This service manual provides maintenance and repair instructions for the E265C EVO Crawler Excavator. It includes sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and other parts. Technicians should follow the procedures carefully and use special tools whenever possible to safely service the excavator.
New holland e215 c evo tier 3 crawler excavator (lc version) service repair m...ujfdjjkskkdme
This document is a service manual for the E215C EVO crawler excavator. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms dippers and buckets, and the platform, cab, bodywork and decals. Each section includes subsections that provide instructions and specifications for maintenance and repair of individual components.
New holland e215 c evo tier 3 crawler excavator (lc version) service repair m...ufjjsjdkkskem
This document is a service manual for the E215C EVO crawler excavator. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms dippers and buckets, and the platform, cab, bodywork and decals. Each section includes subsections that provide instructions and specifications for maintenance and repair of individual components.
New holland e175 c evo tier 3 crawler excavator service repair manualujfdjjkskkdme
This document is a service manual for the E175C EVO Crawler Excavator. It contains information on servicing and repairing the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and other parts of the excavator. The manual instructs only qualified dealership personnel to perform repairs following the procedures outlined.
Case cx500 c crawler excavator service repair manual instant downloadufjjsjekkemmme
This document provides service information for the engine in a CX500C crawler excavator, including specifications, component identification, and required special tools. It contains detailed technical specifications and diagrams for the engine, cooling system, lubrication system, and electrical system. Special tools are listed for removing and installing cylinder liners from the crankcase.
Case cx500 c crawler excavator service repair manualjfjkskekemm
This document is a service manual that provides specifications and repair/maintenance instructions for the engine and various systems of a CX500C crawler excavator. It includes detailed sections on the engine and its components, hydraulic systems, frames and ballasting, tracks and suspension, cab climate control, electrical systems, work equipment, and other areas. The introduction provides safety guidelines for working on the machine.
Case cx180 c tier iii crawler excavator service repair manualfsjefjskekmm
This document is a service manual for the CX180C Crawler Excavator. It provides specifications and maintenance instructions for the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and other components. The manual contains detailed sections on engine components, cooling and lubrication systems, fuel injection and other engine systems. It also covers hydraulic pumps, valves, controls and circuits for excavator functions.
Case cx380 c crawler excavator service repair manualfusjefjjskekmem
This document is a service manual for CX350C and CX380C crawler excavators. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and other components. Safety is emphasized, and only qualified dealership personnel should perform repairs following the instructions in the manual. The manual contains detailed part numbers, diagrams, and troubleshooting codes to aid technicians with maintenance and repairs.
New holland e215 c evo tier 3 crawler excavator (lc version) service repair m...ufjkskemfseol
This document is a service manual for the E215C EVO crawler excavator. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms dippers and buckets, and the platform, cab, bodywork and decals. Each section includes subsections that provide instructions and specifications for maintenance and repair of individual components.
New holland e215 c evo tier 3 crawler excavator (lc version) service repair m...ujfdjjkskkdme
This document is a service manual for the E215C EVO crawler excavator. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms dippers and buckets, and the platform, cab, bodywork and decals. Each section includes subsections that provide instructions and specifications for maintenance and repair of individual components.
New holland e215 c evo tier 3 crawler excavator (lc version) service repair m...ufjjsjdkkskem
This document is a service manual for the E215C EVO crawler excavator. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms dippers and buckets, and the platform, cab, bodywork and decals. Each section includes subsections that provide instructions and specifications for maintenance and repair of individual components.
New holland e175 c evo tier 3 crawler excavator service repair manualujfdjjkskkdme
This document is a service manual for the E175C EVO Crawler Excavator. It contains information on servicing and repairing the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and other parts of the excavator. The manual instructs only qualified dealership personnel to perform repairs following the procedures outlined.
Case cx500 c crawler excavator service repair manual instant downloadufjjsjekkemmme
This document provides service information for the engine in a CX500C crawler excavator, including specifications, component identification, and required special tools. It contains detailed technical specifications and diagrams for the engine, cooling system, lubrication system, and electrical system. Special tools are listed for removing and installing cylinder liners from the crankcase.
Case cx500 c crawler excavator service repair manualjfjkskekemm
This document is a service manual that provides specifications and repair/maintenance instructions for the engine and various systems of a CX500C crawler excavator. It includes detailed sections on the engine and its components, hydraulic systems, frames and ballasting, tracks and suspension, cab climate control, electrical systems, work equipment, and other areas. The introduction provides safety guidelines for working on the machine.
Case cx180 c tier iii crawler excavator service repair manualfsjefjskekmm
This document is a service manual for the CX180C Crawler Excavator. It provides specifications and maintenance instructions for the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and other components. The manual contains detailed sections on engine components, cooling and lubrication systems, fuel injection and other engine systems. It also covers hydraulic pumps, valves, controls and circuits for excavator functions.
Case cx380 c crawler excavator service repair manualfusjefjjskekmem
This document is a service manual for CX350C and CX380C crawler excavators. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and other components. Safety is emphasized, and only qualified dealership personnel should perform repairs following the instructions in the manual. The manual contains detailed part numbers, diagrams, and troubleshooting codes to aid technicians with maintenance and repairs.
New holland e215 c evo tier 3 crawler excavator (lc version) service repair m...ufjkskemfseol
This document is a service manual for the E215C EVO crawler excavator. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms dippers and buckets, and the platform, cab, bodywork and decals. Each section includes subsections that provide instructions and specifications for maintenance and repair of individual components.
New holland e215 c evo tier 3 crawler excavator (lc version) service repair m...fusjefjskefkksem
This document is a service manual for the E215C EVO crawler excavator. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms dippers and buckets, and the platform, cab, bodywork and decals. Each section includes subsections that provide repair and maintenance instructions for specific components of the excavator. The manual emphasizes that all repair and maintenance work must be carried out by qualified dealership personnel according to the procedures in the manual.
New holland e215 c evo tier 3 crawler excavator (lc version) service repair m...fujsjfskekmm
This document is a service manual for the E215C EVO crawler excavator that contains information on the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and other components. It provides repair and maintenance instructions for qualified dealership personnel and warns against performing repairs without following the proper procedures.
New holland e215 c evo tier 3 crawler excavator (lc version) service repair m...ujdjfjkskmdm
The document is a service manual that provides specifications and maintenance information for the engine of a CNH Industrial Italia S.p.A. E215C EVO crawler excavator. It includes sections on the engine and crankcase, cooling system, electrical system, and identification/view of engine components. The manual provides detailed technical data, diagrams, and descriptions to guide servicing and repair work on the excavator engine.
New holland e215 c evo tier 3 crawler excavator (lc version) service repair m...fhjsekfksemert
The document is a service manual that provides specifications and maintenance information for the engine of a CNH Industrial Italia S.p.A. E215C EVO crawler excavator. It includes sections on the engine and crankcase, cooling system, electrical system, and identification/view of engine components. The manual provides detailed technical data, diagrams, and descriptions to guide servicing and repair work on the excavator engine.
New holland e175 c evo tier 3 crawler excavator service repair manualujdjfjkskmdm
This document is a service manual for the E175C EVO Crawler Excavator. It contains information on servicing and repairing various systems of the excavator including the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and other components. The manual provides part numbers and instructions for maintenance and repairs. It is intended to be used by qualified dealership personnel for servicing the excavator.
New holland e175 c evo tier 3 crawler excavator service repair manualfujsjfskekmm
This document is a service manual for the E175C EVO Crawler Excavator. It contains information on servicing and repairing the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and other parts of the excavator. The manual provides part numbers and instructions for maintenance and repairs performed by qualified dealership personnel using the specified tools and procedures.
New holland e175 c evo tier 3 crawler excavator service repair manualufjkskemfseol
This document is a service manual for the E175C EVO Crawler Excavator. It contains information on servicing and repairing the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and other parts of the excavator. The manual instructs only qualified dealership personnel to perform repairs following the procedures outlined.
New holland e175 c evo tier 3 crawler excavator service repair manualfhjsekfksemert
This document is a service manual for the E175C EVO Crawler Excavator. It contains information on servicing and repairing the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and other parts of the excavator. The manual instructs only qualified dealership personnel to perform repairs following the procedures outlined.
New holland e175 c evo tier 3 crawler excavator service repair manualfusjefjskefkksem
This service manual provides maintenance and repair instructions for the E175C EVO Crawler Excavator. It includes specifications and descriptions for the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and other components. The manual contains sections on safety, cleaning procedures, inspections, lubrication, and installing genuine replacement parts.
Case cx500 c crawler excavator service repair manualfdjjjsekkskemm
This document is a service manual that provides maintenance and repair instructions for the CX500C Crawler Excavator. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms dippers and buckets, and the platform, cab, bodywork and decals. Safety is emphasized and only qualified dealership personnel should perform repairs following the procedures outlined. The manufacturer is not responsible for damages caused by unauthorized parts. Specifications are subject to change without notice.
Case cx500 c crawler excavator service repair manualfjjskekfsem
This document provides service information for the CX500C crawler excavator. It includes specifications and component information for the excavator's engine, hydraulic systems, frames and ballasting, tracks and suspension, cab climate control, electrical systems, and other mechanical systems. The first section covers the engine, providing details on the crankcase, cylinder heads, pistons, crankshaft, fuel system, cooling system, lubrication system, and electrical components like the starter and alternator. Special tools are also listed for working on components like the cylinder liner.
Case cx180 c tier iii crawler excavator service repair manualfujjsefkskemme
This document is a service manual for the CX180C Crawler Excavator. It contains information on servicing and repairing the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and the platform, cab, bodywork, and decals. Safety is emphasized, and only qualified dealership personnel should perform repairs following the procedures in the manual. The manual provides specifications to service the excavator accurately.
Case cx180 c tier iii crawler excavator service repair manualyfhjsjefkksemme
This document is a service manual for the CX180C Crawler Excavator. It provides specifications and maintenance instructions for the excavator's engine systems, including the engine and crankcase, cooling system, lubrication system, fuel system, air intake and exhaust systems, and electrical systems. The manual also covers the excavator's hydraulic systems, frames and ballasting, tracks and suspension, cab climate control, and various mechanical components.
Case cx180 c tier iii crawler excavator service repair manualfjjskekksemmm
The document provides specifications and descriptions for the engine of a CX180C crawler excavator. It includes details on the engine model, components, cooling and fuel systems, electrical systems, identification, and descriptions. Key specifications listed are the engine displacement of 2.999L, injection type of common rail electronic control, and cooling type of water cooling. The engine uses a direct injection combustion chamber and features electronic control of injection timing and amount.
New holland e305 c evo crawler excavator service repair manualfusjefkskemme
This document is a service manual for an E305C EVO crawler excavator. It provides information on servicing and repairing the excavator's engine. The manual includes sections on the engine and crankcase, cooling system, electrical system, fuel system, and other engine components. It provides specifications, component descriptions, diagrams, and repair procedures.
New holland e305 c evo crawler excavator service repair manualjfdskekdmme
This document is a service manual for an E305C EVO crawler excavator. It contains sections on the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers and buckets, and other systems. The engine section provides detailed specifications, component descriptions, and maintenance information for the excavator's 6HK1X diesel engine, including the cylinder block, pistons, cylinder head, crankshaft, EGR system, and other engine parts.
New holland e305 c evo crawler excavator service repair manualuyydfhjjskkmd
This document is a service manual for the E305C EVO crawler excavator. It contains information on servicing the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and other components of the excavator. The manual provides part numbers and instructions for qualified service personnel to carry out repairs and maintenance. It emphasizes the importance of using approved parts and following procedures precisely.
Case cx180 c crawler excavator service repair manualfjjskekksemmm
The document is a service manual for a CX180C crawler excavator. It provides specifications and maintenance instructions for the excavator's engine systems, including the engine and crankcase, cooling system, fuel system, lubrication system, electrical systems, and emissions controls. The manual contains detailed sections on maintenance, repair, and replacement of engine components.
Caterpillar cat 385 b l excavator (prefix cls) service repair manual (cls0000...fjjskekdmme
The document provides assembly instructions for control valves for attachment, bucket, boom, right travel, left travel, and stick functions on 385B and 385B L excavators. It involves installing seals, spools, resolver valves, solenoids, pistons, actuators, and covers. Proper torque values are specified and safety precautions are provided due to parts being under spring load.
Caterpillar cat 385 b l excavator (prefix bly) service repair manual (bly0000...fjjskekdmme
This document provides instructions for disassembling and assembling a final drive on 385B and 385B L excavators. The disassembly process involves removing 27 components from the final drive housing using various tools. The assembly process reverses the disassembly steps and provides details on installing bearings and seals using anti-seize compound and determining the correct shim thickness between components.
Caterpillar cat 385 b l excavator (prefix bkf) service repair manual (bkf0000...fjjskekdmme
This document provides instructions for disassembling and assembling a final drive on 385B and 385B L excavators. The disassembly process involves removing 27 components from the final drive housing using various tools. The assembly process reverses the disassembly steps and includes pressing bearings into place, determining the correct shim thickness, and ensuring seals are not damaged. Precise alignment of parts and cleaning of components is important for proper reassembly.
Caterpillar cat 385 b excavator (prefix rcd) service repair manual (rcd00001 ...fjjskekdmme
The document provides instructions for disassembling and assembling various components of an excavator control valve, including:
1) Removing and installing a proportional valve, solenoid, bracket assembly, and cartridge.
2) Assembling resolver valves, installing seals and spools, and positioning valve covers.
3) Installing actuator groups, line relief valves, flow compensator valves, and mounting covers.
The summary covers the key components being disassembled/assembled and the high-level steps involved while keeping within the 3 sentence limit. It does not include part numbers or technical details.
More Related Content
Similar to New holland e265 c evo tier 3 crawler excavator lc version service repair manual
New holland e215 c evo tier 3 crawler excavator (lc version) service repair m...fusjefjskefkksem
This document is a service manual for the E215C EVO crawler excavator. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms dippers and buckets, and the platform, cab, bodywork and decals. Each section includes subsections that provide repair and maintenance instructions for specific components of the excavator. The manual emphasizes that all repair and maintenance work must be carried out by qualified dealership personnel according to the procedures in the manual.
New holland e215 c evo tier 3 crawler excavator (lc version) service repair m...fujsjfskekmm
This document is a service manual for the E215C EVO crawler excavator that contains information on the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and other components. It provides repair and maintenance instructions for qualified dealership personnel and warns against performing repairs without following the proper procedures.
New holland e215 c evo tier 3 crawler excavator (lc version) service repair m...ujdjfjkskmdm
The document is a service manual that provides specifications and maintenance information for the engine of a CNH Industrial Italia S.p.A. E215C EVO crawler excavator. It includes sections on the engine and crankcase, cooling system, electrical system, and identification/view of engine components. The manual provides detailed technical data, diagrams, and descriptions to guide servicing and repair work on the excavator engine.
New holland e215 c evo tier 3 crawler excavator (lc version) service repair m...fhjsekfksemert
The document is a service manual that provides specifications and maintenance information for the engine of a CNH Industrial Italia S.p.A. E215C EVO crawler excavator. It includes sections on the engine and crankcase, cooling system, electrical system, and identification/view of engine components. The manual provides detailed technical data, diagrams, and descriptions to guide servicing and repair work on the excavator engine.
New holland e175 c evo tier 3 crawler excavator service repair manualujdjfjkskmdm
This document is a service manual for the E175C EVO Crawler Excavator. It contains information on servicing and repairing various systems of the excavator including the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and other components. The manual provides part numbers and instructions for maintenance and repairs. It is intended to be used by qualified dealership personnel for servicing the excavator.
New holland e175 c evo tier 3 crawler excavator service repair manualfujsjfskekmm
This document is a service manual for the E175C EVO Crawler Excavator. It contains information on servicing and repairing the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and other parts of the excavator. The manual provides part numbers and instructions for maintenance and repairs performed by qualified dealership personnel using the specified tools and procedures.
New holland e175 c evo tier 3 crawler excavator service repair manualufjkskemfseol
This document is a service manual for the E175C EVO Crawler Excavator. It contains information on servicing and repairing the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and other parts of the excavator. The manual instructs only qualified dealership personnel to perform repairs following the procedures outlined.
New holland e175 c evo tier 3 crawler excavator service repair manualfhjsekfksemert
This document is a service manual for the E175C EVO Crawler Excavator. It contains information on servicing and repairing the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and other parts of the excavator. The manual instructs only qualified dealership personnel to perform repairs following the procedures outlined.
New holland e175 c evo tier 3 crawler excavator service repair manualfusjefjskefkksem
This service manual provides maintenance and repair instructions for the E175C EVO Crawler Excavator. It includes specifications and descriptions for the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and other components. The manual contains sections on safety, cleaning procedures, inspections, lubrication, and installing genuine replacement parts.
Case cx500 c crawler excavator service repair manualfdjjjsekkskemm
This document is a service manual that provides maintenance and repair instructions for the CX500C Crawler Excavator. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms dippers and buckets, and the platform, cab, bodywork and decals. Safety is emphasized and only qualified dealership personnel should perform repairs following the procedures outlined. The manufacturer is not responsible for damages caused by unauthorized parts. Specifications are subject to change without notice.
Case cx500 c crawler excavator service repair manualfjjskekfsem
This document provides service information for the CX500C crawler excavator. It includes specifications and component information for the excavator's engine, hydraulic systems, frames and ballasting, tracks and suspension, cab climate control, electrical systems, and other mechanical systems. The first section covers the engine, providing details on the crankcase, cylinder heads, pistons, crankshaft, fuel system, cooling system, lubrication system, and electrical components like the starter and alternator. Special tools are also listed for working on components like the cylinder liner.
Case cx180 c tier iii crawler excavator service repair manualfujjsefkskemme
This document is a service manual for the CX180C Crawler Excavator. It contains information on servicing and repairing the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and the platform, cab, bodywork, and decals. Safety is emphasized, and only qualified dealership personnel should perform repairs following the procedures in the manual. The manual provides specifications to service the excavator accurately.
Case cx180 c tier iii crawler excavator service repair manualyfhjsjefkksemme
This document is a service manual for the CX180C Crawler Excavator. It provides specifications and maintenance instructions for the excavator's engine systems, including the engine and crankcase, cooling system, lubrication system, fuel system, air intake and exhaust systems, and electrical systems. The manual also covers the excavator's hydraulic systems, frames and ballasting, tracks and suspension, cab climate control, and various mechanical components.
Case cx180 c tier iii crawler excavator service repair manualfjjskekksemmm
The document provides specifications and descriptions for the engine of a CX180C crawler excavator. It includes details on the engine model, components, cooling and fuel systems, electrical systems, identification, and descriptions. Key specifications listed are the engine displacement of 2.999L, injection type of common rail electronic control, and cooling type of water cooling. The engine uses a direct injection combustion chamber and features electronic control of injection timing and amount.
New holland e305 c evo crawler excavator service repair manualfusjefkskemme
This document is a service manual for an E305C EVO crawler excavator. It provides information on servicing and repairing the excavator's engine. The manual includes sections on the engine and crankcase, cooling system, electrical system, fuel system, and other engine components. It provides specifications, component descriptions, diagrams, and repair procedures.
New holland e305 c evo crawler excavator service repair manualjfdskekdmme
This document is a service manual for an E305C EVO crawler excavator. It contains sections on the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers and buckets, and other systems. The engine section provides detailed specifications, component descriptions, and maintenance information for the excavator's 6HK1X diesel engine, including the cylinder block, pistons, cylinder head, crankshaft, EGR system, and other engine parts.
New holland e305 c evo crawler excavator service repair manualuyydfhjjskkmd
This document is a service manual for the E305C EVO crawler excavator. It contains information on servicing the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and other components of the excavator. The manual provides part numbers and instructions for qualified service personnel to carry out repairs and maintenance. It emphasizes the importance of using approved parts and following procedures precisely.
Case cx180 c crawler excavator service repair manualfjjskekksemmm
The document is a service manual for a CX180C crawler excavator. It provides specifications and maintenance instructions for the excavator's engine systems, including the engine and crankcase, cooling system, fuel system, lubrication system, electrical systems, and emissions controls. The manual contains detailed sections on maintenance, repair, and replacement of engine components.
Similar to New holland e265 c evo tier 3 crawler excavator lc version service repair manual (18)
Caterpillar cat 385 b l excavator (prefix cls) service repair manual (cls0000...fjjskekdmme
The document provides assembly instructions for control valves for attachment, bucket, boom, right travel, left travel, and stick functions on 385B and 385B L excavators. It involves installing seals, spools, resolver valves, solenoids, pistons, actuators, and covers. Proper torque values are specified and safety precautions are provided due to parts being under spring load.
Caterpillar cat 385 b l excavator (prefix bly) service repair manual (bly0000...fjjskekdmme
This document provides instructions for disassembling and assembling a final drive on 385B and 385B L excavators. The disassembly process involves removing 27 components from the final drive housing using various tools. The assembly process reverses the disassembly steps and provides details on installing bearings and seals using anti-seize compound and determining the correct shim thickness between components.
Caterpillar cat 385 b l excavator (prefix bkf) service repair manual (bkf0000...fjjskekdmme
This document provides instructions for disassembling and assembling a final drive on 385B and 385B L excavators. The disassembly process involves removing 27 components from the final drive housing using various tools. The assembly process reverses the disassembly steps and includes pressing bearings into place, determining the correct shim thickness, and ensuring seals are not damaged. Precise alignment of parts and cleaning of components is important for proper reassembly.
Caterpillar cat 385 b excavator (prefix rcd) service repair manual (rcd00001 ...fjjskekdmme
The document provides instructions for disassembling and assembling various components of an excavator control valve, including:
1) Removing and installing a proportional valve, solenoid, bracket assembly, and cartridge.
2) Assembling resolver valves, installing seals and spools, and positioning valve covers.
3) Installing actuator groups, line relief valves, flow compensator valves, and mounting covers.
The summary covers the key components being disassembled/assembled and the high-level steps involved while keeping within the 3 sentence limit. It does not include part numbers or technical details.
Caterpillar cat 385 b excavator (prefix mya) service repair manual (mya00001 ...fjjskekdmme
The document provides instructions for disassembling and assembling components of an excavator control valve, including:
1) 25 steps for disassembling components like actuators, manifolds, solenoids, valves, seals and springs.
2) Instructions include using tools to support heavy components and releasing spring pressure safely.
3) The assembly section provides 14 steps for installing components like seals, springs, valves and solenoids back into the control valve in the reverse order of disassembly.
4) Special notes warn of risks like parts propelled by springs and provide torque specifications for tightening components.
Caterpillar cat 385 b excavator (prefix fdl) service repair manual (fdl00001 ...fjjskekdmme
This document provides instructions for disassembling and assembling the final drive of an excavator model 385B.
The disassembly procedure involves removing 27 parts in a specific sequence, including removing the final drive cover, ring gear, carrier assemblies, gears, and housing components. The assembly procedure instructs installing 31 parts in reverse order, including installing seals, bearings, gears, housings and determining the correct shim thickness. Precise tools and lifting devices are required due to the heavy weight of some components.
Caterpillar cat 385 b excavator (prefix cls) service repair manual (cls00001 ...fjjskekdmme
The document provides assembly instructions for control valves for attachment, bucket, boom, right travel, left travel, and stick functions on 385B and 385B L excavators. It involves installing seals, spools, resolver valves, solenoids, pistons, actuators, and covers. Proper torque values are specified and safety precautions are noted regarding spring-loaded parts.
Caterpillar cat 385 b excavator (prefix bly) service repair manual (bly00001 ...fjjskekdmme
This document provides instructions for disassembling and assembling a final drive on 385B and 385B L excavators. The disassembly process involves removing 27 components from the final drive housing using various tools. The assembly process reverses the disassembly steps and provides details on installing bearings and seals using anti-seize compound and determining the correct shim thickness between components.
Caterpillar cat 385 b excavator (prefix bkx) service repair manual (bkx00001 ...fjjskekdmme
This document provides instructions for disassembling and assembling the final drive of a 385B excavator. It includes:
1) A list of required tools for the job.
2) Detailed step-by-step instructions for removing over 30 components of the final drive, including gears, shafts, housings and seals.
3) Procedures for determining the correct bearing preload and installing new components.
Caterpillar cat 385 b excavator (prefix bkf) service repair manual (bkf00001 ...fjjskekdmme
This document provides instructions for disassembling and assembling a final drive on 385B and 385B L excavators. The disassembly process involves removing 27 components from the final drive housing using various tools. The assembly process reverses the disassembly steps and includes pressing bearings into place, determining the correct shim thickness, and ensuring seals are not damaged. Precise alignment of parts and cleaning of components is important for proper reassembly.
Caterpillar cat 374 f l excavator (prefix ebf) service repair manual (ebf0000...fjjskekdmme
1) The document provides disassembly and assembly instructions for a final drive on a 374F excavator.
2) It describes removing and installing over 30 individual parts in multiple steps, requiring various tools.
3) Precise measurements and shim selections are important to achieve proper bearing preload when reassembling.
Caterpillar cat 374 f excavator (prefix ebf) service repair manual (ebf00001 ...fjjskekdmme
1) The document provides disassembly and assembly instructions for the final drive of a 374F excavator.
2) It describes removing and installing over 30 individual parts in multiple steps, requiring various tools.
3) Precise measurements and shim selection are important to achieve proper bearing preload when reassembling.
Caterpillar cat 374 d l excavator (prefix pas) service repair manual (pas0000...fjjskekdmme
This document provides instructions for disassembling and assembling the final drive of a 374D L excavator. It lists the required tools and presents 33 steps for disassembly, removing all internal components. It then outlines 37 steps for reassembly, starting with cleaning and inspecting parts, and continuing through installing bearings, seals, gears, and housing components in the reverse order of disassembly. Tolerances and special installation tools are specified to ensure proper bearing preload and sealing.
Caterpillar cat 365 c l excavator (prefix mem) service repair manual (mem0000...fjjskekdmme
This document provides instructions for disassembling and assembling the final drive of a 365C excavator. It lists over 30 steps to remove components like the ring gear, carrier assemblies, gears, shafts and seals. Precise tools are required and components must be reinstalled in their original locations. Weights of removed parts are provided to assist with lifting. The assembly section details cleaning and lubricating components, setting proper bearing preload using shims, and installing seals using special tools.
Caterpillar cat 365 c l excavator (prefix mcs) service repair manual (mcs0000...fjjskekdmme
This document provides instructions for disassembling and assembling the final drive of a 365C excavator. It outlines 33 steps to disassemble the final drive by removing components like the ring gear, carrier assemblies, gears, shafts and seals. It then outlines 11 steps to reassemble the final drive, which includes determining the correct shim thickness between components and installing seals using specialized tools. The purpose is to provide maintenance technicians with a procedure to fully disassemble and reassemble the final drive.
Caterpillar cat 365 c l excavator (prefix elc) service repair manual (elc0000...fjjskekdmme
This document provides instructions for disassembling and assembling the travel motor of a 365C excavator. The disassembly process involves 29 steps to remove components like springs, plates, pistons, seals, and bearings. The assembly process reverses the disassembly with 31 steps, including verifying clearances with feeler gauges and heating components before installation. Tools required include retaining ring pliers, link brackets, and threaded rods for lifting. Personal safety warnings are provided throughout.
Caterpillar cat 365 c excavator (prefix mem) service repair manual (mem00001 ...fjjskekdmme
This document provides instructions for disassembling and assembling the final drive of a 365C excavator. It lists over 30 steps to remove components like the ring gear, carrier assemblies, gears, shafts and seals. Special tools are required to remove parts. Components must be cleaned and seals checked before assembly. The bearing preload is set using a hydraulic cylinder to apply precise pressure while shims are used to achieve the correct spacing.
Caterpillar cat 365 c excavator (prefix mcs) service repair manual (mcs00001 ...fjjskekdmme
This document provides instructions for disassembling and assembling the final drive of a 365C excavator. It describes removing over 30 individual parts in multiple steps. Key steps include using lifting tools to remove heavy components weighing up to 191 kg, driving out pins, and determining the correct shim thickness to achieve proper bearing preload. Cleaning and applying threadlock are emphasized throughout reassembly.
Caterpillar cat 365 c excavator (prefix elc) service repair manual (elc00001 ...fjjskekdmme
This document provides instructions for disassembling and assembling the travel motor of a 365C excavator. The disassembly process involves 29 steps to remove components like springs, plates, pistons, seals, and bearings. The assembly process reverses the disassembly with 31 steps, including verifying clearances with feeler gauges and heating components before installation. Tools required include retaining ring pliers, link brackets, and threaded rods for lifting. Personal safety warnings are provided throughout.
Caterpillar cat 365 b mh excavator (prefix cty) service repair manual (cty000...fjjskekdmme
This document provides assembly instructions for a final drive in 29 steps. It begins by cleaning all parts and checking seals. It then details assembling bearings and gears into housings using various tools. Precise measurements are taken to ensure proper bearing preload. Multiple planetary gear sets and carriers are assembled and installed. Washers, rings, and retaining rings are added. Bolts are tightened to specified torques to complete the assembly.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
8. INTRODUCTION
Foreword - Important notice regarding equipment servicing
All repair and maintenance work listed in this manual must be carried out only by qualified dealership personnel,
strictly complying with the instructions given, and using, whenever possible, the special tools.
Anyone who performs repair and maintenance operations without complying with the procedures provided herein
shall be responsible for any subsequent damages.
The manufacturer and all the organizations of its distribution chain, including - without limitation - national, regional, or
local dealers, reject any responsibility for damages caused by parts and/or components not approved by the manu-
facturer, including those used for the servicing or repair of the product manufactured or marketed by the manufacturer.
In any case, no warranty is given or attributed on the product manufactured or marketed by the manufacturer in case
of damages caused by parts and/or components not approved by the manufacturer.
The manufacturer reserves the right to make improvements in design and changes in specifications at any time without
notice and without incurring any obligation to install them on units previously sold. Specifications, descriptions, and
illustrative material herein are as accurate as known at time of publication but are subject to change without notice.
In case of questions, refer to your NEW HOLLAND CONSTRUCTION Sales and Service Networks.
48034217 22/06/2016
3
9. INTRODUCTION
Safety rules
Personal safety
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid possible death or injury.
Throughout this manual you will find the signal words DANGER, WARNING, and CAUTION followed by special in-
structions. These precautions are intended for the personal safety of you and those working with you.
Read and understand all the safety messages in this manual before you operate or service the machine.
DANGER indicates a hazardous situation that, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation that, if not avoided, could result in death or serious injury.
CAUTION indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.
FAILURE TO FOLLOW DANGER, WARNING, AND CAUTION MESSAGES COULD RESULT
IN DEATH OR SERIOUS INJURY.
Machine safety
NOTICE: Notice indicates a situation that, if not avoided, could result in machine or property damage.
Throughout this manual you will find the signal word Notice followed by special instructions to prevent machine or
property damage. The word Notice is used to address practices not related to personal safety.
Information
NOTE: Note indicates additional information that clarifies steps, procedures, or other information in this manual.
Throughout this manual you will find the word Note followed by additional information about a step, procedure, or
other information in the manual. The word Note is not intended to address personal safety or property damage.
48034217 22/06/2016
4
10. INTRODUCTION
Safety rules - General information
Cleaning
Clean the metal parts with cleaning solution that meets the standard and steam cleaning. (except for bearings)
After cleaning, dry well, and inject oil in all parts.
Also inject oil into the bearings after drying.
Inspection
When disassembling parts, check all the parts.
If there are any worn or damaged parts, replace them.
Inspect carefully to prevent initial breakdowns.
Bearing
Replace any loose bearings.
Air dry bearings before installing them.
Needle bearing
When inserting needle bearings, be very careful not to damage them.
Apply grease to the section where the needle bearing will be inserted.
Gear
Check that there is no wear and no damage.
Oil seal, O-ring, gasket
Always install new oil seals, O-rings, and gaskets.
Apply grease to sections where oil seals and O-rings will be inserted.
Shaft
Check that there is no wear and no damage.
Check the bearings and check for damaged oil seals on the shaft.
Service parts
Install NEW HOLLAND CONSTRUCTION genuine service parts.
When placing an order, check the parts catalog. It contains the NEW HOLLAND CONSTRUCTION genuine part
numbers.
Any breakdowns arising from the installation of non-genuine parts are not covered by the warranty.
Lubricants (fuel, hydraulic oil)
Use the oil from the specified company or specified in the operator's manual or service Manual.
Any breakdowns arising from any fuel or hydraulic oil other than those specified are not covered by the warranty.
48034217 22/06/2016
5
11. INTRODUCTION
Product identification
KRP22840-E01_1 1
When ordering parts, obtaining information or assistance, always supply your NEW HOLLAND CONSTRUCTION
Dealer with the type and serial number of your machine or accessories. Write the following in the spaces below:
the type, serial number and year of manufacture of your machine, accessories and the serial numbers of the various
hydraulic and mechanical components.
Machine
(1) Type / Model and Category:
(Hydraulic Excavator) E265C EVO.
(2) Product identification number:
KHP30830-B00 2
Engine
Make and type: ISUZU GI - 4HK1X
Serial number:
NOTICE: The engine and fuel system on your machine is
designed and built to government emissions standards.
Tampering by dealers, customers, operators and users
is STRICTLY PROHIBITED BY LAW. Failure to comply
could result in government fines, rework charges, invalid
warranty, legal action and possible confiscation of the ma-
chine until rework to original condition is completed. En-
gine service and/or repairs must be done by a certified
technician only. F77BYM-002 3
48034217 22/06/2016
53
13. Engine - Engine and crankcase
Engine - General specification
Engine main data
Item Engine model 4HK1
Type
Diesel / 4-cycle / water cooling, inline 4 cylinder
OHC
Shape of combustion chamber Direct injection type
Cylinder liner type Dry type
Cylinder bore x stroke 115 mm (4.528 in) x 125 mm (4.921 in)
Displacement 5.193 L (316.89 in³)
Compression ratio 17.5
Compression pressure 3.04 MPa (440.95 psi) 200 RPM
Idling rotation speed 800 RPM
In 0.4 mm (0.016 in) (while engine is cool)
Valve clearance
Out 0.4 mm (0.016 in) (while engine is cool)
Ignition type Compression ignition
Injection order 1, 3, 4, 2
Lubricant system
Lubricating type Pressure type
Oil pump type Gear type
Lubrication oil amount 13.0 - 20.5 L (3.434 - 5.416 US gal)
Oil filter type
Full flow filter with integral bypass valve (cartridge
type)
Oil cooled type Built-in, water cooled
Cooling system
Cooling type Water cooled
Radiator type Corrugated fin (pressure type)
Water pump type Spiral, belt type
Thermostat type Wax type unit
76.5 °C (170 °F) without jiggle valve
Thermostat valve opening temperature
82 °C (180 °F) with jiggle valve
Coolant capacity 14 L (3.70 US gal)
Fuel system
Injection pump type Electronic control common rail type
Governor type Electronic type
Timer type Electronic type
Injection nozzle type Porous type, 7 holes
Charging system
Generator type AC type
Output 24 V/ 50 A
Regulator type IC
Start system
Starter type Reduction type
Output 24 V / 5.0 kW
Preheat system type Glow plug
Glow plug standard voltage 23 V/ 3.5 A
48034217 22/06/2016
10.1 [10.001] / 3
14. Engine - Engine and crankcase
Cooling system main data
Item Data
Water pump Centrifugal impeller type
Pulley ratio 0.850 :
Thermostat Wax pellet type
76.5 °C (170 °F) without jiggle valve
Valve opening temperature
82 °C (180 °F) with jiggle valve
90 °C (194 °F) without jiggle valve
Full-open temperature
95.0 °C (203 °F) with jiggle valve
Electrical system main data
Generator
Item Data
Isuzu parts number 8980921161
Nominal output 24 V/ 50 A
Rated speed 5000 RPM
Regulator type IC type
Regulated voltage 28.5 V
Weight 9.5 kg (20.9 lb)
Starter
Type (Manufacturer) Nikko
Voltage 24 V
Output 5 kW (6.8 Hp)
Rated
Time 30 s
No. of pinion gears 13
Direction of rotation (toward pinion) Right
Weight (approx.) 8.0 kg (17.6 lb)
Current/voltage 85 A or less/ 23 V
No-load characteristics
Speed 3300 RPM or more
Current/voltage 400 A/ 18.5 V
Torque 28.4 N·m (20.95 lb ft) or more
Load characteristics
Speed 1250 RPM or more
Current/voltage 1400 A or less/ 9 V
Locking characteristics
Torque 88.2 N·m (65.05 lb ft) or more
Glow plug
Item Type
Preheat unit model Glow plug
Glow plug rated voltage 23 V
48034217 22/06/2016
10.1 [10.001] / 4
15. Engine - Engine and crankcase
Engine - Identification
Engine number
023AF579 1
1. Engine number stamping
48034217 22/06/2016
10.1 [10.001] / 5
18. Engine - Engine and crankcase
Engine - Static description
Engine electronic control
The ECM controls the range from injection to intake and exhaust, including the fuel injection quantity, injection timing,
intake air restriction, EGR and idling speed.
Cylinder block
The cylinder block is made of cast iron, with equal center distance for each bore and has high rigidity and the center
of the crankshaft matches the center of the block. The bearing caps have a ladder frame structure and are tightened
to its plastic region by the turn-of-nut method.
Cylinder liner
The cylinder liner is selected to match the bore inner diameter of the cylinder block. The ID number is stamped on
the left side of the cylinder.
Piston
The pistons are made of an aluminum alloy and use autothermatic pistons with cast struts. The combustion chamber
is the round re-entrant type
Cylinder head
The cylinder heads are made of cast iron and each cylinder has 4 valves. The cylinder head bolts use the angle
tightening method to further improve reliability and durability.
Crankshaft
The crankshaft uses tufftrided steel, and each of the journal diameter grades are marked on the No. 1 balance weight.
EGR system
The EGR system is controlled by the engine control module (ECM) based on the coolant temperature, engine speed
or engine load, and other data. It purifies the emission gas by recirculating it. The main components are the EGR
valve, EGR cooler, and sensors.
Connecting rod cap bolt
The connecting rod cap bolts use the angle tightening method to further improve reliability and durability.
Common rail (fuel rail) type electronic control injection system
The common rail type electronic control injection system consists of the fuel supply pump, which supplies fuel at the
target pressure value set for high-pressure fuel, the common rail, which measures the high-pressure fuel, and the
fuel injector, which turns the fuel into a fine mist and inject it. Each is controlled by the ECM based on signals. The
injection timing and injection quantity are controlled according to the operating conditions.
Fuel injector
The fuel injectors use 7-hole nozzles. The fuel injection quantity and injection timing are adjusted by opening and
closing the electromagnetic valve at the injector head portion.
The ECM corrects for variance in fuel injection quantity between the fuel injectors according to the ID code data in
memory. When fuel injectors are adjusted, the ID code data must be recorded in the ECM.
Fuel filter with sedimenter
The fuel filter with sedimenter uses the difference in specific gravity between diesel and water to remove any water
from the fuel. When the filter fills up with water, an indicator notifies the operator.
48034217 22/06/2016
10.1 [10.001] / 8
19. Engine - Engine and crankcase
Preheat system
The preheat system consists of the ECM, glow relay, glow plug, and glow indicator lamp. The preheat system operates
when the engine coolant temperature is low and assists engine starting.
Lubricating system
A full-flow bypass integrated oil filter is used and the pistons are cooled with the water-cooled oil cooler and oil jets.
48034217 22/06/2016
10.1 [10.001] / 9
20. Engine - Engine and crankcase
Engine - Prepare
WARNING
Escaping fluid!
Hydraulic fluid or diesel fuel leaking under pressure can penetrate the skin and cause infection or
other injury. To prevent personal injury: Relieve all pressure before disconnecting fluid lines or per-
forming work on the hydraulic system. Before applying pressure, make sure all connections are tight
and all components are in good condition. Never use your hand to check for suspected leaks under
pressure. Use a piece of cardboard or wood for this purpose. If injured by leaking fluid, see your
doctor immediately.
Failure to comply could result in death or serious injury.
W0178A
WARNING
Avoid injury!
Shut off the engine, remove the key, and make sure all motion is stopped before servicing the machine.
Failure to comply could result in death or serious injury.
W1128A
WARNING
Crushing hazard!
The lifting systems must be operated by qualified personnel who are aware of the correct procedures
to follow. Make sure all lifting equipment is in good condition, and all hooks are equipped with safety
latches.
Failure to comply could result in death or serious injury.
W0256A
WARNING
Heavy objects!
Lift and handle all heavy components using lifting equipment with adequate capacity. Always support
units or parts with suitable slings or hooks. Make sure the work area is clear of all bystanders.
Failure to comply could result in death or serious injury.
W0398A
WARNING
Explosion hazard!
Batteries emit explosive gases. Always ventilate when using in an enclosed area or when charging.
Keep the battery away from sparks, open flames, and other ignition sources.
Failure to comply could result in death or serious injury.
W0369A
NOTICE: Keep away from flames.
NOTICE: The air conditioner circuit is filled with high pressure gas, gas may spray out dangerously when loosening
lines.
48034217 22/06/2016
10.1 [10.001] / 10
21. Engine - Engine and crankcase
Items to prepare:
• Wrenches [ 7 mm, 8 mm, 10 mm, 13 mm, 17 mm,
36 mm]
• Box wrench [ 24 mm]
• Shackle (with the required lifting capacity) x 2
• Wire rope (with the required breaking load)
• Lifting equipment (with the required lifting capacity)
• Marking pen
• Caps
• Plugs
• Waste oil can
• Rag
• Cleaning fluid
• Wood plank
48034217 22/06/2016
10.1 [10.001] / 11
22. Engine - Engine and crankcase
Engine - Remove
1. Remove the counterweight. (For details, See " Coun-
terweight - Remove (39.140)").
2. Remove the pump. (For details, See " Pump - Remove
(35.106)").
3. Use a wrench to remove the bolts (1) and (2), and then
remove the fan shroud (3).
LPIL12CX00144BB 1
4. Use a wrench to remove the bolts (1), and then remove
the fan guard (2).
LPIL12CX00145AB 2
5. Use a wrench [ 7 mm] to loosen the hose band (1) on
the radiator, and then remove the upper hose (2).
SMIL13CEX1230AB 3
48034217 22/06/2016
10.1 [10.001] / 12
23. Engine - Engine and crankcase
6. Use a wrench [ 7 mm] to loosen the hose band (1) on
the radiator, and then remove the lower hose (2).
• Use caps to cover the radiator and hoses to prevent
the entry of water, dust or dirt.
• Before removing the radiator hoses, completely
drain the coolant.
SMIL13CEX1231AB 4
7. Use a wrench [ 13 mm] to loosen the line bolts (1) in 2
locations, and then remove the 2 lines (2) and (3) from
the compressor.
• Always remove the low-pressure (suction side) line
(2) first.
• Install caps or plugs to the compressor and lines to
prevent any entry of water, dust or dirt.
3. Line (discharge side)
SMIL13CEX1232AB 5
8. Use a wrench [ 8 mm] to loosen the hose band (1) on
the intercooler, and then remove the hose (2).
• Use caps to cover the line and hose to prevent the
entry of water, dust or dirt.
SMIL13CEX1233AB 6
9. Remove the hose bands (1) in the 3 locations.
SMIL13CEX1234AB 7
48034217 22/06/2016
10.1 [10.001] / 13
24. Engine - Engine and crankcase
10. Prepare a waste oil can (1).
• Drain the engine oil before removing the engine oil
hose.
SMIL13CEX1235AB 8
11. Use a wrench [ 36 mm] to remove the 2 engine oil
remote hoses (1).
• Mark the engine and hoses so that the connectors
match at the time of assembly.
• Install caps or plugs to the engine and hoses to pre-
vent any entry of water, dust or dirt.
• Clean the engine and hoses by spraying them with
a parts cleaner to prevent scratches and prevent dirt
from accumulating on the connectors.
SMIL13CEX1236AB 9
12. Use a wrench [ 17 mm] to remove the bolt (1), and
then remove the negative-side battery cable (2).
• After removing terminals or harnesses, fix them to
the frame or a similar location so they do not interfere
with the frame. Also, be sure to protect them with
a rubber cap or other protective device, to prevent
sparks.
SMIL13CEX1237AB 10
13. Use a wrench [ 8 mm] to remove the 1 nut (1), and
then remove the wiring (2) from the starter motor.
SMIL13CEX1238AB 11
48034217 22/06/2016
10.1 [10.001] / 14
25. Engine - Engine and crankcase
14. Use a wrench to remove the 1 nut (1), and then re-
move the wiring (2) from the starter motor.
SMIL13CEX1239AB 12
15. Remove the hose band (1), and then remove the fuel
hose (2).
• Install caps or plugs to the engine and hose to pre-
vent any entry of water, dust or dirt.
SMIL13CEX1240AB 13
16. Remove the hose band (1), and then remove the fuel
hose (2).
• Install caps or plugs to the engine and hoses to pre-
vent any entry of water, dust or dirt.
SMIL13CEX1241AB 14
17. Use a wrench [ 13 mm] to remove the 2 bolts (1), and
then remove the connector bracket (2).
SMIL13CEX1242AB 15
48034217 22/06/2016
10.1 [10.001] / 15
26. Engine - Engine and crankcase
18. Use a wrench [ 13 mm] to remove the hose band (1)
from the bracket, and then remove the connectors (2).
• Wrap the removed connectors in plastic after tying
them together.
SMIL13CEX1243AB 16
19. Loosen the hose band (1), and then remove the heater
hose (2).
• Install caps or plugs to the engine and hose to pre-
vent any entry of water, dust or dirt.
SMIL13CEX1244AB 17
20. Loosen the hose band (1), and then remove the heater
hose (2).
• Install caps or plugs to the engine and hose to pre-
vent any entry of water, dust or dirt.
SMIL13CEX1245AB 18
21. Use a wrench [ 7 mm] to loosen the hose band (1),
and then remove the radiator hose (2).
• Use caps to cover the lines and hoses to prevent any
entry of water, dust or dirt.
SMIL13CEX1246AB 19
48034217 22/06/2016
10.1 [10.001] / 16
27. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
28. Engine - Engine and crankcase
22. Use a wrench [ 8 mm] to loosen the hose band (1),
and then remove the air hose (2).
• Use caps to cover the lines and hoses to prevent any
entry of water, dust or dirt.
SMIL13CEX1247AB 20
23. Use a wrench [ 7 mm] to loosen the hose band (1),
and then remove the air hose (2).
• Use caps to cover the line and hose to prevent any
entry of water, dust or dirt.
SMIL13CEX1248AB 21
24. Remove the connectors (1) from the alternator.
SMIL13CEX1249AB 22
25. Use a wrench [ 10 mm] to remove the nut (1), and then
remove the wiring from the alternator (2).
SMIL13CEX1250AB 23
48034217 22/06/2016
10.1 [10.001] / 17
29. Engine - Engine and crankcase
26. Use a wrench [ 13 mm] to remove the bolt (1), and
then remove the radiator hose clamp (2).
SMIL13CEX1251AB 24
27. Install the 2 shackles (1), and then use the wire rope
(2) and liftcrane to secure the engine.
SMIL13CEX1252BB 25
48034217 22/06/2016
10.1 [10.001] / 18
30. Engine - Engine and crankcase
28. Use a box wrench [ 24 mm] to remove the 4 bolts (1)
from the mount.
SMIL13CEX1253BB 26
29. Use the wire rope (1) and liftcrane to lift the engine.
Thoroughly check that the location is safe before low-
ering the engine on wood planks, etc.
SMIL13CEX1254BB 27
48034217 22/06/2016
10.1 [10.001] / 19
31. Engine - Engine and crankcase
Engine - Install
1. To install the engine, perform the reverse of the removal
procedure.
When installing each bolt, tighten them to the specified
torque.
For bolts for which the torque is not specified, see
Torque - Bolt and nut ().
After installing the engine, resupply coolant and engine
oil, perform fuel line air bleeding, cleaning, and perform
filling for the air conditioner gas. For details, see the
individual explanations for each procedure.
2. Run the engine at no-load idling and check for any wa-
ter or oil leaks.
3. Attach the hydraulic pump, covers, and counterweight.
For details, see the individual explanations for each
procedure.
48034217 22/06/2016
10.1 [10.001] / 20
32. Engine - Engine and crankcase
Engine - Check - Engine oil
WARNING
Burn hazard!
Do not handle any service fluid (engine coolant, engine oil, hydraulic oil, etc.) at temperatures that
exceed 49 °C (120 °F). Allow fluids to cool before proceeding.
Failure to comply could result in death or serious injury.
W0330B
NOTICE: The engine should be in a horizontal position.
NOTICE: Wait at least 5 min before starting the engine and after stopping the engine.
Engine oil inspection
1. Remove the oil level gauge from the oil level gauge
guide tube.
NOTE: Wipe off the engine oil remaining on the oil level
gauge.
2. Install the oil level gauge to the oil level gauge guide
tube.
3. Remove the oil level gauge from the oil level gauge
guide tube.
4. Inspect the engine oil.
NOTE: Check the engine oil remaining on the oil level
gauge to inspect the engine oil level.
1. Upper limit
2. Lower limit
NOTE: If the oil level is under the lower limit, add engine
oil. Replace the engine oil if engine oil is dirty.
DD888164 1
48034217 22/06/2016
10.1 [10.001] / 21
33. Engine - Engine and crankcase
Engine - Compression test
Engine compression pressure inspection
• Warm-up the engine.
1. Remove the glow plug from the cylinder head assem-
bly.
• Remove all glow plugs.
2. Remove the injector harness connector (1) from the
lower cover.
SMIL13CEX0801AB 1
3. Install the special tool on the cylinder head assembly.
• Insert the compression gauge adapter into the instal-
lation hole of the glow plug to install the compression
gauge.
LPIL12CX04447AA 2
• Measure the compression pressure.
• Rotate the starter, and read the indication of the
compression pressure when the compression gauge
needle stabilizes at approximately 200 RPM.
• Measure the compression pressure of all cylinders.
LPIL12CX04448AA 3
48034217 22/06/2016
10.1 [10.001] / 22