This document contains drawings and specifications for signage to be installed in Building 3230, a dental clinic, as part of a renovation project. The signage includes interior and exterior directional signs, room identification signs, and department directories. The signs will have raised tactile lettering and Braille and will be made of brushed aluminum and acrylic materials in various sizes. Cleaning and maintenance instructions are provided to prevent degradation of the tactile and Braille features.
Ril preliminary report of tank 641-207kaushik21185
An inspection was performed on Tank 641-207 using low frequency electromagnetic techniques. The tank is 30 meters in diameter with 49 bottom plates and 28 annular plates. Scanning found surface corrosion and pitting on several bottom plates and one annular plate, with pit depths up to 3.5 mm. Most plates showed 0-20% wall loss, though one bottom plate showed 41-50% loss. Grinding and body welding was noted on several plates.
This document contains architectural plans and drawings for a proposed two-storey residence located in Pilar Village Phase 6, Almanza Uno, Las Piñas City. The drawings include a site development plan, floor plans, elevations, sections, schedules and details of doors, windows and other building elements. The document is signed and sealed by the architect and structural engineer and contains notes regarding ownership and unauthorized duplication of the design documents.
This document contains architectural drawings for a commercial project at the Art Institute of Houston including floor plans, furniture plans, power plans, reflected ceiling plans, exterior elevations, building sections, and enlarged bathroom plans and elevations. The drawings include room labels, door schedules, notes, and other details. Revision numbers and indexes are provided for the various drawings.
This document contains architectural drawings and notes for a building project located at 289 Tappan Street in Brookline, MA. It includes floor plans, elevations, and sections of the building showing wall types and materials. Notes provide information on construction requirements, dimensions, building codes, and specifications.
The document contains a site plan and building elevations for a multi-family residential development with the following features:
- The site plan shows three residential buildings totaling 319 units, detached garage buildings, parking areas, landscaping, fencing, and site amenities including a pool, dog park, and pavilion.
- The building elevations depict three-story construction with varying exterior materials including brick veneer, cementitious siding and paneling, and vinyl windows. Amenity spaces like a clubhouse and fitness area are also indicated.
- Additional details provided include unit counts and parking requirements for the development. Existing trees on site and site features like retaining walls and transformers are labeled.
The document describes the Metso Neles T5 series top entry rotary control valves. Key features include:
- Wide control rangeability up to a 150:1 turndown ratio and ability to serve as an alternative for globe control valves.
- Stable and accurate control due to load being carried by strong bearings and single-piece stemball construction eliminating lost motion.
- Ability to handle fluids with entrained solids and provide tight shut-off with long life metal or soft seats.
- Noise reduction options like Q-Trim can provide up to 18 dB(A) attenuation and self-flushing for impure fluids.
This document contains drawings and details for a 5' non-advertising low dome euro shelter, including:
1) Front and top views of the shelter showing structural members and dimensions.
2) Side and isometric views as well as cross sections and details of structural connections.
3) Notes specifying materials, welding standards, and quality control procedures.
Ril preliminary report of tank 641-207kaushik21185
An inspection was performed on Tank 641-207 using low frequency electromagnetic techniques. The tank is 30 meters in diameter with 49 bottom plates and 28 annular plates. Scanning found surface corrosion and pitting on several bottom plates and one annular plate, with pit depths up to 3.5 mm. Most plates showed 0-20% wall loss, though one bottom plate showed 41-50% loss. Grinding and body welding was noted on several plates.
This document contains architectural plans and drawings for a proposed two-storey residence located in Pilar Village Phase 6, Almanza Uno, Las Piñas City. The drawings include a site development plan, floor plans, elevations, sections, schedules and details of doors, windows and other building elements. The document is signed and sealed by the architect and structural engineer and contains notes regarding ownership and unauthorized duplication of the design documents.
This document contains architectural drawings for a commercial project at the Art Institute of Houston including floor plans, furniture plans, power plans, reflected ceiling plans, exterior elevations, building sections, and enlarged bathroom plans and elevations. The drawings include room labels, door schedules, notes, and other details. Revision numbers and indexes are provided for the various drawings.
This document contains architectural drawings and notes for a building project located at 289 Tappan Street in Brookline, MA. It includes floor plans, elevations, and sections of the building showing wall types and materials. Notes provide information on construction requirements, dimensions, building codes, and specifications.
The document contains a site plan and building elevations for a multi-family residential development with the following features:
- The site plan shows three residential buildings totaling 319 units, detached garage buildings, parking areas, landscaping, fencing, and site amenities including a pool, dog park, and pavilion.
- The building elevations depict three-story construction with varying exterior materials including brick veneer, cementitious siding and paneling, and vinyl windows. Amenity spaces like a clubhouse and fitness area are also indicated.
- Additional details provided include unit counts and parking requirements for the development. Existing trees on site and site features like retaining walls and transformers are labeled.
The document describes the Metso Neles T5 series top entry rotary control valves. Key features include:
- Wide control rangeability up to a 150:1 turndown ratio and ability to serve as an alternative for globe control valves.
- Stable and accurate control due to load being carried by strong bearings and single-piece stemball construction eliminating lost motion.
- Ability to handle fluids with entrained solids and provide tight shut-off with long life metal or soft seats.
- Noise reduction options like Q-Trim can provide up to 18 dB(A) attenuation and self-flushing for impure fluids.
This document contains drawings and details for a 5' non-advertising low dome euro shelter, including:
1) Front and top views of the shelter showing structural members and dimensions.
2) Side and isometric views as well as cross sections and details of structural connections.
3) Notes specifying materials, welding standards, and quality control procedures.
This document contains diagrams and specifications for commercial signage projects. It includes details for:
1) Three sets of internally illuminated channel letters with light bars to spell "Moviehouse", "Eatery", and "&" in different colors.
2) Reverse internally illuminated channel letters to spell a business name finished in brushed aluminum and neon.
3) A set of internally illuminated channel letters for interior use with white plex faces and returns.
This document provides an index and product listings for paints and primers for industrial use. It includes 1K and 2K primers, shop primers, zinc-rich primers, converters, enamels, varnishes, thinners, degreasers, and additives. Products are grouped into chapters covering topics like primers, protective coatings, finishing products, thinners, and more. Each product listing provides the product code, name, details, packaging and pricing. This document appears to be a catalog for an industrial paint supplier.
- This document contains framing plans and details for a platform and roof structure.
- It includes a platform framing plan showing structural members, connections, and decking. Elevations of members are provided.
- A roof framing plan shows framing for the roof structure including beams, channels, and purlins. Details show connections between members.
- Additional details provide specifications for structural members, connections, guardrails, and access ladders for the platform.
This document contains architectural drawings and details for a private house designed by Salma Mahgoub. It includes a site plan, basement floor plan, ground floor plan, and second floor plan. The drawings show the layout and dimensions of the rooms. Salma contributed to the project by drafting it in ArchiCAD 16 software and assisting with plan development while completing a job training program in 2015. The status of the project is listed as under construction.
This document provides a list of materials pending chroming, painting, and finishing processes for different customers and orders. It includes the product code, dimensions, coating/painting details, order dates, and order/agreement numbers for materials from multiple clients, totaling over 8,000 pieces. The materials are from various aluminum profile types and most require chroming, painting, or bronze coating before being shipped to customers.
This document provides plans and details for a proposed 6-level building at Unitec Waitakere Campus in Henderson, Auckland. It includes a cover sheet, register sheet, floor plans for levels 1 through 6, elevations, sections and details. The plans show the layout of spaces including reception, cafe, labs, offices and amenities. Structural elements like precast walls, beams and columns are indicated along with curtain wall, glazing and stair/elevator locations. Finishes and other annotations are included in schedules to fully describe the proposed building.
This architectural drawing set provides plans, elevations, sections and details for a proposed dental office remodel project. The first page includes a title sheet with project information and a sheet index. Subsequent sheets include a floor plan showing room layout and dimensions, door and finish schedules, reflected ceiling plans, elevations, building sections and wall sections, as well as construction detail drawings.
This document contains revisions and part lists for an amplifier test rack assembly. It includes 5 revisions from initial release in October 2015 to an updated serial number table in May 2016. It then lists 43 individual parts, including the enclosure assemblies, computer components, and various fasteners. Schematics and additional assembly details are referenced on sheets 5 through 10.
This document contains architectural drawings for a proposed single-family residence in Lumberland, New York. The drawings include site plans, floor plans, elevations, sections and details of the building. Notes on the drawings indicate it will be a 1,500 square foot structure constructed on pier foundations with a metal roof. Energy compliance will be verified through a HERS rating by the architect.
Copper bonded-earthing-rod-manufacturerUjjwal Shah
This document provides information on the manufacture and specifications of copper bonded earthing rods. Some key details include:
- Copper bonded earthing rods are made from low carbon steel and are molecularly bonded with 99.9% pure electrolytic copper.
- They have corrosion resistance while providing the lowest resistance to ground. Threads are rolled to maintain an even copper covering.
- The document lists various rod sizes and product codes for solid copper bonded and solid bonded rods. It also provides specifications for fittings and accessories for these rods.
Farmers Grand Rapids MI Print Distribution CenterRichard Clark
The document provides details for 12 different wall types including dimensions and materials. It specifies the wall types for different areas including steel studs spaced at 16 inches, varying thicknesses of sound attenuation blankets and gypsum boards, fire ratings, and STC sound ratings between 45-57. It also provides a legend for the wall types and sections for each.
Copper bonded-grounding-rod-manufacturerUjjwal Shah
This document provides information on the manufacture and specifications of copper bonded grounding rods. It describes the manufacturing process which involves bonding 99.9% pure electrolytic copper to steel rods using molecular bonding. This creates a perfectly bonded rod that is highly corrosion resistant and provides low ground resistance. The document lists various rod sizes and specifications such as diameter, length, and product codes. It also describes additional grounding accessories and fittings that can be used with the rods.
This document provides a list of tools from Terex Ritz Hotline including:
1. Clampsticks, insulated rubber blankets, safety harnesses, pole and conductor covers, telescopic hotsticks, grounding clamps, spliced disconnect sticks, jumpers and clamps for transmission line equipment.
2. The tools range in size from 25mm to 38mm in diameter and 1,520mm to 10,590mm in length.
3. Several items are listed with their voltage rating, size range, length, current rating and weight to specify their applications for transmission line work.
The document contains drawings and specifications for an IOHA display screen project. It includes a layout plan, elevations, sections and detailed drawings of the display stands and screens. The materials listed include brushed aluminum, acrylic, carpet and foam. Dimensions and notes provide instructions for assembly, such as polished welds and using magnets or adhesive for posters.
Studbolt Scotland - Full Brochure (Rev1)Paul Queen
The document is a catalog from Studbolt Scotland that provides information on fasteners and other industrial supplies. It includes sections on studbolts, nuts, bolts, washers, gaskets, and pipe supports. Studbolt Scotland stocks a wide range of petrochemical and industrial fasteners that meet various standards like ASME, DIN, ISO and ASTM. They can supply items from stock or on short lead times and also produce custom fasteners to customer specifications.
The document appears to be architectural plans for a residential property located at 4838 SW Comus St in Portland, Oregon. It includes site plans, elevations, floor plans, sections and details. The site plan shows topographic lines, proposed landscaping including trees and permeable pavers, and notes the lot size is 0.21 acres. Floor plans detail the basement, main and mezzanine/attic levels. Elevations depict the materials and features on each facade, including metal and wood siding, stone veneer and windows. Sections and details provide additional construction information. Dimensions, notes and schedules are included to fully convey the design and specifications of the proposed single family residence.
This document provides contact information for the sales, technical support, and international offices of Electrium Sales Limited, a Siemens company that produces electrical wiring accessories. It also includes a brief description of Crabtree, a brand of Electrium that offers wiring accessories that comply with British standards and are designed, manufactured, and tested in the UK. Crabtree products include switches, sockets, trunking, circuit protection devices, and accessories for various applications.
This document provides details about the first certified Passive House Plus project in Minnesota. It is a single-family home located in St. Paul that prioritizes views, accessibility, health, sustainability and energy efficiency. The building envelope and materials are designed to meet Passive House standards with high insulation values, an air-tight envelope, and triple-pane windows. Diagrams and details are included to illustrate the construction methods for walls, roof, foundation, and windows.
We have never compromised on the quality, response, timely delivery and other info to be provided to the customer. We believe in keeping the customers happy and providing them with products at a very Competitive price.
John guest-fittings with Nespl, Natron Equipment & Spares Pvt. Ltd. is delivering services par excellence and have constituted a team of expert professionals who drive passion & perfection into whatever they do.
This document contains diagrams and specifications for commercial signage projects. It includes details for:
1) Three sets of internally illuminated channel letters with light bars to spell "Moviehouse", "Eatery", and "&" in different colors.
2) Reverse internally illuminated channel letters to spell a business name finished in brushed aluminum and neon.
3) A set of internally illuminated channel letters for interior use with white plex faces and returns.
This document provides an index and product listings for paints and primers for industrial use. It includes 1K and 2K primers, shop primers, zinc-rich primers, converters, enamels, varnishes, thinners, degreasers, and additives. Products are grouped into chapters covering topics like primers, protective coatings, finishing products, thinners, and more. Each product listing provides the product code, name, details, packaging and pricing. This document appears to be a catalog for an industrial paint supplier.
- This document contains framing plans and details for a platform and roof structure.
- It includes a platform framing plan showing structural members, connections, and decking. Elevations of members are provided.
- A roof framing plan shows framing for the roof structure including beams, channels, and purlins. Details show connections between members.
- Additional details provide specifications for structural members, connections, guardrails, and access ladders for the platform.
This document contains architectural drawings and details for a private house designed by Salma Mahgoub. It includes a site plan, basement floor plan, ground floor plan, and second floor plan. The drawings show the layout and dimensions of the rooms. Salma contributed to the project by drafting it in ArchiCAD 16 software and assisting with plan development while completing a job training program in 2015. The status of the project is listed as under construction.
This document provides a list of materials pending chroming, painting, and finishing processes for different customers and orders. It includes the product code, dimensions, coating/painting details, order dates, and order/agreement numbers for materials from multiple clients, totaling over 8,000 pieces. The materials are from various aluminum profile types and most require chroming, painting, or bronze coating before being shipped to customers.
This document provides plans and details for a proposed 6-level building at Unitec Waitakere Campus in Henderson, Auckland. It includes a cover sheet, register sheet, floor plans for levels 1 through 6, elevations, sections and details. The plans show the layout of spaces including reception, cafe, labs, offices and amenities. Structural elements like precast walls, beams and columns are indicated along with curtain wall, glazing and stair/elevator locations. Finishes and other annotations are included in schedules to fully describe the proposed building.
This architectural drawing set provides plans, elevations, sections and details for a proposed dental office remodel project. The first page includes a title sheet with project information and a sheet index. Subsequent sheets include a floor plan showing room layout and dimensions, door and finish schedules, reflected ceiling plans, elevations, building sections and wall sections, as well as construction detail drawings.
This document contains revisions and part lists for an amplifier test rack assembly. It includes 5 revisions from initial release in October 2015 to an updated serial number table in May 2016. It then lists 43 individual parts, including the enclosure assemblies, computer components, and various fasteners. Schematics and additional assembly details are referenced on sheets 5 through 10.
This document contains architectural drawings for a proposed single-family residence in Lumberland, New York. The drawings include site plans, floor plans, elevations, sections and details of the building. Notes on the drawings indicate it will be a 1,500 square foot structure constructed on pier foundations with a metal roof. Energy compliance will be verified through a HERS rating by the architect.
Copper bonded-earthing-rod-manufacturerUjjwal Shah
This document provides information on the manufacture and specifications of copper bonded earthing rods. Some key details include:
- Copper bonded earthing rods are made from low carbon steel and are molecularly bonded with 99.9% pure electrolytic copper.
- They have corrosion resistance while providing the lowest resistance to ground. Threads are rolled to maintain an even copper covering.
- The document lists various rod sizes and product codes for solid copper bonded and solid bonded rods. It also provides specifications for fittings and accessories for these rods.
Farmers Grand Rapids MI Print Distribution CenterRichard Clark
The document provides details for 12 different wall types including dimensions and materials. It specifies the wall types for different areas including steel studs spaced at 16 inches, varying thicknesses of sound attenuation blankets and gypsum boards, fire ratings, and STC sound ratings between 45-57. It also provides a legend for the wall types and sections for each.
Copper bonded-grounding-rod-manufacturerUjjwal Shah
This document provides information on the manufacture and specifications of copper bonded grounding rods. It describes the manufacturing process which involves bonding 99.9% pure electrolytic copper to steel rods using molecular bonding. This creates a perfectly bonded rod that is highly corrosion resistant and provides low ground resistance. The document lists various rod sizes and specifications such as diameter, length, and product codes. It also describes additional grounding accessories and fittings that can be used with the rods.
This document provides a list of tools from Terex Ritz Hotline including:
1. Clampsticks, insulated rubber blankets, safety harnesses, pole and conductor covers, telescopic hotsticks, grounding clamps, spliced disconnect sticks, jumpers and clamps for transmission line equipment.
2. The tools range in size from 25mm to 38mm in diameter and 1,520mm to 10,590mm in length.
3. Several items are listed with their voltage rating, size range, length, current rating and weight to specify their applications for transmission line work.
The document contains drawings and specifications for an IOHA display screen project. It includes a layout plan, elevations, sections and detailed drawings of the display stands and screens. The materials listed include brushed aluminum, acrylic, carpet and foam. Dimensions and notes provide instructions for assembly, such as polished welds and using magnets or adhesive for posters.
Studbolt Scotland - Full Brochure (Rev1)Paul Queen
The document is a catalog from Studbolt Scotland that provides information on fasteners and other industrial supplies. It includes sections on studbolts, nuts, bolts, washers, gaskets, and pipe supports. Studbolt Scotland stocks a wide range of petrochemical and industrial fasteners that meet various standards like ASME, DIN, ISO and ASTM. They can supply items from stock or on short lead times and also produce custom fasteners to customer specifications.
The document appears to be architectural plans for a residential property located at 4838 SW Comus St in Portland, Oregon. It includes site plans, elevations, floor plans, sections and details. The site plan shows topographic lines, proposed landscaping including trees and permeable pavers, and notes the lot size is 0.21 acres. Floor plans detail the basement, main and mezzanine/attic levels. Elevations depict the materials and features on each facade, including metal and wood siding, stone veneer and windows. Sections and details provide additional construction information. Dimensions, notes and schedules are included to fully convey the design and specifications of the proposed single family residence.
This document provides contact information for the sales, technical support, and international offices of Electrium Sales Limited, a Siemens company that produces electrical wiring accessories. It also includes a brief description of Crabtree, a brand of Electrium that offers wiring accessories that comply with British standards and are designed, manufactured, and tested in the UK. Crabtree products include switches, sockets, trunking, circuit protection devices, and accessories for various applications.
This document provides details about the first certified Passive House Plus project in Minnesota. It is a single-family home located in St. Paul that prioritizes views, accessibility, health, sustainability and energy efficiency. The building envelope and materials are designed to meet Passive House standards with high insulation values, an air-tight envelope, and triple-pane windows. Diagrams and details are included to illustrate the construction methods for walls, roof, foundation, and windows.
We have never compromised on the quality, response, timely delivery and other info to be provided to the customer. We believe in keeping the customers happy and providing them with products at a very Competitive price.
John guest-fittings with Nespl, Natron Equipment & Spares Pvt. Ltd. is delivering services par excellence and have constituted a team of expert professionals who drive passion & perfection into whatever they do.
1. NAVFAC SOUTHWEST
FY12 RM003-09 RESTORE BUILDING SYSTEMS
BUILDING 3230 (DENTAL CLINIC)
PAGE
CLIENT INFORMATION: DATE:
REVISION:
1-14-2015
5.2
SCALE 3”=1’-0”
SINGLE FACED
A
BRUSHED ALUMINUM
ESCUTCHEON
AIRCRAFT CABLE
RAISED 2 1/2” HIGH 1/8” THK. P95
SATIN WHITE LASER CUT ACRYLIC
LETTERING
BRUSHED ALUMINUM FRAME
WAITING/
RECEPTION
QTY: 1
0'-9"
2’-6”
1’-0”
0'-2 1/2"
1
BRUSHED ALUMINUM
P95 SATIN WHITE
1
2
3 P99 ACRYLIC
PTM PMS 433
2 LAYERS OF 1/8” THICK CLEAR ACRYLIC W/P99 FINISH
ACRYLIC BACKS PAINTED TO MATCH PMS 433
MOUNTED BACK TO BACK
2. NAVFAC SOUTHWEST
FY12 RM003-09 RESTORE BUILDING SYSTEMS
BUILDING 3230 (DENTAL CLINIC)
PAGE
CLIENT INFORMATION: DATE:
REVISION:
1-14-2015
5.2
1'-9"
DIRECTORY
DEPARTMENT
DEPARTMENT NAME 1
DEPARTMENT NAME 1
DEPARTMENT NAME 1
DEPARTMENT NAME 1
DEPARTMENT NAME 1
DEPARTMENT NAME 1
DEPARTMENT NAME 1
DEPARTMENT NAME 1
FLOOR DEPARTMENT FLOOR
DEPARTMENT NAME 2
DEPARTMENT NAME 2
DEPARTMENT NAME 2
DEPARTMENT NAME 2
DEPARTMENT NAME 2
DEPARTMENT NAME 2
DEPARTMENT NAME 2
DEPARTMENT NAME 2
RAISED 2” HIGH 1/8” THK. P95
SATIN WHITE LASER CUT ACRYLIC
LETTERING
RAISED 3/4” HIGH 1/8” THK. P95
SATIN WHITE LASER CUT ACRYLIC
LETTERING
ALUM. NAME PLATE TRACK
1 1/2” HIGH BLANK NAME PLATE INSERTS INCLUDED.
NAME ENGRAVING BY END USER.
1/8” THICK CLEAR ACRYLIC W/P99 FINISH
BACK PAINTED TO MATCH PMS 433
SCALE 3”=1’-0”
SINGLE FACED
B QTY: 4
0'-2"
0'-0 3/4"
0'-1 1/2"
2
BRUSHED STAINLESS
P95 SATIN WHITE
1
2
3 P99 ACRYLIC
PTM PMS 433
2'-4"
1’-0” 1’-0”0’-4”
3. NAVFAC SOUTHWEST
FY12 RM003-09 RESTORE BUILDING SYSTEMS
BUILDING 3230 (DENTAL CLINIC)
PAGE
CLIENT INFORMATION: DATE:
REVISION:
1-14-2015
5.2
DEPARTMENT
LOCATIONS
RAISED 2” HIGH 1/8” THK. P95
SATIN WHITE LASER CUT ACRYLIC
LETTERING
1/8” THICK CLEAR ACRYLIC W/P99 FINISH
BACK PAINTED TO MATCH PMS 433
SCALE 3”=1’-0”
SINGLE FACED
C QTY: 4
1’-4”
DEPARTMENT NAME
DEPARTMENT NAME
DEPARTMENT NAME
DEPARTMENT NAME
DEPARTMENT NAME
DEPARTMENT NAME
DEPARTMENT NAME
DEPARTMENT NAME
0'-2"
0'-2"
0'-1 1/2"
3
BRUSHED STAINLESS
P95 SATIN WHITE
1
2
3
ALUM. NAME PLATE TRACK
1 1/2” HIGH BLANK NAME PLATE INSERTS INCLUDED.
NAME ENGRAVING BY END USER.
P99 ACRYLIC
PTM PMS 433
1’-0” 1’-0”0’-4”
2'-4"
4. NAVFAC SOUTHWEST
FY12 RM003-09 RESTORE BUILDING SYSTEMS
BUILDING 3230 (DENTAL CLINIC)
PAGE
CLIENT INFORMATION: DATE:
REVISION:
1-14-2015
5.2
123
CONFERENCE
ROOM
0'-7"
0’-6”
0’-0 3/4”
0'-4"
SCALE HALF SIZE SCALE HALF SIZE
SINGLE FACED
D QTY: 3
1” HIGH ROWMARK TACTILE RAISED 1/32”
CHARACTERS
5/8” HIGH ROWMARK TACTILE RAISED 1/32”
CHARACTERS
SLIDING INTEGRAL COLORED OPAQUE
ACRYLIC PANEL
GRADE II BRAILLE
1/8” THICK CLEAR ACRYLIC W/P99 FINISH
BACK PAINTED TO MATCH PMS 433
4
IN USE
SINGLE FACED
G QTY: 143
OCCUPANT NAME
OCCUPANT NAME
P95 SATIN WHITE
1
2
3 P99 ACRYLIC
PTM PMS 433
BRUSHED STAINLESS
0’-6”
1” HIGH ROWMARK TACTILE RAISED 1/32”
CHARACTERS, TYPICAL LAYOUT
GRADE II BRAILLE
1/8” THICK CLEAR ACRYLIC W/P99 FINISH
BACK PAINTED TO MATCH PMS 433
ALUM. NAME PLATE TRACK
1 1/2” HIGH BLANK NAME PLATE
INSERTS INCLUDED.
NAME ENGRAVING BY END USER.
C1-100
DENTAL
TREATMENT
ROOM0’-9 1/2”
5/8” HIGH ROWMARK TACTILE RAISED 1/32”
CHARACTERS
5. NAVFAC SOUTHWEST
FY12 RM003-09 RESTORE BUILDING SYSTEMS
BUILDING 3230 (DENTAL CLINIC)
PAGE
CLIENT INFORMATION: DATE:
REVISION:
1-14-2015
5.2
5
SCALE HALF SIZE
SINGLE FACED
E.1 QTY: 4
1” HIGH ROWMARK TACTILE RAISED 1/32”
CHARACTERS
5/8” HIGH ROWMARK TACTILE RAISED 1/32”
CHARACTERS
GRADE II BRAILLE
1/8” THICK CLEAR ACRYLIC W/P99 FINISH
BACK PAINTED TO MATCH PMS 433
P95 SATIN WHITE
P99 ACRYLIC
PTM PMS 433
2
3
C2-92
PROSTHETICS
LAB
0’-6”
SCALE HALF SIZE
SINGLE FACED
E QTY: 37
1” HIGH ROWMARK TACTILE RAISED 1/32”
CHARACTERS
5/8” HIGH ROWMARK TACTILE RAISED 1/32”
CHARACTERS
GRADE II BRAILLE
1/8” THICK CLEAR ACRYLIC W/P99 FINISH
BACK PAINTED TO MATCH PMS 433
0'-4 1/2"
0'-5 1/2"
C2-04
WOMEN’S OFFICER/
PROVIDER LOCKER
ROOM
0’-8”
6. NAVFAC SOUTHWEST
FY12 RM003-09 RESTORE BUILDING SYSTEMS
BUILDING 3230 (DENTAL CLINIC)
PAGE
CLIENT INFORMATION: DATE:
REVISION:
1-14-2015
5.2
6
WOMEN MEN RESTROOM0'-0 5/8"
0'-6"
0'-10"
0'-8"
ROWMARK TACTILE
RAISED 1/32” CHARACTERS
5/8” HIGH ROWMARK TACTILE
RAISED 1/32” CHARACTERS
GRADE II BRAILLE
1/8” THICK CLEAR ACRYLIC
W/P99 FINISH. BACK PAINTED
TO MATCH PMS 433
SCALE HALF SIZE
SINGLE FACED
J J.1QTY: 5 QTY: 4 QTY: 2
P95 SATIN WHITE2
3 P99 ACRYLIC
PTM PMS 433
7. NAVFAC SOUTHWEST
FY12 RM003-09 RESTORE BUILDING SYSTEMS
BUILDING 3230 (DENTAL CLINIC)
PAGE
CLIENT INFORMATION: DATE:
REVISION:
1-14-2015
5.2
7
1'-0"
1'-0"
1’-0”
0’-10 3/8”
0’-6”
0'-6"
ROWMARK TACTILE RAISED 1/32”
CHARACTERS
1/8” THICK CLEAR ACRYLIC W/P99 FINISH
BACK PAINTED TO MATCH PMS 433
1/8” THICK CLEAR ACRYLIC W/P99 FINISH
BACK PAINTED TO MATCH PMS 433
1/8” THICK CLEAR ACRYLIC W/P99 FINISH
BACK PAINTED WHITE
SCALE HALF SIZE
SCALE 3”=1’-0”
SINGLE FACED
SINGLE FACED
K K.1QTY: 5
QTY: 4
P95 SATIN WHITE2
3 P99 ACRYLIC
PTM PMS 433
1’-0”
SCALE 3”=1’-0”
SINGLE FACED QTY: 2
0’-5 1/8”
8. NAVFAC SOUTHWEST
FY12 RM003-09 RESTORE BUILDING SYSTEMS
BUILDING 3230 (DENTAL CLINIC)
PAGE
CLIENT INFORMATION: DATE:
REVISION:
1-14-2015
5.2
8
EXIT
ROUTE
0’-6”
SCALE HALF SIZE
SINGLE FACED
L QTY: 4
1 1/2” HIGH ROWMARK TACTILE RAISED 1/32”
CHARACTERS
GRADE II BRAILLE
1/8” THICK CLEAR ACRYLIC W/P99 FINISH
BACK PAINTED TO MATCH PMS 433
0'-8"
P95 SATIN WHITE2
3 P99 ACRYLIC
PTM PMS 433
SCALE HALF SIZE
SINGLE FACED
M QTY: 4
ROWMARK TACTILE RAISED 1/32”
CHARACTERS
3/4” HIGH ROWMARK TACTILE RAISED 1/32”
CHARACTERS
GRADE II BRAILLE
1/8” THICK CLEAR ACRYLIC W/P99 FINISH
BACK PAINTED TO MATCH PMS 443
ELEVATOR
0'-7"
0’-6”
9. NAVFAC SOUTHWEST
FY12 RM003-09 RESTORE BUILDING SYSTEMS
BUILDING 3230 (DENTAL CLINIC)
PAGE
CLIENT INFORMATION: DATE:
REVISION:
1-14-2015
5.2
9
P95 SATIN WHITE2
3 P99 ACRYLIC
PTM PMS 433
ROWMARK TACTILE RAISED 1/32”
CHARACTERS
3/4” HIGH ROWMARK TACTILE RAISED 1/32”
CHARACTERS
GRADE II BRAILLE
1/8” THICK CLEAR ACRYLIC W/P99 FINISH
BACK PAINTED TO MATCH PMS 443
SCALE HALF SIZE
SINGLE FACED
M.1 QTY: 11
STAIR
0'-7"
0’-6”
10. NAVFAC SOUTHWEST
FY12 RM003-09 RESTORE BUILDING SYSTEMS
BUILDING 3230 (DENTAL CLINIC)
PAGE
CLIENT INFORMATION: DATE:
REVISION:
1-14-2015
5.2
10
2'-3"
1'-6" 0'-6"
0'-6"
0'-6"
3230
1/2” WIDE BORDER TO MATCH
PANTONE 557
NUMERALS TO MATCH PANTONE 557
ALUMINUM PANEL WITH
WHITE BACKGROUND
SCALE 3”=1’-0”
SINGLE FACED
Q QTY: 1
P95 SATIN WHITE
PANTONE
#19-4052 TPX
1
2
11. NAVFAC SOUTHWEST
FY12 RM003-09 RESTORE BUILDING SYSTEMS
BUILDING 3230 (DENTAL CLINIC)
PAGE
CLIENT INFORMATION: DATE:
REVISION:
1-14-2015
5.2
11
SCALE 3”=1’-0”
DOUBLE FACED
R
RAISED 2 1/2” HIGH 1/8” THK. P95
SATIN WHITE LASER CUT ACRYLIC
LETTERING
2 LAYERS OF 1/8” THICK CLEAR ACRYLIC W/P99 FINISH
ACRYLIC BACKS PAINTED TO MATCH PMS 433
MOUNTED BACK TO BACK
BRUSHED ALUMINUM FRAME
DENTAL CHECK IN
WAITING ROOM
QTY: 9
0'-2 1/2"
0'-2 1/2"
2’-6”
1’-0”
BRUSHED ALUMINUM
P95 SATIN WHITE
1
2
3 P99 ACRYLIC
PTM PMS 433
C1-26A
0’-6”
SCALE HALF SIZE
SINGLE FACED
S QTY: 1
1” HIGH ROWMARK TACTILE RAISED 1/32”
CHARACTERS
GRADE II BRAILLE
1/8” THICK CLEAR ACRYLIC W/P99 FINISH
BACK PAINTED TO MATCH PMS 433
0'-4 1/2"
12. NAVFAC SOUTHWEST
FY12 RM003-09 RESTORE BUILDING SYSTEMS
BUILDING 3230 (DENTAL CLINIC)
PAGE
CLIENT INFORMATION: DATE:
REVISION:
1-14-2015
5.2
12
Sterling Graphics warrants to its purchasers that all Sterling Graphics products sold
by it will be free of manufacturing and material defects and Guaranteed for 5 years,
commencing from date of nal install. If applicable, failure to use proper fasteners,
adhesives or other installation methods consistent with Sterling Graphics installation
instructions shall relieve Sterling Graphics of any liability. Any defective product will
be replaced free of any charge if a claim is presented in writing to Sterling Graphics.
Replacement will include shipment costs within the United States. Our liability under
this limited lifetime warranty is limited to replacement and does not include any
responsibility for incidental or consequential damages of any nature.
Limited Lifetime Warranty
Clean Up and Maintenance
Care should be taken when cleaning Tactile and Braille signage to prevent excess
moisture or cleaning solutions from contacting the letters and Braille. Excess moisture
and cleaning solutions may sleep behind letters and degrade the adhesion of the letters.
DO NOT use solvent based cleaners on room identication signage with Tactile and Braille.
9520 Chesapeake Drive Suite 603. San Diego, CA 92123 USA / 858-571-7144
www.sterlinggraphics.org/karen@sterlinggraphics.org
California Contractors State License # 721795