This document is a service manual for New Holland T6 tractor models from 125-180 HP covering Tier 4B and Stage IV emissions regulations. It provides an overview and breakdown of the tractor systems, listing component groups for the engine, transmission, axles, hydraulics, electrical systems, and more. The manual includes over 90 sections that cover the technical information, specifications, and repair/maintenance instructions for the components and systems on the tractor models.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
What Does the Active Steering Malfunction Warning Mean for Your BMWTanner Motors
Discover the reasons why your BMW’s Active Steering malfunction warning might come on. From electrical glitches to mechanical failures and software anomalies, addressing these promptly with professional inspection and maintenance ensures continued safety and performance on the road, maintaining the integrity of your driving experience.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
Core technology of Hyundai Motor Group's EV platform 'E-GMP'Hyundai Motor Group
What’s the force behind Hyundai Motor Group's EV performance and quality?
Maximized driving performance and quick charging time through high-density battery pack and fast charging technology and applicable to various vehicle types!
Discover more about Hyundai Motor Group’s EV platform ‘E-GMP’!
2. SERVICE MANUAL
T6.125 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6125*HEG01001 - ], T6.145 AutoCommand™ Sidewinder II - TIER
4B (FINAL) and STAGE IV (Mother Regulation) [HACT6145*HEG01001 - ],
T6.145 Dynamic Command Sidewinder II - TIER 4B (FINAL) and STAGE IV
(Mother Regulation) [HACT6145*HEG01001 - ], T6.145 Standard - TIER 4B
(FINAL) and STAGE IV (Mother Regulation) [HACT6145*HEG01001 - ], T6.155
AutoCommand™ Sidewinder II - TIER 4B (FINAL) and STAGE IV (Mother
Regulation) [HACT6155*HEG01001 - ], T6.155 Dynamic Command Sidewinder
II - TIER 4B (FINAL) and STAGE IV (Mother Regulation) [HACT6155*HEG01001
- ], T6.155 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6155*HEG01001 - ], T6.160 Standard - TIER 4B (FINAL) and STAGE
IV (Mother Regulation) [HACT6160*KEG01001 - ], T6.165 AutoCommand™
Sidewinder II - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6165*HEG01001 - ], T6.165 Dynamic Command Sidewinder II - TIER
4B (FINAL) and STAGE IV (Mother Regulation) [HACT6165*HEG01001 -
], T6.165 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6165*HEG01001 - ], T6.175 AutoCommand™ Sidewinder II - TIER
4B (FINAL) and STAGE IV (Mother Regulation) [HACT6175*HEG01001 - ],
T6.175 Dynamic Command Sidewinder II - TIER 4B (FINAL) and STAGE IV
(Mother Regulation) [HACT6175*HEG01001 - ], T6.175 Standard - TIER 4B
(FINAL) and STAGE IV (Mother Regulation) [HACT6175*HEG01001 - ], T6.180
AutoCommand™ Sidewinder II - TIER 4B (FINAL) and STAGE IV (Mother
Regulation) [HACT6180*JEG01001 - ], T6.180 Dynamic Command Sidewinder
II - TIER 4B (FINAL) and STAGE IV (Mother Regulation) [HACT6180*HEG01001
- ], T6.180 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6180*HEG01001 - ]
51666758 24/01/2020
EN
3. Link Product / Engine
Product Market Product Engine
T6.145 AutoCommand™
Sidewinder II - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6145*HEG01001 - ]
North America F4DFE414W*B001
T6.155 AutoCommand™
Sidewinder II - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6155*HEG01001 - ]
North America F4DFE414X*B001
T6.165 AutoCommand™
Sidewinder II - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6165*HEG01001 - ]
North America F4DFE414Y*B001
T6.175 AutoCommand™
Sidewinder II - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6175*HEG01001 - ]
North America F4DFE414Z*B001
T6.180 AutoCommand™
Sidewinder II - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6180*JEG01001 - ]
North America F4DFE614G*B002
T6.125 Standard - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6125*HEG01001 - ]
North America F4DFE414D*B002
T6.145 Standard - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6145*HEG01001 - ]
North America F4DFE4134*B011
T6.145 Dynamic Command
Sidewinder II - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6145*HEG01001 - ]
North America F4DFE414W*B001
T6.155 Standard - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6155*HEG01001 - ]
North America F4DFE4133*B014
T6.155 Dynamic Command
Sidewinder II - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6155*HEG01001 - ]
North America F4DFE414X*B001
T6.160 Standard - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6160*KEG01001 - ]
North America F4DFE614B*B002
T6.165 Standard - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6165*HEG01001 - ]
North America F4DFE4132*B010
T6.165 Dynamic Command
Sidewinder II - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6165*HEG01001 - ]
North America F4DFE414Y*B001
51666758 24/01/2020
4. Product Market Product Engine
T6.175 Standard - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6175*HEG01001 - ]
North America F4DFE4131*B015
T6.175 Dynamic Command
Sidewinder II - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6175*HEG01001 - ]
North America F4DFE414Z*B001
T6.180 Standard - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6180*HEG01001 - ]
North America F4DFE6132*B007
T6.180 Dynamic Command
Sidewinder II - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6180*HEG01001 - ]
North America F4DFE614G*B002
51666758 24/01/2020
11. INTRODUCTION
Foreword - Important notice regarding equipment servicing
All repair and maintenance work listed in this manual must be carried out only by qualified dealership personnel,
strictly complying with the instructions given, and using, whenever possible, the special tools.
Anyone who performs repair and maintenance operations without complying with the procedures provided herein
shall be responsible for any subsequent damages.
The manufacturer and all the organizations of its distribution chain, including - without limitation - national, regional, or
local dealers, reject any responsibility for damages caused by parts and/or components not approved by the manu-
facturer, including those used for the servicing or repair of the product manufactured or marketed by the manufacturer.
In any case, no warranty is given or attributed on the product manufactured or marketed by the manufacturer in case
of damages caused by parts and/or components not approved by the manufacturer.
The manufacturer reserves the right to make improvements in design and changes in specifications at any time without
notice and without incurring any obligation to install them on units previously sold. Specifications, descriptions, and
illustrative material herein are as accurate as known at time of publication but are subject to change without notice.
In case of questions, refer to your NEW HOLLAND Sales and Service Networks.
51666758 24/01/2020
3
12. INTRODUCTION
Foreword - How to use and navigate through this manual
This manual has been produced by a new technical information system. This new system is designed to deliver
technical information electronically through web delivery (eTIM), DVD, and paper manuals. A coding system called
SAP has been developed to link the technical information to other Product Support functions, e.g., Warranty.
Technical information is written to support the maintenance and service of the functions or systems on a customer's
machine. When a customer has a concern on their machine it is usually because a function or system on their ma-
chine is not working at all, is not working efficiently, or is not responding correctly to their commands. When you refer
to the technical information in this manual to resolve that customer's concern, you will find all the information classified
using the SAP coding, according to the functions or systems on that machine. Once you have located the technical
information for that function or system, you will then find all the mechanical, electrical or hydraulic devices, compo-
nents, assemblies, and sub assemblies for that function or system. You will also find all the types of information that
have been written for that function or system: the technical data (specifications), the functional data (how it works),
the diagnostic data (fault codes and troubleshooting), and the service data (remove, install adjust, etc.).
By integrating SAP coding into technical information, you will be able to search and retrieve just the right piece of
technical information you need to resolve that customer's concern on his machine. This is made possible by attaching
3 categories to each piece of technical information during the authoring process.
The first category is the Location, the second category is the Information Type and the third category is the Product:
• LOCATION - the component or function on the machine, that the piece of technical information is going to describe
(e.g., Fuel tank).
• INFORMATION TYPE - the piece of technical information that has been written for a particular component or func-
tion on the machine (e.g., Capacity would be a type of Technical Data describing the amount of fuel held by the fuel
tank).
• PRODUCT - the model for which the piece of technical information is written.
Every piece of technical information will have those three categories attached to it. You will be able to use any combi-
nation of those categories to find the right piece of technical information you need to resolve that customer's concern
on their machine.
That information could be:
• the procedure for how to remove the cylinder head
• a table of specifications for a hydraulic pump
• a fault code
• a troubleshooting table
• a special tool
51666758 24/01/2020
4
13. INTRODUCTION
Safety rules
Personal safety
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid possible death or injury.
Throughout this manual you will find the signal words DANGER, WARNING, and CAUTION followed by special in-
structions. These precautions are intended for the personal safety of you and those working with you.
Read and understand all the safety messages in this manual before you operate or service the machine.
DANGER indicates a hazardous situation that, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation that, if not avoided, could result in death or serious injury.
CAUTION indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.
FAILURE TO FOLLOW DANGER, WARNING, AND CAUTION MESSAGES COULD RESULT
IN DEATH OR SERIOUS INJURY.
Machine safety
NOTICE: Notice indicates a situation that, if not avoided, could result in machine or property damage.
Throughout this manual you will find the signal word Notice followed by special instructions to prevent machine or
property damage. The word Notice is used to address practices not related to personal safety.
Information
NOTE: Note indicates additional information that clarifies steps, procedures, or other information in this manual.
Throughout this manual you will find the word Note followed by additional information about a step, procedure, or
other information in the manual. The word Note is not intended to address personal safety or property damage.
51666758 24/01/2020
9
14. SERVICE MANUAL
Engine
T6.125 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6125*HEG01001 - ], T6.145 AutoCommand™ Sidewinder II - TIER
4B (FINAL) and STAGE IV (Mother Regulation) [HACT6145*HEG01001 - ],
T6.145 Dynamic Command Sidewinder II - TIER 4B (FINAL) and STAGE IV
(Mother Regulation) [HACT6145*HEG01001 - ], T6.145 Standard - TIER 4B
(FINAL) and STAGE IV (Mother Regulation) [HACT6145*HEG01001 - ], T6.155
AutoCommand™ Sidewinder II - TIER 4B (FINAL) and STAGE IV (Mother
Regulation) [HACT6155*HEG01001 - ], T6.155 Dynamic Command Sidewinder
II - TIER 4B (FINAL) and STAGE IV (Mother Regulation) [HACT6155*HEG01001
- ], T6.155 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6155*HEG01001 - ], T6.160 Standard - TIER 4B (FINAL) and STAGE
IV (Mother Regulation) [HACT6160*KEG01001 - ], T6.165 AutoCommand™
Sidewinder II - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6165*HEG01001 - ], T6.165 Dynamic Command Sidewinder II - TIER
4B (FINAL) and STAGE IV (Mother Regulation) [HACT6165*HEG01001 -
], T6.165 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6165*HEG01001 - ], T6.175 AutoCommand™ Sidewinder II - TIER
4B (FINAL) and STAGE IV (Mother Regulation) [HACT6175*HEG01001 - ],
T6.175 Dynamic Command Sidewinder II - TIER 4B (FINAL) and STAGE IV
(Mother Regulation) [HACT6175*HEG01001 - ], T6.175 Standard - TIER 4B
(FINAL) and STAGE IV (Mother Regulation) [HACT6175*HEG01001 - ], T6.180
AutoCommand™ Sidewinder II - TIER 4B (FINAL) and STAGE IV (Mother
Regulation) [HACT6180*JEG01001 - ], T6.180 Dynamic Command Sidewinder
II - TIER 4B (FINAL) and STAGE IV (Mother Regulation) [HACT6180*HEG01001
- ], T6.180 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6180*HEG01001 - ]
51666758 24/01/2020
10
15. Engine - Engine and crankcase
Engine - Remove
T6.125 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6125*HEG01001 - ]
NA
T6.145 Dynamic Command Sidewinder II - TIER 4B (FINAL) and STAGE IV
(Mother Regulation) [HACT6145*HEG01001 - ]
NA
T6.145 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6145*HEG01001 - ]
NA
T6.155 Dynamic Command Sidewinder II - TIER 4B (FINAL) and STAGE IV
(Mother Regulation) [HACT6155*HEG01001 - ]
NA
T6.155 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6155*HEG01001 - ]
NA
T6.160 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6160*KEG01001 - ]
NA
T6.165 Dynamic Command Sidewinder II - TIER 4B (FINAL) and STAGE IV
(Mother Regulation) [HACT6165*HEG01001 - ]
NA
T6.165 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6165*HEG01001 - ]
NA
T6.175 Dynamic Command Sidewinder II - TIER 4B (FINAL) and STAGE IV
(Mother Regulation) [HACT6175*HEG01001 - ]
NA
T6.175 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6175*HEG01001 - ]
NA
T6.180 Dynamic Command Sidewinder II - TIER 4B (FINAL) and STAGE IV
(Mother Regulation) [HACT6180*HEG01001 - ]
NA
T6.180 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6180*HEG01001 - ]
NA
Prior operation:
Discharge the air conditioning system, see Air conditioning - Discharging (50.200) Air conditioning - Evacuate
(50.200).
Prior operation:
Disconnect the battery, see Battery - Disconnect (55.302)
Prior operation:
Remove the left-hand fuel tank, see Fuel tank - Remove (10.216)
Prior operation:
Remove the engine hood, see Hood - Remove (90.100)
Prior operation:
Remove the front frame, see Front frame - Remove (39.100)
Prior operation:
Remove the selective catalytic reduction (SRC) muffler, see Selective Catalytic Reduction (SCR) muffler and cat-
alyst - Remove (10.500)
Prior operation:
Remove the coolant control valve, see Coolant control valve - Remove (10.500)
WARNING
Heavy objects!
Lift and handle all heavy components using lift-
ing equipment with adequate capacity. Always
support units or parts with suitable slings or
hooks. Make sure the work area is clear of all
bystanders.
Failure to comply could result in death or seri-
ous injury.
W0398A
WARNING
Avoid injury!
Handle all parts carefully. Do not place your
hands or fingers between parts. Use Personal
Protective Equipment (PPE) as indicated in this
manual, including protective goggles, gloves,
and safety footwear.
Failure to comply could result in death or seri-
ous injury.
W0208A
51666758 24/01/2020
10.1 [10.001] / 3
16. Engine - Engine and crankcase
NOTICE: Emissions sensors mounted in the exhaust stream are sensitive to extreme vibrations. Use of tools that
generate extreme vibrations, such as impact wrenches and hammers, will result in damage to emission sensors.
Avoid using these tools during any service procedure in close proximity of emission sensors. If the use of these tools
cannot be avoided, remove the sensors using extreme caution prior to performing any service procedure.
All Vehicles
1. Drain the transmission oil.
A. Remove the transmission housing drain plug and
drain the transmission oil into a suitable container.
B. Install the drain plug and torque to 68 – 82 N·m (50
– 60 lb ft).
BAIL14TR00962AB 1
2. Disconnect the oil cooler supply and return pipes.
BAIL14TR00882AB 2
3. Remove the oil cooler supply and return pipes.
BAIL14TR00883AB 3
51666758 24/01/2020
10.1 [10.001] / 4
17. Engine - Engine and crankcase
4. • Disconnect the alternator electrical connector.
• Disconnect the in-line electrical connector.
BAIL14TR00936AB 4
5. Remove the side panel mounting bracket.
BAIL14TR00937AB 5
6. Remove the starter motor shield.
A. Cut the cable ties.
B. Remove the starter motor shield retaining bolts.
BAIL14TR00938AB 6
7. Disconnect the starter motor electrical connectors.
BAIL14TR00884AB 7
51666758 24/01/2020
10.1 [10.001] / 5
18. Engine - Engine and crankcase
8. 1. Disconnect the starter motor negative terminal.
2. Disconnect the cab heater supply pipe.
3. Detach the cab heater supply pipe.
BAIL14TR00885AB 8
9. Detach the cab heater supply pipe.
BAIL14TR00886AB 9
10. Disconnect the block heater electrical connector (if fit-
ted).
BAIL14TR00887AB 10
11. Disconnect the heater supply hose from the rear of the
cylinder head.
BAIL12APH145AVA 11
51666758 24/01/2020
10.1 [10.001] / 6
19. Engine - Engine and crankcase
12. Disconnect the engine breather pipe.
BAIL14TR00888AB 12
13. 1. Disconnect the brake fluid reservoir electrical con-
nector.
2. Remove the brake fluid reservoir heat shield.
BAIL15TR00026AA 13
14. Detach the brake fluid reservoir and position it to one
side.
BAIL14TR00939AB 14
15. Disconnect the steering pipes.
NOTE: Mark the pipes to aid installation.
BAIL14TR00940AB 15
51666758 24/01/2020
10.1 [10.001] / 7
20. Engine - Engine and crankcase
16. Remove the fuel line.
BAIL14TR00941AB 16
17. 1. Disconnect the electrical connector (1).
2. Detach the wiring harness (2) from the bracket.
3. Remove the bracket.
BAIL14TR00943AB 17
18. Disconnect the A/C compressor high pressure pipe
and position it to one side.
BAIL14TR00970AB 18
19. Disconnect the water-in-fuel electrical connector.
BAIL14TR00948AB 19
51666758 24/01/2020
10.1 [10.001] / 8
21. Engine - Engine and crankcase
20. Disconnect the differential lock supply pipe.
BAIL14TR00949AB 20
21. 1. Disconnect the in-line electrical connector.
2. Detach the wiring harness from the clip.
3. Cut the cable tie.
NOTICE: Seal all openings using clean blanking plugs.
BAIL14TR00950AB 21
22. 1. Disconnect the in-line electrical connector.
2. Detach the wiring harness from the clip.
BAIL14TR00952AB 22
23. 1. Disconnect the intake air temperature (IAT) sen-
sor electrical connector.
2. Disconnect the air cleaner sensor electrical con-
nectors.
BAIL14TR00971AB 23
51666758 24/01/2020
10.1 [10.001] / 9
22. Engine - Engine and crankcase
24. Disconnect the DEF/ADBLUE® dosing module electri-
cal connector.
BAIL14TR00954AB 24
25. Disconnect the nitrogen oxide (NOx) module electrical
connector.
BAIL14TR00972AB 25
26. 1. Detach the wiring harness from the clips.
2. Disconnect the in-line electrical connector.
BAIL14TR00964AB 26
27. Detach the engine emission filter.
A. Disconnect the engine emission hose (1) from the
bottom of the engine emission filter.
B. Remove the engine emission filter retaining bolts
(2).
C. Detach the engine emission hose (3) from the
retaining clip.
BAIL14TR00973AC 27
51666758 24/01/2020
10.1 [10.001] / 10
23. Engine - Engine and crankcase
28. • Disconnect the coolant expansion tank lower hose.
• Disconnect the exhaust flap coolant hose.
• Disconnect the turbocharger air intake tube.
BAIL14TR00974AB 28
29. 1. Disconnect the coolant line from the DEF/
ADBLUE® dosing module.
2. Disconnect the DEF/ADBLUE® lines from the
DEF/ADBLUE® dosing module.
BAIL14TR00975AB 29
30. Remove the air cleaner frame retaining bolts.
BAIL14TR00976AB 30
31. With the aid of another technician, remove the air
cleaner frame.
BAIL14TR00986AB 31
51666758 24/01/2020
10.1 [10.001] / 11
24. Engine - Engine and crankcase
32. Remove the DEF/ADBLUE® lines.
BAIL14TR00977AB 32
33. 1. Disconnect the turbocharger oil pipes.
2. Disconnect the turbocharger electrical connector.
3.
BAIL14TR00978AB 33
34. 1. Disconnect the exhaust flap to turbocharger
clamp.
2. Remove the turbocharger mounting bracket re-
taining bolts.
BAIL14TR00987AB 34
35. 1. Remove the engine upper frame retaining bolt.
2. Remove the engine upper frame retaining nuts.
BAIL14TR00988AB 35
51666758 24/01/2020
10.1 [10.001] / 12
25. Engine - Engine and crankcase
36. 1. Remove the engine upper frame retaining bolt.
2. Remove the engine upper frame retaining bolts.
3. Remove the engine upper frame retaining nuts.
BAIL14TR00989AB 36
37. Remove the engine upper frame retaining bolts.
BAIL14TR00990AB 37
38. Using suitable lifting equipment, remove the engine
upper frame and diesel oxidation catalyst (DOC) as-
sembly.
BAIL15TR00019AA 38
39. Remove the fuel line from the rear of the cylinder
head.
BAIL15TR00020AA 39
51666758 24/01/2020
10.1 [10.001] / 13
26. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
27. Engine - Engine and crankcase
40. Detach the grid heater relay and position it to one side.
BAIL15TR00021AA 40
41. Remove the engine rear frame right-hand side retain-
ing bolts.
BAIL15TR00022AA 41
42. Remove the engine rear frame.
BAIL15TR00023AA 42
43. Disconnect the steering motor pipes.
BAIL15TR00024AA 43
51666758 24/01/2020
10.1 [10.001] / 14
28. Engine - Engine and crankcase
44. Install three engine lifting eyes 380200013.
BAIL07APH141BVA 44
45. Remove the engine to transmission lower inner retain-
ing bolts.
BAIL14TR00968AB 45
46. Remove the engine to transmission lower outer retain-
ing bolts.
BAIL14TR00969AB 46
51666758 24/01/2020
10.1 [10.001] / 15