This document is a service manual for New Holland T6 tractor models from 125 to 180 horsepower that meet Tier 4B and Stage IV emissions regulations. The manual contains information on systems including the engine, clutch, transmission, 4WD system, front and rear axles, PTO, brakes, hydraulics and more. It provides detailed content on maintenance, repair and troubleshooting of components.
New holland t8.350 696110739 cvt tier 2 tractor service repair manual [zere08...fjjskqweekfsmem
This document is a service manual that provides specifications and repair/maintenance procedures for various tractor models and components, including the engine, transmission, axles, hydraulics, steering, wheels, and tracks. It contains sections on the continuously variable transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and couplings, steering, wheels, and tracks. The manual is intended to guide service technicians in servicing and repairing components of the listed tractor models.
New holland t8.320 pst tier 2 tractor service repair manual [zgre05001 ]fjjskqweekfsmem
This document is a service manual for CNH Industrial tractors that provides information on maintenance and repair for various tractor systems and components. It includes sections covering the engine, transmission, axles, hydraulics, steering, wheels, tracks, cab climate control, and electrical systems. The manual contains detailed descriptions and diagrams to assist technicians with repairs.
New holland t8.320 cvt tier 2 tractor service repair manual [zjre04001 ]fjjskqweekfsmem
This document is a service manual for CNH Industrial tractor models T8.320, T8.350, T8.380, T8.410, and T8.435, and their SmartTrax variants, with continuously variable transmissions. The manual contains information on servicing the engine, transmission, drivetrain, hydraulics, electrical systems, and other components of the tractors. It includes exploded diagrams, specifications, and repair procedures.
New holland t6.180 stage iv tractor service repair manualfjjskqweekfsmem
This service manual provides maintenance and repair information for Case IH T6 tractors models T6.125 through T6.180. The manual covers systems of the tractor such as the engine, transmission, axles, hydraulics, electrical systems, and more. Each system section includes detailed information on components, operation, and repair procedures.
New holland t6.180 dynamic command stage iv tractor service repair manualfjjskqweekfsmem
This document is a service manual that provides maintenance and repair information for various tractor models in the T6 series, including the T6.125, T6.145, T6.155, T6.165, T6.175, T6.160 and T6.180. The manual contains sections covering the engine, clutch, transmission, four-wheel drive system, front and rear axles, power take-off, brakes, hydraulics and other components. It includes detailed content on maintenance, troubleshooting and repair procedures for the different systems and parts.
New holland t6.165 tier 4 b (final) tractor service repair manualfjjskqweekfsmem
This document is a service manual for New Holland T6 tractor models from 125-180 HP, including both standard and automated Command models, that comply with EPA Tier 4B and EU Stage IV emissions regulations. The manual contains over 50 sections that provide information on systems like the engine, transmission, axles, hydraulics, electrical systems, and more. Each section includes subsections on specific components to aid in repair and maintenance.
New holland t6.165 dynamic command tier 4 b (final) tractor service repair ma...fjjskqweekfsmem
This document is a service manual for New Holland T6 tractor models from 125-180 HP covering Tier 4B and Stage IV emissions regulations. It provides an overview and breakdown of the tractor systems, listing component groups for the engine, transmission, axles, hydraulics, electrical systems, and more. The manual includes over 90 sections that cover the technical information, specifications, and repair/maintenance instructions for the components and systems on the tractor models.
New holland t6.160 tier 4 b (final) tractor service repair manualfjjskqweekfsmem
This document is a service manual for New Holland T6 tractor models from 125 to 180 horsepower that meet Tier 4B and Stage IV emissions regulations. The manual contains information on systems including the engine, clutch, transmission, four-wheel drive, front and rear axles, power take-off, brakes, hydraulics, and their components. The contents section lists over 35 chapters that provide specifications, maintenance, and repair instructions for the various tractor systems.
New holland t8.350 696110739 cvt tier 2 tractor service repair manual [zere08...fjjskqweekfsmem
This document is a service manual that provides specifications and repair/maintenance procedures for various tractor models and components, including the engine, transmission, axles, hydraulics, steering, wheels, and tracks. It contains sections on the continuously variable transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and couplings, steering, wheels, and tracks. The manual is intended to guide service technicians in servicing and repairing components of the listed tractor models.
New holland t8.320 pst tier 2 tractor service repair manual [zgre05001 ]fjjskqweekfsmem
This document is a service manual for CNH Industrial tractors that provides information on maintenance and repair for various tractor systems and components. It includes sections covering the engine, transmission, axles, hydraulics, steering, wheels, tracks, cab climate control, and electrical systems. The manual contains detailed descriptions and diagrams to assist technicians with repairs.
New holland t8.320 cvt tier 2 tractor service repair manual [zjre04001 ]fjjskqweekfsmem
This document is a service manual for CNH Industrial tractor models T8.320, T8.350, T8.380, T8.410, and T8.435, and their SmartTrax variants, with continuously variable transmissions. The manual contains information on servicing the engine, transmission, drivetrain, hydraulics, electrical systems, and other components of the tractors. It includes exploded diagrams, specifications, and repair procedures.
New holland t6.180 stage iv tractor service repair manualfjjskqweekfsmem
This service manual provides maintenance and repair information for Case IH T6 tractors models T6.125 through T6.180. The manual covers systems of the tractor such as the engine, transmission, axles, hydraulics, electrical systems, and more. Each system section includes detailed information on components, operation, and repair procedures.
New holland t6.180 dynamic command stage iv tractor service repair manualfjjskqweekfsmem
This document is a service manual that provides maintenance and repair information for various tractor models in the T6 series, including the T6.125, T6.145, T6.155, T6.165, T6.175, T6.160 and T6.180. The manual contains sections covering the engine, clutch, transmission, four-wheel drive system, front and rear axles, power take-off, brakes, hydraulics and other components. It includes detailed content on maintenance, troubleshooting and repair procedures for the different systems and parts.
New holland t6.165 tier 4 b (final) tractor service repair manualfjjskqweekfsmem
This document is a service manual for New Holland T6 tractor models from 125-180 HP, including both standard and automated Command models, that comply with EPA Tier 4B and EU Stage IV emissions regulations. The manual contains over 50 sections that provide information on systems like the engine, transmission, axles, hydraulics, electrical systems, and more. Each section includes subsections on specific components to aid in repair and maintenance.
New holland t6.165 dynamic command tier 4 b (final) tractor service repair ma...fjjskqweekfsmem
This document is a service manual for New Holland T6 tractor models from 125-180 HP covering Tier 4B and Stage IV emissions regulations. It provides an overview and breakdown of the tractor systems, listing component groups for the engine, transmission, axles, hydraulics, electrical systems, and more. The manual includes over 90 sections that cover the technical information, specifications, and repair/maintenance instructions for the components and systems on the tractor models.
New holland t6.160 tier 4 b (final) tractor service repair manualfjjskqweekfsmem
This document is a service manual for New Holland T6 tractor models from 125 to 180 horsepower that meet Tier 4B and Stage IV emissions regulations. The manual contains information on systems including the engine, clutch, transmission, four-wheel drive, front and rear axles, power take-off, brakes, hydraulics, and their components. The contents section lists over 35 chapters that provide specifications, maintenance, and repair instructions for the various tractor systems.
New holland t6.155 tier 4 b (final) tractor service repair manualfjjskqweekfsmem
This document is a service manual for New Holland T6 tractor models from 125-180 HP covering Tier 4B and Stage IV emissions regulations. It provides an overview and breakdown of the tractor systems, listing component groups for the engine, transmission, axles, hydraulics, electrical systems, and more. The manual includes over 90 sections that cover the technical details, specifications, and repair procedures for the various tractor parts and assemblies.
New holland t6.145 tier 4 b (final) tractor service repair manualfjjskqweekfsmem
This document is a service manual for New Holland T6 tractor models from 125-180 HP covering Tier 4B and Stage IV emissions regulations. It provides an overview and breakdown of the tractor systems, listing component groups for the engine, transmission, axles, hydraulics, electrical systems, and more. The manual includes over 90 sections that cover the technical details, specifications, and repair procedures for the various tractor parts and assemblies.
New holland 9070 m grape harvester service repair manualfjjskqweekfsmem
The document is a service manual that provides maintenance and repair information for grape harvesters. It contains sections covering the engine, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, product feeding, cleaning, secondary cleaning/destemming, crop storage/unloading, accessories, tools, and platform/bodywork. The manual provides detailed views of components, specifications, and procedures for repairs and replacements.
New holland 9070 l grape harvester service repair manualfjjskqweekfsmem
This document is a service manual for grape harvesters models 9050L, 9070L, and 9070M. It contains instructions for repair and maintenance of the engine, hydrostatic drive, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, shaking system, product feeding, cleaning, destemming, crop storage, accessories, tools, and residue handling of the harvesters. The manual is divided into sections covering the various components and systems. Repair and maintenance should only be performed by qualified dealership personnel using the procedures and special tools specified in the manual.
New holland 9050 l grape harvester service repair manualfjjskqweekfsmem
This document is a service manual for grape harvesters models 9050L, 9070L, and 9070M. It contains instructions for repair and maintenance of the engine, hydrostatic drive, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, shaking system, product feeding, cleaning, destemming, crop storage, accessories, tools, and residue handling of the harvesters. The manual is divided into sections covering the various components and systems. Repair and maintenance should only be performed by qualified dealership personnel using the procedures and special tools specified in the manual.
Massey ferguson mf399 tractor parts catalogue manualfjjskqweekfsmem
This document provides a parts book index for a tractor. It includes 3 sections:
1. General information section with symbols, group indexes and notes on parts numbering.
2. Illustrations section with part numbers and references.
3. Numeric index of parts.
The index categorizes parts into groups such as engine, transmission, lighting equipment, front and rear axles, and mechanical accessories to allow users to easily find the relevant information. Special notes provide additional explanation on parts quantity and changes.
Massey ferguson mf398 tractor parts catalogue manualfjjskqweekfsmem
This document provides a parts book index for a tractor. It includes 3 sections:
1. General information section with symbols, group indexes and notes on parts numbering.
2. Illustrations section with part numbers and references.
3. Numeric index of parts.
The index categorizes parts into groups for various tractor systems and components to allow users to easily find the relevant parts illustrations and information. Special notes provide details on parts quantity and the meaning of symbols used in the book.
Massey ferguson mf390 t tractor parts catalogue manualfjjskqweekfsmem
This document provides a parts book index for a tractor. It includes 3 sections:
1. General information section with symbols, group indexes, and notes on parts numbering.
2. Illustration section with part numbers and references.
3. Numeric index of all parts.
The summary outlines the 3 main sections and key information provided in the parts book index document.
Massey ferguson mf390 tractor parts catalogue manualfjjskqweekfsmem
This document provides a parts book index for a tractor. It includes 3 sections:
1. General information section with symbols, group indexes and notes on parts numbering.
2. Illustrations section with part numbers and references.
3. Numeric index of parts.
The index categorizes parts into groups such as engine, transmission, lighting equipment, front and rear axles, and mechanical accessories to allow users to easily find the relevant information. Special notes provide additional explanation on parts quantity and changes.
Massey ferguson mf383 tractor parts catalogue manualfjjskqweekfsmem
This document provides a parts book index for a tractor. It includes 3 sections:
1. General information section with symbols, group indexes and notes on parts numbering.
2. Illustrations section with part numbers and references.
3. Numeric index of parts.
The index categorizes parts into groups for various tractor systems and components to allow users to easily find the relevant parts illustrations and information. Special notes provide details on parts quantity and the meaning of symbols used in the book.
Massey ferguson mf375 tractor parts catalogue manualfjjskqweekfsmem
This document provides a parts book index for a tractor. It includes 3 sections:
1. General information section with symbols, group indexes and notes on parts numbering.
2. Illustrations section with part numbers and references.
3. Numeric index of parts.
The index categorizes parts into groups for various tractor systems and components to allow users to easily find the relevant parts illustrations and information. Special notes provide details on parts quantity and the meaning of symbols used in the book.
Massey ferguson mf365 tractor parts catalogue manualfjjskqweekfsmem
This document provides a parts book index for a tractor. It includes 3 sections:
1. General information section with symbols, group indexes and notes on parts numbering.
2. Illustrations section with part numbers and references.
3. Numeric index of parts.
The index categorizes parts into groups such as engine, transmission, lighting equipment, front and rear axles, and mechanical accessories to allow users to easily find the relevant information. Special notes provide additional explanation on parts quantity and changes.
Caterpillar cat 994 k wheel loader (prefix mm9) service repair manual (mm9000...fjjskqweekfsmem
This document provides instructions for removing and installing different components of the power train on a 994K Wheel Loader, including the trunnion support, differential and bevel gear. The document includes lists of required tools and step-by-step procedures with accompanying illustrations. Key steps include removing the oscillating axle, axle shaft, and fixed axle before removing components like the trunnion support and differential/bevel gear.
Caterpillar cat 966 h wheel loader (prefix bs6) service repair manual (bs6000...fjjskqweekfsmem
The document provides instructions for removing and installing inlet and exhaust valves on a Caterpillar C11 engine. It describes:
1) Using a valve spring compressor tool to remove valve locks, springs, rotators, and valves.
2) Lubricating and installing new valves, seals, springs and locks using the compressor tool.
3) The procedure warns of potential injury from released spring forces.
Caterpillar cat 992 k wheel loader (prefix zmx) service repair manual (zmx000...fjjskqweekfsmem
This document provides assembly instructions for a torque converter used in a 992K wheel loader. It lists over 60 steps and accompanying illustrations to assemble the various components of the torque converter in the proper order. Key components include seals, bearings, gears, plates, pistons, discs, sleeves, and housings. Special tools and lifting devices are required due to the large size and weights of components, which range from 25-680 kg. Proper temperatures and torques are specified for a safe and accurate reassembly of the torque converter.
Caterpillar cat 966 h wheel loader (prefix a6j) service repair manual (a6j018...fjjskqweekfsmem
This document provides instructions for disassembling and assembling components of a 966H wheel loader's power train, including its torque converter and transmission. It describes 33 steps to disassemble and assemble the torque converter, involving removal and installation of over 40 parts like bearings, seals, gears, and housing components. It also outlines 6 steps to separate the transmission from the output transfer gears, and references additional documents for disassembling the transmission planetary. The document is intended as a service repair manual for technicians working on the specified wheel loader models.
Caterpillar cat 992 k wheel loader (prefix rm5) service repair manual (rm5000...fjjskqweekfsmem
The document provides instructions for disassembling and assembling the piston pump (hydraulic fan) of a 992K wheel loader. It lists 35 steps for disassembly, removing components like the head assembly, pistons, springs, and seals. It then lists 15 steps for assembly, installing components like O-rings, sleeves, springs and ensuring proper torque of fasteners. Special tools are required and cleanliness is important for both disassembly and assembly.
Caterpillar cat 992 k wheel loader (prefix kk4) service repair manual (kk4000...fjjskqweekfsmem
This document provides instructions for removing and installing various engine components on a Caterpillar 992K wheel loader with a C32 engine, including:
1. The crankshaft front seal, which involves using tools to puncture and remove the old seal and install a new seal and sleeve.
2. The front gear group, which requires removing bolts and gears and cleaning and lubricating parts during installation.
3. The front housing, which must be cleaned, have sealant applied, and bolts torqued in a specific sequence for proper installation.
4. The rear housing, valve mechanism covers, and valve mechanism cover base, all of which involve removing bolts and seals,
Caterpillar cat 992 k wheel loader (prefix kk2) service repair manual (kk2000...fjjskqweekfsmem
This document provides instructions for removing and installing various components of a 992K wheel loader powered by a C32 engine, including:
1. The crankshaft rear seal using tools like a slide hammer puller and seal distorter.
2. The rear power take-off (RPTO) which involves removing covers, gears, bearings and seals using link brackets and drivers.
3. The vibration damper and pulley requiring guide studs and lifting to remove the dampers and adapter.
4. The crankshaft front seal using similar tools and procedures as the rear seal replacement.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
New holland t6.155 tier 4 b (final) tractor service repair manualfjjskqweekfsmem
This document is a service manual for New Holland T6 tractor models from 125-180 HP covering Tier 4B and Stage IV emissions regulations. It provides an overview and breakdown of the tractor systems, listing component groups for the engine, transmission, axles, hydraulics, electrical systems, and more. The manual includes over 90 sections that cover the technical details, specifications, and repair procedures for the various tractor parts and assemblies.
New holland t6.145 tier 4 b (final) tractor service repair manualfjjskqweekfsmem
This document is a service manual for New Holland T6 tractor models from 125-180 HP covering Tier 4B and Stage IV emissions regulations. It provides an overview and breakdown of the tractor systems, listing component groups for the engine, transmission, axles, hydraulics, electrical systems, and more. The manual includes over 90 sections that cover the technical details, specifications, and repair procedures for the various tractor parts and assemblies.
New holland 9070 m grape harvester service repair manualfjjskqweekfsmem
The document is a service manual that provides maintenance and repair information for grape harvesters. It contains sections covering the engine, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, product feeding, cleaning, secondary cleaning/destemming, crop storage/unloading, accessories, tools, and platform/bodywork. The manual provides detailed views of components, specifications, and procedures for repairs and replacements.
New holland 9070 l grape harvester service repair manualfjjskqweekfsmem
This document is a service manual for grape harvesters models 9050L, 9070L, and 9070M. It contains instructions for repair and maintenance of the engine, hydrostatic drive, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, shaking system, product feeding, cleaning, destemming, crop storage, accessories, tools, and residue handling of the harvesters. The manual is divided into sections covering the various components and systems. Repair and maintenance should only be performed by qualified dealership personnel using the procedures and special tools specified in the manual.
New holland 9050 l grape harvester service repair manualfjjskqweekfsmem
This document is a service manual for grape harvesters models 9050L, 9070L, and 9070M. It contains instructions for repair and maintenance of the engine, hydrostatic drive, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, shaking system, product feeding, cleaning, destemming, crop storage, accessories, tools, and residue handling of the harvesters. The manual is divided into sections covering the various components and systems. Repair and maintenance should only be performed by qualified dealership personnel using the procedures and special tools specified in the manual.
Massey ferguson mf399 tractor parts catalogue manualfjjskqweekfsmem
This document provides a parts book index for a tractor. It includes 3 sections:
1. General information section with symbols, group indexes and notes on parts numbering.
2. Illustrations section with part numbers and references.
3. Numeric index of parts.
The index categorizes parts into groups such as engine, transmission, lighting equipment, front and rear axles, and mechanical accessories to allow users to easily find the relevant information. Special notes provide additional explanation on parts quantity and changes.
Massey ferguson mf398 tractor parts catalogue manualfjjskqweekfsmem
This document provides a parts book index for a tractor. It includes 3 sections:
1. General information section with symbols, group indexes and notes on parts numbering.
2. Illustrations section with part numbers and references.
3. Numeric index of parts.
The index categorizes parts into groups for various tractor systems and components to allow users to easily find the relevant parts illustrations and information. Special notes provide details on parts quantity and the meaning of symbols used in the book.
Massey ferguson mf390 t tractor parts catalogue manualfjjskqweekfsmem
This document provides a parts book index for a tractor. It includes 3 sections:
1. General information section with symbols, group indexes, and notes on parts numbering.
2. Illustration section with part numbers and references.
3. Numeric index of all parts.
The summary outlines the 3 main sections and key information provided in the parts book index document.
Massey ferguson mf390 tractor parts catalogue manualfjjskqweekfsmem
This document provides a parts book index for a tractor. It includes 3 sections:
1. General information section with symbols, group indexes and notes on parts numbering.
2. Illustrations section with part numbers and references.
3. Numeric index of parts.
The index categorizes parts into groups such as engine, transmission, lighting equipment, front and rear axles, and mechanical accessories to allow users to easily find the relevant information. Special notes provide additional explanation on parts quantity and changes.
Massey ferguson mf383 tractor parts catalogue manualfjjskqweekfsmem
This document provides a parts book index for a tractor. It includes 3 sections:
1. General information section with symbols, group indexes and notes on parts numbering.
2. Illustrations section with part numbers and references.
3. Numeric index of parts.
The index categorizes parts into groups for various tractor systems and components to allow users to easily find the relevant parts illustrations and information. Special notes provide details on parts quantity and the meaning of symbols used in the book.
Massey ferguson mf375 tractor parts catalogue manualfjjskqweekfsmem
This document provides a parts book index for a tractor. It includes 3 sections:
1. General information section with symbols, group indexes and notes on parts numbering.
2. Illustrations section with part numbers and references.
3. Numeric index of parts.
The index categorizes parts into groups for various tractor systems and components to allow users to easily find the relevant parts illustrations and information. Special notes provide details on parts quantity and the meaning of symbols used in the book.
Massey ferguson mf365 tractor parts catalogue manualfjjskqweekfsmem
This document provides a parts book index for a tractor. It includes 3 sections:
1. General information section with symbols, group indexes and notes on parts numbering.
2. Illustrations section with part numbers and references.
3. Numeric index of parts.
The index categorizes parts into groups such as engine, transmission, lighting equipment, front and rear axles, and mechanical accessories to allow users to easily find the relevant information. Special notes provide additional explanation on parts quantity and changes.
Caterpillar cat 994 k wheel loader (prefix mm9) service repair manual (mm9000...fjjskqweekfsmem
This document provides instructions for removing and installing different components of the power train on a 994K Wheel Loader, including the trunnion support, differential and bevel gear. The document includes lists of required tools and step-by-step procedures with accompanying illustrations. Key steps include removing the oscillating axle, axle shaft, and fixed axle before removing components like the trunnion support and differential/bevel gear.
Caterpillar cat 966 h wheel loader (prefix bs6) service repair manual (bs6000...fjjskqweekfsmem
The document provides instructions for removing and installing inlet and exhaust valves on a Caterpillar C11 engine. It describes:
1) Using a valve spring compressor tool to remove valve locks, springs, rotators, and valves.
2) Lubricating and installing new valves, seals, springs and locks using the compressor tool.
3) The procedure warns of potential injury from released spring forces.
Caterpillar cat 992 k wheel loader (prefix zmx) service repair manual (zmx000...fjjskqweekfsmem
This document provides assembly instructions for a torque converter used in a 992K wheel loader. It lists over 60 steps and accompanying illustrations to assemble the various components of the torque converter in the proper order. Key components include seals, bearings, gears, plates, pistons, discs, sleeves, and housings. Special tools and lifting devices are required due to the large size and weights of components, which range from 25-680 kg. Proper temperatures and torques are specified for a safe and accurate reassembly of the torque converter.
Caterpillar cat 966 h wheel loader (prefix a6j) service repair manual (a6j018...fjjskqweekfsmem
This document provides instructions for disassembling and assembling components of a 966H wheel loader's power train, including its torque converter and transmission. It describes 33 steps to disassemble and assemble the torque converter, involving removal and installation of over 40 parts like bearings, seals, gears, and housing components. It also outlines 6 steps to separate the transmission from the output transfer gears, and references additional documents for disassembling the transmission planetary. The document is intended as a service repair manual for technicians working on the specified wheel loader models.
Caterpillar cat 992 k wheel loader (prefix rm5) service repair manual (rm5000...fjjskqweekfsmem
The document provides instructions for disassembling and assembling the piston pump (hydraulic fan) of a 992K wheel loader. It lists 35 steps for disassembly, removing components like the head assembly, pistons, springs, and seals. It then lists 15 steps for assembly, installing components like O-rings, sleeves, springs and ensuring proper torque of fasteners. Special tools are required and cleanliness is important for both disassembly and assembly.
Caterpillar cat 992 k wheel loader (prefix kk4) service repair manual (kk4000...fjjskqweekfsmem
This document provides instructions for removing and installing various engine components on a Caterpillar 992K wheel loader with a C32 engine, including:
1. The crankshaft front seal, which involves using tools to puncture and remove the old seal and install a new seal and sleeve.
2. The front gear group, which requires removing bolts and gears and cleaning and lubricating parts during installation.
3. The front housing, which must be cleaned, have sealant applied, and bolts torqued in a specific sequence for proper installation.
4. The rear housing, valve mechanism covers, and valve mechanism cover base, all of which involve removing bolts and seals,
Caterpillar cat 992 k wheel loader (prefix kk2) service repair manual (kk2000...fjjskqweekfsmem
This document provides instructions for removing and installing various components of a 992K wheel loader powered by a C32 engine, including:
1. The crankshaft rear seal using tools like a slide hammer puller and seal distorter.
2. The rear power take-off (RPTO) which involves removing covers, gears, bearings and seals using link brackets and drivers.
3. The vibration damper and pulley requiring guide studs and lifting to remove the dampers and adapter.
4. The crankshaft front seal using similar tools and procedures as the rear seal replacement.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
What Could Cause The Headlights On Your Porsche 911 To Stop WorkingLancer Service
Discover why your Porsche 911 headlights might flicker out unexpectedly. From aging bulbs to electrical gremlins and moisture mishaps, we're delving into the reasons behind the blackout. Stay tuned to illuminate the road ahead and ensure your lights shine bright for safer journeys.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Learn why monitoring your Mercedes' Exhaust Back Pressure (EBP) sensor is crucial. Understand its role in engine performance and emission reduction. Discover five warning signs of EBP sensor failure, from loss of power to increased emissions. Take action promptly to avoid costly repairs and maintain your Mercedes' reliability and efficiency.
What Is Recruitment Processing Outsourcing (RPO) Services?Impeccable HR
Impeccable HR provides a wide range of RPO services for your bulk hiring needs within a stipulated period. They meticulously build RPO solutions to improve your recruitment process. RPO services are great for budget-conscious recruiters who want high-quality personnel.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
Your VW's camshaft position sensor is crucial for engine performance. Signs of failure include engine misfires, difficulty starting, stalling at low speeds, reduced fuel efficiency, and the check engine light. Prompt inspection and replacement can prevent further damage and keep your VW running smoothly.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
2. SERVICE MANUAL
T6.125 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6125*HEG01001 - ], T6.145 AutoCommand™ Sidewinder II - TIER
4B (FINAL) and STAGE IV (Mother Regulation) [HACT6145*HEG01001 - ],
T6.145 Dynamic Command Sidewinder II - TIER 4B (FINAL) and STAGE IV
(Mother Regulation) [HACT6145*HEG01001 - ], T6.145 Standard - TIER 4B
(FINAL) and STAGE IV (Mother Regulation) [HACT6145*HEG01001 - ], T6.155
AutoCommand™ Sidewinder II - TIER 4B (FINAL) and STAGE IV (Mother
Regulation) [HACT6155*HEG01001 - ], T6.155 Dynamic Command Sidewinder
II - TIER 4B (FINAL) and STAGE IV (Mother Regulation) [HACT6155*HEG01001
- ], T6.155 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6155*HEG01001 - ], T6.160 Standard - TIER 4B (FINAL) and STAGE
IV (Mother Regulation) [HACT6160*KEG01001 - ], T6.165 AutoCommand™
Sidewinder II - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6165*HEG01001 - ], T6.165 Dynamic Command Sidewinder II - TIER
4B (FINAL) and STAGE IV (Mother Regulation) [HACT6165*HEG01001 -
], T6.165 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6165*HEG01001 - ], T6.175 AutoCommand™ Sidewinder II - TIER
4B (FINAL) and STAGE IV (Mother Regulation) [HACT6175*HEG01001 - ],
T6.175 Dynamic Command Sidewinder II - TIER 4B (FINAL) and STAGE IV
(Mother Regulation) [HACT6175*HEG01001 - ], T6.175 Standard - TIER 4B
(FINAL) and STAGE IV (Mother Regulation) [HACT6175*HEG01001 - ], T6.180
AutoCommand™ Sidewinder II - TIER 4B (FINAL) and STAGE IV (Mother
Regulation) [HACT6180*JEG01001 - ], T6.180 Dynamic Command Sidewinder
II - TIER 4B (FINAL) and STAGE IV (Mother Regulation) [HACT6180*HEG01001
- ], T6.180 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6180*HEG01001 - ]
51666758 24/01/2020
EN
3. Link Product / Engine
Product Market Product Engine
T6.145 AutoCommand™
Sidewinder II - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6145*HEG01001 - ]
North America F4DFE414W*B001
T6.155 AutoCommand™
Sidewinder II - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6155*HEG01001 - ]
North America F4DFE414X*B001
T6.165 AutoCommand™
Sidewinder II - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6165*HEG01001 - ]
North America F4DFE414Y*B001
T6.175 AutoCommand™
Sidewinder II - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6175*HEG01001 - ]
North America F4DFE414Z*B001
T6.180 AutoCommand™
Sidewinder II - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6180*JEG01001 - ]
North America F4DFE614G*B002
T6.125 Standard - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6125*HEG01001 - ]
North America F4DFE414D*B002
T6.145 Standard - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6145*HEG01001 - ]
North America F4DFE4134*B011
T6.145 Dynamic Command
Sidewinder II - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6145*HEG01001 - ]
North America F4DFE414W*B001
T6.155 Standard - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6155*HEG01001 - ]
North America F4DFE4133*B014
T6.155 Dynamic Command
Sidewinder II - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6155*HEG01001 - ]
North America F4DFE414X*B001
T6.160 Standard - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6160*KEG01001 - ]
North America F4DFE614B*B002
T6.165 Standard - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6165*HEG01001 - ]
North America F4DFE4132*B010
T6.165 Dynamic Command
Sidewinder II - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6165*HEG01001 - ]
North America F4DFE414Y*B001
51666758 24/01/2020
4. Product Market Product Engine
T6.175 Standard - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6175*HEG01001 - ]
North America F4DFE4131*B015
T6.175 Dynamic Command
Sidewinder II - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6175*HEG01001 - ]
North America F4DFE414Z*B001
T6.180 Standard - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6180*HEG01001 - ]
North America F4DFE6132*B007
T6.180 Dynamic Command
Sidewinder II - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6180*HEG01001 - ]
North America F4DFE614G*B002
51666758 24/01/2020
11. INTRODUCTION
Foreword - Important notice regarding equipment servicing
All repair and maintenance work listed in this manual must be carried out only by qualified dealership personnel,
strictly complying with the instructions given, and using, whenever possible, the special tools.
Anyone who performs repair and maintenance operations without complying with the procedures provided herein
shall be responsible for any subsequent damages.
The manufacturer and all the organizations of its distribution chain, including - without limitation - national, regional, or
local dealers, reject any responsibility for damages caused by parts and/or components not approved by the manu-
facturer, including those used for the servicing or repair of the product manufactured or marketed by the manufacturer.
In any case, no warranty is given or attributed on the product manufactured or marketed by the manufacturer in case
of damages caused by parts and/or components not approved by the manufacturer.
The manufacturer reserves the right to make improvements in design and changes in specifications at any time without
notice and without incurring any obligation to install them on units previously sold. Specifications, descriptions, and
illustrative material herein are as accurate as known at time of publication but are subject to change without notice.
In case of questions, refer to your NEW HOLLAND Sales and Service Networks.
51666758 24/01/2020
3
12. INTRODUCTION
Foreword - How to use and navigate through this manual
This manual has been produced by a new technical information system. This new system is designed to deliver
technical information electronically through web delivery (eTIM), DVD, and paper manuals. A coding system called
SAP has been developed to link the technical information to other Product Support functions, e.g., Warranty.
Technical information is written to support the maintenance and service of the functions or systems on a customer's
machine. When a customer has a concern on their machine it is usually because a function or system on their ma-
chine is not working at all, is not working efficiently, or is not responding correctly to their commands. When you refer
to the technical information in this manual to resolve that customer's concern, you will find all the information classified
using the SAP coding, according to the functions or systems on that machine. Once you have located the technical
information for that function or system, you will then find all the mechanical, electrical or hydraulic devices, compo-
nents, assemblies, and sub assemblies for that function or system. You will also find all the types of information that
have been written for that function or system: the technical data (specifications), the functional data (how it works),
the diagnostic data (fault codes and troubleshooting), and the service data (remove, install adjust, etc.).
By integrating SAP coding into technical information, you will be able to search and retrieve just the right piece of
technical information you need to resolve that customer's concern on his machine. This is made possible by attaching
3 categories to each piece of technical information during the authoring process.
The first category is the Location, the second category is the Information Type and the third category is the Product:
• LOCATION - the component or function on the machine, that the piece of technical information is going to describe
(e.g., Fuel tank).
• INFORMATION TYPE - the piece of technical information that has been written for a particular component or func-
tion on the machine (e.g., Capacity would be a type of Technical Data describing the amount of fuel held by the fuel
tank).
• PRODUCT - the model for which the piece of technical information is written.
Every piece of technical information will have those three categories attached to it. You will be able to use any combi-
nation of those categories to find the right piece of technical information you need to resolve that customer's concern
on their machine.
That information could be:
• the procedure for how to remove the cylinder head
• a table of specifications for a hydraulic pump
• a fault code
• a troubleshooting table
• a special tool
51666758 24/01/2020
4
13. INTRODUCTION
Safety rules
Personal safety
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid possible death or injury.
Throughout this manual you will find the signal words DANGER, WARNING, and CAUTION followed by special in-
structions. These precautions are intended for the personal safety of you and those working with you.
Read and understand all the safety messages in this manual before you operate or service the machine.
DANGER indicates a hazardous situation that, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation that, if not avoided, could result in death or serious injury.
CAUTION indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.
FAILURE TO FOLLOW DANGER, WARNING, AND CAUTION MESSAGES COULD RESULT
IN DEATH OR SERIOUS INJURY.
Machine safety
NOTICE: Notice indicates a situation that, if not avoided, could result in machine or property damage.
Throughout this manual you will find the signal word Notice followed by special instructions to prevent machine or
property damage. The word Notice is used to address practices not related to personal safety.
Information
NOTE: Note indicates additional information that clarifies steps, procedures, or other information in this manual.
Throughout this manual you will find the word Note followed by additional information about a step, procedure, or
other information in the manual. The word Note is not intended to address personal safety or property damage.
51666758 24/01/2020
9
14. SERVICE MANUAL
Engine
T6.125 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6125*HEG01001 - ], T6.145 AutoCommand™ Sidewinder II - TIER
4B (FINAL) and STAGE IV (Mother Regulation) [HACT6145*HEG01001 - ],
T6.145 Dynamic Command Sidewinder II - TIER 4B (FINAL) and STAGE IV
(Mother Regulation) [HACT6145*HEG01001 - ], T6.145 Standard - TIER 4B
(FINAL) and STAGE IV (Mother Regulation) [HACT6145*HEG01001 - ], T6.155
AutoCommand™ Sidewinder II - TIER 4B (FINAL) and STAGE IV (Mother
Regulation) [HACT6155*HEG01001 - ], T6.155 Dynamic Command Sidewinder
II - TIER 4B (FINAL) and STAGE IV (Mother Regulation) [HACT6155*HEG01001
- ], T6.155 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6155*HEG01001 - ], T6.160 Standard - TIER 4B (FINAL) and STAGE
IV (Mother Regulation) [HACT6160*KEG01001 - ], T6.165 AutoCommand™
Sidewinder II - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6165*HEG01001 - ], T6.165 Dynamic Command Sidewinder II - TIER
4B (FINAL) and STAGE IV (Mother Regulation) [HACT6165*HEG01001 -
], T6.165 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6165*HEG01001 - ], T6.175 AutoCommand™ Sidewinder II - TIER
4B (FINAL) and STAGE IV (Mother Regulation) [HACT6175*HEG01001 - ],
T6.175 Dynamic Command Sidewinder II - TIER 4B (FINAL) and STAGE IV
(Mother Regulation) [HACT6175*HEG01001 - ], T6.175 Standard - TIER 4B
(FINAL) and STAGE IV (Mother Regulation) [HACT6175*HEG01001 - ], T6.180
AutoCommand™ Sidewinder II - TIER 4B (FINAL) and STAGE IV (Mother
Regulation) [HACT6180*JEG01001 - ], T6.180 Dynamic Command Sidewinder
II - TIER 4B (FINAL) and STAGE IV (Mother Regulation) [HACT6180*HEG01001
- ], T6.180 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6180*HEG01001 - ]
51666758 24/01/2020
10
15. Engine - Engine and crankcase
Engine - Remove
T6.125 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6125*HEG01001 - ]
NA
T6.145 Dynamic Command Sidewinder II - TIER 4B (FINAL) and STAGE IV
(Mother Regulation) [HACT6145*HEG01001 - ]
NA
T6.145 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6145*HEG01001 - ]
NA
T6.155 Dynamic Command Sidewinder II - TIER 4B (FINAL) and STAGE IV
(Mother Regulation) [HACT6155*HEG01001 - ]
NA
T6.155 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6155*HEG01001 - ]
NA
T6.160 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6160*KEG01001 - ]
NA
T6.165 Dynamic Command Sidewinder II - TIER 4B (FINAL) and STAGE IV
(Mother Regulation) [HACT6165*HEG01001 - ]
NA
T6.165 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6165*HEG01001 - ]
NA
T6.175 Dynamic Command Sidewinder II - TIER 4B (FINAL) and STAGE IV
(Mother Regulation) [HACT6175*HEG01001 - ]
NA
T6.175 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6175*HEG01001 - ]
NA
T6.180 Dynamic Command Sidewinder II - TIER 4B (FINAL) and STAGE IV
(Mother Regulation) [HACT6180*HEG01001 - ]
NA
T6.180 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6180*HEG01001 - ]
NA
Prior operation:
Discharge the air conditioning system, see Air conditioning - Discharging (50.200) Air conditioning - Evacuate
(50.200).
Prior operation:
Disconnect the battery, see Battery - Disconnect (55.302)
Prior operation:
Remove the left-hand fuel tank, see Fuel tank - Remove (10.216)
Prior operation:
Remove the engine hood, see Hood - Remove (90.100)
Prior operation:
Remove the front frame, see Front frame - Remove (39.100)
Prior operation:
Remove the selective catalytic reduction (SRC) muffler, see Selective Catalytic Reduction (SCR) muffler and cat-
alyst - Remove (10.500)
Prior operation:
Remove the coolant control valve, see Coolant control valve - Remove (10.500)
WARNING
Heavy objects!
Lift and handle all heavy components using lift-
ing equipment with adequate capacity. Always
support units or parts with suitable slings or
hooks. Make sure the work area is clear of all
bystanders.
Failure to comply could result in death or seri-
ous injury.
W0398A
WARNING
Avoid injury!
Handle all parts carefully. Do not place your
hands or fingers between parts. Use Personal
Protective Equipment (PPE) as indicated in this
manual, including protective goggles, gloves,
and safety footwear.
Failure to comply could result in death or seri-
ous injury.
W0208A
51666758 24/01/2020
10.1 [10.001] / 3
16. Engine - Engine and crankcase
NOTICE: Emissions sensors mounted in the exhaust stream are sensitive to extreme vibrations. Use of tools that
generate extreme vibrations, such as impact wrenches and hammers, will result in damage to emission sensors.
Avoid using these tools during any service procedure in close proximity of emission sensors. If the use of these tools
cannot be avoided, remove the sensors using extreme caution prior to performing any service procedure.
All Vehicles
1. Drain the transmission oil.
A. Remove the transmission housing drain plug and
drain the transmission oil into a suitable container.
B. Install the drain plug and torque to 68 – 82 N·m (50
– 60 lb ft).
BAIL14TR00962AB 1
2. Disconnect the oil cooler supply and return pipes.
BAIL14TR00882AB 2
3. Remove the oil cooler supply and return pipes.
BAIL14TR00883AB 3
51666758 24/01/2020
10.1 [10.001] / 4
17. Engine - Engine and crankcase
4. • Disconnect the alternator electrical connector.
• Disconnect the in-line electrical connector.
BAIL14TR00936AB 4
5. Remove the side panel mounting bracket.
BAIL14TR00937AB 5
6. Remove the starter motor shield.
A. Cut the cable ties.
B. Remove the starter motor shield retaining bolts.
BAIL14TR00938AB 6
7. Disconnect the starter motor electrical connectors.
BAIL14TR00884AB 7
51666758 24/01/2020
10.1 [10.001] / 5
18. Engine - Engine and crankcase
8. 1. Disconnect the starter motor negative terminal.
2. Disconnect the cab heater supply pipe.
3. Detach the cab heater supply pipe.
BAIL14TR00885AB 8
9. Detach the cab heater supply pipe.
BAIL14TR00886AB 9
10. Disconnect the block heater electrical connector (if fit-
ted).
BAIL14TR00887AB 10
11. Disconnect the heater supply hose from the rear of the
cylinder head.
BAIL12APH145AVA 11
51666758 24/01/2020
10.1 [10.001] / 6
19. Engine - Engine and crankcase
12. Disconnect the engine breather pipe.
BAIL14TR00888AB 12
13. 1. Disconnect the brake fluid reservoir electrical con-
nector.
2. Remove the brake fluid reservoir heat shield.
BAIL15TR00026AA 13
14. Detach the brake fluid reservoir and position it to one
side.
BAIL14TR00939AB 14
15. Disconnect the steering pipes.
NOTE: Mark the pipes to aid installation.
BAIL14TR00940AB 15
51666758 24/01/2020
10.1 [10.001] / 7
20. Engine - Engine and crankcase
16. Remove the fuel line.
BAIL14TR00941AB 16
17. 1. Disconnect the electrical connector (1).
2. Detach the wiring harness (2) from the bracket.
3. Remove the bracket.
BAIL14TR00943AB 17
18. Disconnect the A/C compressor high pressure pipe
and position it to one side.
BAIL14TR00970AB 18
19. Disconnect the water-in-fuel electrical connector.
BAIL14TR00948AB 19
51666758 24/01/2020
10.1 [10.001] / 8
21. Engine - Engine and crankcase
20. Disconnect the differential lock supply pipe.
BAIL14TR00949AB 20
21. 1. Disconnect the in-line electrical connector.
2. Detach the wiring harness from the clip.
3. Cut the cable tie.
NOTICE: Seal all openings using clean blanking plugs.
BAIL14TR00950AB 21
22. 1. Disconnect the in-line electrical connector.
2. Detach the wiring harness from the clip.
BAIL14TR00952AB 22
23. 1. Disconnect the intake air temperature (IAT) sen-
sor electrical connector.
2. Disconnect the air cleaner sensor electrical con-
nectors.
BAIL14TR00971AB 23
51666758 24/01/2020
10.1 [10.001] / 9
22. Engine - Engine and crankcase
24. Disconnect the DEF/ADBLUE® dosing module electri-
cal connector.
BAIL14TR00954AB 24
25. Disconnect the nitrogen oxide (NOx) module electrical
connector.
BAIL14TR00972AB 25
26. 1. Detach the wiring harness from the clips.
2. Disconnect the in-line electrical connector.
BAIL14TR00964AB 26
27. Detach the engine emission filter.
A. Disconnect the engine emission hose (1) from the
bottom of the engine emission filter.
B. Remove the engine emission filter retaining bolts
(2).
C. Detach the engine emission hose (3) from the
retaining clip.
BAIL14TR00973AC 27
51666758 24/01/2020
10.1 [10.001] / 10
23. Engine - Engine and crankcase
28. • Disconnect the coolant expansion tank lower hose.
• Disconnect the exhaust flap coolant hose.
• Disconnect the turbocharger air intake tube.
BAIL14TR00974AB 28
29. 1. Disconnect the coolant line from the DEF/
ADBLUE® dosing module.
2. Disconnect the DEF/ADBLUE® lines from the
DEF/ADBLUE® dosing module.
BAIL14TR00975AB 29
30. Remove the air cleaner frame retaining bolts.
BAIL14TR00976AB 30
31. With the aid of another technician, remove the air
cleaner frame.
BAIL14TR00986AB 31
51666758 24/01/2020
10.1 [10.001] / 11
24. Engine - Engine and crankcase
32. Remove the DEF/ADBLUE® lines.
BAIL14TR00977AB 32
33. 1. Disconnect the turbocharger oil pipes.
2. Disconnect the turbocharger electrical connector.
3.
BAIL14TR00978AB 33
34. 1. Disconnect the exhaust flap to turbocharger
clamp.
2. Remove the turbocharger mounting bracket re-
taining bolts.
BAIL14TR00987AB 34
35. 1. Remove the engine upper frame retaining bolt.
2. Remove the engine upper frame retaining nuts.
BAIL14TR00988AB 35
51666758 24/01/2020
10.1 [10.001] / 12
25. Engine - Engine and crankcase
36. 1. Remove the engine upper frame retaining bolt.
2. Remove the engine upper frame retaining bolts.
3. Remove the engine upper frame retaining nuts.
BAIL14TR00989AB 36
37. Remove the engine upper frame retaining bolts.
BAIL14TR00990AB 37
38. Using suitable lifting equipment, remove the engine
upper frame and diesel oxidation catalyst (DOC) as-
sembly.
BAIL15TR00019AA 38
39. Remove the fuel line from the rear of the cylinder
head.
BAIL15TR00020AA 39
51666758 24/01/2020
10.1 [10.001] / 13
26. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
27. Engine - Engine and crankcase
40. Detach the grid heater relay and position it to one side.
BAIL15TR00021AA 40
41. Remove the engine rear frame right-hand side retain-
ing bolts.
BAIL15TR00022AA 41
42. Remove the engine rear frame.
BAIL15TR00023AA 42
43. Disconnect the steering motor pipes.
BAIL15TR00024AA 43
51666758 24/01/2020
10.1 [10.001] / 14
28. Engine - Engine and crankcase
44. Install three engine lifting eyes 380200013.
BAIL07APH141BVA 44
45. Remove the engine to transmission lower inner retain-
ing bolts.
BAIL14TR00968AB 45
46. Remove the engine to transmission lower outer retain-
ing bolts.
BAIL14TR00969AB 46
51666758 24/01/2020
10.1 [10.001] / 15