This document is an excerpt from a Mercury Marine service manual. It provides information on using the manual, page numbering conventions, directional references, serial number locations, break-in procedures, decal application and removal, and painting procedures for aluminum propellers and gear housings. Specific instructions are given for cleaning, priming, and applying top coats to propellers and gear housings using recommended paint products to provide durable finishes comparable to factory applications.
Liebherr er 942 hydraulic excavator service repair manualudjjfkkskemm
The document is a service manual that provides technical data, maintenance guidelines, and information on systems for hydraulic excavators models ER 900-942. It covers general information, tools, the engine, coupling and splitterbox, hydraulic system, hydraulic components, electrical system, swing gear, swing ring, travel gear, track components, undercarriage and uppercarriage attachments, cab heater and air conditioning. The manual is intended to assist with maintenance and repairs for the excavator models.
Jcb js115 t2 excavator service repair manual sn 2397465 and upudjjfkkskemm
The document provides maintenance instructions for steel tracks on excavators. It includes procedures to check track components for wear, measure critical dimensions, and compare measurements to tolerance charts to determine replacement needs. Key components like links, pins, bushes and the sprocket are to be inspected, with links also checked for distortion. Measurements of dimensions like track tension, pin pitch and bush diameter indicate wear percentages and guide maintenance decisions.
Jcb 540 v140 telescopic handler service repair manual sn from 2460601 onwardsudjjfkkskemm
This service manual provides instructions for servicing the Loadall rough terrain variable reach truck. It contains sections on the machine systems including the engine, fuel system, cooling system, brake system, hydraulic system and electrical system. The section summarized focuses on servicing the engine valves and connecting rod big-end bearings. It provides removal and installation instructions, component identification diagrams, and technical specifications for the valves and instructions to check the big-end bearings for wear.
Jcb 540 200 telescopic handler service repair manual sn from 2902000 onwardsudjjfkkskemm
This service manual provides information on servicing the Loadall rough terrain variable reach truck. It contains instructions that were originally provided by the manufacturer and covers systems like the engine, brakes, hydraulics, and electrical systems. The manual instructs technicians to study it before operating or maintaining the machine to prevent injury or death. It also contains sections on safety, maintenance procedures, technical specifications, and the removal and installation of components.
Jcb 540 170 telescopic handler service repair manual sn from 2460601 onwardsudjjfkkskemm
This service manual provides instructions for servicing the Loadall rough terrain variable reach truck. It contains sections on the machine systems including the engine, fuel system, cooling system, brake system, hydraulic system and electrical system. The section summarized focuses on servicing the engine valves and connecting rod big-end bearings. It provides removal and installation instructions, component identification diagrams, and technical specifications for the valves and instructions to check the big-end bearings for wear.
Jcb 535 95 tier 4 telescopic handler service repair manual sn from 2460601 on...udjjfkkskemm
This service manual provides instructions for servicing the components of a Loadall rough terrain variable reach truck, including the fuel injection system. The document covers removal and installation procedures for fuel injectors, injector seals, the common fuel rail, and the high pressure fuel injection pump. Safety information is provided throughout regarding working on the fuel system and the need to relieve pressure before conducting repairs.
Jcb 536 60 tier 4 telescopic handler service repair manual sn from 2460601 on...udjjfkkskemm
This document provides service and repair instructions for fuel injectors on JCB Loadall vehicles. It begins with an introduction to the injector components and operation. The main sections provide procedures for checking injector operation with diagnostic tools, removing and installing individual injectors, and removing and installing injector seals in the cylinder head. The summary highlights that the document contains procedures for inspecting and replacing fuel injectors and their seals.
Jcb 526 56 telescopic handler service repair manual sn 2336575 and upudjjfkkskemm
This service manual provides information for servicing and repairing Loadall rough terrain variable reach trucks. It contains instructions for machine components, attachments, body and framework, operator station, heating and air conditioning, engine, fuel and exhaust systems, cooling system, brake system, steering system, driveline, hydraulic system, and electrical system. The manual instructs technicians on removal and installation of components like the engine, and provides torque specifications and other technical details.
Liebherr er 942 hydraulic excavator service repair manualudjjfkkskemm
The document is a service manual that provides technical data, maintenance guidelines, and information on systems for hydraulic excavators models ER 900-942. It covers general information, tools, the engine, coupling and splitterbox, hydraulic system, hydraulic components, electrical system, swing gear, swing ring, travel gear, track components, undercarriage and uppercarriage attachments, cab heater and air conditioning. The manual is intended to assist with maintenance and repairs for the excavator models.
Jcb js115 t2 excavator service repair manual sn 2397465 and upudjjfkkskemm
The document provides maintenance instructions for steel tracks on excavators. It includes procedures to check track components for wear, measure critical dimensions, and compare measurements to tolerance charts to determine replacement needs. Key components like links, pins, bushes and the sprocket are to be inspected, with links also checked for distortion. Measurements of dimensions like track tension, pin pitch and bush diameter indicate wear percentages and guide maintenance decisions.
Jcb 540 v140 telescopic handler service repair manual sn from 2460601 onwardsudjjfkkskemm
This service manual provides instructions for servicing the Loadall rough terrain variable reach truck. It contains sections on the machine systems including the engine, fuel system, cooling system, brake system, hydraulic system and electrical system. The section summarized focuses on servicing the engine valves and connecting rod big-end bearings. It provides removal and installation instructions, component identification diagrams, and technical specifications for the valves and instructions to check the big-end bearings for wear.
Jcb 540 200 telescopic handler service repair manual sn from 2902000 onwardsudjjfkkskemm
This service manual provides information on servicing the Loadall rough terrain variable reach truck. It contains instructions that were originally provided by the manufacturer and covers systems like the engine, brakes, hydraulics, and electrical systems. The manual instructs technicians to study it before operating or maintaining the machine to prevent injury or death. It also contains sections on safety, maintenance procedures, technical specifications, and the removal and installation of components.
Jcb 540 170 telescopic handler service repair manual sn from 2460601 onwardsudjjfkkskemm
This service manual provides instructions for servicing the Loadall rough terrain variable reach truck. It contains sections on the machine systems including the engine, fuel system, cooling system, brake system, hydraulic system and electrical system. The section summarized focuses on servicing the engine valves and connecting rod big-end bearings. It provides removal and installation instructions, component identification diagrams, and technical specifications for the valves and instructions to check the big-end bearings for wear.
Jcb 535 95 tier 4 telescopic handler service repair manual sn from 2460601 on...udjjfkkskemm
This service manual provides instructions for servicing the components of a Loadall rough terrain variable reach truck, including the fuel injection system. The document covers removal and installation procedures for fuel injectors, injector seals, the common fuel rail, and the high pressure fuel injection pump. Safety information is provided throughout regarding working on the fuel system and the need to relieve pressure before conducting repairs.
Jcb 536 60 tier 4 telescopic handler service repair manual sn from 2460601 on...udjjfkkskemm
This document provides service and repair instructions for fuel injectors on JCB Loadall vehicles. It begins with an introduction to the injector components and operation. The main sections provide procedures for checking injector operation with diagnostic tools, removing and installing individual injectors, and removing and installing injector seals in the cylinder head. The summary highlights that the document contains procedures for inspecting and replacing fuel injectors and their seals.
Jcb 526 56 telescopic handler service repair manual sn 2336575 and upudjjfkkskemm
This service manual provides information for servicing and repairing Loadall rough terrain variable reach trucks. It contains instructions for machine components, attachments, body and framework, operator station, heating and air conditioning, engine, fuel and exhaust systems, cooling system, brake system, steering system, driveline, hydraulic system, and electrical system. The manual instructs technicians on removal and installation of components like the engine, and provides torque specifications and other technical details.
Jcb 250 skid steer loader service repair manual sn from 2675500 to 2675700udjjfkkskemm
This service manual provides instructions for servicing skid steer loaders and their engines. It details removing and installing the engine bedplate, which acts as the main strength component and maintains alignment of internal engine parts. The multi-step procedure requires cleaning parts, applying sealant, installing bearing shells and bolts, and torquing bolts to specified values. Special tools like templates and torque wrenches are needed to correctly complete the process.
Jcb 250 skid steer loader service repair manual sn from 2478301 to 2478700udjjfkkskemm
This service manual provides instructions for servicing JCB skid steer loaders and their components. It contains sections on machine systems and components including the engine, fuel system, cooling system, brakes, driveline, hydraulics, and electrical system. The section summarized here provides instructions for removing and installing the crankshaft from the engine. It describes cleaning and inspecting the crankshaft, lists the required tools and consumables, and outlines the step-by-step removal and installation procedures.
Jcb 9 tst dumper service repair manual sn from grm0011 to grm9989udjjfkkskemm
This service manual provides instructions for servicing the braking system of dumpers. It contains information on health and safety when working on the brakes, technical specifications, component identification, troubleshooting, and bleeding the brakes. The braking system uses mineral oil and contains separate front and rear brake circuits for safety. Adjustment is generally not needed as the brakes are self-adjusting, but bleeding may be required if the brake lines leak fluid.
Jcb 9 tft dumper service repair manual sn from hrm1382 to hrm4003udjjfkkskemm
This service manual provides instructions for servicing the braking system of dumpers. It contains information on health and safety when working on the brakes, technical specifications, component identification, troubleshooting, and bleeding the brakes. The braking system uses mineral oil and contains separate front and rear brake circuits for safety. Adjustment is generally not needed as the brakes are self-adjusting, but bleeding may be required if the brake lines leak fluid.
Jcb 5 cx wastemaster eco backhoe loader service repair manual sn from 2442701...udjjfkkskemm
This service manual section provides information on servicing the crankshaft and related components on a backhoe loader. It includes identification of parts, technical specifications, operation descriptions, removal and installation instructions, and check/inspection procedures. Proper cleaning and installation of the crankshaft oil seal is critical to prevent oil leakage. Removal and installation of the crankshaft requires carefully following all steps while ensuring components remain clean and undamaged.
Jcb 5 cx backhoe loader service repair manual sn from 2509500 and upudjjfkkskemm
This service manual provides instructions for servicing the crankshaft on a backhoe loader. The crankshaft is a core component that connects the pistons to the flywheel. Key steps in servicing the crankshaft include cleaning it and inspecting the journals for wear. The crankshaft needs to be removed to service other engine components like the main bearings. Proper installation requires cleaning surfaces, installing new cooling jets, lubricating bearings, and fitting thrust washers in the correct orientation. Following the removal and installation procedures helps ensure the crankshaft operates properly.
Jcb 4 cx backhoe loader service repair manual sn from 2442701 to 2451000udjjfkkskemm
This service manual provides instructions for servicing the crankshaft on a backhoe loader. The crankshaft is a core component that connects the pistons to the flywheel. Key steps in servicing the crankshaft include cleaning the crankcase and bearings, checking crankshaft dimensions, installing new piston cooling jets, and properly positioning the thrust washers between the crankshaft and rear main bearing. Technicians must follow all removal and installation procedures carefully to ensure the crankshaft and related components are correctly serviced.
Jcb 3 cx compact backhoe loader service repair manual (sn from 2495456 and up)udjjfkkskemm
This service manual provides instructions for servicing a JCB 3CX Compact backhoe loader. It contains sections covering the machine systems including the engine, fuel system, cooling system, brake system, hydraulic system and electrical system. The specific section summarized discusses servicing procedures for the engine crankshaft, including how to check its condition and operation, how to remove and install the crankshaft, and specifications for servicing.
Jcb 3 cx backhoe loader service repair manual sn from 2442701 to 2451000udjjfkkskemm
This service manual provides instructions for servicing the crankshaft on a backhoe loader. The crankshaft is a core component that connects the pistons to the flywheel. Key steps in servicing the crankshaft include cleaning the crankcase and bearings, checking crankshaft dimensions, installing new piston cooling jets, and carefully inserting the crankshaft while aligning the thrust washers and bearing shells. Thorough cleaning is emphasized to prevent blocked oil passages from causing engine failure.
Claas axion 850 810 (type a09) tractor service repair manualudjjfkkskemm
1) The document provides instructions for removing and refitting the front axle of a CLAAS AXION 850-810 tractor. It describes dismantling the axle, epicyclic reducer, and joint unit.
2) Dismantling the front axle involves removing components like the housing, drive shaft, wheels, and bearings. The epicyclic reducer and joint unit also require removal of parts like planet gears, seals, and bearings.
3) Refitting the front axle follows the reverse order, with components like wheels, bearings, seals and housing replaced and tightened to the specified torques. The epicyclic reducer and joint unit also require reinstallation of dismantled parts and
Caterpillar cat th337 c telehandler operator and maintenance manualudjjfkkskemm
This document provides an operation and maintenance manual for several models of JLG telehandlers. It contains important safety information and instructions for pre-operation inspection, operation of controls and indicators, and general safety practices. The manual should be kept with the machine at all times. Operators must be trained and qualified, and follow all safety procedures and instructions contained within the manual. Contact information is provided for accident reporting or questions.
Caterpillar cat th336 c telehandler operator and maintenance manualudjjfkkskemm
This document provides an operation and maintenance manual for several models of telehandlers. It contains important safety information and instructions for operation, maintenance, and emergency procedures. Operators must read the entire manual and follow all safety procedures. The manual includes sections on general safety practices, pre-operation inspection, controls and indicators, operation, attachments and hitches, emergency procedures, lubrication and maintenance, additional checks, and specifications.
Caterpillar cat 305.5 e mini hydraulic excavator (prefix fky) service repair ...udjjfkkskemm
The document provides instructions for removing and installing various track components on a 305.5E Mini Hydraulic Excavator, including the front idler, recoil spring, hydraulic track adjuster, and sprocket. The procedures describe removing bolts and pins, compressing springs with tools, and lifting components by weight. Safety precautions are provided for releasing spring tension.
Caterpillar cat 303.5 e2 cr mini hydraulic excavator (prefix cr9) service rep...udjjfkkskemm
This service repair manual provides instructions for removing and installing various engine components on a Caterpillar 303.5E2 CR Mini Hydraulic Excavator, including fuel injection lines, nozzles, and the governor and camshaft. The document outlines the removal and installation procedures, noting important safety information and component identification.
Caterpillar cat 301.7 d mini hydraulic excavator (prefix ljh) service repair ...udjjfkkskemm
This document provides instructions for removing and installing various components on a 301.7D Mini Hydraulic Excavator, including the final drive, travel motor, swivel, swing motor, swing drive, ball valve for the adjustable undercarriage, and undercarriage cylinder. The procedures describe draining fluid, disconnecting hoses, and removing bolts and components. Safety precautions are provided regarding springs under pressure, contamination of hydraulic systems, and pressurized cylinders.
Caterpillar cat 140 h motor grader (prefix 126) service repair manual (126000...udjjfkkskemm
The document provides step-by-step instructions for disassembling and assembling the final drive components of a 140H Motor Grader. It describes removing 23 components including planetary gears, shafts, seals, and housings. Assembly involves installing these components in reverse order, noting that some bearings require preheating and pressing, and shims must be selected to achieve proper clearance between components. Precision tools and torque specifications are listed to ensure correct assembly.
Caterpillar cat 140 h motor grader (prefix 5hm) service repair manual (5hm000...udjjfkkskemm
This document provides instructions for removing and installing the front gear group on a Caterpillar 3306B engine. The removal process involves taking off the automatic timing advance unit, fuel pump idler gear, camshaft gear, and timing gear plate. The installation involves cleaning surfaces, installing a new gasket on the timing gear plate, and reinstalling the gears and plate along with applying thread lock compound to bolts. Special attention is paid to ensuring the fuel rack moves freely in the fuel injection pump housing.
Caterpillar cat 140 g motor grader (prefix 72v) service repair manual (72v042...udjjfkkskemm
This document provides instructions for removing and installing the camshaft and camshaft bearings on a Caterpillar 3306 engine. It outlines the necessary steps including removing timing gears, camshaft drive gear, and camshaft. It emphasizes keeping parts clean and provides illustrations of the component locations. Installation involves aligning timing marks, lubricating parts, and reinstalling components in reverse order.
Liebherr r964 c 1651 hydraulic excavator service repair manualudjjfkkskemm
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Jcb 250 skid steer loader service repair manual sn from 2675500 to 2675700udjjfkkskemm
This service manual provides instructions for servicing skid steer loaders and their engines. It details removing and installing the engine bedplate, which acts as the main strength component and maintains alignment of internal engine parts. The multi-step procedure requires cleaning parts, applying sealant, installing bearing shells and bolts, and torquing bolts to specified values. Special tools like templates and torque wrenches are needed to correctly complete the process.
Jcb 250 skid steer loader service repair manual sn from 2478301 to 2478700udjjfkkskemm
This service manual provides instructions for servicing JCB skid steer loaders and their components. It contains sections on machine systems and components including the engine, fuel system, cooling system, brakes, driveline, hydraulics, and electrical system. The section summarized here provides instructions for removing and installing the crankshaft from the engine. It describes cleaning and inspecting the crankshaft, lists the required tools and consumables, and outlines the step-by-step removal and installation procedures.
Jcb 9 tst dumper service repair manual sn from grm0011 to grm9989udjjfkkskemm
This service manual provides instructions for servicing the braking system of dumpers. It contains information on health and safety when working on the brakes, technical specifications, component identification, troubleshooting, and bleeding the brakes. The braking system uses mineral oil and contains separate front and rear brake circuits for safety. Adjustment is generally not needed as the brakes are self-adjusting, but bleeding may be required if the brake lines leak fluid.
Jcb 9 tft dumper service repair manual sn from hrm1382 to hrm4003udjjfkkskemm
This service manual provides instructions for servicing the braking system of dumpers. It contains information on health and safety when working on the brakes, technical specifications, component identification, troubleshooting, and bleeding the brakes. The braking system uses mineral oil and contains separate front and rear brake circuits for safety. Adjustment is generally not needed as the brakes are self-adjusting, but bleeding may be required if the brake lines leak fluid.
Jcb 5 cx wastemaster eco backhoe loader service repair manual sn from 2442701...udjjfkkskemm
This service manual section provides information on servicing the crankshaft and related components on a backhoe loader. It includes identification of parts, technical specifications, operation descriptions, removal and installation instructions, and check/inspection procedures. Proper cleaning and installation of the crankshaft oil seal is critical to prevent oil leakage. Removal and installation of the crankshaft requires carefully following all steps while ensuring components remain clean and undamaged.
Jcb 5 cx backhoe loader service repair manual sn from 2509500 and upudjjfkkskemm
This service manual provides instructions for servicing the crankshaft on a backhoe loader. The crankshaft is a core component that connects the pistons to the flywheel. Key steps in servicing the crankshaft include cleaning it and inspecting the journals for wear. The crankshaft needs to be removed to service other engine components like the main bearings. Proper installation requires cleaning surfaces, installing new cooling jets, lubricating bearings, and fitting thrust washers in the correct orientation. Following the removal and installation procedures helps ensure the crankshaft operates properly.
Jcb 4 cx backhoe loader service repair manual sn from 2442701 to 2451000udjjfkkskemm
This service manual provides instructions for servicing the crankshaft on a backhoe loader. The crankshaft is a core component that connects the pistons to the flywheel. Key steps in servicing the crankshaft include cleaning the crankcase and bearings, checking crankshaft dimensions, installing new piston cooling jets, and properly positioning the thrust washers between the crankshaft and rear main bearing. Technicians must follow all removal and installation procedures carefully to ensure the crankshaft and related components are correctly serviced.
Jcb 3 cx compact backhoe loader service repair manual (sn from 2495456 and up)udjjfkkskemm
This service manual provides instructions for servicing a JCB 3CX Compact backhoe loader. It contains sections covering the machine systems including the engine, fuel system, cooling system, brake system, hydraulic system and electrical system. The specific section summarized discusses servicing procedures for the engine crankshaft, including how to check its condition and operation, how to remove and install the crankshaft, and specifications for servicing.
Jcb 3 cx backhoe loader service repair manual sn from 2442701 to 2451000udjjfkkskemm
This service manual provides instructions for servicing the crankshaft on a backhoe loader. The crankshaft is a core component that connects the pistons to the flywheel. Key steps in servicing the crankshaft include cleaning the crankcase and bearings, checking crankshaft dimensions, installing new piston cooling jets, and carefully inserting the crankshaft while aligning the thrust washers and bearing shells. Thorough cleaning is emphasized to prevent blocked oil passages from causing engine failure.
Claas axion 850 810 (type a09) tractor service repair manualudjjfkkskemm
1) The document provides instructions for removing and refitting the front axle of a CLAAS AXION 850-810 tractor. It describes dismantling the axle, epicyclic reducer, and joint unit.
2) Dismantling the front axle involves removing components like the housing, drive shaft, wheels, and bearings. The epicyclic reducer and joint unit also require removal of parts like planet gears, seals, and bearings.
3) Refitting the front axle follows the reverse order, with components like wheels, bearings, seals and housing replaced and tightened to the specified torques. The epicyclic reducer and joint unit also require reinstallation of dismantled parts and
Caterpillar cat th337 c telehandler operator and maintenance manualudjjfkkskemm
This document provides an operation and maintenance manual for several models of JLG telehandlers. It contains important safety information and instructions for pre-operation inspection, operation of controls and indicators, and general safety practices. The manual should be kept with the machine at all times. Operators must be trained and qualified, and follow all safety procedures and instructions contained within the manual. Contact information is provided for accident reporting or questions.
Caterpillar cat th336 c telehandler operator and maintenance manualudjjfkkskemm
This document provides an operation and maintenance manual for several models of telehandlers. It contains important safety information and instructions for operation, maintenance, and emergency procedures. Operators must read the entire manual and follow all safety procedures. The manual includes sections on general safety practices, pre-operation inspection, controls and indicators, operation, attachments and hitches, emergency procedures, lubrication and maintenance, additional checks, and specifications.
Caterpillar cat 305.5 e mini hydraulic excavator (prefix fky) service repair ...udjjfkkskemm
The document provides instructions for removing and installing various track components on a 305.5E Mini Hydraulic Excavator, including the front idler, recoil spring, hydraulic track adjuster, and sprocket. The procedures describe removing bolts and pins, compressing springs with tools, and lifting components by weight. Safety precautions are provided for releasing spring tension.
Caterpillar cat 303.5 e2 cr mini hydraulic excavator (prefix cr9) service rep...udjjfkkskemm
This service repair manual provides instructions for removing and installing various engine components on a Caterpillar 303.5E2 CR Mini Hydraulic Excavator, including fuel injection lines, nozzles, and the governor and camshaft. The document outlines the removal and installation procedures, noting important safety information and component identification.
Caterpillar cat 301.7 d mini hydraulic excavator (prefix ljh) service repair ...udjjfkkskemm
This document provides instructions for removing and installing various components on a 301.7D Mini Hydraulic Excavator, including the final drive, travel motor, swivel, swing motor, swing drive, ball valve for the adjustable undercarriage, and undercarriage cylinder. The procedures describe draining fluid, disconnecting hoses, and removing bolts and components. Safety precautions are provided regarding springs under pressure, contamination of hydraulic systems, and pressurized cylinders.
Caterpillar cat 140 h motor grader (prefix 126) service repair manual (126000...udjjfkkskemm
The document provides step-by-step instructions for disassembling and assembling the final drive components of a 140H Motor Grader. It describes removing 23 components including planetary gears, shafts, seals, and housings. Assembly involves installing these components in reverse order, noting that some bearings require preheating and pressing, and shims must be selected to achieve proper clearance between components. Precision tools and torque specifications are listed to ensure correct assembly.
Caterpillar cat 140 h motor grader (prefix 5hm) service repair manual (5hm000...udjjfkkskemm
This document provides instructions for removing and installing the front gear group on a Caterpillar 3306B engine. The removal process involves taking off the automatic timing advance unit, fuel pump idler gear, camshaft gear, and timing gear plate. The installation involves cleaning surfaces, installing a new gasket on the timing gear plate, and reinstalling the gears and plate along with applying thread lock compound to bolts. Special attention is paid to ensuring the fuel rack moves freely in the fuel injection pump housing.
Caterpillar cat 140 g motor grader (prefix 72v) service repair manual (72v042...udjjfkkskemm
This document provides instructions for removing and installing the camshaft and camshaft bearings on a Caterpillar 3306 engine. It outlines the necessary steps including removing timing gears, camshaft drive gear, and camshaft. It emphasizes keeping parts clean and provides illustrations of the component locations. Installation involves aligning timing marks, lubricating parts, and reinstalling components in reverse order.
Liebherr r964 c 1651 hydraulic excavator service repair manualudjjfkkskemm
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
3. 90-12934--2 1097 i
Models Covered in This Manual
Transom Assemblies
Model Serial Number
MC 120R/140B/185R/488R/898R/228R/260R 6216687 – 6849289
MC 120MR/140MR/170MR/185MR/190MR/200MR/
230MR/260MR/300 Tempest MR
6849290 – 0A471374
MC Alpha One/Alpha One SS 0A471375 and Above
Sterndrive Units
MC 120R-260R
Original Ratio Ratio If Serviced With 13:21 Gears Serial Number
1.98:1 1.94:1 6237861-6854392
1.84:1 1.81:1 6225577-6862701
1.65:1 1.62:1 6268065-6810537
1.50:1 1.47:1 6229158-6847029
1.32:1 1.29:1 6231571-6663947
MC 120 MR - 300 TEMPEST MR
Original Ratio Ratio If Serviced With 13:28 Gears Serial Number
1.98:1 1.94:1 6854393-0A476746
1.84:1 1.81:1 6862702-0A470164
1.65:1 1.62:1 6810538-0A475786
1.50:1 1.47:1 6847030-0A479506
MC ALPHA ONE / ALPHA ONE SS
Original Ratio
Ratio If Serviced With
13:28 Gears
R.H. Serial Number L.H. Serial Number
1.98:1 1.98:1 0A476747 and Above 0C881740 and Above
1.84:1 1.84:1 0A470165 and Above 0C884040 and Above
1.65:1 1.65:1 0A475787 and Above 0C881790 and Above
1.50:1 1.50:1 0A479507 and Above 0C852908 and Above
1.32:1 1.32:1 0A613927 and Above
Alpha One SS
1.50:1/1.32:1
1.50/1.32:1 0A545004 and Above
4. 90-12934--2 1097ii
Sea Ray Sterndrive Units and Transom Assembly (Oyster White)
Original Ratio Ratio If Serviced With 13:21 Gears Serial Number
1.98:1 0B803866-0C348031
1.84:1 0B800854-0C343526
1.50:1 0B796473-0C340666
1.32:1 0B804807-0C340030
Transom Assembly 0B815811-0C340333
When making repairs to Sea Ray (Oyster White) sterndrives, follow procedures as outlined for corresponding
MerCruiser models as shown in the cross-reference chart below.
Sea Ray MerCruiser
3.0L 3.0L Alpha One
4.3L2 4.3L Alpha One
4.3L4 4.3LX Alpha One
5.7L 5.7L Alpha One
SRX 5.7L 350 Magnum Alpha One
SRX 7.4L 454 Magnum Alpha One
5. 90-12934--2 1097 iii
Notice
Throughout this publication, “Warnings” and “Cau-
tions” (accompanied by the International HAZARD
symbol ! ) are used to alert the mechanic to special
instructions concerning a particular service or opera-
tion that may be hazardous if performed incorrectly
or carelessly. — OBSERVE THEM CAREFULLY!
These “Safety Alerts” alone cannot eliminate the
hazards that they signal. Strict compliance to these
special instructions when performing the service,
plus “common sense” operation, are major accident
prevention measures.
DANGER!
DANGER - Immediate hazards which will result in
severe personal injury or death.
! WARNING
WARNING - Hazards or unsafe practices which
COULD result in severe personal injury or death.
! CAUTION
CAUTION - Hazards or unsafe practices which
could result in minor personal injury or product
or property damage.
IMPORTANT: Indicates information or instruc-
tions that are necessary for proper operation
and/or maintenance.
Notice To Users of This Manual
This service manual has been written and published
by the service department of the manufacturer to aid
our dealers’ mechanics and company service per-
sonnel when servicing the product described herein.
It is assumed that these personnel are familiar with
the servicing procedures of this product, or like or
similar products. That they have been trained in the
recommended servicing procedures of these prod-
ucts which includes the use of mechanics’ common
hand tools from other suppliers.
We could not possibly know of and advise the service
trade of all conceivable procedures by which a
service might be performed and of all possible
hazards and/or result of each method. We have not
undertaken any such wise evaluation. Therefore,
anyone who uses a service procedure and/or tool
which is not recommended by the manufacturer, first
must completely satisfy himself that neither his nor
the product’s safety will be endangered by the
service procedure selected.
All information, illustrations, and specifications con-
tained in this manual are based on the latest product
information available at time of publication.
As required, revisions to this manual will be sent to
all dealers contracted by us to sell and/or service
these products.
6. 90-12934--2 1097iv
Replacement Parts
! WARNING
Electrical system components on gasoline
engines and MerCruiser Stern Drives are
designed and manufactured to comply with U.S.
Coast Guard Rules and Regulations to minimize
risks of fire or explosion.
Use of replacement electrical system compo-
nents, which do not comply to these rules and
regulations, could result in a fire or explosion
hazard and should be avoided.
When servicing electrical systems, it is extremely
important that all components are properly installed
and tightened. If not, any electrical component
opening would permit sparks to ignite fuel vapors
from fuel system leaks, if they exist or develop.
! WARNING
Electrical system components on diesel engines
are not external ignition protected. DO NOT
STORE OR UTILIZE GASOLINE ON BOATS
EQUIPPED WITH THESE ENGINES, UNLESS
PROVISIONS HAVE BEEN MADE TO EXCLUDE
GASOLINE VAPORS FROM ENGINE COMPART-
MENT (ref: 33 CFR). Failure to comply could result
in fire, explosion and/or severe personal injury.
7. Important
Information
Removal, Installation
and Adjustments
Sterndrive Unit
Transom Assembly
Power Trim
Steering Systems
Corrosion Protection
1
2
3
4
5
6
7
90-12934--2 1097 v
Service Manual Outline
Section 1 - Important Information
A - Important Information
B - Maintenance
C - Troubleshooting
Section 2 - Removal, Installation and Adjustments
A - All Models
Section 3 - Sterndrive Unit
A - Drive Shaft Housing
B - Gear Housing - MR/Alpha One/Alpha One SS
C - Gear Housing - I-R
D - Gear Housing - Alpha One Counter Rotation
Section 4 - Transom Assembly
A - Service Procedures Requiring Minor
Disassembly
B - Service Procedures Requiring Major
Disassembly
Section 5 - Power Trim
A - Oildyne Power Trim Pump (Plastic Reservoir)
B - Oildyne Power Trim Pump (Aluminum Reservoir)
C - Prestolite Power Trim Pump
D - Trim Cylinders
E - Dual Power Trim Control
F - Auto Trim II
Section 6 - Steering Systems
A - Power Steering
B - Manual Steering
Section 7 - Corrosion Protection
A - All Models
10. IMPORTANT INFORMATION - 1A-190-12934--2 1097
How To Use This Manual
This Manual is divided into sections which represent
major components and systems.
Some sections are further divided into parts which
more fully describe the component.
Sections and parts are listed on page.
Page Numbering
Two number groups appear at the bottom of each
page. Following is an example and description.
Introduction
This comprehensive overhaul and repair manual is
designed as a service guide for the MerCruiser
models previously listed. It provides specific
information, including procedures for disassembly,
inspection, assembly and adjustment, to enable
dealers and service mechanics to repair these
products.
Before attempting repairs, it is suggested that proce-
dure first be read through to gain knowledge of the
methods and tools used and the cautions and
warnings required for safety.
Special Product Information
During production of these models, special product
improvements and changes have been made to
increase product reliability and performance. Such
changes to a sterndrive assembly component(s) are
covered in the “Special Information” portion of the
appropriate sterndrive assembly section. (Refer to
the section “Index”.) Serial number breaks are
provided, where applicable, for ease of identification.
Directional References
Front of boat is bow; rear is stern. Starboard side is
right side; port side is left side. In this service manual,
all directional references are given as they appear
when viewing boat from stern, looking toward bow.
Propeller Rotation
Propeller rotation for sterndrive can be right hand or
left hand rotation as viewed from the aft end of the
propeller.
22266 22267
Right Hand Rotation Left Hand Rotation
11. 1A-2 - IMPORTANT INFORMATION 90-12934--2 1097
Serial Number Locations
23254
Transom Assembly Serial Number Location
a - Transom Assembly Serial Number
23254
Sterndrive Unit Serial Number Location – Port Decal
a - Sterndrive Unit Serial Number
b - Sterndrive Unit Gear Ratio
Hi-Performance Boating
Written by marine engineers, order Part No.
90-86168, entitled “Hi-Performance Boat Opera-
tion.”
Sterndrive Unit 10-Hour
Break-In Period (New or with
Replacement Gears)
1. Avoid full throttle starts.
2. DO NOT operate at any one constant speed for
extended periods of time.
3. DO NOT exceed 75% of full throttle during the
first 5 hours. During the next 5 hours, operate at
intermittent full throttle.
4. Drive unit should be shifted into forward gear a
minimum of 10 times during break-in, with run-in
time at moderate RPM after each shift.
Decal Application
Decal Removal
1. Mark decal location before removal to assure
proper alignment of new decal.
2. Carefully soften decal and decal adhesive with a
heat gun or heat blower while removing old decal.
3. Clean decal contact area with a 1:1 mixture of iso-
propyl alcohol and water.
4. Thoroughly dry decal contact area and check for
a completely cleaned surface.
TEMPERATURE
IMPORTANT: Installation of vinyl decals should
not be attempted while in direct sunlight. Air and
surface temperature should be between 60°F
(15°C) and 100°F (38°C) for best application.
SURFACE PREPARATION
IMPORTANT: Do not use a soap or any petroleum
based solvents to clean application surface.
Decal Application
NOTE: Ensure area where decal will be applied is
clean.
1. Remove backing from decal.
2. Apply to drive unit.
3. Carefully smooth decal on surface.
12. IMPORTANT INFORMATION - 1A-390-12934--2 1097
Painting Procedures
Cleaning & Painting Aluminum
Propellers & Gear Housings
! WARNING
Avoid serious injury from flying debris. Avoid se-
rious injury from airborne particles. Use eye and
breathing protection with proper ventilation.
PROPELLERS
1. Sand the entire area to be painted with 3M 120
Regalite Polycut or coarse Scotch-Brite, disc or
belts.
2. Feather edges of all broken paint edges. Try not
to sand through the primer.
3. Clean the surface to be painted using PPG
Industries DX330 Wax and Grease Remover or
equivalent (Xylene or M.E.K.).
4. If bare metal has been exposed, use Quicksil-
ver’s Light Gray Primer.
5. Allow a minimum of 1 hour dry time and no more
than 1 week before applying the finish coat.
6. Apply the finish coat using Quicksilver’s EDP
Propeller Black.
GEAR HOUSINGS
The following procedures should be used in refinish-
ing gear housings. This procedure will provide the
most durable paint system available in the field. The
materials recommended are of high quality and
approximate marine requirements. The following
procedure will provide a repaint job that compares
with a properly applied factory paint finish. It is rec-
ommended that the listed materials be purchased
from a local Ditzler Automotive Finish Supply Outlet.
The minimum package quantity of each material
shown following is sufficient to refinish several gear
housings.
Procedure:
1. Wash gear housing with a muriatic acid base
cleaner to remove any type of marine growth and
rinse with water, if necessary.
2. Wash gear housing with soap and water, then
rinse.
3. Sand blistered area with 3M 180 grit sandpaper
or P180 Gold Film Disc to remove paint blisters
only. Feather edge all broken paint edges.
4. Clean gear housing thoroughly with (DX-330)
wax and grease remover.
5. Spot repair surfaces where bare metal is ex-
posed with (DX-503) alodine treatment.
IMPORTANT: Do not use any type of aerosol
spray paints as the paint will not properly adhere
to the surface nor will the coating be sufficiently
thick to resist future paint blistering.
6. Mix epoxy chromate primer (DP-40) with equal
part catalyst (DP-401) per manufacturer’s
instructions, allowing proper induction period for
permeation of the epoxy primer and catalyst.
7. Allow a minimum of one hour drying time and no
more than one week before top coating assem-
blies.
8. Use Ditzler Urethane DU9000 for Mercury Black
and DU33414M for Sea Ray White. Catalyze all
three colors with Ditzler DU5 catalyst mixed 1:1
ratio. Reduce with solvents per Ditzler label.
! CAUTION
Be sure to comply with instructions on the label
for ventilation and respirators. Using a spray
gun, apply one half to one mil even film thick-
ness. Let dry, flash off for five minutes and apply
another even coat of one half to one mil film thick-
ness. This urethane paint will dry to the touch in
a matter of hours, but will remain sensitive to
scratches and abrasions for a few days.
9. The type of spray gun used will determine the
proper reduction ratio of the paint.
IMPORTANT: Do not paint sacrificial trim tab or
anode.
10. Cut out a cardboard “plug” for trim tab pocket to
keep paint off of mating surface to maintain good
continuity circuitry between trim tab and gear
housing.
15. 90-12934--2 1097 REMOVAL, INSTALLATION AND ADJUSTMENT 2A-1
Specifications
Torque Specifications
NOTE: Listed below are the torque specifications for
those fasteners which have a specific torque value.
Tighten all other fasteners (not listed) securely.
DESCRIPTION
TORQUE
DESCRIPTION
lb. in. lb. ft. N⋅m
Exhaust Pipe To Gimbal
Housing Screws
20-25 27-34
Power Trim Cylinder To An-
chor Pin Nut
Tighten Until Nut Just
Bottoms Out
Propeller
55
(Min.)
75
(Min.)
Shift Cable End Guide At-
taching Nuts
Tighten Until Nut Bot-
toms And Then Loosen
1/2 Turn
Steering Cable Coupler
Nut
35 48
Steering Cable Coupler
Nut Locking Plate Screw
60-72 7-8
Steering System Pivot
Bolts
25 34
Sterndrive Unit To Bell
Housing Attaching Nuts
50 68
Transom Assembly Attach-
ing Screws and Nuts
20-25 27-34
Power Steering Hydraulic
Hose Fitting - Large
20-25 27-34
Power Steering Hydraulic
Hose Fitting - Small
96-108 11-12
Lubricants/Sealers/
Adhesives
Description Part No.
Quicksilver 2-4-C Marine
Lubricant With Teflon
92-825407A3
Quicksilver Special Lubricant 101 92-13872A1
Liquid Neoprene 92-25711-2
Perfect Seal 92-34227--1
Engine Coupler Spline Grease 92-816391A4
Special Installation Tools
Description Part No.
Alignment Tool Assembly 91-805475A1
Engine Alignment Tool 91-57797A3
Special Information
Transom Specifications
22170
a - Transom Thickness-to Be 2 In. (51 mm) Minimum To 2-1/4
in. (57 mm) Maximum
b - Transom Surfaces-MUST BE Parallel Within 1/8 in. (3.2
mm) Measured At Top And Bottom Of Cutout Hole
c - Area Covered By Inner Transom Plate-MUST BE Flat
Within 1/8 in. (3.2 mm)
d - Area Covered By Gimbal Housing Assembly-MUST BE
Flat Within 1/16 in. (1.6 mm)
e - Transom Angle-10_ to 16_
f - Keel (If Equipped)-Remove 4 Ft. (1.2m) Forward To Tran-
som
16. 2A-2 –REMOVAL, INSTALLATION AND ADJUSTMENTS 90-12934--2 1097
Checking Transom
Thickness
Ensure transom surface thickness and flatness con-
form to minimums specified in “Installation Require-
ments” listed previously.
70004
a
b
a - Measuring Thickness
b - Measuring Flatness
75479
a
a - Suitable Mandrel To Check For Uniform Transom Thick-
ness
NOTE: Transom must be between 2” (51 mm) and
2-1/4” (57 mm) a distance of 8” (203 mm) to either
side of the vertical centerline.
Sterndrive Unit Removal
1. Move remote control shift lever into the forward
gear position.
2. Remove power trim cylinders (aft end) from drive
shaft housing.
22060
22441
a - Anchor Pin
b - Washers (2)-Large I.D.
c - Rubber Bushings (4)
d - Washer (2)-Small I.D.
e - Locknuts (2)
f - Plastic Caps (2)
17. 90-12934--2 1097 REMOVAL, INSTALLATION AND ADJUSTMENT 2A-3
3. If installed, remove and cap remote oil reservoir
hose. Remove adaptor fitting and plug drive unit
vent hole.
23253
a - Oil Reservoir Hose
b - Adaptor Fitting
4. Remove locknuts and washers holding drive unit
to bell housing. Keep ground plate secured to
drive shaft housing. Pull drive unit straight away
from bell housing.
22062
a - Locknuts (6)-Remove
b - Washers (5)-Remove
c - Ground Plate
d - Sterndrive Unit
5. Remove bell housing gasket.
22062
a
a - Bell Housing Gasket
Transom Assembly Removal
1. If equipped, remove power steering assembly as
follows:
a. Remove cotter pin and clevis pin from clevis.
Loosen the cable retaining nut. Disconnect
clevis from steering lever.
b. Remove cotter pin and clevis pin from the
steering lever. Disconnect steering cable
from clevis.
22023
a - Cable End
b - Clevis
c - Cotter Pin
d - Clevis Pin
e - Locking Plate
f - Cable Retaining Nut
g - Steering Lever
h - Cotter Pin
i - Clevis Pin
18. 2A-4 –REMOVAL, INSTALLATION AND ADJUSTMENTS 90-12934--2 1097
c. Bend tab on tab washer down. Loosen pivot
bolts or remove pivot pins. Use a screw to re-
move pivot pins. Remove power steering
unit.
23256
Power Steering Units Secured With Pivot Bolts
23256
Power Steering Units Secured With Pivot Pins
a - Power Steering Unit
b - Tab Washer
c - Pivot Bolt
a - Power Steering Unit
b - Cotter Pins
c - Pivot Pins
2. If equipped, disconnect manual steering as
follows:
a. Remove cotter pin and clevis pin from clevis.
Loosen the cable retaining nut. Disconnect
clevis from steering lever.
or
b. Remove cotter pin and clevis pin from the
steering lever. Disconnect steering cable
from clevis.
22055
Single Installation Models
a - Steering Lever
b - Steering Cable
c - Cotter Pin
d - Clevis Pin
50483
Dual Installation Models
a - Steering Lever
b - Clevis Assembly
c - Steering Cable
d - Cotter Pin
e - Clevis Pin
f - Tie Bar
19. 90-12934--2 1097 REMOVAL, INSTALLATION AND ADJUSTMENT 2A-5
c. Bend tab on tab washer down. Loosen pivot
bolts or remove pivot pins. Use a screw to re-
move pivot pins. Remove manual steering
ring.
22945
Manual Steering Units Secured With Pivot Bolts
23256
Manual Steering Units Secured With Pivot Pins
a - Swivel Ring
b - Tab Washer-Bend tab
c - Pivot Bolt
a - Swivel Ring
b - Cotter Pins-Remove
c - Pivot Pins
3. Remove engine (Refer to appropriate Engine
Service Manual).
4. Disconnect trim limit switch wires and trim posi-
tion sender wires.
5. Remove power trim pump hydraulic hoses. Cap
hoses and plug pump fitting holes.
6. Remove sta-strap and disconnect trim limit
switch wires.
22031
Oildyne Power Trim Pump (Plastic Reservoir)
50483
Oildyne Power Trim Pump (Metal Reservoir)
a - Sta-Strap
b - Trim Limit Switch Wires
c - Hydraulic Hoses
20. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
21. 2A-6 –REMOVAL, INSTALLATION AND ADJUSTMENTS 90-12934--2 1097
50483
Prestolite Power Trim Pump
a - Sta-Strap
b - Trim Limit Switch Wires
c - Hydraulic Hoses
7. If installed, remove exhaust pipe.
22054
In-line 4 Cylinder Models
a - Exhaust Pipe
b - Screws
22057
V6/V8 Models
a - Exhaust Pipe
b - Screws
8. Remove ground wire from steering lever.
22028
a - Steering Lever
b - Ground Wire
c - Screws
22. 90-12934--2 1097 REMOVAL, INSTALLATION AND ADJUSTMENT 2A-7
9. Separate inner transom plate from transom gim-
bal housing assembly.
22058
a - Short Screws With Lock Washers
b - Flat Washers And Locknuts
c - Long Screws, Lock Washers And Square Flat Washers
d - Flat Washers And Locknuts (Securing Anode Head Bolts)
e - Hydraulic Hoses
f - Drive Unit Shift Cable
g - Trim Limit And Trim Position Sender Wires
h - Inner Transom Plate
i - Ground Wire (Continuity Circuit)
j - Mercathode Wires (If Equipped)
Transom Assembly
Installation
! CAUTION
Rubber seal MUST BE installed on anode head
bolts, or water will leak into boat.
22028
Non MerCathode Models
a - Anode Head
b - Rubber Seal
50094
MerCathode Models
a - Plastic Cap
b - Rubber Seal
! CAUTION
Steering lever ground wire MUST BE positioned
as shown or wire may fatigue.
23. 2A-8 –REMOVAL, INSTALLATION AND ADJUSTMENTS 90-12934--2 1097
22028
a - Steering Lever
b - Inner Transom Plate
c - Ground Wire
IMPORTANT: Torque bolts and nuts evenly (start-
ing from center and working out) to 20-25 lb. ft.
(27-34 N·m).
IMPORTANT: Be sure to pull all wires and cables
completely through inner transom plate and en-
sure wires are not pinched.
1. Install transom assembly. Tighten attaching bolts
and nuts evenly (starting from center and working
out). Torque to 20-25 lb. ft. (27-34 N·m).
22058
a - Short Screws And Lock Washers
b - Flat Washers And Locknuts
c - Long Screws, Lock Washers And Square Flat Washers
d - Flat Washers And Locknuts (Securing Anode Head Bolts)
e - Hydraulic Hoses
f - Drive Unit Shift Cable
g - Trim Limit Switch And Trim Position Sender Wires
h - Inner Transom Plate
i - Gimbal Housing To Inner Transom Plate Ground Wire
j - Steering Lever Ground Wire
k - Mercathode Wires (If Equipped)