This document contains the results of a wear test on an Mg Control S1 sample and ball at loads of 100mN and 150mN over 2000, 6000, and 10,000 cycles. It includes data on the coefficient of friction, wear scar size in mm, and a chart showing the wear scar profile increasing with load and cycles for both the ball and sample.

1. Mg Control S1

2. 2000 Cycle Wear Scar-Ball
Load: 100mN Load: 150mN

3. 2000 Cycle Wear Scar- Sample
Load: 100mN Load: 150mN

4. 6000 Cycle Wear Scar-Ball
Load: 100mN Load: 150mN

5. 6000 Cycle Wear Scar- Sample
Load: 100mN Load: 150mN

6. 10,000 Cycle Wear Scar-Ball
Load: 100mN Load: 150mN

7. 10,000 Cycle Wear Scar- Sample
Load: 100mN Load: 150mN

8. Data Results
0.117583
0.349591287
0.387298
0.118998
0.403103
0.532927543
0
0.1
0.2
0.3
0.4
0.5
0.6
2KC 6KC 10KC
COEFFICIENTOFFRICTION
CYCLES
Mg Control S1 Tests
100mN 150mN
0
0.05
0.21
0.3
0.2 0.2
0
0.06
0.36 0.38
0.53 0.54
0
0.1
0.2
0.3
0.4
0.5
0.6
Ball Sample Ball Sample Ball Sample
2000 6000 10000
WEARSCAR(MM)
CYCLES
Wear Scar Profile
100mN 150mN