This document provides safety instructions for operating and maintaining wheel loaders. It outlines important safety symbols and risks from failing to follow safety procedures. Personnel operating or repairing the loaders must be properly trained and qualified. Maintenance and repairs should only be done by authorized technicians using proper procedures, tools and replacement parts. Failure to follow the safety instructions could result in health risks or equipment damage. The instructions provide guidance on fundamental safety practices, operator responsibilities, required protective equipment, and emergency response. Sections are dedicated to specific safety procedures for operations, maintenance, repairs and working on key components like engines, hydraulics and electronics. Adhering to the safety guidelines is essential to safely operate and service these machines.
New holland eh130 crawler excavator service repair manualudjjsjkkddkmme
This document is the service manual for the EH130 crawler excavator. It contains 6 sections that provide specifications, maintenance procedures, system descriptions, disassembly/assembly instructions, troubleshooting, and engine information. The table of contents lists the chapters for each of these sections, including safety, specifications, dimensions, tools, maintenance schedules, procedures, control systems, hydraulics, electrical systems, components, air conditioning, attachments, upper structure, travel systems, and engine troubleshooting. The safety section provides general safety information and lists specific safety precautions that should be followed when operating or servicing the excavator.
Dressta TD-40C Crawler Dozer Bulldozer Service Repair Manual S/N 1501 and upfujsejjkekmme
This is the Highly Detailed factory service repair manual for theDRESSTA TD-40C CRAWLER DOZER BULLDOZER, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.DRESSTA TD-40C CRAWLER DOZER BULLDOZER Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Introduction
Cooling System
Electrical
Engine
Hydraulic Torque Converter
Transmission
Steering System
Sprocket Drive
Track and Track Frame Assembly
Hydraulics
Mounted Equipment
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveDRESSTA TD-40C CRAWLER DOZER BULLDOZER Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
This document provides safety information and guidelines for engineers servicing a machine. It describes various safety symbols used in the manual and outlines safety precautions to follow when performing maintenance, including wearing protective equipment, using the correct tools, stopping the engine before working, and securing any moving parts. The manual structure is also summarized.
Doosan dl550 3 wheel loader service repair manualjfdjjskfkksmemm
This document provides safety instructions for wheel loaders. It covers general safety, transportation, operation, maintenance, and environmental circumstances. Operators must read and understand the safety messages in the manual and on decals before operating equipment. Only trained personnel should operate and maintain wheel loaders. Safe operation is the operator's responsibility. Operators must know their equipment and how to properly use work tools and attachments.
Doosan mega 400 v 400 v wheel loader service repair manual (serial number 100...jfdjjskfkksmemm
- Daewoo reserves the right to improve its products at any time without obligation to update previously sold products. Consumers should periodically check with distributors for documentation on purchased equipment.
- The shop manual covers specifications, maintenance procedures, and repair information for the Mega 400-V wheel loader, including safety guidelines, torque specifications, and hydraulic and electrical schematics.
- Illustrations in the manual are representational and may vary from the actual equipment. The manual is for serial numbers 1001 and up and was published in February 2001.
Doosan dl220 wheel loader service repair manualjfdjjskfkksmemm
This document provides safety information for wheel loaders. It outlines general safety essentials, including not modifying the machine without authorization. Operators should be trained and authorized, and follow all safety rules. Guards and covers and safety features like seat belts should be used properly. Inside the cab, keep floors clear and avoid distractions. When operating, do not put hands or head outside the cab. Secure long hair and loose clothing, and wear protective gear like eye protection and gloves.
Takeuchi tb240 mini excavator service repair workshop manual (serial no. 1241...jfdjjskfkksmemm
1) The document is a service manual that provides procedures for maintenance and repair of a machine for engineers who service it. It describes disassembly, assembly, inspection, troubleshooting and specifications.
2) The manual uses symbols to indicate parts like the serial number and provides the structure of the manual which includes sections on safety, service data, functions, disassembly/assembly and troubleshooting.
3) The manual provides safety precautions for maintenance personnel which include wearing protective gear, installing safety equipment, properly preparing the work area, and procedures to safely work on and around the machine.
Daewoo doosan solar 330 lc v excavator service repair manualjfdjjskfkksmemm
Daewoo provides safety guidelines for operating excavators. Key points include:
1. Excavators are primarily designed for earthmoving, not lifting, which requires approved configurations.
2. Lifting capacity ratings assume level ground and loads supported evenly without side loads.
3. Operators should follow all safety instructions and check local regulations regarding heavy lifting.
4. Work crews must coordinate signals and procedures to ensure safe lifting.
The full safety document covers general safety, worksite precautions, operating procedures, equipment maintenance, transportation, and lifting capacity ratings. Operators and crews should thoroughly review all guidelines to prevent injury or damage.
New holland eh130 crawler excavator service repair manualudjjsjkkddkmme
This document is the service manual for the EH130 crawler excavator. It contains 6 sections that provide specifications, maintenance procedures, system descriptions, disassembly/assembly instructions, troubleshooting, and engine information. The table of contents lists the chapters for each of these sections, including safety, specifications, dimensions, tools, maintenance schedules, procedures, control systems, hydraulics, electrical systems, components, air conditioning, attachments, upper structure, travel systems, and engine troubleshooting. The safety section provides general safety information and lists specific safety precautions that should be followed when operating or servicing the excavator.
Dressta TD-40C Crawler Dozer Bulldozer Service Repair Manual S/N 1501 and upfujsejjkekmme
This is the Highly Detailed factory service repair manual for theDRESSTA TD-40C CRAWLER DOZER BULLDOZER, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.DRESSTA TD-40C CRAWLER DOZER BULLDOZER Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Introduction
Cooling System
Electrical
Engine
Hydraulic Torque Converter
Transmission
Steering System
Sprocket Drive
Track and Track Frame Assembly
Hydraulics
Mounted Equipment
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveDRESSTA TD-40C CRAWLER DOZER BULLDOZER Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
This document provides safety information and guidelines for engineers servicing a machine. It describes various safety symbols used in the manual and outlines safety precautions to follow when performing maintenance, including wearing protective equipment, using the correct tools, stopping the engine before working, and securing any moving parts. The manual structure is also summarized.
Doosan dl550 3 wheel loader service repair manualjfdjjskfkksmemm
This document provides safety instructions for wheel loaders. It covers general safety, transportation, operation, maintenance, and environmental circumstances. Operators must read and understand the safety messages in the manual and on decals before operating equipment. Only trained personnel should operate and maintain wheel loaders. Safe operation is the operator's responsibility. Operators must know their equipment and how to properly use work tools and attachments.
Doosan mega 400 v 400 v wheel loader service repair manual (serial number 100...jfdjjskfkksmemm
- Daewoo reserves the right to improve its products at any time without obligation to update previously sold products. Consumers should periodically check with distributors for documentation on purchased equipment.
- The shop manual covers specifications, maintenance procedures, and repair information for the Mega 400-V wheel loader, including safety guidelines, torque specifications, and hydraulic and electrical schematics.
- Illustrations in the manual are representational and may vary from the actual equipment. The manual is for serial numbers 1001 and up and was published in February 2001.
Doosan dl220 wheel loader service repair manualjfdjjskfkksmemm
This document provides safety information for wheel loaders. It outlines general safety essentials, including not modifying the machine without authorization. Operators should be trained and authorized, and follow all safety rules. Guards and covers and safety features like seat belts should be used properly. Inside the cab, keep floors clear and avoid distractions. When operating, do not put hands or head outside the cab. Secure long hair and loose clothing, and wear protective gear like eye protection and gloves.
Takeuchi tb240 mini excavator service repair workshop manual (serial no. 1241...jfdjjskfkksmemm
1) The document is a service manual that provides procedures for maintenance and repair of a machine for engineers who service it. It describes disassembly, assembly, inspection, troubleshooting and specifications.
2) The manual uses symbols to indicate parts like the serial number and provides the structure of the manual which includes sections on safety, service data, functions, disassembly/assembly and troubleshooting.
3) The manual provides safety precautions for maintenance personnel which include wearing protective gear, installing safety equipment, properly preparing the work area, and procedures to safely work on and around the machine.
Daewoo doosan solar 330 lc v excavator service repair manualjfdjjskfkksmemm
Daewoo provides safety guidelines for operating excavators. Key points include:
1. Excavators are primarily designed for earthmoving, not lifting, which requires approved configurations.
2. Lifting capacity ratings assume level ground and loads supported evenly without side loads.
3. Operators should follow all safety instructions and check local regulations regarding heavy lifting.
4. Work crews must coordinate signals and procedures to ensure safe lifting.
The full safety document covers general safety, worksite precautions, operating procedures, equipment maintenance, transportation, and lifting capacity ratings. Operators and crews should thoroughly review all guidelines to prevent injury or damage.
New holland f156.6 grader service repair manualfjjskekmdmme
- The document provides safety instructions for operating and servicing a motor grader. It emphasizes following all safety precautions to avoid risks to personnel and damage to equipment.
- Only authorized personnel should operate and service the grader. Proper protective equipment and tools must be used.
- The grader should only be used for its intended purposes like grading surfaces. Unauthorized modifications are prohibited.
- Operating procedures like refueling, driving, transport and maintenance must follow the safety guidelines to prevent accidents. Inspections and repairs should only be done by trained technicians.
New holland f156.6 a grader service repair manualfjjsekdmme
- The document provides safety instructions for operating and servicing a motor grader. It emphasizes following all safety precautions to avoid risks to personnel and damage to equipment.
- Only authorized personnel should operate and service the grader. Proper protective equipment and tools must be used.
- Before any work, the grader must be inspected for defects and safety equipment checked. Any issues must be reported and repaired immediately. The grader should only be operated when in a safe condition.
New holland f106.6 a grader service repair manualfhsejkdkme
The document provides safety instructions for operating and maintaining a motor grader, outlining proper use of the equipment, organizational measures to ensure safety, responsibilities of personnel, and precautions for different operational phases and maintenance activities. Proper training and use of safety equipment is emphasized to avoid risks to health and safety.
New holland f106.6 grader service repair manualfhsejkdkmem
The document provides safety instructions for operating and maintaining a motor grader, outlining proper use of the equipment, organizational measures to ensure safety, responsibilities of personnel, and precautions for different operational phases and maintenance activities. Special attention is given to following instructions, using qualified personnel, and avoiding unauthorized modifications to protect operator safety.
New holland mh plus wheel excavator service repair manualfjjskekmsemm
Working from the operator’s seat only
Never take passengers on the machine
Working from the operator’s seat only
Never take passengers on the machine
Safety instructions before starting work, operating, servicing and transporting the machine are outlined to prevent injury and damage. Operators must wear protective equipment, keep work areas clear, use machine access properly, and secure themselves with seat belts while operating only from the operator's seat. No passengers are allowed.
New holland lw230 b wheel loader service repair manualfujdjffjkskemme
This section provides identification data and general specifications for the Cummins series C engine used in the LW230.B wheel loader, including:
- The engine data plate provides the model, displacement, rated power and other key specifications.
- The fuel injection pump data plate includes the pump serial number and Bosch part numbers.
- The general engine specifications include its configuration, displacement, power ratings, torque curves, cooling requirements and other technical details.
New holland lw230 b wheel loader service repair manualfudjsjfekskkem
This section provides identification data and general specifications for the Cummins series C engine used in the LW230.B wheel loader, including:
- The engine data plate provides the model, displacement, rated power and other key specifications.
- The fuel injection pump data plate includes the pump serial number and Bosch part numbers.
- The general engine specifications include its configuration, displacement, power ratings, torque curves, cooling requirements and other technical details.
New Holland 8670 8770 8870 8970 Tractor Workshop Service Repair Manual.pdfExcavator
New Holland 8670 8770 8870 8970 Tractor Workshop Service Repair Manual
This service manual is a treasure trove of information, meticulously compiled to cover every aspect of the Bobcat M-970 Skid Steer Loader's service and maintenance. From the engine to the hydraulics, electrical systems to preventive maintenance, it leaves no stone unturned. This comprehensive coverage ensures that both seasoned technicians and novice operators have the guidance they need to keep the loader in prime condition.
General Maintenance
Troubleshooting
Engine Service / Repair
Transmission Service / Repair
Brake System
Wiring Diagram
Electrical System
Suspension
Periodic Lubrication
Steering
Cooling System
Fuel Injection / Fuel System
Emission System
Heater/ Air Conditional
Engine Control System
Chassis / Body
Restraint System
Interior
Differential / Drive
Axle.
New holland lw230 b wheel loader service repair manualfjskeazqkkdmme
The Cummins series C engine is a 6 cylinder, inline, turbocharged diesel engine with a displacement of 8268 cm3. It produces a gross power of 179 kW at 2200 rpm and peak power of 192 kW at 2000 rpm, with a maximum torque of 678 Nm at 850 rpm. The engine weighs approximately 617 kg and has a compression ratio of 18.0:1.
New holland eh130 crawler excavator service repair manualfijsfjskekmme
This document is a service manual for the New Holland Construction EH130 crawler excavator. It contains 6 sections that cover specifications, maintenance, systems, disassembly/assembly, troubleshooting, and the engine. The table of contents lists chapters for safety information, specifications, attachment dimensions, tools, maintenance schedules, procedures, systems, components, troubleshooting guides, and the engine. It provides detailed instructions and specifications to service technicians for repairing and maintaining the excavator.
New holland eh130 crawler excavator service repair manualufjjsefkksemme
This document is the service manual for the EH130 crawler excavator. It contains 6 sections that provide specifications, maintenance procedures, system descriptions, disassembly/assembly instructions, troubleshooting, and engine information. The table of contents lists the chapters for each of these sections, including safety information, specifications, maintenance standards, hydraulic, electrical and other systems, components, troubleshooting guides, and the engine. The safety section provides general safety information and precautions regarding the safe operation, inspection and maintenance of the excavator.
Hyundai r22 7 mini excavator service repair manualfjjsekdmme
This service manual provides maintenance and repair instructions for the machine. It includes sections on safety precautions, an outline of the machine components, inspection and maintenance procedures, disassembly and assembly instructions, and troubleshooting. Proper maintenance is important to prevent failures and problems. The manual aims to help technicians efficiently service the machine by providing accurate descriptions and repair techniques. Routine maintenance includes checking fluid levels, lubricating components, inspecting parts for wear and damage, and replacing filters at regular intervals. Precautions should be taken during disassembly, assembly, and operation to ensure safety and efficiency.
Hyundai r16 7 mini excavator service repair manualfjjsekdmme
This service manual provides instructions for maintaining and repairing an excavator. It outlines the machine's components and systems, inspection and maintenance procedures, and repair techniques. The manual instructs technicians to thoroughly clean parts, use the proper tools and fasteners, and replace worn components to efficiently service the excavator. Regular maintenance such as checking fluid levels, lubricating parts, and inspecting for damage is recommended at intervals of 50, 100, 250, 500, and 1,000 hours of use. The manual aims to help technicians properly maintain the excavator to ensure long life.
Hyundai r15 7 mini excavator service repair manualfjjsekdmme
This service manual provides maintenance and repair instructions for the HY1570001 excavator. It outlines inspection and maintenance procedures, including checking fluid levels, lubricating parts, inspecting wear items, and adjusting components. The manual emphasizes performing repairs correctly using the proper tools, materials, and techniques. Maintaining the excavator according to the schedules in the manual will help ensure long life and prevent failures.
Hyundai l4 gc diesel engine service repair manualfjjsekdmme
This shop manual covers service procedures for the Hyundai L4GC industrial engine. It includes specifications, troubleshooting, removal, installation, disassembly and assembly procedures to facilitate efficient service and repair. Proper service methods and repair procedures are essential for the safe and reliable operation of the engine. Read this manual thoroughly before servicing to purchase the correct parts and safely service the engine.
Hyundai hsl850 7 a skid steer loader service repair manualfjjsekdmme
This document provides instructions for removing and installing a hydraulic pump, as well as summarizing the pump's structure and components. It describes disconnecting hoses from the pump and loosening bolts to remove it. For installation, it says to tighten the bolts and reconnect the hoses. It then provides an overview of the pump's internal parts and ports. Subsequent sections give directions for adjusting pressure valves and settings. The document concludes with notes for disassembling and reassembling the pump, including replacing seals and ensuring proper orientation of parts.
Hyundai hsl850 7 skid steer loader service repair manualfjjsekdmme
The document provides instructions for removing and installing a travel motor on an excavator. It describes:
1) Removing the motor by draining oil, loosening bolts, and removing hydraulic lines and covers.
2) Disassembling the motor by removing pins, plates, seals, and shafts.
3) Cleaning and inspecting individual parts before reassembly.
4) Reassembling the motor by reversing the disassembly steps, replacing seals, and torquing bolts.
Hyundai hsl650 7 a skid steer loader service repair manualfjjsekdmme
The document provides instructions for removing and installing a travel motor on an excavator. Key steps include:
1. Lowering the bucket, shutting off the engine, and removing protective covers to access the travel motor.
2. Removing hydraulic lines and mounting bolts to separate the travel motor from the excavator.
3. Disassembling the travel motor by removing seals, gears, plates, and shafts.
4. Reassembling the travel motor by reversing the disassembly steps and ensuring proper alignment of parts.
Hyundai hsl650 7 skid steer loader service repair manualfjjsekdmme
This document provides instructions for removing and installing a main pump, describes the structure and components of the main pump, and gives an overview of the pump's operation and control system. It also provides guidelines for starting up and maintaining the pump, including filling it with oil, bleeding air from the system, checking charge pressure, and regularly changing the fluid and filter.
Hyundai hlf1518(c) 5 forklift truck service repair manualfjjsekdmme
This document provides an overview and instructions for the disassembly and assembly of a steering unit. It includes:
1) A list of tools needed and torque specifications for reassembly.
2) Step-by-step instructions for disassembling the steering unit and removing components like the end cover, gearwheel set, cardan shaft, and pressure relief valve parts.
3) Guidance on marking parts like the spool and sleeve to ensure proper reassembly.
4) Detailed steps for reassembling parts in the correct order and orientation, including installing seals, springs, and bearing races.
Hyundai hl730 3 wheel loader service repair manualfjjsekdmme
The document provides instructions for disassembling and assembling a priority valve and steering unit. It includes diagrams showing the parts of each system and the order for disassembly and assembly. Key steps for disassembly of the priority valve include loosening plugs, removing seals and springs, and pressing out the spool. Key steps for assembly include lubricating parts, placing seals and springs, and tightening plugs to the specified torque. The steering unit disassembly and assembly follows a similar process of removing and replacing individual parts like seals, bearings, plates and bushings. Cleaning and inspection of parts is recommended between disassembly and assembly.
Hyundai hl720 3 wheel loader service repair manualfjjsekdmme
The document provides instructions for disassembling and assembling a steering unit. It includes:
1) A list of parts for the priority valve and steering unit with labeled diagrams.
2) Steps for disassembling the priority valve and steering unit, which includes removing screws, pins, seals, springs, and other small parts.
3) Instructions for cleaning, inspecting, lubricating, and assembling the priority valve and steering unit, replacing worn parts as needed. Tightening torques and hydraulic connections are also provided.
More Related Content
Similar to New holland w80 wheel excavator service repair manual
New holland f156.6 grader service repair manualfjjskekmdmme
- The document provides safety instructions for operating and servicing a motor grader. It emphasizes following all safety precautions to avoid risks to personnel and damage to equipment.
- Only authorized personnel should operate and service the grader. Proper protective equipment and tools must be used.
- The grader should only be used for its intended purposes like grading surfaces. Unauthorized modifications are prohibited.
- Operating procedures like refueling, driving, transport and maintenance must follow the safety guidelines to prevent accidents. Inspections and repairs should only be done by trained technicians.
New holland f156.6 a grader service repair manualfjjsekdmme
- The document provides safety instructions for operating and servicing a motor grader. It emphasizes following all safety precautions to avoid risks to personnel and damage to equipment.
- Only authorized personnel should operate and service the grader. Proper protective equipment and tools must be used.
- Before any work, the grader must be inspected for defects and safety equipment checked. Any issues must be reported and repaired immediately. The grader should only be operated when in a safe condition.
New holland f106.6 a grader service repair manualfhsejkdkme
The document provides safety instructions for operating and maintaining a motor grader, outlining proper use of the equipment, organizational measures to ensure safety, responsibilities of personnel, and precautions for different operational phases and maintenance activities. Proper training and use of safety equipment is emphasized to avoid risks to health and safety.
New holland f106.6 grader service repair manualfhsejkdkmem
The document provides safety instructions for operating and maintaining a motor grader, outlining proper use of the equipment, organizational measures to ensure safety, responsibilities of personnel, and precautions for different operational phases and maintenance activities. Special attention is given to following instructions, using qualified personnel, and avoiding unauthorized modifications to protect operator safety.
New holland mh plus wheel excavator service repair manualfjjskekmsemm
Working from the operator’s seat only
Never take passengers on the machine
Working from the operator’s seat only
Never take passengers on the machine
Safety instructions before starting work, operating, servicing and transporting the machine are outlined to prevent injury and damage. Operators must wear protective equipment, keep work areas clear, use machine access properly, and secure themselves with seat belts while operating only from the operator's seat. No passengers are allowed.
New holland lw230 b wheel loader service repair manualfujdjffjkskemme
This section provides identification data and general specifications for the Cummins series C engine used in the LW230.B wheel loader, including:
- The engine data plate provides the model, displacement, rated power and other key specifications.
- The fuel injection pump data plate includes the pump serial number and Bosch part numbers.
- The general engine specifications include its configuration, displacement, power ratings, torque curves, cooling requirements and other technical details.
New holland lw230 b wheel loader service repair manualfudjsjfekskkem
This section provides identification data and general specifications for the Cummins series C engine used in the LW230.B wheel loader, including:
- The engine data plate provides the model, displacement, rated power and other key specifications.
- The fuel injection pump data plate includes the pump serial number and Bosch part numbers.
- The general engine specifications include its configuration, displacement, power ratings, torque curves, cooling requirements and other technical details.
New Holland 8670 8770 8870 8970 Tractor Workshop Service Repair Manual.pdfExcavator
New Holland 8670 8770 8870 8970 Tractor Workshop Service Repair Manual
This service manual is a treasure trove of information, meticulously compiled to cover every aspect of the Bobcat M-970 Skid Steer Loader's service and maintenance. From the engine to the hydraulics, electrical systems to preventive maintenance, it leaves no stone unturned. This comprehensive coverage ensures that both seasoned technicians and novice operators have the guidance they need to keep the loader in prime condition.
General Maintenance
Troubleshooting
Engine Service / Repair
Transmission Service / Repair
Brake System
Wiring Diagram
Electrical System
Suspension
Periodic Lubrication
Steering
Cooling System
Fuel Injection / Fuel System
Emission System
Heater/ Air Conditional
Engine Control System
Chassis / Body
Restraint System
Interior
Differential / Drive
Axle.
New holland lw230 b wheel loader service repair manualfjskeazqkkdmme
The Cummins series C engine is a 6 cylinder, inline, turbocharged diesel engine with a displacement of 8268 cm3. It produces a gross power of 179 kW at 2200 rpm and peak power of 192 kW at 2000 rpm, with a maximum torque of 678 Nm at 850 rpm. The engine weighs approximately 617 kg and has a compression ratio of 18.0:1.
New holland eh130 crawler excavator service repair manualfijsfjskekmme
This document is a service manual for the New Holland Construction EH130 crawler excavator. It contains 6 sections that cover specifications, maintenance, systems, disassembly/assembly, troubleshooting, and the engine. The table of contents lists chapters for safety information, specifications, attachment dimensions, tools, maintenance schedules, procedures, systems, components, troubleshooting guides, and the engine. It provides detailed instructions and specifications to service technicians for repairing and maintaining the excavator.
New holland eh130 crawler excavator service repair manualufjjsefkksemme
This document is the service manual for the EH130 crawler excavator. It contains 6 sections that provide specifications, maintenance procedures, system descriptions, disassembly/assembly instructions, troubleshooting, and engine information. The table of contents lists the chapters for each of these sections, including safety information, specifications, maintenance standards, hydraulic, electrical and other systems, components, troubleshooting guides, and the engine. The safety section provides general safety information and precautions regarding the safe operation, inspection and maintenance of the excavator.
Similar to New holland w80 wheel excavator service repair manual (11)
Hyundai r22 7 mini excavator service repair manualfjjsekdmme
This service manual provides maintenance and repair instructions for the machine. It includes sections on safety precautions, an outline of the machine components, inspection and maintenance procedures, disassembly and assembly instructions, and troubleshooting. Proper maintenance is important to prevent failures and problems. The manual aims to help technicians efficiently service the machine by providing accurate descriptions and repair techniques. Routine maintenance includes checking fluid levels, lubricating components, inspecting parts for wear and damage, and replacing filters at regular intervals. Precautions should be taken during disassembly, assembly, and operation to ensure safety and efficiency.
Hyundai r16 7 mini excavator service repair manualfjjsekdmme
This service manual provides instructions for maintaining and repairing an excavator. It outlines the machine's components and systems, inspection and maintenance procedures, and repair techniques. The manual instructs technicians to thoroughly clean parts, use the proper tools and fasteners, and replace worn components to efficiently service the excavator. Regular maintenance such as checking fluid levels, lubricating parts, and inspecting for damage is recommended at intervals of 50, 100, 250, 500, and 1,000 hours of use. The manual aims to help technicians properly maintain the excavator to ensure long life.
Hyundai r15 7 mini excavator service repair manualfjjsekdmme
This service manual provides maintenance and repair instructions for the HY1570001 excavator. It outlines inspection and maintenance procedures, including checking fluid levels, lubricating parts, inspecting wear items, and adjusting components. The manual emphasizes performing repairs correctly using the proper tools, materials, and techniques. Maintaining the excavator according to the schedules in the manual will help ensure long life and prevent failures.
Hyundai l4 gc diesel engine service repair manualfjjsekdmme
This shop manual covers service procedures for the Hyundai L4GC industrial engine. It includes specifications, troubleshooting, removal, installation, disassembly and assembly procedures to facilitate efficient service and repair. Proper service methods and repair procedures are essential for the safe and reliable operation of the engine. Read this manual thoroughly before servicing to purchase the correct parts and safely service the engine.
Hyundai hsl850 7 a skid steer loader service repair manualfjjsekdmme
This document provides instructions for removing and installing a hydraulic pump, as well as summarizing the pump's structure and components. It describes disconnecting hoses from the pump and loosening bolts to remove it. For installation, it says to tighten the bolts and reconnect the hoses. It then provides an overview of the pump's internal parts and ports. Subsequent sections give directions for adjusting pressure valves and settings. The document concludes with notes for disassembling and reassembling the pump, including replacing seals and ensuring proper orientation of parts.
Hyundai hsl850 7 skid steer loader service repair manualfjjsekdmme
The document provides instructions for removing and installing a travel motor on an excavator. It describes:
1) Removing the motor by draining oil, loosening bolts, and removing hydraulic lines and covers.
2) Disassembling the motor by removing pins, plates, seals, and shafts.
3) Cleaning and inspecting individual parts before reassembly.
4) Reassembling the motor by reversing the disassembly steps, replacing seals, and torquing bolts.
Hyundai hsl650 7 a skid steer loader service repair manualfjjsekdmme
The document provides instructions for removing and installing a travel motor on an excavator. Key steps include:
1. Lowering the bucket, shutting off the engine, and removing protective covers to access the travel motor.
2. Removing hydraulic lines and mounting bolts to separate the travel motor from the excavator.
3. Disassembling the travel motor by removing seals, gears, plates, and shafts.
4. Reassembling the travel motor by reversing the disassembly steps and ensuring proper alignment of parts.
Hyundai hsl650 7 skid steer loader service repair manualfjjsekdmme
This document provides instructions for removing and installing a main pump, describes the structure and components of the main pump, and gives an overview of the pump's operation and control system. It also provides guidelines for starting up and maintaining the pump, including filling it with oil, bleeding air from the system, checking charge pressure, and regularly changing the fluid and filter.
Hyundai hlf1518(c) 5 forklift truck service repair manualfjjsekdmme
This document provides an overview and instructions for the disassembly and assembly of a steering unit. It includes:
1) A list of tools needed and torque specifications for reassembly.
2) Step-by-step instructions for disassembling the steering unit and removing components like the end cover, gearwheel set, cardan shaft, and pressure relief valve parts.
3) Guidance on marking parts like the spool and sleeve to ensure proper reassembly.
4) Detailed steps for reassembling parts in the correct order and orientation, including installing seals, springs, and bearing races.
Hyundai hl730 3 wheel loader service repair manualfjjsekdmme
The document provides instructions for disassembling and assembling a priority valve and steering unit. It includes diagrams showing the parts of each system and the order for disassembly and assembly. Key steps for disassembly of the priority valve include loosening plugs, removing seals and springs, and pressing out the spool. Key steps for assembly include lubricating parts, placing seals and springs, and tightening plugs to the specified torque. The steering unit disassembly and assembly follows a similar process of removing and replacing individual parts like seals, bearings, plates and bushings. Cleaning and inspection of parts is recommended between disassembly and assembly.
Hyundai hl720 3 wheel loader service repair manualfjjsekdmme
The document provides instructions for disassembling and assembling a steering unit. It includes:
1) A list of parts for the priority valve and steering unit with labeled diagrams.
2) Steps for disassembling the priority valve and steering unit, which includes removing screws, pins, seals, springs, and other small parts.
3) Instructions for cleaning, inspecting, lubricating, and assembling the priority valve and steering unit, replacing worn parts as needed. Tightening torques and hydraulic connections are also provided.
Crown we2000 series forklift parts catalogue manualfjjsekdmme
This document is a parts manual for the WE/WS2000 series. It contains 10 sections that list parts for different systems of the trucks, including covers, frames, hydraulic and electrical components, brakes, and more. Each section includes an index listing part numbers, part names, and quantities of parts required. Product information like model numbers and serial numbers are needed to order replacement parts.
Crown wd2300 s series walkie reach stacker parts catalogue manualfjjsekdmme
This document is a parts manual for a WD2300S series truck. It contains sections that list and describe parts for different systems of the truck, including covers, caster wheels, hydraulic parts, drive systems, electrical systems, brakes, mast/lift structures, cylinders, and the cabin/platform. Diagrams show the layout of hydraulic tubes and hoses. Part numbers are provided to order replacement parts. The manual instructs readers to specify the truck model and serial number to ensure the correct parts are ordered.
Crown wav50 work assit vehicle parts catalogue manualfjjsekdmme
This parts manual provides concise part listings and diagrams for replacing parts on a WAV 50 Series order number 812718-006. It includes 3 sentences or less summaries of each section:
Section 1 covers front chassis parts including the battery, bumpers, and controller mounting plate. Section 2 covers the hydraulic unit. Section 3 covers drive unit parts such as the drive motor and brake assembly. Section 4 covers electrical parts including contactors and switches. Sections 7-10 cover mast, cylinder, platform and miscellaneous parts such as labels and decals.
Crown tsp6000 series turret order picker parts catalogue manualfjjsekdmme
This document is a parts manual for the power unit of a TSP6000 series truck. It contains 30 numbered parts that make up the power unit, listed with their part numbers and the quantity required. Key components included are the power unit enclosure, hinges, screws, nuts, doors, covers, rods, screens, washers, pins and rings.
Crown sx3000 series forklift parts catalogue manualfjjsekdmme
This document is a parts manual for the SX3000 series truck. It contains 10 sections that describe the various parts of the truck. Section 2 covers the hydraulic system, including tube and hose layout diagrams. The diagrams show the routing of hydraulic tubes and hoses between components like the power unit, lift cylinders, and reservoir. Parts are identified by number and include things like tubes, hoses, fittings and cylinders. Torque specifications and required quantities are also provided to aid in repairs or ordering replacements.
Crown st3000 series forklift parts catalogue manualfjjsekdmme
This parts manual provides information on replacement parts for the ST3000 series truck. It contains 10 sections covering various systems of the truck, including covers, outriggers, caster wheels, hydraulics, drive unit, electrical, brakes, mast/lift structure, cylinders, and miscellaneous parts. Each section lists the relevant part numbers, names, and quantities required. Important information is also provided on ordering spare parts and making any modifications to the truck.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
New holland w80 wheel excavator service repair manual
1. W50 - W60
W70 - W80
WHEEL LOADER
Workshop Manual
Print No. 604.13.577 English
V - 2005
THIS ALERT SYMBOL SIGNALS IMPORTANT MESSAGES INVOLVING YOUR SAFETY.
Read and heed carefully the safety instructions listed and follow the precautions recommended to
avoid potential risks and to safeguard your health and your safety.
You will find this symbol in the text of this Manual referred to the following key words:
WARNING - Cautions directed to avoid improper repair interventions involving potential consequences
for the safety of the personnel performing the repairs.
DANGER - These warnings qualify specifically potential dangers for the safety of the operator or other
persons directly or indirectly involved.
IMPORTANT NOTICE
All maintenance and repair interventions explained in this Manual must be performed exclusively by the
Service Organisation of the Manufacturer, observing strictly the instructions explained using, whenever
necessary, the recommended specific tools.
Whoever performs the operations reported without following exactly the precautions is responsible on his own,
for the damages that may result.
Neither the Factory nor any Organisations in its Distribution Network, including but not limited to national,
regional or local distributors, are responsible for any liability arising from any damage resulting from defects
caused by parts and/or components not approved by the Factory for use in maintaining and/or repairing prod-
ucts manufactured or merchandised by the Factory.
In any case, no warranty of any kind is made or shall be imposed with respect to products manufactured or
merchandised by the Factory, when failures are caused by the use of parts and/or components not approved
by the Factory.
3. SECTION 0
SAFETY INSTRUCTIONS
INDICE
SUBJECT
FUNDAMENTAL SAFETY INSTRUCTIONS .....................................................................................
Warnings and symbols.......................................................................................................................
Risks resulting from failure to observe the safety instructions...........................................................
Organizational measures ...................................................................................................................
Selection and qualification of personnel ............................................................................................
OPERATION, SAFETY INSTRUCTIONS..........................................................................................
MAINTENANCE, SAFETY INSTRUCTIONS.....................................................................................
WARNING OF SPECIAL DANGERS.................................................................................................
TRANSPORTING AND TOWING; RECOMMISSIONING .................................................................
REPAIRS, SAFETY INSTRUCTIONS ...............................................................................................
ACCUMULATORS.............................................................................................................................
ENGINE .............................................................................................................................................
WELDING OPERACIONS .................................................................................................................
PAGE
0-1
0-1
0-1
0-1
0-2
0-3
0-4
0-5
0-6
0-7
0-8
0-9
0-10
4. W50 - W60 - W70 - W80 SAFETY INSTRUCTIONS 0 - 1
Carefully read personal and machine SAFETY INSTRUCTIONS (at the beginning of this manual)
FUNDAMENTAL SAFETY INSTRUCTIONS
WARNINGS AND SYMBOLS
Thefollowingsigns are used in the Workshop Manual
to designate exceptionally important information:
RISKS RESULTING FROM FAILURE TO
OBSERVE THE SAFETY INSTRUCTIONS
Precautionary rules and measures
designed to protect the operator and
other persons from life-threatening
hazards or injury and to prevent ex-
tensive damage to property.
Information and precautionary
measures designed to prevent
damage to the machine and other
property.
This wheeled loader has been built
in accordance with state-of-the-art
standards and recognized safety
regulations.
Nevertheless, its use may constitute
a risk if it is still operated despite a
suspected or obvious defect or if it
is inexpertly repaired.
There is then a potential
- risk to life and limb
- risk of the machine and other as-
sets being damaged.
The wheeled loader must be stopped
immediately if suspected or obvious
damage represents a risk to the
safety of the operator, of other per-
sons at the deployment site, or of
other assets.
All components are carefully coordi-
nated. Original parts must be used to
ensure smooth running and a long
service life.
ORGANIZATIONAL MEASURES
The Operation and Maintenance Instruction Manual
must always be at hand at the deployment site of the
machine, e.g. in the container provided.
Inaddition totheOperation and Maintenance Instruc-
tion Manual, observe and instruct the user in all other
generally applicable statutory and other mandatory
regulations relevant to accident prevention and en-
vironmental protection.
These compulsory regulations may also deal, for ex-
ample, with the handling of hazardous substances,
the issuing/wearing of personal protective equip-
ment, or traffic regulations.
The Operation and Maintenance Instruction Manual
must be supplemented by instructions covering the
duties involved in supervising and notifying special
organizational features, such as job organization,
working sequences or deployed personnel.
Thepersonnel assigned to work on the machine must
have read the operating instructions and in particular
the Safety Instructions section before starting work.
Reading the instructions after work has begun is too
late. This applies especially to persons working only
occasionally on the machine, e.g. during setting-up
or servicing.
Check at least occasionally whether the work is being
carried out in compliance with the Operation and
Maintenance Instruction Manual and with attention
being paid to risks and safety factors.
Long hair must be tied back or otherwise secured,
garments must be close-fitting, and no jewellery in-
cluding rings may be worn. Injury may result from
such items being caught up in the machinery or
catching on moving parts.
Use personal protective equipment wherever re-
quired by the circumstances or by law.
Observe all safety instructions and warnings at-
tached to the machine.
See to it that safety instructions and warnings at-
tached to the machine are always complete and per-
fectly legible.
5. 0 - 2 SAFETY INSTRUCTIONS W50 - W60 - W70 - W80
Carefully read personal and machine SAFETY INSTRUCTIONS (at the beginning of this manual)
In the event of safety-relevant modifications or
changes in the behaviour of the machine during op-
eration, stop the machine immediately and report the
malfunction to the competent authority/person.
Never make any modifications, additions or conver-
sions which might affect safety without the supplier’s
approval. This also applies to the installation and ad-
justment of safety devices and valves as well as to
welding work on load- bearing elements.
Spare parts must comply with the technical require-
ments specified by the manufacturer. Spare parts
from original equipment manufacturers can be relied
upon to do so.
Replace hydraulic hoses within stipulated and appro-
priate intervals, even if no safety-relevant defects
have been detected.
Adhere to prescribed intervals or those specified in
the Operation and Maintenance Instruction Manual
for routine checks and inspections.
For the execution of maintenance work, tools and
workshop equipment equal to the task on hand are
absolutely indispensable.
The personnel must be familiar with the location and
operation of fire extinguishers.
Observe all fire-warning and fire-fighting procedures.
SELECTION AND QUALIFICATION OF
PERSONNEL
Any work on / with the machine must be executed by
reliable personnel only. Statutory minimum age limits
must be observed.
Deploy only trained or instructed staff and set out
clearly the individual responsibilities of the personnel
for operation, set-up, maintenance and repair.
Make sure that only authorized personnel works on /
with the machine.
Define the machine operator’s responsibilities – also
with regard to observing traffic regulations giving the
operator the authority to refuse instructions by third
parties that are contrary to safety.
Do not allow persons to be trained or instructed or
persons taking part in a general training course to
work on or with the machine without being perma-
nently supervised by an experienced person.
Work on the electrical system and equipment of the
machine must be carried out only by a skilled elec-
trician or by instructed persons under the supervision
and guidance of a skilled electrician and in accord-
ance with electrical engineering rules and regula-
tions.
Work on chassis, brake and steering systems must
be performed only by skilled personnel specially
trained for such work.
Work on the hydraulic system must be carried out
only by personnel with special knowledge and expe-
rience of hydraulic equipment.
6. W50 - W60 - W70 - W80 SAFETY INSTRUCTIONS 0 - 3
Carefully read personal and machine SAFETY INSTRUCTIONS (at the beginning of this manual)
OPERATION, SAFETY INSTRUCTIONS
Standard operation
Avoid any operational mode that might be prejudicial
to safety.
Before starting work, familiarize yourself with the sur-
roundings and circumstances of the site, such as ob-
stacles in the working and travelling area, the soil
bearingcapacity and any barriersseparatingthecon-
struction site from the public highway.
Take the necessary precautions to ensure that the
machine is used only when in a safe and reliable
state.
Operate the machine only if all protective and safety-
oriented devices, e.g. removable safety devices,
emergency shut-off equipment, sound-proofing ele-
ments and extractors, are in place and fully func-
tional.
Check the machine at least once per working shift
for obvious damage and defects. Report any
changes (incl. changes in the machine’s working be-
haviour) to the competent organization/person im-
mediately. If necessary, stop the machine
immediately and lock it.
In the event of malfunctions, stop the machine im-
mediately and lock it. Have any defects rectified im-
mediately.
Start the machine from the driver’s seat only.
During start-up and shut-down procedures always
watch the indicators in accordance with the Opera-
tion and Maintenance Instruction Manual.
Before setting the machine in motion, make sure that
nobody is at risk.
Before starting work or travelling with the machine,
check that the braking, steering, signalling and
lighting systems are fully functional.
Before setting the machine in motion always check
that the accessories have been safely stowed away.
When travelling on public roads, ways and places,
always observe the valid traffic regulations and, if
necessary, make sure beforehand that the machine
is in a condition compatible with these regulations.
In conditions of poor visibility and after dark always
switch on the lighting system.
Persons accompanying the driver must be seated on
the passenger seats provided for this purpose.
When driving through underpasses or tunnels, over
bridges or under overhead lines, always make sure
that there is sufficient clearance.
Always keep at a distance from the edges of building
pits and slopes.
Avoid any operation that might be a risk to machine
stability.
Never travel across slopes; always keep the working
equipment and the load close to the ground, espe-
cially when travelling downhill.
On sloping terrain always adapt your travelling speed
to the prevailing ground conditions. Never change to
a lower gear on a slope but always before reaching it.
Before leaving the driver’s seat always secure the
machine against inadvertent movement and unau-
thorized use. Shut off the engine.
7. 0 - 4 SAFETY INSTRUCTIONS W50 - W60 - W70 - W80
Carefully read personal and machine SAFETY INSTRUCTIONS (at the beginning of this manual)
MAINTENANCE, SAFETY INSTRUCTIONS
Observe the adjusting, maintenance and inspection
activities and intervals set out in the Operation and
Maintenance Instruction Manual, including informa-
tion on the replacement of parts and equipment.
These activities may be executed by skilled per-
sonnel only.
Brief operating personnel before beginning special
operations and maintenance work, and appoint a
person to supervise the activities.
In any work concerning the operation, conversion or
adjustment of the machine and its safety-oriented de-
vices or any work related to maintenance, inspection
and repair, always observe the start-up and shut-
down procedures set out in the Operation and Main-
tenance Instruction Manual and the information on
maintenance work.
Ensure that the maintenance area is adequately se-
cured.
If the machine is completely shut down for mainte-
nance and repair work, it must be secured against
inadvertent starting by:
- removing the ignition key and
- attaching a warning sign.
Carry out maintenance and repair work only if the
machine is positioned on stable and level ground and
has been secured against inadvertent movement
and buckling.
To avoid the risk of accidents, individual parts and
large assemblies being moved for replacement pur-
poses should be carefully attached to lifting tackle
and secured. Use only suitable and technically per-
fect lifting gear and suspension systems with ade-
quate lifting capacity. Never work or stand under
suspended loads.
The fastening of loads and the instructing of crane
operators should be entrusted to experienced per-
sons only. The marshaller giving the instructions
must be within sight or sound of the operator.
For carrying out overhead assembly work always use
specially designed or otherwise safety-oriented lad-
ders and working platforms. Never use machine
parts as a climbing aid.
Wear a safety harness when carrying out mainte-
nance work at greater heights.
Keep all handles, steps, handrails, platforms, land-
ings and ladders free from dirt, snow and ice.
Clean the machine, especially connections and
threaded unions, of any traces of oil, fuel or preserv-
atives before carrying out maintenance/repair work.
Never use aggressive detergents. Use lint-free
cleaning rags.
Before cleaning the machine with water, steam jet
(high-pressure cleaning) or detergents, cover or tape
up all openings which have to be protected against
water, steam or detergent penetration for safety and
functional reasons. Special care must be taken with
electric motors and switchgear cabinets.
Ensure during cleaning of the machine that the tem-
perature sensors of the fire-warning and fire-fighting
systems do not come into contact with hot cleaning
agents as this might activate the extinguishing
system.
After cleaning, remove all covers and tapes applied
for that purpose.
After cleaning, examine all fuel, lubricant, and hy-
draulic fluid lines for leaks, loose connections, chafe
marks and damage. Any defects found must be rec-
tified without delay.
Always tighten any screwed connections that have
been loosened during maintenance and repair work.
Any safety devices removed for set-up, maintenance
or repair purposes must be refitted and checked im-
mediately upon completion of the maintenance and
repair work.
Ensure that all consumables and replaced parts are
disposed of safely and with minimum environmental
impact.
8. W50 - W60 - W70 - W80 SAFETY INSTRUCTIONS 0 - 5
Carefully read personal and machine SAFETY INSTRUCTIONS (at the beginning of this manual)
WARNING OF SPECIAL DANGERS
Electric energy
Use only original fuses with the specified current
rating. Switch off the machine immediately if trouble
occurs in the electrical system.
When working with the machine, maintain a safe dis-
tance from overhead electric lines. If work is to be
carried out close to overhead lines, the working
equipment must be kept well away from them. Cau-
tion: life-threatening danger! Check out the pre-
scribed safety distances.
If your machine comes into contact with a live wire
- Do not leave the machine.
- Drive the machine outof the hazard zone and warn
others against approaching and touching the ma-
chine.
- Have the live wire de-energized.
- Do not leave the machine until the damaged line
has been de-energized with certainty.
The electrical equipment of machines is to be in-
spected and checked at regular intervals. Defects
such as loose connections or scorched cables must
be rectified immediately.
Gas, dust, steam and smoke
Operate internal combustion engines and fuel-oper-
ated heating systems only on adequately ventilated
premises. Before starting the machine on enclosed
premises, make sure that there is sufficient ventila-
tion.
Observe the regulations in force at the respective
site.
Carry out welding, flame-cutting and grinding work
on the machine only if this has been expressly au-
thorized, as there may be a risk of explosion and fire.
Before carrying out welding, flame-cutting and
grinding operations, clean the machine and its sur-
roundings of dust and other inflammable substances
and make sure that the premises are adequately ven-
tilated. RISK OF EXPLOSION.
Hydraulic and pneumatic equipment
Check all lines, hoses and screwed connections reg-
ularly for leaks and obvious damage. Repair damage
immediately. Splashed oil may cause injury and fire.
Depressurize all system sections and pressure pipes
(hydraulic system, compressed-air system) to be
opened in accordance with the specific instructions
for the unit concerned before carrying out any repair
work.
Hydraulic and compressed-air lines must be laid and
fitted properly. Ensure that no connections are inter-
changed. The fittings, lengths and quality of the
hoses must comply with the technical requirements.
Noise
During operation, all sound baffles of the machine
must be closed.
Always wear the prescribed ear protectors.
Oil, grease and other chemical substances
When handling oil, grease and other chemical sub-
stances, observe the product- related safety regula-
tions.
Be careful when handling hot consumables (risk of
burning or scalding).
9. 0 - 6 SAFETY INSTRUCTIONS W50 - W60 - W70 - W80
Carefully read personal and machine SAFETY INSTRUCTIONS (at the beginning of this manual)
TRANSPORTING AND TOWING;
RECOMMISSIONING
The machine must be towed, loaded and transported
only in accordance with the Operation and Mainte-
nance Instruction Manual.
For towing the machine observe the prescribed
transport position, admissible speed and route.
Use only appropriate means of transport and lifting
gear of adequate capacity.
The recommissioning procedure must be strictly in
accordance with the Operation and Maintenance In-
struction Manual.
10. W50 - W60 - W70 - W80 SAFETY INSTRUCTIONS 0 - 7
Carefully read personal and machine SAFETY INSTRUCTIONS (at the beginning of this manual)
REPAIRS, SAFETY INSTRUCTIONS
OPERATION AND MAINTENANCE
INSTRUCTION MANUAL
Never start repair work without
having read and understood the Op-
eration and Maintenance Instruction
Manual.
Pay special attention to:
"Fundamental Safety Instructions",
"Inspection and Servicing, Safety In-
structions"
and all warning and instruction signs
attached to the machine.
The descriptions of operational se-
quences are designed for experi-
enced personnel only.
Always keep the Operation and Main-
tenance Instruction Manual with the
machine.
REPAIR PERSONNEL
Repair personnel must have know-
how and experience relevant to the
repair of this or comparable ma-
chines.
Inexperienced personnel must be
thoroughly trained by experienced
repair personnel.
BLOCKING THE PIVOT JOINT
When carrying out repair work in the
pivot range, block the pivot joint. Re-
move the block on completing work.
PRETENSIONED UNITS
Never open damaged pretensioned
units but replace them as complete
units.
Open them only in exceptional cases
where the system and the working
sequence are exactly known and the
necessary special tools are avail-
able.
The Operation and Maintenance In-
struction Manual contains no rele-
vant information.
DISMANTLING COMPONENTS
Never dismantle components while
the machine is still at operating tem-
perature.
Oils, greases, brake fluid or coolant
may have a high temperature and
thus result in burning or scalding.
Wait for the machine to cool down.
Depressurize pipelines and hoses,
cylinders, radiator, hydraulic tank,
compressed air reservoir and other
systems or units before starting
work.
Replace defective components in
good time to prevent greater
damage.
Clean the defective component care-
fully before dismantling it. Mark dis-
mantled components in the correct
sequence to facilitate installation.
When dismantling the component,
close exposed hose and pipe con-
nections, open boreholes and hous-
ings with care to prevent dirt from
penetrating.
11. 0 - 8 SAFETY INSTRUCTIONS W50 - W60 - W70 - W80
Carefully read personal and machine SAFETY INSTRUCTIONS (at the beginning of this manual)
NEVER REMOVE LEAD SEALS
Never change the rated pressure of
pressure-reducing valves without
the explicit authorization of the
Service department.
Never remove lead seals from pres-
sure-reducing valves and accumula-
tors.
AFTER REPAIR WORK
To prevent corrosion, coat all bright
metal machine components with a
grease film.
On completing the work, reassemble
all protective devices, covers, and
sound- and vibration-insulation ma-
terial.
Never start up the driving motor
while work is being done on the ma-
chine.
Check the repaired components and
all machine functions with a trial run.
Never release the machine for re-
commissioning until it is fully func-
tioning.
ACCUMULATORS
Safety Instructions
Accumulators are installed in the hy-
draulic system. These accumulators
contain nitrogen under high initial
pressure.
Even when the hydraulic pressure in
the system is reduced, the nitrogen
remains in the accumulator.
The accumulators are completely
safe in operation. If incorrectly han-
dled, however, there is a risk of ex-
plosion.
Therefore:
- Never handle accumulators me-
chanically, never weld or solder
them.
- Testing and servicing work must be
carried out by experts only.
- Prior to any testing and servicing
work, depressurize the hydraulic
part of the system.
- To dismantle the accumulator, al-
ways wear eye protection and
working gloves.
- Fill accumulators with nitrogen
only, never with compressed air or
oxygen.
- Report any defects or damage to
the machine owner without delay.
- Prior to recommissioning, an in-
spection by a specialist or expert is
essential if the accumulator has
been damaged or if the admissible
operating temperature or operating
pressure has been exceeded.
Never remove or paint over warning
and information plates, rating plates
or type identification markings. Re-
place illegible or damaged plates im-
mediately.
12. W50 - W60 - W70 - W80 SAFETY INSTRUCTIONS 0 - 9
Carefully read personal and machine SAFETY INSTRUCTIONS (at the beginning of this manual)
ENGINE
Engine, repair instructions
Before working on the engine, read
and observe: "Repair, safety instruc-
tions" and the Operation and Mainte-
nance Instruction Manual for the
engine.
Risk of injury from rotating or hot en-
gine components.
Shut off the engine and wait for it to
cool down.
Do repair work only if the machine is
secured as described under "Se-
curing the machine" in Operation
and Maintenance Instruction
Manual.
Check and replace V-belts only when
the engine is stationary.
Repair work on the engine demands
extensive know-how and special
tools.
If in doubt, have the repair work car-
ried out by the Service Dept. or by
your local dealer.
Assisted starting (with jumper cables), safety
instructions
EXPLOSION HAZARD
Battery gases contain hydrogen and
are highly flammable. Keep potential
ignition sources such as unshielded
lights or lighted cigarettes away from
the batteries.
Risk of injury from acid splashes and
battery gases.
Never lean over the batteries when
starting the machine from another
vehicle.
Wear goggles.
Never use assisted starting if the bat-
teries are defective or frozen.
Never connect batteries (battery as-
semblies) unless they have the same
voltage.
Use only tested jumper cables with
insulated terminal clips and an ade-
quate lead diameter.
Ensure that the bodies of the sup-
plying and receiving machines are
not in contact. Otherwise a current
flow could result from connecting
the positive poles. Risk of short-
circuiting.
Neveruseassistedstartinginvolving
overvoltage, e.g. two or three bat-
teries connected in series or auxil-
iary devices generating higher
voltages than 12V.
Never use welding generators or
welding transformers as a source of
current.
Position the jumper cables in such a
way that they cannot be caught by
rotating engine components.
Read and observe: "Inspection and
Servicing, Safety Instructions",
paying special attention to the sec-
tion "Handling batteries".
13. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
14. 0 - 10 SAFETY INSTRUCTIONS W50 - W60 - W70 - W80
Carefully read personal and machine SAFETY INSTRUCTIONS (at the beginning of this manual)
WELDING OPERATIONS
Welding Operations, safety instructions
Never perform welding operations
unless you are qualified to do so.
Observetheaccidentpreventionreg-
ulations.
Any work on receptacles that contain
or have contained substances:
- which are combustible or which en-
courage combustion,
- which are susceptible to explosion,
or
- which may develop health-haz-
ardous gases, vapours, mist or
dust during welding operations,
mustbe carriedoutonlyunderexpert
supervision and only by experienced
persons authorized to do such work.
Should you have any problems or
queries, apply to the Service depart-
ment.
Prior to any welding operations on
the machine:
- Disconnect the battery, first at the
negative terminal and then at the
positive terminal.
- Disconnect the positive terminal at
the alternator.
- Protect the disconnected terminals
and plugs from short-circuiting and
soiling by covering them with foil
or adhesive tape.
Apply the welding current terminals
very close to the welding point.
Theweldingcurrentmustnotflowvia
the ball bearing slewing rim, via pin
couplings or link joints of hydraulic
cylinders.
On completion of the welding opera-
tion, restore all electrical connec-
tions.
When connecting the battery, first
connect the positive terminal and
then the negative terminal.
15. SECTION 1
SERVICE DATA
INDEX
PARAGRAPH
1.1
1.2
1.2.2
1.2.3
1.2.4
1.3
1.3.1
1.3.2
1.3.3
1.3.4
1.3.5
1.3.6
1.3.7
1.3.8
1.3.9
1.3.10
1.3.11
1.3.12
1.3.13
1.3.14
1.4
1.4.1
1.4.2
1.4.3
1.4.4
1.5
1.5.1
1.5.2
1.5.3
1.5.4
1.5.5
1.5.6
1.5.7
1.5.8
1.6
1.6.1
1.6.2
1.6.3
1.6.4
1.6.5
1.6.6
1.6.7
SUBJECT
FOREWORD ...........................................................................................................
SI- AND ADDITIONAL UNITS .................................................................................
Quantities of Space and Mass.................................................................................
Time related Quantities............................................................................................
Quantities of force, energy and power.....................................................................
CONVERSIONS TABLES .......................................................................................
Conversion for units of legth....................................................................................
Conversion for units of area.....................................................................................
Conversion from foot and inch to metric mesures ...................................................
Conversion from newtonmeter (Nm) into foot pounds (ft lb)....................................
Conversion table for units of pressure in gases, steam and fluid ...........................
Conversion table for units of power, energy and heat quantity................................
Conversion table for units of mechanical stress ......................................................
Practically equivalent units for pressure and mechanical stress (stregth)...............
Units of temperature and conversion formulars.......................................................
Power, Energy and heat flow...................................................................................
Speed .....................................................................................................................
Units of mass (weight) .............................................................................................
Units of volume, flow rates.......................................................................................
Fuel consumption ....................................................................................................
CALCULATION EXAMPLES ..................................................................................
Angles of Slope........................................................................................................
Hydraulic outputs (pumps/motors)...........................................................................
Stroking times of cylinders.......................................................................................
Speeds of hydraulic motors .....................................................................................
TIGHTENING TORQUES........................................................................................
General information .................................................................................................
Units of measurement..............................................................................................
Bolts with standard thread DIN 13 - 13....................................................................
Bolts with metric fine thread DIN 13 - 13 .................................................................
O&K Double - hex. bolts ..........................................................................................
O&K Double - hex. necked - down bolts..................................................................
Tightening torques for SAE flange-system ..............................................................
Tightening angles ....................................................................................................
TECHNICAL DATA..................................................................................................
Engine .....................................................................................................................
Axles and gearboxes - W50 ....................................................................................
Axles and gearboxes - W60 - W70 - W80 ...............................................................
Hydraulic system .....................................................................................................
Fluids and lubricants................................................................................................
Tightening torques...................................................................................................
Weights....................................................................................................................
PAGE
1-1
1-2
1-2
1-3
1-4
1-5
1-5
1-5
1-6
1-7
1-15
1-15
1-15
1-16
1-16
1-17
1-18
1-19
1-20
1-21
1-22
1-22
1-23
1-23
1-24
1-25
1-25
1-25
1-26
1-27
1-28
1-29
1-30
1-30
1-31
1-31
1-32
1-33
1-34
1-40
1-43
1-44