1. Disconnect wiring harnesses, condenser hoses (if equipped), and remove engine hood to access the engine.
2. Remove right and left engine grids by removing mounting bolts.
3. Drain hydraulic system and bleed accumulators before performing any service work.
New Holland TC5080 Hillside Combine Harvesters Service Repair Manual 1.pdffusekdmdmded
The document provides service information for engines and various components of agricultural combines.
It includes sections on the engine, clutch, transmission, front and rear axle systems, brakes, hydraulic systems, electrical systems, attachments and headers, product feeding, threshing, separation, cleaning, and the cab.
Technical data, functional descriptions, diagnostic information and service procedures are provided for mechanical, electrical and hydraulic components. Fault codes and troubleshooting information is also included for electrical systems.
New Holland TC5060 Combine Harvesters Service Repair Manual.pdffusekdmdmded
The document provides service information for various tractor models. It includes:
- An introduction section outlining the manual's contents and how to navigate it.
- Individual sections covering different vehicle systems like the engine, transmission, brakes, hydraulics and electrical systems.
- Chapters within each section detailing the technical, functional, diagnostic and service data for components of that system.
- Illustrations, diagrams and step-by-step instructions for removing and installing parts.
The manual is intended as a technical reference for carrying out maintenance and repairs according to the manufacturer's specifications.
New Holland TC5050 Hillside Combine Harvesters Service Repair Manual.pdffusekdmdmded
The primary hydraulic power system for the TC5000 combine includes multiple pumps that supply hydraulic fluid to various systems through a valve stack. The main components are two or three hydraulic pumps, an oil tank, filter, accumulator, lift cylinders, steering valve and cylinders, and controls for the header and other attachments.
New Holland TC5080 Combine Harvesters Service Repair Manual.pdffusekdmdmded
The document provides service information for engines and various components of agricultural combines.
It includes sections on the engine, clutch, transmission, front and rear axle systems, brakes, hydraulic systems, electrical systems, attachments and headers, product feeding, threshing, separation, cleaning, and the cab.
Technical data, functional descriptions, diagnostic information and service procedures are provided for mechanical, electrical and hydraulic components. Fault codes and troubleshooting information is also included for electrical systems.
New Holland TC5040 Hillside Combine Harvesters Service Repair Manual.pdffusekdmdmded
The primary hydraulic power system for the TC5000 combine includes multiple pumps that supply hydraulic fluid to various systems through a valve stack. The main components are two or three hydraulic pumps, an oil tank, filter, accumulator, lift cylinders, steering valve and cylinders, and controls for the header and other attachments.
New Holland TC5060 Combine Harvesters Service Repair Manual 1.pdffusekdmdmded
The air compressor supplies compressed air to the reservoir tank to provide a source of compressed air for cleaning and tire inflation. It is a single cylinder, gear-driven compressor mounted directly to the engine. Engine oil lubricates the compressor. The compressed air relief valve protects the system from pressures over 8 bar by venting excess pressure. It can be removed by draining the air and coolant lines, loosening connections, and removing mounting bolts and nuts.
New Holland TC5050 Combine Harvesters Service Repair Manual.pdffusekdmdmded
The document provides service information for engines and various components of agricultural combines.
It includes sections on the engine, clutch, transmission, front and rear axle systems, brakes, hydraulic systems, electrical systems, attachments and headers, product feeding, threshing, separation, cleaning, and the cab.
The sections contain technical data, descriptions of component function, diagnostic data including fault codes, and procedures for removal and installation of components.
New Holland TC5040 Combine Harvesters Service Repair Manual.pdffusekdmdmded
The document provides service information for engines and various components of agricultural combines.
It includes sections on the engine, clutch, transmission, front and rear axle systems, brakes and controls, hydraulic systems, electrical systems, attachments and headers, product feeding, threshing, separation, residue handling, cleaning, and the cab.
Technical data, functional descriptions, diagnostic information, and service procedures are provided for components like the engine air compressor, clutch hydraulic control, gearbox, hydrostatic drive, brakes, hydraulic pumps and valves, electrical modules, reel, feed rollers, threshing drum, straw walkers, cleaning systems and more.
New Holland TC5080 Hillside Combine Harvesters Service Repair Manual 1.pdffusekdmdmded
The document provides service information for engines and various components of agricultural combines.
It includes sections on the engine, clutch, transmission, front and rear axle systems, brakes, hydraulic systems, electrical systems, attachments and headers, product feeding, threshing, separation, cleaning, and the cab.
Technical data, functional descriptions, diagnostic information and service procedures are provided for mechanical, electrical and hydraulic components. Fault codes and troubleshooting information is also included for electrical systems.
New Holland TC5060 Combine Harvesters Service Repair Manual.pdffusekdmdmded
The document provides service information for various tractor models. It includes:
- An introduction section outlining the manual's contents and how to navigate it.
- Individual sections covering different vehicle systems like the engine, transmission, brakes, hydraulics and electrical systems.
- Chapters within each section detailing the technical, functional, diagnostic and service data for components of that system.
- Illustrations, diagrams and step-by-step instructions for removing and installing parts.
The manual is intended as a technical reference for carrying out maintenance and repairs according to the manufacturer's specifications.
New Holland TC5050 Hillside Combine Harvesters Service Repair Manual.pdffusekdmdmded
The primary hydraulic power system for the TC5000 combine includes multiple pumps that supply hydraulic fluid to various systems through a valve stack. The main components are two or three hydraulic pumps, an oil tank, filter, accumulator, lift cylinders, steering valve and cylinders, and controls for the header and other attachments.
New Holland TC5080 Combine Harvesters Service Repair Manual.pdffusekdmdmded
The document provides service information for engines and various components of agricultural combines.
It includes sections on the engine, clutch, transmission, front and rear axle systems, brakes, hydraulic systems, electrical systems, attachments and headers, product feeding, threshing, separation, cleaning, and the cab.
Technical data, functional descriptions, diagnostic information and service procedures are provided for mechanical, electrical and hydraulic components. Fault codes and troubleshooting information is also included for electrical systems.
New Holland TC5040 Hillside Combine Harvesters Service Repair Manual.pdffusekdmdmded
The primary hydraulic power system for the TC5000 combine includes multiple pumps that supply hydraulic fluid to various systems through a valve stack. The main components are two or three hydraulic pumps, an oil tank, filter, accumulator, lift cylinders, steering valve and cylinders, and controls for the header and other attachments.
New Holland TC5060 Combine Harvesters Service Repair Manual 1.pdffusekdmdmded
The air compressor supplies compressed air to the reservoir tank to provide a source of compressed air for cleaning and tire inflation. It is a single cylinder, gear-driven compressor mounted directly to the engine. Engine oil lubricates the compressor. The compressed air relief valve protects the system from pressures over 8 bar by venting excess pressure. It can be removed by draining the air and coolant lines, loosening connections, and removing mounting bolts and nuts.
New Holland TC5050 Combine Harvesters Service Repair Manual.pdffusekdmdmded
The document provides service information for engines and various components of agricultural combines.
It includes sections on the engine, clutch, transmission, front and rear axle systems, brakes, hydraulic systems, electrical systems, attachments and headers, product feeding, threshing, separation, cleaning, and the cab.
The sections contain technical data, descriptions of component function, diagnostic data including fault codes, and procedures for removal and installation of components.
New Holland TC5040 Combine Harvesters Service Repair Manual.pdffusekdmdmded
The document provides service information for engines and various components of agricultural combines.
It includes sections on the engine, clutch, transmission, front and rear axle systems, brakes and controls, hydraulic systems, electrical systems, attachments and headers, product feeding, threshing, separation, residue handling, cleaning, and the cab.
Technical data, functional descriptions, diagnostic information, and service procedures are provided for components like the engine air compressor, clutch hydraulic control, gearbox, hydrostatic drive, brakes, hydraulic pumps and valves, electrical modules, reel, feed rollers, threshing drum, straw walkers, cleaning systems and more.
New Holland L228 TIER 4B (FINAL) North America Skid Steer Loader Service Repa...fusekdmdmded
The document provides service information for New Holland skid steer loaders and compact track loaders, including:
- A parts manual for engines, power couplings, axles, hydraulics, frames, wheels, tracks, electrical systems, and other components
- Procedures for draining fluids, removing the engine, radiator, and other components for service or replacement
- Specifications for tightening torques and replacement of parts
New Holland TC5070 Combine Harvesters Service Repair Manual 1.pdffusekdmdmded
The air compressor supplies compressed air to the reservoir tank to provide a source of compressed air for cleaning and tire inflation. It is a single cylinder, gear-driven compressor mounted directly to the engine. Engine oil lubricates the compressor. The compressed air relief valve protects the system from pressures over 8 bar by venting excess pressure. It can be removed by draining the air and coolant lines, loosening connections, and removing mounting bolts and nuts.
New Holland TC5080 Combine Harvesters Service Repair Manual 1.pdffusekdmdmded
The air compressor supplies compressed air to the reservoir tank to provide a source of compressed air for cleaning and tire inflation. It is a single cylinder, gear-driven compressor mounted directly to the engine. Engine oil lubricates the compressor. The compressed air relief valve protects the system from pressures over 8 bar by venting excess pressure. It can be removed by draining the air and coolant lines, loosening connections, and removing mounting bolts and nuts.
New Holland L228 TIER 4B (FINAL) Europe Skid Steer Loader Service Repair Manu...fusekdmdmded
The document provides service information for New Holland skid steer loaders and compact track loaders with Tier 4B diesel engines, including removal procedures for major engine components. It describes disconnecting hoses and electrical connections, removing covers, shrouds, and mounting hardware, and using lifting equipment to remove items like the engine, radiator, and muffler. The goal is to safely prepare the engine for maintenance or replacement while following safety precautions.
New Holland CX5090 Laterale Tier 4 Combine Harvester Service Repair Manual.pdffusekdmdmded
The document is a service manual that provides information on hydraulic, pneumatic, electrical, and electronic systems for CX5000 and CX6000 series equipment. It includes:
- Specifications and torque values for hydraulic fittings and connections
- Details on the primary hydraulic power system, including pump specifications and a hydraulic schematic diagram
- Images showing the location of hydraulic components on the front of the machine
The manual provides technical data, diagrams, and images to support servicing the machine's distribution systems. It gives specifications for hydraulic components and diagrams the hydraulic circuit, locating key components.
New Holland CX5090 Tier 4 Combine Harvester Service Repair Manual.pdffusekdmdmded
This document is a service manual for CX5000 and CX6000 series machines. It contains sections covering the machine's hydraulic, pneumatic, electrical and electronic systems, engines, transmissions, axles, brakes, steering, frames, cabs, user platforms, environmental controls, lifting and leveling systems, and crop processing functions. Each section contains technical data, descriptions of functionality, diagnostic information, and service procedures for the machine's components and systems.
New Holland TC5060 Hillside Combine Harvesters Service Repair Manual.pdffusekdmdmded
The primary hydraulic power system for the TC5000 combine includes multiple pumps that supply hydraulic fluid to various systems through a valve stack. The main components are two or three hydraulic pumps, an oil tank, filter, accumulator, lift cylinders, steering valve and cylinders, and controls for the header, reel, and unloading auger. Lateral flotation components are included for optional equipment.
New Holland L221 TIER 4B Final [NEM479941- ]North America Skid Steer Loader S...fusekdmdmded
The document provides service information for New Holland skid steer loaders and compact track loaders with Tier 4B diesel engines, including removal procedures for major engine components. It describes disconnecting hoses and electrical connections, removing covers, shrouds, and mounting hardware, and using lifting equipment to remove items like the engine, radiator, and muffler. The goal is to safely prepare the engine for maintenance or replacement while following safety precautions.
New Holland L223 TIER 4 Skid Steer Loader Service Repair Manual [NDM474381 - ...fusekdmdmded
This service manual provides instructions for servicing engines and components for New Holland 200 Series Skid Steer Loaders and Compact Track Loaders including removing the engine by draining fluids, disconnecting electrical connections and hoses, removing covers and cooling components, and then removing mounting hardware and the engine hood. Specific models and replacement part numbers are listed. Safety warnings are provided throughout regarding personal safety and relieving pressure before disconnecting lines.
New Holland CX5090 Tier 3 Combine Harvester Service Repair Manual.pdffusekdmdmded
The document is a service manual that provides information on hydraulic, pneumatic, electrical, and electronic systems for CX5000 and CX6000 series equipment. It includes:
- Specifications and torque values for hydraulic fittings and connections.
- Details on the primary hydraulic system, including pump specifications and a hydraulic schematic diagram labeling key components.
- Images showing the location of hydraulic components such as the header quick-release coupler, lateral float cylinder, header lift cylinders, and straw elevator.
New Holland L225 TIER 4 Skid Steer Loader Service Repair Manual [NDM461085 - ...fusekdmdmded
This service manual provides instructions for servicing engines and components for New Holland 200 Series Skid Steer Loaders and Compact Track Loaders including removing the engine by draining fluids, disconnecting electrical connections and hoses, removing covers and cooling components, and then removing mounting hardware and the engine hood. Specific models and replacement part numbers are listed. Safety warnings are provided throughout regarding personal safety and relieving pressure before disconnecting lines.
New Holland W60C ZB Tier 4B (final) Compact Wheel Loader Service Repair Manua...fusekdmdmded
1. Disconnect wiring harnesses, condenser hoses (if equipped), and rear lights. Remove engine hood and grille.
2. Drain air conditioning system (if equipped) and disconnect fan connector. Remove condenser.
3. Put battery main switch in OFF position. Remove engine by disconnecting mounting bolts after preparing hydraulic system.
New Holland CX5090 Hillside Tier 4 Combine Harvester Service Repair Manual.pdffusekdmdmded
The document is a service manual that provides information on hydraulic, pneumatic, electrical, and electronic systems for CX5000 and CX6000 series equipment. It includes:
- Specifications and torque values for hydraulic fittings and connections.
- Details on the primary hydraulic system, including specifications for the main, steering, and lateral flotation pumps.
- Schematics and diagrams showing the layout of the hydraulic system and location of key components.
New Holland CX740 Combine Harvesters Service Repair Manual.pdffusekdmdmded
The document provides details on the primary hydraulic power system for New Holland CX combine harvesters. It includes a closed-center load sensing variable displacement pump that supplies oil to circuits for steering, header height control, straw elevator functions, lateral flotation control, reel adjustment, and unloading tube control. Key components are labeled in diagrams and their functions are described.
New Holland TC5070 Hillside Combine Harvesters Service Repair Manual 1.pdffusekdmdmded
The document provides service information for engines and various components of agricultural combines.
It includes sections on the engine, clutch, transmission, front and rear axle systems, brakes and controls, hydraulic systems, electrical systems, attachments and headers, product feeding, threshing, separation, residue handling, cleaning, and the cab.
Technical data, functional descriptions, diagnostic information, and service procedures are provided for mechanical, electrical and hydraulic components. Fault codes and troubleshooting information is also included for electrical systems.
New Holland CX760 Combine Harvesters Service Repair Manual.pdffusekdmdmded
The document provides details on the primary hydraulic power system for a New Holland combine. It includes a closed-center load sensing variable displacement pump that supplies oil to circuits for steering, header height control, straw elevator functions, lateral flotation control, reel adjustment, and unloading tube control. Key components described are the hydraulic pump, priority valve, filters, control valves, motors, cylinders, and accumulators that make up the high-pressure circuit.
New Holland CX5080 Tier 4 Combine Harvester Service Repair Manual.pdffusekdmdmded
The document is a service manual that provides information on hydraulic, pneumatic, electrical, and electronic systems for CX5000 and CX6000 series equipment. It includes:
- Specifications and torque values for hydraulic fittings and connections.
- Details on the primary hydraulic system, including specifications for the main, steering, and lateral flotation pumps.
- Schematics and diagrams showing the layout of the hydraulic system and location of key components.
New Holland CX820 Combine Harvesters Service Repair Manual.pdffusekdmdmded
The document provides details on the primary hydraulic power system for a New Holland combine. It includes a closed-center load sensing variable displacement pump that supplies oil to circuits for steering, header height control, straw elevator functions, lateral flotation control, reel adjustment, and unloading tube control. Key components described are the hydraulic pump, priority valve, filters, control valves, motors, cylinders, and accumulators that make up the high-pressure circuit.
New Holland TC5080 Hillside Combine Harvesters Service Repair Manual.pdffusekdmdmded
This service manual provides information on servicing TC5040, TC5050, TC5060, TC5070, TC5080, and TC5080 Hillside combines. The manual is divided into sections covering the combines' distribution systems, power train, travelling systems, body and structure, tool positioning, and crop processing systems. Each section contains technical data, functional descriptions, diagnostics, and service procedures for the machines' mechanical, electrical, hydraulic, and electronic components.
New Holland TC5070 Hillside Combine Harvesters Service Repair Manual.pdffusekdmdmded
The primary hydraulic power system for the combines includes multiple pumps that supply hydraulic fluid to various systems through a valve stack. The main components are the hydraulic pumps, oil tank, filters, valves, cylinders, and accumulators. Hydraulic flow is distributed to functions like the header, steering, and optional lateral flotation systems.
New Holland L228 TIER 4B (FINAL) North America Skid Steer Loader Service Repa...fusekdmdmded
The document provides service information for New Holland skid steer loaders and compact track loaders, including:
- A parts manual for engines, power couplings, axles, hydraulics, frames, wheels, tracks, electrical systems, and other components
- Procedures for draining fluids, removing the engine, radiator, and other components for service or replacement
- Specifications for tightening torques and replacement of parts
New Holland TC5070 Combine Harvesters Service Repair Manual 1.pdffusekdmdmded
The air compressor supplies compressed air to the reservoir tank to provide a source of compressed air for cleaning and tire inflation. It is a single cylinder, gear-driven compressor mounted directly to the engine. Engine oil lubricates the compressor. The compressed air relief valve protects the system from pressures over 8 bar by venting excess pressure. It can be removed by draining the air and coolant lines, loosening connections, and removing mounting bolts and nuts.
New Holland TC5080 Combine Harvesters Service Repair Manual 1.pdffusekdmdmded
The air compressor supplies compressed air to the reservoir tank to provide a source of compressed air for cleaning and tire inflation. It is a single cylinder, gear-driven compressor mounted directly to the engine. Engine oil lubricates the compressor. The compressed air relief valve protects the system from pressures over 8 bar by venting excess pressure. It can be removed by draining the air and coolant lines, loosening connections, and removing mounting bolts and nuts.
New Holland L228 TIER 4B (FINAL) Europe Skid Steer Loader Service Repair Manu...fusekdmdmded
The document provides service information for New Holland skid steer loaders and compact track loaders with Tier 4B diesel engines, including removal procedures for major engine components. It describes disconnecting hoses and electrical connections, removing covers, shrouds, and mounting hardware, and using lifting equipment to remove items like the engine, radiator, and muffler. The goal is to safely prepare the engine for maintenance or replacement while following safety precautions.
New Holland CX5090 Laterale Tier 4 Combine Harvester Service Repair Manual.pdffusekdmdmded
The document is a service manual that provides information on hydraulic, pneumatic, electrical, and electronic systems for CX5000 and CX6000 series equipment. It includes:
- Specifications and torque values for hydraulic fittings and connections
- Details on the primary hydraulic power system, including pump specifications and a hydraulic schematic diagram
- Images showing the location of hydraulic components on the front of the machine
The manual provides technical data, diagrams, and images to support servicing the machine's distribution systems. It gives specifications for hydraulic components and diagrams the hydraulic circuit, locating key components.
New Holland CX5090 Tier 4 Combine Harvester Service Repair Manual.pdffusekdmdmded
This document is a service manual for CX5000 and CX6000 series machines. It contains sections covering the machine's hydraulic, pneumatic, electrical and electronic systems, engines, transmissions, axles, brakes, steering, frames, cabs, user platforms, environmental controls, lifting and leveling systems, and crop processing functions. Each section contains technical data, descriptions of functionality, diagnostic information, and service procedures for the machine's components and systems.
New Holland TC5060 Hillside Combine Harvesters Service Repair Manual.pdffusekdmdmded
The primary hydraulic power system for the TC5000 combine includes multiple pumps that supply hydraulic fluid to various systems through a valve stack. The main components are two or three hydraulic pumps, an oil tank, filter, accumulator, lift cylinders, steering valve and cylinders, and controls for the header, reel, and unloading auger. Lateral flotation components are included for optional equipment.
New Holland L221 TIER 4B Final [NEM479941- ]North America Skid Steer Loader S...fusekdmdmded
The document provides service information for New Holland skid steer loaders and compact track loaders with Tier 4B diesel engines, including removal procedures for major engine components. It describes disconnecting hoses and electrical connections, removing covers, shrouds, and mounting hardware, and using lifting equipment to remove items like the engine, radiator, and muffler. The goal is to safely prepare the engine for maintenance or replacement while following safety precautions.
New Holland L223 TIER 4 Skid Steer Loader Service Repair Manual [NDM474381 - ...fusekdmdmded
This service manual provides instructions for servicing engines and components for New Holland 200 Series Skid Steer Loaders and Compact Track Loaders including removing the engine by draining fluids, disconnecting electrical connections and hoses, removing covers and cooling components, and then removing mounting hardware and the engine hood. Specific models and replacement part numbers are listed. Safety warnings are provided throughout regarding personal safety and relieving pressure before disconnecting lines.
New Holland CX5090 Tier 3 Combine Harvester Service Repair Manual.pdffusekdmdmded
The document is a service manual that provides information on hydraulic, pneumatic, electrical, and electronic systems for CX5000 and CX6000 series equipment. It includes:
- Specifications and torque values for hydraulic fittings and connections.
- Details on the primary hydraulic system, including pump specifications and a hydraulic schematic diagram labeling key components.
- Images showing the location of hydraulic components such as the header quick-release coupler, lateral float cylinder, header lift cylinders, and straw elevator.
New Holland L225 TIER 4 Skid Steer Loader Service Repair Manual [NDM461085 - ...fusekdmdmded
This service manual provides instructions for servicing engines and components for New Holland 200 Series Skid Steer Loaders and Compact Track Loaders including removing the engine by draining fluids, disconnecting electrical connections and hoses, removing covers and cooling components, and then removing mounting hardware and the engine hood. Specific models and replacement part numbers are listed. Safety warnings are provided throughout regarding personal safety and relieving pressure before disconnecting lines.
New Holland W60C ZB Tier 4B (final) Compact Wheel Loader Service Repair Manua...fusekdmdmded
1. Disconnect wiring harnesses, condenser hoses (if equipped), and rear lights. Remove engine hood and grille.
2. Drain air conditioning system (if equipped) and disconnect fan connector. Remove condenser.
3. Put battery main switch in OFF position. Remove engine by disconnecting mounting bolts after preparing hydraulic system.
New Holland CX5090 Hillside Tier 4 Combine Harvester Service Repair Manual.pdffusekdmdmded
The document is a service manual that provides information on hydraulic, pneumatic, electrical, and electronic systems for CX5000 and CX6000 series equipment. It includes:
- Specifications and torque values for hydraulic fittings and connections.
- Details on the primary hydraulic system, including specifications for the main, steering, and lateral flotation pumps.
- Schematics and diagrams showing the layout of the hydraulic system and location of key components.
New Holland CX740 Combine Harvesters Service Repair Manual.pdffusekdmdmded
The document provides details on the primary hydraulic power system for New Holland CX combine harvesters. It includes a closed-center load sensing variable displacement pump that supplies oil to circuits for steering, header height control, straw elevator functions, lateral flotation control, reel adjustment, and unloading tube control. Key components are labeled in diagrams and their functions are described.
New Holland TC5070 Hillside Combine Harvesters Service Repair Manual 1.pdffusekdmdmded
The document provides service information for engines and various components of agricultural combines.
It includes sections on the engine, clutch, transmission, front and rear axle systems, brakes and controls, hydraulic systems, electrical systems, attachments and headers, product feeding, threshing, separation, residue handling, cleaning, and the cab.
Technical data, functional descriptions, diagnostic information, and service procedures are provided for mechanical, electrical and hydraulic components. Fault codes and troubleshooting information is also included for electrical systems.
New Holland CX760 Combine Harvesters Service Repair Manual.pdffusekdmdmded
The document provides details on the primary hydraulic power system for a New Holland combine. It includes a closed-center load sensing variable displacement pump that supplies oil to circuits for steering, header height control, straw elevator functions, lateral flotation control, reel adjustment, and unloading tube control. Key components described are the hydraulic pump, priority valve, filters, control valves, motors, cylinders, and accumulators that make up the high-pressure circuit.
New Holland CX5080 Tier 4 Combine Harvester Service Repair Manual.pdffusekdmdmded
The document is a service manual that provides information on hydraulic, pneumatic, electrical, and electronic systems for CX5000 and CX6000 series equipment. It includes:
- Specifications and torque values for hydraulic fittings and connections.
- Details on the primary hydraulic system, including specifications for the main, steering, and lateral flotation pumps.
- Schematics and diagrams showing the layout of the hydraulic system and location of key components.
New Holland CX820 Combine Harvesters Service Repair Manual.pdffusekdmdmded
The document provides details on the primary hydraulic power system for a New Holland combine. It includes a closed-center load sensing variable displacement pump that supplies oil to circuits for steering, header height control, straw elevator functions, lateral flotation control, reel adjustment, and unloading tube control. Key components described are the hydraulic pump, priority valve, filters, control valves, motors, cylinders, and accumulators that make up the high-pressure circuit.
New Holland TC5080 Hillside Combine Harvesters Service Repair Manual.pdffusekdmdmded
This service manual provides information on servicing TC5040, TC5050, TC5060, TC5070, TC5080, and TC5080 Hillside combines. The manual is divided into sections covering the combines' distribution systems, power train, travelling systems, body and structure, tool positioning, and crop processing systems. Each section contains technical data, functional descriptions, diagnostics, and service procedures for the machines' mechanical, electrical, hydraulic, and electronic components.
New Holland TC5070 Hillside Combine Harvesters Service Repair Manual.pdffusekdmdmded
The primary hydraulic power system for the combines includes multiple pumps that supply hydraulic fluid to various systems through a valve stack. The main components are the hydraulic pumps, oil tank, filters, valves, cylinders, and accumulators. Hydraulic flow is distributed to functions like the header, steering, and optional lateral flotation systems.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
6. INTRODUCTION
Basic instructions - Important notice regarding equipment servicing
W50C ZB NA --- WE
W60C ZB NA --- WE
W70C HS NA --- WE
W70C NA --- WE
W80C HS NA --- WE
W80C NA --- WE
All repair and maintenance work listed in this manual must be carried out only by qualified dealership personnel,
strictly complying with the instructions given, and using, whenever possible, the special tools.
Anyone who performs repair and maintenance operations without complying with the procedures provided herein
shall be responsible for any subsequent damages.
The manufacturer and all the organizations of its distribution chain, including - without limitation - national, regional, or
local dealers, reject any responsibility for damages caused by parts and/or components not approved by the manu-
facturer, including those used for the servicing or repair of the product manufactured or marketed by the manufacturer.
In any case, no warranty is given or attributed on the product manufactured or marketed by the manufacturer in case
of damages caused by parts and/or components not approved by the manufacturer.
The information in this manual is up-to-date at the date of the publication. It is the policy of the manufacturer for
continuous improvement. Some information could not be updated due to modifications of a technical or commercial
type, or changes to the laws and regulations of different countries.
In case of questions, refer to your NEW HOLLAND CONSTRUCTION Sales and Service Networks.
47829080B_EN_NA 05/05/2015
3
7. INTRODUCTION
Basic instructions - Shop and assembly
W50C ZB NA --- WE
W60C ZB NA --- WE
W70C HS NA --- WE
W70C NA --- WE
W80C HS NA --- WE
W80C NA --- WE
Shimming
For each adjustment operation, select adjusting shims and measure the adjusting shims individually using a microm-
eter, then add up the recorded values. Do not rely on measuring the entire shimming set, which may be incorrect, or
the rated value shown on each shim.
Rotating shaft seals
For correct rotating shaft seal installation, proceed as follows:
1. Before assembly, allow the seal to soak in the oil it will be sealing for at least thirty minutes.
2. Thoroughly clean the shaft and check that the working surface on the shaft is not damaged.
3. Position the sealing lip facing the fluid.
NOTE: With hydrodynamic lips, take into consideration the shaft rotation direction and position the grooves so that
they will move the fluid towards the inner side of the seal.
4. Coat the sealing lip with a thin layer of lubricant (use oil rather than grease). Fill the gap between the sealing lip
and the dust lip on double lip seals with grease.
5. Insert the seal in its seat and press down using a flat punch or seal installation tool. Do not tap the seal with a
hammer or mallet.
6. While you insert the seal, check that the seal is perpendicular to the seat. When the seal settles, make sure that
the seal makes contact with the thrust element, if required.
7. To prevent damage to the seal lip on the shaft, position a protective guard during installation operations.
O-ring seals
Lubricate the O-ring seals before you insert them in the seats. This will prevent the O-ring seals from overturning and
twisting, which would jeopardize sealing efficiency.
Sealing compounds
Apply a sealing compound on the mating surfaces when specified by the procedure. Before you apply the sealing
compound, prepare the surfaces as directed by the product container.
Spare parts
Only use CNH Original Parts or NEW HOLLAND CONSTRUCTION Original Parts.
Only genuine spare parts guarantee the same quality, duration, and safety as original parts, as they are the same
parts that are assembled during standard production. Only CNH Original Parts or NEW HOLLAND CONSTRUCTION
Original Parts can offer this guarantee.
When ordering spare parts, always provide the following information:
• Machine model (commercial name) and Product Identification Number (PIN)
• Part number of the ordered part, which can be found in the parts catalog
47829080B_EN_NA 05/05/2015
4
8. INTRODUCTION
Protecting the electronic and/or electrical systems during charging and welding
To avoid damage to the electronic and/or electrical systems, always observe the following practices:
1. Never make or break any of the charging circuit connections when the engine is running, including the battery
connections.
2. Never short any of the charging components to ground.
3. Always disconnect the ground cable from the battery before arc welding on the machine or on any machine
attachment.
• Position the welder ground clamp as close to the welding area as possible.
• If you weld in close proximity to a computer module, then you should remove the module from the machine.
• Never allow welding cables to lie on, near, or across any electrical wiring or electronic component while you
weld.
4. Always disconnect the negative cable from the battery when charging the battery in the machine with a battery
charger.
NOTICE: If you must weld on the unit, you must disconnect the battery ground cable from the machine battery.
The electronic monitoring system and charging system will be damaged if this is not done.
5. Remove the battery ground cable. Reconnect the cable when you complete welding.
Special tools
WARNING
Battery acid causes burns. Batteries contain sulfuric acid.
Avoid contact with skin, eyes or clothing. Antidote (external): Flush with water. Antidote (eyes): flush
with water for 15 minutes and seek medical attention immediately. Antidote (internal): Drink large
quantities of water or milk. Do not induce vomiting. Seek medical attention immediately.
Failure to comply could result in death or serious injury.
W0111A
The special tools that NEW HOLLAND CONSTRUCTION suggests and illustrate in this manual have been specifically
researched and designed for use with NEW HOLLAND CONSTRUCTION machines. The special tools are essential
for reliable repair operations. The special tools are accurately built and rigorously tested to offer efficient and long-
lasting operation.
By using these tools, repair personnel will benefit from:
• Operating in optimal technical conditions
• Obtaining the best results
• Saving time and effort
• Working in safe conditions
47829080B_EN_NA 05/05/2015
5
9. INTRODUCTION
Safety rules
W50C ZB NA --- WE
W60C ZB NA --- WE
W70C HS NA --- WE
W70C NA --- WE
W80C HS NA --- WE
W80C NA --- WE
Personal safety
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid possible death or injury.
Throughout this manual you will find the signal words DANGER, WARNING, and CAUTION followed by special in-
structions. These precautions are intended for the personal safety of you and those working with you.
Read and understand all the safety messages in this manual before you operate or service the machine.
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION, used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
FAILURE TO FOLLOW DANGER, WARNING, AND CAUTION MESSAGES COULD RESULT
IN DEATH OR SERIOUS INJURY.
Machine safety
NOTICE: Notice indicates a situation which, if not avoided, could result in machine or property damage.
Throughout this manual you will find the signal word Notice followed by special instructions to prevent machine or
property damage. The word Notice is used to address practices not related to personal safety.
Information
NOTE: Note indicates additional information which clarifies steps, procedures, or other information in this manual.
Throughout this manual you will find the word Note followed by additional information about a step, procedure, or
other information in the manual. The word Note is not intended to address personal safety or property damage.
47829080B_EN_NA 05/05/2015
6
10. INTRODUCTION
Product identification - Machine components
W50C ZB NA --- WE
W60C ZB NA --- WE
W70C HS NA --- WE
W70C NA --- WE
W80C HS NA --- WE
W80C NA --- WE
LEIL14CWL0054FB 1
1. Cab door and hand holds 5. Roll Over Protection Structure (ROPS) and Falling
Objects Protective Structure (FOPS) cab
2. Steps 6. Boom cylinder
3. Fuel tank access) 7. Loader lift arms
4. Engine hood 8. Cab air filter access
47829080B_EN_NA 05/05/2015
17
13. Engine - Engine and crankcase
Engine - Remove
W50C ZB NA --- WE
W60C ZB NA --- WE
W70C HS NA --- WE
W70C NA --- WE
W80C HS NA --- WE
W80C NA --- WE
NOTE: Emissions sensors mounted in the exhaust stream are sensitive to extreme vibrations. Use of tools that gen-
erate extreme vibrations, such as impact wrenches and hammers, will result in damage to emission sensors. Avoid
using these tools during any service procedure in close proximity of emission sensors. If the use of these tools cannot
be avoided, remove the sensors using extreme caution prior to performing any service procedure.
1. Park the machine on firm, level ground, lower the
bucket/attachment to the ground.
Drive the machine into such a position that the bores
of the holders are aligned one above the other. Then
secure with the pin (arrow). The pin is located inside
the support on the frame.
Stop the engine.
LEIL14CWL0005AB 1
2. Keep all non-authorized personnel clear of the ma-
chine. Turn the ignition switch key to the “ON” position.
3. Move the joystick slowly forward and backward and
from the right-hand to the left-hand approximately a
dozen times. Turn the ignition key to the OFF position.
Pump brakes approximately 30 times to bleed accumu-
lators. Bleed ride control accumulator (if equipped) with
bleed screw.
NOTE: before carrying out any service work on the hy-
draulic system, it is necessary to allow the system to cool:
the temperature should not be more than 40 °C (104.0 °F).
LEIL14CWL0003AB 2
4. Open the outer panel to access the battery main switch.
The battery main switch box is located on the right-hand
side of the machine, below the operator’s compart-
ment.
LEIL14CWL0015AB 3
47829080B_EN_NA 05/05/2015
10.1 [10.001] / 3
14. Engine - Engine and crankcase
5. Put the battery main switch (1) in the OFF position.
LEIL14CWL0017AA 4
6. Disconnect the wiring harness (X-228) and (X-229)
from the engine air filter.
Disconnect the wiring harness (X-106) from the air tem-
perature sensor.
LEIL14CWL0171AB 5
Versions with air conditioning
1. Drain the air conditioning system and disconnect the
fan electrical connector (1).
Tag and disconnect the condenser hoses (2) and (3).
LEIL14CWL0159A 6
2. Remove the two lower bolts (1) of the condenser
bracket (2).
LEIL14CWL0160AB 7
47829080B_EN_NA 05/05/2015
10.1 [10.001] / 4
15. Engine - Engine and crankcase
3. Remove the two upper bolts (1) of the condenser.
Remove the condenser (2).
LEIL14CWL0161AB 8
All versions
1. Secure the engine hood (1) with the nylon llifting strap.
LEIL14CWL0216AB 9
2. Have another person to balance the hood and remove
the hood hinge mounting bolts (arrows) from the ma-
chine structure.
Carefully raise and remove the engine hood (1) from
loader. Lower the engine hood onto suitable platform
and disconnect lifting equipment.
LEIL14CWL0162AB 10
3. Tag and disconnect the left rear light connector (1).
Repeat this operation for the right rear light connector.
LEIL14CWL0163AB 11
47829080B_EN_NA 05/05/2015
10.1 [10.001] / 5
16. Engine - Engine and crankcase
4. Tag and disconnect the water in fuel wiring harness
(X-105).
Tag and disconnect the backup alarm wiring harness
(X-064).
Tag and disconnect the filter pressure switch wiring har-
ness (X-227). Cut the ties cable (1).
LEIL14CWL0173AB 12
5. Remove the four mounting bolts (1) of the right grid (2).
Remove the right grid (2).
NOTE: repeat the same operation on the left side.
LEIL14CWL0217AB 13
6. Connect suitable lifting equipment to counterweight (re-
fer to Couterweight – Remove).
Remove the six bolts (arrows) of the counterweight and
remove it.
LEIL14CWL0164AB 14
7. Slowly extract the counterweight (1) from rear chassis.
Be sure all wire harness connections have been dis-
connected.
Remove the counterweight (1) from the machine.
Lower the counterweight onto suitable platform and dis-
connect the lifting equipment.
LEIL14CWL0218AB 15
47829080B_EN_NA 05/05/2015
10.1 [10.001] / 6
17. Engine - Engine and crankcase
8. Remove the cap from the hydraulic tank (2).
Insert, into the hole, the hose (1) connected to a suction
pump and suck the oil from the tank (2).
NOTE: use a suitable container for collection of coolant and
abide by all local environmental laws for proper handling
and disposal.
LEIL14CWL0219AB 16
9. Loosen the clamp (2) on the coolant hose (1) and dis-
connect it from the radiator.
NOTE: use a suitable container for collection of coolant and
abide by all local environmental laws for proper handling
and disposal.
10. Unscrew the fitting and disconnect the hydraulic oil
hose (3) from the radiator.
LEIL14CWL0232AB 17
11. Loosen the clamp (1) and disconnect the coolant hose
(2) from the radiator.
Unscrew the fitting and disconnect the hydraulic oil
hose (3) from the radiator.
LEIL14CWL0233AB 18
12. Remove the screws (1) securing the clamps of the
hydraulic oil hose (2).
LEIL14CWL0234AB 19
47829080B_EN_NA 05/05/2015
10.1 [10.001] / 7
18. Engine - Engine and crankcase
13. Remove the four screws (1) to remove the fan guard
(2).
LEIL14CWL0469AB 20
14. Loosen the nut (3) to unscrew the fan (4).
The nut (3) is left-handed: turn the nut (3) clockwise
in respect to the engine to loosen the nut (3).
LEIL14CWL0456AB 21
15. Lean the fan (4) against the radiator group (5).
LEIL14CWL0457AB 22
16. Remove the screw (1) and disconnect the earth strap
(2) from the engine.
LEIL14CWL0170AB 23
47829080B_EN_NA 05/05/2015
10.1 [10.001] / 8
19. Engine - Engine and crankcase
17. Loosen the clamp (1) and disconnect the oil steam
recovery hose (2).
LEIL14CWL0220AB 24
18. Loosen the clamp (1) and disconnect the air inlet hose
(4).
Remove the screws (2) from the bracket (3).
LEIL14CWL0221AB 25
19. Remove the screw (2) to release the air inlet hose (3)
from the clamp (1).
LEIL14CWL0222AB 26
20. Remove the screw (2) of the half guideway (3) for
positioning fuel hoses (1).
LEIL14CWL0223AB 27
47829080B_EN_NA 05/05/2015
10.1 [10.001] / 9
20. Engine - Engine and crankcase
21. Remove the screws (1) of the air filter bracket (2).
Remove the air filter assembly (3) with the air inlet
hose, the oil vapor recovery pipe and bracket with
O-ring.
LEIL14CWL0224AB 28
22. Disconnect the wiring harness (X-109) from the inter-
mediate connector signal.
Disconnect the wiring harness (X-110) from the inter-
mediate connector injector.
Disconnect the A/C clutch wiring harness (X-226)
(only air conditioning versions).
Remove the clamp (1) and cut the ties cable (2).
LEIL14CWL0172A 29
23. Behind the starter motor (1), remove the screw (3)
and disconnect the ground wiring harness (X-232),
(X-233) and (X-234).
Remove the ties cable (2).
LEIL14CWL0174AB 30
47829080B_EN_NA 05/05/2015
10.1 [10.001] / 10
21. Engine - Engine and crankcase
24. Fan condenser connector (X-056) has already been
disconnected when removing the condenser (only air
conditioning versions).
Disconnect reverse solenoid wiring harness (X-086).
Disconnect the forward solenoid wiring harness
(X-087).
Disconnect the exhaust gas temperature sensor
wiring harness (X-107) and (X-108).
Remove the ties cable (1).
LEIL14CWL0175BB 31
25. Remove the screws (1) securing the exhaust stack (2).
NOTE: the exhaust stack (2) must be removed after the
detachment of the PM-Cat system.
LEIL14CWL0225AB 32
26. Loosen the clamp (1) and disconnect the compensa-
tion hose (2) from the PM-Cat system (3).
LEIL14CWL0226AB 33
47829080B_EN_NA 05/05/2015
10.1 [10.001] / 11
22. Engine - Engine and crankcase
27. Remove the four screws (arrows) securing PM-Cat
system (1) of the frame.
Remove the PM-Cat system (1) from the machine.
Extract, from the bottom, the exhaust stack.
LEIL14CWL0227AB 34
28. Disconnect the lambda probe connector (2).
Loosen the clamp (1) and remove the compensation
hose (3) from the turbocharger (4).
LEIL14CWL0228AB 35
29. Acting from under the machine:
• turn off the tap (1);
• loosen the clamp (2) and disconnect the cab heat-
ing hose;
• open the tap (1) to drain the coolant from the engine
block.
NOTE: use a suitable container for collection of coolant and
abide by all local environmental laws for proper handling
and disposal.
LEIL14CWL0229AB 36
30. From the right side of the machine, loosen the clamp
(1) and disconnect the hose cab heating (2).
LEIL14CWL0230AB 37
47829080B_EN_NA 05/05/2015
10.1 [10.001] / 12
23. Engine - Engine and crankcase
31. Remove the screw (1) of the half guideway for posi-
tioning reverse hose (2) and forward hose (3).
LEIL14CWL0231AB 38
32. Tag and disconnect starter motor (Terminal 50) wiring
harness (X-061).
Tag and disconnect starter motor wiring harness
(X-062) and (X-063).
Tag and disconnect alternator battery cable (X-040).
Tag and disconnect alternator (D+) wiring harness
(X-041).
Unscrew the bolt (1) and remove the clamp (2).
Remove eventually clamps and cut the ties cable not
indicated.
LEIL14CWL0176BB 39
33. Disconnect the fuel line hose (1) from the fuel pre-filter
and fuel hose (2).
LEIL14CWL0177AB 40
47829080B_EN_NA 05/05/2015
10.1 [10.001] / 13
24. Engine - Engine and crankcase
34. Unscrew the hydraulic fitting (1), (2) and (3) and dis-
connect the hoses from the gear pump.
Unscrew the hydraulic fitting (5) and (6) and discon-
nect the hoses from the hydrostatic pump.
Remove the four screws and disconnect the pipe (4)
from the hydrostatic pump.
Unscrew the hydraulic fitting (7) and disconnect the
pipe from the hydrostatic pump.
LEIL14CWL0178AB 41
35. Unscrew the hydraulic fitting (1) and disconnect the
hose from the hydrostatic pump.
Unscrew the hydraulic fitting (2) and disconnect the
pipe from the hydrostatic pump.
Remove the four screws and disconnect the pipe (4)
from the hydrostatic pump.
Remove the four screws and disconnect the pipe (3)
from the gear pump.
LEIL14CWL0179AB 42
36. For the models equipped with auxiliary pump (1), un-
screw the hydraulic fitting (2) and disconnect the hose
from the auxiliary pump.
LEIL14CWL0180AB 43
37. Connect suitable lifting equipment to engine lifting
brackets (arrows). Take up all slack in lifting equip-
ment.
LEIL14CWL0236AB 44
47829080B_EN_NA 05/05/2015
10.1 [10.001] / 14
25. Engine - Engine and crankcase
38. Remove the engine silent block (arrows) unscrewing
the nuts from the lower part of the engine.
Slowly raise engine from rear chassis. Be sure all wire
harness connections and hoses have been discon-
nected and are clear of the engine. Remove engine
from machine.
LEIL14CWL0235AB 45
47829080B_EN_NA 05/05/2015
10.1 [10.001] / 15
26. Engine - Engine and crankcase
Engine - Install
W50C ZB NA --- WE
W60C ZB NA --- WE
W70C HS NA --- WE
W70C NA --- WE
W80C HS NA --- WE
W80C NA --- WE
WARNING
Hot liquid under pressure!
Never remove the filler cap or the recovery tank cap while the engine is running or the coolant is hot.
Let the system cool. Turn the filler cap to the first notch and allow any pressure to escape, and then
remove the filler cap. Loosen the recovery tank cap slowly to allow any pressure to escape.
Failure to comply could result in death or serious injury.
W0296A
NOTE: Emission sensors mounted in the exhaust stream are sensitive to extreme vibrations. Use of tools that gen-
erate extreme vibrations, such as impact wrenches and hammers, will result in damage to emission sensors. Avoid
using these tools during any service procedure in close proximity of emission sensors. If the use of these tools cannot
be avoided, remove the sensors using extreme prior to performing any service procedure.
1. Inspect the engine mounts. If the engine rubber isola-
tors require replacement, remove and discard the iso-
lators (1) and (2). Install new rubber isolator (2), then
rubber isolator (1).
Make sure that the tightening torque of the fixing screws
of the brackets to the engine is 118 - 133 N·m (87 - 98 lb
ft).
LEIL14CWL0393AB 1
2. Attach suitable lifting device to the engine and slowly
move it into position over the rear chassis. Be sure all
harness connections and hoses are out of the way or
positioned correctly for reconnecting, before lowering
engine.
Install the silent blocks (arrows) on the engine.
LEIL14CWL0235AB 2
47829080B_EN_NA 05/05/2015
10.1 [10.001] / 16
27. Engine - Engine and crankcase
3. Tighten the mounting bolts of the engine to a torque of
244 - 298 N·m (180 - 220 lb ft).
LEIL14CWL0394AB 3
4. Disconnect lifting equipment from the engine lifting
brackets.
LEIL14CWL0236AB 4
5. For the models equipped with auxiliary pump (1),
connect the hydraulic hose to the auxiliary pump and
tighten the fitting (2).
LEIL14CWL0180AB 5
6. Connect the hydraulic pipe (3) to the gear pump and
tighten the four screws on the half-shells.
Connect the hydraulic pipe (4) to the hydrostatic pump
and tighten the four screws on the half-shells.
Connect the hydraulic hoses to the hydrostatic pump
and tighten the fittings (1) and (2).
LEIL14CWL0179AB 6
47829080B_EN_NA 05/05/2015
10.1 [10.001] / 17
28. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
29. Engine - Engine and crankcase
7. Connect the hydraulic hoses to the gear pump and
tighten the fittings (1), (2) and (3).
Connect the hydraulic hoses to the hydrostatic pump
and tighten the fittings (5) and (6).
Connect the hydraulic pipe (4) to the hydrostatic pump
and tighten the four screws of the half-shells.
Connect the hydraulic pipe to the hydrostatic pump and
tighten the fitting (7).
LEIL14CWL0178AB 7
8. Connect the fuel line hose (1) to the fuel pre-filter and
fuel hose (2).
LEIL14CWL0177AB 8
9. Connect starter motor (Terminal 50) wiring harness
(X-061).
Connect starter motor wiring harness (X-062) and
(X-063).
Connect alternator battery cable (X-040).
Connect alternator (D+) wiring harness (X-041).
Install the clamp (2) and secure it with the bolt (1).
LEIL14CWL0176BB 9
47829080B_EN_NA 05/05/2015
10.1 [10.001] / 18
30. Engine - Engine and crankcase
10. Remove the screw (1) of the half guideway for posi-
tioning reverse hose (2) and forward hose (3).
Position the half guideway on the reverse hose (2) and
forward hose (3).
Tighten the screw (1) for blocking the hoses in cor-
rectly position.
LEIL14CWL0231AB 10
11. From the right side of the machine, connect the hose
cab heating (2) to the engine and secure the clamp
(1).
LEIL14CWL0230AB 11
12. Acting from under the machine:
• connect the cab heating hose and secure the clamp
(2);
• open the tap (1).
LEIL14CWL0229AB 12
13. Install the compensation hose (3) on the turbocharger
(4).
Tighten the collar (1).
Connect the lambda probe connector (2).
LEIL14CWL0228AB 13
47829080B_EN_NA 05/05/2015
10.1 [10.001] / 19
31. Engine - Engine and crankcase
14. Insert, from the bottom, the exhaust stack.
Install the PM-Cat system (1) on the machine. Tighten
the four screws (arrows) to secure the PM-Cat system
(1) to the frame.
NOTE: the exhaust stack must be positioned before the
installation of the PM-Cat system.
LEIL14CWL0227AB 14
15. Connect the compensation hose (2) to the PM-Cat
system (3).
Tighten the collar (1).
LEIL14CWL0226AB 15
16. Install the exhaust stack (2) on the PM-Cat system and
tighten the screws (1).
LEIL14CWL0225AB 16
47829080B_EN_NA 05/05/2015
10.1 [10.001] / 20
32. Engine - Engine and crankcase
17. Connect the exhaust gas temperature sensor wiring
harness (X-107) and (X-108).
Connect the forward solenoid wiring harness (X-087).
Connect reverse solenoid wiring harness (X-086).
Secure the wiring harness with the ties cable (1).
LEIL14CWL0175BB 17
Only air conditioning version
1. Fan condenser connector (X-056) must be connected
when installing the condenser.
2. Behind the starter motor (1), connect the ground wiring
harness (X-232), (X-233) and (X-234) and tighten the
screw (3).
Secure the ground wiring harness with the ties cable
(2).
LEIL14CWL0174AB 18
47829080B_EN_NA 05/05/2015
10.1 [10.001] / 21
33. Engine - Engine and crankcase
3. Connect the wiring harness (X-109) to the intermediate
connector signal.
Connect the wiring harness (X-110) to the intermediate
connector injector.
4. Connect the A/C clutch wiring harness (X-226)
Secure the wiring harness with the clamp (1) and the
ties cable (2).
LEIL14CWL0172A 19
5. Install on the engine the air filter assembly (3) with the
air inlet hose, the oil vapor recovery pipe and bracket
with O-ring.
Tighten the screws (1) of the air filter bracket (2).
LEIL14CWL0224AB 20
6. Install the half guideway (3) for positioning fuel hoses
(1).
Tighten the screw (2).
NOTICE: the nut (3) is left-handed: turn the nut (3) coun-
terclockwise in respect to the engine to tighten the nut (3).
7. Install the fan (4) and tighten the nut (3).
LEIL14CWL0223AB 21
8. Install the new O-ring on the bracket (3).
Connect the air inlet hose (4) and secure the clamp (1).
Install the bracket (3) on the engine and tighten the
screws (2).
LEIL14CWL0221AB 22
47829080B_EN_NA 05/05/2015
10.1 [10.001] / 22
34. Engine - Engine and crankcase
9. Connect the oil steam recovery hose (2) and secure the
clamp (1).
LEIL14CWL0220AB 23
10. Install the clamp (1) to secure the air inlet hose (3) and
tighten the screw (2).
LEIL14CWL0222AB 24
11. Connect the earth strap (2) to the engine and tighten
the screw (1).
LEIL14CWL0170AB 25
12. Install the fan guard (2) and tighten the four screws
(1).
LEIL14CWL0469AB 26
47829080B_EN_NA 05/05/2015
10.1 [10.001] / 23
35. Engine - Engine and crankcase
13. Connect the hydraulic oil hose (3) to the radiator upper
side and tighten the fitting.
Connect the coolant hose (2) to the radiator and se-
cure the clamp (1).
LEIL14CWL0233AB 27
14. Connect the hydraulic oil hose (3) to the radiator under
side and tighten the fitting.
Connect the coolant hose (1) to the radiator and se-
cure the clamp (2) .
LEIL14CWL0232AB 28
15. Secure the hydraulic oil hoses (2) with the clamps and
tighten the screws (1).
LEIL14CWL0234AB 29
16. Connect suitable lifting equipment to counterweight.
Slowly install the counterweight (1) on the rear the
machine.
LEIL14CWL0218AB 30
47829080B_EN_NA 05/05/2015
10.1 [10.001] / 24