This document lists bushings and their minimum and maximum diameters in millimeters for various shaft sizes. There are over 50 listings of bushings with minimum and maximum diameters ranging from around 9 mm to over 200 mm.
This document contains data on the flow rate and pressure for different orifice sizes of edge cutter nozzles. It lists orifice diameters from 0.4mm to 1.2mm and measures flow rate in liters per minute and pressure in megapascals at increments from 0.5 to 5.0. It also provides technical details on the dimensions and materials of the nozzle components as well as their applications in paper trimming, timber cutting, and precise component cleaning.
This document provides specifications for the 59T-3 Triplex Plunger Pump including:
- Pump sizes and models that can achieve maximum discharge pressures ranging from 970 psi to 10,000 psi.
- Standard materials used for fluid end bodies including cast ductile iron, forged/plate carbon steel, and cast duplex stainless steel depending on the pump model.
- Dimensions, weights, oil capacities, and performance data at various speeds for each pump size and model.
- Accessory gear reduction units available from 3.00:1 to 5.17:1 ratio.
This document provides specifications for various structural steel profiles including their dimensions, weight, cross-sectional area, and other engineering properties. Specifically, it contains this information for steel beams ranging in size from 12 inches by 3 1/2 inches down to 3 inches by 1 3/4 inches, across 10 different sizes and with steel grades ranging from 10 to 14. The specifications include the beam's designation, dimensions, weight, area, section properties like the moment of inertia, and other metrics.
This document contains details from multiple cycling events in France between June and August 2020, including date, location, distance, and rankings of participants from different clubs and categories. For each event, it lists the distances covered and rankings of participants identified with their club or category codes. The levels included local, intermediate provincial, provincial, national, and international categories.
This document contains qualifying time standards for swimming competitions in France from 2013-2014. It lists the minimum qualifying times for women and men in various age categories (14-19 years old and 19+) for different stroke and distance events. Times are provided in minutes and seconds. The standards are broken into two tables - one for 2013/2014 and one for 2009/2012 which contains additional events if an athlete qualifies in a 50m event in the 2013/2014 table.
Supporting data for analysis in Dow 20000 blog post. Explains difference in returns impact for price-weighted names in the Dow Jones Industrial average and market-capitalization names in the S&P 500 Index. Data is for illustrative purposes only to point out the potential differences in index performance driven by the "methods under the hood."
The document is a conversion table listing equivalencies between pole inches and millimeters. It provides over 100 measurements ranging from 1/128th of an inch to 1 inch in increments of 1/128th of an inch. For each pole inch measurement, the equivalent millimeter measurement is provided. The table is intended to help with conversions between the two unit systems.
nbr5648 pipe fittings,PPR pipe fittings for hot and cold water(Fiber-Glass Reinforced PP-R Pipes,PPR-AL-PPR pipe, PPR-AL-PE pipe, PPR-AL-PERT pipe and stable state aluminum plastic composite pipe), pvc-u pipes and fittings and valves, PPR pipe cutters and welding machines, PVC-U BS threaded fittings for water supply, CPVC ASTM D2846 pipes and fittings, CPVC SCH80 pipes and fittings, UPVC SCH80 pipes and fittings, PVC-U SCH40 pipes and fittings, DIN NBR5648 pipe and fittings for water supply, IRS pipe fittings, PPH BS Threaded pipes and fittings, PVC pressure pipes and fittings, PVC pressure rubber ring joint pipes and fittings with gasket, PVC pressure pipes & fittings for drainage, DWV ASTM D2665 PVCU pipes and fittings, PP sound proof drainage pipe and fittings, PP sound proof drainage pipes & fittings, PVC gutter system for rain water, PP compression fittings for irrigation, over-lapped Aluminum plastic pipes and fittings, butt-welded Aluminum plastic pipes and fittings, pex-a pipes, pex-b pipes, PEX-EVOH pipes, PERT pipes and fittings, Multi-layer pipes and brass fittings, sliding pex brass fittings, pipe clamps, Galvanized iron pipe and fittings, brass and stainless steel pipe and fittings, zinc alloy and brass valves and fittings, shark-bite brass fittings, push-fit brass fittings, Taps/Faucets, shower heads, Shower fittings,Polyethylene(HDPE) pipes and fittings, Polyethylene spirally enwound structure wall pipes, HDPE 100 Water pipes, HDPE 80 Water pipes, HDPE 100 gas pipes, butt-fusion HDPE pipes and fittings, butt-weld HDPE pipes and fittings, socket fusion HDPE pipes and fittings, HDPE valves and fittings, HDPE quick connection fittings, HDPE clamp saddles, HDPE electro-fusion pipe fittings, electro-fusion tapping saddle, HDPE soil & waste system fittings, HDPE geothermal pipes and fittings. Solar panels, solar power inverters, solar controllers, solar batteries, solar electric cookers, solar pumps. All kinds of plastic molds and injection machines, plastic pipe and panel production lines.
This document contains data on the flow rate and pressure for different orifice sizes of edge cutter nozzles. It lists orifice diameters from 0.4mm to 1.2mm and measures flow rate in liters per minute and pressure in megapascals at increments from 0.5 to 5.0. It also provides technical details on the dimensions and materials of the nozzle components as well as their applications in paper trimming, timber cutting, and precise component cleaning.
This document provides specifications for the 59T-3 Triplex Plunger Pump including:
- Pump sizes and models that can achieve maximum discharge pressures ranging from 970 psi to 10,000 psi.
- Standard materials used for fluid end bodies including cast ductile iron, forged/plate carbon steel, and cast duplex stainless steel depending on the pump model.
- Dimensions, weights, oil capacities, and performance data at various speeds for each pump size and model.
- Accessory gear reduction units available from 3.00:1 to 5.17:1 ratio.
This document provides specifications for various structural steel profiles including their dimensions, weight, cross-sectional area, and other engineering properties. Specifically, it contains this information for steel beams ranging in size from 12 inches by 3 1/2 inches down to 3 inches by 1 3/4 inches, across 10 different sizes and with steel grades ranging from 10 to 14. The specifications include the beam's designation, dimensions, weight, area, section properties like the moment of inertia, and other metrics.
This document contains details from multiple cycling events in France between June and August 2020, including date, location, distance, and rankings of participants from different clubs and categories. For each event, it lists the distances covered and rankings of participants identified with their club or category codes. The levels included local, intermediate provincial, provincial, national, and international categories.
This document contains qualifying time standards for swimming competitions in France from 2013-2014. It lists the minimum qualifying times for women and men in various age categories (14-19 years old and 19+) for different stroke and distance events. Times are provided in minutes and seconds. The standards are broken into two tables - one for 2013/2014 and one for 2009/2012 which contains additional events if an athlete qualifies in a 50m event in the 2013/2014 table.
Supporting data for analysis in Dow 20000 blog post. Explains difference in returns impact for price-weighted names in the Dow Jones Industrial average and market-capitalization names in the S&P 500 Index. Data is for illustrative purposes only to point out the potential differences in index performance driven by the "methods under the hood."
The document is a conversion table listing equivalencies between pole inches and millimeters. It provides over 100 measurements ranging from 1/128th of an inch to 1 inch in increments of 1/128th of an inch. For each pole inch measurement, the equivalent millimeter measurement is provided. The table is intended to help with conversions between the two unit systems.
nbr5648 pipe fittings,PPR pipe fittings for hot and cold water(Fiber-Glass Reinforced PP-R Pipes,PPR-AL-PPR pipe, PPR-AL-PE pipe, PPR-AL-PERT pipe and stable state aluminum plastic composite pipe), pvc-u pipes and fittings and valves, PPR pipe cutters and welding machines, PVC-U BS threaded fittings for water supply, CPVC ASTM D2846 pipes and fittings, CPVC SCH80 pipes and fittings, UPVC SCH80 pipes and fittings, PVC-U SCH40 pipes and fittings, DIN NBR5648 pipe and fittings for water supply, IRS pipe fittings, PPH BS Threaded pipes and fittings, PVC pressure pipes and fittings, PVC pressure rubber ring joint pipes and fittings with gasket, PVC pressure pipes & fittings for drainage, DWV ASTM D2665 PVCU pipes and fittings, PP sound proof drainage pipe and fittings, PP sound proof drainage pipes & fittings, PVC gutter system for rain water, PP compression fittings for irrigation, over-lapped Aluminum plastic pipes and fittings, butt-welded Aluminum plastic pipes and fittings, pex-a pipes, pex-b pipes, PEX-EVOH pipes, PERT pipes and fittings, Multi-layer pipes and brass fittings, sliding pex brass fittings, pipe clamps, Galvanized iron pipe and fittings, brass and stainless steel pipe and fittings, zinc alloy and brass valves and fittings, shark-bite brass fittings, push-fit brass fittings, Taps/Faucets, shower heads, Shower fittings,Polyethylene(HDPE) pipes and fittings, Polyethylene spirally enwound structure wall pipes, HDPE 100 Water pipes, HDPE 80 Water pipes, HDPE 100 gas pipes, butt-fusion HDPE pipes and fittings, butt-weld HDPE pipes and fittings, socket fusion HDPE pipes and fittings, HDPE valves and fittings, HDPE quick connection fittings, HDPE clamp saddles, HDPE electro-fusion pipe fittings, electro-fusion tapping saddle, HDPE soil & waste system fittings, HDPE geothermal pipes and fittings. Solar panels, solar power inverters, solar controllers, solar batteries, solar electric cookers, solar pumps. All kinds of plastic molds and injection machines, plastic pipe and panel production lines.
This document provides specifications for various sizes of structural steel profiles including circular, rectangular, and square shapes. It lists the nominal and actual dimensions, wall thickness, static properties such as area, moment of inertia, radius of gyration, plastic modulus, and elastic modulus for bending and torsion. Properties are provided for different steel grades including black and galvanized.
This document provides specifications for various forged steel pipe fittings including elbows, tees, crosses, and laterals. It lists nominal pipe sizes, dimensions, and approximate weights per 100 pieces for each fitting type in both inch and metric units. The fittings are rated for Class 3000 and Class 6000 threaded service and include dimensions that comply with ASME B16.11 standards as well as some that are larger.
This document provides the results of the Copper Mountain Spring Cool Down moguls event held on April 9, 2016. Skyler Nunn placed first in the female competition with a score of 80.67. The event was held at Copper Mountain on the Rosie's course, which was 212 meters long and 10 meters wide with a pitch of 24 degrees. Wendy Lana served as the head judge.
The document is a catalog listing technical specifications for tubular fittings of various diameters, wall thicknesses, and standards. It provides the nominal diameter, outer diameter, length, and wall thicknesses for fittings according to different SCH (Schedule) standards, as well as the mass of each fitting. Sizes range from 3/4" to 10" nominal diameter and SCH 10 to SCH 160 wall thicknesses.
This document contains a table listing nominal pipe sizes from 15.5 mm to 1200 mm with corresponding outer diameter, shipping volume per cubic meter, and weight in kilograms per meter for plain end mass. The table provides this information for standard and extra strong wall thicknesses. Contact information is provided at the bottom for ArcelorMittal's projects in different regions.
This document provides standard sectional dimensions and properties of equal angle steel and double angle steel. It includes dimensions such as length, width, thickness, radius of gyration, sectional area, unit weight, and moments of inertia. Properties are listed for standard sizes ranging from 25x25mm to 250x250mm.
This document provides standard sectional dimensions and properties of equal angle steel and double angle steel. It includes dimensions such as length, width, thickness, radius of gyration, sectional area, unit weight, and moments of inertia. Properties are listed for standard sizes ranging from 25x25mm to 250x250mm.
This document provides a table with information on shaft diameters before threading in different measurement systems including metric (mm), BSW, UNC, UNF, PG, and others. It lists shaft sizes from M1 to M52 in metric measurements and their equivalents in other systems like inches. The table also includes information on thread sizes for each shaft diameter.
This document appears to be a catalog from a Mexican steel company called Aceros Alcalde. It lists the company's contact information and locations, and provides a detailed catalog of the various steel products it offers for sale, including angles, flats, structural shapes, pipes, plates, wire, and other items. It also includes specifications like dimensions, weights, and technical information for the different products.
dwv pvc drainage pipes fittings astm d2665 d2441,PPR pipe fittings for hot and cold water(Fiber-Glass Reinforced PP-R Pipes,PPR-AL-PPR pipe, PPR-AL-PE pipe, PPR-AL-PERT pipe and stable state aluminum plastic composite pipe), pvc-u pipes and fittings and valves, PPR pipe cutters and welding machines, PVC-U BS threaded fittings for water supply, CPVC ASTM D2846 pipes and fittings, CPVC SCH80 pipes and fittings, UPVC SCH80 pipes and fittings, PVC-U SCH40 pipes and fittings, DIN NBR5648 pipe and fittings for water supply, IRS pipe fittings, PPH BS Threaded pipes and fittings, PVC pressure pipes and fittings, PVC pressure rubber ring joint pipes and fittings with gasket, PVC pressure pipes & fittings for drainage, DWV ASTM D2665 PVCU pipes and fittings, PP sound proof drainage pipe and fittings, PP sound proof drainage pipes & fittings, PVC gutter system for rain water, PP compression fittings for irrigation, over-lapped Aluminum plastic pipes and fittings, butt-welded Aluminum plastic pipes and fittings, pex-a pipes, pex-b pipes, PEX-EVOH pipes, PERT pipes and fittings, Multi-layer pipes and brass fittings, sliding pex brass fittings, pipe clamps, Galvanized iron pipe and fittings, brass and stainless steel pipe and fittings, zinc alloy and brass valves and fittings, shark-bite brass fittings, push-fit brass fittings, Taps/Faucets, shower heads, Shower fittings,Polyethylene(HDPE) pipes and fittings, Polyethylene spirally enwound structure wall pipes, HDPE 100 Water pipes, HDPE 80 Water pipes, HDPE 100 gas pipes, butt-fusion HDPE pipes and fittings, butt-weld HDPE pipes and fittings, socket fusion HDPE pipes and fittings, HDPE valves and fittings, HDPE quick connection fittings, HDPE clamp saddles, HDPE electro-fusion pipe fittings, electro-fusion tapping saddle, HDPE soil & waste system fittings, HDPE geothermal pipes and fittings. Solar panels, solar power inverters, solar controllers, solar batteries, solar electric cookers, solar pumps. All kinds of plastic molds and injection machines, plastic pipe and panel production lines.
AIS Torque Cal, Torque Chart and Bolting Pattern.pdfWorawitBoonnaeb
The document provides information on bolt stress, pressure, length, and diameter conversion factors. It includes a table with specifications for various bolt sizes including diameter, length, yield strength, torque values, and references. It also details calculations for determining bolt load and torque values based on factors like bolt material, lubricant used, and other specifications.
This document contains tables listing machuelo thread specifications including measurements in inches and millimeters, number of threads per inch, and equivalent decimal measurements. The tables provide information on machuelo diameters, thread sizes, and drill bit diameters needed to correspond with different machuelo sizes for American/UNC, metric, and NPT thread standards.
Massey ferguson mf 860 combines ( 174619115) parts catalogue manualfhsjejkdmem
This document provides a list of parts for the paddle elevator, shafts and drives, and table to cylinder components for Massey Ferguson MF 860/865 combines. It includes over 100 line items specifying part numbers, quantities, descriptions and additional comments for various components. Reference information is provided at the end for some specific combine models and components.
Massey ferguson mf 865 combines ( 174619115) parts catalogue manualfhsjejkdmem
This document provides a list of parts for the paddle elevator, shafts and drives, and table to cylinder components for Massey Ferguson MF 860/865 combines. It includes over 100 line items specifying part numbers, quantities, descriptions and additional comments for various components. Reference information is provided at the end for some specific combine models and components.
Pipe fitting . in forged fitting manufatuers, supplier, dealer in mumbai ,in...DivyaDarshanMetallic
This document provides specifications for forged high pressure pipe fittings including:
1. Elbows, tees, crosses, couplings, caps, plugs, bushings, unions, and nipples in sizes from 1/8" to 4" made from carbon steel, stainless steel, or alloy steel.
2. Fittings are available with threaded, socket-weld, or butt-welding ends and pressure ratings from 2000 to 9000 pounds.
3. Dimensions, material specifications, markings, finishes and other details are provided according to standards like ASME and ASTM.
The document contains specifications for various platewheel chain configurations including tooth radius, pitch, width, tooth widths, and dimensions for different sizes labeled ASA25A-1 through ASA80-1-2-3. It provides the parameters for platewheels in a table with the measurement values listed according to the platewheel size.
This document provides specifications for various standard H-beam, wide flange, lip channel, and equal angle steel sections. It includes dimensions such as height, width, thickness, area, weight, moments of inertia, radii of gyration, and other geometric properties. Sections range in size from 100x100 mm to 588x300 mm for H-beams, 148x100 mm to 500x200 mm for wide flanges, 100x50x20 mm to 200x75x20 mm for lip channels, and 40x40 mm to 120x120 mm for equal angles. Properties are specified in metric units.
Massey ferguson mf 865 combines ( 174619115) parts catalogue manualfjskekdmmse
This document provides the parts list and descriptions for the paddle elevator, shafts and drives, and table to cylinder components of Massey Ferguson MF 860/865 combines. It contains over 90 line items with part numbers, quantities, descriptions, and additional comments for various parts. Reference information is provided at the end of each section to indicate applicability of certain parts based on combine model or configuration.
Massey ferguson mf 860 combines ( 174619115) parts catalogue manualfjskekdmmse
This document provides the parts list and descriptions for the paddle elevator, shafts and drives, and table to cylinder components of Massey Ferguson MF 860/865 combines. It contains over 90 line items with part numbers, quantities, descriptions, and additional comments for various parts. Reference information is provided at the end of each section to indicate applicability of certain parts to specific combine models and configurations.
Massey ferguson mf 865 combines ( 174619115) parts catalogue manualofpsdjksemmds
This document provides the parts list and descriptions for the paddle elevator, shafts and drives, and table to cylinder components of Massey Ferguson MF 860/865 combines. It contains over 90 line items with part numbers, quantities, descriptions, and additional comments for various parts. Reference information is provided at the end of each section to indicate applicability of certain parts based on combine model or configuration.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
This document provides specifications for various sizes of structural steel profiles including circular, rectangular, and square shapes. It lists the nominal and actual dimensions, wall thickness, static properties such as area, moment of inertia, radius of gyration, plastic modulus, and elastic modulus for bending and torsion. Properties are provided for different steel grades including black and galvanized.
This document provides specifications for various forged steel pipe fittings including elbows, tees, crosses, and laterals. It lists nominal pipe sizes, dimensions, and approximate weights per 100 pieces for each fitting type in both inch and metric units. The fittings are rated for Class 3000 and Class 6000 threaded service and include dimensions that comply with ASME B16.11 standards as well as some that are larger.
This document provides the results of the Copper Mountain Spring Cool Down moguls event held on April 9, 2016. Skyler Nunn placed first in the female competition with a score of 80.67. The event was held at Copper Mountain on the Rosie's course, which was 212 meters long and 10 meters wide with a pitch of 24 degrees. Wendy Lana served as the head judge.
The document is a catalog listing technical specifications for tubular fittings of various diameters, wall thicknesses, and standards. It provides the nominal diameter, outer diameter, length, and wall thicknesses for fittings according to different SCH (Schedule) standards, as well as the mass of each fitting. Sizes range from 3/4" to 10" nominal diameter and SCH 10 to SCH 160 wall thicknesses.
This document contains a table listing nominal pipe sizes from 15.5 mm to 1200 mm with corresponding outer diameter, shipping volume per cubic meter, and weight in kilograms per meter for plain end mass. The table provides this information for standard and extra strong wall thicknesses. Contact information is provided at the bottom for ArcelorMittal's projects in different regions.
This document provides standard sectional dimensions and properties of equal angle steel and double angle steel. It includes dimensions such as length, width, thickness, radius of gyration, sectional area, unit weight, and moments of inertia. Properties are listed for standard sizes ranging from 25x25mm to 250x250mm.
This document provides standard sectional dimensions and properties of equal angle steel and double angle steel. It includes dimensions such as length, width, thickness, radius of gyration, sectional area, unit weight, and moments of inertia. Properties are listed for standard sizes ranging from 25x25mm to 250x250mm.
This document provides a table with information on shaft diameters before threading in different measurement systems including metric (mm), BSW, UNC, UNF, PG, and others. It lists shaft sizes from M1 to M52 in metric measurements and their equivalents in other systems like inches. The table also includes information on thread sizes for each shaft diameter.
This document appears to be a catalog from a Mexican steel company called Aceros Alcalde. It lists the company's contact information and locations, and provides a detailed catalog of the various steel products it offers for sale, including angles, flats, structural shapes, pipes, plates, wire, and other items. It also includes specifications like dimensions, weights, and technical information for the different products.
dwv pvc drainage pipes fittings astm d2665 d2441,PPR pipe fittings for hot and cold water(Fiber-Glass Reinforced PP-R Pipes,PPR-AL-PPR pipe, PPR-AL-PE pipe, PPR-AL-PERT pipe and stable state aluminum plastic composite pipe), pvc-u pipes and fittings and valves, PPR pipe cutters and welding machines, PVC-U BS threaded fittings for water supply, CPVC ASTM D2846 pipes and fittings, CPVC SCH80 pipes and fittings, UPVC SCH80 pipes and fittings, PVC-U SCH40 pipes and fittings, DIN NBR5648 pipe and fittings for water supply, IRS pipe fittings, PPH BS Threaded pipes and fittings, PVC pressure pipes and fittings, PVC pressure rubber ring joint pipes and fittings with gasket, PVC pressure pipes & fittings for drainage, DWV ASTM D2665 PVCU pipes and fittings, PP sound proof drainage pipe and fittings, PP sound proof drainage pipes & fittings, PVC gutter system for rain water, PP compression fittings for irrigation, over-lapped Aluminum plastic pipes and fittings, butt-welded Aluminum plastic pipes and fittings, pex-a pipes, pex-b pipes, PEX-EVOH pipes, PERT pipes and fittings, Multi-layer pipes and brass fittings, sliding pex brass fittings, pipe clamps, Galvanized iron pipe and fittings, brass and stainless steel pipe and fittings, zinc alloy and brass valves and fittings, shark-bite brass fittings, push-fit brass fittings, Taps/Faucets, shower heads, Shower fittings,Polyethylene(HDPE) pipes and fittings, Polyethylene spirally enwound structure wall pipes, HDPE 100 Water pipes, HDPE 80 Water pipes, HDPE 100 gas pipes, butt-fusion HDPE pipes and fittings, butt-weld HDPE pipes and fittings, socket fusion HDPE pipes and fittings, HDPE valves and fittings, HDPE quick connection fittings, HDPE clamp saddles, HDPE electro-fusion pipe fittings, electro-fusion tapping saddle, HDPE soil & waste system fittings, HDPE geothermal pipes and fittings. Solar panels, solar power inverters, solar controllers, solar batteries, solar electric cookers, solar pumps. All kinds of plastic molds and injection machines, plastic pipe and panel production lines.
AIS Torque Cal, Torque Chart and Bolting Pattern.pdfWorawitBoonnaeb
The document provides information on bolt stress, pressure, length, and diameter conversion factors. It includes a table with specifications for various bolt sizes including diameter, length, yield strength, torque values, and references. It also details calculations for determining bolt load and torque values based on factors like bolt material, lubricant used, and other specifications.
This document contains tables listing machuelo thread specifications including measurements in inches and millimeters, number of threads per inch, and equivalent decimal measurements. The tables provide information on machuelo diameters, thread sizes, and drill bit diameters needed to correspond with different machuelo sizes for American/UNC, metric, and NPT thread standards.
Massey ferguson mf 860 combines ( 174619115) parts catalogue manualfhsjejkdmem
This document provides a list of parts for the paddle elevator, shafts and drives, and table to cylinder components for Massey Ferguson MF 860/865 combines. It includes over 100 line items specifying part numbers, quantities, descriptions and additional comments for various components. Reference information is provided at the end for some specific combine models and components.
Massey ferguson mf 865 combines ( 174619115) parts catalogue manualfhsjejkdmem
This document provides a list of parts for the paddle elevator, shafts and drives, and table to cylinder components for Massey Ferguson MF 860/865 combines. It includes over 100 line items specifying part numbers, quantities, descriptions and additional comments for various components. Reference information is provided at the end for some specific combine models and components.
Pipe fitting . in forged fitting manufatuers, supplier, dealer in mumbai ,in...DivyaDarshanMetallic
This document provides specifications for forged high pressure pipe fittings including:
1. Elbows, tees, crosses, couplings, caps, plugs, bushings, unions, and nipples in sizes from 1/8" to 4" made from carbon steel, stainless steel, or alloy steel.
2. Fittings are available with threaded, socket-weld, or butt-welding ends and pressure ratings from 2000 to 9000 pounds.
3. Dimensions, material specifications, markings, finishes and other details are provided according to standards like ASME and ASTM.
The document contains specifications for various platewheel chain configurations including tooth radius, pitch, width, tooth widths, and dimensions for different sizes labeled ASA25A-1 through ASA80-1-2-3. It provides the parameters for platewheels in a table with the measurement values listed according to the platewheel size.
This document provides specifications for various standard H-beam, wide flange, lip channel, and equal angle steel sections. It includes dimensions such as height, width, thickness, area, weight, moments of inertia, radii of gyration, and other geometric properties. Sections range in size from 100x100 mm to 588x300 mm for H-beams, 148x100 mm to 500x200 mm for wide flanges, 100x50x20 mm to 200x75x20 mm for lip channels, and 40x40 mm to 120x120 mm for equal angles. Properties are specified in metric units.
Massey ferguson mf 865 combines ( 174619115) parts catalogue manualfjskekdmmse
This document provides the parts list and descriptions for the paddle elevator, shafts and drives, and table to cylinder components of Massey Ferguson MF 860/865 combines. It contains over 90 line items with part numbers, quantities, descriptions, and additional comments for various parts. Reference information is provided at the end of each section to indicate applicability of certain parts based on combine model or configuration.
Massey ferguson mf 860 combines ( 174619115) parts catalogue manualfjskekdmmse
This document provides the parts list and descriptions for the paddle elevator, shafts and drives, and table to cylinder components of Massey Ferguson MF 860/865 combines. It contains over 90 line items with part numbers, quantities, descriptions, and additional comments for various parts. Reference information is provided at the end of each section to indicate applicability of certain parts to specific combine models and configurations.
Massey ferguson mf 865 combines ( 174619115) parts catalogue manualofpsdjksemmds
This document provides the parts list and descriptions for the paddle elevator, shafts and drives, and table to cylinder components of Massey Ferguson MF 860/865 combines. It contains over 90 line items with part numbers, quantities, descriptions, and additional comments for various parts. Reference information is provided at the end of each section to indicate applicability of certain parts based on combine model or configuration.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.