This service manual provides information for servicing the following components of a D150C Crawler Dozer:
- Engine and related systems such as air cleaners, fuel filters, cooling and emissions systems
- Hydrostatic drive system
- Brakes and controls
- Hydraulic systems including cylinders, pumps and valves
- Tracks and track suspension
- Cab climate control and electrical systems
- Dozer blade and tools
- Cab, bodywork and decals
It provides removal and installation instructions, specifications and troubleshooting information for maintaining and repairing these components.
Case 1650 m stage iiib crawler dozer service repair manual (pin nfdc16000 and...fujsekkskemm
This document is a service manual for CNH Industrial's 1650M Stage IIIB Crawler Dozer covering various models. It contains introduction and safety information, and outlines the contents which are organized by system and include the engine, hydrostatic drive, brakes and controls, hydraulic systems, tracks and suspension, cab climate control, electrical systems, dozer blade, tools, and other components. The manual provides service and repair instructions for maintenance of the dozer.
New holland d180 c stage iiib crawler dozer service repair manual (pin nfdc18...ujjfdjkjskkmdm
This document is a service manual for CNH Industrial's D180C Stage IIIB Crawler Dozer covering the following models: D180C Long Track, D180C Extra Long Track, and D180C Wide Track. The manual provides maintenance and repair instructions for the dozer's engine, hydraulic systems, tracks, cab climate control, electrical systems, dozer blade, tools, platform, and other components. It includes over 200 sections organized by subsystem with part numbers and replacement instructions.
Case 1150 m tier 2 crawler dozer service repair manual (pin nfdc11000 and above)fusjejfjsekfkem
This document is a service manual for the Case 1150M Tier 2 Crawler Dozer that provides information on maintenance and repair procedures. It includes sections covering the engine, hydrostatic drive, brakes and controls, hydraulic systems, tracks and suspension, cab climate control, electrical systems, dozer blade and arm, and the platform, cab and bodywork. The manual instructs that all repair and maintenance work be carried out only by qualified dealership personnel strictly following the instructions provided using special tools whenever possible.
New holland d180 c power angle tilt (pat) blade, long track (lt) tier 2 cra...ujdfjskkmmed
This document is a service manual for the D180C Crawler Dozer that contains information on engine systems, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, dozer blade and arm, tools, and platform, cab, bodywork, and decals. It includes sections covering specific components and systems with information to aid in servicing the equipment.
Case 650 m tier 4b (final) crawler dozer service repair manual instant downlo...ufsjejfsekeme
This document provides a service manual for the 650M Crawler Dozer in both long track and wide track configurations with a Tier 4B final engine. It contains an introduction, table of contents, and sections covering maintenance for various systems of the dozer including the engine, hydraulics, electrical, tracks, cab, and safety information. The manual is intended to be used by qualified service technicians for repair and maintenance of the 650M dozer.
Case 650 m tier 4b (final) crawler dozer service repair manual (pin nhc100263...ufdjjskefksmem
This document provides a service manual for the 650M Crawler Dozer in both long track and wide track configurations with a Tier 4B final engine. It contains an introduction, table of contents, and sections covering maintenance for various systems of the dozer including the engine, hydraulics, electrical, tracks, cab, and safety information. The manual is intended to be used by qualified service technicians for repair and maintenance of the 650M dozer.
Case 650 m tier 4b (final) crawler dozer service repair manual (pin nhc100263...ujjfkskeksmem
This document provides a service manual for the 650M Crawler Dozer in both long track and wide track configurations with a Tier 4B final engine. It contains an introduction, table of contents, and sections covering maintenance for various systems of the dozer including the engine, hydraulics, electrical, tracks, cab controls and more. Safety information is provided to ensure the personal safety of those servicing the machine.
CASE 1650M Tier 4A (interim) Crawler Dozer Service Repair Manual (PIN NDDC165...fjksmmdmder
This document is the service manual for the Case 1650M crawler dozer. It provides information on servicing the engine, hydrostatic drive, brakes, hydraulic systems, tracks and track suspension, cab climate control, electrical systems, dozer blade, tools, platform, cab, and decals. The manual covers models with extra long track and either a bulldozer blade or power angle tilt blade for the North American market, powered by a F4HFE6132*A004 engine. It is the second edition, published in November 2017 in the U.S.A., replacing an earlier manual.
Case 1650 m stage iiib crawler dozer service repair manual (pin nfdc16000 and...fujsekkskemm
This document is a service manual for CNH Industrial's 1650M Stage IIIB Crawler Dozer covering various models. It contains introduction and safety information, and outlines the contents which are organized by system and include the engine, hydrostatic drive, brakes and controls, hydraulic systems, tracks and suspension, cab climate control, electrical systems, dozer blade, tools, and other components. The manual provides service and repair instructions for maintenance of the dozer.
New holland d180 c stage iiib crawler dozer service repair manual (pin nfdc18...ujjfdjkjskkmdm
This document is a service manual for CNH Industrial's D180C Stage IIIB Crawler Dozer covering the following models: D180C Long Track, D180C Extra Long Track, and D180C Wide Track. The manual provides maintenance and repair instructions for the dozer's engine, hydraulic systems, tracks, cab climate control, electrical systems, dozer blade, tools, platform, and other components. It includes over 200 sections organized by subsystem with part numbers and replacement instructions.
Case 1150 m tier 2 crawler dozer service repair manual (pin nfdc11000 and above)fusjejfjsekfkem
This document is a service manual for the Case 1150M Tier 2 Crawler Dozer that provides information on maintenance and repair procedures. It includes sections covering the engine, hydrostatic drive, brakes and controls, hydraulic systems, tracks and suspension, cab climate control, electrical systems, dozer blade and arm, and the platform, cab and bodywork. The manual instructs that all repair and maintenance work be carried out only by qualified dealership personnel strictly following the instructions provided using special tools whenever possible.
New holland d180 c power angle tilt (pat) blade, long track (lt) tier 2 cra...ujdfjskkmmed
This document is a service manual for the D180C Crawler Dozer that contains information on engine systems, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, dozer blade and arm, tools, and platform, cab, bodywork, and decals. It includes sections covering specific components and systems with information to aid in servicing the equipment.
Case 650 m tier 4b (final) crawler dozer service repair manual instant downlo...ufsjejfsekeme
This document provides a service manual for the 650M Crawler Dozer in both long track and wide track configurations with a Tier 4B final engine. It contains an introduction, table of contents, and sections covering maintenance for various systems of the dozer including the engine, hydraulics, electrical, tracks, cab, and safety information. The manual is intended to be used by qualified service technicians for repair and maintenance of the 650M dozer.
Case 650 m tier 4b (final) crawler dozer service repair manual (pin nhc100263...ufdjjskefksmem
This document provides a service manual for the 650M Crawler Dozer in both long track and wide track configurations with a Tier 4B final engine. It contains an introduction, table of contents, and sections covering maintenance for various systems of the dozer including the engine, hydraulics, electrical, tracks, cab, and safety information. The manual is intended to be used by qualified service technicians for repair and maintenance of the 650M dozer.
Case 650 m tier 4b (final) crawler dozer service repair manual (pin nhc100263...ujjfkskeksmem
This document provides a service manual for the 650M Crawler Dozer in both long track and wide track configurations with a Tier 4B final engine. It contains an introduction, table of contents, and sections covering maintenance for various systems of the dozer including the engine, hydraulics, electrical, tracks, cab controls and more. Safety information is provided to ensure the personal safety of those servicing the machine.
CASE 1650M Tier 4A (interim) Crawler Dozer Service Repair Manual (PIN NDDC165...fjksmmdmder
This document is the service manual for the Case 1650M crawler dozer. It provides information on servicing the engine, hydrostatic drive, brakes, hydraulic systems, tracks and track suspension, cab climate control, electrical systems, dozer blade, tools, platform, cab, and decals. The manual covers models with extra long track and either a bulldozer blade or power angle tilt blade for the North American market, powered by a F4HFE6132*A004 engine. It is the second edition, published in November 2017 in the U.S.A., replacing an earlier manual.
CASE 1650M Tier 4A (interim) Crawler Dozer Service Repair Manual (PIN NEDC160...jnjn9464773
This document is the service manual for the Case 1650M Crawler Dozer covering model years NCDC16500 and above. It is the 2nd English edition from November 2017, replacing the previous manual from 2017. The manual provides maintenance and repair instructions for the dozer's engine, hydrostatic drive, brakes, hydraulic systems, tracks, cab climate control, electrical systems, dozer blade, tools, and other components. Safety precautions are included to avoid personal injury when servicing the equipment.
CASE 1650M Tier 4A (interim) Crawler Dozer Service Repair Manual (PIN NDDC165...f8usjkdkdmmd
This document is the service manual for the Case 1650M crawler dozer. It provides information on servicing the engine, hydrostatic drive, brakes, hydraulic systems, tracks and track suspension, cab climate control, electrical systems, dozer blade, tools, platform, cab, and decals. The manual covers models with extra long track and either a bulldozer blade or power angle tilt blade for the North American market, powered by a Tier 4A interim F4HFE6132*A004 engine. It is the second edition, published in November 2017 in the U.S.A., replacing an earlier manual.
CASE 1650M Tier 4A (interim) Crawler Dozer Service Repair Manual (PIN NCDC165...fujskekdjdmd
This document is the service manual for the Case 1650M Crawler Dozer covering model years NCDC16500 and above. It is the 2nd English edition from November 2017, replacing the previous manual from 2017. The manual provides maintenance and repair instructions for the dozer's engine, hydrostatic drive, brakes, hydraulic systems, tracks, cab climate control, electrical systems, dozer blade, tools, and other components. Safety precautions are included to avoid personal injury when servicing the equipment.
CASE 1650M Tier 4A (interim) Crawler Dozer Service Repair Manual (PIN NEDC160...zhan96lun
This document is the service manual for the Case 1650M crawler dozer. It covers models with extra long track and either a bulldozer blade or power angle tilt blade for the North American market, and replaces an earlier manual. The manual provides maintenance and repair instructions for the engine, hydrostatic drive, brakes, hydraulic systems, tracks, cab climate control, electrical systems, dozer blade, tools, and other components.
CASE 1650M Tier 4A (interim) Crawler Dozer Service Repair Manual (PIN NEDC160...f7usejkdkdmdmw2
This document is the service manual for the Case 1650M crawler dozer. It covers models with extra long track and either a bulldozer blade or power angle tilt blade for the North American market, and replaces an earlier manual. The manual provides maintenance and repair instructions for the engine, hydrostatic drive, brakes, hydraulic systems, tracks, cab climate control, electrical systems, dozer blade, tools, and other components.
CASE 1650M Tier 4A (interim) Crawler Dozer Service Repair Manual (PIN NFDC160...jnjn9464773
This document is the service manual for the Case 1650M Crawler Dozer covering model years NCDC16500 and above. It is the 2nd English edition from November 2017, replacing the previous manual from 47907868. The manual provides maintenance and repair instructions for the dozer's engine, hydrostatic drive, brakes, hydraulic systems, tracks, cab climate control, electrical systems, dozer blade, tools, and other components. Safety precautions are included to avoid personal injury when operating or servicing the equipment.
CASE 1650M Tier 4A (interim) Crawler Dozer Service Repair Manual (PIN NFDC160...zhan96lun
This document is the service manual for the Case 1650M crawler dozer. It provides information on servicing the engine, hydrostatic drive, brakes, hydraulic systems, tracks and track suspension, cab climate control, electrical systems, dozer blade, tools, platform, cab, and decals. The manual covers models with extra long track and either a bulldozer blade or power angle tilt blade for the North American market, powered by a Tier 4A interim F4HFE6132*A004 engine. It is the second edition, published in November 2017 in the U.S.A., replacing an earlier manual.
CASE 1650M Tier 4A (interim) Crawler Dozer Service Repair Manual (PIN NEDC160...fjksmmdmder
This document is the service manual for the Case 1650M crawler dozer. It provides information on servicing the engine, hydrostatic drive, brakes, hydraulic systems, tracks and track suspension, cab climate control, electrical systems, dozer blade, tools, platform, cab, and decals. The manual covers models with extra long track and either a bulldozer blade or power angle tilt blade for the North American market, powered by a Tier 4A interim F4HFE6132*A004 engine. It is the second edition, published in November 2017 in the U.S.A., replacing an earlier manual.
CASE 1650M Tier 4A (interim) Crawler Dozer Service Repair Manual (PIN NEDC160...fujskekdjdmd
This document is the service manual for the Case 1650M crawler dozer. It covers models with extra long track and either a bulldozer blade or power angle tilt blade for the North American market, and replaces an earlier manual. The manual provides maintenance and repair instructions for the engine, hydrostatic drive, brakes, hydraulic systems, tracks, cab climate control, electrical systems, dozer blade, tools, and other components.
CASE 1650M Tier 4A (interim) Crawler Dozer Service Repair Manual (PIN NCDC165...zhan96lun
This document is the service manual for the Case 1650M crawler dozer. It provides information on servicing the engine, hydrostatic drive, brakes, hydraulic systems, tracks, cab climate control, electrical systems, dozer blade, tools, platform, and decals. The manual covers models with extra long track and either a bulldozer blade or power angle tilt blade for the North American market, powered by a Tier 4A interim F4HFE6132*A004 engine. It is the second edition, published in November 2017 in the U.S.A., replacing an earlier manual.
CASE 1650M Tier 4A (interim) Crawler Dozer Service Repair Manual (PIN NCDC165...f7usejkdkdmdmw2
This document is the service manual for the Case 1650M Crawler Dozer covering model years NCDC16500 and above. It is the 2nd English edition from November 2017, replacing the previous manual from 47907868. The manual provides maintenance and repair instructions for the dozer's engine, hydrostatic drive, brakes, hydraulic systems, tracks, cab climate control, electrical systems, dozer blade, tools, and other components. Safety precautions are included to avoid personal injury when operating or servicing the equipment.
CASE 1650M Tier 4A (interim) Crawler Dozer Service Repair Manual (PIN NDDC165...f7usejkdkdmdmw2
This document is the service manual for the Case 1650M crawler dozer. It provides information on servicing the engine, hydrostatic drive, brakes, hydraulic systems, tracks and track suspension, cab climate control, electrical systems, dozer blade, tools, platform, cab, and decals. The manual covers models with extra long track and either a bulldozer blade or power angle tilt blade for the North American market, powered by a Tier 4A interim F4HFE6132*A004 engine. It is the second edition, published in November 2017 in the U.S.A., replacing an earlier manual.
CASE 1650M Tier 4A (interim) Crawler Dozer Service Repair Manual (PIN NDDC165...fujskekdjdmd
This document is the service manual for the Case 1650M crawler dozer. It covers models with extra long track and either a bulldozer blade or power angle tilt blade for the North American market, and replaces an earlier manual. The manual provides maintenance and repair instructions for the engine, hydrostatic drive, brakes, hydraulic systems, tracks, cab climate control, electrical systems, dozer blade, tools, and other components.
CASE 1650M Tier 4A (interim) Crawler Dozer Service Repair Manual (PIN NFDC160...fjksmmdmder
This document is the service manual for the Case 1650M crawler dozer. It provides information on servicing the engine, hydrostatic drive, brakes, hydraulic systems, tracks, cab climate control, electrical systems, dozer blade, tools, platform, and decals. The manual covers models with extra long track and either a bulldozer blade or power angle tilt blade for the North American market, powered by a Tier 4A interim F4HFE6132*A004 engine. It is the second edition, published in November 2017 in the U.S.A., replacing an earlier manual.
Kawasaki 70 z7 wheel loader service repair manual (serial no. 70c6 5001 and up)fujsekksmem
This document provides instructions for disassembling and reassembling a wheel loader. It contains safety precautions and procedures for disassembly, cleaning, inspection, assembly, bleeding air from systems, and releasing pressures. The document is divided into sections covering general information, maintenance standards, specific components of the body, travel system, front attachment, and technical content for disassembly and reassembly. Precautions are provided for using tools safely and properly handling components like seals, slings, and pressures systems to prevent damage and ensure correct reassembly.
Kawasaki 70 z6 wheel loader service repair manual (serial no. 70c7 0101 and up)fujsekksmem
This document contains shop manuals for the Kawasaki 70Z6 wheel loader. It includes information on the machine's specifications, components, systems, operation, maintenance standards, and disassembly and reassembly procedures. The manuals cover the machine's general information, functions and structure, operational performance testing, troubleshooting, and disassembly and reassembly. They are intended to provide technical information and service procedures for experienced technicians working on the 70Z6 wheel loader.
This document is an operation and maintenance manual for Hitachi wheel loaders models 70Z6 and 80Z6 powered by Cummins QSB6.7 engines. It contains sections on safety, components, operation, maintenance, transportation, and specifications. The safety section emphasizes safe work practices including wearing protective equipment, inspecting the machine, avoiding tipping or overloading, and securing the machine for transport. The components section describes the controls, indicators, and features of the operator's cab. The operation section provides instructions for starting, driving, and using the machine. The maintenance section outlines inspection schedules, fluid changes, and service procedures.
This document is an operation and maintenance manual for Hitachi wheel loaders models 70Z6 and 80Z6, powered by Cummins QSB6.7 engines. It contains sections on safety procedures, component identification, operation instructions, maintenance, troubleshooting, specifications, and other technical information for servicing the machines. Safety is the primary focus, with multiple pages outlining hazards and required precautions to prevent injury when operating or working on the loaders.
Kawasaki 70 tm7 wheel loader service repair manual (serial no. 70c6 5001 and up)fujsekksmem
This document provides instructions for disassembling and reassembling a wheel loader. It contains safety precautions and procedures for disassembly, cleaning, inspection, assembly, bleeding air from systems, and releasing pressures. The document is divided into sections covering general information, maintenance standards, specific components of the body, travel system, front attachment, and their groups. Precautions are given for tasks like using floating seals, nylon slings, cleaning, applying lubricants, and ensuring no tools are left inside after reassembly.
Kawasaki 67 z7b wheel loader service repair manual (serial no. 65c5 5001 and up)fujsekksmem
This document is a shop manual that provides specifications, component layout diagrams, and descriptions for a wheel loader. It includes sections on general information, system components, and operation of individual components. The manual aims to provide technical information for maintenance and repair of the machine.
This document is a parts catalog for a wheel loader powered by a Cummins QSB4.5 engine. It contains over 100 pages listing parts organized into sections for periodic replacement parts, engine, cooling device, air intake device, fuel system, exhaust device, hydraulic system, transmission, axles, tires, frame, and chassis. The parts are illustrated with diagrams and specifications to aid in maintenance and repairs.
More Related Content
Similar to New holland d150 c stage iiib crawler dozer service repair manual (pin nedc15000 and above)
CASE 1650M Tier 4A (interim) Crawler Dozer Service Repair Manual (PIN NEDC160...jnjn9464773
This document is the service manual for the Case 1650M Crawler Dozer covering model years NCDC16500 and above. It is the 2nd English edition from November 2017, replacing the previous manual from 2017. The manual provides maintenance and repair instructions for the dozer's engine, hydrostatic drive, brakes, hydraulic systems, tracks, cab climate control, electrical systems, dozer blade, tools, and other components. Safety precautions are included to avoid personal injury when servicing the equipment.
CASE 1650M Tier 4A (interim) Crawler Dozer Service Repair Manual (PIN NDDC165...f8usjkdkdmmd
This document is the service manual for the Case 1650M crawler dozer. It provides information on servicing the engine, hydrostatic drive, brakes, hydraulic systems, tracks and track suspension, cab climate control, electrical systems, dozer blade, tools, platform, cab, and decals. The manual covers models with extra long track and either a bulldozer blade or power angle tilt blade for the North American market, powered by a Tier 4A interim F4HFE6132*A004 engine. It is the second edition, published in November 2017 in the U.S.A., replacing an earlier manual.
CASE 1650M Tier 4A (interim) Crawler Dozer Service Repair Manual (PIN NCDC165...fujskekdjdmd
This document is the service manual for the Case 1650M Crawler Dozer covering model years NCDC16500 and above. It is the 2nd English edition from November 2017, replacing the previous manual from 2017. The manual provides maintenance and repair instructions for the dozer's engine, hydrostatic drive, brakes, hydraulic systems, tracks, cab climate control, electrical systems, dozer blade, tools, and other components. Safety precautions are included to avoid personal injury when servicing the equipment.
CASE 1650M Tier 4A (interim) Crawler Dozer Service Repair Manual (PIN NEDC160...zhan96lun
This document is the service manual for the Case 1650M crawler dozer. It covers models with extra long track and either a bulldozer blade or power angle tilt blade for the North American market, and replaces an earlier manual. The manual provides maintenance and repair instructions for the engine, hydrostatic drive, brakes, hydraulic systems, tracks, cab climate control, electrical systems, dozer blade, tools, and other components.
CASE 1650M Tier 4A (interim) Crawler Dozer Service Repair Manual (PIN NEDC160...f7usejkdkdmdmw2
This document is the service manual for the Case 1650M crawler dozer. It covers models with extra long track and either a bulldozer blade or power angle tilt blade for the North American market, and replaces an earlier manual. The manual provides maintenance and repair instructions for the engine, hydrostatic drive, brakes, hydraulic systems, tracks, cab climate control, electrical systems, dozer blade, tools, and other components.
CASE 1650M Tier 4A (interim) Crawler Dozer Service Repair Manual (PIN NFDC160...jnjn9464773
This document is the service manual for the Case 1650M Crawler Dozer covering model years NCDC16500 and above. It is the 2nd English edition from November 2017, replacing the previous manual from 47907868. The manual provides maintenance and repair instructions for the dozer's engine, hydrostatic drive, brakes, hydraulic systems, tracks, cab climate control, electrical systems, dozer blade, tools, and other components. Safety precautions are included to avoid personal injury when operating or servicing the equipment.
CASE 1650M Tier 4A (interim) Crawler Dozer Service Repair Manual (PIN NFDC160...zhan96lun
This document is the service manual for the Case 1650M crawler dozer. It provides information on servicing the engine, hydrostatic drive, brakes, hydraulic systems, tracks and track suspension, cab climate control, electrical systems, dozer blade, tools, platform, cab, and decals. The manual covers models with extra long track and either a bulldozer blade or power angle tilt blade for the North American market, powered by a Tier 4A interim F4HFE6132*A004 engine. It is the second edition, published in November 2017 in the U.S.A., replacing an earlier manual.
CASE 1650M Tier 4A (interim) Crawler Dozer Service Repair Manual (PIN NEDC160...fjksmmdmder
This document is the service manual for the Case 1650M crawler dozer. It provides information on servicing the engine, hydrostatic drive, brakes, hydraulic systems, tracks and track suspension, cab climate control, electrical systems, dozer blade, tools, platform, cab, and decals. The manual covers models with extra long track and either a bulldozer blade or power angle tilt blade for the North American market, powered by a Tier 4A interim F4HFE6132*A004 engine. It is the second edition, published in November 2017 in the U.S.A., replacing an earlier manual.
CASE 1650M Tier 4A (interim) Crawler Dozer Service Repair Manual (PIN NEDC160...fujskekdjdmd
This document is the service manual for the Case 1650M crawler dozer. It covers models with extra long track and either a bulldozer blade or power angle tilt blade for the North American market, and replaces an earlier manual. The manual provides maintenance and repair instructions for the engine, hydrostatic drive, brakes, hydraulic systems, tracks, cab climate control, electrical systems, dozer blade, tools, and other components.
CASE 1650M Tier 4A (interim) Crawler Dozer Service Repair Manual (PIN NCDC165...zhan96lun
This document is the service manual for the Case 1650M crawler dozer. It provides information on servicing the engine, hydrostatic drive, brakes, hydraulic systems, tracks, cab climate control, electrical systems, dozer blade, tools, platform, and decals. The manual covers models with extra long track and either a bulldozer blade or power angle tilt blade for the North American market, powered by a Tier 4A interim F4HFE6132*A004 engine. It is the second edition, published in November 2017 in the U.S.A., replacing an earlier manual.
CASE 1650M Tier 4A (interim) Crawler Dozer Service Repair Manual (PIN NCDC165...f7usejkdkdmdmw2
This document is the service manual for the Case 1650M Crawler Dozer covering model years NCDC16500 and above. It is the 2nd English edition from November 2017, replacing the previous manual from 47907868. The manual provides maintenance and repair instructions for the dozer's engine, hydrostatic drive, brakes, hydraulic systems, tracks, cab climate control, electrical systems, dozer blade, tools, and other components. Safety precautions are included to avoid personal injury when operating or servicing the equipment.
CASE 1650M Tier 4A (interim) Crawler Dozer Service Repair Manual (PIN NDDC165...f7usejkdkdmdmw2
This document is the service manual for the Case 1650M crawler dozer. It provides information on servicing the engine, hydrostatic drive, brakes, hydraulic systems, tracks and track suspension, cab climate control, electrical systems, dozer blade, tools, platform, cab, and decals. The manual covers models with extra long track and either a bulldozer blade or power angle tilt blade for the North American market, powered by a Tier 4A interim F4HFE6132*A004 engine. It is the second edition, published in November 2017 in the U.S.A., replacing an earlier manual.
CASE 1650M Tier 4A (interim) Crawler Dozer Service Repair Manual (PIN NDDC165...fujskekdjdmd
This document is the service manual for the Case 1650M crawler dozer. It covers models with extra long track and either a bulldozer blade or power angle tilt blade for the North American market, and replaces an earlier manual. The manual provides maintenance and repair instructions for the engine, hydrostatic drive, brakes, hydraulic systems, tracks, cab climate control, electrical systems, dozer blade, tools, and other components.
CASE 1650M Tier 4A (interim) Crawler Dozer Service Repair Manual (PIN NFDC160...fjksmmdmder
This document is the service manual for the Case 1650M crawler dozer. It provides information on servicing the engine, hydrostatic drive, brakes, hydraulic systems, tracks, cab climate control, electrical systems, dozer blade, tools, platform, and decals. The manual covers models with extra long track and either a bulldozer blade or power angle tilt blade for the North American market, powered by a Tier 4A interim F4HFE6132*A004 engine. It is the second edition, published in November 2017 in the U.S.A., replacing an earlier manual.
Similar to New holland d150 c stage iiib crawler dozer service repair manual (pin nedc15000 and above) (14)
Kawasaki 70 z7 wheel loader service repair manual (serial no. 70c6 5001 and up)fujsekksmem
This document provides instructions for disassembling and reassembling a wheel loader. It contains safety precautions and procedures for disassembly, cleaning, inspection, assembly, bleeding air from systems, and releasing pressures. The document is divided into sections covering general information, maintenance standards, specific components of the body, travel system, front attachment, and technical content for disassembly and reassembly. Precautions are provided for using tools safely and properly handling components like seals, slings, and pressures systems to prevent damage and ensure correct reassembly.
Kawasaki 70 z6 wheel loader service repair manual (serial no. 70c7 0101 and up)fujsekksmem
This document contains shop manuals for the Kawasaki 70Z6 wheel loader. It includes information on the machine's specifications, components, systems, operation, maintenance standards, and disassembly and reassembly procedures. The manuals cover the machine's general information, functions and structure, operational performance testing, troubleshooting, and disassembly and reassembly. They are intended to provide technical information and service procedures for experienced technicians working on the 70Z6 wheel loader.
This document is an operation and maintenance manual for Hitachi wheel loaders models 70Z6 and 80Z6 powered by Cummins QSB6.7 engines. It contains sections on safety, components, operation, maintenance, transportation, and specifications. The safety section emphasizes safe work practices including wearing protective equipment, inspecting the machine, avoiding tipping or overloading, and securing the machine for transport. The components section describes the controls, indicators, and features of the operator's cab. The operation section provides instructions for starting, driving, and using the machine. The maintenance section outlines inspection schedules, fluid changes, and service procedures.
This document is an operation and maintenance manual for Hitachi wheel loaders models 70Z6 and 80Z6, powered by Cummins QSB6.7 engines. It contains sections on safety procedures, component identification, operation instructions, maintenance, troubleshooting, specifications, and other technical information for servicing the machines. Safety is the primary focus, with multiple pages outlining hazards and required precautions to prevent injury when operating or working on the loaders.
Kawasaki 70 tm7 wheel loader service repair manual (serial no. 70c6 5001 and up)fujsekksmem
This document provides instructions for disassembling and reassembling a wheel loader. It contains safety precautions and procedures for disassembly, cleaning, inspection, assembly, bleeding air from systems, and releasing pressures. The document is divided into sections covering general information, maintenance standards, specific components of the body, travel system, front attachment, and their groups. Precautions are given for tasks like using floating seals, nylon slings, cleaning, applying lubricants, and ensuring no tools are left inside after reassembly.
Kawasaki 67 z7b wheel loader service repair manual (serial no. 65c5 5001 and up)fujsekksmem
This document is a shop manual that provides specifications, component layout diagrams, and descriptions for a wheel loader. It includes sections on general information, system components, and operation of individual components. The manual aims to provide technical information for maintenance and repair of the machine.
This document is a parts catalog for a wheel loader powered by a Cummins QSB4.5 engine. It contains over 100 pages listing parts organized into sections for periodic replacement parts, engine, cooling device, air intake device, fuel system, exhaust device, hydraulic system, transmission, axles, tires, frame, and chassis. The parts are illustrated with diagrams and specifications to aid in maintenance and repairs.
This document is an operation and maintenance manual for a wheel loader model 67Z7B/67TM7B powered by a Cummins QSB4.5 engine. It contains safety information, instructions for operating the engine and machine, maintenance procedures, troubleshooting steps, specifications, and attachments. The manual instructs operators to read it fully before use and save it on the machine.
Kawasaki 67 z7 67tm7 wheel loader service repair manual (65j5 8001 and up)fujsekksmem
This document provides guidelines and precautions for disassembling and reassembling a wheel loader. It discusses preparing the work area and tools, inspecting the machine beforehand, draining fluids properly, using identification tags, matching marks, and special tools as needed. Proper disassembly and reassembly are important to avoid damage and ensure correct functioning.
Kawasaki 67 z7 67tm7 wheel loader service repair manual (65j5 5001 and up)fujsekksmem
The document provides instructions and safety precautions for disassembling and assembling a wheel loader. It contains sections on general precautions, tightening specifications, painting, bleeding air, and preparing for inspection and maintenance. The general precautions section emphasizes cleaning parts and marking components for reassembly. It also provides guidelines for handling floating seals and nylon slings safely.
This document is an operation and maintenance manual for a wheel loader model 67Z7B/67TM7B powered by a Cummins QSB4.5 engine. It contains safety information, component identification, operating instructions, maintenance procedures, and specifications. The manual instructs operators on safe and proper use of the machine.
This document is a shop manual for wheel loaders models 62Z7, 67Z7, and 67TM7. It contains information on specifications, component layout, systems, component operation, operational performance testing, and troubleshooting. The wheel loaders are powered by an Isuzu 4HK1 engine. The manual includes diagrams, standards, procedures, and safety information to aid technicians in maintenance and repair.
This document contains summaries of two shop manuals for a wheel loader. The first manual covers the function and structure of the loader and includes sections on specifications, component layout, and descriptions of the controller, control systems, hydraulic system, and electrical system. The second manual covers operational performance testing and troubleshooting procedures for the loader. It includes sections on testing standards, engine testing, machine performance testing, component testing, and troubleshooting guides. Both manuals provide technical information for maintenance and repair of the loader.
Kawasaki 60 z7 wheel loader parts catalogue manual (60d1 8001 and up)fujsekksmem
This document is a parts catalog for a wheel loader model 60Z7 powered by a DEUTZ TCD3.6L4 engine. The catalog contains over 500 parts organized into the following sections: power train, engine, cab, chassis, hydraulic system, electric parts, and loader attachment. The parts listed include components of the transmission, cooling system, seats, controls, piping, cylinders, and attachments.
This document provides instructions for removing and installing exhaust and inlet valve guides on Caterpillar 325 excavators. The removal procedure involves using a valve guide driver tool to push the guides out of the cylinder head. For installation, new guides are lubricated and pressed into place using the same tool. Proper cleaning and lubrication are emphasized to prevent contaminants from causing premature wear.
This document provides instructions for removing and installing exhaust manifolds and inlet manifolds on Caterpillar 325-A FM L excavators. It describes removing bolts, studs, and gaskets and installing new gaskets before positioning the manifolds and tightening bolts with the specified torques. It also describes removing and installing inlet and exhaust valves by compressing springs, removing retainers and seals, and installing valves, springs, and retainers in reverse order.
Caterpillar cat 325 l track type excavator (prefix 8nl) service repair manual...fujsekksmem
This document provides instructions for removing and installing a governor and fuel injection control linkage on a Caterpillar 3116 engine. It describes the required tools and parts, presents illustrations of the process, and provides step-by-step instructions including applying lubricant to seals, installing clips and pins, and setting adjustments. Special instructions are referenced for inspecting and modifying specific linkage components.
Caterpillar cat 325 l track type excavator (prefix 8jg) service repair manual...fujsekksmem
This document provides instructions for removing and installing an exhaust manifold on a 325-A excavator. The removal procedure involves removing bolts and gaskets from the cylinder head assembly. The installation procedure describes applying anti-seize compound, installing new gaskets and bolts, and tightening the bolts in a specific sequence. Tools required are also listed.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
8. INTRODUCTION
Foreword - Important notice regarding equipment servicing
D150C WE
All repair and maintenance work listed in this manual must be carried out only by qualified dealership personnel,
strictly complying with the instructions given, and using, whenever possible, the special tools.
Anyone who performs repair and maintenance operations without complying with the procedures provided herein
shall be responsible for any subsequent damages.
The manufacturer and all the organizations of its distribution chain, including - without limitation - national, regional, or
local dealers, reject any responsibility for damages caused by parts and/or components not approved by the manu-
facturer, including those used for the servicing or repair of the product manufactured or marketed by the manufacturer.
In any case, no warranty is given or attributed on the product manufactured or marketed by the manufacturer in case
of damages caused by parts and/or components not approved by the manufacturer.
The manufacturer reserves the right to make improvements in design and changes in specifications at any time without
notice and without incurring any obligation to install them on units previously sold. Specifications, descriptions, and
illustrative material herein are as accurate as known at time of publication but are subject to change without notice.
In case of questions, refer to your NEW HOLLAND CONSTRUCTION Sales and Service Networks.
47907876 06/10/2015
3
9. INTRODUCTION
Safety rules
D150C WE
Personal safety
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid possible death or injury.
Throughout this manual you will find the signal words DANGER, WARNING, and CAUTION followed by special in-
structions. These precautions are intended for the personal safety of you and those working with you.
Read and understand all the safety messages in this manual before you operate or service the machine.
DANGER indicates a hazardous situation that, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation that, if not avoided, could result in death or serious injury.
CAUTION indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.
FAILURE TO FOLLOW DANGER, WARNING, AND CAUTION MESSAGES COULD RESULT
IN DEATH OR SERIOUS INJURY.
Machine safety
NOTICE: Notice indicates a situation that, if not avoided, could result in machine or property damage.
Throughout this manual you will find the signal word Notice followed by special instructions to prevent machine or
property damage. The word Notice is used to address practices not related to personal safety.
Information
NOTE: Note indicates additional information that clarifies steps, procedures, or other information in this manual.
Throughout this manual you will find the word Note followed by additional information about a step, procedure, or
other information in the manual. The word Note is not intended to address personal safety or property damage.
47907876 06/10/2015
4
10. INTRODUCTION
Safety rules - Ecology and the environment
D150C WE
Soil, air, and water quality is important for all industries and life in general. When legislation does not yet rule the
treatment of some of the substances that advanced technology requires, sound judgment should govern the use and
disposal of products of a chemical and petrochemical nature.
Familiarize yourself with the relative legislation applicable to your country, and make sure that you understand this
legislation. Where no legislation exists, obtain information from suppliers of oils, filters, batteries, fuels, anti-freeze,
cleaning agents, etc., with regard to the effect of these substances on man and nature and how to safely store, use,
and dispose of these substances.
Helpful hints
• Avoid the use of cans or other inappropriate pressurized fuel delivery systems to fill tanks. Such delivery systems
may cause considerable spillage.
• In general, avoid skin contact with all fuels, oils, acids, solvents, etc. Most of these products contain substances
that may be harmful to your health.
• Modern oils contain additives. Do not burn contaminated fuels and or waste oils in ordinary heating systems.
• Avoid spillage when you drain fluids such as used engine coolant mixtures, engine oil, hydraulic fluid, brake fluid,
etc. Do not mix drained brake fluids or fuels with lubricants. Store all drained fluids safely until you can dispose of
the fluids in a proper way that complies with all local legislation and available resources.
• Do not allow coolant mixtures to get into the soil. Collect and dispose of coolant mixtures properly.
• The air-conditioning system contains gases that should not be released into the atmosphere. Consult an air-condi-
tioning specialist or use a special extractor to recharge the system properly.
• Repair any leaks or defects in the engine cooling system or hydraulic system immediately.
• Do not increase the pressure in a pressurized circuit as this may lead to a component failure.
• Protect hoses during welding. Penetrating weld splatter may burn a hole or weaken hoses, allowing the loss of oils,
coolant, etc.
Battery recycling
Batteries and electric accumulators contain several substances that can have a harmful
effect on the environment if the batteries are not properly recycled after use. Improper
disposal of batteries can contaminate the soil, groundwater, and waterways. NEW
HOLLAND CONSTRUCTION strongly recommends that you return all used batteries to a
NEW HOLLAND CONSTRUCTION dealer, who will dispose of the used batteries or recycle
the used batteries properly. In some countries, this is a legal requirement.
Mandatory battery recycling
NOTE: The following requirements are mandatory in Brazil.
Batteries are made of lead plates and a sulfuric acid solution. Because batteries contain heavy metals such as lead,
CONAMA Resolution 401/2008 requires you to return all used batteries to the battery dealer when you replace any
batteries. Do not dispose of batteries in your household garbage.
Points of sale are obliged to:
• Accept the return of your used batteries
• Store the returned batteries in a suitable location
• Send the returned batteries to the battery manufacturer for recycling
47907876 06/10/2015
5
11. SERVICE MANUAL
Engine
D150C Extra Long Track (XLT), Bulldozer (BD) Blade [NDDC15000 - ] , D150C
Extra Long Track (XLT), Bulldozer (BD) Blade [NEDC15000 - ] , D150C Extra
Long Track (XLT), Bulldozer (BD) Blade [NFDC15000 - ] , D150C Extra Long
Track (XLT), Power Angle Tilt (PAT) Blade [NDDC15000 - ] , D150C Extra Long
Track (XLT), Power Angle Tilt (PAT) Blade [NEDC15000 - ] , D150C Extra Long
Track (XLT), Power Angle Tilt (PAT) Blade [NFDC15000 - ] , D150C Wide Track
(WT) / Low Ground Pressure (LGP), Power Angle Tilt (PAT) Blade [NDDC15000
- ] , D150C Wide Track (WT) / Low Ground Pressure (LGP), Power Angle Tilt
(PAT) Blade [NEDC15000 - ] , D150C Wide Track (WT) / Low Ground Pressure
(LGP), Power Angle Tilt (PAT) Blade [NFDC15000 - ]
47907876 06/10/2015
10
12. Engine - Engine and crankcase
Engine - Assemble - Driveshaft alignment, engine and tandem
pumps
D150C WE
RAIL13DOZ1485FA 1
Item Description
1 Shaft center to center 9:30 hole
2 Shaft center to center 2:30 hole
3 Flywheel housing
4 Pump shaft
NOTE: All instructions specified are from the perspective of someone sitting in the operator’s seat, facing the blade.
1. Angle of the driveshaft is 4.85 °.
2. Coming off the pump shaft centerline, the driveshaft is
angled up 4.07 ° and to the left 2.63 °.
3. The distance from the flywheel housing to the pump
mounting bracket is 176.00 mm (6.93 in)
47907876 06/10/2015
10.1 [10.001] / 4
13. Engine - Air cleaners and lines
Air cleaner - Remove
D150C WE
1. Park the machine on a firm level surface.
RAIL12DOZ0403AA 1
2. Lower the blade and the ripper tool (if so equipped).
3. Engage the parking brake and turn the ignition key to
the OFF position.
4. Locate the battery master disconnect switch behind the
panel on the left side of the cab.
RAIL12DOZ0403AA 2
5. Switch the master battery disconnect switch to the OFF
position.
RAPH12DOZ0044AA 3
NOTE: Wait 90 seconds after engine shutdown before turning off battery disconnect. After engine shutdown, the
Selective Catalytic Reduction (SCR) system does a purge cycle and the supply module continues to run.
47907876 06/10/2015
10.2 [10.202] / 3
14. Engine - Air cleaners and lines
6. Open the left hand side engine compartment access
door.
RAIL12DOZ0832BA 4
7. Locate the engine air intake filter housing.
RAIL12DOZ0833BA 5
8. Release the retaining clips and remove the engine air
intake filter housing cover.
RAIL12DOZ0834BA 6
47907876 06/10/2015
10.2 [10.202] / 4
15. Engine - Air cleaners and lines
9. Remove the primary air filter element.
RAIL12DOZ0835BA 7
10. Remove the secondary air filter element.
RAIL12DOZ0837BA 8
11. Remove any additional debris from inside the engine
air intake filter housing before installing the air filter
elements.
RAIL12DOZ0839BA 9
Next operation:
Air cleaner - Install (10.202)
47907876 06/10/2015
10.2 [10.202] / 5
16. Engine - Air cleaners and lines
Air cleaner - Install
D150C WE
Prior operation:
Air cleaner - Remove (10.202)
1. Install the secondary air filter element into the air filter
housing.
RAIL12DOZ0838BA 1
2. Install the primary air filter element into the air filter
housing.
RAIL12DOZ0836BA 2
3. Attach the engine air intake filter housing cover.
RAIL12DOZ0840BA 3
47907876 06/10/2015
10.2 [10.202] / 6
17. Engine - Air cleaners and lines
4. Secure the retaining clips which hold the engine air in-
take filter housing cover in place.
RAIL12DOZ0834BA 4
NOTE: Make sure that the engine air intake filter housing and forms a tight seal with the cover.
5. Close the left side engine compartment panel and se-
cure it with the latch.
RAIL12DOZ0832BA 5
6. Switch the master battery disconnect switch to the ON
position.
RAPH12DOZ0044AA 6
47907876 06/10/2015
10.2 [10.202] / 7
18. Engine - Air cleaners and lines
7. Close the panel on the left side of the machine below
the cab and secure the latch.
RAIL12DOZ0403AA 7
8. Start the engine and confirm normal operations. Re-
move any fault codes from the system.
47907876 06/10/2015
10.2 [10.202] / 8
19. Engine - Fuel filters
Fuel filters - Replace
D150C WE
WARNING
Fire hazard!
When handling diesel fuel, observe the following precautions:
1. Do not smoke.
2. Never fill the tank when the engine is running.
3. Wipe up spilled fuel immediately.
Failure to comply could result in death or serious injury.
W0099A
Prior operation:
Keep all unauthorized personnel clear of the area. Park the machine on level ground, in neutral with the parking brake
applied, and the attachment lowered to the ground, turn off the engine, remove the key, and verify that engine com-
ponents have cooled or avoid contact. Make sure that all residual pressure is relieved from circuits before beginning
maintenance.
1. Locate the fuel filter in the right rear access compart-
ment. Close the fuel shut off valve (1) to prevent fuel
leakage.
2. Clean the fuel filter head, the outside of the fuel filter,
and remove any dirt and debris around the area that
might contaminate the system.
RAIL13DOZ1594AA 1
3. Turn the fuel filter (2) counterclockwise and remove.
Capture any fuel remaining in the lines or the fuel filter,
and discard properly.
4. Apply a thin layer of clean oil to the gasket on the new
fuel filter.
5. Install the filter. Use your hands to tighten the fuel filter
1/2 to 3/4 turn after the fuel filter makes contact with the
filter head.
6. Open the fuel shut off valve. Check for leaks.
RAIL13DOZ1594AA 2
NOTICE: Never use a filter wrench to tighten a new fuel filter on install.
47907876 06/10/2015
10.3 [10.206] / 3
20. Engine - Fuel filters
Removing air from the fuel system
1. Remove air from the fuel system after changing the fuel
filter. Removing air from the fuel system may also be
necessary if the machine runs out of fuel, if the fuel
system has been serviced, or if the machine has been
in storage.
2. Make certain that the fuel tank shutoff is in the ON po-
sition.
3. Loosen the air bleed screw one or two turns.
4. Operate the hand primer until no air bubbles flow from
around the air bleed screw.
5. Tighten the air bleed screw.
6. Start the engine, and check for leaks.
RAPH12DOZ0056AA 3
47907876 06/10/2015
10.3 [10.206] / 4
21. Engine - Fuel tanks
Fuel tank - Remove
D150C WE
1. Park machine on a firm, level surface.
2. Lower all equipment to the ground.
3. Engage parking brake and shut engine off.
4. Relieve system of hydraulic pressure by actuating all
hydraulic functions. Remove key when complete.
NOTE: Wait 90 seconds after engine shutdown before turning master battery disconnect switch OFF. After engine
shutdown, the Selective Catalytic Reduction (SCR) system module continues to run and conducts a purge cycle.
5. Turn master battery disconnect switch to the OFF po-
sition.
6. Remove cab from machine. See Cab and platform -
Remove (90.150).
7. Remove DEF/AdBlue tank. See Diesel Exhaust Fluid
(DEF)/AdBlue® tank - Remove (10.500).
8. Drain fuel tank.
9. Remove fuel drain hose (1).
NOTE: DEF/AdBlue tank shown installed.
10. Remove fuel hoses and electrical connectors (2) from
top of fuel tank.
RAIL12DOZ0731BA 1
NOTICE: Fuel tank weighs approximately 91 kg (200 lb). Use proper lifting equipment to prevent personal injury or
property damage.
11. Attach an appropriate lifting device to fuel tank.
12. Remove fuel tank strap (1) and remove fuel tank.
NOTE: DEF/AdBlue tank shown installed.
RAIL12DOZ0735BA 2
13. Repair or replace components as necessary.
47907876 06/10/2015
10.4 [10.216] / 3
22. Engine - Fuel tanks
Fuel tank - Install
D150C WE
NOTICE: Fuel tank weighs approximately 91 kg (200 lb) empty. Use proper lifting equipment to prevent personal
injury or property damage.
1. Attach an appropriate lifting device to fuel tank.
2. Place fuel tank in machine.
3. Install fuel tank strap (1).
NOTE: DEF/AdBlue tank shown installed.
RAIL12DOZ0735BA 1
4. Remove lifting device from fuel tank.
5. Install fuel hoses and electrical connectors (1) to top of
fuel tank.
NOTE: DEF/AdBlue tank shown installed.
6. Install fuel drain hose (2) to tank.
RAIL12DOZ0731BA 2
7. Install DEF/AdBlue tank. See Diesel Exhaust Fluid
(DEF)/AdBlue® tank - Install (10.500).
8. Install cab. See Cab and platform - Install (90.150).
47907876 06/10/2015
10.4 [10.216] / 4
23. Engine - Engine lubrication system
Engine oil filter - Replace
D150C WE
Prior operation:
Keep all unauthorized personnel clear of the area. Park the machine on level ground, in neutral with the parking brake
applied, and the attachment lowered to the ground, turn off the engine, remove the key, and verify that engine com-
ponents have cooled or avoid contact. Make sure that all residual pressure is relieved from circuits before beginning
maintenance.
Service specifications
Type of oil NEW HOLLAND AMBRA UNITEK MASTERGOLD SBL
CJ-4 SAE 10W-40
Capacity (with filter change) 16.4 l (17.3 US qt)
Capacity (without filter change) 15.6 l (16.5 US qt)
1. Open the left-hand front and right-hand front access
doors. Secure the access doors with the door struts
(1).
2. Remove the oil dipstick and the oil fill cap.
NOTE: Oil drains faster when the oil is warm (but not hot)
and the oil dipstick and oil fill cap is removed.
3. Use a suitable container to collect the drained oil.
RAPH12DOZ0068AA 1
4. Remove the bolts and the engine oil access plate under
the engine. Locate the oil drain plug.
RAPH12DOZ0095AA 2
NOTE: If the machine is so equipped, and the special draining equipment is available, use the engine oil environmen-
tal drain located in the left side engine access door.
5. Remove the engine oil drain plug (2), and allow the oil
to drain.
RAPH12DOZ0096AA 3
47907876 06/10/2015
10.5 [10.304] / 3
24. Engine - Engine lubrication system
6. Locate the oil filter (3) in the right front engine compart-
ment. Clean the area around the filter of dirt and debris.
RAIL12DOZ0192AA 4
Replace oil filter
7. Turn the oil filter (3) housing counterclockwise to re-
move. Remove and discard the filter following local en-
vironmental and waste regulations.
8. Apply a thin layer of clean oil to the new filter gasket.
9. Turn the new oil filter onto the base until the gasket
makes contact with the base, and then turn by hand an
additional 3/4 turn. Never use a filter wrench to install
a new filter.
RAIL12DOZ0192AA 5
10. Close the oil drain.
11. Fill the engine with the proper amount of oil through
the fill port (4).
12. Start the engine and run at idle speed. Check the
engine oil filter and remote drain for leaks.
13. After 2 min stop the engine.
14. Wait for the engine oil to drain down for an accurate
reading on the dipstick (5).
RAPH12DOZ0069AA 6
47907876 06/10/2015
10.5 [10.304] / 4
25. Engine - Engine lubrication system
15. Check the dipstick (5), and add additional oil, if nec-
essary.
16. Check for leaks around the filter and drain.
17. Secure the lower engine access plate.
RAIL12DOZ0171AA 7
NOTE: The oil flow rate can be improved if the oil is slightly warm and the oil fill cap or dipstick is removed from the
engine while draining.
47907876 06/10/2015
10.5 [10.304] / 5
26. Engine - Engine lubrication system
Crankcase ventilation system - Remove
D150C WE
1. Park the Dozer on level ground. Lower the blade to the
ground and turn OFF the engine.
RAPH12DOZ0102AA 1
2. Turn the electrical power to OFF.
3. Remove the left side cover plate.
RAPH12DOZ0068AA 2
4. Remove the right side cover plate.
RAPH12DOZ0066AA 3
47907876 06/10/2015
10.5 [10.304] / 6
27. Engine - Engine lubrication system
5. Disconnect the electrical plug (1) at the filter restriction
valve.
6. Loosen the inner hose clamp (2) and slide the hose (3)
off the air cleaner.
RAPH12DOZ0248AA 4
7. On left side of machine, loosen the intake clamp (1) and
the aspiration tube clamp (2).
RAPH12DOZ0251AA 5
8. Disconnect the hoses from the air cleaner.
RAPH12DOZ0254AA 6
9. Remove the three bolts from the bracket holding the air
cleaner in place.
RAPH12DOZ0252AA 7
47907876 06/10/2015
10.5 [10.304] / 7
28. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
29. Engine - Engine lubrication system
10. Remove the air cleaner from the machine.
RAPH12DOZ0255AA 8
11. Open the junction block fuse cover (1).
ATTENTION: Power MUST be off before accessing the
junction block fuses.
RAPH12DOZ0260AA 9
12. Disconnect the inside cable (1). Remove the two bolts
holding the bracket (2) to the cross member frame.
Pull bracket away from the frame.
RAPH12DOZ0308AA 10
13. Loosen the clamp and remove the vent tube from the
valve cover.
RAPH12DOZ0257AA 11
47907876 06/10/2015
10.5 [10.304] / 8
30. Engine - Engine lubrication system
14. Remove the six nut and washer assemblies (1) from
the valve cover.
RAPH12DOZ0258AA 12
15. Remove the valve cover.
RAPH12DOZ0261AA 13
16. Remove the vent hose from the valve cover.
RAPH12DOZ0263AA 14
17. Remove the thumb nut and spring washer from the
valve cover.
RAPH12DOZ0288AA 15
47907876 06/10/2015
10.5 [10.304] / 9
31. Engine - Engine lubrication system
18. Turn the valve cover over and remove the three
screws from the foam filter assembly.
RAPH12DOZ0285AA 16
19. Turn the valve cover over and press the vent system
out of the valve cover.
RAPH12DOZ0291AA 17
20. Separate the canister from the foam filter.
RAPH12DOZ0294AA 18
21. Open the foam filter assembly.
RAPH12DOZ0278AA 19
47907876 06/10/2015
10.5 [10.304] / 10
32. Engine - Engine lubrication system
22. Remove and clean the foam filter.
RAPH12DOZ0295AA 20
Next operation:
Crankcase ventilation system - Install (10.304)
47907876 06/10/2015
10.5 [10.304] / 11
33. Engine - Engine lubrication system
Crankcase ventilation system - Install
D150C WE
1. Place the clean foam filter back in the filter holder.
RAPH12DOZ0296AA 1
2. Align the foam filter housing to the guide pegs on the
filter assembly and snap in place.
RAPH12DOZ0278AA 2
3. Reattach the canister to the foam filter assembly.
RAPH12DOZ0300AA 3
4. With the foam filter facing up, line up the valve system
to the openings in the valve cover.
RAPH12DOZ0302AA 4
47907876 06/10/2015
10.5 [10.304] / 12
34. Engine - Engine lubrication system
5. Press in place.
RAPH12DOZ0303AA 5
6. Reinsert the three screws into the foam filter assembly.
RAPH12DOZ0285AA 6
7. Turn the valve cover over and reinstall he ‘keep clean’
vent cover on the foam filter outlet.
RAPH12DOZ0292AA 7
8. Place the spring washer onto the vent hose opening.
RAPH12DOZ0290AA 8
47907876 06/10/2015
10.5 [10.304] / 13
35. Engine - Engine lubrication system
9. Reinstall the thumb nut and tighten.
RAPH12DOZ0288AA 9
10. Insert the vent hose through the thumb nut and turn
the hose slightly to the right, locking in the tabs.
RAPH12DOZ0264AA 10
11. Line up the valve cover to the six stud screws (S).
Stud screws location
RAPH12DOZ0262AA 11
Valve cover
RAPH12DOZ0261AA 12
12. Insert a washer and nut over each of the stud screws.
RAPH12DOZ0305AA 13
47907876 06/10/2015
10.5 [10.304] / 14
36. Engine - Engine lubrication system
13. Fasten securely.
RAPH12DOZ0258AA 14
14. Insert the vent tube (1) into the vent hose (2) and
tighten the clamp (3) in place.
RAPH12DOZ0257AA 15
15. Line up the bracket holes to the cross member frame.
RAPH12DOZ0306AA 16
16. Insert one bolt through the p-clamp and into the inner
bracket bolt hole (1). Insert the second bolt (2) into
the other bracket hole. Securely tighten.
17. Reattach the cable (3) to the block fuse.
RAPH12DOZ0307AA 17
47907876 06/10/2015
10.5 [10.304] / 15