This document is a repair manual for New Holland tractors models 5610S, 6610S, 7610S, 7010, and 8010. It contains sections covering various tractor systems and components such as the engine, transmission, brakes, hydraulics, and electrical systems. The document provides a table of contents listing the section numbers and titles for the repair manual. It also contains safety and health precautions to follow when working with hazardous materials that may be encountered during tractor repair.
New holland tb100 tractor service repair manualfujsekfksmemf
This document is a repair manual for CNH America LLC tractors models TB100, TB110, TB120, and TB120 Mudder. It contains sections on general information, the engine, clutch, transmission systems, front axle, rear wheel drive, power take-off, braking system, hydraulic system, steering system, front axle, and electrical systems. Each section provides chapters on repair and maintenance for the corresponding vehicle systems. Safety precautions are outlined for working with hazardous materials and performing various maintenance and repair tasks.
Case ih jx95 straddle mount service repair manualjfjskeksemm
This document outlines health and safety precautions for working with hazardous materials and performing repairs. It provides guidance on proper handling of acids, solvents, welding equipment, suspended loads and other potentially dangerous items. Precautions are given for electrical shock, fire, dust and more. Repair technicians are advised to follow all safety instructions, use recommended equipment, and seek first aid for any exposures.
Case ih farmall 65 c tractor service repair manualfusjejfjskekme
This document contains a chapter on health and safety from a maintenance manual. It lists various hazardous operations and materials associated with vehicle maintenance and repair. These include acids, solvents, welding, dusts, and more. For each item, precautions are identified to avoid health and safety risks when working with these substances or performing certain tasks. The document emphasizes that all maintenance and repair procedures should prioritize health and safety.
New holland tt45 a tractor service repair manualfdjsuekskefmm
The document is a repair manual for CNH America LLC tractors models TT45A and TT50A. It contains sections on the engine, transmission, braking system, hydraulics, steering and other mechanical systems of the tractors. The manual provides instructions for maintenance, repair, safety procedures and specifications for the tractors. It includes warnings about only allowing qualified technicians to perform repairs and properly following safety procedures when operating or servicing the tractors.
Case ih jx1090 u tractor service repair manualufjjsjefkkekmme
This document provides health and safety precautions and guidelines for working with various hazardous materials that may be encountered when repairing agricultural equipment, such as acids, alkalis, solvents, dusts, fumes, and fire risks. It outlines dos and don'ts, and what to do in emergency situations requiring first aid. Protective equipment is recommended, and handling, storage and disposal of hazardous substances should follow legal regulations.
This document is the repair manual for MXM120, MXM130, MXM140, MXM155, MXM175, and MXM190 tractors. It contains sections covering the engine, clutch, transmission, drive lines, front and rear axles, brakes, hydraulic system, steering, auxiliary units, electrical system, and cab. The manual provides instructions for maintenance and repair work to be performed exclusively by trained technicians and warns of safety precautions for working on equipment.
This DNV document outlines the technical standards, as developed by DNV, aimed at floating gas temrinals. Similar standards can be found in DNV.COM website, under "Resources".
New holland tb120 tractor service repair manualfdujsjeksemm
This document contains a repair manual for CNH America LLC tractors models TB100, TB110, TB120, and TB120 Mudder. The manual is organized into multiple sections covering different vehicle systems. Section topics include the engine, clutch, transmission, front axle, rear axle, braking system, hydraulics, steering, electrical systems, and others. The document provides an overview of the manual's contents and organization to aid technicians in locating information for repairs.
New holland tb100 tractor service repair manualfujsekfksmemf
This document is a repair manual for CNH America LLC tractors models TB100, TB110, TB120, and TB120 Mudder. It contains sections on general information, the engine, clutch, transmission systems, front axle, rear wheel drive, power take-off, braking system, hydraulic system, steering system, front axle, and electrical systems. Each section provides chapters on repair and maintenance for the corresponding vehicle systems. Safety precautions are outlined for working with hazardous materials and performing various maintenance and repair tasks.
Case ih jx95 straddle mount service repair manualjfjskeksemm
This document outlines health and safety precautions for working with hazardous materials and performing repairs. It provides guidance on proper handling of acids, solvents, welding equipment, suspended loads and other potentially dangerous items. Precautions are given for electrical shock, fire, dust and more. Repair technicians are advised to follow all safety instructions, use recommended equipment, and seek first aid for any exposures.
Case ih farmall 65 c tractor service repair manualfusjejfjskekme
This document contains a chapter on health and safety from a maintenance manual. It lists various hazardous operations and materials associated with vehicle maintenance and repair. These include acids, solvents, welding, dusts, and more. For each item, precautions are identified to avoid health and safety risks when working with these substances or performing certain tasks. The document emphasizes that all maintenance and repair procedures should prioritize health and safety.
New holland tt45 a tractor service repair manualfdjsuekskefmm
The document is a repair manual for CNH America LLC tractors models TT45A and TT50A. It contains sections on the engine, transmission, braking system, hydraulics, steering and other mechanical systems of the tractors. The manual provides instructions for maintenance, repair, safety procedures and specifications for the tractors. It includes warnings about only allowing qualified technicians to perform repairs and properly following safety procedures when operating or servicing the tractors.
Case ih jx1090 u tractor service repair manualufjjsjefkkekmme
This document provides health and safety precautions and guidelines for working with various hazardous materials that may be encountered when repairing agricultural equipment, such as acids, alkalis, solvents, dusts, fumes, and fire risks. It outlines dos and don'ts, and what to do in emergency situations requiring first aid. Protective equipment is recommended, and handling, storage and disposal of hazardous substances should follow legal regulations.
This document is the repair manual for MXM120, MXM130, MXM140, MXM155, MXM175, and MXM190 tractors. It contains sections covering the engine, clutch, transmission, drive lines, front and rear axles, brakes, hydraulic system, steering, auxiliary units, electrical system, and cab. The manual provides instructions for maintenance and repair work to be performed exclusively by trained technicians and warns of safety precautions for working on equipment.
This DNV document outlines the technical standards, as developed by DNV, aimed at floating gas temrinals. Similar standards can be found in DNV.COM website, under "Resources".
New holland tb120 tractor service repair manualfdujsjeksemm
This document contains a repair manual for CNH America LLC tractors models TB100, TB110, TB120, and TB120 Mudder. The manual is organized into multiple sections covering different vehicle systems. Section topics include the engine, clutch, transmission, front axle, rear axle, braking system, hydraulics, steering, electrical systems, and others. The document provides an overview of the manual's contents and organization to aid technicians in locating information for repairs.
New holland tb110 tractor service repair manualfdujsjeksemm
This document is a repair manual for CNH America LLC tractors models TB100, TB110, TB120, and TB120 Mudder. It contains sections on general information, the engine, clutch, transmission systems, front axle, rear wheel drive, power take-off, braking system, hydraulic system, steering system, front axle, and electrical systems. Each section provides chapters detailing repairs, specifications, and procedures for the corresponding vehicle systems. Health and safety precautions are outlined for various hazardous materials and operations involved in vehicle maintenance and repair.
New holland tb100 tractor service repair manualjfkskemwsxmdm
This document contains a repair manual for CNH America LLC tractors models TB100, TB110, TB120, and TB120 Mudder. The manual contains sections on general information, the engine, clutch, transmission systems, front axle, rear wheel drive, power take-off, braking system, hydraulic system, steering system, front axle, and electrical systems. Each section provides chapters detailing repairs, specifications, and procedures for the corresponding vehicle systems. Safety precautions for working with hazardous materials like acids, solvents, welding equipment, and suspended loads are also outlined.
Case ih farmall 65 c tractor service repair manualfjjskeknjufksemm
The document discusses health and safety precautions for working with hazardous materials and equipment when maintaining and repairing vehicles. It provides an alphabetical list of various hazards such as acids, batteries, dusts, exhaust fumes, fires, solvents, suspended loads, and welding. For each hazard, it identifies the associated risks and necessary precautions to avoid injury or damage. The purpose is to inform technicians about handling different chemicals, gases, and operations safely.
Case ih farmall 75 c tractor service repair manualfjjskeknjufksemm
The document contains a chapter on health and safety precautions for vehicle maintenance and repair. It lists various hazardous operations and materials alphabetically, such as acids, batteries, fuels, solvents, welding, etc. and identifies the associated health risks. Precautions are provided to avoid risks when working with these substances and performing different procedures. The document aims to inform technicians about handling health and safety issues during maintenance and repair work.
Case ih farmall 85 c tractor service repair manualfjjskeknjufksemm
The document contains a chapter on health and safety precautions for vehicle maintenance and repair. It lists various hazardous operations, materials, and equipment in alphabetical order. For each item, it identifies the associated health risks and provides precautions to avoid hazards when working with things like acids, batteries, welding equipment, solvents, suspended loads, and more. The goal is to inform repair technicians about safety measures for common procedures and chemicals to help prevent injuries.
Case ih farmall 95 c tractor service repair manualfjjskekskem
The document provides health and safety guidelines for working with various chemicals and materials, including acids, solvents, fuels, dusts, and welding equipment. It lists precautions to take when using these substances, such as proper ventilation, protective equipment, and first aid measures. Hazards including fire, electric shock, inhalation, and skin and eye contact are described. The document also notes the need to follow legal requirements when handling chemicals.
Case ih farmall 75 c tractor service repair manualfusjejfjskekme
The document provides guidance on health and safety precautions for working with various chemicals and materials. It lists chemicals such as acids, alkalis, solvents, fuels and discusses related hazards. It also provides do's and don'ts for safe handling of these materials, and addresses issues like fire, electric shock, dusts and fumes. Instructions are given for first aid and legal compliance when working with chemicals.
Case ih farmall 95 c tractor service repair manualfjjjskekksmem
The document provides guidance on health and safety precautions for working with various chemicals and materials. It lists chemicals such as acids, alkalis, solvents, fuels and discusses related hazards. It also provides instructions on proper handling of these materials, recommended personal protective equipment, first aid measures and legal compliance. Work should only be carried out by authorized personnel following all safety instructions to prevent injury or property damage.
Case ih jx95 straddle mount service repair manualfjskekmsemmwe
This document provides guidance on health and safety precautions for working with various hazardous materials that may be encountered when repairing tractors and their components. It lists numerous chemicals, processes, and situations requiring safety measures, such as acids, solvents, welding, dust, and electricity. Precautions include proper ventilation, protective equipment, first aid procedures, and legal compliance. The document aims to inform repair technicians about handling materials safely to prevent injury or damage.
Case ih jx95 straddle mount service repair manualjfdjjskfkksmemm
This document outlines health and safety precautions for working with various chemicals and materials that may be encountered during tractor repair, such as acids, alkalis, solvents, paints, fuels, dusts, and welding materials. It provides guidance on proper handling and storage of hazardous substances, necessary personal protective equipment, first aid measures, and legal compliance. Work should only be performed by authorized personnel who carefully follow all safety instructions to prevent injury and property damage.
New holland cr970 combine harvesters service repair manualfhsjejfksemm
This document is a repair manual for New Holland combines models CR920 through CR980. It provides repair instructions organized into sections covering the engine, transmission, hydraulics, electrical systems, threshing, cleaning, and other major systems. Safety precautions are outlined, noting hazards from chemicals, dust, electricity, and other factors. Proper service methods and repair procedures are emphasized to ensure safety and reliable machine operation.
New holland cr960 combine harvesters service repair manual instant downloadufjjsjekksekmm
This document is a repair manual for New Holland combines models CR920 through CR980. It provides repair instructions organized into sections covering the engine, transmission, hydraulics, electrical systems, harvesting components, and other areas of the combines. Safety precautions are outlined, and general information is provided on product identification, torque specifications, fittings, lubrication, and sealants to aid in repairs.
New holland tc29 d tractor service repair manualfujsekfksmemf
This document is the contents page for a repair manual covering various tractor models. It lists 12 sections that provide information on different vehicle systems, including the engine, fuel, electrical, transmission and hydraulic systems, as well as steering, axles, wheels and separating the tractor. The document encourages downloading the full repair manual.
New holland tc25 tractor service repair manualfujsekfksmemf
This document is the contents page for a repair manual covering various tractor models. It lists 12 sections that provide information on different vehicle systems, including the engine, fuel, electrical, transmission and hydraulic systems, as well as steering, axles, wheels and separating the tractor. The document encourages downloading the full repair manual.
New holland rustler 125 service repair manualfujsekfksmemf
This document is a 2010 service manual for New Holland Rustler 125 gasoline and 120 diesel vehicles. It provides instructions for maintenance and repair procedures to technicians. Proper maintenance is essential for maximum performance and safe operation of the vehicles. The manual covers all aspects of typical vehicle service but contact the dealer if additional assistance is needed.
New holland rustler 120 service repair manualfujsekfksmemf
This service manual provides instructions for maintenance and repair of New Holland Rustler 120 and 125 vehicles. It covers all aspects of typical vehicle service, including safety procedures, vehicle specifications, general maintenance, body components, brake and suspension systems, wheels and tires, troubleshooting, and electrical components. Technicians should thoroughly review this manual, especially safety information, before servicing vehicles.
New holland mz18 h zero turn lawn mower service repair manualfujsekfksmemf
This repair manual provides information for repairing the MZ14H, MZ16H, and MZ18H zero radius tractors. The manual contains 7 sections that cover general information, the transaxle, chassis, mower decks, and electrical systems. Specifications for each model are provided, including engine details, dimensions, deck sizes, and other mechanical features. Safety warnings are given at the beginning to remind technicians to avoid injuries while servicing equipment.
New holland my19 riding mower service repair manualfujsekfksmemf
This repair manual covers New Holland garden tractors from model years 2016-2017 and 2019. It contains 7 sections on general information, model identification, greasing/lubrication, transaxles, chassis, mower decks, and electrical systems. The sections provide specifications, safety information, and repair procedures for the tractors.
New holland engine 9.0 l 6 cylinder, 24 valve cnh engine with high pressure c...fujsekfksmemf
The document is a repair manual that provides information on servicing New Holland 8.3 & 9.0L 6 cylinder engines with high pressure common rail fuel systems. It includes sections on the engine, fuel and injection system, air intake system, exhaust system, cooling system, lubrication system, and starting system. The manual uses an integrated coding environment to organize information and point to specific sections, chapters, and sub-chapters. It provides exploded views, specifications, torque values, service limits, inspection procedures, and special tool requirements for servicing engine components.
Kubota v3800 cr-tie4 c diesel engine service repair manualfujsekfksmemf
The document provides information on safely servicing and operating diesel engines. It outlines important safety precautions including reading all instructions before starting work, parking the machine securely, disconnecting the battery, and wearing protective equipment. Specific hazards are identified such as hot surfaces that can cause burns, high pressure fuel and hydraulic lines, and ensuring good ventilation when the engine is running due to carbon monoxide in the exhaust.
This document provides instructions for removing and installing the fuel injection pump housing and governor on Caterpillar 3304B and 3306B engines. The removal procedure involves disconnecting fuel lines and other components, then using lifting equipment to remove the housing due to its weight. The installation procedure describes preparing the housing components and placing them back on the engine, ensuring proper timing of the fuel injection pumps.
Caterpillar cat d8 n track type tractor dozer bulldozer (prefix 1xj) service ...fujsekfksmemf
This document provides instructions for removing and installing the rear gear group and flywheel on a Caterpillar D8N track-type tractor with a 3406 engine. The removal procedure involves using tools to remove 11 components in 9 steps, including gears, covers, seals, and bearings. The installation procedure provides instructions to install 14 components in 12 steps, noting the proper orientation and temperature treatment of bearings.
More Related Content
Similar to New holland 7010 tractor service repair manual
New holland tb110 tractor service repair manualfdujsjeksemm
This document is a repair manual for CNH America LLC tractors models TB100, TB110, TB120, and TB120 Mudder. It contains sections on general information, the engine, clutch, transmission systems, front axle, rear wheel drive, power take-off, braking system, hydraulic system, steering system, front axle, and electrical systems. Each section provides chapters detailing repairs, specifications, and procedures for the corresponding vehicle systems. Health and safety precautions are outlined for various hazardous materials and operations involved in vehicle maintenance and repair.
New holland tb100 tractor service repair manualjfkskemwsxmdm
This document contains a repair manual for CNH America LLC tractors models TB100, TB110, TB120, and TB120 Mudder. The manual contains sections on general information, the engine, clutch, transmission systems, front axle, rear wheel drive, power take-off, braking system, hydraulic system, steering system, front axle, and electrical systems. Each section provides chapters detailing repairs, specifications, and procedures for the corresponding vehicle systems. Safety precautions for working with hazardous materials like acids, solvents, welding equipment, and suspended loads are also outlined.
Case ih farmall 65 c tractor service repair manualfjjskeknjufksemm
The document discusses health and safety precautions for working with hazardous materials and equipment when maintaining and repairing vehicles. It provides an alphabetical list of various hazards such as acids, batteries, dusts, exhaust fumes, fires, solvents, suspended loads, and welding. For each hazard, it identifies the associated risks and necessary precautions to avoid injury or damage. The purpose is to inform technicians about handling different chemicals, gases, and operations safely.
Case ih farmall 75 c tractor service repair manualfjjskeknjufksemm
The document contains a chapter on health and safety precautions for vehicle maintenance and repair. It lists various hazardous operations and materials alphabetically, such as acids, batteries, fuels, solvents, welding, etc. and identifies the associated health risks. Precautions are provided to avoid risks when working with these substances and performing different procedures. The document aims to inform technicians about handling health and safety issues during maintenance and repair work.
Case ih farmall 85 c tractor service repair manualfjjskeknjufksemm
The document contains a chapter on health and safety precautions for vehicle maintenance and repair. It lists various hazardous operations, materials, and equipment in alphabetical order. For each item, it identifies the associated health risks and provides precautions to avoid hazards when working with things like acids, batteries, welding equipment, solvents, suspended loads, and more. The goal is to inform repair technicians about safety measures for common procedures and chemicals to help prevent injuries.
Case ih farmall 95 c tractor service repair manualfjjskekskem
The document provides health and safety guidelines for working with various chemicals and materials, including acids, solvents, fuels, dusts, and welding equipment. It lists precautions to take when using these substances, such as proper ventilation, protective equipment, and first aid measures. Hazards including fire, electric shock, inhalation, and skin and eye contact are described. The document also notes the need to follow legal requirements when handling chemicals.
Case ih farmall 75 c tractor service repair manualfusjejfjskekme
The document provides guidance on health and safety precautions for working with various chemicals and materials. It lists chemicals such as acids, alkalis, solvents, fuels and discusses related hazards. It also provides do's and don'ts for safe handling of these materials, and addresses issues like fire, electric shock, dusts and fumes. Instructions are given for first aid and legal compliance when working with chemicals.
Case ih farmall 95 c tractor service repair manualfjjjskekksmem
The document provides guidance on health and safety precautions for working with various chemicals and materials. It lists chemicals such as acids, alkalis, solvents, fuels and discusses related hazards. It also provides instructions on proper handling of these materials, recommended personal protective equipment, first aid measures and legal compliance. Work should only be carried out by authorized personnel following all safety instructions to prevent injury or property damage.
Case ih jx95 straddle mount service repair manualfjskekmsemmwe
This document provides guidance on health and safety precautions for working with various hazardous materials that may be encountered when repairing tractors and their components. It lists numerous chemicals, processes, and situations requiring safety measures, such as acids, solvents, welding, dust, and electricity. Precautions include proper ventilation, protective equipment, first aid procedures, and legal compliance. The document aims to inform repair technicians about handling materials safely to prevent injury or damage.
Case ih jx95 straddle mount service repair manualjfdjjskfkksmemm
This document outlines health and safety precautions for working with various chemicals and materials that may be encountered during tractor repair, such as acids, alkalis, solvents, paints, fuels, dusts, and welding materials. It provides guidance on proper handling and storage of hazardous substances, necessary personal protective equipment, first aid measures, and legal compliance. Work should only be performed by authorized personnel who carefully follow all safety instructions to prevent injury and property damage.
New holland cr970 combine harvesters service repair manualfhsjejfksemm
This document is a repair manual for New Holland combines models CR920 through CR980. It provides repair instructions organized into sections covering the engine, transmission, hydraulics, electrical systems, threshing, cleaning, and other major systems. Safety precautions are outlined, noting hazards from chemicals, dust, electricity, and other factors. Proper service methods and repair procedures are emphasized to ensure safety and reliable machine operation.
New holland cr960 combine harvesters service repair manual instant downloadufjjsjekksekmm
This document is a repair manual for New Holland combines models CR920 through CR980. It provides repair instructions organized into sections covering the engine, transmission, hydraulics, electrical systems, harvesting components, and other areas of the combines. Safety precautions are outlined, and general information is provided on product identification, torque specifications, fittings, lubrication, and sealants to aid in repairs.
Similar to New holland 7010 tractor service repair manual (12)
New holland tc29 d tractor service repair manualfujsekfksmemf
This document is the contents page for a repair manual covering various tractor models. It lists 12 sections that provide information on different vehicle systems, including the engine, fuel, electrical, transmission and hydraulic systems, as well as steering, axles, wheels and separating the tractor. The document encourages downloading the full repair manual.
New holland tc25 tractor service repair manualfujsekfksmemf
This document is the contents page for a repair manual covering various tractor models. It lists 12 sections that provide information on different vehicle systems, including the engine, fuel, electrical, transmission and hydraulic systems, as well as steering, axles, wheels and separating the tractor. The document encourages downloading the full repair manual.
New holland rustler 125 service repair manualfujsekfksmemf
This document is a 2010 service manual for New Holland Rustler 125 gasoline and 120 diesel vehicles. It provides instructions for maintenance and repair procedures to technicians. Proper maintenance is essential for maximum performance and safe operation of the vehicles. The manual covers all aspects of typical vehicle service but contact the dealer if additional assistance is needed.
New holland rustler 120 service repair manualfujsekfksmemf
This service manual provides instructions for maintenance and repair of New Holland Rustler 120 and 125 vehicles. It covers all aspects of typical vehicle service, including safety procedures, vehicle specifications, general maintenance, body components, brake and suspension systems, wheels and tires, troubleshooting, and electrical components. Technicians should thoroughly review this manual, especially safety information, before servicing vehicles.
New holland mz18 h zero turn lawn mower service repair manualfujsekfksmemf
This repair manual provides information for repairing the MZ14H, MZ16H, and MZ18H zero radius tractors. The manual contains 7 sections that cover general information, the transaxle, chassis, mower decks, and electrical systems. Specifications for each model are provided, including engine details, dimensions, deck sizes, and other mechanical features. Safety warnings are given at the beginning to remind technicians to avoid injuries while servicing equipment.
New holland my19 riding mower service repair manualfujsekfksmemf
This repair manual covers New Holland garden tractors from model years 2016-2017 and 2019. It contains 7 sections on general information, model identification, greasing/lubrication, transaxles, chassis, mower decks, and electrical systems. The sections provide specifications, safety information, and repair procedures for the tractors.
New holland engine 9.0 l 6 cylinder, 24 valve cnh engine with high pressure c...fujsekfksmemf
The document is a repair manual that provides information on servicing New Holland 8.3 & 9.0L 6 cylinder engines with high pressure common rail fuel systems. It includes sections on the engine, fuel and injection system, air intake system, exhaust system, cooling system, lubrication system, and starting system. The manual uses an integrated coding environment to organize information and point to specific sections, chapters, and sub-chapters. It provides exploded views, specifications, torque values, service limits, inspection procedures, and special tool requirements for servicing engine components.
Kubota v3800 cr-tie4 c diesel engine service repair manualfujsekfksmemf
The document provides information on safely servicing and operating diesel engines. It outlines important safety precautions including reading all instructions before starting work, parking the machine securely, disconnecting the battery, and wearing protective equipment. Specific hazards are identified such as hot surfaces that can cause burns, high pressure fuel and hydraulic lines, and ensuring good ventilation when the engine is running due to carbon monoxide in the exhaust.
This document provides instructions for removing and installing the fuel injection pump housing and governor on Caterpillar 3304B and 3306B engines. The removal procedure involves disconnecting fuel lines and other components, then using lifting equipment to remove the housing due to its weight. The installation procedure describes preparing the housing components and placing them back on the engine, ensuring proper timing of the fuel injection pumps.
Caterpillar cat d8 n track type tractor dozer bulldozer (prefix 1xj) service ...fujsekfksmemf
This document provides instructions for removing and installing the rear gear group and flywheel on a Caterpillar D8N track-type tractor with a 3406 engine. The removal procedure involves using tools to remove 11 components in 9 steps, including gears, covers, seals, and bearings. The installation procedure provides instructions to install 14 components in 12 steps, noting the proper orientation and temperature treatment of bearings.
Caterpillar cat d8 l track type tractor dozer bulldozer (prefix 53y) service ...fujsekfksmemf
This document provides instructions for removing and installing the rear gear group and flywheel on a Caterpillar D8L track-type tractor powered by a 3408 engine. The removal procedure involves using various tools to disassemble the rear gear group components and adapter assemblies. The flywheel is removed by installing holding tools and using another tool attached to an overhead hoist. The installation procedure outlines reassembling the components and pressing or installing bearings back into place. Proper cleaning and lubrication of parts is emphasized.
The document provides instructions for assembling and installing ejector blade floor rollers on a 740 Ejector Articulated Truck. It outlines 15 steps for assembly, which include installing seals, bearings, plates and wheels using various tools. It then describes installing the assembled floor rollers onto the machine. The instructions note to clean parts and use new Cat parts if anything is worn or damaged.
The document provides instructions for removing and installing a rear power take-off (RPTO) on a 735 OEM articulated truck. The instructions include:
1) Using a driver group tool to install sleeve bearings in the flywheel housing at specific depths and angles.
2) Positioning gear assemblies, idler gears, and retainer assemblies and installing bolts.
3) Lubricating an O-ring seal and positioning adapters on the flywheel housing.
This document provides instructions for disassembling and assembling the retarder of a 730 OEM articulated truck. The disassembly process involves removing 20 components from the retarder in 20 steps, including retaining rings, plates, discs, races, seals, bolts, and a rotor. The assembly process reverses this, involving 21 steps to install the 20 components in the proper order and orientation, while applying lubrication and ensuring seals are properly seated. Special tools and cleanliness are emphasized throughout.
This document provides instructions for removing and installing components related to the rear gear group and flywheel of a Caterpillar C11 engine. The removal procedure includes 11 steps that describe removing bolts, seals, gears, bushings, and covers. The installation procedure includes 12 steps that describe cleaning, heating, and precisely installing the corresponding components in the reverse order of removal. Tools required are also listed.
Caterpillar cat 329 d ln excavator (prefix bfc) service repair manual (bfc000...fujsekfksmemf
1) The document provides instructions for servicing the transmission of a 329D L and 329D LN excavator by removing and disassembling the final drive, then reassembling it.
2) 37 steps are outlined for disassembly, which include removing gears, shafts, seals, and other components using various tools.
3) 35 steps are provided for reassembly, including pressing in bearings, measuring clearances, installing seals and pins, and refitting components in reverse order of disassembly. Cleanliness and applying lubricants are emphasized throughout.
Caterpillar cat 322 n excavator (prefix 9 jl) service repair manual (9jl00001...fujsekfksmemf
This document provides instructions for removing and installing a governor from Caterpillar 322 L, 322 LN, and 322 N excavators powered by a 3116 engine. The removal procedure involves disconnecting linkages and tubes, removing mounting bolts and clips, and extracting the governor from the engine. The installation procedure is the reverse of removal and includes cleaning, lubricating, and adjusting components as needed. Special tools are required to remove the governor and reinstall components properly.
Caterpillar cat 320 n excavator (prefix 3xk) service repair manual (3xk00001 ...fujsekfksmemf
This document provides instructions for removing a unit injector from an excavator engine. It lists the required tool and begins by having the user remove the rocker shaft and pushrods. The steps then describe using a bar tool to compress the unit injector springs and slide the injector out of the cylinder head. Proper containment of fluids during the process is noted.
Caterpillar cat 320 l excavator (prefix 3xk) service repair manual (3xk00001 ...fujsekfksmemf
This document provides instructions for removing a unit injector from an excavator engine. It lists the required tool and begins by having the user remove the rocker shaft and pushrods. The steps then describe using a bar tool to compress the unit injector springs and remove the injector. Proper containment of fluids during the process is noted for environmental protection.
This document provides instructions for removing a unit injector from an excavator engine. It lists the required tool and begins by having the user remove the rocker shaft and pushrods. The steps then describe using a bar tool to compress the unit injector springs and slide the injector out of the cylinder head. Proper containment of fluids during the process is noted.
Top-Quality AC Service for Mini Cooper Optimal Cooling PerformanceMotor Haus
Ensure your Mini Cooper stays cool and comfortable with our top-quality AC service. Our expert technicians provide comprehensive maintenance, repairs, and performance optimization, guaranteeing reliable cooling and peak efficiency. Trust us for quick, professional service that keeps your Mini Cooper's air conditioning system in top condition, ensuring a pleasant driving experience year-round.
car rentals in nassau bahamas | atv rental nassau bahamasjustinwilson0857
At Dash Auto Sales & Car Rentals, we take pride in providing top-notch automotive services to residents and visitors alike in Nassau, Bahamas. Whether you're looking to purchase a vehicle, rent a car for your vacation, or embark on an exciting ATV adventure, we have you covered with our wide range of options and exceptional customer service.
Website: www.dashrentacarbah.com
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
1. 87032904 4/03 2003 NEW HOLLAND NORTH AMERICA, INC.
Printed In U.S.A.
5610S, 6610S, 7610S, 7010, 8010
REPAIR MANUAL
COMPLETE CONTENTS
SECTION 00 - GENERAL 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 10 - ENGINE 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 18 - CLUTCH 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 21 - TRANSMISSION SYSTEMS 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 23 - FRONT AXLE TRANSFER BOX 9. . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 25 - FRONT AXLE -- FOUR WHEEL DRIVE 10. . . . . . . . . . . . . . . . . . .
SECTION 27 - MECHANICAL REAR WHEEL DRIVE 10. . . . . . . . . . . . . . . . . . . .
SECTION 31 - POWER TAKE-OFF 11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 33 - BRAKING SYSTEM 12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 35 - HYDRAULIC SYSTEM 13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 41 - STEERING SYSTEM 15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 44 - FRONT AXLE -- TWO WHEEL DRIVE 16. . . . . . . . . . . . . . . . . . . .
SECTION 55 - ELECTRICAL SYSTEMS 16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The following pages are the collation of the contents pages from each section and
chapter of the 5610S, 6610S, 7610S, 7010, and 8010 Tractor Repair manual. Complete
Repair part # 87032901.
The sections used through out all New Holland product Repair manuals may not be
used for each product. Each Repair manual will be made up of one or several books.
Each book will be labeled as to which sections are in the overall Repair manual and
which sections are in each book.
The sections listed above are the sections utilized for the 5610S, 6610S, 7610S, 7010,
and 8010 Tractors.
2. SECTION 00 -- GENERAL -- CHAPTER 1
00-1
GENERAL INSTRUCTIONS
IMPORTANT NOTICE
All maintenance and repair operations described in this manual should be carried out exclusively by New Holland
authorised workshops. All instructions should be carefully observed and special equipment where indicated
should be used.
Anyone who carries out service operations described without carefully observing these prescriptions will be
directly responsible for any damage caused.
NOTES FOR EQUIPMENT
Equipment which NEW HOLLAND proposes and shows in this manual is:
-- studied and designed expressly for use on NEW HOLLAND tractors;
-- necessary to make a reliable repair;
-- accurately built and strictly tested to offer efficient and long--lasting working life.
NOTICES
The words “front”, “rear”, “right hand”, and “left hand” refer to the different parts as seen from the operator’s seat
oriented to the normal direction of movement of the tractor.
4. SECTION 00 -- GENERAL -- CHAPTER 1
00-3
ACIDS AND ALKALIS -- see Battery acids, e.g.
caustic soda, sulfuric acid.
Used in batteries and cleaning materials.
Irritant and corrosive to the skin, eyes, nose and
throat. Causes burns.
Avoid splashes to the skin, eyes and clothing. Wear
suitable protective gloves and goggles. Can destroy
ordinary protective clothing. Do not breathe mists.
Ensure access to water and soap is readily available
for splashing accidents.
ADHESIVES AND SEALERS -- see Fire
Highly Flammable, Flammable, combustible.
Generally should be stored in “No Smoking” areas;
cleanliness and tidiness in use should be observed,
e.g. disposable paper covering benches; should be
dispensed from applicators where possible; contain-
ers, including secondary containers, should be
labelled.
Solvent based Adhesives/Sealers -- See Solvents.
Follow manufacturers instructions.
Water based Adhesives/Sealers
Those based on polymer emulsions and rubber
lattices may contain small amounts of volatile toxic
and harmful chemicals. Skin and eye contact should
be avoided and adequate ventilation provided during
use.
Follow manufacturers instructions.
Resin based Adhesives/Sealers -- e.g. epoxide
and formaldehyde resin based.
Mixing should only be carried out in well ventilated
areas as harmful or toxic volatile chemicals may be
released.
Skin contact with uncured resins and hardeners can
result in irritation; dermatitis and absorption of toxic
or harmful chemicals through the skin. Splashes can
damage the eyes.
Provide adequate ventilation and avoid skin and eye
contact. Follow manufacturers instructions.
Anaerobic, Cyanoacrylate and other Acrylic
Adhesives
Many are irritant, sensitizing or harmful to the skin.
Some are eye irritants.
Skin and eye contact should be avoided and the
manufacturers instructions followed.
Cyanoacrylate adhesives (super--glues) must not
contact the skin or eyes. If skin or eye tissue is
bonded cover with a clean moist pad and get medical
attention. do not attempt to pull tissue apart. Use in
well ventilated areas as vapours can cause irritation
of the nose and eyes.
For two--pack systems see Resin based adhesives/
sealers.
Isocyanate (Polyurethane) Adhesives/
Sealers -- see Resin based Adhesives.
Individuals suffering from asthma or respiratory
allergies should not work with or near these materials
as sensitivity reactions can occur.
Any spraying should preferably be carried out in
exhaust ventilated booths removing vapours and
spray droplets from the breathing zone. Individuals
working with spray applications should wear
supplied air respirators.
ANTIFREEZE -- see Fire, Solvents e.g.
Isopropanol, Ethylene Glycol, Methanol.
Highly Flammable, Flammable, Combustible.
Used in vehicle coolant systems, brake air pressure
systems, screenwash solutions.
Vapours given off from coolant antifreeze (glycol)
arise only when heated.
Antifreeze may be absorbed through the skin in toxic
or harmful quantities. Antifreeze if swallowed is fatal
and medical attention must be found immediately.
5. SECTION 00 -- GENERAL -- CHAPTER 1
00-4
ARC WELDING -- see Welding.
BATTERY ACIDS -- see Acids and Alkalis.
Gases released during charging are explosive.
Never use naked flames or allow sparks near
charging or recently charged batteries.
BRAKE AND CLUTCH FLUIDS
(Polyalkylene Glycols) -- see Fire.
Combustible.
Splashes to the skin and eyes are slightly irritating.
Avoid skin and eye contact as far as possible.
Inhalation of vapour hazards do not arise at ambient
temperatures because of the very low vapour
pressure.
BRAZING -- see Welding.
CHEMICAL MATERIALS -- GENERAL -- see
Legal Aspects.
Chemical materials such as solvents, sealers,
adhesives, paints, resin foams, battery acids,
antifreeze, brake fluids, oils and grease should
always be used with caution and stored and handled
with care. They may be toxic, harmful, corrosive,
irritant or highly inflammable and give rise to
hazardous fumes and dusts.
The effects of excessive exposure to chemicals may
be immediate or delayed; briefly experienced or
permanent; cumulative; superficial; life threatening;
or may reduce life--expectancy.
DO’S
Do remove chemical materials from the skin and
clothing as soon as practicable after soiling. Change
heavily soiled clothing and have it cleaned.
Do carefully read and observe hazard and
precaution warnings given on material containers
(labels) and in any accompanying leaflets, poster or
other instructions. Material health and safety data
sheets can be obtained from Manufacturers.
Do organise work practices and protective clothing to
avoid soiling of the skin and eyes; breathing
vapours/aerosols/dusts/fumes; inadequate contain-
er labelling; fire and explosion hazards.
Do wash before job breaks; before eating, smoking,
drinking or using toilet facilities when handling
chemical materials.
Do keep work areas clean, uncluttered and free of
spills.
Do store according to national and local regulations.
Do keep chemical materials out of reach of children.
6. SECTION 00 -- GENERAL -- CHAPTER 1
00-5
DO NOTS
Do Not mix chemical materials except under the
manufacturers instructions; some chemicals can
form other toxic or harmful chemicals; give off toxic
or harmful fumes; be explosive when mixed together.
Do Not spray chemical materials, particularly those
based on solvents, in confined spaces e.g. when
people are inside a vehicle.
Do Not apply heat or flame to chemical materials
except under the manufacturers’ instructions. Some
are highly inflammable and some may release toxic
or harmful fumes.
Do Not leave containers open. Fumes given off can
build up to toxic, harmful or explosive concentrations.
Some fumes are heavier than air and will accumulate
in confined areas, pits etc.
Do Not transfer chemical materials to unlabelled
containers.
Do Not clean hands or clothing with chemical
materials. Chemicals, particularly solvents and fuels
will dry the skin and may cause irritation with
dermatitis. Some can be absorbed through the skin
in toxic or harmful quantities.
Do Not use emptied containers for other materials,
except when they have been cleaned under
supervised conditions.
Do Not sniff or smell chemical materials. Brief
exposure to high concentrations of fumes can be
toxic or harmful.
Clutch Fluids -- see Brake and Clutch Fluids.
Clutch Linings and Pads -- see Brake and Clutch
Linings and Pads.
CORROSION PROTECTION MATERIALS --
see Solvents, Fire.
Highly flammable, flammable.
These materials are varied and the manufacturers
instructions should be followed. They may contain
solvents, resins, petroleum products etc. Skin and
eye contact should be avoided. They should only be
sprayed in conditions of adequate ventilation and not
in confined spaces.
Cutting -- see Welding.
De--Waxing -- see Solvents and Fuels (Kerosene).
DUSTS
Powder, dusts or clouds may be irritant, harmful or
toxic. Avoid breathing dusts from powdery chemical
materials or those arising from dry abrasion
operations. Wear respiratory protection if ventilation
is inadequate.
ELECTRIC SHOCK
Electric shocks can result from the use of faulty
electrical equipment or from the misuse of equipment
even in good condition.
Ensure that electrical equipment is maintained in
good condition and frequently tested.
Ensure that flexes, cables, plugs and sockets are not
frayed, kinked, cut, cracked or otherwise damaged.
Ensure that electric equipment is protected by the
correct rated fuse.
Never misuse electrical equipment and never use
equipment which is in any way faulty. The results
could be fatal.
Use reduced voltage equipment (110 volt) for
inspection and working lights where possible.
Ensure that the cables of mobile electrical equipment
cannot get trapped and damaged, such as in a
vehicle hoist.
Use air operated mobile equipment where possible
in preference to electrical equipment.
In cases of electrocution:--
-- switch off electricity before approaching victim
-- if this is not possible, push or drag victim from
source of electricity using dry non--conductive
material
-- commence resuscitation if trained to do so
-- SUMMON MEDICAL ASSISTANCE
7. SECTION 00 -- GENERAL -- CHAPTER 1
00-6
EXHAUST FUMES
These contain asphyxiating, harmful and toxic
chemicals and particles such as carbon oxides,
nitrogen oxides, aldehydes, lead and aromatic
hydrocarbons. Engines should only be run under
conditions of adequate extraction or general
ventilation and not in confined spaces.
Gasolene (Petrol) Engine
There may not be adequate warning properties of
odour or irritation before immediate and delayed
toxic or harmful effects arise.
Diesel Engine
Soot, discomfort and irritation usually give adequate
warning of hazardous fume concentrations.
FIBRE INSULATION -- see Dusts.
Used in noise and sound insulation.
The fibrous nature of surfaces and cut edges can
cause skin irritation. This is usually a physical and
not a chemical effect.
Precautions should be taken to avoid excessive skin
contact through careful organisation of work
practices and the use of gloves.
FIRE -- see Welding, Foams, Legal Aspects.
Many of the materials found on or associated with the
repair of vehicles are highly flammable. Some give
off toxic or harmful fumes if burnt.
Observe strict fire safety when storing and handling
flammable materials or solvents, particularly near
electrical equipment or welding processes.
Ensure before using electrical or welding equipment
but that there is no fire hazard present.
Have a suitable fire extinguisher available when
using welding or heating equipment.
FIRST AID
Apart form meeting any legal requirements it is
desirable for someone in the workshop to be trained
in first aid procedures.
Splashes in the eye should be flushed with clean
water for at least ten minutes.
Soiled skin should be washed with soap and water.
Inhalation affected individuals should be removed to
fresh air immediately.
If swallowed or if effects persist consult a doctor with
information (label) on material used.
Do not induce vomiting (unless indicated by
manufacturer).
FOAMS -- Polyurethane -- see Fire.
Used in sound and noise insulation. Cured foams
used in seat and trim cushioning.
Follow manufacturers instructions.
Unreacted components are irritating and may be
harmful to the skin and eyes. Wear gloves and
goggles.
Individuals with chronic respiratory diseases,
asthma, bronchial medical problems or histories of
allergic diseases should not work with or near
uncured materials.
The components, vapours, spray mists can cause
direct irritation, sensitivity reactions and may be toxic
or harmful.
Vapours and spray mists must not be breathed.
These materials must be applied with adequate
ventilation and respiratory protection. Do not remove
respirator immediately after spraying, wait until
vapour/ mists have cleared.
Burning of the uncured components and the cured
foams can generate toxic and harmful fumes.
Smoking, open flames or the use of electrical
equipment during foaming operations and until
vapours/mists have cleared should not be allowed.
Any heat cutting of cured foams or partially cured
foams should be conducted with extraction ventila-
tion (see Body Section 44 Legal and Safety Aspects).
9. SECTION 10 -- ENGINE -- CHAPTER 1
10-2
ENGINE SPECIFICATIONS
Model Unit 5610 S 6610 S 7610 S 7010 8010
Turbocharged Engine No No Yes Yes No
Cylinders 4 4 4 4 6
Bore mm 111.8 111.8 111.8 111.8 111.8
in 4.4 4.4 4.4 4.4 4.4
Stroke mm 111.8 127.0 127.0 127.0 127.0
in 4.4 5.0 5.0 5.0 5.0
Displacement cu cm 4392 4987 4987 4987 7480
cu in 268 304 304 304 456
Compression Ratio 17.5:1 17.5:1 17.5:1 17.5:1 17.5:1
Cylinder Bore Compression
(at cranking speed of 200 rpm)
bar 25.85 25.85 25.85 25.85 25.85
psi ± 50 375 375 375 375 375
Firing Order 1⋅3⋅4⋅2 1⋅3⋅4⋅2 1⋅3⋅4⋅2 1⋅3⋅4⋅2 1⋅5⋅3⋅6⋅2⋅4
Low-Idle Speed rev/min ± 25 750 750 750 750 750
High-Idle Speed rev/min ± 25 2350 2350 2250 2250 2250
Maximum No-Load Speed rev/min 2375 2375 2375 2250 2250
Rated Engine Speed rev/min 2200 2200 2100 2200 2100
CYLINDER BLOCK
Cylinder Bore Taper maximum wear limit 0.127 mm 0.005 in.
maximum repair limit 0.025 mm 0.001 in.
Cylinder Bore Out-of-Round maximum wear limit 0.127 mm 0.005 in.
maximum repair limit 0.030 mm 0.001 in.
Cylinder Bore Diameter 110.017-110.080 mm 4.331-4.334 in.
Rear Oil Seal Diameter 140.77-140.87 mm 5.542-5.546 in.
Head-to-Block Surface Flatness any 152 mm (6 in.) area 0.080 mm 0.003 in.
Limit any 25.40 mm (1 in.) area 0.030 mm 0.001 in.
overall 0.127 mm 0.005 in.
CYLINDER HEAD
Valve Guide Bore Diameter 9.469-9.495 mm 0.3728-0.3738 in.
10. SECTION 10 -- ENGINE -- CHAPTER 1
10-3
EXHAUST VALVES
Face Angle relative to valve head 44°15′-44°30′
Stem Diameter Std 9.401-9.421 mm 0.3701-0.3709 in.
0.076 mm 0.003 in.
oversize 9.477-9.497 mm 0.3731-0.3739 in.
0.381 mm 0.015 in.
oversize 9.781-9.802 mm 0.3851-0.3859 in.
0.762 mm 0.030 in.
oversize 10.163-10.183 mm 0.4001-0.4009 in.
Head Diameter 42.88-43.13 mm 1.688-1.698 in.
Stem-to-Guide Clearance 0.048-0.094 mm 0.0019-0.0037 in.
Lash Clearance cold 0.43-0.53 mm 0.017-0.021 in.
Valve Head-to-Cylinder Head Face Depth 1.2-1.6 mm 0.047-0.063 in.
INTAKE VALVES
Face Angle relative to valve head 29°15′-29°30′
Stem Diameter Std 9.426-9.446 mm 0.3711-0.3719 in.
0.076 mm 0.003 in.
oversize 9.502-9.522 mm 0.3741-0.3749 in.
0.381 mm 0.015 in.
oversize 9.807-9.827 mm 0.3861-0.3869 in.
0.762 mm 0.030 in.
oversize 10.188-10.208 mm 0.4011-0.4019 in.
Head Diameter 47.37-47.63 mm 1.865-1.875 in.
Stem-to-Guide Clearance 0.023-0.069 mm 0.0009-0.0027 in.
Lash Clearance cold 0.36-0.46 mm 0.014-0.018 in.
Valve Head-to-Cylinder Head Face Depth 0.86-1.32 mm 0.034-0.052 in.
VALVE SPRINGS
Free Length 60.7 mm 2.4 in.
Length loaded at 28-31 kg (62-68 lbs.) 48.3 mm 1.9 in.
Length loaded at 61-69 kg (135-152 lbs.) 35.7 mm 1.4 in.
VALVE TIMING
Intake Opening before top dead center 12°
Intake Closing after bottom dead center 38°
Exhaust Opening before bottom dead center 48°
Exhaust Closing after top dead center 12°
11. SECTION 10 -- ENGINE -- CHAPTER 1
10-20
Engine Oil Flow
1
Engine Lubrication System with Turbocharger Installed
12. SECTION 10 -- ENGINE -- CHAPTER 1
10-21
SEPARATING THE TRACTOR
Separating the engine from the front
transmission
1. Raise the right-hand hood assembly and support
with rod. Disconnect the battery.
2. Remove the vertical exhaust muffler (where
installed) to facilitate removing the left-hand
hood assembly.
3. Completely remove the left and right-hand side
hood assemblies, Figure 2, by removing
retaining bolts.
4. Remove the exhaust piping on the left-hand side
of the engine (where installed) at the clamp
below the auxiliary engine mounted hydraulic
pump.
5. Remove the hydraulic piping at the auxiliary
engine mounted pump (where installed). Cap
and plug all exposed openings to prevent
contamination. Remove and retain brackets for
piping.
6. Remove the hydraulic steering piping on the
left-hand side of the engine. Cap and plug all
exposed openings to prevent contamination.
Remove and retain brackets for piping.
7. Disconnect the rear hood assembly from the left,
right and center brackets by removing the
retaining bolts.
8. Disconnect the front and rear harness assem-
blies and ground wires. Remove and retain clips.
9. Disconnect the hydraulic oil cooler tubing at the
center housing. Cap and plug all exposed
openings to prevent contamination. Remove and
retain brackets and clamps for piping.
10. Disconnect the wires at the starter motor.
11. Remove the starter motor, and the battery
grounding cable from the retaining bolt.
12. Remove the bolts securing the fuel tank to the
center support bracket at the front of the tank.
13. Disconnect the throttle control rod from the fuel
injection pump.
14. Close the fuel shut-off valve and disconnect the
fuel tank-to-fuel filter tube at the tank.
15. Disconnect the fuel filter hose from the fuel
auxiliary tank (where installed).
16. Release the fuel leak-off tube from the neck of
the filler tube (where installed).
17. Remove the engine flywheel access cover.
18. Remove the drive shaft guard assembly (where
installed).
19. Remove the drive shaft-to-axle drive flange
retaining bolts, and remove drive shaft (where
installed).
20026052
2
13. SECTION 10 -- ENGINE -- CHAPTER 1
10-22
20. Position the tractor Splitting Tool No. 201387,
Figure 3.
21. Remove the engine-to-front transmission buckle
up bolts and pull the front of the tractor away from
the rear of the tractor.
20026053
3
Reconnecting the engine to the front
transmission
Reconnecting the engine to the front transmission
follows the separation procedures in reverse with the
following requirements:
1. When aligning the front of the tractor with the
rear, ensure the correct positioning of all
components to prevent damage from bending,
pinching or crushing.
2. Tighten the top two and bottom two engine
to-transmission buckle up bolts to 373-460 N⋅⋅⋅⋅m
(275-339 ft.-lb.). Tighten the two lower side bolts
to 224-271 N⋅⋅⋅⋅m (165-200 ft.-lb.), and the upper
two side bolts to 190-230 N⋅⋅⋅⋅m (140-170 ft.-lb.),
see Figure 4.
3. Tighten the starter motor to a torque of 27-34 N⋅⋅⋅⋅m
(240-300 in.-lb.).
4. Check for proper installation of all washers,
spacers, brackets and clamps.
5. Check all fuel connections for proper tightening.
6. Bleed air from fuel system and leak check piping.
7. Check all hydraulic connections for proper
tightening.
8. Check level of hydraulic oil and replenish as
necessary.
9. Bleed air from hydraulic system and leak check
piping.
10. Perform check of the steering system.
4
14. SECTION 10 -- ENGINE -- CHAPTER 1
10-23
Separating the engine from the front axle
assembly
1. Correctly discharge the refrigerant from the air
conditioning system (where installed).
2. Raise the right-hand hood assembly and support
with rod. Disconnect the battery (9).
3. Remove the vertical exhaust muffler (where
installed).
4. Remove the left and right hood assemblies by
removing the retaining bolts.
5. Remove the air pre-cleaner to facilitate removing
the front hood assembly.
6. Raise the front hood assembly (1), and support
with rod.
7. Remove the radiator grill assembly (4).
8. Disconnect the electrical connections to the
horn, headlamps, and air conditioning thermo-
stat (where installed).
9. Disconnect clips retaining the front wiring
harness to the front section of the tractor.
10. Drain the radiator coolant. Refer to section 10,
Chapter 2 “Cooling System”.
11. Remove the engine fan shroud (14).
12. Disconnect the oil cooler piping (7). Cap and plug
all openings to prevent contamination.
13. Loosen the clamps and disconnect the upper
(12) and lower (5) hoses from the radiator.
Disconnect all other radiator hoses.
14. Loosen clamps and disconnect intake hose (10)
from air cleaner (2).
15. Disconnect hoses from the air conditioning
condenser (where installed).
16. Insert wooden wedges between the axle support
(6) and the front axle to prevent movement.
17. Remove the retaining bolts and radiator shell (3)
from support.
18. Remove the retaining bolt and separate the drag
link from the steering arm (where installed).
19. Remove the hydraulic steering piping on the
left-hand side of the engine. Cap and plug all
exposed openings to prevent contamination.
Remove and retain brackets for piping.
20. Remove the drive shaft guard assembly (where
installed).
21. Remove the drive shaft-to-axle drive flange
retaining bolts, and remove drive shaft (where
installed).
16. SECTION 10 -- ENGINE -- CHAPTER 1
10-25
22. Position the Splitting Tool No. 201387 under the
tractor.
23. Remove the buckle-up bolts and separate the
engine from the front axle.
NOTE: If needed, remove the front axle rear pin and
raise the engine a sufficient distance to facilitate
removal of the front axle.
20026054
6
Reconnecting the engine to the front axle
assembly
Reconnecting the engine to the front axle assembly
follows the separation procedures in reverse with the
following requirements:
1. When aligning the front axle assembly with the
engine, ensure the correct positioning of all
components to prevent damage from bending,
pinching or crushing.
2. Tighten the buckle-up bolts to a torque of
240-298 N⋅⋅⋅⋅m (177-220 ft.-lb.).
3. Check for proper installation of all washers,
spacers, brackets and clamps.
4. Service the air conditioning system as needed
(where installed).
5. Replenish the cooling system. Refer to Section
10, Chapter 2 “Cooling System”.
6. Check all cooling system hoses for leaks.
7. Replenish and bleed air from hydraulic system as
needed.
8. Check the hydraulic oil cooler hoses for leaks.
9. Check that the horn, headlamps and air
conditioning thermostat function properly (where
installed).
10. Check the steering system for proper operation.
17. SECTION 10 -- ENGINE -- CHAPTER 1
10-26
DISASSEMBLY AND OVERHAUL
Dismantle the engine following conventional tech-
niques, or by referring to the following removal
procedure. Refer to the Engine Specifications
section.
NOTE: Replace gaskets, seals, and O-rings when
reassembling components and/or the engine.
7
Right Hand View of Engine
CYLINDER HEAD, VALVES, AND RELATED
PARTS
Removal
1. Disconnect battery and swing battery tray away
from engine.
2. Remove vertical exhaust muffler (where
installed) and the exhaust extension pipe.
3. Remove left and right hood assemblies.
4. Remove air pre-cleaner. Raise and secure the
front hood assembly.
5. Remove engine side panels and guards.
6. Drain coolant from the radiator and engine block.
Refer to Section 10, Chapter 2 “Cooling System”.
7. Shut off heater hose taps. Disconnect and plug
heater hoses.
8. Remove radiator top hose. Cap and plug all
openings to prevent contamination.
9. Remove air cleaner-to-intake manifold tube.
10. Shut off fuel valve at bottom of fuel tank.
11. Disconnect low-pressure fuel pipes and remove
inlet manifold. Cap and plug openings
12. Disconnect and remove fuel pipes to the fuel
injector pump. Cap and plug all openings.
13. Disconnect ‘thermostart’ fuel pipe on the intake
manifold. Cap and plug all openings.
14. Disconnect and remove the ventilation tube on
the rocker cover.
15. Loosen the belt tension and remove the
alternator.
16. Disconnect tacho-drive on the engine front
cover. (where installed)
17. Disconnect all loom connections on engine
harness and secure clear of the engine.
18. SECTION 10 -- ENGINE -- CHAPTER 1
10-27
18. Remove turbocharger assembly, Figure 8. Refer
to Section 10, Chapter 5 “Turbocharger
Overhaul”. Cap and plug all openings.
8
Turbocharger Assembly
1. Turbo Housing
2. Oil Feed/Return Tubes
3. Exhaust Manifold
4. Inlet Manifold
5. Inlet Hoses/Tubes
19. Remove water pump. Refer to Section 10,
Chapter 2 “Cooling System”. Cap and plug all
openings.
20. Remove water pump connector from the engine
cylinder head.
9
Water Pump Assembly
1. Pump Body
2. Pulley Assembly
3. Thermostat
4. Gasket
5. Thermostat Housing
6. Temperature Sender
19. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
20. SECTION 10 -- ENGINE -- CHAPTER 1
10-28
21. Remove exhaust manifold (2) and gasket.
22. Remove inlet manifold (1) and gasket
10
Manifold Assembly
1. Inlet Manifold
2. Exhaust Manifold
23. Clean area surrounding the fuel injectors.
24. Remove injection pump-to-fuel injector, and leak
off piping.
25. Remove fuel injectors.
26. Remove rocker cover and gasket.
11
Injector Removal
1. Fuel Injector
2. Mounting Bolts
3. Copper Washer
4. Cork Washer
27. Rotate push rods with the valve closed and check
for bent rods.
12
Push Rod Installation
21. SECTION 10 -- ENGINE -- CHAPTER 1
10-29
ROCKER SHAFT
Disassembly
NOTE: Leave bolts in rocker shaft supports during
removal to retain the support on the shaft.
1. Remove the cylinder head bolts (3), which pass
through the rocker shaft supports (2), Figure 13.
2. Loosen the rocker shaft retaining bolts (cylinder
head bolts) evenly, and alternately. Remove the
rocker shaft assembly.
3. Remove push rods in turn. Place rods in a
numbered rack to maintain the same position for
re-assembly.
4. Remove remaining cylinder head bolts working
inwards and alternately from the cylinder head
end to the center.
13
Rocker Shaft Assembly
1. Spring
2. Shaft Support
3. Retaining Bolt
4. Rocker Arm
5. Shaft
6. Spacer
CYLINDER HEAD
Disassembly
1. Remove the retainer locks (2), springs (3), seals
and rotators with a valve spring compressor (1).
Place parts in a numbered rack, Figure 14.
14
Valve Removal
1. Valve Spring Compressor
2. Retainer Locks
3. Valve Springs
22. SECTION 10 -- ENGINE -- CHAPTER 1
10-30
2. Remove carbon deposits and clean around the
cylinder heads.
15
Valve Assemblies
Intake Valve
1. Valve Spring Lock
2. Spring Rotator
3. Seal
4. Spring
5. Valve
Exhaust Valve
6. Valve
7. Spring
8. Seal
9. Spring Rotator
10. Spring Rotator
11. Valve Spring Lock