This document is a service manual for T4020, T4030, T4040, and T4050 tractor models. It contains sections on general guidelines, the engine, clutch, transmissions, drive lines, front and rear mechanical transmissions, power take-off, brakes, hydraulic systems, steering, axles and wheels, cab air conditioning, electrical systems, and the platform, cab and bodywork. Each section includes data, specifications, diagrams, removal and installation instructions, and fault finding information for the various components.
Mc cormick fxl techno tier 3 (2008 2009) - rp54 - f 105 gexl tractor service ...fjsjekkmdmme
This document contains parts listings and technical specifications for engine components. It includes identification numbers, quantities, replacement kits, and notes for various parts like cylinders, pistons, gears, valves, and other internal engine pieces. Measurements and tolerances are provided for wear specifications. References are made to other part numbers for related components.
Mc cormick fxl techno tier 3 (2008 2009) - rp54 - f 100 gexl tractor service ...fjsjekkmdmme
This document contains parts information for an engine, including:
1. Component names, part numbers, quantities and reference numbers.
2. Identification information for the engine model and OEM.
3. Notes on replacement parts, reference numbers, quantities for tractors sold, and color coding.
Mc cormick fxl techno tier 3 (2008 2009) - rp54 - f 80 gexl tractor service r...fjsjekkmdmme
This document provides component part listings and information for an engine. It lists individual part numbers, part names, applicable serial number ranges, replacement part numbers, and other technical specifications over multiple pages of documentation.
Mc cormick fxl techno tier 3 (2008 2009) - rp54 - f 75 ge tractor service rep...fjsjekkmdmme
This document provides information on components for an engine. It lists 40 individual components, including cylinders, pistons, gears, shafts, plates, and other parts. Each component includes details like the part number, quantity needed, and reference numbers. The document also indicates that some components are part of larger assemblies and provides replacement part information.
Mc cormick fxl techno tier 2 (2003 2008) - rp52 - f105 fgexl tractor service ...fjsjekkmdmme
This document contains information about engine part replacements and repair kits. It lists part numbers, descriptions, and whether they are for overhaul or replacement. It provides technical information for engines, including serial number ranges that parts are applicable for. It also includes quantity information for parts included in kits.
Mc cormick fxl techno tier 2 (2003 2008) - rp52 - f85 fgexl tractor service r...fjsjekkmdmme
This document contains parts listings and repair instructions for engine components. It includes listings of parts needed for repairs or replacements, identifying information for each part like part numbers and names, quantities needed, and repair steps or kits associated with each part. Tasks identified include repairs, overhauls, replacements, and timing specifications.
Mc cormick fxl techno tier 2 (2003 2008) - rp52 - f80 fge tractor service rep...fjsjekkmdmme
This document contains information about engine parts including identification numbers, descriptions, and repair specifications. It lists parts needed for overhauls, replacements, and repairs of engine components like cylinders, crankshafts, heads, valves, pistons, gears, and other internal engine parts. Specifications include torque settings, fit tolerances, and serial number ranges for applicability of certain parts.
Mc cormick fxl techno tier 2 (2003 2008) - rp52 - f75 fgexl tractor service r...fjsjekkmdmme
This document contains parts lists and repair instructions for engine components. It lists individual part numbers, descriptions, quantities, and repair times for replacing or overhauling parts like pistons, rods, bearings, gaskets, valves, pumps, and more. Each part is identified by its number and specifications are provided for replacement parts that may vary by size.
Mc cormick fxl techno tier 3 (2008 2009) - rp54 - f 105 gexl tractor service ...fjsjekkmdmme
This document contains parts listings and technical specifications for engine components. It includes identification numbers, quantities, replacement kits, and notes for various parts like cylinders, pistons, gears, valves, and other internal engine pieces. Measurements and tolerances are provided for wear specifications. References are made to other part numbers for related components.
Mc cormick fxl techno tier 3 (2008 2009) - rp54 - f 100 gexl tractor service ...fjsjekkmdmme
This document contains parts information for an engine, including:
1. Component names, part numbers, quantities and reference numbers.
2. Identification information for the engine model and OEM.
3. Notes on replacement parts, reference numbers, quantities for tractors sold, and color coding.
Mc cormick fxl techno tier 3 (2008 2009) - rp54 - f 80 gexl tractor service r...fjsjekkmdmme
This document provides component part listings and information for an engine. It lists individual part numbers, part names, applicable serial number ranges, replacement part numbers, and other technical specifications over multiple pages of documentation.
Mc cormick fxl techno tier 3 (2008 2009) - rp54 - f 75 ge tractor service rep...fjsjekkmdmme
This document provides information on components for an engine. It lists 40 individual components, including cylinders, pistons, gears, shafts, plates, and other parts. Each component includes details like the part number, quantity needed, and reference numbers. The document also indicates that some components are part of larger assemblies and provides replacement part information.
Mc cormick fxl techno tier 2 (2003 2008) - rp52 - f105 fgexl tractor service ...fjsjekkmdmme
This document contains information about engine part replacements and repair kits. It lists part numbers, descriptions, and whether they are for overhaul or replacement. It provides technical information for engines, including serial number ranges that parts are applicable for. It also includes quantity information for parts included in kits.
Mc cormick fxl techno tier 2 (2003 2008) - rp52 - f85 fgexl tractor service r...fjsjekkmdmme
This document contains parts listings and repair instructions for engine components. It includes listings of parts needed for repairs or replacements, identifying information for each part like part numbers and names, quantities needed, and repair steps or kits associated with each part. Tasks identified include repairs, overhauls, replacements, and timing specifications.
Mc cormick fxl techno tier 2 (2003 2008) - rp52 - f80 fge tractor service rep...fjsjekkmdmme
This document contains information about engine parts including identification numbers, descriptions, and repair specifications. It lists parts needed for overhauls, replacements, and repairs of engine components like cylinders, crankshafts, heads, valves, pistons, gears, and other internal engine parts. Specifications include torque settings, fit tolerances, and serial number ranges for applicability of certain parts.
Mc cormick fxl techno tier 2 (2003 2008) - rp52 - f75 fgexl tractor service r...fjsjekkmdmme
This document contains parts lists and repair instructions for engine components. It lists individual part numbers, descriptions, quantities, and repair times for replacing or overhauling parts like pistons, rods, bearings, gaskets, valves, pumps, and more. Each part is identified by its number and specifications are provided for replacement parts that may vary by size.
Mc cormick fxl techno tier 2 (2003 2008) - rp52 - f70 fge tractor service rep...fjsjekkmdmme
This document contains parts lists and repair instructions for engines. It lists individual engine parts along with relevant repair times for tasks like replacement, overhaul, and more. Parts are identified with reference numbers and include details like kits, bushings, gears, plugs, and other engine components. Technician and repair times are provided for each task.
Mc cormick f top restyling (2010 ) - rp55 - f100gexl tractor service repair ...fjsjekkmdmme
This document provides parts information for various engine components. It lists part numbers, descriptions, applicable serial number ranges, and other technical specifications for items like pistons, connecting rods, cylinder heads, pumps, sensors and housing parts. It indicates that some components are part of larger assemblies and notes replacement part designations or color coding for organized replacement.
Komatsu h185 s hydraulic shovel service repair manual (sn 6111)fjsjekkmdmme
This shop manual provides proprietary information for maintaining and repairing the Komatsu H185S hydraulic shovel. It describes the continuous improvement process used by Komatsu to update their products and documentation. Users are advised to check with their distributor for the latest revision of the manual, as revisions may be made without notice due to Komatsu's ongoing research and development efforts.
Komatsu d575 a 2 dozer bulldozer service repair manual (sn 10001 and up)fjsjekkmdmme
This shop manual provides information for servicing and repairing the D575A-2 machine model. The manual contains safety precautions and general procedures for removal and installation of components. Key points include:
- The D575A-2 uses the SA12V170-1 engine which is detailed in the 12V170-1 Series Engine Shop Manual.
- Safety precautions must always be followed when servicing equipment to prevent injury.
- Procedures are provided for removal and installation of components like the power train oil cooler, hydraulic cooler, fuel injection pump, water pump, turbocharger, and cylinder head.
- Components should be installed in reverse order of removal and fluids refilled
Komatsu d475 a 2 dozer bulldozer service repair manual (sn 10201 and up)fjsjekkmdmme
The document provides instructions for removing and installing various components of an excavator. It describes removing the torque converter cooler assembly which includes disconnecting tubes and hoses, draining oil, and removing mounting bolts. It also describes installing the assembly in reverse order and refilling with oil. Similarly, it provides removal and installation instructions for other assemblies like the fuel injection pump, water pump, turbocharger, and cylinder head.
Komatsu d65 wx 16 dozer bulldozer service repair manual sn 80001 and upfjsjekkmdmme
The document is a shop manual that provides specifications, maintenance procedures, and troubleshooting information for Bulldozer models D65EX-16, D65PX-16, and D65WX-16. It contains sections on the engine and cooling system, power train, undercarriage, hydraulic system, electrical system, and troubleshooting codes. Tables provide the serial numbers, specifications, weights, fluids, and tightening torques. The manual also includes maintenance standards, safety notices, and testing and adjusting procedures.
Komatsu d65 wx 15e0 dozer bulldozer service repair manual sn 69001 and upfjsjekkmdmme
This document provides specifications and service information for Bulldozer models D65EX-15E0, D65PX-15E0, and D65WX-15E0, including serial numbers 69001 and up. It contains sections on specifications, structure and function, maintenance standards, testing and adjusting procedures, and troubleshooting. The document is organized into multiple sections covering various systems of the bulldozers.
Komatsu d65 px 16 dozer bulldozer service repair manual sn 80001 and upfjsjekkmdmme
This document provides specifications, maintenance procedures, and troubleshooting information for Bulldozer models D65EX-16, D65PX-16, and D65WX-16. It includes sections on engine and cooling systems, power train, undercarriage, hydraulic systems, electrical systems, and work equipment. Troubleshooting tables provide possible causes and solutions for various error codes related to transmission components, sensors, engine controls, and electrical circuits.
Komatsu d65 px 15e0 dozer bulldozer service repair manual sn 69001 and upfjsjekkmdmme
This document provides specifications and maintenance information for Bulldozer models D65EX, D65PX, and D65WX-15E0. It includes sections on specifications, structure and function, maintenance standards, testing and adjusting procedures, and troubleshooting. Serial numbers for the models start at 69001. The document contains diagrams, specifications, technical data, and instructions for servicing and repairing components of the bulldozers.
Komatsu d65 px 12 dozer bulldozer service repair manual sn 65275 and upfjsjekkmdmme
This shop manual provides instructions for servicing a Komatsu D65EX/PX-12 excavator. It contains sections on general information, structure and function, testing and adjusting, disassembly and assembly, maintenance standards, and other topics. Safety precautions are emphasized, including wearing protective equipment and blocking the excavator before performing any work. The document provides step-by-step instructions for removing and installing components like the fuel supply pump assembly and nozzle holder assembly. Tightening torques are specified for all fasteners.
Komatsu d65 ex 16 dozer bulldozer service repair manual sn 80001 and upfjsjekkmdmme
The document is a shop manual that provides specifications, maintenance procedures, and troubleshooting information for Bulldozer models D65EX-16, D65PX-16, and D65WX-16. It contains sections on the engine and cooling system, power train, undercarriage, hydraulic system, electrical system, and troubleshooting. Tables provide the serial numbers, specifications, maintenance standards, tightening torques, and failure codes. The manual also includes diagrams of systems and components.
Komatsu d65 ex 15e0 dozer bulldozer service repair manual sn 69001 and upfjsjekkmdmme
This document provides specifications and maintenance information for Bulldozer models D65EX, D65PX, and D65WX-15E0. It includes sections on specifications, structure and function, maintenance standards, testing and adjusting procedures, and troubleshooting. Serial numbers for the models start at 69001. The document contains diagrams, specifications, technical data, and instructions for servicing and repairing components of the bulldozers.
Komatsu d65 ex 12 dozer bulldozer service repair manual sn 65209 and upfjsjekkmdmme
This shop manual provides instructions for servicing a Komatsu D65EX/PX-12 excavator. It contains sections on general information, structure and function, testing and adjusting, disassembly and assembly, maintenance standards, and other topics. Safety precautions are emphasized, including wearing protective equipment and blocking the excavator before performing any work. The document provides step-by-step instructions for removing and installing components like the fuel supply pump assembly and nozzle holder assembly. Tightening torques are specified for all fasteners.
John deere 6200 tractors service repair technical manual (tm4523)fjsjekkmdmme
The document provides instructions for assembling and disassembling components of the creeper transmission and range transmission for Deere tractors. It includes details on installing snap rings, gears, bearings, and other parts. Specifications are also provided for measurements and torque values.
John deere 6200 tractors service repair technical manual (tm4493)fjsjekkmdmme
1. The document provides instructions for adjusting the cone point on tractors from models 6100 to 6600. It involves measuring specific dimensions, calculating the required spacer washer thickness, and selecting the appropriate washers.
2. The instructions also provide details on assembling the transmission, including pressing in bearings, installing gears and synchronizers, and checking gear backlash.
3. Special tools required for tasks like tilting the cab, supporting the tractor, and removing PTO components are also listed.
John deere 6130 d (tier 0 tier 3stage iiia) tractors service repair technic...fjsjekkmdmme
The document provides instructions for removing and installing a final drive assembly on a tractor. It involves draining the oil, removing mounting hardware, using lifting equipment to remove the assembly, cleaning mating surfaces, applying sealant, and reinstalling the assembly. The process is reversed to install the final drive assembly, ensuring proper torque specifications are followed.
John deere 6125 d (tier 0 tier 3stage iiia) tractors service repair technic...fjsjekkmdmme
The document provides instructions for removing and installing a final drive assembly on a tractor. It involves draining the oil, removing mounting hardware, using lifting equipment to remove the assembly, cleaning mating surfaces, applying sealant, and reinstalling the assembly. The process is reversed to install the final drive assembly, ensuring proper torque specifications are followed.
John deere 6115 d (tier 0 tier 3stage iiia) tractors service repair technic...fjsjekkmdmme
The document provides instructions for removing and installing a final drive assembly on a tractor. It involves draining the oil, removing mounting hardware, using lifting eyes to remove the assembly, cleaning mating surfaces, applying sealant, and reinstalling with new hardware. The process is reversed to install the final drive assembly. Proper torque specifications are listed for fasteners.
John deere 6110 d (tier 0 tier 3stage iiia) tractors service repair technic...fjsjekkmdmme
The document provides instructions for removing and installing a final drive assembly on a tractor. It involves draining the oil, removing mounting hardware, using lifting equipment to remove the assembly, cleaning mating surfaces, applying sealant, and reinstalling the assembly. The process is reversed to install the final drive assembly, ensuring proper torque specifications are followed.
John deere 6100 d (tier 0 tier 3stage iiia) tractors service repair technic...fjsjekkmdmme
The document provides instructions for removing and installing a final drive assembly on a tractor. It involves draining the oil, removing mounting hardware, using lifting equipment to remove the assembly, cleaning mating surfaces, applying sealant, and reinstalling the assembly. The process is reversed to install the final drive assembly, ensuring proper torque specifications are followed.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Mc cormick fxl techno tier 2 (2003 2008) - rp52 - f70 fge tractor service rep...fjsjekkmdmme
This document contains parts lists and repair instructions for engines. It lists individual engine parts along with relevant repair times for tasks like replacement, overhaul, and more. Parts are identified with reference numbers and include details like kits, bushings, gears, plugs, and other engine components. Technician and repair times are provided for each task.
Mc cormick f top restyling (2010 ) - rp55 - f100gexl tractor service repair ...fjsjekkmdmme
This document provides parts information for various engine components. It lists part numbers, descriptions, applicable serial number ranges, and other technical specifications for items like pistons, connecting rods, cylinder heads, pumps, sensors and housing parts. It indicates that some components are part of larger assemblies and notes replacement part designations or color coding for organized replacement.
Komatsu h185 s hydraulic shovel service repair manual (sn 6111)fjsjekkmdmme
This shop manual provides proprietary information for maintaining and repairing the Komatsu H185S hydraulic shovel. It describes the continuous improvement process used by Komatsu to update their products and documentation. Users are advised to check with their distributor for the latest revision of the manual, as revisions may be made without notice due to Komatsu's ongoing research and development efforts.
Komatsu d575 a 2 dozer bulldozer service repair manual (sn 10001 and up)fjsjekkmdmme
This shop manual provides information for servicing and repairing the D575A-2 machine model. The manual contains safety precautions and general procedures for removal and installation of components. Key points include:
- The D575A-2 uses the SA12V170-1 engine which is detailed in the 12V170-1 Series Engine Shop Manual.
- Safety precautions must always be followed when servicing equipment to prevent injury.
- Procedures are provided for removal and installation of components like the power train oil cooler, hydraulic cooler, fuel injection pump, water pump, turbocharger, and cylinder head.
- Components should be installed in reverse order of removal and fluids refilled
Komatsu d475 a 2 dozer bulldozer service repair manual (sn 10201 and up)fjsjekkmdmme
The document provides instructions for removing and installing various components of an excavator. It describes removing the torque converter cooler assembly which includes disconnecting tubes and hoses, draining oil, and removing mounting bolts. It also describes installing the assembly in reverse order and refilling with oil. Similarly, it provides removal and installation instructions for other assemblies like the fuel injection pump, water pump, turbocharger, and cylinder head.
Komatsu d65 wx 16 dozer bulldozer service repair manual sn 80001 and upfjsjekkmdmme
The document is a shop manual that provides specifications, maintenance procedures, and troubleshooting information for Bulldozer models D65EX-16, D65PX-16, and D65WX-16. It contains sections on the engine and cooling system, power train, undercarriage, hydraulic system, electrical system, and troubleshooting codes. Tables provide the serial numbers, specifications, weights, fluids, and tightening torques. The manual also includes maintenance standards, safety notices, and testing and adjusting procedures.
Komatsu d65 wx 15e0 dozer bulldozer service repair manual sn 69001 and upfjsjekkmdmme
This document provides specifications and service information for Bulldozer models D65EX-15E0, D65PX-15E0, and D65WX-15E0, including serial numbers 69001 and up. It contains sections on specifications, structure and function, maintenance standards, testing and adjusting procedures, and troubleshooting. The document is organized into multiple sections covering various systems of the bulldozers.
Komatsu d65 px 16 dozer bulldozer service repair manual sn 80001 and upfjsjekkmdmme
This document provides specifications, maintenance procedures, and troubleshooting information for Bulldozer models D65EX-16, D65PX-16, and D65WX-16. It includes sections on engine and cooling systems, power train, undercarriage, hydraulic systems, electrical systems, and work equipment. Troubleshooting tables provide possible causes and solutions for various error codes related to transmission components, sensors, engine controls, and electrical circuits.
Komatsu d65 px 15e0 dozer bulldozer service repair manual sn 69001 and upfjsjekkmdmme
This document provides specifications and maintenance information for Bulldozer models D65EX, D65PX, and D65WX-15E0. It includes sections on specifications, structure and function, maintenance standards, testing and adjusting procedures, and troubleshooting. Serial numbers for the models start at 69001. The document contains diagrams, specifications, technical data, and instructions for servicing and repairing components of the bulldozers.
Komatsu d65 px 12 dozer bulldozer service repair manual sn 65275 and upfjsjekkmdmme
This shop manual provides instructions for servicing a Komatsu D65EX/PX-12 excavator. It contains sections on general information, structure and function, testing and adjusting, disassembly and assembly, maintenance standards, and other topics. Safety precautions are emphasized, including wearing protective equipment and blocking the excavator before performing any work. The document provides step-by-step instructions for removing and installing components like the fuel supply pump assembly and nozzle holder assembly. Tightening torques are specified for all fasteners.
Komatsu d65 ex 16 dozer bulldozer service repair manual sn 80001 and upfjsjekkmdmme
The document is a shop manual that provides specifications, maintenance procedures, and troubleshooting information for Bulldozer models D65EX-16, D65PX-16, and D65WX-16. It contains sections on the engine and cooling system, power train, undercarriage, hydraulic system, electrical system, and troubleshooting. Tables provide the serial numbers, specifications, maintenance standards, tightening torques, and failure codes. The manual also includes diagrams of systems and components.
Komatsu d65 ex 15e0 dozer bulldozer service repair manual sn 69001 and upfjsjekkmdmme
This document provides specifications and maintenance information for Bulldozer models D65EX, D65PX, and D65WX-15E0. It includes sections on specifications, structure and function, maintenance standards, testing and adjusting procedures, and troubleshooting. Serial numbers for the models start at 69001. The document contains diagrams, specifications, technical data, and instructions for servicing and repairing components of the bulldozers.
Komatsu d65 ex 12 dozer bulldozer service repair manual sn 65209 and upfjsjekkmdmme
This shop manual provides instructions for servicing a Komatsu D65EX/PX-12 excavator. It contains sections on general information, structure and function, testing and adjusting, disassembly and assembly, maintenance standards, and other topics. Safety precautions are emphasized, including wearing protective equipment and blocking the excavator before performing any work. The document provides step-by-step instructions for removing and installing components like the fuel supply pump assembly and nozzle holder assembly. Tightening torques are specified for all fasteners.
John deere 6200 tractors service repair technical manual (tm4523)fjsjekkmdmme
The document provides instructions for assembling and disassembling components of the creeper transmission and range transmission for Deere tractors. It includes details on installing snap rings, gears, bearings, and other parts. Specifications are also provided for measurements and torque values.
John deere 6200 tractors service repair technical manual (tm4493)fjsjekkmdmme
1. The document provides instructions for adjusting the cone point on tractors from models 6100 to 6600. It involves measuring specific dimensions, calculating the required spacer washer thickness, and selecting the appropriate washers.
2. The instructions also provide details on assembling the transmission, including pressing in bearings, installing gears and synchronizers, and checking gear backlash.
3. Special tools required for tasks like tilting the cab, supporting the tractor, and removing PTO components are also listed.
John deere 6130 d (tier 0 tier 3stage iiia) tractors service repair technic...fjsjekkmdmme
The document provides instructions for removing and installing a final drive assembly on a tractor. It involves draining the oil, removing mounting hardware, using lifting equipment to remove the assembly, cleaning mating surfaces, applying sealant, and reinstalling the assembly. The process is reversed to install the final drive assembly, ensuring proper torque specifications are followed.
John deere 6125 d (tier 0 tier 3stage iiia) tractors service repair technic...fjsjekkmdmme
The document provides instructions for removing and installing a final drive assembly on a tractor. It involves draining the oil, removing mounting hardware, using lifting equipment to remove the assembly, cleaning mating surfaces, applying sealant, and reinstalling the assembly. The process is reversed to install the final drive assembly, ensuring proper torque specifications are followed.
John deere 6115 d (tier 0 tier 3stage iiia) tractors service repair technic...fjsjekkmdmme
The document provides instructions for removing and installing a final drive assembly on a tractor. It involves draining the oil, removing mounting hardware, using lifting eyes to remove the assembly, cleaning mating surfaces, applying sealant, and reinstalling with new hardware. The process is reversed to install the final drive assembly. Proper torque specifications are listed for fasteners.
John deere 6110 d (tier 0 tier 3stage iiia) tractors service repair technic...fjsjekkmdmme
The document provides instructions for removing and installing a final drive assembly on a tractor. It involves draining the oil, removing mounting hardware, using lifting equipment to remove the assembly, cleaning mating surfaces, applying sealant, and reinstalling the assembly. The process is reversed to install the final drive assembly, ensuring proper torque specifications are followed.
John deere 6100 d (tier 0 tier 3stage iiia) tractors service repair technic...fjsjekkmdmme
The document provides instructions for removing and installing a final drive assembly on a tractor. It involves draining the oil, removing mounting hardware, using lifting equipment to remove the assembly, cleaning mating surfaces, applying sealant, and reinstalling the assembly. The process is reversed to install the final drive assembly, ensuring proper torque specifications are followed.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
11. SECTION 00 -
- GENERAL -
- CHAPTER 1 1
87666787A -
- 11 -
- 2007
GENERAL INSTRUCTIONS
IMPORTANT NOTICE
All maintenance and repair work described in this manual must be performed exclusively by NEW HOLLAND
service technicians, in strict accordance with the instructions given and using any specific tools necessary.
Anyone performing the operations described herein without strictly following the instructions is personally
responsible for any eventual injury or damage to property.
BATTERY
Before carrying out any kind of service operation disconnect and isolate the battery negative lead, unless
otherwise requested for specific operations (e.g.: operations that require the engine running). Once the specific
operation has been completed, disconnect the lead in order to complete the operation.
SHIMMING
For each adjustment operation, select adjusting shims and measure individually using a micrometer, then add
up the recorder values: Do not rely on measuring the entire shimming set, which may be incorrect, or the rated
value indicated for each on shim.
ROTATING SHAFT SEALS
For correct rotating shaft seal installation, proceed as follows:
-- before assembly, allow the seal to soak in the oil it will be sealing for at least thirty minutes;
-- thoroughly clean the shaft and check that the working surface on the shaft is not damaged;
-- position the sealing lip facing the fluid; with hydrodynamic lips, take into consideration the shaft rotation
direction and position the grooves so that they will deviate the fluid towards the inner side of the seal;
-- smear the sealing lip with a thin layer of lubricant (use oil rather than grease) and fill the gap between the
sealing lip and the dust lip on double lip seals with grease;
-- insert the seal in its seat and press down using a flat punch; do not tap the seal with a hammer or mallet;
-- whilst inserting the seal, check that the it is perpendicular to the seat; once settled, make sure that it makes
contact with the thrust element, if required;
-- to prevent damaging the seal lip on the shaft, position a protective guard during installation operations.
O-
-RING SEALS
Lubricate the O--RING seals before inserting them in the seats, this will prevent them from overturning and
twisting, which would jeopardise sealing efficiency.
SEALING COMPOUNDS
Apply one of the following sealing compounds on the mating surfaces marked with an X: RTV SILMATE,
RHODORSIL CAF 1 or LOCTITE PLASTIC GASKET.
Before applying the sealing compound, prepare the surfaces as follows:
-- remove any incrustations using a wire brush;
-- thoroughly de--grease the surfaces using one of the following cleaning agents: trichlorethylene, petrol or a
water and soda solution.
BEARINGS
When installing bearings it is advised to:
-- heat the bearings to 80 ÷ 90 0C before fitting on the shafts;
-- allow the bearings to cool before installing them from the outside.
12. 2 SECTION 00 -
- GENERAL -
- CHAPTER 1
87666787A -
- 11 -
- 2007
SPRING PINS
When fitting split socket elastic pins, ensure that the pin notch is positioned in the direction of the force required
to stress the pin.
Spiral spring pins do not require special positioning
SPARE PARTS
Use genuine parts only.
Only genuine spare parts guarantee the same quality, duration and safety as they are the same parts that are
assembled during production.
Only genuine parts can offer this guarantee.
When ordering spare parts, always provide the following information:
-- tractor model (commercial name) and frame number;
-- engine type and number;
-- part number of the ordered part, which can be found in the ”Microfiches” or the ”Spare Parts Catalogue”, used
for order processing.
NOTES FOR EQUIPMENT
The tools that NEW HOLLAND propose and illustrate in this manual are:
-- specifically researched and designed for use with NEW HOLLAND vehicles;
-- necessary to make reliable repair;
-- accurately built and strictly tested to offer efficient and long--lasting working means.
By using these tools, repair personnel will benefit from:
-- operating in optimal technical conditions;
-- obtaining the best results;
-- saving time and effort;
-- working in safe conditions.
IMPORTANT NOTES
Wear limit values indicated for certain parts are recommended, but not binding. The terms ”front”, ”rear”,
”right--hand” and ”left--hand” (when referred to different parts) are intended as seen from the driving position with
the tractor in the normal direction of movement.
MOVING THE TRACTOR WITH THE BATTERY REMOVED
External power supply cables should only be connected to the respective positive and negative cable terminals,
using efficient clamps that guarantee adequate and secure contact.
Disconnect all services (lights, windshield wipers, etc.) before starting the vehicle.
If the vehicle electrical system requires checking, carry out operations with the power supply connected; once
checking is completed, disconnect all services and switch off the power supply before disconnecting the cables.
13. SECTION 00 -
- GENERAL -
- CHAPTER 1 3
87666787A -
- 11 -
- 2007
SAFETY REGULATIONS
WARNING AND DANGER SYMBOL
This warning symbol points out important messages
concerning your safety.
Carefully read the following safety regulations and
observe advised precautions in order to avoid
potential hazards and safeguard your health and
safety.
In this manual the symbol is accompanied by the
following key-
-words:
WARNING -
- Warnings concerning unsuitable repair
operations that may jeopardise the safety of Repair
personnel.
DANGER -
- Specific warnings concerning potential
hazards for operator safety or for other persons
directly or indirectly involved.
TO PREVENT ACCIDENTS
Most accidents or injuries that occur in workshops
are the result of non--observance of simple and
fundamental safety regulations. For this reason, IN
MOST CASES THESE ACCIDENTS CAN BE
AVOIDED: by foreseeing possible causes and
consequently acting with the necessary caution and
care.
Accidents may occur with all types of vehicle,
regardless of how well it was designed and built.
A careful and judicious service technician is the best
guarantee against accidents.
Precise observance of the most basic safety rule is
normally sufficient to avoid many serious accidents.
DANGER. Never carry out any cleaning, lubrication
or maintenance operations when the engine is
running.
SAFETY REGULATIONS
GENERAL
-- Carefully follow specified repair and
maintenance procedures.
-- Do not wear rings, wristwatches, jewellery,
unbuttoned or loose articles of clothing such as:
ties, torn clothing, scarves, open jackets or shirts
with open zips that may remain entangled in
moving parts. It is advised to wear approved
safety clothing, e.g.: non--slip footwear, gloves,
safety goggles, helmets, etc.
1
-- Do not carry out repair operations with someone
sitting in the driver’s seat, unless the person is a
trained technician who is assisting with the
operation in question.
-- Do not operate the vehicle or use any of the
implements from different positions, other than
the driver’s seat.
-- Do not carry out operations on the vehicle with
the engine running, unless specifically indicated.
-- Stop the engine and ensure that all pressure is
relieved from hydraulic circuits before removing
caps, covers, valves, etc.
-- All repair and maintenance operations must be
carried out using extreme care and attention.
-- Service steps and platforms used in a workshop
or in the field should be built in compliance with
the safety rules in force.
-- Disconnect the batteries and label all controls to
indicate that the vehicle is being serviced. Block
the machine and all equipment which should be
raised.
-- Do not check or fill fuel tanks, accumulator
batteries, nor use starting liquid when smoking or
near naked flames, as these fluids are
inflammable.
-- Brakes are inoperative when manually released
for repair or maintenance purposes: Use blocks
or similar devices to control the machine in these
conditions.
-- The fuel nozzle should always be in contact with
the filling aperture: Maintain this contact until the
fuel stops flowing into the tank to avoid possible
sparks due to static electricity build--up.
16. 22 SECTION 10 -
- ENGINE -
- CHAPTER 1
87666787A -
- 11 -
- 2007
Op. 10 001 10
ENGINE Removal-
-Installation
DANGER
Lift and handle all heavy parts using suitable lifting
equipment.
Make sure that assemblies or parts are supported by
means of suitable slings and hooks. Ensure that
no--one is in the vicinity of the load to be lifted.
ATTENTION
Use suitable tools to align the holes. NEVER USE
FINGERS OR HANDS.
1. Remove the bonnet as described in operation
90 100 22.
2. Extract the fixing pin and remove the ballast (1);
unscrew the retaining screws and retrieve the
ballast support (2).
6
3. If the tractor is a T4040 Supersteer or T4050
Supersteer model, position and secure the
bracket 380001613 (1) together with the spacers
50162 (4) on the front axle (3) and associated
support (2).
7
4. Unscrew the retaining bolts and remove the side
grille (1).
Perform this operation on the other side of the
tractor too.
8
17. SECTION 10 -
- ENGINE -
- CHAPTER 1 23
87666787A -
- 11 -
- 2007
5. Unscrew the related retaining bolt and loosen the
guide (1), unhook the catch and take out the
condenser (2).
9
6. Disconnect the electrical connection from the
compressor (1) and unscrew the related
retaining bolts.
Remove the brackets fixing the pipes of the air
conditioning system and take the condenser,
compressor and pipes under the transmission
without disconnecting the pipes.
10
7. Unscrew the bolts (3) securing the exhaust pipe
(1), unscrew the exhaust silencer retaining bolts
(2) and remove the entire assembly.
Unscrew the retaining bolts and remove the heat
shield.
11
8. Remove the guard (1) and disconnect the cables
from the starter motor (2).
12
18. 24 SECTION 10 -
- ENGINE -
- CHAPTER 1
87666787A -
- 11 -
- 2007
9. Disconnect the pipes (1) of the cab heating
system and drain the engine cooling system.
13
10. Unscrew the plug and drain the oil from the rear
transmission casing (the prescribed quantity is
42 litres).
25628
14
11. Disconnect the power steering pipes (2),
unscrew the related retaining bolts and remove
the bracket (1).
15
12. Disconnect the electrical connection from the
brake fluid reservoir (1), unscrew the retaining
bolts and remove the reservoir from the
supporting bracket.
16
19. SECTION 10 -
- ENGINE -
- CHAPTER 1 25
87666787A -
- 11 -
- 2007
13. Unscrew the retaining bolts and remove the
bonnet bracket (1).
17
14. Disconnect: the main electrical connections (1),
the connection of the steering sensor and thecab
ground, disconnect the throttle cable (2) from the
injection pump.
18
15. Disconnect the diesel pipes (1) from the injection
pump.
Disconnect the pipe (2) from the pump.
19
16. Disconnect: the transmission oil cooler pipes (1)
and the front axle differential lock pipe (2).
20
20. 26 SECTION 10 -
- ENGINE -
- CHAPTER 1
87666787A -
- 11 -
- 2007
17. If the tractor is a T4040 Supersteer or T4050
Supersteer model, unscrew the front and rear
retaining bolts, unscrew the front pivot pin
retaining screw and remove the bracket (1).
Unscrew the relative retaining bolts and remove
the rear guard.
21
18. If the tractor is a T4040 Deluxe or T4050 Deluxe
model, unscrew the front, central and rear
retaining bolts and remove the guard on the
propeller shafts (1).
27801
22
19. Remove the circlip (2) and move the front sleeve
(1) backwards in order to free it from the groove
on the front axle.
25647
1 2
23
20. Remove the circlip (2) and move the rear sleeve
(1) in order to release it from the groove on the
drive.
1 2
25646
24
21. SECTION 10 -
- ENGINE -
- CHAPTER 1 27
87666787A -
- 11 -
- 2007
21. Remove the propeller shaft central support (1)
retaining bolts and extract the shaft together with
the support.
25648
1
25
22. Loosen the retaining bolt and turn the bracket (1)
through 90°.
26
23. For models fitted with brakes on the front axle it
is necessary to drain the brake fluid tank and
disconnect the pipes (1, 2 and 3) from the block.
27
24. Unscrew: the retaining bolts of the pipe (1)
delivering oil to the pump and the bolts retaining
the pipe (2) to the filter support.
28
22. 28 SECTION 10 -
- ENGINE -
- CHAPTER 1
87666787A -
- 11 -
- 2007
25. Loosen the related clamps and remove the
sleeve (2) from the pipe (1) and remove the
transmission oil inlet pipe together with the
above--mentioned sleeve.
29
26. Unscrew the retaining bolts and remove the
guard (1). Do this on both sides.
30
27. Unscrew the retaining bolts and remove the cab
mat guard (2).
Remove the plastic pedal (1).
31
28. Unscrew the bolts (1) (on both sides), extract the
spring pin (2) and remove the throttle pedal (3).
32
23. SECTION 10 -
- ENGINE -
- CHAPTER 1 29
87666787A -
- 11 -
- 2007
29. Raise the front part of the cab mat; remove the
two plastic plugs and, through the hole (1),
unscrew the four upper bolts securing the engine
to the clutch casing.
33
30. Place a stand under the clutch casing, attach the
rear portion of the engine to a hoist, using chains
(1).
34
31. Unscrew the remaining bolts (1) securing the
engine to the clutch casing and separate the
engine with the front axle from the clutch casing.
35
32. Disconnect the connections (1) from the clogged
air filter sensor.
36
24. 30 SECTION 10 -
- ENGINE -
- CHAPTER 1
87666787A -
- 11 -
- 2007
33. Place a stand under the rear portion of the bevel
drive casing (T4040 Supersteer or T4050
Supersteer) or two stands: one under the axle
support at the rear and the other under the front
side. (models with standard front axle).
Keeping the chains (1, fig. 34) connected, join
one chain (5) to the front of the engine.
Unscrew the clamps and remove: the engine oil
vapour recirculation pipe (3), turbocharger intake
pipe (2), and the intake air cooler pipes (1 and 4).
37
34. Disconnect the lower (1) and upper sleeves from
the radiator, remove the bracket (2) fastening the
power steering pipe.
38
35. For the T4040 Deluxe or T4050 Deluxe models,
insert a wooden wedge on each side betweenthe
axle support and the axle itself.
For all models, unscrew the bolts (1) on both
sides and separate the engine from the
axle--support assembly with the radiator and
battery.
36. Rest the engine on an adequate support.
37. To re--fit the engine, proceed as follows.
ATTENTION
Use suitable tools to align the holes. NEVER USE
FINGERS OR HANDS.
-- Apply the torque settings listed on page 12.
-- Connect the engine, with chains, to the hoist.
39
25. SECTION 10 -
- ENGINE -
- CHAPTER 1 31
87666787A -
- 11 -
- 2007
-- Refit the engine to the axle--support assembly
with the radiator, battery, coolers: intake air and
transmission oil.
-- Connect the upper and lower sleeves of the
radiator to the engine.
-- Secure the power steering pipes.
-- Before refitting the engine to the clutch box
carefully clean the mating surfaces and apply
sealing compound (2 mm diameter), according
to the diagram shown Section 21, Chapter 1,
page 30.
-- Position the engine on the clutch casing and
secure it with the specific bolts.
-- Fit the plastic plugs on the cab floor.
-- Move the cab mat into the right position and
secure it with the two bolts on the upright (do this
on both sides).
-- Fit the throttle pedal with the plastic part.
-- Position and secure the guard of the cab mat (do
this on both sides).
-- Fit the two lower guards of the control panel (do
this on both sides).
-- Position, connect and secure the oil delivery pipe
to the lift.
-- Position, connect and secure the lift control
pump oil inlet pipe.
-- For models fitted with brakes on the front axle it
is necessary to connect the pipes to the related
block.
-- Position and secure the bracket between the
clutch housing and engine.
-- Position the propeller shaft, secure the central
support, slide the two front and rear sleeves and
secure them with the circlips.
-- If the tractor is a T4040 Deluxe or T4050 Deluxe
model, position the propeller shaft guard and
secure it.
-- If the tractor is a T4040 Supersteer or T4050
Supersteer model, position the propeller shaft
rear guard and secure it.
-- If the tractor is a T4040 Supersteer or T4050
Supersteer model, position the propeller shaft
front guard and secure it.
-- If the tractor is a T4040 Supersteer or T4050
Supersteer model, unscrew the retaining bolts
and remove the bracket 380001613 with the
spacers 50612.
-- Connect the differential lock control pipe.
-- Connect the pipes to the transmission oil cooler
pipes.
-- Connect the fuel supply and return lines to the
injection pump.
-- Connect the delivery pipe to the power steering
pump.
-- Connect all the electrical connections between
the cab and engine.
-- Position and secure the ground cable between
the cab and engine.
-- Position and secure the throttle control rod.
-- Position the upper engine bracket with the heat
guard and secure it.
-- Connect the front pipes to the rear pipes
delivering coolant to the cab heater.
-- Position and secure the brake fluid tank and
connect the electrical connection to the
above--mentioned part.
-- Connect the steering control pipes.
-- Connect the electric cable to the starter motor
and fit the relevant protection.
-- Position and secure the heat shield, exhaust
silencer to the engine and to the cab.
-- Position and secure: the compressor, condenser
and related pipes.
-- Connect the electrical connection to the
compressor.
-- Position and secure the side grille (do this on
both sides).
-- Secure: the radiator fixing bracket, engine oil
vapour recirculation pipe, inlet pipe and intake air
cooler pipes.
-- Connect the clogged air filter sensor pressure
switch and steering sensor connections.
-- For models fitted with brakes on the front axle it
is necessary to fill the relevant tank (see sect. 00,
page 6 for the prescribed product and quantity)
and bleed the braking system (see sect. 33).
26. 32 SECTION 10 -
- ENGINE -
- CHAPTER 1
87666787A -
- 11 -
- 2007
-- Screw the plug on the rear transmission casing
and fill up with oil (see sect. 00, page 6 for the
prescribed product and quantity).
-- Fill up the engine cooling system (see sect. 00,
page 6 for the prescribed product and quantity).
-- Position and secure the ballast support.
-- Position and secure the ballast.
-- Install the bonnet as described in operation
90 100 22.
27. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
28. SECTION 10 -
- ENGINE -
- CHAPTER 1 33
87666787A -
- 11 -
- 2007
Op. 10 001 54
ENGINE Disassembly -
- Assembly
The figures refer to the F4CE9484M*J601 versions
of 71 kW (97 hp) mod. T4050. The revision is to
highlight and describe the specific parts of the
versions F4CE9484N*J601 of 63 kW (86 hp) mod.
T4040 and their respective variants.
ATTENTION
Handle all parts carefully. Do not put your hands or
fingers between parts. Wear the prescribed safety
clothing, including goggles, gloves and safety
footwear.
1. Remove the engine as described in operation
10 001 10, proceed as follows.
2. Drain off the engine oil by removing the plug from
the sump and the oil filler plug.
3. Detach the fan unit from the fan pulley.
4. To be able to fit the bracket 380000661 (for fixing
the engine to the overhaul stand) to the
crankcase, it is necessary to remove the wiring
(1) from the left--hand side of the engine.
MIF1103A
40
5. To be able to fit the bracket 380000661 to the
crankcase on the right--hand side, remove the
starter motor (5), oil filter (3), clamp (4), and
turbine oil return pipe (1).
6. Fix the gearbox to the rotating stand 380000301.
Detach the oil delivery pipe (2).
MIF1104A
41
29. 34 SECTION 10 -
- ENGINE -
- CHAPTER 1
87666787A -
- 11 -
- 2007
7. Remove the intake manifold (2).
8. Disconnect the engine oil vapour recovery pipe
from the blow--by (3).
9. Remove the tappet covers (1).
10. Remove the pipes with the quick--fit coupling (6)
and (8).
11. Remove the piping from the LDA system (5).
12. Remove the fuel filter (7).
13. Remove the heater (4).
14. Remove the control unit for the heater (10).
15. Remove the fuel filter support (9).
MIF1105A
42
16. Remove the injector feed pipe (4) from the
injection pump (3).
17. Remove the brackets on the cylinder head of the
pipe assembly (1), (2) and (6).
18. Replace fuel supply pump (5).
MIF1107A
43
19. Detach the fuel pipe assembly (1) from the
injectors.
20. Remove the fuel outlet pipe (2) from the injectors
removing the screw (3) and the seal (4).
MIF1108A
44
30. SECTION 10 -
- ENGINE -
- CHAPTER 1 35
87666787A -
- 11 -
- 2007
21. Remove the screws (2) and the turbine (1).
22. Remove the exhaust manifold (3).
23. Remove the belt (3, fig. 46) of the auxiliary
members by loosening the tightener.
MIF1109A
45
24. Remove the alternator (6), fan pulley (2) and the
tightener (8). Remove the support (1) of the
pulley (2) and the oil cooler (7).
25. Remove the coolant pump (5).
26. Remove the engine cooling system fitting (4)
from the crankcase.
NOTE: The coolant pump (5) cannot be overhauled.
It must be replaced if there is any irregular operation.
MIF1110A
46
27. Lock the flywheel to stop it turning, remove the
fixing screws (1) from the pulley (2).
MIF1111A
47
Removing the crankshaft front seal
(Op. 28. ÷ 32.)
28. Apply tool 380000665 (4) on the front tang (2) of
the crankshaft.
29. Perforate the inner seal (1) with a drill bit
(∅
∅
∅
∅ 3.5 mm) through the guide holes of the tool
380000665 (4), for a depth of 5 mm.
30. Secure the tool 380000665 (4) to the seal (1) with
the screws (3) provided.
31. Extract the seal (1) by screwing down the screw
(5).
MIF0916A
48
31. 36 SECTION 10 -
- ENGINE -
- CHAPTER 1
87666787A -
- 11 -
- 2007
32. Fit the tie rod (3) of the tool 380000669 to the
outer seal (1) as shown in the figure 49 and with
the lever (4), extract it from the front cover (2).
MIF0917A
49
33. Turn the engine over, take out the screws (2) and
remove the oil sump (1).
MIF1117A
50
34. Take out the screws (2) and remove the oil pump
(1).
NOTE: The oil pump (1) cannot be overhauled.
It must be replaced if there is any irregular operation.
MIF1112A
51
35. Using the pin (1), lock the additional
counterweights (2) at the T.D.C.
Unscrew the retaining bolts (3) and remove the
additional counterweights (2).
MIF1113A
52
32. SECTION 10 -
- ENGINE -
- CHAPTER 1 37
87666787A -
- 11 -
- 2007
36. Before removing the injection pump, do the
timing and lock the engine flywheel with cylinder
no.1 at T.D.C. as indicated on page 8, using
tools 380000988 and 380000732. Then loosen
the bolt (2), remove the “ L” spacer (1) and lock
the screw (2) in order to keep the pump in time
with the engine flywheel.
NOTE: Keep the ”L” spacer with the pump casing.
MIF0920A
53
37. Remove the three nuts (2) (3) (5) securing the
injection pump (1) to the crankcase (4) and
extract it from its housing.
MIF0922A
54
38. Remove the screws (2) fixing the engine flywheel
(1) to the crankshaft.
MIF1115A
55
39. Screw two pins (2) of the appropriate length into
the holes in the crankshaft (3).
40. Extract the engine flywheel (1) so it can be slung
with the lift and put it away in a specific container.
MIF1116A
56
33. 38 SECTION 10 -
- ENGINE -
- CHAPTER 1
87666787A -
- 11 -
- 2007
Removing the crankshaft rear seal
(Op. 41.÷ 44.)
41. Extract the seal, fitting the tool 380000663 (3) on
the rear shank (1) of the crankshaft.
42. Perforate the inner seal (5) with a drill bit
(∅
∅
∅
∅ 3.5 mm) through the guide holes of the tool
380000663 (3), for a depth of 5 mm.
43. Secure the tool 380000663 (3) to the seal (5) by
screwing down the screws (2) supplied.
44. Extract the seal (5) by screwing down the screw
(4).
MIF0927A
57
45. Take out the screws (2) and remove the timing
gear box (1), retrieving the injection pump gear.
NOTE: Note down the assembly position of the
screws (2) as they have different sizes.
MIF1125A
58
46. Take out the screws (1) and remove the gears (3)
and (4) from the camshaft (2).
MIF1118A
59
47. Take out the bolts (1) and remove the hydraulic
pump drive gear (2).
MIF1119A
60
34. SECTION 10 -
- ENGINE -
- CHAPTER 1 39
87666787A -
- 11 -
- 2007
48. For each cylinder, remove the rocker arm
assembly (1) loosen the adjuster nuts (3),
unscrew the adjusters (4) and take out the
screws (2).
MIF0933A
61
49. Extract the injectors (2) with tool 380000671 (1).
MIF0934A
62
50. Take out the screws (1) fixing the head to the
crankcase.
MIF1120A
1
63
51. After fitting the brackets (1) and (2) hook the
metal cables and detach the cylinder head from
the crankcase with the hoist.
NOTE: After removing the cylinder head, remove the
brackets (1) and (2).
MIF1121A
64