This document is a service manual for a wheel loader that provides specifications and repair instructions. It contains sections on the engine, transmission, drivetrain, brakes, hydraulics, frames, steering, wheels, cab controls, electrical systems, attachments, and other components. Tables provide torque specifications for fasteners in decimal, metric, and hydraulic fitting sections.
New Holland W270C Tier 4 Wheel Loader Service Repair Manual.pdfdongjieping19
This document is a service manual for a wheel loader that provides specifications and repair instructions for the engine, transmission, drivetrain, brakes, hydraulics, frames, steering, wheels, climate control, electrical systems, boom, bucket, cab, and decals. It includes sections on the engine, transmission, four-wheel drive system, front and rear axles, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, booms/dippers/buckets, cab/bodywork/decals. Torque specifications are provided for various hardware.
New Holland W300C Tier 4 Wheel Loader Service Repair Manual.pdfdongjieping19
This document is a service manual for a wheel loader that provides specifications and repair instructions for the engine, transmission, drivetrain, brakes, hydraulics, frames, steering, wheels, climate control, electrical systems, booms, buckets, cab, and decals. It includes sections on the engine, transmission, four-wheel drive system, front and rear axles, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, booms, dippers, buckets, platform, cab, and decals. Torque specifications are provided for hardware.
New Holland W300C Tier 4 Wheel Loader Service Repair Manual.pdfqiaodao08
This document is a service manual for a wheel loader that provides specifications and repair instructions for the engine, transmission, drivetrain, brakes, hydraulics, frames, steering, wheels, climate control, electrical systems, boom, bucket, cab, and decals. It includes sections on the engine, transmission, four-wheel drive system, front and rear axles, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, booms/dippers/buckets, cab/bodywork/decals. Torque specifications are provided for various hardware.
New Holland W270C Tier 4 Wheel Loader Service Repair Manual.pdfqiaodao08
This document is a service manual for a wheel loader that provides specifications and repair instructions. It contains sections on the engine, transmission, four-wheel drive system, front and rear axles, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, booms, dippers, buckets, platform, cab, bodywork, and decals. The introduction includes international symbols, conversion factors, and information on torque specifications for decimal hardware.
New Holland W270C Tier 4 Wheel Loader Service Repair Manual.pdfyan697621572739
This document is a service manual for a wheel loader that provides specifications and repair instructions for the engine, transmission, drivetrain, brakes, hydraulics, frames, steering, wheels, climate control, electrical systems, boom, bucket, cab, and decals. It includes torque specifications for hardware and fittings. The manual contains over 55 sections covering all major vehicle systems.
New Holland W300C Tier 4 Wheel Loader Service Repair Manual.pdfyan697621572739
This document is a service manual for a wheel loader that provides specifications and repair instructions. It contains sections on the engine, transmission, four-wheel drive system, front and rear axles, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, booms, dippers, buckets, platform, cab, bodywork, and decals. The introduction includes international symbols, conversion factors, and information on torque specifications for decimal hardware.
Case 1021 f tier 4 wheel loader service repair manualfjskkksmemm
This document is a service manual that provides maintenance and repair information for engines, transmissions, axles, brakes, hydraulics, electrical systems, and other components of construction equipment models 1021F and 1121F. The manual includes specifications, diagrams, removal and installation procedures, and torque values for fasteners throughout the machines. Sections cover the engine, transmission, drivetrain, front and rear axles, brakes, hydraulics, steering, wheels, cab climate control, and electrical systems.
Case 1121 f tier 4 wheel loader service repair manualfjsekksmemm
This document is a service manual that provides maintenance and repair information for engines, transmissions, axles, brakes, hydraulics, electrical systems, and other components of construction equipment models 1021F and 1121F. The manual includes specifications, diagrams, removal and installation instructions, and torque values for fasteners throughout the machines. Sections cover the engine, transmission, drivetrain, front and rear axles, brakes, hydraulics, steering, wheels, cab climate control, and electrical systems.
New Holland W270C Tier 4 Wheel Loader Service Repair Manual.pdfdongjieping19
This document is a service manual for a wheel loader that provides specifications and repair instructions for the engine, transmission, drivetrain, brakes, hydraulics, frames, steering, wheels, climate control, electrical systems, boom, bucket, cab, and decals. It includes sections on the engine, transmission, four-wheel drive system, front and rear axles, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, booms/dippers/buckets, cab/bodywork/decals. Torque specifications are provided for various hardware.
New Holland W300C Tier 4 Wheel Loader Service Repair Manual.pdfdongjieping19
This document is a service manual for a wheel loader that provides specifications and repair instructions for the engine, transmission, drivetrain, brakes, hydraulics, frames, steering, wheels, climate control, electrical systems, booms, buckets, cab, and decals. It includes sections on the engine, transmission, four-wheel drive system, front and rear axles, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, booms, dippers, buckets, platform, cab, and decals. Torque specifications are provided for hardware.
New Holland W300C Tier 4 Wheel Loader Service Repair Manual.pdfqiaodao08
This document is a service manual for a wheel loader that provides specifications and repair instructions for the engine, transmission, drivetrain, brakes, hydraulics, frames, steering, wheels, climate control, electrical systems, boom, bucket, cab, and decals. It includes sections on the engine, transmission, four-wheel drive system, front and rear axles, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, booms/dippers/buckets, cab/bodywork/decals. Torque specifications are provided for various hardware.
New Holland W270C Tier 4 Wheel Loader Service Repair Manual.pdfqiaodao08
This document is a service manual for a wheel loader that provides specifications and repair instructions. It contains sections on the engine, transmission, four-wheel drive system, front and rear axles, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, booms, dippers, buckets, platform, cab, bodywork, and decals. The introduction includes international symbols, conversion factors, and information on torque specifications for decimal hardware.
New Holland W270C Tier 4 Wheel Loader Service Repair Manual.pdfyan697621572739
This document is a service manual for a wheel loader that provides specifications and repair instructions for the engine, transmission, drivetrain, brakes, hydraulics, frames, steering, wheels, climate control, electrical systems, boom, bucket, cab, and decals. It includes torque specifications for hardware and fittings. The manual contains over 55 sections covering all major vehicle systems.
New Holland W300C Tier 4 Wheel Loader Service Repair Manual.pdfyan697621572739
This document is a service manual for a wheel loader that provides specifications and repair instructions. It contains sections on the engine, transmission, four-wheel drive system, front and rear axles, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, booms, dippers, buckets, platform, cab, bodywork, and decals. The introduction includes international symbols, conversion factors, and information on torque specifications for decimal hardware.
Case 1021 f tier 4 wheel loader service repair manualfjskkksmemm
This document is a service manual that provides maintenance and repair information for engines, transmissions, axles, brakes, hydraulics, electrical systems, and other components of construction equipment models 1021F and 1121F. The manual includes specifications, diagrams, removal and installation procedures, and torque values for fasteners throughout the machines. Sections cover the engine, transmission, drivetrain, front and rear axles, brakes, hydraulics, steering, wheels, cab climate control, and electrical systems.
Case 1121 f tier 4 wheel loader service repair manualfjsekksmemm
This document is a service manual that provides maintenance and repair information for engines, transmissions, axles, brakes, hydraulics, electrical systems, and other components of construction equipment models 1021F and 1121F. The manual includes specifications, diagrams, removal and installation instructions, and torque values for fasteners throughout the machines. Sections cover the engine, transmission, drivetrain, front and rear axles, brakes, hydraulics, steering, wheels, cab climate control, and electrical systems.
Case 1021 f tier 4 wheel loader service repair manualuudjjkkskmme
This document is a service manual that contains contents, introduction, and torque specifications for various components of an engine, transmission, drivetrain, axles, brakes, hydraulics, steering, wheels, cab climate control, and electrical systems. The document provides over 50 section references to the manual and lists torque values for fasteners and components throughout the vehicle systems.
Case 1021 f tier 4 wheel loader service repair manualfujsjfjksekem
This document is a service manual that contains contents, introduction, and torque specifications for various components of an engine, transmission, drivetrain, axles, brakes, hydraulics, steering, wheels, cab climate control, and electrical systems. The document provides over 50 section references to the manual and lists torque values for fasteners and components throughout the vehicle systems.
Case 1121 f tier 4 wheel loader service repair manualfujsjefjkskefksem
This document is a service manual that contains contents, introduction, and torque specifications for various components of an engine, transmission, drivetrain, axles, brakes, hydraulics, steering, wheels, cab climate control, and electrical systems. The document provides over 50 section references to more detailed information about each system, and includes over 30 torque specifications for fasteners and components throughout the machine.
Case 1021 f tier 4 wheel loader service repair manualfujsjefkskekem
This document is a service manual that provides information for servicing various components of a construction machine, including the engine, transmission, axles, brakes, hydraulics, steering, wheels, cab climate control, and electrical systems. It includes removal and installation procedures, specifications, component locations, and torque values. Sections cover topics such as the engine and crankcase, air cleaners and lines, fuel injection system, lubrication system, and more.
Case 1021 f tier 4 wheel loader service repair manualfujsjefkskekmem
This document is a service manual that provides information for servicing various components of a construction machine, including the engine, transmission, axles, brakes, hydraulics, steering, wheels, cab climate control, and electrical systems. It includes removal and installation procedures, specifications, component locations, and torque values. Sections cover topics such as the engine and crankcase, air cleaners and lines, fuel injection system, lubrication system, and more.
Case 1121 f tier 4 wheel loader service repair manualudfjjjdkksmmd
This document is a service manual that contains contents, introduction, and torque specifications for various components of an engine, transmission, drivetrain, axles, brakes, hydraulics, steering, wheels, cab climate control, and electrical systems. The document provides over 50 section references to more detailed information about each system, and includes over 30 torque specifications for fasteners and components throughout the machine.
New Holland E85CMSR Midi Excavator Service Repair Manual.pdfzpdj618286
This document is a service manual for an E85CMSR Midi Excavator. It contains information on engine systems, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, dozer blades, and other components. The manual provides specifications, diagrams, maintenance and repair instructions to aid service technicians in working on and troubleshooting issues with the excavator. Safety precautions are outlined and each section includes references to related components.
New Holland E85CMSR Midi Excavator Service Repair Manual.pdffujsekdkddm3e
This document is a service manual for an E85CMSR Midi Excavator. It contains information on engine systems, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, dozer blades, and other components. The manual provides specifications, diagrams, maintenance and repair instructions to aid service technicians in working on and troubleshooting issues with the excavator. Safety precautions are outlined and each section includes an index of subsections covering specific components and systems.
New Holland E85CMSR Midi Excavator Service Repair Manual.pdfufjjskekdkdmdm3e
This document is a service manual for an E85CMSR Midi Excavator. It contains information on engine systems, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, dozer blades, and safety precautions. The manual provides specifications, component locations, maintenance procedures, and troubleshooting help for mechanics servicing this equipment. It aims to ensure the safe and proper repair of the excavator.
New Holland T5.115 Electro Command Tractor Service Repair Manual.pdff8seujdjkddm
1. Refit belts on alternator and compressor. Reposition compressor and belt.
2. Apply sealing compound and reconnect engine to gearbox. Secure with bolts.
3. Reconnect wiring harnesses, sensors, pipes, filters and other components.
4. Refit starter motor, battery cables and guards. Reconnect hydraulic and cooling lines.
5. Reinstall air cleaner, exhaust, brackets and other ancillary components. Apply torque settings.
New Holland T5.115 Tractor Service Repair Manual.pdff8seujdjkddm
This service manual section provides specifications for the engines used in CNH T5.95, T5.105, and T5.115 tractors, including details about the number of cylinders, displacement, power output, cooling system, lubrication system, and other key engine components. The engines are 4-cylinder, turbocharged diesel engines with direct fuel injection that produce between 99 and 114 horsepower.
New Holland T5.95 Tractor Service Repair Manual.pdff8seujdjkddm
This service manual section provides specifications for the engines used in CNH T5.95, T5.105, and T5.115 tractors, including details about the number of cylinders, displacement, power output, cooling system, lubrication system, and other key engine components. It offers technical information on the F5DFL413C*A003, F5DFL413B*A006, and F5DFL413B*A002 engines across various operating parameters.
New Holland T5.105 Tractor Service Repair Manual.pdff8seujdjkddm
This service manual section provides specifications for the engines used in CNH T5.95, T5.105, and T5.115 tractors, including details about the number of cylinders, displacement, power output, cooling system, lubrication system, and other key engine components. It offers technical information on the F5DFL413C*A003, F5DFL413B*A006, and F5DFL413B*A002 engines across various operating parameters.
New Holland T5.105 Electro Command Tractor Service Repair Manual.pdff8seujdjkddm
1. Refit belts on alternator and compressor pulley and adjust tension.
2. Reposition compressor and belt, ensuring belt is seated in all pulleys.
3. Apply sealing compound and reconnect engine to gearbox.
4. Reconnect all wiring harnesses, hoses, lines, and sensors to the engine.
5. Refit components like the starter motor, battery, filters, and brackets.
6. Check all fasteners and fluid levels after installation is complete.
New Holland T5.95 Electro Command Tractor Service Repair Manual.pdff8seujdjkddm
1. Refit belts on alternator and compressor pulley and adjust tension.
2. Reposition compressor and belt, ensuring belt is seated in all pulleys.
3. Apply sealing compound and install engine/front axle assembly to gearbox, turning crankshaft for alignment.
4. Reconnect all wiring harnesses, hoses, lines, and sensors to the engine and surrounding components.
New Holland LW110B Wheel Loader Service Repair Manual.pdff8seujdjkddm
This document provides instructions for removing and installing an engine and radiator on a New Holland Construction LW 110.B wheel loader. The 3-step process includes: 1) preparing the machine by lowering attachments, releasing pressures, and disconnecting batteries; 2) attaching lifting devices to the engine compartment and removing panels; and 3) removing engine and radiator components and installing the new engine.
New Holland W300C Wheel Loader Service Repair Manual.pdff8seujdjkddm
This document is a service manual for CNH Italia S.p.A. wheel loaders models W270C and W300C. It contains instructions and specifications for servicing and repairing components of the wheel loaders. The manual is divided into tabs covering general information, engines, fuel system, electrical systems, steering, powertrain, brakes, hydraulics, and mounted equipment. The document provided is the table of contents, which lists each section number and title. It does not contain any repair or service instructions.
New Holland W230C Tier 4 Wheel Loader Service Repair Manual.pdff8seujdjkddm
This document provides instructions for removing the engine from a wheel loader. It involves marking components for reinstallation, draining fluids like coolant and oil, disconnecting batteries, and using lifting straps to remove the engine. Removal requires proper safety procedures and draining of hydraulic pressure before disconnecting hoses and electrical connections.
New Holland W270C Wheel Loader Service Repair Manual.pdff8seujdjkddm
This document is a service manual for CNH Italia S.p.A. wheel loaders models W270C and W300C. It contains instructions and specifications for servicing and repairing components of the wheel loaders. The manual is divided into tabs covering general information, engines, fuel system, electrical systems, steering, powertrain, brakes, hydraulics, and mounted equipment. The document provides an index of sections for each component system and instructions for tasks like removing and installing engines, radiators, transmissions, hydraulic pumps and more. Safety practices and torque specifications are also included.
New Holland W270C Tier 4 Wheel Loader Service Repair Manual.pdff8seujdjkddm
This document is a service manual for a wheel loader that provides specifications and repair instructions. It contains sections on the engine, transmission, drivetrain, brakes, hydraulics, frames, steering, wheels, cab controls, electrical systems, attachments, and bodywork. The introduction provides conversion tables between metric and imperial units as well as torque specifications for fasteners.
New Holland W190C Tier 4A (interim) Wheel Loader Service Repair Manual.pdff8seujdjkddm
This service manual provides specifications and repair information for Tier 4A interim wheel loaders. It covers the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, front loader, bucket, cab, and decals. The manual includes an introduction on safety rules and product identification.
New Holland W190C Tier 4 Wheel Loader Service Repair Manual.pdff8seujdjkddm
- Drain engine oil and coolant from the machine. Disconnect batteries.
- Remove hood by disconnecting wiring harness, removing hinge bolts, and lifting with nylon strap through exhaust stack.
- Disconnect engine wiring harness, air intake hoses, exhaust pipes, and drive belt. Remove cooler hoses and air conditioning connections if equipped.
- The engine can now be lifted out after these removal steps are completed.
More Related Content
Similar to New Holland W300C Tier 4 Wheel Loader Service Repair Manual.pdf
Case 1021 f tier 4 wheel loader service repair manualuudjjkkskmme
This document is a service manual that contains contents, introduction, and torque specifications for various components of an engine, transmission, drivetrain, axles, brakes, hydraulics, steering, wheels, cab climate control, and electrical systems. The document provides over 50 section references to the manual and lists torque values for fasteners and components throughout the vehicle systems.
Case 1021 f tier 4 wheel loader service repair manualfujsjfjksekem
This document is a service manual that contains contents, introduction, and torque specifications for various components of an engine, transmission, drivetrain, axles, brakes, hydraulics, steering, wheels, cab climate control, and electrical systems. The document provides over 50 section references to the manual and lists torque values for fasteners and components throughout the vehicle systems.
Case 1121 f tier 4 wheel loader service repair manualfujsjefjkskefksem
This document is a service manual that contains contents, introduction, and torque specifications for various components of an engine, transmission, drivetrain, axles, brakes, hydraulics, steering, wheels, cab climate control, and electrical systems. The document provides over 50 section references to more detailed information about each system, and includes over 30 torque specifications for fasteners and components throughout the machine.
Case 1021 f tier 4 wheel loader service repair manualfujsjefkskekem
This document is a service manual that provides information for servicing various components of a construction machine, including the engine, transmission, axles, brakes, hydraulics, steering, wheels, cab climate control, and electrical systems. It includes removal and installation procedures, specifications, component locations, and torque values. Sections cover topics such as the engine and crankcase, air cleaners and lines, fuel injection system, lubrication system, and more.
Case 1021 f tier 4 wheel loader service repair manualfujsjefkskekmem
This document is a service manual that provides information for servicing various components of a construction machine, including the engine, transmission, axles, brakes, hydraulics, steering, wheels, cab climate control, and electrical systems. It includes removal and installation procedures, specifications, component locations, and torque values. Sections cover topics such as the engine and crankcase, air cleaners and lines, fuel injection system, lubrication system, and more.
Case 1121 f tier 4 wheel loader service repair manualudfjjjdkksmmd
This document is a service manual that contains contents, introduction, and torque specifications for various components of an engine, transmission, drivetrain, axles, brakes, hydraulics, steering, wheels, cab climate control, and electrical systems. The document provides over 50 section references to more detailed information about each system, and includes over 30 torque specifications for fasteners and components throughout the machine.
New Holland E85CMSR Midi Excavator Service Repair Manual.pdfzpdj618286
This document is a service manual for an E85CMSR Midi Excavator. It contains information on engine systems, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, dozer blades, and other components. The manual provides specifications, diagrams, maintenance and repair instructions to aid service technicians in working on and troubleshooting issues with the excavator. Safety precautions are outlined and each section includes references to related components.
New Holland E85CMSR Midi Excavator Service Repair Manual.pdffujsekdkddm3e
This document is a service manual for an E85CMSR Midi Excavator. It contains information on engine systems, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, dozer blades, and other components. The manual provides specifications, diagrams, maintenance and repair instructions to aid service technicians in working on and troubleshooting issues with the excavator. Safety precautions are outlined and each section includes an index of subsections covering specific components and systems.
New Holland E85CMSR Midi Excavator Service Repair Manual.pdfufjjskekdkdmdm3e
This document is a service manual for an E85CMSR Midi Excavator. It contains information on engine systems, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, dozer blades, and safety precautions. The manual provides specifications, component locations, maintenance procedures, and troubleshooting help for mechanics servicing this equipment. It aims to ensure the safe and proper repair of the excavator.
Similar to New Holland W300C Tier 4 Wheel Loader Service Repair Manual.pdf (9)
New Holland T5.115 Electro Command Tractor Service Repair Manual.pdff8seujdjkddm
1. Refit belts on alternator and compressor. Reposition compressor and belt.
2. Apply sealing compound and reconnect engine to gearbox. Secure with bolts.
3. Reconnect wiring harnesses, sensors, pipes, filters and other components.
4. Refit starter motor, battery cables and guards. Reconnect hydraulic and cooling lines.
5. Reinstall air cleaner, exhaust, brackets and other ancillary components. Apply torque settings.
New Holland T5.115 Tractor Service Repair Manual.pdff8seujdjkddm
This service manual section provides specifications for the engines used in CNH T5.95, T5.105, and T5.115 tractors, including details about the number of cylinders, displacement, power output, cooling system, lubrication system, and other key engine components. The engines are 4-cylinder, turbocharged diesel engines with direct fuel injection that produce between 99 and 114 horsepower.
New Holland T5.95 Tractor Service Repair Manual.pdff8seujdjkddm
This service manual section provides specifications for the engines used in CNH T5.95, T5.105, and T5.115 tractors, including details about the number of cylinders, displacement, power output, cooling system, lubrication system, and other key engine components. It offers technical information on the F5DFL413C*A003, F5DFL413B*A006, and F5DFL413B*A002 engines across various operating parameters.
New Holland T5.105 Tractor Service Repair Manual.pdff8seujdjkddm
This service manual section provides specifications for the engines used in CNH T5.95, T5.105, and T5.115 tractors, including details about the number of cylinders, displacement, power output, cooling system, lubrication system, and other key engine components. It offers technical information on the F5DFL413C*A003, F5DFL413B*A006, and F5DFL413B*A002 engines across various operating parameters.
New Holland T5.105 Electro Command Tractor Service Repair Manual.pdff8seujdjkddm
1. Refit belts on alternator and compressor pulley and adjust tension.
2. Reposition compressor and belt, ensuring belt is seated in all pulleys.
3. Apply sealing compound and reconnect engine to gearbox.
4. Reconnect all wiring harnesses, hoses, lines, and sensors to the engine.
5. Refit components like the starter motor, battery, filters, and brackets.
6. Check all fasteners and fluid levels after installation is complete.
New Holland T5.95 Electro Command Tractor Service Repair Manual.pdff8seujdjkddm
1. Refit belts on alternator and compressor pulley and adjust tension.
2. Reposition compressor and belt, ensuring belt is seated in all pulleys.
3. Apply sealing compound and install engine/front axle assembly to gearbox, turning crankshaft for alignment.
4. Reconnect all wiring harnesses, hoses, lines, and sensors to the engine and surrounding components.
New Holland LW110B Wheel Loader Service Repair Manual.pdff8seujdjkddm
This document provides instructions for removing and installing an engine and radiator on a New Holland Construction LW 110.B wheel loader. The 3-step process includes: 1) preparing the machine by lowering attachments, releasing pressures, and disconnecting batteries; 2) attaching lifting devices to the engine compartment and removing panels; and 3) removing engine and radiator components and installing the new engine.
New Holland W300C Wheel Loader Service Repair Manual.pdff8seujdjkddm
This document is a service manual for CNH Italia S.p.A. wheel loaders models W270C and W300C. It contains instructions and specifications for servicing and repairing components of the wheel loaders. The manual is divided into tabs covering general information, engines, fuel system, electrical systems, steering, powertrain, brakes, hydraulics, and mounted equipment. The document provided is the table of contents, which lists each section number and title. It does not contain any repair or service instructions.
New Holland W230C Tier 4 Wheel Loader Service Repair Manual.pdff8seujdjkddm
This document provides instructions for removing the engine from a wheel loader. It involves marking components for reinstallation, draining fluids like coolant and oil, disconnecting batteries, and using lifting straps to remove the engine. Removal requires proper safety procedures and draining of hydraulic pressure before disconnecting hoses and electrical connections.
New Holland W270C Wheel Loader Service Repair Manual.pdff8seujdjkddm
This document is a service manual for CNH Italia S.p.A. wheel loaders models W270C and W300C. It contains instructions and specifications for servicing and repairing components of the wheel loaders. The manual is divided into tabs covering general information, engines, fuel system, electrical systems, steering, powertrain, brakes, hydraulics, and mounted equipment. The document provides an index of sections for each component system and instructions for tasks like removing and installing engines, radiators, transmissions, hydraulic pumps and more. Safety practices and torque specifications are also included.
New Holland W270C Tier 4 Wheel Loader Service Repair Manual.pdff8seujdjkddm
This document is a service manual for a wheel loader that provides specifications and repair instructions. It contains sections on the engine, transmission, drivetrain, brakes, hydraulics, frames, steering, wheels, cab controls, electrical systems, attachments, and bodywork. The introduction provides conversion tables between metric and imperial units as well as torque specifications for fasteners.
New Holland W190C Tier 4A (interim) Wheel Loader Service Repair Manual.pdff8seujdjkddm
This service manual provides specifications and repair information for Tier 4A interim wheel loaders. It covers the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, front loader, bucket, cab, and decals. The manual includes an introduction on safety rules and product identification.
New Holland W190C Tier 4 Wheel Loader Service Repair Manual.pdff8seujdjkddm
- Drain engine oil and coolant from the machine. Disconnect batteries.
- Remove hood by disconnecting wiring harness, removing hinge bolts, and lifting with nylon strap through exhaust stack.
- Disconnect engine wiring harness, air intake hoses, exhaust pipes, and drive belt. Remove cooler hoses and air conditioning connections if equipped.
- The engine can now be lifted out after these removal steps are completed.
New Holland W190C Wheel Loader Service Repair Manual.pdff8seujdjkddm
This section of the service manual provides instructions for removing and installing the engine and radiator on a W190C Wheel Loader. The engine removal process involves disconnecting battery cables, draining fluids, removing mounting brackets and the drive belt. Engine installation is the reverse of removal. Radiator removal involves draining coolant and disconnecting hoses, while installation reconnects all components.
New Holland W170B Wheel Loader Service Repair Manual.pdff8seujdjkddm
This document provides instructions for removing the engine from a wheel loader. It outlines 24 steps, including draining fluids, disconnecting hoses and wiring, and removing mounting hardware. The engine and radiator are removed together. Lifting straps are used to safely raise the hood for improved access during removal.
New Holland W170C Wheel Loader Service Repair Manual.pdff8seujdjkddm
This section provides instructions for removing and installing the engine and radiator on a W170C Wheel Loader. The engine removal process involves disconnecting battery cables, draining fluids, removing mounted components, and using an overhead hoist to lift the engine from the machine. Installation is largely the reverse process. Radiator removal involves draining coolant and removing mounting hardware, while installation reconnects hoses and mounts the radiator back in place.
New Holland W110C Tier 4 Wheel Loader Service Repair Manual.pdff8seujdjkddm
This document provides instructions for removing the engine from a W110C Wheel Loader. Key steps include: parking the machine safely, discharging pressure from hydraulic and brake systems, disconnecting batteries, draining coolant and oil, loosening hood lift cylinders, and using lifting straps to raise the hood and access the engine. A solid steel bar is then used to lift the engine out after removing attachment points. The summary provides an overview of the process for safely removing the engine.
New Holland W130C Tier 4 Wheel Loader Service Repair Manual.pdff8seujdjkddm
This section describes the removal and installation procedures for the engine and radiator on a W130C wheel loader. The key steps for engine removal include disconnecting batteries, draining fluids, removing mounting brackets and hoses. Installation is the reverse of removal. Radiator removal involves disconnecting hoses and electrical connections, and removing mounting bolts. Installation is also the reverse of removal. Torque specifications are provided for critical fasteners.
New Holland W80BTC Wheel Loader Service Repair Manual.pdff8seujdjkddm
This document provides safety instructions and technical specifications for a repair manual. It outlines general safety precautions for working on equipment, including stopping the engine and relieving hydraulic pressure before removing parts. Emergency procedures and required safety equipment are also described. Technical specifications and contact information are provided for questions.
New Holland W70BTC Wheel Loader Service Repair Manual.pdff8seujdjkddm
This document provides safety instructions and technical specifications for a repair manual. It outlines general safety precautions for working on equipment, including stopping the engine and relieving hydraulic pressure before removing parts. Emergency procedures and required safety equipment are also described. Technical specifications and contact information are provided for questions.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
7. INTRODUCTION
International symbols – Conversion factors
Metric to U.S.
Multiply By To obtain
Sq. meter 10.763 91 Square foot
Area
Hectare 2.471 05 Acre
Newton 3.596 942 Ounce force
Force
Newton 0.224 809 Pound force
Millimeter 0.039 370 Inch
Meter 3.280 840 Foot
Length
Kilometer 0.621 371 Mile
Mass Kilogram 2.204 622 Pound
Mass/Area Kilogram/hectare 0.000 466 Ton/acre
Mass/Energy gr/kW/hr. 0.001 644 lbs/hp/hr.
Mass/Volume Kg/cubic meter 1.685 555 lb/cubic yd.
Power Kilowatt 1.341 02 Horsepower
Kilopascal 0.145 038 lb/sq. inch
Pressure
Bar 14.50385 lb/sq. inch
Temperature Degree C 1.8 x C +32 Degree F
Newton meter 8.850 748 lb/inch
Torque
Newton meter 0.737 562 lb/foot
Velocity Kilometer/hr. 0.621 371 Miles/hr.
Cubic centimeter 0.061 024 Cubic inch
Cubic meter 35.314 66 Cubic foot
Cubic meter 1.307 950 Cubic yd.
Milliliter 0.033 814 Ounce (US fluid)
Litre 1.056 814 Quart (US liquid)
Litre 0.879 877 Quart (Imperial)
Litre 0.264 172 Gallon (US liquid)
Volume
Litre 0.219 969 Gallon (Imperial)
Litre/min. 0.264 172 Gallon/min. (US liquid)
Volume/time
Litre/min. 0.219 969 Gallon/min. (Imperial)
U.S. to Metric
Multiply By To obtain
Square foot 0.092 903 Square meter
Are
Acre 0.404 686 Hectare
Ounce force 0.278 014 Newton
Force
Pound force 4.448 222 Newton
Inch 25.4 * Millimeter
Foot 0.304 8 * Meter
Length
Mile 1.609 344 * Kilometer
Pound 0.453 592 Kilogram
Mass
Ounce 28.35 Gram
Mass/Area Ton/acre 2241 702 Kilogram/hectare
Mass/Energy lb/hp/hr 608.277 4 gr/kW/hr
Mass/Volume lb/cubic yd. 0.593 276 kg/cubic meter
Powe Horsepower 0.745 700 Kilowatt
lbs/sq. in. 6.894 757 Kilopascal
lbs/sq. in. 0.069 Bar
Pressure
lbs/sq. in. 0.070 303 Kg/sq. cm
Temperature Degree F 1.8 F - 32 Degree C
Pound/inch 0.112 985 Newton meter
Torque
Pound/foot 1.355 818 Newton meter
Velocity Miles/hr. 1.609 344 * Kilometer/hr.
84547255C 15/03/2013
3
13. INTRODUCTION
Basic instructions
Coolant solution
Put only ethylene-glycol coolant solution in the cooling system. Use good quality ethylene-glycol that has a high
boiling point with no additives to prevent leakage. Do not use non-approved anti-rust additives. Anti-rust additives
and ethylene-glycol can mix and work against each other, reducing anti-corrosion protection, forming deposits in the
cooling system, and causing damage to the cooling system and radiator. Contact your Dealer who can supply you
with the suitable coolant solution.
Anti-freeze/Anti-corrosion
Use anti-freeze in all seasons to protect the cooling system from corrosion and risk of freezing. For areas where the
ambient temperature is over -36 °C (-32.8 °F) use a blend of 50% ethylene-glycol based anti-freeze.
For areas where the temperature is below -36 °C (-32.8 °F) - it is advisable to use a blend of 40% water and 60%
anti-freeze.
Fuel
Use diesel fuel suitable for the ambient temperature conditions ( ASTM D975).
Use fuel which is to ASTM (American Society for Testing and Materials) D975 standard (North America). In Europa,
fuel must comply with specification standard EN 590 or ITS EQUIVALENT.
Use grade No. 2 fuel. The use of other types of fuel can result in a loss of power of the engine and may cause high
fuel consumption.
In very low ambient temperatures, use a mixture of fuels No. 1 and No. 2 as necessary. Consult your fuel supplier
for appropriate fuel supply.
If the temperature falls below the fuel cloud point (point at which wax begins to form) the wax crystals will cause power
loss or will prevent the engine from starting.
In cold weather, fill the fuel tank at the end of the day's work in order to prevent the formation of condensation.
Engine oil
NEW HOLLAND AMBRA UNITEK CJ-4 ENGINE OIL SAE
15W-40 is recommended for your engine. This oil insures
correct lubrication of your engine in all working conditions.
See General specification () to choose the correct oil for
climate/temperatures.
If NEW HOLLAND AMBRA UNITEK CJ-4 ENGINE OIL SAE
15W-40 cannot be obtained, use only oil of the API CI4
category.
NOTE: Do not put any performance additive or other ad-
ditive in the sump. Oil change intervals shown in this
manual are based on tests carried out utilizing NEW HOL-
LAND CONSTRUCTION lubricants.
LELI12WL30004AA 1
Fuel storage
Prolonged storage of fue l can lead to the accumulation of impurities and condensation in the fuel. Engine trouble can
often be traced to the presence of water in the fuel.
The storage tank must be placed outside and the temperature of the fuel should be kept as low as possible. Drain off
water and impurities regularly.
84547255C 15/03/2013
9
14. INTRODUCTION
Hydraulic fluid
NEW HOLLAND AMBRA HYDROSYSTEM 46 HV is specifically designed for high pressure applications and for NEW
HOLLAND CONSTRUCTION hydraulic systems. Your NEW HOLLAND CONSTRUCTION Dealer can provide hy-
draulic fluid to fulfill different climate/temperature conditions. Refer to the General specification ().
Transmission component oil
Extreme pressure oil should be used for enclosed transmission components. Choose an oil that is manufactured for
your climate/temperature conditions such as NEW HOLLAND AMBRA MULTI G 134™ HYDRAULIC TRANSMISSION OIL.
See General specification ().
Grease
The type of grease to use depends on ambient temperature such as: NEW HOLLAND AMBRA GR 75 MD.
Environment
Before you service this machine and dispose of oil, fluids, and lubricants, obey environmental regulations. Do not
drain oil or fluids on to the ground or into containers that leak. Check with your local environmental, recycling center
or your Dealer for correct disposal information.
84547255C 15/03/2013
10
16. Engine - Engine and crankcase
Engine - General specification
Engine W/4 speed trans.
A. Idle RPM 870 - 930 RPM
Alternate low idle 570 - 630 RPM
Alternate accelerated idle 1170 - 1230 RPM
B. Maximum no load 2162 - 2212 RPM
C. Converter stall 1st gear 1970 RPM - 2nd/4th gear 2075 RPM
D. Hydraulic stall 1885 - 2195 RPM
E. Converter & hydraulic stall 1665 RPM
NOTE: Hydraulic stall and converter & hydraulic stall RPM values are read while the lift arms are rising with the bucket
held rolled back and the engine at WOT in max power mode.
84547255C 15/03/2013
10.1 [10.001] / 3
17. Engine - Engine and crankcase
Engine - Overview – Stall tests
Instrument cluster displays
1. With the engine running, press the up or down key
and scroll through the information screens and trip
screens. The following sequence is using the down
key only.
NOTE: Pressing the escape key will return the LCD back
to the normal driving screen.
2. From the driving screen push the down arrow, as
shown.
LEPH12WL30050AA 1
3. “Info 1” is the first information screen using the down
arrow from the driving screen. It displays engine
RPM’s, speed, fuel level, and the Urea level.
LELI12WL30051AA 2
4. “Info 2” will be displayed next. The “Info 2” screen will
display coolant temperature, turbocharger air temper-
ature, engine oil temperature in either Fahrenheit or
Celsius, and the Urea level.
LELI12WL30052AA 3
84547255C 15/03/2013
10.1 [10.001] / 4
18. Engine - Engine and crankcase
5. Push the down button again and the “Info 3” screen.
This screen displays the temperature in Fahrenheit or
Celsius of the transmission oil, hydraulic oil, sump oil,
and the Urea level.
LELI12WL30053AA 4
6. Push the down key again to display the “info 4” screen.
This screen display the voltage level, turbocharger air
temperature, Urea temperature and Urea level.
LELI12WL30054AA 5
7. Press the down button again and the “Trip 1” screen
will display. The LCD provides two trip computers.
These will display since last reset the total time in
hours, the total fuel, and the average fuel consump-
tion per hour.
LELI12WL30055AA 6
8. By continuing to scroll down, the fifth screen will dis-
play the “Trip 2” screen. “Trip 1” and “Trip 2” screens
can be reset independently. The previous screen can
be accessed by using the up arrow key.
LELI12WL30056AA 7
84547255C 15/03/2013
10.1 [10.001] / 5
19. Engine - Engine and crankcase
Engine - Remove – Engine
NOTE: Put caps on the fittings and plugs in the hoses to
prevent foreign material from entering the system when dis-
connecting fuel lines or hydraulic hoses.
1. Park the machine on a level surface and lower the
bucket to the ground. Put the articulation lock (1) in
the LOCKED position.
2. Key in the RUN position, engine Off, place the pilot
control switch in the normal OPERATION position.
3. Move the loader hydraulic control handle to the raise
and lower position in order to release any hydraulic
pressure in the lift circuit.
4. Move the loader control handle in and out of the tilt
position several times, this will relieve any pressure
in the pilot accumulator.
5. Release the pressure in the ride control accumulator
with the bleeder valve in the ride control valve.
6. Depress the brake pedal several times to discharge
brake accumulators.
7. Slowly loosen the filler cap on the hydraulic oil tank
to release air pressure.
LELI12WL30005AB 1
8. Put the master disconnect switch (1) in the “OFF”
position.
9. Drain the engine radiator coolant.
10. Drain the engine oil.
LELI12WL30006AB 2
11. Loosen the hose clamp (1) on the air box snorkel
under the air inlet hood.
LELI12WL30007AB 3
84547255C 15/03/2013
10.1 [10.001] / 6
20. Engine - Engine and crankcase
12. Remove the mounting bolts on the exhaust stack
hood. Attach lifting equipment to the exhaust stack.
Remove the exhaust stack hood (1).
LELI12WL30008AB 4
13. Remove the SCR line support bracket (1).
LELI12WL30009AB 5
14. Disconnect the deaeration tank overflow hose (2).
Remove the P-clamps (1) that secure the overflow hose
to the wall and brackets. Position the overflow hose away
from the engine and engine wall.
LELI12WL30010AB 6
15. Remove the left bracket (1) and right bracket (2).
LELI12WL30011AB 7
84547255C 15/03/2013
10.1 [10.001] / 7
21. Engine - Engine and crankcase
16. Remove the hydraulic oil lines (1).
LELI12WL30012AB 8
17. Remove the after air cooler tube (1).
Remove the bulkheads (2).
LELI12WL30013AB 9
18. Remove the oil dipstick P-clamp (3). Pull the oil dip-
stick tube (1) through the wall.
Label and disconnect the hood lift strut electrical connector
(2).
LELI12WL30014AB 10
19. Remove the before air coller tube (1).
Remove the upper radiator tube (2).
LELI12WL30015AB 11
84547255C 15/03/2013
10.1 [10.001] / 8
22. Engine - Engine and crankcase
20. Label and disconnect the humidity sensor electrical
connector (1). Remove the turbo inlet tube (2).
Label and disconnect the air filter restriction sensor electri-
cal connector (3).
LELI12WL30016AB 12
21. Remove the wire harness P-clamp (1).
Loosen the hose clamp on the air box snorkel (2).
Disconnect the air box snorkel (3).
LELI12WL30017AB 13
22. Remove the lower, right panel (1) on the engine wall.
LELI12WL30018AB 14
23. Remove the air box assembly.
LELI12WL30019AA 15
84547255C 15/03/2013
10.1 [10.001] / 9
23. Engine - Engine and crankcase
24. Remove the lower radiator tube (1).
LELI12WL30020AB 16
25. Attach lifting equipment to the engine wall. Remove
the engine wall’s hold-down bolts. Lift and remove
the engine wall.
LELI12WL30021AA 17
26. Remove the turbo exhaust tube (1).
LELI12WL30022AB 18
27. Disconnect the SCR coolant solenoid heater hose
(1).
LELI12WL30023AB 19
84547255C 15/03/2013
10.1 [10.001] / 10
24. Engine - Engine and crankcase
28. Remove two bolts (2), washers (3), and nuts (4).
Remove the air box snorkel (1).
LELI12WL30024AB 20
29. Disconnect the inlet and outlet heater core heater
hoses (1).
LELI12WL30025AB 21
30. Disconnect the starter battery cables (1) and starter
switch wire (2).
LELI12WL30026AB 22
31. Disconnect the following from the crank case venti-
lation/fuel filter bracket assembly:
• Fuel pump electrical connector
• Water sensor electrical connector
• Ground wire
• Wire harness P-clamp
• Crank case filter inlet hose
• Crank case filter outlet hose
• Crank case filter oil return hose
• Fuel pump inlet tube
• Fuel pump outlet tube
LELI12WL30027AA 23
32. Remove the crank case ventilation/fuel filter bracket
assembly.
84547255C 15/03/2013
10.1 [10.001] / 11
25. Engine - Engine and crankcase
33. Label and disconnect the engine control module
electrical connector (1).
LELI12WL30028AB 24
34. Disconnect the fuel return line (1). Disconnect the
battery positive wire (2) on the air grid heater.
LELI12WL30029AB 25
35. Disconnect the engine ground wires (1).
Remove the wire harness P-clamp (2).
LELI12WL30030AB 26
36. Remove the engine serpentine belt (1).
LELI12WL30031AC 27
84547255C 15/03/2013
10.1 [10.001] / 12
26. Engine - Engine and crankcase
37. Label and disconnect the A/C compressor electrical
connector (1).
Label and disconnect the A/C pressure switch electrical
connector (4).
Remove the alternator power wire (3). Label and discon-
nect the bulk electrical connector (5).
Remove the A/C compressor (2). Position the A/C com-
pressor (2) away from the engine.
LELI12WL30032AB 28
38. Remove the wire harness P-clamps (1).
LELI12WL30033AB 29
39. Remove the engine oil drain tube (1).
LELI12WL30034AB 30
40. Attach lifting equipment to the engine. Support the
engine.
LELI12WL30035AA 31
84547255C 15/03/2013
10.1 [10.001] / 13
27. Engine - Engine and crankcase
41. Remove the hydraulic oil return tube P-clamp (1).
Position the hydraulic oil return tube away from the con-
verter housing cover plate.
LELI12WL30036AB 32
42. Remove the converter housing cover plate (1).
LELI12WL30037AB 33
43. Remove the flex plate bolts (1).
LELI12WL30038AB 34
44. Remove the harmonic balancer (1).
LELI12WL30039AB 35
84547255C 15/03/2013
10.1 [10.001] / 14
28. Engine - Engine and crankcase
45. Remove the front engine mounts (1) and engine
mount plate (2).
LELI12WL30040AB 36
46. Remove the bell housing bolts (1).
LELI12WL30041AD 37
47. Remove the engine.
LELI12WL30035AA 38
84547255C 15/03/2013
10.1 [10.001] / 15
29. Engine - Engine and crankcase
Engine - Install
1. Carefully lower the engine into the chassis.
LELI12WL30035AA 1
2. Install the bell housing bolts (1). Tighten the bell
housing bolts (1) to a torque of 54 - 60 N·m (40 -
44 lb ft).
LELI12WL30041AB 2
3. Install the engine mount plate (5) and the engine
mount brackets (1), but do not tighten the bolts to
a torque value.
Tighten the engine bracket upper bolts (2) to a torque of
171 - 231 N·m (126 - 170 lb ft). Tighten the engine bracket
lower bolts (3) to a torque of 69 - 80 N·m (51 - 59 lb ft).
Tighten the engine mount plate bolts (4) to a torque of 386
- 434 N·m (285 - 320 lb ft). Tighten the engine bracket-to-
engine mount plate bolts (6) to a torque of 397 - 447 N·m
(293 - 330 lb ft).
LELI12WL30042AB 3
4. Install the harmonic balancer (1). Tighten the har-
monic balancer bolts (2) to a torque of 115 N·m (85
lb ft).
LELI12WL30043AB 4
84547255C 15/03/2013
10.1 [10.001] / 16
30. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
31. Engine - Engine and crankcase
5. Install the flex plate bolts (1). Tighten the flex plate
bolts (1) to a torque of 33 - 41 N·m (24 - 30 lb ft).
LELI12WL30044AB 5
6. Apply DOW 732 RTV SILICONE CLEAR to the con-
verter housing cover plate (1).
Install the converter housing cover plate (1).
LELI12WL30037AB 6
7. Connect the inlet and outlet heater core heater hoses
(1).
LELI12WL30025AB 7
8. Reposition the hydraulic oil return tube. Install the
hydraulic oil return tube P-clamp (1).
LELI12WL30036AB 8
84547255C 15/03/2013
10.1 [10.001] / 17
32. Engine - Engine and crankcase
9. Install the air box snorkel (1). Install two bolts (2),
washers (3), and nuts (4).
LELI12WL30024AB 9
10. Connect the SCR coolant solenoid heater hose (1).
LELI12WL30023AB 10
11. Install the turbo exhaust tube (1).
LELI12WL30022AB 11
12. Remove lifting equipment from the engine.
LELI12WL30035AA 12
84547255C 15/03/2013
10.1 [10.001] / 18
33. Engine - Engine and crankcase
13. Install the engine wall.
LELI12WL30021AA 13
14. Install the lower radiator tube (1).
LELI12WL30020AB 14
15. Install the air box.
LELI12WL30019AA 15
16. Install the wire harness P-clamp (1). Connect the air
box snorkel (3). Tighten the hose clamp on the air
box snorkel (2).
LELI12WL30017AB 16
84547255C 15/03/2013
10.1 [10.001] / 19
34. Engine - Engine and crankcase
17. Install the lower, right panel (1) on the engine wall.
LELI12WL30018AB 17
18. Install the turbo inlet tube (2).
Connect the humidity sensor electrical connector (1).
Connect the air filter restriction sensor electrical connector
(3).
LELI12WL30016AB 18
19. Install the upper radiator tube (2).
Install the before air cooler tube (1).
LELI12WL30015AB 19
20. Install the engine oil drain tube (1).
LELI12WL30034AB 20
84547255C 15/03/2013
10.1 [10.001] / 20
35. Engine - Engine and crankcase
21. Install the wire harness P-clamps (1).
LELI12WL30033AB 21
22. Install the engine serpentine belt (1).
LELI12WL30031AB 22
23. Install the A/C compressor (2).
Connect the A/C compressor electrical connector (1).
Connect the A/C pressure switch electrical connector (4).
Connect the alternator power wire (3). Connect the bulk
electrical connector (5).
LELI12WL30032AB 23
24. Connect the engine ground wires (1).
Install the wire harness P-clamp (2).
LELI12WL30030AB 24
84547255C 15/03/2013
10.1 [10.001] / 21
36. Engine - Engine and crankcase
25. Connect the fuel return line (1).
Connect the battery positive wire (2) on the air grid heater.
LELI12WL30029AB 25
26. Connect the engine control module electrical con-
nector (1).
LELI12WL30028AB 26
27. Install the crank case ventilation/fuel filter bracket as-
sembly.
28. Connect the following on the crank case ventilation/
fuel filter bracket assembly:
• Fuel pump electrical connector
• Water sensor electrical connector
• Ground wire
• Wire harness P-clamp
• Crankcase filter inlet hose
• Crankcase filter outlet hose
• Crankcase filter oil return hose
• Fuel pump inlet tube
• Fuel pump outlet tube
LELI12WL30027AA 27
29. Connect the starter battery cables (1) and starter
switch wire (2).
LELI12WL30026AB 28
84547255C 15/03/2013
10.1 [10.001] / 22