the column headings for part number pages including reference number, part number, description, quantity, serial number range and interchangeability. It notes country codes that may be included and what they represent.
Kobelco tlk 900 loader backhoe service repair manualfjskkdmmmse
This document is a shop manual for Kobelco Construction Machinery America LLC's TLK700, TLK800, and TLK900 loader backhoes. It provides maintenance and repair information for the models. Kobelco reserves the right to make design changes or improvements without updating previously sold units. Dimensions and specifications in the manual are approximate. Users should consult their dealer for exact product information.
Kobelco tlk 800 loader backhoe service repair manualfjskkdmmmse
This document is a shop manual for Kobelco Construction Machinery America LLC's TLK700, TLK800, and TLK900 loader backhoes. It provides information to service and repair these models, including specifications, dimensions, weights, and illustrations. The manual is copyrighted and written permission is required for any use of its editorial or pictorial content.
Kobelco tlk 700 loader backhoe service repair manualfjskkdmmmse
This document is a shop manual for Kobelco Construction Machinery's TLK700, TLK800, and TLK900 loader backhoes, providing service and repair instructions. It covers multiple models, was printed in the United States, and reserves the right to make design changes without updating previously sold units. The manual contains notes and instructions for servicing and repair work.
Kobelco lk700.a wheel loader service repair manual snrf 1558 and upfjskkdmmmse
This document appears to be the cover and introduction pages of a shop manual for Kobelco LK700 and LK700.A wheel loaders. It provides information on the manual such as the part number, applicable machines, issue dates, and a revision history. The introduction reserves the right to make improvements or changes and notes that dimensions are approximate.
This document is a repair manual for Jaguar 900-830 Profistar and Speedstar harvesters. It contains sections covering the operator's platform, cab, heating, air conditioning, driver's seat, operating elements, steering, brakes, and electrics systems. The manual provides instructions for removing, dismantling, assembling, and fitting various components of these systems. Safety information is also provided at the beginning, including important notes on general safety rules, pressure accumulators, and maintenance.
This document is a repair manual for Jaguar 900-830 Profistar and Speedstar harvesters. It contains sections covering the operator's platform, cab, heating, air conditioning, driver's seat, operating elements, steering, brakes, and electrics systems. The manual provides instructions for removing, dismantling, assembling, and fitting various components of these systems. Safety information is also provided at the beginning, including important notes on general safety rules, pressure accumulators, and maintenance.
Yale e187 glc040 065 rg-tg-zg lift truck service repair manualfjskkdmmmse
This document provides a service manual for GC/GLC040-065RG/TG/ZG (E187) lift trucks. It contains sections on various parts and systems of the lift truck, including the frame, engines, fuel systems, transmission, axles, steering, brakes, hydraulics, electrical systems, mast, and maintenance procedures. The document provides descriptions, removal and installation instructions, and repair procedures for components like the operator module, hood, overhead guard, counterweight, and LED lights. Safety warnings are included about putting the lift truck on blocks for maintenance and not operating it without the overhead guard correctly installed.
Yale d878 glp60 vx lift truck (europe) service repair manualfjskkdmmmse
The document provides service manual contents for GLP/GDP60VX and GLP/GDP70VX lift trucks. It lists sections and part numbers for various components including the operator's cab, engines, transmissions, hydraulics and electrical systems. The cab removal procedure involves disconnecting hoses, removing doors and disconnecting wiring before removing the entire cab unit.
Yale d810 glp18 vx lift truck (europe) service repair manualfjskkdmmmse
This document provides instructions for removing and installing various components on the frame of lift truck models GLP16VX, GDP16VX, GLP18VX, GDP18VX, GLP20SX, GDP20SVX (D810). The components include the hood, seat, side covers, floor plate, dash, kick panel, radiator cover, and gas springs. Detailed steps are provided for removing each component, noting any unique differences between specific lift truck models. Cautions are included to avoid damage to parts during removal.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Globalfleet - global fleet survey 2021 full results
Nissan forklift a frame - asn series service repair manual
1. SERVICE MANUAL
Machine: A-Ergo
Manual No: 005975
ATLET SERVICE MANUAL A-ERGO
Edition 2008B
1 General information and technical data
Scope, service manual .................................................................................................. 1.3
General ................................................................................................................ 1.3
Scope of the A-Ergo model ................................................................................. 1.3
How to use the manual .................................................................................................. 1.4
Structure .............................................................................................................. 1.4
History ................................................................................................................. 1.4
Symbol key .......................................................................................................... 1.4
Safety instructions ......................................................................................................... 1.5
General ................................................................................................................ 1.5
Lifting the truck .................................................................................................... 1.6
Checks/Preparations ...................................................................................................... 1.6
Permitted lifting points .................................................................................................... 1.6
Welding on the truck ............................................................................................ 1.7
Taking the environment into consideration .......................................................... 1.7
Preparations ................................................................................................................... 1.8
Service ................................................................................................................. 1.8
Trouble shooting .................................................................................................. 1.8
Data A-Ergo ..................................................................................................................... 1.9
Designations ........................................................................................................ 1.9
Truck designation ........................................................................................................... 1.9
Type designation .......................................................................................................... 1.10
Dimensions and weights .................................................................................... 1.14
Dimensions A-Ergo ...................................................................................................... 1.14
Component specification ................................................................................... 1.15
Recommended consumable material ......................................................................... 1.16
Oil and grease ................................................................................................... 1.16
Standards and abbreviations ...................................................................................... 1.17
2. ATLET SERVICE MANUAL A-ERGO
1.2
Screws ...............................................................................................................1.17
Tightening torque, screws and nuts .............................................................................. 1.17
Tightening torque, hydraulic couplings ......................................................................... 1.18
Conversion table ........................................................................................................... 1.18
Screw types and tensile grades .................................................................................... 1.19
Colour of the truck ..............................................................................................1.20
Colour codes, cabling ........................................................................................1.20
Designations, electrical components .................................................................1.21
Standard abbreviations ......................................................................................1.22
3. General information and technical data / Scope, service manual / General 1.3
ATLET SERVICE MANUAL A-ERGO
SMA-Ergo_01_2008B.fm
Edition 2008B
1 General information and technical data
Scope, service manual
General
This manual describes the service procedures for ATLET stand-on stackers in the A-Ergo
series. Use the manual for quick and correct service of respective truck models.
The manual describes models manufactured from and including the introduction of A-
Ergo at the end of 2002.
You may find contradictions in the manual compared with the models supplied due to
optional designs, upgrades and the like.
Warning!
If the truck is rebuilt after delivery or supplemented in such a manner that safety
may be affected, ATLET AB or its authorised representative should be contacted.
The electrical system must never be rewired in any form after delivery without written
authorisation from Atlet AB, since this may change the measured and applicable EMC.
The content of this service manual is protected by copyright law and may not be copied,
fully or in part, without written permission. The material has undergone careful
examination with regard to correctness. Subject to alteration. In the event of inconsistent
information in the Swedish and translated editions, it is the Swedish edition that applies.
Modifications and updates will be distributed via ATLET AB Service Manual Change.
Scope of the A-Ergo model
The stand-on stacker trucks in the A-Ergo series are available in a number of different
variants with mast system, straddle lift, extendable stabilisors and telescopic forks (ATF).
4. 1.4 General information and technical data / How to use the manual / Structure
ATLET SERVICE MANUAL A-ERGO
How to use the manual
Structure
The manual is built up according to the same principle as ATLET spare parts catalogues,
with the truck divided into one subsystem per section.
Sections 1 - 3 in this manual contain comprehensive information regarding technical data,
service instructions and tools.
Sections 4-12 in the manual contain information limited to a specific area in the truck
concerning a description of the mechanical handling of different components. For
example, Masts (section 6) and Hydraulic System (section 8).
With regard to software this is described under section 10.
The main principle for extra accessories is to place them under the respective sections.
Otherwise they are placed under section 12 “Miscellaneous”. For this reason section 12
is not always included in the Service Manual.
For specific problems or information about procedures, look in the main index for the
correct section in the manual.
History
The following modifications affect the service procedure.
Symbol key
Warning!
Used if there is a risk of personal injury.
Important!
Used if there is a risk of damage to machine.
Note!
Used for general observation.
Table 1.1 Upgrades of the truck that affect the service procedure
Date Chassis no. Event
5. General information and technical data / Safety instructions / General 1.5
ATLET SERVICE MANUAL A-ERGO
Safety instructions
General
Extreme importance must be placed on precautionary measures to avoid accidents during
all work on the vehicle.
A general rule is to always implement preventive measures that are adapted to the type
of vehicle to be worked on. The general rules below must always be observed:
• Smoking or naked flames are strictly forbidden as there is a risk of explosion in the
vicinity of batteries and while working on gas equipped vehicles.
• The battery should always be protected during grinding work.
• Local fire regulations must be followed.
• The drive wheel should always be lifted up free from the floor during service work
to prevent the vehicle from moving.
• Before working on the electrical system the battery plug should be pulled out.
• To prevent injuries caused by crushing the battery plug should always be removed
when working on or around the mast and hydraulic unit. The mast or hydraulic unit
can be actuated due to an electrical fault or a mistake while working. The battery
plug may only be connected while trouble shooting, and when the greatest of care
is exercised, (with the truck raised).
Warning!
Having the power connected to the truck when working on or around the mast can
result in fatal injury!
• When working on or around the mast and the hydraulic unit, they must be locked
by using the mast lock, wooden blocks or some other appropriate means.
• No other persons should be in the vicinity of the truck when it is test run in
conjunction with repair work, in view of the risk of accidents or near-accidents
from the truck making an unexpected manoeuvre.
• The system should not be pressurised, e.g. the pump motor shutoff and the forks
down, when dismantling parts of the hydraulic system.
• All metal objects such as watches and rings should be removed when working on
the electrical system, or in its immediate vicinity. A short-circuit from such objects
can result in serious burn injuries.
6. 1.6 General information and technical data / Safety instructions / Lifting the truck
ATLET SERVICE MANUAL A-ERGO
Lifting the truck
Checks/Preparations
• When the truck is lifted by using a jack, make sure you secure it with blocks.
The truck must not rest on the jack, while work is carried out.
• Ensure that straps, wires or chains have a sufficient lifting capacity before lifting
the truck.
• Ensure that the drive wheel runs free of the floor before trouble shooting.
Permitted lifting points
Figure1.1 shows where the permitted lifting points are placed on the truck. The lifting
points are marked with a decal representing a lifting hook; the lifting holes in the outer
mast should be used.
Warning!
The machine must never be lifted from the overhead guard.
Figure 1.1 Permitted lifting points, A-Ergo
01001_SM_A-Ergo.eps
7. General information and technical data / Safety instructions / Welding on the truck 1.7
ATLET SERVICE MANUAL A-ERGO
Welding on the truck
• During welding work the battery plug should always be disconnected and all
connections to the control units and regulators (concerns all electronic units)
should be disconnected. On completion of welding work the connectors should
first be connected to the electronic units, after which the battery plug is connected
to the battery.
• The welding earth should always be connected as close to the welding area as
possible to eliminate damage to surrounding components.
Taking the environment into consideration
Atlet AB takes care of the environment. Waste material in conjunction with repairs,
maintenance, cleaning, or scrapping, should be collected and disposed of in an
environment-friendly way and in accordance with the directives of respective countries.
Such work must only be carried out in areas intended for this purpose.
Environmentally hazardous waste, such as oil filters, batteries, hydraulic hoses and
electronics, can have a negative effect on the environment, or health, if handled
incorrectly. Recyclable material should be taken care of by specialised authorities.
8. 1.8 General information and technical data / Preparations / Service
ATLET SERVICE MANUAL A-ERGO
Preparations
Service
• Go through all the safety instructions.
• Make sure that you have all the essential tools close at hand before starting work.
• Before cabling or other electrical components are disconnected, check the colour
codes and check for damage to cables or connections.
• When complex components are repaired and dismantled, make sure that you have
good control of the different component parts to avoid the risk of confusion.
• When repairing or maintaining sensitive components, make sure that you use clean
tools and work on a clean work surface.
• Dismantle, inspect and adjust components according to the prescribed routines.
See respective sections for detailed information.
Trouble shooting
When you suspect a faulty component, do not replace it immediately. First check the
surrounding equipment and carry out complete trouble shooting routines. Make sure you
know the reason for the fault before replacing a component.
9. General information and technical data / Data A-Ergo / Designations 1.9
ATLET SERVICE MANUAL A-ERGO
Data A-Ergo
Designations
Truck designation
Table 1.2 Truck designations
Truck type A-Ergo Stand-on stacker, Standard
A-Ergo TF Stand-on stacker with telescopic forks
Load capacity A-Ergo 1600 or 2000 kg
A-Ergo TF 1000 kg
10. 1.10 General information and technical data / Data A-Ergo / Designations
ATLET SERVICE MANUAL A-ERGO
Type designation
1. Model designation.
2. Type Series no./Version (S=Special version.).
3. Year of manufacture, week, and warranty period in months (only Sweden).
(On the assumption that the service instructions in the warranty regulations are
followed.)
4. Any load restrictions, depending on the position of the load on the forks (D) and/or
lifting height (Q).
Figure 1.2 Example of type plate (–2006w36)
1
2
3
4
Typskylt.eps
DD HH
QQ
ATLET AB MÖLNLYCKE SWEDEN
H D QH D Q
MODELL
MODEL
MODELL
MODELE
SERIE NR.
SERIAL NO.
SERIEN NR.
NOMERO DESERIE
TILLV. ÅR
YEAR OF MANUF.
BAUJAHR
AN DE FABR
TILLÅTEN LAST
ACTUAL CAPACITY
WIRKLICHE TRAGFÄHIGKEIT
CAPACITE EFFECTIVE
LYFTHÖJD
LIFTHEIGHT
HUBHÖHE
HAUTEUR DE LEVEE
TYNGDPUNKTSAVSTÅND
BATTERISPÄNNING
BATTERY VOLTAGE
BATTERIESPANNUNG
TENSION DE LA BATTERIE
VIKT UTAN BATTERI
WEIGHT WITHOUT BATTERY
GEWICHT OHNE BATTERIE
MASSE SANS BATTERIE
MINSTA BATTERIVIKT
MINIMUM BATTERY WEIGHT
MINDESTGEWICHT DER BATTERIE
MASSE MINIMAL DE LA BATTERIE
MAXIMAL BATTERIVIKT
MAXIMUM BATTERY WEIGHT
HÖCHSTGEWICHT DER BATTERIE
MASSE MAXIMAL DE LA BATTERIE
LOAD CENTRE DISTANCE
LASTSCHWERPUNKT
DISTANCE DE CENTRE
MMMM MMMM KGKG
KG
VOLT-DC
KG
KG
160 SDTFV 800 A
A 10568/01 S
2003w01-6
8000
3600
600
500
1600
1000
24
1150
370
540
11. General information and technical data / Data A-Ergo / Designations 1.11
ATLET SERVICE MANUAL A-ERGO
1. Model designation.
2. Type Series no./Version (S=Special version.).
3. Year of manufacture, week, and warranty period in months (only Sweden).
(On the assumption that the service instructions in the warranty regulations are
followed.)
4. Any load restrictions, depending on the position of the load on the forks (D) and/or
lifting height (Q).
Note!
In cases where the machine plate has been lost or become illegible, it must be
renewed immediately. In order to identify the machine's serial number, there is a
plate located on each main component such as drive motor, gearbox, hydraulic unit,
TMC etc. For some machines there is even a plate attached inside the battery
compartment, or serial number punched on the side of the mast.
Figure 1.3 Example of type plate (2006w37–)
SM_A-Ergo_1A.eps
Model
Modell
Serial no.
Serie nr.
Year of manufacturing
Tillverkningsår
Weight without battery
Vikt utan batteri
Battery weight min.
Batterivikt min.
Battery weight max.
Batterivikt max.
Battery voltage
Batterispänning
Refernce number
Referensnummer
ATLET AB MÖLNLYCKE SWEDEN
H (mm)
H
XXXXXXXX
Q (kg)D (mm)
D
Q
4
3
2
1
12. 1.12 General information and technical data / Data A-Ergo / Designations
ATLET SERVICE MANUAL A-ERGO
Figure 1.4 Example of plate with serial number.
SER XXXXXX
WEEK XXXX
SER XXXXXX
WEEK XXXX
13. General information and technical data / Data A-Ergo / Designations 1.13
ATLET SERVICE MANUAL A-ERGO
Explanation of Model designation
Example: A 160 S DTF V S 360 225 40
Truck type
Load capacity/10
Narrow gauge S
Broad gauge B
Telescopic mast T
Telescopic mast, Free-lift TF
Double telescopic mast DT
Double telescopic mast, Free-lift DTF
Free-view mast V
Stabilisers S
Straddle lift H
Lifting height in cm
Battery Ah/5
Charger Ampere
14. 1.14 General information and technical data / Data A-Ergo / Dimensions and weights
ATLET SERVICE MANUAL A-ERGO
Dimensions and weights
Dimensions A-Ergo
Figure 1.5 Positions for dimensions A-Ergo
Figure 1.6 Positions for dimensions A-Ergo TF
B1
V
B
B2
R2
H6
L2
L3
L4 L1
L
H3
H4
H5
H7
H2
H1
A-Ergo Mått A.eps
B1
V
B2
B
R2
H6
L2
L3
L4
U L1
L1
L
H3
H4
H5
H7
H2
H1
H7
A-Ergo Mått ATF.eps
15. General information and technical data / Data A-Ergo / Component specification 1.15
ATLET SERVICE MANUAL A-ERGO
Component specification
Table 1.3 Component specification
Component Specification
Drive motor Drive voltage 16V
Output standard 2.2 / 2.4 kW
S2 60 min
Insulation resistance >24 kΩ
Gearbox Gear ratio (standard) 16,95:1
Oil volume 1.5 litres
Hydraulic system Max pressure 17.5 MPa
(=175 kp/cm²)
Oil volume max 19 litres
Hydraulic unit (motor and pump) Type 1 Output 3.5 kW
Type 2 Output 4.5 kW
Type 3 Output 7.6 kW
Control system for drive motor Type Zapi AC1 AC Transistor
Voltage 24 V
Max current 250A (RMS)
in 2 min
Control system for steering wheel Type Zapi AC1 AC Transistor
Voltage 24V
Max current 70A
Fuses Control fuses 2 pcs. 7.5A
30.0A
Pump motor fuse 1 pcs. 250A
Drive motor fuse 1 pcs. 160A
16. 1.16 General information and technical data / Recommended consumable material / Oil and grease
ATLET SERVICE MANUAL A-ERGO
Recommended consumable material
Oil and grease
Important!
Do not mix different lubricants – definitely not synthetic oil with mineral oil!
Table 1.4 Table of recommended types of oil and grease
Brand Gearbox oil
As per API value
GL-5
Hydraulic oil
As per ISO VG 32, VG 15
Bearing grease
NLGI 2
Lithium base
Worm gear oil
(Only ATF)
Normal Cold store Normal
(32)
Cold store
(15)
BP BP
Energear
Hypo
80W/140
EP
BP
Energear
SHX-S
75W/140
BP Bartran
HV-32
BP Bartran
SHF-S
BP Energrease
LC 2
BP Energol
SGXP 150
Castrol Hypol C
80 W/90
- Hyspin
SHS 32
Hydraulic
oil OM 15
Alt:Hyspin
AWH 15
LMx Alpha syn
T 220
Mobil Mobilube
HD 85 W/
90
- DTE 13 M
SHS 32
Flowrex 1 Mobilplex 48 GLY
goyle 30
Shell Spirax HD
85 W/90
- Tellus oil
TX 32
Tellus oil
T 15
Retinax EP2 Tivela WB
Statoil /
Exxon
Gearway
G5
80 W/90
- SHS 32 J 26 Uniway
LIX 625
Snäckväxel-
olja 375 S
Texaco Geartex
EP-
C 80 W/90
- Rando oil
HDZ 32
Rando oil
HDZ 15
Hytex EP2 Synlube
CLP 220
17. General information and technical data / Standards and abbreviations / Screws 1.17
ATLET SERVICE MANUAL A-ERGO
Standards and abbreviations
Screws
Tightening torque, screws and nuts
The tightening torque in the table above are standard values. In some cases a specific
tightening torque is specified in respective sections. If no tightening torque is specified
in the service instructions, the values shown in the table above apply.
Table 1.5 Tightening torque, screws and nuts
DIM Tensile grade
4,6 8,8 10,9 12,9
Nm Nm Nm Nm
M4 1,1 2,9 4,0 4,9
M5 2,2 5,7 8,1 9,7
M6 3,7 9,8 14 17
M8 8,9 24 33 40
M10 17 47 65 79
M12 30 81 114 136
M14 48 128 181 217
M16 74 197 277 333
M18 103 275 386 463
M20 144 385 541 649
18. 1.18 General information and technical data / Standards and abbreviations / Screws
ATLET SERVICE MANUAL A-ERGO
Tightening torque, hydraulic couplings
Conversion table
Table 1.6 Tightening torque, hydraulic couplings
Tightening torque: Pipe thread / metric thread:
Metric fine thread Whitworth pipe thread MA (Nm) with
ring
MA (Nm) with elastic
M10 x 1 G 1/8" 25 10
M12 x 1.5 30 20
M14 x 1.5 G 1/4" 50 30
M16 x 1.5 G 3/8" 80 35
M18 x 1.5 90 40
M20 x 1.5 G 1/2" 130 50
M22 x 1.5 150 60
M26 x 1.5 250 70
M27 x 1.5 G 3/4" 250 80
M27 x 2 250 90
G 1" 350 140
M33 x 2 400 140
M42 x 2 G 11/4" 600 240
M48 x 2 G 11/2" 800 300
Table 1.7 Conversion table, torque units
Newton metre
(Nm)
Kilopond metre
(kpm)
Poundforce inch
(lbg x in)
Poundforce foot
(lbf x ft)
1 0,10 8,85 0,74
9,81 1 86,80 7,23
0,11 0,01 1 0,08
1,36 0,14 12,00 1
19. General information and technical data / Standards and abbreviations / Screws 1.19
ATLET SERVICE MANUAL A-ERGO
Screw types and tensile grades
Marking with the manufacturer trademark, including the tensile grade, is compulsory for
screws with a thread diameter from and including 5 mm and in tensile grades according
to the table above. Marking only takes place when the shape of the product permits this.
Table 1.8
Figure Screw type Designation Tensile grade
M6S Hexagon screw 8,8
10,9
MC6S Hexagon hole screw 8,8
10,9
12,9
MF6S Hexagon hole screw,
countersunk
10,9
MCS Slotted screw 4,6
MVBF Oval head
countersunk screw
4,6
Figure 1.7 Example of marking
SM 031.1
8.8
12.9
12.9
8.8
20. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
21. 1.20 General information and technical data / Standards and abbreviations / Colour of the truck
ATLET SERVICE MANUAL A-ERGO
Colour of the truck
0
The truck is painted with the following NCS colour codes:
Colour codes, cabling
The colour codes of all the cables in the truck can be read off from the Atlet wiring
diagram. The abbreviations have the following implication:
Note!
Two-colour cables are shown with both colour codes separated by a slash.
E.g. blue/yellow cable is shown with colour code BL/Y.
Table 1.9 NCS colour codes
Machine colour Designation
Yellow NCS 0070-Y20R
Medium grey NCS 7000
Dark grey NCS 8000
Table 1.10 Colour codes, Atlet wiring diagram
Code Cable colour
BE Beige
BL Blue
BN Brown
GN Green
GR Grey
OR Orange
P Pink
R Red
SB Black
VO Violet
W White
Y Yellow
22. General information and technical data / Standards and abbreviations / Designations, electrical
ATLET SERVICE MANUAL A-ERGO
Designations, electrical components
Electrical components normally have a designation of two letters:
Example SL = Switch for Lowering function
Table 1.11 First letter
Code Designation
A Component or function without its
own letter below
D Diode
E Electrical component
F Fuse
I Indicator
K Connector
L Lamp
M Motor
P Plug
R Relay
S Switch
T Terminal
V Valve
W Audible warning
Table 1.12 Second letter
Code Designation
B Brake
C Control system
E Emergency function
F Forward
H Hour
K Key
L Lowering
M Manoeuvre
P Pump
R Reverse
S Speed
23. 1.22 General information and technical data / Standards and abbreviations / Standard abbreviations
ATLET SERVICE MANUAL A-ERGO
Standard abbreviations
Table 1.13 Standard abbreviations
Magnitude Unit Designation
Current Ampere A
Voltage Volt V
Resistance Ohm Ω
Output Watt W
Torque Newton metre Nm
Pressure Pascal Pa