A piece of clay is kneaded into a ball and pressed into a mold to take the shape of the mold, excess clay is removed from the top using a slat. Another piece of clay is used to extract the shaped clay from the mold and that piece is removed, leaving the finished clay model which is then put aside.

1. Take a piece of clay and knead it

2. Make a ball

3. Press a ball of clay into the mold

5. Remove excess clay from the top of the mold using slat

6. Using a peace of clay take out a printed clay from the mold

7. Remove a piece of clay used for extracting clay from the mold

8. Finished clay model put aside on the surface