The document is a service manual that provides technical information for servicing a TC5.30 combine. It contains sections on the engine, clutch, transmission, front and rear axle systems, brakes, hydraulic systems, steering, wheels, cab climate control, electrical systems, attachments, product feeding, threshing, separation, cleaning, and crop storage/unloading. Each section contains chapters that provide technical data, functional data, diagnostic data, and service procedures for the components in that section of the combine.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
Core technology of Hyundai Motor Group's EV platform 'E-GMP'Hyundai Motor Group
What’s the force behind Hyundai Motor Group's EV performance and quality?
Maximized driving performance and quick charging time through high-density battery pack and fast charging technology and applicable to various vehicle types!
Discover more about Hyundai Motor Group’s EV platform ‘E-GMP’!
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
8. INTRODUCTION
Foreword
TC5.30 Combine Without Cab APAC
TC5.30 Combine with CAB APAC
Important information
All repair and maintenance works listed in this manual must be carried out only by staff belonging to NEW HOLLAND
Service network, strictly complying with the instructions given and using, whenever required, the special tools.
Anyone who carries out the above operations without complying with the prescriptions shall be responsible for the
subsequent damages.
The manufacturer and all the organizations of its distribution chain, including - without limitation - national, regional or
local dealers, reject any responsibility for damages due to the anomalous behavior of parts and/or components not
approved by the manufacturer himself, including those used for the servicing or repair of the product manufactured
or marketed by the manufacturer. In any case, no warranty is given or attributed on the product manufactured or
marketed by the manufacturer in case of damages due to an anomalous behavior of parts and/or components not
approved by the manufacturer.
No reproduction, though partial of text and illustrations is allowed.
48068867 07/03/2017
3
9. INTRODUCTION
Foreword
TC5.30 Combine Without Cab APAC
TC5.30 Combine with CAB APAC
Technical information
This manual has been produced by a new technical information system. This new system is designed to deliver
technical information electronically through CD-ROM and in paper manuals. A coding system called ICE has been
developed to link the technical information to other product support functions, e.g. warranty.
Technical information is written to support the maintenance and servicing of the functions or systems of the customer's
machine. When a customer has a concern about a machine, it is usually because a function or system in the machine
is not working at all, not working efficiently, or not responding correctly to commands. When you refer to the technical
information in this manual to resolve the customer's concern, you will find all the information classified using the
new ICE coding, based on that machine's functions or systems. Once you have located the technical information for
that function or system, you will find all the mechanical, electrical or hydraulic devices, components, assemblies and
sub-assemblies for that function or system. You will also find all the types of information that have been written for
that function or system, the technical data (specifications), the functional data (how it works), the diagnostic data (fault
codes and troubleshooting) and the service data (remove, install adjust, etc.).
By integrating this new ICE coding into the technical information, you will be able to search for and retrieve the right
piece of technical information needed to resolve the customer's concern about the machine. This is made possible
by attaching 3 categories to each piece of technical information during the authoring process.
The first category is the location, the second category is the information type and the third category is the product:
• Location - is the component or function on the machine that the technical information is going to describe, e.g. Fuel
tank.
• Information type - is the technical information that has been written for a particular component or function on the
machine, e.g. Capacity would be a type of technical data describing the amount of fuel held by the fuel tank.
• Product - is the model for which the technical information is written.
Every piece of technical information will have those 3 categories attached to it. You will be able to use any combination
of those categories to find the right piece of technical information you need to resolve the customer's concern about
the machine.
This information could be:
• The description of how to remove the cylinder head
• A table of specifications for a hydraulic pump
• A fault code
• A troubleshooting table
• A special tool
48068867 07/03/2017
4
10. INTRODUCTION
How to use this manual
This manual is divided into sections. Each section is then divided into chapters. Contents pages are included at the
beginning of the manual, then inside every section and inside every Chapter. There is an alphabetic index at the end
of every chapter. Page number references are included for every piece of technical information listed in the chapter
contents or chapter index.
Each chapter is divided into four information types:
• Technical data (specifications) for all the mechanical, electrical or hydraulic devices, components and, assemblies.
• Functional data (how it works) for all the mechanical, electrical or hydraulic devices, components and assemblies.
• Diagnostic data (fault codes, electrical and hydraulic troubleshooting) for all the mechanical, electrical or hydraulic
devices, components and assemblies.
• Service data (remove disassembly, assemble, install) for all the mechanical, electrical or hydraulic devices, com-
ponents and assemblies.
Sections
Sections are grouped according to the machine's main functions or systems. Each section is identified by a letter A,
B, C etc. The number of sections in the manual will depend on the type and function of the machine for which it is
written. Each section has a contents page listed in alphabetic/numeric order. This table illustrates which Sections
could be included in a manual for a particular product.
Section
A - Distribution systems
B - Power production
C - Power train
D - Travelling
E - Body and structure
F - Frame positioning
G - Tool positioning
H - Working arm
J - Tools and couplers
K - Crop processing
L - Field processing
Product
Tractors X X X X X X X X
Vehicles with working arms: backhoes,
excavator, front end loaders with
shoes......
X X X X X X X X X
Harvesters, forage harvesters, balers.... X X X X X X X X X X
Seeder, planter, floater, pulverising
equipment....
X X X X X X X X X
Mounted equipment and tools..... X X X X
48068867 07/03/2017
5
12. Engine - Engine and crankcase
Engine - Remove
TC5.30 Combine Without Cab APAC
TC5.30 Combine with CAB APAC
Prior operation:
Disconnect the battery connections. See the “ Battery - Disconnect (55.302)”.
Prior operation:
Remove radiator. See the “ Radiator - Remove (10.400)”.
Prior operation:
Remove hydraulic oil reservoir. See the “ Oil reservoir - Remove (35.300)”.
Prior operation:
Remove hydrostatic pump. See the “ Pump - Remove (29.218)”.
Prior operation:
Remove air cleaner. See the “ Air cleaner - Remove (10.202)”.
Prior operation:
Remove fly wheel belt. See the “ Engine flywheel - Remove (10.103)”.
1. Loosen and remove the bolt (1) along with nut and
washer from the flywheel side profile support bracket
(2).
PUIL16CH01840AB 1
2. Loosen and remove the four bolts along with nuts and
washers (1) from the profile (2).
PUIL16CH01841AB 2
3. Loosen and remove the two bolts along with nuts and
washers (1) from the engine front side support rein-
forcement (2).
PUIL16CH01844AB 3
48068867 07/03/2017
10.1 [10.001] / 3
13. Engine - Engine and crankcase
4. Loosen and remove the five bolts along with nuts and
washers (1) from the engine front side support rein-
forcement (2).
5. Place the suitable holding device to hold the engine
and lift it from the profile and place it on leveled surface
area.
PUIL16CH01843AB 4
48068867 07/03/2017
10.1 [10.001] / 4
14. Engine - Engine and crankcase
Engine - Install
TC5.30 Combine Without Cab APAC
TC5.30 Combine with CAB APAC
1. Place the suitable holding device to hold the engine and
lift it from the ground and place it in the combine.
2. Tighten the five bolts (1) along with nuts and washers
on the engine front side support reinforcement (2).
PUIL16CH01843AB 1
3. Tighten the two bolts (1) along with nuts and washers
on the engine front side support reinforcement (2).
PUIL16CH01844AB 2
4. Tighten the four bolts (1) along with nuts and washers
on the profile and support bracket (2).
PUIL16CH01841AB 3
5. Tighten the bolt (1) along with nut and washer on the
flywheel side support bracket (2).
PUIL16CH01846AB 4
48068867 07/03/2017
10.1 [10.001] / 5
15. Engine - Engine and crankcase
Next operation:
Install the fly wheel belt. See the “ Engine flywheel - Install (10.103)”.
Next operation:
Install the air cleaner. See the “ Air cleaner - Remove (10.202)”.
Next operation:
Install the hydrostatic pump. See the “ Pump - Install (29.218)”.
Next operation:
Install the hydraulic oil reservoir. See the “ Oil reservoir - Install (35.300)”.
Next operation:
Install the radiator. See the “ Radiator - Install (10.400)”.
Next operation:
Connect the battery. See the “ Battery - Connect (55.302)”.
48068867 07/03/2017
10.1 [10.001] / 6
16. Engine - Crankshaft and flywheel
Engine flywheel - Remove - Belt
TC5.30 Combine Without Cab APAC
TC5.30 Combine with CAB APAC
1. Remove the cotter pin (1) from the rod (2) to disconnect
the main drive lever (3).
2. Disconnect the spring (4) from the main drive lever (3)
and from the grain tank bottom bracket (5).
PUIL16CH01847AB 1
3. Loosen and remove the bolt (1) along with nut and
washer from the support (2) and from the conveyor (3).
PUIL15CH01102AB 2
4. Loosen and remove all the bolts (1) along with nuts and
washers from the both beugel (2) and remove both the
beugels from the guideway.
PUIL16CH01848AB 3
5. Loosen and remove the two bolts (1) along with nuts
and washers from the support (2) to remove the guide-
way (3).
PUIL16CH01849AB 4
48068867 07/03/2017
10.2 [10.103] / 3
17. Engine - Crankshaft and flywheel
6. Remove the belt (1) from the pulley (2).
PUIL16CH01908AB 5
7. Loosen and remove the two bolts (1) along with wash-
ers from the support (2).
8. Remove the support (2) from the flywheel housing (3).
PUIL16CH01909AB 6
9. Loosen the traction drive control bolt (1) to reduce the
belt tension and remove the belt (2) from the pulley (3).
PUIL16CH01914AB 7
10. Loosen and remove the two nuts (1) along with wash-
ers from the power take-off shaft (2).
11. Remove the pulley (3) from the power take-off shaft
(2).
PUIL16CH01911AB 8
48068867 07/03/2017
10.2 [10.103] / 4
18. Engine - Crankshaft and flywheel
12. Remove the slat key (1) from the power take-off shaft
(2).
PUIL15CH01113AB 9
13. Loosen and remove the twelve bolts (1) along with
washers from the housing (2).
14. Remove the housing (2) from the engine assembly (3).
15. Place the housing (1) at a suitable place.
PUIL15CH01108AB 10
16. Remove the bearing (1) from the housing (2) using the
universal bearing puller.
17. Remove the five stopsel (3) from the housing (2).
PUIL15CH01111AB 11
18. Loosen and remove the eight screws (1) along with
washers from the engine assembly (2).
19. Remove power take-off shaft sub-assembly (3) from
the engine assembly (2).
PUIL15CH01109AB 12
48068867 07/03/2017
10.2 [10.103] / 5
19. Engine - Crankshaft and flywheel
20. Loosen and remove the three nuts (1) and bolts from
the coupling (2).
21. Remove the power take-off shaft (3) from the coupling
(2).
22. Loosen and remove the three nuts (4) along with bolts
from the bottom disc assembly (5).
PUIL16CH01973AB 13
48068867 07/03/2017
10.2 [10.103] / 6
20. Engine - Crankshaft and flywheel
Engine flywheel - Install - Belt
TC5.30 Combine Without Cab APAC
TC5.30 Combine with CAB APAC
1. Tighten the three nuts (1) along with bolts on the bottom
disc assembly (5).
• Torque the bolts (1) with 210+/-10 N·m.
2. Install the power take-off shaft (3) on the coupling (2).
3. Tighten the three nuts (4) and bolts on the coupling (2).
PUIL16CH01973AB 1
4. Install the power take-off sub-assembly (1) on the en-
gine assembly (2).
5. Tighten the eight screws (3) along with washers on the
engine assembly (2).
PUIL15CH01109AB 2
6. Install the five stopsel (1) on the housing (2).
7. Install the bearing (3) on the housing (2) using tool
380200662 bearing press stake tool.
PUIL15CH01111AB 3
8. Place the housing assembly (1) on the engine assem-
bly.
9. Tighten the twelve bolts (2) along with washers on the
housing (1).
PUIL15CH01108AB 4
48068867 07/03/2017
10.2 [10.103] / 7
21. Engine - Crankshaft and flywheel
10. Install the slat key (1) on the power take-off shaft (2).
NOTE: The slat key edge should have more chamfer to
touch the power take-off shaft.
PUIL15CH01113AB 5
11. Install the pulley (1) on the power take-off shaft (2).
NOTE: Use suitable press machine to install the pulley (1)
on the power take-off shaft (2).
PUIL16CH02014AB 6
12. Tighten the nut (3) along with washer on the power
take-off shaft (2).
• Tighten the nut (3) to the torque 630.0 – 650.0 N·m
(5576.0 – 5753.0 lb in).
PUIL16CH02015AB 7
13. Tighten the nut (4) on the power take-off shaft (2).
• Tighten the nut (4) to the torque 480.0 – 500.0 N·m
(4248.4 – 4425.4 lb in).
PUIL16CH02016AB 8
48068867 07/03/2017
10.2 [10.103] / 8
22. Engine - Crankshaft and flywheel
14. Tighten the traction drive control bolt (1) to tight the
belt tension (2) on the pulley (3).
PUIL16CH01914AB 9
15. Install the support (2) on the housing assembly (3).
16. Tighten the two bolts (1) along with washers on the
support (2).
PUIL16CH01852AB 10
17. Tighten the two bolts (1) along with nuts and washers
on the support (2) and guide way (3).
18. Install the beugel and tighten all the bolts (4) along
with nuts and washers on the beugel (5).
PUIL16CH01848AB 11
19. Engage the spring (4) on the lever and grain tank bot-
tom bracket (5).
20. Install the cotter pin (1) on the rod (2) to connect the
main drive (3).
PUIL16CH01847AB 12
Next operation:
Adjust the traction variator belts. See the “ Traction variator belts - Adjust (21.600)”.
48068867 07/03/2017
10.2 [10.103] / 9
23. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
24. Engine - Fuel tanks
Fuel tank - Remove
TC5.30 Combine Without Cab APAC
TC5.30 Combine with CAB APAC
WARNING
Pressurized system!
Never attempt to drain fluids or remove filters when the engine is running. Turn off the engine and
relieve all pressure from pressurized systems before servicing the machine.
Failure to comply could result in death or serious injury.
W0905A
WARNING
Heavy objects!
Lift and handle all heavy components using lifting equipment with adequate capacity. Always support
units or parts with suitable slings or hooks. Make sure the work area is clear of all bystanders.
Failure to comply could result in death or serious injury.
W0398A
1. Before removing the fuel tank from the vehicle, make
sure the tank is empty.
2. Lift the side door upward until it is locked in position.
3. Disconnect the fuel tubes (2) from the fuel tank (3).
PUIL15CH00601AB 1
4. Remove the four bolts (1) holding the straps (2) of the
fuel tank (3).
PUIL15CH00602AB 2
48068867 07/03/2017
10.3 [10.216] / 4
25. Engine - Fuel tanks
5. Lift the fuel tank (1) from the vehicle using a suitable
lifting device.
6. Make sure to place the fuel tank in clean surface.
PUIL15CH00603AB 3
7. Loosen and remove the two bolts (1) along with nuts
(2) from the two straps (3).
8. Remove the two straps (3) from the right-hand side
panel (4).
PUIL15CH00604AB 4
9. Loosen and remove the four bolts (1) along with wash-
ers and nuts from the shield (2).
10. Remove the shield (2) from the supports (3).
PUIL15CH00607AB 5
11. Disconnect the electrical harness from the tail lamp
(1).
12. Remove the tail lamp (1) from the support (2).
PUIL15CH00608AB 6
48068867 07/03/2017
10.3 [10.216] / 5
26. Engine - Fuel tanks
13. Loosen and remove the four bolts (1) and four wash-
ers from the two supports (2).
PUIL15CH00609AB 7
14. Loosen and remove the six bolts (1) and six washers
from the filler neck (2).
15. Remove the filler neck (2) from the fuel tank (3).
PUIL16CH01839AB 8
16. Remove the filler neck gasket (1) from the fuel tank.
PUIL16CH01838AB 9
48068867 07/03/2017
10.3 [10.216] / 6
27. Engine - Fuel tanks
Fuel tank - Install
TC5.30 Combine Without Cab APAC
TC5.30 Combine with CAB APAC
1. Install the two supports (2) on the right-hand side panel
and tighten the four bolts (1) along with washers.
PUIL15CH00609AB 1
2. Install the tail lamp (1) on the support (2).
3. Connect the electrical harness to the tail lamp (1).
PUIL15CH00608AB 2
4. Install the shield (2) on the supports (3) and tighten the
four bolts (1) along with nuts and washers.
PUIL15CH00607AB 3
5. Install the two strap (3) on the right-hand side panel (4)
and tighten the two bolts (1) and nuts (2).
PUIL15CH00604AB 4
48068867 07/03/2017
10.3 [10.216] / 7
28. Engine - Fuel tanks
6. Place the filler neck gasket (1) on the fuel tank (2).
PUIL16CH01838AB 5
7. Install the filler neck (2) on the fuel tank (3) and tighten
six bolts (1) along with washers.
PUIL16CH01839AB 6
8. Lift and position the fuel tank on the vehicle using a
suitable device.
PUIL15CH00603AB 7
9. Fasten the two straps (1) on the fuel tank using the bolts
(2).
PUIL15CH00602AB 8
48068867 07/03/2017
10.3 [10.216] / 8