MP LiftTape is a specially developed masking tape for masking vehicle seals. It has a polyester lip that allows it to be easily inserted between the rubber seal and bodywork. This allows the seal to be pulled back and re-adhered to paint the area without visible edges. The perforations mean no cutting is needed. The separated lip can lift many common vehicle seals with just one tape. It has a small non-adhesive edge for quick application and removal.

1. MASKING SYSTEM
MP LiftTape
MASKING SYSTEM
Product Description:
NON-PAINTS CAR 3000
PL 07-22 / M-S 070
MP LiftTape is a specially developed masking tape
for the masking of seals on vehicles. The special
polyester lip enables a simple insertion (between
rubber seal and bodywork) for the subsequent
pulling back and sticking down of the rubber seals
in order to be able to paint from behind so that no
edges appear. Due to the perforations
of this band there is no cutting
equipment necessary. The
separated polyester lip from
MP Lift Tape enables the lifting
of all common seals on vehicles
with just one tape. Through a
small non-adhesive edge, the
tape can quickly be applied or removed.
Technical Data:
• 10 m roll x 50 mm
• 120°C temperature resistant and stable against water-based paints
• for the lifting and sticking-down of seals on vehicles
• separated polyester lip for lifting the various seals
• special masking tape with excellent tape-to-tape adhesion
• perforated transparent polyester strips with adhesive paper tape
Item-No. Description Unit
59387 0050 MP LiftTape 1
Email: mp@master-products.com • www.master-products.com

2. Lifting Tape
Characteristics
1195 is a special designed masking tape. A paper masking tape is combined with a strong polyester film as
an insertion lip. 1195 is silicone free.
Application
Special masking applications for rubber sealing on windows, wind shields, sun roofs, hoods and other trunk
apertures between bodyparts.
Technical Data
Carrier Special paper, low crepped
Insertion lip Polyester film
Total thickness 0,3mm
Adhesive base modified crosslinked rubber adhesive
Peel adhesion 4 N/cm
Temperature-resistance 1h/°C up to +150
Special characteristics water lacquer resistant
UV-resistance limited
Weather-resistance limited
Colour beige
This data sheet is for information purpose only. To our knowledge the data provided complies with
the latest standard and is based on years of experience in the manufacturing of our products.