The document provides service information for various tractor models. It includes:
- An introduction section outlining the purpose and organization of the manual.
- Technical sections covering various vehicle systems like the engine, transmission, brakes, hydraulics and electrical systems. Each section includes technical data, descriptions of components, and procedures for service, removal and installation.
- Detailed diagrams, specifications and troubleshooting information to assist with repairs and maintenance.
The manual is intended to help technicians service and repair components according to the manufacturer's instructions. It categorizes information by vehicle system for easy reference to the relevant service procedures and technical details.
PERKINS 4.108M DIESEL ENGINE Service Repair Manual.pdfhmc151121
This workshop manual provides technical information for maintaining Perkins 4.108, 4.107, and 4.99 marine diesel engines. It includes sections on engine components, systems, fault diagnosis, and maintenance procedures. Perkins engines are customized for different applications, so the photos show general engine views rather than a specific specification.
PERKINS 4.107M DIESEL ENGINE Service Repair Manual.pdfhmc151121
This workshop manual provides technical information for maintaining Perkins 4.108, 4.107, and 4.99 marine diesel engines. It includes sections on engine components, systems, fault diagnosis, and maintenance procedures. Perkins engines are customized for different applications, so the manual does not depict any specific engine configuration but rather provides general guidance.
PERKINS 4.99M DIESEL ENGINE Service Repair Manual.pdfhmc151121
This workshop manual provides information for servicing Perkins 4.108, 4.107, and 4.99 marine diesel engines. It includes sections on technical data, operation and maintenance, fault diagnosis, and maintenance of engine components. The first pages provide an overview of the engine identification systems, contents of the manual, and a note regarding the use of genuine Perkins parts. Photographs of the engine components are also included.
Nissan Forklift Internal Combustion 1F4 Series Service Repair Manual.pdfhmc151121
The document provides information on servicing a Nissan forklift model 1F4 series, including:
- It is a service manual that contains maintenance and repair procedures to ensure safety and proper functioning.
- Any revisions will be announced in technical bulletins to supplement the manual.
- The manual consists of sections covering various systems, with the section symbols provided.
- Safety precautions for technicians are outlined, including proper jacking and lifting of the forklift.
Nissan Forklift Electric P02 Series Service Repair Manual.pdfhmc151121
This service manual provides maintenance and repair procedures for the NISSAN FORKLIFT P01 and P02 series. It consists of 14 sections covering general information, maintenance, control systems, batteries/chargers, electrical systems, motor mechanisms, differentials, axles, brakes, steering, hydraulics, loading mechanisms, and bodies/frames. The manual outlines how to use it, defines technical terms, and describes how to read wiring diagrams. Safety notices are included to ensure safe service procedures.
Nissan Forklift Electric P01 Series Service Repair Manual.pdfhmc151121
This service manual provides maintenance and repair procedures for the NISSAN FORKLIFT P01 and P02 series. It consists of 14 sections covering general information, maintenance, control systems, batteries/chargers, electrical systems, motor mechanisms, differentials, axles, brakes, steering, hydraulics, loading mechanisms, and bodies/frames. Any updates will be announced in technical bulletins to supplement the appropriate sections. Revised sections will replace applicable sections as needed. Precautions are outlined to ensure safety during procedures.
Nissan Forklift Electric 1N1 Series Service Repair Manual.pdfhmc151121
This document provides an introduction to a service manual for the NISSAN FORKLIFT 1N1 series. It explains that the manual contains maintenance and repair procedures and should be read thoroughly for safety. The manual consists of 14 sections covering general information, maintenance, control systems, batteries, electrical systems, motors, drive units, tires, brakes, rear axles, steering, hydraulics, loading mechanisms, bodies and frames, and options. Technical bulletins will announce any changes to models or sections. Proper service is important for safety and performance.
Nissan Forklift Electric 1B2 Series Service Repair Manual.pdfhmc151121
The document provides instructions for removing and installing a differential carrier. Key steps include draining the gear oil, removing the front wheels, brake components, and traction motor. The differential carrier is then removed from the axle housing or axle tubes are removed from the carrier. Installation involves cleaning mating surfaces, applying grease, and tightening bolts to the specified torques. Proper lifting techniques and plugging open lines are emphasized for safety.
PERKINS 4.108M DIESEL ENGINE Service Repair Manual.pdfhmc151121
This workshop manual provides technical information for maintaining Perkins 4.108, 4.107, and 4.99 marine diesel engines. It includes sections on engine components, systems, fault diagnosis, and maintenance procedures. Perkins engines are customized for different applications, so the photos show general engine views rather than a specific specification.
PERKINS 4.107M DIESEL ENGINE Service Repair Manual.pdfhmc151121
This workshop manual provides technical information for maintaining Perkins 4.108, 4.107, and 4.99 marine diesel engines. It includes sections on engine components, systems, fault diagnosis, and maintenance procedures. Perkins engines are customized for different applications, so the manual does not depict any specific engine configuration but rather provides general guidance.
PERKINS 4.99M DIESEL ENGINE Service Repair Manual.pdfhmc151121
This workshop manual provides information for servicing Perkins 4.108, 4.107, and 4.99 marine diesel engines. It includes sections on technical data, operation and maintenance, fault diagnosis, and maintenance of engine components. The first pages provide an overview of the engine identification systems, contents of the manual, and a note regarding the use of genuine Perkins parts. Photographs of the engine components are also included.
Nissan Forklift Internal Combustion 1F4 Series Service Repair Manual.pdfhmc151121
The document provides information on servicing a Nissan forklift model 1F4 series, including:
- It is a service manual that contains maintenance and repair procedures to ensure safety and proper functioning.
- Any revisions will be announced in technical bulletins to supplement the manual.
- The manual consists of sections covering various systems, with the section symbols provided.
- Safety precautions for technicians are outlined, including proper jacking and lifting of the forklift.
Nissan Forklift Electric P02 Series Service Repair Manual.pdfhmc151121
This service manual provides maintenance and repair procedures for the NISSAN FORKLIFT P01 and P02 series. It consists of 14 sections covering general information, maintenance, control systems, batteries/chargers, electrical systems, motor mechanisms, differentials, axles, brakes, steering, hydraulics, loading mechanisms, and bodies/frames. The manual outlines how to use it, defines technical terms, and describes how to read wiring diagrams. Safety notices are included to ensure safe service procedures.
Nissan Forklift Electric P01 Series Service Repair Manual.pdfhmc151121
This service manual provides maintenance and repair procedures for the NISSAN FORKLIFT P01 and P02 series. It consists of 14 sections covering general information, maintenance, control systems, batteries/chargers, electrical systems, motor mechanisms, differentials, axles, brakes, steering, hydraulics, loading mechanisms, and bodies/frames. Any updates will be announced in technical bulletins to supplement the appropriate sections. Revised sections will replace applicable sections as needed. Precautions are outlined to ensure safety during procedures.
Nissan Forklift Electric 1N1 Series Service Repair Manual.pdfhmc151121
This document provides an introduction to a service manual for the NISSAN FORKLIFT 1N1 series. It explains that the manual contains maintenance and repair procedures and should be read thoroughly for safety. The manual consists of 14 sections covering general information, maintenance, control systems, batteries, electrical systems, motors, drive units, tires, brakes, rear axles, steering, hydraulics, loading mechanisms, bodies and frames, and options. Technical bulletins will announce any changes to models or sections. Proper service is important for safety and performance.
Nissan Forklift Electric 1B2 Series Service Repair Manual.pdfhmc151121
The document provides instructions for removing and installing a differential carrier. Key steps include draining the gear oil, removing the front wheels, brake components, and traction motor. The differential carrier is then removed from the axle housing or axle tubes are removed from the carrier. Installation involves cleaning mating surfaces, applying grease, and tightening bolts to the specified torques. Proper lifting techniques and plugging open lines are emphasized for safety.
Nissan Forklift Electric 1B1 Series Service Repair Manual.pdfhmc151121
The document provides instructions for removing and installing a differential carrier. Key steps include draining the gear oil, removing the front wheels, brake components, and traction motor. The differential carrier is then removed from the axle housing or axle tubes are removed from the carrier. Installation involves cleaning mating surfaces, applying grease, and tightening bolts to the specified torques. Proper lifting techniques and plugging open lines are emphasized for safety.
Nissan Forklift A-frame - ATF Series Service Repair Manual.pdfhmc151121
The document is a service manual for the A-Ergo model of stand-on stacker trucks. It provides information on safety, technical specifications, dimensions, component details, and maintenance procedures. Key details include permitted lifting points, safety instructions for working on the truck, and specifications for components like the drive motor, gearbox, and hydraulic system. The manual is intended to enable quick and correct service of the A-Ergo truck models.
Nissan Forklift A-frame - ASN Series Service Repair Manual.pdfhmc151121
This document is the service manual for the A-Ergo model of stand-on stacker trucks made by ATLET. It provides information on the structure and contents of the manual, as well as safety instructions for working on the trucks. Technicians should take proper precautions such as locking out the mast, removing jewelry, and securing the truck before performing any service to avoid risk of injury. The manual also includes technical specifications and components of the A-Ergo trucks.
Nissan Forklift A-frame - AJN Series Service Repair Manual.pdfhmc151121
The document is a service manual for the A-Ergo model of stand-on stacker trucks. It provides information on safety, technical specifications, dimensions, component details, and maintenance procedures. Key details include permitted lifting points, safety instructions for working on the truck, and component specifications for items like the drive motor, gearbox, and hydraulic system. The manual is intended to enable quick and correct service of the A-Ergo truck models.
New Holland W300C Wheel Loader Service Repair Manual.pdfhmc151121
This document is a service manual for CNH Italia S.p.A. wheel loaders models W270C and W300C. It contains instructions and specifications for servicing and repairing components of the wheel loaders. The manual is divided into tabs covering general information, engines, fuel system, electrical systems, steering, powertrain, brakes, hydraulics, and mounted equipment. The document provided is the table of contents, which lists each section number and title. It does not contain any repair or service instructions.
New Holland W300C Tier 4 Wheel Loader Service Repair Manual.pdfhmc151121
This document is a service manual for a wheel loader that provides specifications and repair instructions. It contains sections on the engine, transmission, drivetrain, brakes, hydraulics, frames, steering, wheels, cab controls, electrical systems, attachments, and other components. Tables provide torque specifications for fasteners in decimal, metric, and hydraulic fitting sections.
New Holland W270C Wheel Loader Service Repair Manual.pdfhmc151121
This document is a service manual for CNH Italia S.p.A. wheel loaders models W270C and W300C. It contains instructions and specifications for servicing and repairing components of the wheel loaders. The manual is divided into tabs covering general information, engines, fuel system, electrical systems, steering, powertrain, brakes, hydraulics, and mounted equipment. The document provides an index of sections for each component system and instructions for tasks like removing and installing engines, radiators, transmissions, hydraulic pumps and more. Safety practices and torque specifications are also included.
New Holland W270C Tier 4 Wheel Loader Service Repair Manual.pdfhmc151121
This document is a service manual for a wheel loader that provides specifications and repair instructions. It contains sections on the engine, transmission, drivetrain, brakes, hydraulics, frames, steering, wheels, cab controls, electrical systems, attachments, and other components. Tables provide torque specifications for fasteners in decimal, metric, and hydraulic fitting sections.
New Holland W230C Wheel Loader Service Repair Manual.pdfhmc151121
This document provides instructions for removing the engine from a W230C Wheel Loader. It is a service manual section that outlines 16 steps for engine removal, including draining fluids, disconnecting wiring harnesses and hoses, removing mounting bolts, and lifting the engine out after the hood is raised. The overall process described provides the essential details to safely and properly remove the engine from the vehicle.
New Holland W230C Tier 4A (interim) Wheel Loader Service Repair Manual.pdfhmc151121
This service manual provides specifications and repair information for Tier 4A interim wheel loaders. It covers the engine, transmission, drivetrain, brakes, hydraulics, frames, steering, wheels, cab climate control, electrical systems, front loader, bucket, cab, and decals. The manual includes an introduction on safety rules, product identification, and general engine specifications for the W190C and W230C models.
New Holland W230C Tier 4 Wheel Loader Service Repair Manual.pdfhmc151121
This document provides instructions for removing the engine from a wheel loader. It involves marking components for reinstallation, draining fluids like coolant and oil, disconnecting batteries, and using lifting straps to remove the engine. Removal requires proper safety procedures and draining of hydraulic pressure before disconnecting hoses and electrical connections.
New Holland W190C Wheel Loader Service Repair Manual.pdfhmc151121
This section of the service manual provides instructions for removing and installing the engine and radiator on a W190C Wheel Loader. The engine removal process involves disconnecting battery cables, draining fluids, removing mounting brackets and the drive belt. Engine installation is the reverse of removal. Radiator removal involves draining coolant and disconnecting hoses, while installation reconnects all hoses and refills the coolant.
New Holland W190C Tier 4A (interim) Wheel Loader Service Repair Manual.pdfhmc151121
This service manual provides specifications and repair information for Tier 4A interim wheel loaders. It covers the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, front loader, platform and safety features. The manual includes an introduction on safety procedures and product identification.
New Holland W190C Tier 4 Wheel Loader Service Repair Manual.pdfhmc151121
The document provides step-by-step instructions for removing the engine from a W190C Wheel Loader. Key steps include draining fluids, disconnecting wiring harnesses and hoses, removing the hood and mounting brackets, and then lifting the engine out of the machine. Specific components addressed include the radiator, air cleaner, muffler, belts, and hoses connecting the engine to other systems. Safety precautions are noted such as releasing pressure from hydraulic and cooling systems before disconnection.
New Holland W170C Wheel Loader Service Repair Manual.pdfhmc151121
This section provides instructions for removing and installing the engine and radiator on a W170C Wheel Loader. The engine removal process involves disconnecting battery cables, draining fluids, removing mounted components, and using an overhead hoist to lift the engine from the machine. Installation is largely the reverse process. Radiator removal involves draining coolant and removing mounting hardware, while installation reconnects hoses and refills the cooling system.
New Holland W170B Wheel Loader Service Repair Manual.pdfhmc151121
This document provides instructions for removing the engine from a wheel loader. It outlines 24 steps, including draining fluids, disconnecting hoses and wiring, and removing mounting hardware. The engine and radiator are removed together. Lifting straps are used to safely raise the hood for improved access during removal.
New Holland W130C Tier 4 Wheel Loader Service Repair Manual.pdfhmc151121
This section describes the removal and installation procedures for the engine and radiator on a W130C wheel loader. The key steps for engine removal include disconnecting batteries, draining fluids, removing mounting brackets and hoses. Installation is the reverse of removal. Radiator removal involves disconnecting hoses and electrical connections, and removing mounting bolts. Installation is also the reverse of removal. Torque specifications are provided for critical fasteners.
New Holland W110C Tier 4 Wheel Loader Service Repair Manual.pdfhmc151121
This document is a service manual that provides instructions for removing the engine from a W110C Wheel Loader. It is a 12-step process that includes parking the machine, discharging pressure from hydraulic and brake systems, draining coolant and oil, disconnecting batteries, and using lifting straps to remove the engine. Safety precautions like loosening the hydraulic reservoir cap and putting the master disconnect in the off position are emphasized. The document provides detailed photos and descriptions to guide the removal process.
New Holland W80BTC Wheel Loader Service Repair Manual.pdfhmc151121
This repair manual provides technical information for engineers to service wheel loaders models W50BTC, W60BTC, W70BTC, and W80BTC. It consists of two volumes, one covering the wheel loaders and one covering the engine. The manual contains information on repair procedures, necessary tools, and service standards. It is intended as a reference for maintenance and repair work on the machines and engines. Safety instructions are provided to prevent accidents during repair work.
New Holland W80 Compact Wheel Loader Parts Catalogue Manual.pdfhmc151121
This document contains a section index and parts listings for various components of an agricultural machine. The section index lists parts categories including the frame, axles, wheels, prop shaft, tanks, ballast, motor/drivetrain parts, and more. Specific part numbers, descriptions, quantities and references to related part figures are provided for items such as the front frame with mounting parts, joint parts for the frame, and rear frame with mounting parts.
Nissan Forklift Electric 1B1 Series Service Repair Manual.pdfhmc151121
The document provides instructions for removing and installing a differential carrier. Key steps include draining the gear oil, removing the front wheels, brake components, and traction motor. The differential carrier is then removed from the axle housing or axle tubes are removed from the carrier. Installation involves cleaning mating surfaces, applying grease, and tightening bolts to the specified torques. Proper lifting techniques and plugging open lines are emphasized for safety.
Nissan Forklift A-frame - ATF Series Service Repair Manual.pdfhmc151121
The document is a service manual for the A-Ergo model of stand-on stacker trucks. It provides information on safety, technical specifications, dimensions, component details, and maintenance procedures. Key details include permitted lifting points, safety instructions for working on the truck, and specifications for components like the drive motor, gearbox, and hydraulic system. The manual is intended to enable quick and correct service of the A-Ergo truck models.
Nissan Forklift A-frame - ASN Series Service Repair Manual.pdfhmc151121
This document is the service manual for the A-Ergo model of stand-on stacker trucks made by ATLET. It provides information on the structure and contents of the manual, as well as safety instructions for working on the trucks. Technicians should take proper precautions such as locking out the mast, removing jewelry, and securing the truck before performing any service to avoid risk of injury. The manual also includes technical specifications and components of the A-Ergo trucks.
Nissan Forklift A-frame - AJN Series Service Repair Manual.pdfhmc151121
The document is a service manual for the A-Ergo model of stand-on stacker trucks. It provides information on safety, technical specifications, dimensions, component details, and maintenance procedures. Key details include permitted lifting points, safety instructions for working on the truck, and component specifications for items like the drive motor, gearbox, and hydraulic system. The manual is intended to enable quick and correct service of the A-Ergo truck models.
New Holland W300C Wheel Loader Service Repair Manual.pdfhmc151121
This document is a service manual for CNH Italia S.p.A. wheel loaders models W270C and W300C. It contains instructions and specifications for servicing and repairing components of the wheel loaders. The manual is divided into tabs covering general information, engines, fuel system, electrical systems, steering, powertrain, brakes, hydraulics, and mounted equipment. The document provided is the table of contents, which lists each section number and title. It does not contain any repair or service instructions.
New Holland W300C Tier 4 Wheel Loader Service Repair Manual.pdfhmc151121
This document is a service manual for a wheel loader that provides specifications and repair instructions. It contains sections on the engine, transmission, drivetrain, brakes, hydraulics, frames, steering, wheels, cab controls, electrical systems, attachments, and other components. Tables provide torque specifications for fasteners in decimal, metric, and hydraulic fitting sections.
New Holland W270C Wheel Loader Service Repair Manual.pdfhmc151121
This document is a service manual for CNH Italia S.p.A. wheel loaders models W270C and W300C. It contains instructions and specifications for servicing and repairing components of the wheel loaders. The manual is divided into tabs covering general information, engines, fuel system, electrical systems, steering, powertrain, brakes, hydraulics, and mounted equipment. The document provides an index of sections for each component system and instructions for tasks like removing and installing engines, radiators, transmissions, hydraulic pumps and more. Safety practices and torque specifications are also included.
New Holland W270C Tier 4 Wheel Loader Service Repair Manual.pdfhmc151121
This document is a service manual for a wheel loader that provides specifications and repair instructions. It contains sections on the engine, transmission, drivetrain, brakes, hydraulics, frames, steering, wheels, cab controls, electrical systems, attachments, and other components. Tables provide torque specifications for fasteners in decimal, metric, and hydraulic fitting sections.
New Holland W230C Wheel Loader Service Repair Manual.pdfhmc151121
This document provides instructions for removing the engine from a W230C Wheel Loader. It is a service manual section that outlines 16 steps for engine removal, including draining fluids, disconnecting wiring harnesses and hoses, removing mounting bolts, and lifting the engine out after the hood is raised. The overall process described provides the essential details to safely and properly remove the engine from the vehicle.
New Holland W230C Tier 4A (interim) Wheel Loader Service Repair Manual.pdfhmc151121
This service manual provides specifications and repair information for Tier 4A interim wheel loaders. It covers the engine, transmission, drivetrain, brakes, hydraulics, frames, steering, wheels, cab climate control, electrical systems, front loader, bucket, cab, and decals. The manual includes an introduction on safety rules, product identification, and general engine specifications for the W190C and W230C models.
New Holland W230C Tier 4 Wheel Loader Service Repair Manual.pdfhmc151121
This document provides instructions for removing the engine from a wheel loader. It involves marking components for reinstallation, draining fluids like coolant and oil, disconnecting batteries, and using lifting straps to remove the engine. Removal requires proper safety procedures and draining of hydraulic pressure before disconnecting hoses and electrical connections.
New Holland W190C Wheel Loader Service Repair Manual.pdfhmc151121
This section of the service manual provides instructions for removing and installing the engine and radiator on a W190C Wheel Loader. The engine removal process involves disconnecting battery cables, draining fluids, removing mounting brackets and the drive belt. Engine installation is the reverse of removal. Radiator removal involves draining coolant and disconnecting hoses, while installation reconnects all hoses and refills the coolant.
New Holland W190C Tier 4A (interim) Wheel Loader Service Repair Manual.pdfhmc151121
This service manual provides specifications and repair information for Tier 4A interim wheel loaders. It covers the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, front loader, platform and safety features. The manual includes an introduction on safety procedures and product identification.
New Holland W190C Tier 4 Wheel Loader Service Repair Manual.pdfhmc151121
The document provides step-by-step instructions for removing the engine from a W190C Wheel Loader. Key steps include draining fluids, disconnecting wiring harnesses and hoses, removing the hood and mounting brackets, and then lifting the engine out of the machine. Specific components addressed include the radiator, air cleaner, muffler, belts, and hoses connecting the engine to other systems. Safety precautions are noted such as releasing pressure from hydraulic and cooling systems before disconnection.
New Holland W170C Wheel Loader Service Repair Manual.pdfhmc151121
This section provides instructions for removing and installing the engine and radiator on a W170C Wheel Loader. The engine removal process involves disconnecting battery cables, draining fluids, removing mounted components, and using an overhead hoist to lift the engine from the machine. Installation is largely the reverse process. Radiator removal involves draining coolant and removing mounting hardware, while installation reconnects hoses and refills the cooling system.
New Holland W170B Wheel Loader Service Repair Manual.pdfhmc151121
This document provides instructions for removing the engine from a wheel loader. It outlines 24 steps, including draining fluids, disconnecting hoses and wiring, and removing mounting hardware. The engine and radiator are removed together. Lifting straps are used to safely raise the hood for improved access during removal.
New Holland W130C Tier 4 Wheel Loader Service Repair Manual.pdfhmc151121
This section describes the removal and installation procedures for the engine and radiator on a W130C wheel loader. The key steps for engine removal include disconnecting batteries, draining fluids, removing mounting brackets and hoses. Installation is the reverse of removal. Radiator removal involves disconnecting hoses and electrical connections, and removing mounting bolts. Installation is also the reverse of removal. Torque specifications are provided for critical fasteners.
New Holland W110C Tier 4 Wheel Loader Service Repair Manual.pdfhmc151121
This document is a service manual that provides instructions for removing the engine from a W110C Wheel Loader. It is a 12-step process that includes parking the machine, discharging pressure from hydraulic and brake systems, draining coolant and oil, disconnecting batteries, and using lifting straps to remove the engine. Safety precautions like loosening the hydraulic reservoir cap and putting the master disconnect in the off position are emphasized. The document provides detailed photos and descriptions to guide the removal process.
New Holland W80BTC Wheel Loader Service Repair Manual.pdfhmc151121
This repair manual provides technical information for engineers to service wheel loaders models W50BTC, W60BTC, W70BTC, and W80BTC. It consists of two volumes, one covering the wheel loaders and one covering the engine. The manual contains information on repair procedures, necessary tools, and service standards. It is intended as a reference for maintenance and repair work on the machines and engines. Safety instructions are provided to prevent accidents during repair work.
New Holland W80 Compact Wheel Loader Parts Catalogue Manual.pdfhmc151121
This document contains a section index and parts listings for various components of an agricultural machine. The section index lists parts categories including the frame, axles, wheels, prop shaft, tanks, ballast, motor/drivetrain parts, and more. Specific part numbers, descriptions, quantities and references to related part figures are provided for items such as the front frame with mounting parts, joint parts for the frame, and rear frame with mounting parts.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
7. INTRODUCTION
Foreword
TC5040, TC5050, TC5060, TC5070, TC5080, TC5070, TC5080, TC5080 Hillside
IMPORTANT INFORMATION
All repair and maintenance works listed in this manual must be carried out only by staff belonging to the NEW HOL-
LAND Service network, strictly complying with the instructions given and using, whenever required, the special tools.
Anyone who carries out the above operations without complying with the prescriptions shall be responsible for the
subsequent damages.
The manufacturer and all the organizations of its distribution chain, including - without limitation - national, regional or
local dealers, reject any responsibility for damages due to the anomalous behavior of parts and/or components not
approved by the manufacturer himself, including those used for the servicing or repair of the product manufactured
or marketed by the Manufacturer. In any case, no warranty is given or attributed on the product manufactured or
marketed by the Manufacturer in case of damages due to an anomalous behavior of parts and/or components not
approved by the Manufacturer.
No reproduction, though partial of text and illustrations allowed
84565976A 11/04/2012
3
8. INTRODUCTION
Basic instructions - How To Use and Navigate Through This Manual
Technical Information
This manual has been produced by a new technical information system. This new system is designed to deliver
technical information electronically through Web delivery (eTim), DVD and in paper manuals. A coding system called
SAP has been developed to link the technical information to other Product Support functions, e.g., Warranty.
Technical information is written to support the maintenance and service of the functions or systems on a customer's
machine. When a customer has a concern on his machine it is usually because a function or system on his machine
is not working at all, is not working efficiently, or is not responding correctly to his commands. When you refer to
the technical information in this manual to resolve that customer's concern, you will find all the information classified
using the SAP coding, according to the functions or systems on that machine. Once you have located the technical
information for that function or system then you will find all the mechanical, electrical or hydraulic devices, compo-
nents, assemblies and sub assemblies for that function or system. You will also find all the types of information that
have been written for that function or system, the technical data (specifications), the functional data (how it works),
the diagnostic data (fault codes and troubleshooting) and the service data (remove, install adjust, etc.).
By integrating SAP coding into technical information, you will be able to search and retrieve just the right piece of
technical information you need to resolve that customer's concern on his machine. This is made possible by attaching
3 categories to each piece of technical information during the authoring process.
The first category is the Location, the second category is the Information Type and the third category is the Product:
• LOCATION - is the component or function on the machine, that the piece of technical information is going to
describe e.g. Fuel tank.
• INFORMATION TYPE - is the piece of technical information that has been written for a particular component or
function on the machine e.g. Capacity would be a type of Technical Data that would describe the amount of fuel
held by the Fuel tank.
• PRODUCT - is the model for which the piece of technical information is written.
Every piece of technical information will have those 3 categories attached to it. You will be able to use any combination
of those categories to find the right piece of technical information you need to resolve that customer's concern on his
machine.
That information could be:
• the description of how to remove the cylinder head
• a table of specifications for a hydraulic pump
• a fault code
• a troubleshooting table
• a special tool
84565976A 11/04/2012
4
9. INTRODUCTION
How to Use this Manual
This manual is divided into Sections. Each Section is then divided into Chapters. Contents pages are included at the
beginning of the manual, then inside every Section and inside every Chapter. An alphabetical Index is included at the
end of a Chapter. Page number references are included for every piece of technical information listed in the Chapter
Contents or Chapter Index.
Each Chapter is divided into four Information types:
• Technical Data (specifications) for all the mechanical, electrical or hydraulic devices, components and, assem-
blies.
• Functional Data (how it works) for all the mechanical, electrical or hydraulic devices, components and assem-
blies.
• Diagnostic Data (fault codes, electrical and hydraulic troubleshooting) for all the mechanical, electrical or hy-
draulic devices, components and assemblies.
• Service Data (remove disassembly, assemble, install) for all the mechanical, electrical or hydraulic devices,
components and assemblies.
Sections
Sections are grouped according to the main functions or a systems on the machine. Each Section is identified by a
number 00, 35, 55, etc. The amount of Sections included in the manual will depend on the type and function of the
machine that the manual is written for. Each Section has a Contents page listed in alphabetic/numeric order. This
table illustrates which Sections could be included in a manual for a particular product.
PRODUCT
Tractors
Vehicles with working arms: backhoes, excavators,
skid steers, ….
Combines, forage harvesters, balers, ….
Seeding, planting, floating, spraying
equipment, ….
SECTION Mounted equipment and tools, ….
00 - Maintenance X X X X X
05 - Machine completion and equipment
10 - Engine X X X X
14 - Main gearbox and drive
18 - Clutch X
21 - Transmission X X X X
23 - Four wheel drive system X X X
25 - Front axle system X X
27 - Rear axle system X X X X
29 - Hydrostatic drive X
31 - Implement power take-off
33 - Brakes and controls
35 - Hydraulic systems
36 - Pneumatic system
37 - Hitches, drawbars and implement couplings
39 - Frames and ballasting
41 - Steering
44 - Wheels
46 - Steering clutches
48 - Tracks and track suspension
50 - Cab climate control
55 - Electrical systems
56 - Grape harvester shaking
58 - Attachments/headers
60 - Product feeding
84565976A 11/04/2012
5
10. INTRODUCTION
61 - Metering system
62 - Pressing - Bale formation
63 - Chemical applicators
64 - Chopping
66 - Threshing
68 - Tying/Wrapping/Twisting
69 - Bale wagons
70 - Ejection
71 - Lubrication system
72 - Separation
73 - Residue handling
74 - Cleaning
75 - Soil preparation/Finishing
76 - Secondary cleaning / Destemmer
77 - Seeding
78 - Spraying
79 - Planting
80 - Crop storage / Unloading
82 - Front loader and bucket
83 - Telescopic single arm
84 - Booms, dippers and buckets
86 - Dozer blade and arm
88 - Accessories
89 - Tools
90 - Platform, cab, bodywork and decals
84565976A 11/04/2012
6
12. Engine - Engine air compressor
Air compressor - Static description
TC5070, TC5080, TC5070, TC5080, TC5080 Hillside
The air compressor (3) is a single cylinder, gear driven air compressor, which supplies air to a reservoir tank, enabling
the operator to have a source of compressed air for cleaning purposes and tyre inflation. The compressor is mounted
directly on the engine with the two nuts (10).
Engine oil is supplied through an internal connection with the engine, using engine oil pressure to lubricate the com-
pressor.
The compressed air is delivered through tubing to a combination pressure relief control valve, and from there to the
reservoir tank located on the straw hood of the combine. A quick disconnect fitting allows easy connection to the air
supply for blow off nozzles as well as for tyre inflation equipment.
ZEIL06CS0085A0B 1
84565976A 11/04/2012
10.450 / 3
13. Engine - Engine air compressor
Air compressor - Drawing
TC5070, TC5080, TC5070, TC5080, TC5080 Hillside
ZEIL11CX0668G0B 1
Reference Port Port Name Port Function
1 0 Inlet Port Supplies Compressor with clean intake air
2 2 Discharge Port Expels pressurized air for system
4 8.1 Oil Supply Supplies compressor with lube oil from engine
5 8.2 Oil Drain Allows lube oil to return to engine
6 9.1 Coolant Receive coolant from engine
7 9.2 Coolant Return coolant to engine
84565976A 11/04/2012
10.450 / 4
14. Engine - Engine air compressor
Compressed air tank Relief valve - Drawing
TC5070, TC5080, TC5070, TC5080, TC5080 Hillside
ZEIL11CX0667G0B 1
Reference Port Port name Port function
1 1 Inlet Pressurized air "in" from compressor
2 21 Outlet Pressurized air "out" to reservoir tank and blow
off line quick connect port
3 22 Auxiliary supply Auxiliary port not used in this application
4 1-2 Tire inflation device Port used to connect tire inflation device
5 3 Exhaust for compressor idling Discharge exhaust for excess pressure in system
84565976A 11/04/2012
10.450 / 5
15. Engine - Engine air compressor
Compressed air tank Relief valve - Static description
TC5070, TC5080, TC5070, TC5080, TC5080 Hillside
The pressure relief valve is developed to protect the system against pressures higher than 8 bar ( 116 psi).
Port (1) is connected to the air compressor, port (21) is connected to the pressurized reservoir.
When the pressure on port (21) reaches 8 bar ( 116 psi), the control valve (9d) will be activated which means that
also control valve (9c) will be activated. The pressure from the compressor will now pass through port (3).
If the pressure drops below 8 bar ( 116 psi) by activation a engaging valve, control valve (9d) will close.
Valve (9c) will not close immediately but will remain in the open position until the pressure exerted on the control of
valve (9c) will be reduced by 0.6 bar ( 8.7 psi). Then the air will pass through valve (9b).
Schematic diagram
ZDA7672Z 1
84565976A 11/04/2012
10.450 / 6
16. Engine - Engine air compressor
Air compressor - Remove
TC5070, TC5080, TC5070, TC5080, TC5080 Hillside
1. Bleed the air from the system by opening the drain
(2) at the bottom of the air reservoir.
ZEIL06TC00034A0 1
2. Loosen the retaining strap (1) and remove the air inlet
pipe (2) from the air compressor (3).
NOTE: Protect the air inlet and outlet ports from dirt
ingress.
3. Loosen the connection (4) to remove the hose (5)
from the air compressor (3).
ZEIL06CS0082A0B 2
4. Drain sufficient coolant from the engine cooling sys-
tem to allow removal of the coolant lines.
NOTE: Refer to the Operator’s Manual of your machine.
5. Loosen the connection (6).
ZEIL06CS0083A0B 3
6. Loosen the connection (7).
7. Remove the four bolts (8) to remove the support (9).
ZEIL06CS0084A0B 4
84565976A 11/04/2012
10.450 / 7
17. Engine - Engine air compressor
8. Remove the two nuts (10) to remove the air compres-
sor (3) from the engine.
ZEIL06CS0085A0B 5
84565976A 11/04/2012
10.450 / 8
18. Engine - Engine air compressor
Air compressor - Install
TC5070, TC5080, TC5070, TC5080, TC5080 Hillside
1. Install the air compressor (3) on the engine and
tighten the two nuts (10).
ZEIL06CS0085A0B 1
NOTE: Make sure that the O-ring (11) is positioned well. If
necessary apply grease.
ZEIL06CS0086A0B 2
2. Install the support (9) with the four bolts (8).
3. Install the tube and tighten the connection (7).
ZEIL06CS0084A0B 3
4. Install the tube and tighten the connection (6).
ZEIL06CS0083A0B 4
84565976A 11/04/2012
10.450 / 9
19. Engine - Engine air compressor
5. Install the hose (5) on the air compressor (3) and
tighten the connection (4).
6. Install the pipe (2) on the air compressor (3) and
tighten the retaining strap (1).
ZEIL06CS0082A0B 5
7. Close the drain (2) at the bottom of the reservoir.
8. Add engine coolant to the cooling system, refer to the
Operator’s Manual for more details.
9. Start the engine to charge the system with air. Al-
low the air system to build up pressure to the gov-
ernor cutout. Stop the engine and use a soap and
water solution at the connection points to check for
air leaks. Make any necessary repairs.
ZEIL06TC00034A0 6
84565976A 11/04/2012
10.450 / 10
20. Engine - Engine air compressor
Air compressor - Troubleshooting
TC5070, TC5080, TC5070, TC5080, TC5080 Hillside
Problem Possible Cause Correction
Compressor continuously
cycles
Governor air leak Refer to the manufacturer’s manual for
governor maintenance and troubleshoot-
ing procedures.
Air leak at governor-compressor attach-
ment
Inspect connection for physical damage.
Inspect and repair connection.
Excessive reservoir contamination Drain reservoir.
No air delivery
Low air delivery
Low air pressure
Discharge line blockage Check for freeze-up in the discharge line.
Check for low spots and eliminate any traps
in the discharge line.
Inspect and repair compressor discharge
port and clear any line restrictions.
Check for carbon build-up. If present,
make sure cooling lines are not kinked or
restricted. If carbon has built up in the
discharge line, replace line.
Inlet line kinked or restricted Inspect the compressor air induction line for
kinks and restrictions. Repair or replace as
necessary.
Governor malfunction or maladjustment Check for correct loader/unloader cycles of
compressor.
External contamination Replace broken, defective or dirty air filters.
Clean surface of compressor.
Chafed or worn discharge line Replace faulty sections of discharge line.
Loose or leaking air line connections Verify all connections are secure. Tighten
to vehicle specifications where necessary.
Inspect port threads for damage. If damage
is extensive, replace cylinder head.
Compressor is noisy Engine oil level too low Check engine oil level and fill to specs
Clogged oil line Remove and clean oil lines
Loose compressor mounting bolts Tighten mounting bolts
Loose accessory drive gear Check fit of drive gear.
Ensure hub is completely seated and
crankshaft nut is tight.
Inspect crankshaft for damage – replace
compressor if crankshaft is damaged.
Broken connecting rod or
crankshaft
Oil starvation to crank pin or front main
bearing.
Check oil pressure. Verify oil passage is
free of obstructions. Make necessary re-
pairs, possibly to include replace compres-
sor.
Compressor leaks engine
coolant
Loose fitting Check fittings at compressor and engine for
leaks and verify that the fittings are torqued
as required.
Cracked coolant port Replace cylinder head.
Porosity in cylinder head Replace cylinder head.
Leaking of gasket internal to the cylinder
head
Verify cylinder head bolts are correctly
torqued. Make necessary adjustments.
Inspect gasket for cracks or signs of wear.
Replace if necessary.
Replace cylinder head.
None of the above, but condition persists Replace compressor.
Compressor head gasket
failure
Discharge line blocked due to freezing or
carbon build-up
Check for trap (low spots) in lines.
Make necessary repairs.
Clear discharge line. Replace line if neces-
sary.
Check for carbon build-up. If carbon
build-up is present, replace the discharge
line.
84565976A 11/04/2012
10.450 / 11
21. Engine - Engine air compressor
Problem Possible Cause Correction
Frozen or blocked line to governor Clear blocked line. Replace line if neces-
sary.
Governor malfunction Repair or replace the governor. Refer
to governor manufacturer’s maintenance
manual for service information.
Incorrect cylinder head bolt torque, machin-
ing defect on cylinder head or block, defec-
tive cylinder head gasket
Inspect gasket. Replace if necessary. Ver-
ify all bolts are correctly torqued. If problem
persists, replace cylinder head.
None of the above, but condition persists Replace compressor cylinder head assem-
bly.
Compressor leaks oil Physical damage or internal problems with
compressor
Replace the compressor.
Unloader leakage Possible internal damage, including worn
or damaged unloader piston O-ring, poros-
ity in unloader piston bore, loose or leaking
seal at unloader piston bore
Replace compressor cylinder head assem-
bly.
Compressor pressurizes
coolant system or coolant
leakage to compressor
inlet
Leaking of gasket internal to the cylinder
head
Inspect gasket. Replace if necessary.
Cavitation or corrosion in cylinder head Replace cylinder head.
Porosity in cylinder head or cylinder head
cracked
Replace cylinder head.
None of above, but condition persists Replace the compressor.
Compressor will not build
pressure to charge air
tank
Drain valve not closed on the air tank Close air tank drain valve
Loose air line fittings Check and tighten air line fittings
Faulty pressure relief valve Replace pressure relief valve
Worn or damaged internal parts in com-
pressor
Remove and rebuild compressor
Compressor builds too
much pressure
Pressure relief valve faulty Replace pressure relief valve
84565976A 11/04/2012
10.450 / 12
22. Clutch - Clutch hydraulic release control
Clutch hydraulic release control - Adjust
TC5040
1. Remove the pin (3) and adjust the height of the pedal
X = 219-229 mm with the adjustment screw (4).
2. Take out the rod (5) and set the adjustment fork (6)
until the pin (3) can be freely fitted ( 0.8 mm clear-
ance).
ZEIL08TC0193B0B 1
84565976A 11/04/2012
18.104 / 3
23. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
24. Clutch - Clutch hydraulic release control
Clutch hydraulic release control - Bleed
TC5040
1. Open the valve (6) until out flowing fluid shows no air
bubbles.
2. After bleeding, fill the reservoir to the maximum level
notch. For oil specifications, refer to your Operator’s
Manual.
ZEIL08TC0193B0B 1
84565976A 11/04/2012
18.104 / 4
25. Clutch - Clutch and components
Clutch - General specification
TC5040
Specifications
Type − Fichtel & Sachs
− Simple
− Diaphragm spring clutch
Diameter 310 mm
Average static sliding torque 47 da Nm
Max. release pressure 2700 N
Engagement pressure 8800-10200 N
Disc thickness 10 mm.
84565976A 11/04/2012
18.110 / 3
26. Clutch - Clutch and components
Clutch - Remove
TC5040
1. Depending on the traction wheel dimensions and on
the clutch accessibility, remove the left hand side
traction wheel.
2. Remove the guards to access the transmission
clutch.
3. Remove the belt of the eccentric shaft towards the
grain elevator auger.
ZEIL08TC0186A0A 1
4. Loosen the bolt (1).
5. Loosen the nut (2), until the lower V−belt can be re-
moved from the clutch input shaft pulley.
ZEIL08TC0187A0B 2
6. Remove the grease line (6).
7. Unscrew the bolts (4) and remove the clutch housing
support (3).
8. Remove the screws (5) and take out the clutch hous-
ing (two holes are available to separate the two hous-
ing parts).
ZEIL08TC0188A0B 3
84565976A 11/04/2012
18.110 / 4
27. Clutch - Clutch and components
Clutch - Install
TC5040
1. Put the clutch housing into place and insert the
screws (5).
2. Put the clutch housing support (3) into place and fas-
ten with the screws (4).
3. Install the grease line (6).
ZEIL08TC0189A0B 1
4. Tighten the nut (2), until the lower V−belt is tight on
the input shaft pulley.
5. Tighten the bolt (1).
ZEIL08TC0190A0B 2
6. Replace the traction wheel if it was previously re-
moved.
ZEIL08TC0191A0A 3
84565976A 11/04/2012
18.110 / 5
28. Clutch - Clutch and components
Clutch - Adjust
TC5040
Diaphragm spring clutches do not need adjustment.
Coil spring clutches (fig. 1)
1. Clutch pedal height (Distance between fly-
wheel and release levers (A) = 54 mm).
2. Remove the safety washers first.
3. Adjust with the nuts (1) after replacing the stan-
dard clutch disc with a 10 mm spacer.
ZEIL08TC0192F0B 1
84565976A 11/04/2012
18.110 / 6