1. Making Our Pin-Hole Camera Out of Pringles’ tube

2. The Equipments that we used to make our pin-hole camera Half Pringle Tube Black Sugar Paper Tracing Paper Foil Elastic Band Scissors Masking Tape

3. First we had to cut the Pringle tube so there were two pieces, we only used the bottom half.

4. We drew a circle on the black sugar paper so it could fit inside the Pringle tube. After that we placed the circle inside the tube using a bluetac

5. We then next made a hole through the tube using a compass and bluetac– so it was easy to make a hole

6. Then we a 3D circler shape to fit inside the Pringle tube. We did this by using masking tape and the black sugar paper

7. After that process, we then closed the open end with tracing paper and making sure that it was secure by using masking tape

8. We wrapped the whole tube with foil, so it looked better then it used to. We used masking tape to apply the foil.

9. That’s how a pin-hole camera looks like

10. When the process of making our pin-hole Camera was finished. We pointed the side with The hole towards the light, from the other Side with the tracing paper I was able to see The reflection of the bright light in the dark room. This made me feel really happy because I Have never made a pin-hole camera. The making of my pin-hole camera was very Easy because of the simple instructions Given.