Auctioneering Control For Temperature Using LabVIEW.Amol Dudhate
Short Presentation about the B.Tech project that i have completed with my partners.
It includes one control loop of temperature control with auctioneering scheme interfaced with arduino and controlled through LabVIEW Programming.
Report of Auctioneering Control For Temperature Using LabVIEW.Amol Dudhate
Report contains overall description about the project Auctioneering Control For Temperature Using LabVIEW.
The required software is LabVIEW and it is interfaced with arduino.
This document outlines the contents of a training course on hot tapping requirements and simulation. The course contains 4 modules: 1) Piping systems, which covers pipes, flanges, fittings, and gaskets; 2) Welding processes, symbols, electrodes, and non-destructive testing; 3) Hot tapping requirements; and 4) Hot tapping simulation. Module 1 provides details on piping materials, sizes, standards, and components. Module 2 describes common welding techniques and introduces welding symbols. Module 3 focuses on hot tapping requirements, while Module 4 involves simulations of hot tapping procedures.
This document provides calculations for determining the Kd value for pressure relief valves according to four different standards: API-520, Dresser (1900), Farris (2600), and Tai-Milano (3000W). The Kd value is calculated by first determining the % back pressure and corresponding Fh value from a graph. Then the Kd table value is multiplied by Fh and 0.9 to find the final Kd.
One of my friend has given a best information regarding DAS (data acquisition system) through this slides/ presentation.
This contains the information about various components of DAS.
Enjoy it,like it.
Auctioneering Control For Temperature Using LabVIEW.Amol Dudhate
Short Presentation about the B.Tech project that i have completed with my partners.
It includes one control loop of temperature control with auctioneering scheme interfaced with arduino and controlled through LabVIEW Programming.
Report of Auctioneering Control For Temperature Using LabVIEW.Amol Dudhate
Report contains overall description about the project Auctioneering Control For Temperature Using LabVIEW.
The required software is LabVIEW and it is interfaced with arduino.
This document outlines the contents of a training course on hot tapping requirements and simulation. The course contains 4 modules: 1) Piping systems, which covers pipes, flanges, fittings, and gaskets; 2) Welding processes, symbols, electrodes, and non-destructive testing; 3) Hot tapping requirements; and 4) Hot tapping simulation. Module 1 provides details on piping materials, sizes, standards, and components. Module 2 describes common welding techniques and introduces welding symbols. Module 3 focuses on hot tapping requirements, while Module 4 involves simulations of hot tapping procedures.
This document provides calculations for determining the Kd value for pressure relief valves according to four different standards: API-520, Dresser (1900), Farris (2600), and Tai-Milano (3000W). The Kd value is calculated by first determining the % back pressure and corresponding Fh value from a graph. Then the Kd table value is multiplied by Fh and 0.9 to find the final Kd.
One of my friend has given a best information regarding DAS (data acquisition system) through this slides/ presentation.
This contains the information about various components of DAS.
Enjoy it,like it.
This document summarizes a presentation on project management. It introduces project management concepts like defining a project, reasons for undertaking projects, and the project management framework. It discusses enterprise project management and the skills of an effective project manager. The project management life cycle and processes from the PMBOK are also summarized, including initiating, planning, executing, monitoring and controlling, and closing processes. The presentation concludes with time for questions.
This document discusses different types of storage tanks used in refineries and chemical plants. It describes atmospheric storage tanks, which operate at approximately atmospheric pressure, including fixed-roof tanks, floating-roof tanks, and fixed-roof tanks with an internal floating roof. Low-temperature and low-pressure storage tanks are also discussed. Standards for storage tank design include API-650 for atmospheric tanks and API-620 for low-pressure tanks. Floating roof tanks are described as minimizing vapor losses by maintaining a small vapor space or eliminating it completely.
The document discusses different types of storage tanks including open top tanks, fixed roof tanks, and floating roof tanks. It provides details on supported cone roof tanks, self-supporting fixed roof tanks, single deck and double deck floating roof tanks, and internal floating roof tanks. Key parts and accessories for floating roof tanks are described such as the roof seal system, support legs, roof drain systems, and vents. Standards for storage tanks like API 650 and 653 are also mentioned.
Piping Components Handbook (Piping Training Material) for Oil & Gas EngineerVarun Patel
Learn in detail every aspect of Pipe & Pipe Fittings used in process industry
•Different types of Pipe, Pipe fittings (Elbow, Tee, reducers, Caps etc.), Flanges, Gaskets, Branch Connection, Bolting materials
•Materials (Metal-Carbon Steel, Stainless Steel, Alloy Steel etc. Non-Metal- PVC/VCM, HDPE, GRE-GRP etc.)
•Manufacturing methods
•Heat treatment requirements
•Inspection and Testing requirements (Non Destructive Testing, Mechanical & Chemical testing)
•Dimensions & Markings requirements
•Code & Standard used in piping
This document provides an overview of early sizing considerations for pressure safety valves (PSVs). It discusses important terminologies, types of PSVs, sizing basis, applicable standards, and the early sizing procedure. The procedure involves selecting possible orifice areas to meet capacity requirements. The objectives of early sizing are to remove holds in piping and instrumentation diagrams and allow early release of piping designs. The document also discusses inter-discipline interfaces, lessons learned, and quality management system documents related to PSV sizing.
This document summarizes a presentation on project management. It introduces project management concepts like defining a project, reasons for undertaking projects, and the project management framework. It discusses enterprise project management and the skills of an effective project manager. The project management life cycle and processes from the PMBOK are also summarized, including initiating, planning, executing, monitoring and controlling, and closing processes. The presentation concludes with time for questions.
This document discusses different types of storage tanks used in refineries and chemical plants. It describes atmospheric storage tanks, which operate at approximately atmospheric pressure, including fixed-roof tanks, floating-roof tanks, and fixed-roof tanks with an internal floating roof. Low-temperature and low-pressure storage tanks are also discussed. Standards for storage tank design include API-650 for atmospheric tanks and API-620 for low-pressure tanks. Floating roof tanks are described as minimizing vapor losses by maintaining a small vapor space or eliminating it completely.
The document discusses different types of storage tanks including open top tanks, fixed roof tanks, and floating roof tanks. It provides details on supported cone roof tanks, self-supporting fixed roof tanks, single deck and double deck floating roof tanks, and internal floating roof tanks. Key parts and accessories for floating roof tanks are described such as the roof seal system, support legs, roof drain systems, and vents. Standards for storage tanks like API 650 and 653 are also mentioned.
Piping Components Handbook (Piping Training Material) for Oil & Gas EngineerVarun Patel
Learn in detail every aspect of Pipe & Pipe Fittings used in process industry
•Different types of Pipe, Pipe fittings (Elbow, Tee, reducers, Caps etc.), Flanges, Gaskets, Branch Connection, Bolting materials
•Materials (Metal-Carbon Steel, Stainless Steel, Alloy Steel etc. Non-Metal- PVC/VCM, HDPE, GRE-GRP etc.)
•Manufacturing methods
•Heat treatment requirements
•Inspection and Testing requirements (Non Destructive Testing, Mechanical & Chemical testing)
•Dimensions & Markings requirements
•Code & Standard used in piping
This document provides an overview of early sizing considerations for pressure safety valves (PSVs). It discusses important terminologies, types of PSVs, sizing basis, applicable standards, and the early sizing procedure. The procedure involves selecting possible orifice areas to meet capacity requirements. The objectives of early sizing are to remove holds in piping and instrumentation diagrams and allow early release of piping designs. The document also discusses inter-discipline interfaces, lessons learned, and quality management system documents related to PSV sizing.