This document is the use and service manual for an FB TR1860 L1/6 coiling machine with serial number 740. The manual contains five parts that provide information on safety, machine installation and operation, software usage, practical guidance on using the coiler, and technical specifications. It outlines rules for safe usage in compliance with European standards and directives. The introduction describes the purpose of the manual and notes it should be accessible to all operators.
Challenges and Opportunities: A Qualitative Study on Tax Compliance in Pakistan
Manual01
1. FB TR1860 L1/6
use and service manual
serial no. 740
F.B. Balzanelli avvolgitori spa w ww.fb-balzanelli.it
20158 milano Via Teglio, 11 Tel. 02.603572 Fax 02.603342 e-mail: marketing@fb-balzanelli.it
61030 Borgaccio di saltara (Pu) Via Buonarroti, 11 Tel. 0721.892168 Fax 0721.879602 e-mail: produzione@fb-balzanelli.it
2. FB TR1860 L1/6
Use and service Manual
Serial No. 740
TR1860 L1/6
Serial No. 740
Client UPONOR A/S
Code FB01061700SA740/mn
Date 10.05
OVERVIEW
As well as using the machine correctly, the operators should carefully read and fully understand this user manual and
strictly follow the instructions it contains. Spending some time reading this manual will allow health and safety risks to people
and financial losses to be avoided.
For the entire life of the machine, the manual should be kept in a location easily accessible to all operators and maintenance
engineers.
Purpose of this manual
This manual is supplied as part of the machine and has been written by the manufacturer to supply all the information
required to those who are authorized to work with the machine.
This manual describes the machine as it was at the time of publication and cannot therefore reflect any information
whatsoever on future or non standard products.
The accuracy of the information given in this manual and its conformity with the equipment described is correct at the time of
printing. However, possible differences may still be present.
F.B. Balzanelli Avvolgitori SpA is fully committed to continuous technological development of its machines and therefore
reserves the right to make changes or improvements to its products at any time.
No part of this manual may be reproduced or transmitted to third parties in any form or by any means, electronic or mechanical
or otherwise, without the prior written permission of F.B. Balzanelli Avvolgitori SpA.
All products or registered marks listed in this manual belong to their respective owners
Manual Layout
Apart from any differences which do not affect the accuracy of the information provided, this manual is divided into four
parts.
The first part, the introduction, contains all general health and safety information.
The second part contains the information on the coiling machine and its components.
The third part of the manual contains the information on the software supplied with the machine.
The last part is a practical guide on how to use the coiling machine.
3. FB TR1860 L1/6
Index
Part I
SAFETy AND gENERAL INFORMATION
Part II
MACHINE INSTALLATION AND FUNCTIONINg
Part III
SOFTWARE USER MANUAL
Part IV
PRACTICAL gUIDE TO THE USE OF THE COILER
Part V
TECHNICAL ATTACHMENT
Use and Service Manual
Serial no. 740 - 10.05
4. FB TR1860 L1/6 Part I
SaFeTy aNd geNeRaL INFoRMaTIoN
1. Rules . . . p. II
2. Machine manufacturer identification . . . p. II
3. Coiler description and use . . . p. III
4. Not allowed uses . . . p. III
5. Dangerous areas . . . p. IV
6. Safety devices. . . p. V
7. Acoustic and luminous indicators . . . p. VII
8. Safety general rules . . . p. VIII
9. Glossary . . . p. X
10. Symbols . . . p. XI
Use and Service Manual
Serial No. 740 - 10.05
5. Part I
Safety and general information
FB TR1860 L1/6 RULeS
1. Rules
The coiler has been conceived and realised in compliance with the standards established by the European harmonised
rules - EN Rules. Thus, it meets the requirements required by the Italian law and the European Directives relating to the
production of machines. In particular:
PublICATIoN ARGuMENT DATE
Regulation 89/392/CE on machine manufacturing 14/06/1989
Regulation 91/368/CE (modified with the 89/392/CE) 20/06/1991
Regulation 93/44/CE (modified with the 89/392/CE) 14/06/1993
Regulation 93/68/CE (modified with the 89/392/CE) 22/07/1993
Regulation 98/37/CE (modified with the 89/392/CE) 22/06/1998
CEI EN 60204-1 • CEI EN 60204-2 Machine safety - Machine Electric equipment
2. MACHINe MANuFACTuReR IDeNTIFICATION
The following identification tag is applied on the electrical control panel of the machine.
logo
Address identification
of the Constructor
Machine Model
Machine number
Manufacture year
Conformity CE symbol
Use and Service Manual
Serial No. 740 - 10.05 2