- This document contains safety warnings and instructions for servicing agricultural equipment.
- It instructs technicians to turn off the engine, set the parking brake, block the wheels, and remove keys before servicing to prevent injury.
- Warnings advise wearing proper protective equipment like hard hats and gloves, and operating controls only from the operator's seat.
This document provides information on service tools for various sections of a JCB service manual. It lists tools for working on the body and framework, electrics, and hydraulics systems of JCB machines. Specifically, it outlines pressure test adapters and gauges for checking hydraulic systems, as well as tools for installing glass, cutting wiring harnesses, and checking electrical components. Safety equipment like gloves and stands are also mentioned.
Yanmar ym240 d tractor service repair manualfjjsfkskemem
This shop manual provides specifications and repair procedures for Yanmar tractor models YM135, YM135D, YM155, YM155D, YM195, YM195D, YM240, YM240D, YM330, and YM330D. The manual includes an index of components and systems covered, condensed service data tables listing specifications for each model, procedures for servicing the front axle and steering gear, and exploded views of the front axle assemblies.
New holland w130 c tier 4 wheel loader service repair manualujfjjkskkmdme
This section describes the removal and installation procedures for the engine and radiator on a W130C wheel loader. The key steps for engine removal include disconnecting batteries, draining fluids, removing mounting brackets and hoses. Installation is the reverse of removal. Radiator removal involves disconnecting hoses and electrical connections, and removing mounting bolts. Installation is also the reverse of removal. Torque specifications are provided for critical fasteners.
New holland tc45 a tractor service repair manualjjdjfkkskemme
This document is the contents page for a repair manual for New Holland TC35A, TC35DA, TC40A, TC40DA, TC45A, and TC45DA tractors. It lists the sections and chapters contained within the repair manual, including the engine, clutch, transmission, driveline, front and rear axles, brakes, hydraulic system, steering, climate control, electrical systems, and platform. The document provides an overview of the complete contents and organization of the repair manual.
Toro reelmaster 5400 d mower service repair manualufjjsjkfkemme
This document is a service manual for the Reelmaster 5200-D/5400-D. It contains chapters covering safety instructions, product records and maintenance, troubleshooting and repairs for major systems including the Kubota diesel engine, hydraulic system, electrical system, differential axle, steering and brakes, and cutting units. It provides technicians with information needed to service and repair components.
1999 infiniti qx4 service repair manualfjjksekksemm
The document is a 1999 INFINITI QX4 service manual containing maintenance and repair procedures. It includes an introduction noting that the manual should be read thoroughly for safety and vehicle functioning. Safety is emphasized as the proper performance of service procedures depends on skills, tools, and ensuring personal and vehicle safety. Conversion tables are also included to convert between inches and millimeters.
New holland ts90 tractor service repair manualfujsjfjkskekmm
The document is a repair manual containing specifications for various components of TS90, TS100, and TS110 tractor models. It includes specifications for the engine, electrical system, hydraulic system, braking and steering systems, powertrain, front axle, PTO, and air conditioning. The specifications cover areas like engine dimensions, valve sizes, piston sizes, crankshaft dimensions, transmission components, and more. The document is organized by system with each section providing detailed technical specifications to aid in repair work.
Case 721 e eu wheel loader service repair manualuuudfjjskkemmd
This document provides instructions for removing and installing the engine and radiator on a 721E wheel loader. The engine removal process involves disconnecting battery cables, draining fluids, removing mounted components, and using an engine lift to remove the engine from the loader. Engine installation is the reverse of removal. Radiator removal requires draining the coolant and removing mounting bolts, hoses and fans. Radiator installation is the reverse of removal.
This document provides information on service tools for various sections of a JCB service manual. It lists tools for working on the body and framework, electrics, and hydraulics systems of JCB machines. Specifically, it outlines pressure test adapters and gauges for checking hydraulic systems, as well as tools for installing glass, cutting wiring harnesses, and checking electrical components. Safety equipment like gloves and stands are also mentioned.
Yanmar ym240 d tractor service repair manualfjjsfkskemem
This shop manual provides specifications and repair procedures for Yanmar tractor models YM135, YM135D, YM155, YM155D, YM195, YM195D, YM240, YM240D, YM330, and YM330D. The manual includes an index of components and systems covered, condensed service data tables listing specifications for each model, procedures for servicing the front axle and steering gear, and exploded views of the front axle assemblies.
New holland w130 c tier 4 wheel loader service repair manualujfjjkskkmdme
This section describes the removal and installation procedures for the engine and radiator on a W130C wheel loader. The key steps for engine removal include disconnecting batteries, draining fluids, removing mounting brackets and hoses. Installation is the reverse of removal. Radiator removal involves disconnecting hoses and electrical connections, and removing mounting bolts. Installation is also the reverse of removal. Torque specifications are provided for critical fasteners.
New holland tc45 a tractor service repair manualjjdjfkkskemme
This document is the contents page for a repair manual for New Holland TC35A, TC35DA, TC40A, TC40DA, TC45A, and TC45DA tractors. It lists the sections and chapters contained within the repair manual, including the engine, clutch, transmission, driveline, front and rear axles, brakes, hydraulic system, steering, climate control, electrical systems, and platform. The document provides an overview of the complete contents and organization of the repair manual.
Toro reelmaster 5400 d mower service repair manualufjjsjkfkemme
This document is a service manual for the Reelmaster 5200-D/5400-D. It contains chapters covering safety instructions, product records and maintenance, troubleshooting and repairs for major systems including the Kubota diesel engine, hydraulic system, electrical system, differential axle, steering and brakes, and cutting units. It provides technicians with information needed to service and repair components.
1999 infiniti qx4 service repair manualfjjksekksemm
The document is a 1999 INFINITI QX4 service manual containing maintenance and repair procedures. It includes an introduction noting that the manual should be read thoroughly for safety and vehicle functioning. Safety is emphasized as the proper performance of service procedures depends on skills, tools, and ensuring personal and vehicle safety. Conversion tables are also included to convert between inches and millimeters.
New holland ts90 tractor service repair manualfujsjfjkskekmm
The document is a repair manual containing specifications for various components of TS90, TS100, and TS110 tractor models. It includes specifications for the engine, electrical system, hydraulic system, braking and steering systems, powertrain, front axle, PTO, and air conditioning. The specifications cover areas like engine dimensions, valve sizes, piston sizes, crankshaft dimensions, transmission components, and more. The document is organized by system with each section providing detailed technical specifications to aid in repair work.
Case 721 e eu wheel loader service repair manualuuudfjjskkemmd
This document provides instructions for removing and installing the engine and radiator on a 721E wheel loader. The engine removal process involves disconnecting battery cables, draining fluids, removing mounted components, and using an engine lift to remove the engine from the loader. Engine installation is the reverse of removal. Radiator removal requires draining the coolant and removing mounting bolts, hoses and fans. Radiator installation is the reverse of removal.
New Holland TJ275 Tractor Service Repair Manual.pdfyfjskemdmdm
The document provides safety warnings and instructions, emphasizing the importance of reading manuals, wearing proper protective equipment, operating machines only from the operator's seat, and ensuring areas are clear before starting engines or performing service work such as removing keys and blocking wheels. Proper safety protocols are necessary to prevent injury when operating or servicing agricultural equipment.
New Holland TJ450 Tractor Service Repair Manual.pdfyfjskemdmdm
The document provides safety warnings and instructions, emphasizing the importance of reading manuals, wearing proper protective equipment, operating machines only from the operator's seat, and ensuring the machine is safely secured before performing any service or repairs. Proper safety protocols are critical to prevent injury when working on or operating agricultural equipment.
New Holland TJ375 Tractor Service Repair Manual.pdfyfjskemdmdm
The document provides safety warnings and instructions, emphasizing the importance of reading the operator's manual, operating controls only from the seat, not allowing riders, studying safety messages before starting the engine, wearing proper protective clothing, and placing a "Do Not Operate" tag on the key when removing it for service or repair work. Proper maintenance and parking procedures are also outlined.
New Holland TJ325 Tractor Service Repair Manual.pdfyfjskemdmdm
The document provides safety warnings and instructions, emphasizing the importance of reading the operator's manual, operating controls only from the seat, not allowing riders, studying safety messages before starting the engine, wearing proper protective clothing, and placing a "Do Not Operate" tag on the key when removing it for service or repair work. Proper safety procedures such as parking on level ground, engaging the parking brake, removing the key, and blocking the wheels are also outlined.
New Holland W190C Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This section of the service manual provides instructions for removing and installing the engine and radiator on a W190C Wheel Loader. The engine removal process involves disconnecting battery cables, draining fluids, removing mounting brackets and hoses. Engine installation is the reverse of removal. Radiator removal involves draining coolant and removing mounting brackets, and radiator installation is the reverse of removal. Refer to the engine service manual for any engine repairs.
New Holland W190C Wheel Loader Service Repair Manual.pdfgan51huishu
This section of the service manual provides instructions for removing and installing the engine and radiator on a W190C Wheel Loader. The engine removal process involves disconnecting battery cables, draining fluids, removing mounting brackets and the drive belt. Engine installation is the reverse of removal. Radiator removal involves draining coolant and disconnecting hoses, while installation reconnects all hoses and refills the coolant.
New Holland W190C Wheel Loader Service Repair Manual.pdffusedkdd9idi
This section of the service manual provides instructions for removing and installing the engine and radiator on a W190C Wheel Loader. The engine removal process involves disconnecting battery cables, draining fluids, removing mounting brackets and hoses. Engine installation is the reverse of removal. Radiator removal involves draining coolant and removing mounting brackets, and installation is the reverse of removal.
New holland w190 c wheel loader service repair manualujdjjkkskmme
This section of the service manual provides instructions for removing and installing the engine and radiator on a W190C Wheel Loader. The engine removal process involves disconnecting battery cables, draining fluids, removing mounting brackets and hoses. Engine installation is the reverse of removal. Radiator removal involves draining coolant and removing mounting brackets, and installation is the reverse of removal.
New holland w190 c wheel loader service repair manualfjskkksmemm
This section of the service manual provides instructions for removing and installing the engine and radiator on a W190C Wheel Loader. The engine removal process involves disconnecting battery cables, draining fluids, removing mounting brackets and the drive belt. Engine installation is the reverse of removal. Radiator removal involves draining coolant and disconnecting hoses, while installation reconnects all hoses and refills the coolant.
New Holland W190C Wheel Loader Service Repair Manual.pdfhmc151121
This section of the service manual provides instructions for removing and installing the engine and radiator on a W190C Wheel Loader. The engine removal process involves disconnecting battery cables, draining fluids, removing mounting brackets and the drive belt. Engine installation is the reverse of removal. Radiator removal involves draining coolant and disconnecting hoses, while installation reconnects all hoses and refills the coolant.
New Holland W190C Wheel Loader Service Repair Manual.pdffujksekd9dokd
This section of the service manual provides instructions for removing and installing the engine and radiator on a W190C Wheel Loader. The engine removal process involves disconnecting battery cables, draining fluids, removing mounting brackets and hoses. Engine installation is the reverse of removal. Radiator removal involves draining coolant and removing mounting brackets, and radiator installation is the reverse of removal. Refer to the engine service manual for any engine repairs.
New holland w190 c wheel loader service repair manualfujsjfjksekem
This section of the service manual provides instructions for removing and installing the engine and radiator on a W190C Wheel Loader. The engine removal process involves disconnecting battery cables, draining fluids, removing mounting brackets and the drive belt, then lifting the engine from the machine. Engine installation is the reverse of removal. Radiator removal involves draining coolant and disconnecting hoses, then removing mounting bolts to lift it out.
New Holland W190C Wheel Loader Service Repair Manual.pdff8seujdjkddm
This section of the service manual provides instructions for removing and installing the engine and radiator on a W190C Wheel Loader. The engine removal process involves disconnecting battery cables, draining fluids, removing mounting brackets and the drive belt. Engine installation is the reverse of removal. Radiator removal involves draining coolant and disconnecting hoses, while installation reconnects all components.
New Holland W190C Wheel Loader Service Repair Manual.pdffusjekkdkdme3
This section of the service manual provides instructions for removing and installing the engine and radiator on a W190C Wheel Loader. The engine removal process involves disconnecting battery cables, draining fluids, removing mounting brackets and hoses. Engine installation is the reverse of removal. Radiator removal involves draining coolant and removing mounting brackets, and radiator installation is the reverse of removal. Refer to the engine service manual for any engine repairs.
New holland w190 c wheel loader service repair manualfujsjefkskekmem
This section of the service manual provides instructions for removing and installing the engine and radiator on a W190C Wheel Loader. The engine removal process involves disconnecting battery cables, draining fluids, removing mounting brackets and hoses. Engine installation is the reverse of removal. Radiator removal involves draining coolant and removing mounting brackets, and radiator installation is the reverse of removal. Refer to the engine service manual for any engine repairs.
New holland w130 c tier 4 wheel loader service repair manualfjkskmmdmme
This section describes the removal and installation procedures for the engine and radiator on a W130C wheel loader. The key steps for engine removal include disconnecting batteries, draining fluids, removing accessories, and using an engine lifting fixture to remove the engine from the vehicle. Installation is largely the reverse of removal. Procedures for radiator removal include draining coolant and removing mounting brackets, and installation is the reverse of removal. Torque specifications are provided for relevant fasteners.
New Holland W130C Tier 4 Wheel Loader Service Repair Manual.pdffusedkdd9idi
This section describes the removal and installation procedures for the engine and radiator on a W130C wheel loader. The key steps for engine removal include disconnecting batteries, draining fluids, removing mounting brackets and hoses. Installation is the reverse of removal. Radiator removal involves disconnecting hoses and electrical connections, and removing mounting bolts. Installation is also the reverse of removal. Torque specifications are provided for critical fasteners.
New Holland W130C Tier 4 Wheel Loader Service Repair Manual.pdfcheng576587ce
This section describes the removal and installation procedures for the engine and radiator on a W130C wheel loader. The key steps for engine removal include disconnecting batteries, draining fluids, removing accessories, and using an engine lifting fixture to remove the engine from the vehicle. Installation is largely the reverse of removal. Procedures for radiator removal include draining coolant and removing mounting brackets, and installation is the reverse of removal. Torque specifications are provided for relevant fasteners.
New holland w130 c tier 4 wheel loader service repair manual instant downloadudfjsjjekkekmem
This section describes the removal and installation procedures for the engine and radiator on a W130C wheel loader. The key steps for engine removal include disconnecting batteries, draining fluids, removing accessories, and using an engine lifting fixture to remove the engine from the vehicle. Installation is largely the reverse of removal. Procedures for radiator removal include draining coolant and removing mounting brackets, and installation is the reverse of removal. Torque specifications are provided for reinstalling components.
New Holland W130C Tier 4 Wheel Loader Service Repair Manual.pdffujksekd9dokd
This section describes the removal and installation procedures for the engine and radiator on a W130C wheel loader. The key steps for engine removal include disconnecting batteries, draining fluids, removing mounting brackets and hoses. Installation is the reverse of removal. Radiator removal involves disconnecting hoses and electrical connections, then removing mounting bolts. Installation is also reverse of removal. Torque specifications are provided for correct reinstallation of components.
New holland tv145 tractor service repair manualfujskefksmem
This document provides a table of contents for a repair manual for a TV145 tractor. It lists over 30 sections and chapters that will be included in the manual, covering topics like the engine, transmissions, axles, brakes, hydraulics, wheels, ballasting, frames, climate control, electrical systems, accessories, and the cab. The sections and chapters are organized by book number, section number, and chapter number for easy reference to the specific information needed when repairing components of the tractor.
Massey ferguson mf 355 tractor service parts catalogue manual (part number 8...fujskefksmem
This document provides part numbers and descriptions for components of a Massey Ferguson 355 tractor with serial number 819749. It includes sections on the engine installation, cylinder block, crankshaft and pistons, and cylinder head. The document lists part numbers, quantities, descriptions and additional comments for over 50 individual components.
More Related Content
Similar to New holland tj275 tractor service repair manual
New Holland TJ275 Tractor Service Repair Manual.pdfyfjskemdmdm
The document provides safety warnings and instructions, emphasizing the importance of reading manuals, wearing proper protective equipment, operating machines only from the operator's seat, and ensuring areas are clear before starting engines or performing service work such as removing keys and blocking wheels. Proper safety protocols are necessary to prevent injury when operating or servicing agricultural equipment.
New Holland TJ450 Tractor Service Repair Manual.pdfyfjskemdmdm
The document provides safety warnings and instructions, emphasizing the importance of reading manuals, wearing proper protective equipment, operating machines only from the operator's seat, and ensuring the machine is safely secured before performing any service or repairs. Proper safety protocols are critical to prevent injury when working on or operating agricultural equipment.
New Holland TJ375 Tractor Service Repair Manual.pdfyfjskemdmdm
The document provides safety warnings and instructions, emphasizing the importance of reading the operator's manual, operating controls only from the seat, not allowing riders, studying safety messages before starting the engine, wearing proper protective clothing, and placing a "Do Not Operate" tag on the key when removing it for service or repair work. Proper maintenance and parking procedures are also outlined.
New Holland TJ325 Tractor Service Repair Manual.pdfyfjskemdmdm
The document provides safety warnings and instructions, emphasizing the importance of reading the operator's manual, operating controls only from the seat, not allowing riders, studying safety messages before starting the engine, wearing proper protective clothing, and placing a "Do Not Operate" tag on the key when removing it for service or repair work. Proper safety procedures such as parking on level ground, engaging the parking brake, removing the key, and blocking the wheels are also outlined.
New Holland W190C Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This section of the service manual provides instructions for removing and installing the engine and radiator on a W190C Wheel Loader. The engine removal process involves disconnecting battery cables, draining fluids, removing mounting brackets and hoses. Engine installation is the reverse of removal. Radiator removal involves draining coolant and removing mounting brackets, and radiator installation is the reverse of removal. Refer to the engine service manual for any engine repairs.
New Holland W190C Wheel Loader Service Repair Manual.pdfgan51huishu
This section of the service manual provides instructions for removing and installing the engine and radiator on a W190C Wheel Loader. The engine removal process involves disconnecting battery cables, draining fluids, removing mounting brackets and the drive belt. Engine installation is the reverse of removal. Radiator removal involves draining coolant and disconnecting hoses, while installation reconnects all hoses and refills the coolant.
New Holland W190C Wheel Loader Service Repair Manual.pdffusedkdd9idi
This section of the service manual provides instructions for removing and installing the engine and radiator on a W190C Wheel Loader. The engine removal process involves disconnecting battery cables, draining fluids, removing mounting brackets and hoses. Engine installation is the reverse of removal. Radiator removal involves draining coolant and removing mounting brackets, and installation is the reverse of removal.
New holland w190 c wheel loader service repair manualujdjjkkskmme
This section of the service manual provides instructions for removing and installing the engine and radiator on a W190C Wheel Loader. The engine removal process involves disconnecting battery cables, draining fluids, removing mounting brackets and hoses. Engine installation is the reverse of removal. Radiator removal involves draining coolant and removing mounting brackets, and installation is the reverse of removal.
New holland w190 c wheel loader service repair manualfjskkksmemm
This section of the service manual provides instructions for removing and installing the engine and radiator on a W190C Wheel Loader. The engine removal process involves disconnecting battery cables, draining fluids, removing mounting brackets and the drive belt. Engine installation is the reverse of removal. Radiator removal involves draining coolant and disconnecting hoses, while installation reconnects all hoses and refills the coolant.
New Holland W190C Wheel Loader Service Repair Manual.pdfhmc151121
This section of the service manual provides instructions for removing and installing the engine and radiator on a W190C Wheel Loader. The engine removal process involves disconnecting battery cables, draining fluids, removing mounting brackets and the drive belt. Engine installation is the reverse of removal. Radiator removal involves draining coolant and disconnecting hoses, while installation reconnects all hoses and refills the coolant.
New Holland W190C Wheel Loader Service Repair Manual.pdffujksekd9dokd
This section of the service manual provides instructions for removing and installing the engine and radiator on a W190C Wheel Loader. The engine removal process involves disconnecting battery cables, draining fluids, removing mounting brackets and hoses. Engine installation is the reverse of removal. Radiator removal involves draining coolant and removing mounting brackets, and radiator installation is the reverse of removal. Refer to the engine service manual for any engine repairs.
New holland w190 c wheel loader service repair manualfujsjfjksekem
This section of the service manual provides instructions for removing and installing the engine and radiator on a W190C Wheel Loader. The engine removal process involves disconnecting battery cables, draining fluids, removing mounting brackets and the drive belt, then lifting the engine from the machine. Engine installation is the reverse of removal. Radiator removal involves draining coolant and disconnecting hoses, then removing mounting bolts to lift it out.
New Holland W190C Wheel Loader Service Repair Manual.pdff8seujdjkddm
This section of the service manual provides instructions for removing and installing the engine and radiator on a W190C Wheel Loader. The engine removal process involves disconnecting battery cables, draining fluids, removing mounting brackets and the drive belt. Engine installation is the reverse of removal. Radiator removal involves draining coolant and disconnecting hoses, while installation reconnects all components.
New Holland W190C Wheel Loader Service Repair Manual.pdffusjekkdkdme3
This section of the service manual provides instructions for removing and installing the engine and radiator on a W190C Wheel Loader. The engine removal process involves disconnecting battery cables, draining fluids, removing mounting brackets and hoses. Engine installation is the reverse of removal. Radiator removal involves draining coolant and removing mounting brackets, and radiator installation is the reverse of removal. Refer to the engine service manual for any engine repairs.
New holland w190 c wheel loader service repair manualfujsjefkskekmem
This section of the service manual provides instructions for removing and installing the engine and radiator on a W190C Wheel Loader. The engine removal process involves disconnecting battery cables, draining fluids, removing mounting brackets and hoses. Engine installation is the reverse of removal. Radiator removal involves draining coolant and removing mounting brackets, and radiator installation is the reverse of removal. Refer to the engine service manual for any engine repairs.
New holland w130 c tier 4 wheel loader service repair manualfjkskmmdmme
This section describes the removal and installation procedures for the engine and radiator on a W130C wheel loader. The key steps for engine removal include disconnecting batteries, draining fluids, removing accessories, and using an engine lifting fixture to remove the engine from the vehicle. Installation is largely the reverse of removal. Procedures for radiator removal include draining coolant and removing mounting brackets, and installation is the reverse of removal. Torque specifications are provided for relevant fasteners.
New Holland W130C Tier 4 Wheel Loader Service Repair Manual.pdffusedkdd9idi
This section describes the removal and installation procedures for the engine and radiator on a W130C wheel loader. The key steps for engine removal include disconnecting batteries, draining fluids, removing mounting brackets and hoses. Installation is the reverse of removal. Radiator removal involves disconnecting hoses and electrical connections, and removing mounting bolts. Installation is also the reverse of removal. Torque specifications are provided for critical fasteners.
New Holland W130C Tier 4 Wheel Loader Service Repair Manual.pdfcheng576587ce
This section describes the removal and installation procedures for the engine and radiator on a W130C wheel loader. The key steps for engine removal include disconnecting batteries, draining fluids, removing accessories, and using an engine lifting fixture to remove the engine from the vehicle. Installation is largely the reverse of removal. Procedures for radiator removal include draining coolant and removing mounting brackets, and installation is the reverse of removal. Torque specifications are provided for relevant fasteners.
New holland w130 c tier 4 wheel loader service repair manual instant downloadudfjsjjekkekmem
This section describes the removal and installation procedures for the engine and radiator on a W130C wheel loader. The key steps for engine removal include disconnecting batteries, draining fluids, removing accessories, and using an engine lifting fixture to remove the engine from the vehicle. Installation is largely the reverse of removal. Procedures for radiator removal include draining coolant and removing mounting brackets, and installation is the reverse of removal. Torque specifications are provided for reinstalling components.
New Holland W130C Tier 4 Wheel Loader Service Repair Manual.pdffujksekd9dokd
This section describes the removal and installation procedures for the engine and radiator on a W130C wheel loader. The key steps for engine removal include disconnecting batteries, draining fluids, removing mounting brackets and hoses. Installation is the reverse of removal. Radiator removal involves disconnecting hoses and electrical connections, then removing mounting bolts. Installation is also reverse of removal. Torque specifications are provided for correct reinstallation of components.
Similar to New holland tj275 tractor service repair manual (20)
New holland tv145 tractor service repair manualfujskefksmem
This document provides a table of contents for a repair manual for a TV145 tractor. It lists over 30 sections and chapters that will be included in the manual, covering topics like the engine, transmissions, axles, brakes, hydraulics, wheels, ballasting, frames, climate control, electrical systems, accessories, and the cab. The sections and chapters are organized by book number, section number, and chapter number for easy reference to the specific information needed when repairing components of the tractor.
Massey ferguson mf 355 tractor service parts catalogue manual (part number 8...fujskefksmem
This document provides part numbers and descriptions for components of a Massey Ferguson 355 tractor with serial number 819749. It includes sections on the engine installation, cylinder block, crankshaft and pistons, and cylinder head. The document lists part numbers, quantities, descriptions and additional comments for over 50 individual components.
Massey ferguson mf 377 tractor service parts catalogue manual (part number 3...fujskefksmem
This document provides part numbers and descriptions for components of a Massey Ferguson 377 tractor engine. It includes assemblies and parts for the engine block, cylinder head, crankshaft, pistons, connecting rods, and rocker shaft. The document lists each part number, quantity, description, and any relevant comments to aid in servicing or replacing the parts. It contains detailed exploded diagrams and part lists for the major engine assemblies.
Massey ferguson mf 333 tractor service parts catalogue manual (part number 3...fujskefksmem
This document provides parts information for the engine of a Massey Ferguson 333 tractor. It includes lists of parts for the cylinder block, crankshaft, pistons, connecting rods, cylinder head, and rocker shaft of the AD3.152 engine. Each part is identified by item number, part number, quantity, description, and any relevant comments. The parts lists contain over 75 individual part items in total.
Massey ferguson mf 298 tractor (gb) service parts catalogue manual (part numb...fujskefksmem
This document provides a parts list and exploded diagrams for the engine installation and components of a Massey Ferguson 298 tractor. It includes 31 items related to the engine installation, 25 items for the cylinder block, 19 items for the crankshaft, pistons, and connecting rods, 16 items for the cylinder head, 12 items for the rocker shaft, 14 items for the timing gear and camshaft, and 16 items for the lubricating oil pump and delivery housing. Each item lists the part number, quantity, description, and any comments. Diagrams show the layout and exploded views of the engine systems.
Massey ferguson mf 298 tractor (fr) service parts catalogue manual (part numb...fujskefksmem
This document provides a parts list for the engine and accessories of a Massey Ferguson 298 tractor. It includes 24 items related to the engine, 4 items for the fan, 6 cylinder block parts, 8 crankshaft parts, 10 cylinder head parts, 12 rocker arm parts, and 14 cylinder head cover parts. The document lists each part number, quantity, description, and any additional comments for each item.
Massey ferguson mf 293 tractor service parts catalogue manual (part number 3...fujskefksmem
This document provides a parts list for a Massey Ferguson MF 293 tractor with the serial number 3310617. It includes detailed part numbers, descriptions, quantities and other information for various systems of the tractor including the cylinder block, crankshaft and flywheel, cylinder head and cover, rocker arm, timing gear, and lubricating oil system. The parts list contains over 50 individual parts grouped into relevant systems of the tractor engine and chassis.
Massey ferguson mf 290 tractor (fr) service parts catalogue manual (part numb...fujskefksmem
This document provides a parts list and descriptions for an MF 290 tractor engine. It includes 20 items related to the engine and accessories in 3 sections. The second section lists 2 items for the engine accessories from a certain date range. The third section lists 2 items for engine accessories. The document then continues listing additional parts in other sections related to the cylinder block, crankshaft, cylinder head, and other engine components.
Massey ferguson mf 283 tractor service parts catalogue manual (part number 3...fujskefksmem
This document provides a parts list and exploded diagram for the Massey Ferguson MF 283 tractor, with part numbers and descriptions for various systems including the cylinder block, crankshaft, cylinder head, rocker arm, timing gear, and lubricating oil system. It includes 49 line items with information such as part numbers, quantities, descriptions, and notes. The parts list is broken into sections for different systems and includes diagrams showing the assembly of components.
Massey ferguson 6497 tractor (tier 3) ( -- t176049) service parts catalogue m...fujskefksmem
This document provides parts information for a Massey Ferguson 6497 Tier 3 tractor. It includes 27 items related to the cylinder block, with part numbers, quantities and descriptions. It also includes 44 items related to the timing gear housing and 20 items related to the crankshaft, pistons, and connecting rods.
Massey ferguson 6490 tractor service parts catalogue manual (part number 163...fujskefksmem
This document provides a list of parts for Massey Ferguson 6485/6490 tractors. It includes 25 items with part numbers, quantities, descriptions, and comments for components of the engine including the cylinder head, cylinder block, timing gear housing, crankshaft, pistons, and valve mechanism. The list appears to be from an engine overhaul or repair manual to identify replacement parts.
Massey ferguson 6485 tractor service parts catalogue manual (part number 163...fujskefksmem
This document provides a list of parts for Massey Ferguson 6485/6490 tractors. It includes 25 items with part numbers, quantities, descriptions, and comments for components of the engine including the cylinder head, cylinder block, timing gear housing, crankshaft, pistons, and valve mechanism. The list appears to be from an engine overhaul or repair manual to identify replacement parts.
Massey ferguson 6480 tractor (tier 3 perkins engine) service parts catalogue...fujskefksmem
- The document provides parts information for a Massey Ferguson 6480 tractor with a Tier 3 Perkins engine, including part numbers, quantities, descriptions and comments.
- It lists 41 parts for the engine and equipment, with details like the clutch, fan, pulleys, engine, starter motor and labels.
- Another section lists alternator and bracket parts, including the alternator, pulleys, arm, brackets and screws.
- Further sections provide part details for the starter, fan drive section, cylinder block, timing gear and camshaft.
John deere 80 c excavator service repair technical manual (tm1939)fujskefksmem
This document provides instructions for removing and installing a front idler, as well as disassembling and assembling the front idler. Key steps include using a hoist to remove the heavy front idler, measuring wear, replacing worn parts, and ensuring proper lubrication and sealing when reassembling. Safety cautions are provided regarding the weight of components and force of recoil springs.
This document provides instructions for servicing an excavator model EL180. It begins with general information and safety precautions for reassembly. It then lists the 13 step reassembly procedure which includes installing O-rings and backup rings, pressing parts together, applying grease, and tightening bolts. After reassembly, an inspection is conducted to check for air leaks. Storage standards and procedures are also provided to prevent rust during long-term storage of parts.
This document provides instructions for servicing an excavator model EL180. It begins with general information and safety precautions for reassembly. It then lists the 13 step reassembly procedure which includes installing O-rings and backup rings, pressing components together, applying grease, and a final inspection. Next, it provides guidelines for storing components long-term, including cleaning, rust prevention, and storage methods and periods.
Caterpillar cat d8 r track type tractor dozer bulldozer (prefix rjm) service ...fujskefksmem
This document provides instructions for removing and installing track roller frames on a Caterpillar D8R track-type tractor. It outlines the required tools and safety precautions. The removal procedure involves separating the track, raising the machine with lift stands, installing a strap on the front bogie, and removing bolts to separate the front track roller frame. Instructions are provided for draining oil from the rear frame as well.
Caterpillar cat d8 r track type tractor dozer bulldozer (prefix mej) service ...fujskefksmem
The document provides instructions for disassembling the track roller frame of a D8R track-type tractor. It describes removing components such as the track rollers, idlers, bogies, cartridge pins, and seals. Tools required are listed. Detailed steps and illustrations show how to support and lift heavy parts, drain oil, and use pullers and wedges to separate interconnected pieces in a specific sequence. Safety notices warn of risks such as heavy weight and contained fluids.
Caterpillar cat d8 r track type tractor dozer bulldozer (prefix 9em) service ...fujskefksmem
This document provides instructions for servicing the steering pump on a Caterpillar D8R track-type tractor. It describes in detail how to assemble and install the steering pump. The assembly process involves installing various seals, springs, valves and other internal components in the correct order. Special tools and precautions are noted to properly protect components and ensure correct assembly. Finally, the document outlines installing the assembled pump, connecting hydraulic lines, and filling the system with oil.
Caterpillar cat 320 e l excavator (prefix ree) service repair manual (ree0000...fujskefksmem
This document provides instructions for removing and installing the front gear group on a Caterpillar C6.6 engine. It outlines the required tools and gives step-by-step procedures for locking the crankshaft, camshaft, and fuel injection pump in position before removing gears. Identification marks should be made on removed gears to ensure proper alignment upon installation. Clearances must be checked and gears lubricated after installation is complete. The instructions are intended to properly position engine components and avoid interference while maintaining fuel injection pump timing.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
4. 2
TABLE OF CONTENTS
TORQUE SPECIFICATIONS - DECIMAL HARDWARE ...................................................................................................... 2
TORQUE SPECIFICATIONS - METRIC HARDWARE ........................................................................................................ 3
TORQUE SPECIFICATIONS - STEEL HYDRAULIC FITTINGS ........................................................................................... 4
TORQUE SPECIFICATIONS - STEEL HYDRAULIC FITTINGS ........................................................................................... 5
TORQUE SPECIFICATIONS - DECIMAL HARDWARE
Use the torques in this chart when special torques are not
given. These torques apply to fasteners with both UNC and
UNF threads as received from suppliers dry, or when
lubricated with engine oil. Not applicable if special graphites,
Molydisulfide greases, or other extreme pressure lubricants
are used.
Grade 5 Bolts, Nuts, and Studs
Size
Pound-
Inches
Newton
metres
1/4 inch 108 to 132 12 to 15
5/16 inch 204 to 252 23 to 28
3/8 inch 420 to 504 48 to 57
Size
Pound-
Feet
Newton
metres
7/16 inch 54 to 64 73 to 87
1/2 inch 80 to 96 109 to 130
9/16 inch 110 to 132 149 to 179
5/8 inch 150 to 180 203 to 244
3/4 inch 270 to 324 366 to 439
7/8 inch 400 to 480 542 to 651
1.0 inch 580 to 696 787 to 944
1-1/8 inch 800 to 880 1085 to 1193
1-1/4 inch 1120 to 1240 1519 to 1681
1-3/8 inch 1460 to 1680 1980 to 2278
1-1/2 inch 1940 to 2200 2631 to 2983
Grade 8 Bolts, Nuts, and Studs
Size
Pound-
Inches
Newton
metres
1/4 inch 144 to 180 16 to 20
5/16 inch 288 to 348 33 to 39
3/8 inch 540 to 648 61 to 73
Size
Pound-
Feet
Newton
metres
7/16 inch 70 to 84 95 to 114
1/2 inch 110 to 132 149 to 179
9/16 inch 160 to 192 217 to 260
5/8 inch 220 to 264 298 to 358
3/4 inch 380 to 456 515 to 618
7/8 inch 600 to 720 814 to 976
1.0 inch 900 to 1080 1220 to 1465
1-1/8 inch 1280 to 1440 1736 to 1953
1-1/4 inch 1820 to 2000 2468 to 2712
1-3/8 inch 2380 to 2720 3227 to 3688
1-1/2 inch 3160 to 3560 4285 to 4827
NOTE: Use thick nuts with Grade 8 bolts.
5. 3
TORQUE SPECIFICATIONS - METRIC HARDWARE
Use the following torques when specifications are not given.
These values apply to fasteners with coarse threads as
received from supplier, plated or unplated, or when lubricated
with engine oil. These values do not apply if graphite or
Molydisulfide grease or oil is used.
Grade 12.9 Bolts, Nuts, and Studs
Usually the torque values specified for grade 10.9 fasteners
can be used satisfactorily on grade 12.9 fasteners.
Grade 8.8 Bolts, Nuts, and Studs
Size
Pound-
Inches
Newton
metres
M4 24 to 36 3 to 4
M5 60 to 72 7 to 8
M6 96 to 108 11 to 12
M8 228 to 276 26 to 31
M10 456 to 540 52 to 61
Size
Pound-
Feet
Newton
metres
M12 66 to 79 90 to 107
M14 106 to 127 144 to 172
M16 160 to 200 217 to 271
M20 320 to 380 434 to 515
M24 500 to 600 675 to 815
M30 920 to 1100 1250 to 1500
M36 1600 to 1950 2175 to 2600
8.8
Grade 10.9 Bolts, Nuts, and Studs
Size
Pound-
Inches
Newton
metres
M4 36 to 48 4 to 5
M5 84 to 96 9 to 11
M6 132 to 156 15 to 18
M8 324 to 384 37 to 43
Size
Pound-
Feet
Newton
metres
M10 54 to 64 73 to 87
M12 93 to 112 125 to 150
M14 149 to 179 200 to 245
M16 230 to 280 310 to 380
M20 450 to 540 610 to 730
M24 780 to 940 1050 to 1275
M30 1470 to 1770 2000 to 2400
M36 2580 to 3090 3500 to 4200
10.9
12.9
6. 4
TORQUE SPECIFICATIONS - STEEL HYDRAULIC FITTINGS
Tube OD
Hose ID
Thread
Size
Pound-
Inches
Newton
metres
37 Degree Flare Fitting
1/4 inch
6.4 mm
7/16-20 72 to 144 8 to 16
5/16 inch
7.9 mm
1/2-20 96 to 192 11 to 22
3/8 inch
9.5 mm
9/16-18 120 to 300 14 to 34
1/2 inch
12.7 mm
3/4-16 180 to 504 20 to 57
5/8 inch
15.9 mm
7/8-14 300 to 696 34 to 79
Tube OD
Hose ID
Thread
Size
Pound-
Feet
Newton
metres
3/4 inch
19.0 mm
1-1/16-12 40 to 80 54 to 108
7/8 inch
22.2 mm
1-3/16-12 60 to 100 81 to 135
1.0 inch
25.4 mm
1-5/16-12 75 to 117 102 to 158
1-1/4 inch
31.8 mm
1-5/8-12 125 to 165 169 to 223
1-1/2 inch
38.1 mm
1-7/8-12 210 to 250 285 to 338
Split Flange Mounting Bolts
Size
Pound-
Inches
Newton
metres
5/16-18 180 to 240 20 to 27
3/8-16 240 to 300 27 to 34
7/16-14 420 to 540 47 to 61
Size
Pound-
Feet
Newton
metres
1/2-13 55 to 65 74 to 88
5/8-11 140 to 150 190 to 203
Tube OD
Hose ID
Thread
Size
Pound-
Inches
Newton
metres
Straight Threads with O-ring
1/4 inch
6.4 mm
7/16-20 144 to 228 16 to 26
5/16 inch
7.9 mm
1/2-20 192 to 300 22 to 34
3/8 inch
9.5 mm
9/16-18 300 to 480 34 to 54
1/2 inch
12.7 mm
3/4-16 540 to 804 57 to 91
Tube OD
Hose ID
Thread
Size
Pound-
Feet
Newton
metres
5/8 inch
15.9 mm
7/8-14 58 to 92 79 to 124
3/4 inch
19.0 mm
1-1/16-12 80 to 128 108 to 174
7/8 inch
22.2 mm
1-3/16-12 100 to 160 136 to 216
1.0 inch
25.4 mm
1-5/16-12 117 to 187 159 to 253
1-1/4 inch
31.8 mm
1-5/8-12 165 to 264 224 to 357
1-1/2 inch
38.1 mm
1-7/8-12 250 to 400 339 to 542
7. 5
TORQUE SPECIFICATIONS - STEEL HYDRAULIC FITTINGS
Nom.
SAE
Dash
Size Tube OD
Thread
Size
Pound-
Inches
Newton
metres
Thread
Size
Pound-
Inches
Newton
metres
O-ring Face Seal End
O-ring Boss End
Fitting or Lock Nut
-4 1/4 inch
6.4 mm
9/16-18 120 to 144 14 to 16 7/16-20 204 to 240 23 to 27
-6 3/8 inch
9.5 mm
11/16-16 216 to 240 24 to 27 9/16-18 300 to 360 34 to 41
-8 1/2 inch
12.7 mm
13/16-16 384 to 480 43 to 54 3/4-16 540 to 600 61 to 68
Thread
Size
Pound-
Feet
Newton
metres
-10 5/8 inch
15.9 mm
1-14 552 to 672 62 to 76 7/8-14 60 to 65 81 to 88
Nom.
SAE
Dash
Size Tube OD
Thread
Size
Pound-
Feet
Newton
metres
1-1/16-12 85 to 90 115 to 122
1-3/16-12 95 to 100 129 to 136
-12 3/4 inch
19.0 mm
1-3/16-12 65 to 80 90 to 110 1-5/16-12 115 to 125 156 to 169
-14 7/8 inch
22.2 mm
1-3/16-12 65 to 80 90 to 110 1-5/8-12 150 to 160 203 to 217
-16 1.0 inch
25.4 mm
1-7/16-12 92 to 105 125 to 140 1-7/8-12 190 to 200 258 to 271
-20 1-1/4 inch
31.8 mm
1-11/16-12 125 to 140 170 to 190
-24 1-1/2 inch
38.1 mm
2-12 150 to 180 200 to 254
9. 2
7-90470NH Issued 8-2001
Template Name: SM_2_col
Template Date: 1997_01_13
Alt= to hide template information
Alt+ to display template information
SAFETY
WARNING: THIS SAFETY ALERT SYMBOL INDICATES IMPORTANT
SAFETY MESSAGES IN THIS MANUAL. WHEN YOU SEE THIS
SYMBOL, CAREFULLY READ THE MESSAGE THAT FOLLOWS AND
BE ALERT TO THE POSSIBILITY OF PERSONAL INJURY OR
DEATH.** M171B
!
To prevent injury always follow the Warning, Caution
and Danger notes in this section and throughout the
manual.
Put the “Do Not Operate” tag shown below on the key
for the key switch when keys are removed for
servicing or repairing the machine. Tags are available
from your service parts supplier.
Before servicing a machine, park the machine on
hard level ground. Turn off the engine, apply the
parking brake and remove the key from the key
switch. Put blocks in front of and behind either the
front or rear wheels.
MS99B001
WARNING: Read the operators manual to
familiarize yourself with the correct control
functions. M489
WARNING: Operate the machine and
equipment controls from the seat position
only. Any other method could result in
serious injury. M490
WARNING: This is one man machine, no
riders allowed. M491
!
!
!
WARNING: Before starting engine study
Operators Manual safety messages. Read
all safety signs on machine. Clear the area of
other persons. Learn and practice safe use
of controls before operating. It is your
responsibility to understand and follow
manufacturers instructions on machine
operation, service, and to observe pertinent
laws and regulations. Operator and Service
Manuals may be obtained from your
equipment dealer. M103A
WARNING: If you wear clothing that is too
loose or do not use the correct safety
equipment for your job, you can be injured.
Always wear clothing that will not catch on
objects. Extra safety equipment that can be
required includes hard hat, safety shoes, ear
protection, eye or face protection, heavy
gloves and reflector clothing. M492
WARNING: When working in the area of the
fan belt with the engine running, avoid loose
clothing if possible, and use extreme caution.
M493
WARNING: When doing checks and tests
on the equipment hydraulics, follow the
procedures as they are written. DO NOT
change the procedure. M494
WARNING: When putting the hydraulic
cylinders on this machine through the
necessary cycles to check operation or to
remove air from a circuit, make sure all
people are out of the way. M495
WARNING: Always wear heat protective
gloves to prevent burning your hands when
handling heated parts. SM121A
!
!
!
!
!
!
10. 3
7-90470NH Issued 8-2001
Template Name: SM_2_col
Template Date: 1997_01_13
Alt= to hide template information
Alt+ to display template information
ROLL OVER PROTECTIVE
STRUCTURE (ROPS)
ROPS, the operators seat, the seat belts and all
mounting, accessories and wiring inside the
operators protective system must be carefully
checked after a tractor accident and all parts with
damage must be replaced immediately. DO NOT
TRY TO MAKE REPAIRS OR WELD THE ROPS.
Safety Rules:
1. Do not make modifications to the ROPS.
Example, welding an accessory to the ROPS or
drilling a hole in the ROPS.
2. Special fasteners are used to install the operator
protective parts. Replacement parts must be the
same as given in the Parts Catalog.
WARNING: Lower all attachments to the
ground or use stands to safely support the
attachments before you do any maintenance
or service. M496
WARNING: Hydraulic oil or diesel fuel
leaking under pressure can penetrate the
skin and cause infection or other injury.
To Prevent Personal Injury:
Relieve all pressure, before disconnecting
fluid lines. Before applying pressure, make
sure all connections are tight and
components are in good condition.
Never use your hand to check for suspected
leaks under pressure.
Use a piece of cardboard or wood for this
purpose. If injured by leaking fluid, see your
doctor immediately. SM171A
WARNING: When removing hardened pins
such as a pivot pin, or a hardened shaft, use
a soft head (brass or bronze) hammer or use
a driver made from brass or bronze and a
steel head hammer. M497
WARNING: When using a hammer to
remove and install pivot pins or separate
parts using compressed air or using a
grinder, wear eye protection that completely
encloses the eyes (approved goggles or
other approved eye protectors). M498
WARNING: Use suitable floor (service)
jacks or chain hoist to raise wheels or tracks
off the floor. Always block machine in place
with suitable safety stands M499
WARNING: When servicing or repairing the
machine. Keep the shop floor and operators
compartment and steps free of oil, water,
grease, tools, etc. Use an oil absorbing
material and or shop cloths as required. Use
safe practices at all times. M500
WARNING: Some components of this
machine are very heavy. Use suitable lifting
equipment or additional help as instructed in
the Service Manual. M501
!
!
!
!
!
!
!
WARNING: Engine exhaust fumes can
cause death. If it is necessary to start the
engine in a closed place, remove the exhaust
fumes from the area with an exhaust pipe
extension. Open the door and get outside air
into the area. M502
WARNING: When the battery electrolyte is
frozen, the battery can explode if (1), you try
to charge the battery, or (2), you try to jump
start and run the engine. To prevent the
battery electrolyte from freezing, try to keep
the battery at full charge. If you do not follow
these instructions, you or others in the area
can be injured. M503
WARNING: Batteries contain acid and
explosive gas. Explosions can result from
sparks, flames or wrong cable connections.
To connect the jumper cables correctly to the
battery of this machine see the Operators
Manual. Failure to follow these instructions
can cause serious injury or death. M504
!
!
!
13. 3
Alt= to hide template information
Alt+ to display template information
Template Name: OML_1_col 6-6230
Template Date: 1994_04_22
DIESEL ENGINE
Engine Lubrication System
Oil Pressure at Idle Speed (Minimum)
TJ 275-325 ................................................................................................................................ 10 PSI (69 kPa)
TJ 375-450.............................................................................................................................. 20 PSI (138 kPa)
Oil Pressure at High Idle
TJ 275-325 ........................................................................................................40 to 50 PSI (276 TO 344 kPa)
TJ 375-450.................................................................................................................. 35-40 PSI (240-276 kPa)
Type of System ............................................................................................................................ Pressure and Spray
Fuel System
Fuel Injection Pump....................................................................................................................................CUMMINS
Fuel Injectors..............................................................................................................................................CUMMINS
Tank Capacity
TJ 275-325 ................................................................................................................... 200 Gallons (758 Liters)
TJ 375-450................................................................................................................. 300 Gallons (1136 Liters)
Air Intake System
Type........................................................................................................Dry Type, Two Stage Aspirator System with
Service Indicator in Instrument Cluster
Tractor Model TJ 275 TJ 325 TJ 375-450
Engine Manufacturer CDC CDC Cummins
Engine Model 6TAA-8304 6TAA-9004 QSX 15
Type In-Line, Six Cylinder, Four Stroke Cycle
Aspiration Turbo Charged, Air To Air After Cooled
Firing Order 1-5-3-6-2-4
Bore - inch (mm) 4.49 (114) 4.49 (114) 5.4 (137)
Stroke - inch (mm) 5.31 (135) 5.69 (144.5) 6.7 (168)
Displacement - inch3
(L) 506 (8.3) 543 (9) 912 (15.0)
Compression Ratio 17.1:1 16.6:1 16.5:1
Cylinder Sleeves Replaceable Wet Type
High Engine Idle RPM 2100-2145 RPM 2100-2145 RPM 2125-2165 RPM
Rated Engine Speed 2000 RPM 2000 RPM 2000 RPM
Engine Idle Speed 850 RPM 850 RPM 875 RPM
Engine Power Rating-HP (kw)
at 2000 RPM
278 (205) 325 (242) TJ375 375 (279)
TJ450 450 (335)
Peak Torque - lb-ft (Nm)
at 1400 RPM
1022 (1386) 1150 (1559) TJ375 1380 (1871)
TJ450 1669 (2263)
Torque Rise - % 40 35 TJ375 40
TJ450 41
GENERAL SPECIFICATIONS
14. 4
Alt= to hide template information
Alt+ to display template information
Template Name: OML_1_col 6-6230
Template Date: 1994_04_22
Transmission - Power Shift
Type..........................................................................16 Speed Full Power Shift, 16 Forward and 2 Reverse Speeds
Shift Control....................................................................................Electronically Controlled, Hydraulically Operated
Transmission - Manual Shift
Type......................................................................................................... 24 Speeds Forward, 6 Speeds in Reverse,
Constant Mesh, Synchronized Shift
Gear Shift Control................................................................................................................................Lever Actuated
Rangeshift Control...............................................................................................................................Lever Actuated
HI-LO Power Shift Control ........................................................... Actuated Electrically by Switch on Throttle Control
Brakes
Service Brake ....................................................................................Hydraulic Multiple Disc Wet Brake Integral with
Front and Rear Differentials
Park Brake................................................................................................Electrically Controlled. Spring Applied and
Pressure Released. Integral with
Front/Rear Differentials
Axle Differential And Final Drives
Type....................................................................................................Bar Type with Integral Wet Brake, Spiral Bevel
Ring/Pinion Gears. Pressure Lubed and Oil Cooled
Final Drive
TJ 275-325 ........................................................................................................................... 3-Pinion Planetary
TJ 375 .................................................................................................................................. 4-Pinion Planetary
TJ 375HD-TJ450 ..............................................................................................................Compound Planetary
Total Axle Reduction (Ratio)
TJ 275-325................................................................................................................................................25.7:1
TJ 375 ...................................................................................................................................................25.396:1
TJ 375HD-TJ 450.................................................................................................................................25.193:1
Axle Bar Diameter
TJ 275-325..........................................................................................................................4.0 Inch (101.6 mm)
TJ 375-450 ............................................................................................................................4.5 inch (115 mm)
Bar Length...................................................................................................................................120 Inch (3048 mm)
Power Takeoff (If Equipped)
PTO Type............................................................................................................................ Live Independent System
Integral with Transmission
Type Clutch..................................................................................................................Electro/Hydraulically Actuated
Rotation ......................................................................................................................Clockwise from Rear of Tractor
1000 RPM....................................................................................................................20 Splines 1.75 Inch Diameter
Engine Speed for 1000 RPM......................................................................................................................2000 RPM
15. 5
Alt= to hide template information
Alt+ to display template information
Template Name: OML_1_col 6-6230
Template Date: 1994_04_22
Hydraulic System
Type.............................................................................................................................Closed Center, Load Sensing,
Pressure Compensating System
Remote Valve
Standard................................................................................................................Mechanically Operated, Closed
Center Stack Type with Line
Locks on Lift Ports
Optional.........................................................................................................Electro/Hydraulic Controlled, Closed
Center Stack Type with In-Cab Variable
Flow Control for Each Section Also Line
Locks on all Lift Ports
Standard System Pump Capacity
(at 2000 PSI - 2000 RPM)................................................................................................... 40 GPM (151.4 L/min)
High Output Pump Capacity (If Equipped)
(at 2000 PSI - 2000 RPM)...................................................................................................... 55 GPM (208 L/min)
Steering .................................................................................. Articulated, Full Priority, Two Double Acting Cylinders
Maximum Steering Pressure ........................................................................................................ 2700 PSI (186 bar)
Couplings................................................................................................................................ISO Standard Couplers
Maximum System Pressure.......................................................................................................... 2900 PSI (200 bar)
MegaFlow Hydraulics (If Equipped)
Type System ................................................................................................................................... PFC Piston Pump
Pump Capacity (at 2000 PSI - 2000 RPM)................................................................................. 35 GPM (132 L/Min)
Remote Valve ..........................................................................................................Two-Electro/Hydraulic Controlled
Couplers ..................................................................................................................... ISO Standard 7241-1 Series A
Hitch System (If Equipped)
Type Control ...............................................................................................................................Manual or Electronic
Type Valve .........................................................................................................Three Position - Lift, Hold and Lower
Type Draft Arms..............................................................................Rigid, Swing Type with Manual Float Adjustment
Type Hitch..........................................................................................................................Three Point Category IV-N
Hitch Coupler (adjustable) ............................................................................................................Category III or IV-N
Lift Capacity (OECD Static)
24 Inch (610 mm) Back
TJ 275-325 .................................................................................................. 16 000 lb (3080 Kg)
TJ 375-450 .................................................................................................. 19 500 lb (8833 Kg)
Drawbar
Type...............................................................................................................Yoke Type, Side Swing and Extendable
Pin Diameter ................................................................................................................................2.0 Inch (51 mm)
Pin Length ..................................................................................................................................8.7 Inch (220 mm)
Static Load Rating (vertical)
Standard
TJ 275-325 ............................................................................................................................. 4500 lb (2039 Kg)
TJ 375-450 ............................................................................................................................. 5300 lb (2400 Kg)
Optional HD............................................................................................................................. 11 000 lb (4983 Kg)
16. 6
Alt= to hide template information
Alt+ to display template information
Template Name: OML_1_col 6-6230
Template Date: 1994_04_22
TRACTOR WEIGHTS
Approximate Base Shipping Weights
TJ 275-TJ 325 with 20.8 R-42 Duals...................................................................................... 29 760 lbs (13 499 Kg)
TJ 375 with 20.8 R42 Duals ................................................................................................... 35 075 lbs (15 889 Kg)
TJ 375HD with 620/70 R42 Duals .......................................................................................... 38 340 lbs (17 368 Kg)
TJ 450 with 20.8 R-42 Duals .................................................................................................. 36 700 lbs (16 625 Kg)
NOTE: Estimated base shipping weights listed are with 20 gal. (76 L) of fuel, less operator, no TPH, PTO or other
operational equipment.
Approximate Component Weights
Three Point Hitch...............................................................................................................................2097 lb (950 kg)
Hitch Coupler.......................................................................................................................................458 lb (207 kg)
PTO System ........................................................................................................................................700 lb (318 kg)
NOTE: Calculate fuel weight at 7.2 lb (3.3 kg) per gallon.
Maximum Tractor Operating Weight
The maximum recommended tractor operating weight includes the operator, tractor, tractor equipment and ballast.
The maximum weight is with a 60% front and 40% rear static weight distribution.
Maximum Tractor Operating Weight
TJ 275 ................................................................................................................................ 33 000 lbs (14 968 Kg)
TJ 325 ................................................................................................................................ 39 000 lbs (17 690 Kg)
TJ 375 ................................................................................................................................ 45 000 lbs (20 385 Kg)
TJ 450................................................................................................................................ 52 800 lbs (23 918 Kg)
18. 2
Template Name: SM_2_col
Template Date: 2000_01_13
SPECIAL TORQUE VALUES
Metric Values U.S. Values
Front Engine Mount Bolts ..................................................................................286 to 320 Nm 208 to 236 lb ft
Rear Engine Mount Bolts...................................................................................252 to 278 Nm 185 to 205 lb ft
Driveshaft to Drive Coupler Mounting Bolts.......................................................163 to 176 Nm 120-to 130 lb ft
Exhaust Pipe Channel Clamp...........................................................................................8 Nm 75 lb inch
Exhaust Flex Tube Band Clamps...........................................................................29 to 33 Nm 21 to 24 lb ft
Hood Support Bracket Mounting Bolts ..................................................................68 to 77 Nm 50 to 57 lb ft
Aspirator Tube P-Clamp Mounting Bolts..............................................................94 to 106 Nm 69 to 78 lb ft
Aspirator Tube Clamp .....................................................................................................40 Nm 29 lb ft
Turbo Air Tube Clamp ..............................................................................................9 to 11 Nm 77 to 93 lb inch
Step to Fram Mounting Bolts .................................................................................39 to 44 Nm 28 to 32 lb ft
SPECIAL TOOLS
MS99H280
OEM 4130 LOAD ROTOR
19. 3
Template Name: SM_2_col
Template Date: 2000_01_13
STEP 1
MK01G302
1. Park the tractor on a solid, level surface.
2. Place the shift lever in PARK (Powershift) or
place the shift levers in neutral and the park
brake switch in the ON position.
3. Shut off the engine and remove the key from the
switch.
STEP 2
Discharge the A/C system. See Section 50, Chapter
2 of the Service Manual for discharge procedures.
STEP 3
Remove the hood. See Section 90, Chapter 3 of the
Service Manual for hood removal procedures.
STEP 4
Remove the radiator. See Section 10, Chapter 4 for
radiator removal procedures.
STEP 5
MD01J013
Open the battery access door and disconnect the
negative battery cables from both batteries.
STEP 6
MD01M001
Loosen the clamps and remove the aspirator tube
from the check valve and air cleaner.
STEP 7
MD01M002
Remove the wire harness connector from the
restriction switch.
STEP 8
MD01M005
Remove the RH wire harness clamp from the hood
support.
20. 4
Template Name: SM_2_col
Template Date: 2000_01_13
STEP 9
MD01M006
Remove the two LH wire harness clamps.
STEP 10
MD01K192
Loosen the two carriage bolt (1) nuts and remove the
two rear mounting bolts (2), washers and nuts.
Remove the frame step.
STEP 11
MD01M014
Remove the A/C and fuel hoses from the rear leg of
the hood support.
STEP 12
MD01M013
Remove the A/C hoses from the front left side leg of
the hood support.
STEP 13
MD01M010
Install lifting straps or chain on the hood support/air
cleaner assembly. Attach the straps to an overhead
hoist. Raise the hoist to support the assembly.
STEP 14
MD01M007
Remove the mounting bolts, washers and lock nuts
from the right side hood support leg.
21
21. 5
Template Name: SM_2_col
Template Date: 2000_01_13
STEP 15
MD01M008
Remove the bolts, washers and lock nuts from the
front left side hood support leg.
STEP 16
MD01M009
Remove the bolts, washers and lock nuts from the
rear hood support leg. Lift the hood support from the
tractor.
STEP 17
MD01M015
Remove the A/C high pressure switch wire connector
from the engine harness.
STEP 18
MD01M017
Remove the suction and discharge hoses from the
compressor. Install caps and plugs on the ports and
hose ends to prevent contamination from entering
the system.
STEP 19
MD01M018
Remove the A/C hose clamps (1) from the top of the
fuel filter. Remove the ether start tube (2) from the
discharge hose clamp.
STEP 20
MD01M021
Remove the cable ties from the discharge hose.
secure the ether start tube and wires to the engine.
1
2
22. 6
Template Name: SM_2_col
Template Date: 2000_01_13
STEP 21
MD01M019
Remove the two mounting bolts. Move the A/C hoses
and bracket to the left side frame.
STEP 22
MD01M023
Shut off the fuel.
STEP 23
MD01M024
Install hose clamps on both fuel hoses. Loosen the
hose clamps and remove the fuel hoses from the
engine.
STEP 24
MD01M025
Remove the driveshaft mounting bolts and slide the
driveshaft rearward away from the drive coupler.
STEP 25
MD01M026
Remove the lower clamp mounting bolt (1) and
loosen the hose clamp (2). Remove the lower
radiator hose from the engine.
STEP 26
MD01M027
Remove the ground strap and wire harness bracket
from the engine.
2
1
23. 7
Template Name: SM_2_col
Template Date: 2000_01_13
STEP 27
MD01M028
Remove the wires from the alternator.
STEP 28
MD01M029
Remove the engine wire harness connector from the
front frame wire harness.
STEP 29
MD01M030
Remove the cables from the starter.
STEP 30
MD01M032
Use an O-ring pick or dental hook to open the
terminal cover.
STEP 31
MD01M031
Remove the screws to remove the wire from the
starter.
STEP 32
MK99J177
Loosen the hose clamps and remove the heater
hoses from the engine.
24. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
25. 8
Template Name: SM_2_col
Template Date: 2000_01_13
STEP 33
MD01M033
Loosen the aspirator tube clamp.
STEP 34
MD01M034
Remove the clamp mounting bolt and remove the
aspirator tube from the tractor.
STEP 35
MD01M035
Loosen the exhaust flex tube clamp.
STEP 36
MD01M036
Remove the channel clamp (1) from the turbo
exhaust port. Remove the exhaust pipe (2) and flex
tube.
STEP 37
MD01M037
Install the OEM 4130 Load Rotor on the two engine
lifting brackets. Attach the load rotor to an overhead
hoist.
IMPORTANT: The engine lifting brackets are for
vertical lifting only. Any lifting device that is not
vertically in-line with the lifting brackets can damage
the engine rocker arm cover or cause bracket failure.
1
2
26. 9
Template Name: SM_2_col
Template Date: 2000_01_13
STEP 38
MK99J013
Remove the lock nut, bolt and washers from the front
engine mount.
NOTE: Fan removed for photo purposes.
STEP 39
MK99J030
Remove the lock nut, large flat washer, bolt and small
flat washer from the left side (shown) and right side
rear engine mounts.
STEP 40
MK99J040
To remove the engine, lift the engine until the oil pan
will clear the front frame engine mount crossmember.
Move the engine forward out of the tractor.
NOTE: Fan is removed for photo purposes.
27. 10
Template Name: SM_2_col
Template Date: 2000_01_13
ENGINE INSTALLATION
STEP 41
MK99J036
Install the OEM 4130 Load Rotor on the two engine
lifting brackets. attach the load rotor to an overhead
hoist.
IMPORTANT: The engine lifting brackets are for
vertical lifting only. Any lifting device that is not
vertically in-line with the lifting brackets can damage
the engine rocker arm cover or cause bracket failure.
STEP 42
MK99J037
If removed after the engine was removed, install the
three large flat washers on the front and rear (shown)
rubber isolators.
STEP 43
MK99J039
Install the bolts and small flat washers in the rear
engine mounts. Lift the engine until the oil pan will
clear the front frame and engine mount
crossmember. Move the engine rearward into the
tractor until it is positioned above the engine
mounting brackets.
STEP 44
MK99J038
Use the rear mounting bolts as guides and slowly
lower the engine on the front frame engine mounting
brackets.