MacDonald_SetDesignConstruction
•
1 like•256 views
This document is an AutoCAD drawing showing the structural design of a main stage. The drawing features labels for the on-stage walkways, T-runways, stage seating areas for the orchestra and news media, and the runway. It was designed by reverse engineering specifications from a photograph provided by the client to depict their conceptual vision for the initial project. The objective was to create technical scaled drawings for building creative stage structures.
Report
Share
Report
Share
Download to read offline
Recommended
Project no.9
1) The document describes the design and analysis of a commercial building using ETABS software, AutoCAD, and manual calculations according to Indian codes and standards.
2) Key aspects of the building include a flat slab design for all floors, an RCC basement and retaining walls, a parking basement, showrooms on the ground floor, and commercial and office space on upper floors.
3) Manual calculations were done to verify the results from ETABS for slabs and to cross-check the software outputs.
Work Portfolio
The document summarizes the career experience of a manufacturing and design engineer, including increasing manufacturing capabilities for automotive parts remanufacturing, designing various vehicle seats, managing product design efforts for trucks, working on interior console and trim designs for multiple vehicle projects, designing exterior fascia and trim components, and recently designing locomotive exterior components.
Spp 201-pre-design services
This document outlines pre-design services including architectural programming, site analysis, feasibility studies, and strategic facility planning. Architectural programming involves systematically evaluating a client's goals and needs through information gathering, data analysis, and identifying space needs. Site analysis assesses the constraints and opportunities of one or more sites, including infrastructure and zoning. Pre-design services provide consultation and analysis to develop a well-conceived design that meets the client's needs and values.
Spp 203-specialized archl services
This document outlines various specialized architectural services provided by UAP including:
- Interior design services such as space planning, layouts, and furniture specifications
- Acoustic design services to control sound transmission
- Lighting design services to control light transmission, timing, and layout
- Site development planning services including landscaping and hardscaping layout
- Comprehensive development planning services synthesizing land use, transportation, socio-cultural factors, and more
- Historic and heritage conservation planning including research, assessment, interpretation and conservation
Prashant_Bachchhav
Prashant Bachchhav's resume summarizes his experience in design engineering and CAD software skills. He has over 2 years of experience in design and development of automotive interior plastic parts using CAD software like Catia V5. Some of his project experiences include working on parts for Tata Nano, Tata SUV, and a door panel for HJD Plast Concept. He is proficient in 3D modeling, surfacing, assembly, drafting and applying GD&T. Bachchhav has a degree in Mechanical Engineering and is certified in Catia V5 and has good knowledge of UG NX.
Freelance Preview
The document describes three freelance jobs for bar detailing and bending schedules for steel reinforcement in concrete structures. The first job was for 24 layout drawings and schedules for a building in Cairo. The second was for 27 drawings and schedules for the reinforcement of extension units. The third job was for 7 drawings minimizing steel weight for a 960m2 slab by achieving a 0.3% reduction in total steel weight.
Spp 202-regular design services
This document outlines the regular design services provided by an architect or architectural firm. It discusses the project definition, schematic design, design development, construction document, bidding and construction phases. It also addresses scope of services, requirements gathering, approvals, deliverables, schedules, manner of providing services, compensation methods, owner responsibilities, and other conditions. The overall purpose is to define the roles and expectations for the architect in delivering quality design and construction documents to meet the client's needs and ensure the welfare of both the architect and owner.
CV AFZAAL AHMAD TARAR 1980 (1)
This curriculum vitae is for Afzaal Ahmad, a senior surveyor based in Saudi Arabia with over 13 years of experience in topographical survey management and land survey management in the Middle East and Singapore. He has extensive experience using tools like total stations, GPS, AutoCAD, and data management software. His background includes roles as a surveyor for engineering companies in Saudi Arabia and the UAE, working on infrastructure projects like roads, sewer systems, and a 850 megawatt hydropower project in Pakistan.
Recommended
Project no.9
1) The document describes the design and analysis of a commercial building using ETABS software, AutoCAD, and manual calculations according to Indian codes and standards.
2) Key aspects of the building include a flat slab design for all floors, an RCC basement and retaining walls, a parking basement, showrooms on the ground floor, and commercial and office space on upper floors.
3) Manual calculations were done to verify the results from ETABS for slabs and to cross-check the software outputs.
Work Portfolio
The document summarizes the career experience of a manufacturing and design engineer, including increasing manufacturing capabilities for automotive parts remanufacturing, designing various vehicle seats, managing product design efforts for trucks, working on interior console and trim designs for multiple vehicle projects, designing exterior fascia and trim components, and recently designing locomotive exterior components.
Spp 201-pre-design services
This document outlines pre-design services including architectural programming, site analysis, feasibility studies, and strategic facility planning. Architectural programming involves systematically evaluating a client's goals and needs through information gathering, data analysis, and identifying space needs. Site analysis assesses the constraints and opportunities of one or more sites, including infrastructure and zoning. Pre-design services provide consultation and analysis to develop a well-conceived design that meets the client's needs and values.
Spp 203-specialized archl services
This document outlines various specialized architectural services provided by UAP including:
- Interior design services such as space planning, layouts, and furniture specifications
- Acoustic design services to control sound transmission
- Lighting design services to control light transmission, timing, and layout
- Site development planning services including landscaping and hardscaping layout
- Comprehensive development planning services synthesizing land use, transportation, socio-cultural factors, and more
- Historic and heritage conservation planning including research, assessment, interpretation and conservation
Prashant_Bachchhav
Prashant Bachchhav's resume summarizes his experience in design engineering and CAD software skills. He has over 2 years of experience in design and development of automotive interior plastic parts using CAD software like Catia V5. Some of his project experiences include working on parts for Tata Nano, Tata SUV, and a door panel for HJD Plast Concept. He is proficient in 3D modeling, surfacing, assembly, drafting and applying GD&T. Bachchhav has a degree in Mechanical Engineering and is certified in Catia V5 and has good knowledge of UG NX.
Freelance Preview
The document describes three freelance jobs for bar detailing and bending schedules for steel reinforcement in concrete structures. The first job was for 24 layout drawings and schedules for a building in Cairo. The second was for 27 drawings and schedules for the reinforcement of extension units. The third job was for 7 drawings minimizing steel weight for a 960m2 slab by achieving a 0.3% reduction in total steel weight.
Spp 202-regular design services
This document outlines the regular design services provided by an architect or architectural firm. It discusses the project definition, schematic design, design development, construction document, bidding and construction phases. It also addresses scope of services, requirements gathering, approvals, deliverables, schedules, manner of providing services, compensation methods, owner responsibilities, and other conditions. The overall purpose is to define the roles and expectations for the architect in delivering quality design and construction documents to meet the client's needs and ensure the welfare of both the architect and owner.
CV AFZAAL AHMAD TARAR 1980 (1)
This curriculum vitae is for Afzaal Ahmad, a senior surveyor based in Saudi Arabia with over 13 years of experience in topographical survey management and land survey management in the Middle East and Singapore. He has extensive experience using tools like total stations, GPS, AutoCAD, and data management software. His background includes roles as a surveyor for engineering companies in Saudi Arabia and the UAE, working on infrastructure projects like roads, sewer systems, and a 850 megawatt hydropower project in Pakistan.
Linked In 1
Edward Hart Jr. is a product design engineer who has designed and constructed various products for companies such as Intellitronic Devices, Goodrich Corporation, Pyrotronic Devices, C-Tech Associates, and United Theatrical Services. Some of his projects include an SMT rework and exploration kit, an Airbus 380 refueling tanker conversion, an LED chaser, breadboarding tools, winches of various sizes, a visual fault locator, turntable control systems, scissor lifts, a scenery rotator, an optical power meter, tradeshow preparations, and a 20-foot turntable.
T03 river crossing-misterly
This document discusses a large construction project to install a new water pipeline using horizontal directional drilling. The project involves drilling a 6,572 foot long, 36-inch diameter pipeline 100 feet below the St. Johns River in Jacksonville, Florida on an aggressive schedule. The owner, JEA, chose to use a design-build approach to take advantage of the contractor's early involvement and ensure schedule and cost certainty. Key challenges included navigating two curves in the drill path below the river and coordinating pipe assembly along a busy roadway.
Mechanical Portfolio & Statement -PARTIAL - 2016
This resume summarizes Glenwood Johnson Jr.'s engineering technology education and experience. He has an Associate of Science degree in Engineering Technology from American River College completed in 2014. His experience includes positions in AutoCAD drafting, Revit modeling, product support, sales engineering, and the U.S. Navy. He is seeking further career growth in areas like project management, sales engineering, and technical consulting. Samples of his work in AutoCAD, Revit, SketchUp, and Navisworks modeling and BIM collaboration are included.
BN Venkateshwar Rao-Resume
This document provides a summary of B.N. Venkateshwar Rao's professional experience and qualifications. It outlines his 13+ years of experience as a Senior Design Engineer, including roles designing parts for various rail and industrial projects. It also lists his educational background of an ME in Mechanical Engineering and BE in Mechanical Engineering. Key software skills include CATIA V5, AutoCAD, Autodesk Inventor, and SolidWorks. A selection of technical project experience is then described involving roles in 3D modeling, drawing creation, coordination, and project management.
2117nw
This summary provides an overview of Michael Wechter's career experience in mechanical and electro-mechanical CAD design spanning from 1989 to present. He has over 30 years of experience creating detailed 2D and 3D drawings using various CAD software programs including AutoCAD, SolidWorks, ProE/Creo, and Solid Edge. His background includes contract design work for various industries like HVAC, medical devices, and industrial machinery.
Portfolio for Revitus: Revit Content Developers
Revitus is an independent consulting firm specializing in developing 3D Revit content libraries for Building Product Manufacturers. Architects and designers use this Revit content in their Building Information Models while designing projects.
Ibrahim Naeem BIM Projects Portfolio
The document discusses the PipeFab plugin for Revit, which automates pipe fabrication and drafting. It reduces production of installation drawings by 60%. The plugin lists pipes, exports data to Excel, and generates CNC files. It provides direction labels and exports cutting sheets to Excel for easier review. The document also discusses several other BIM projects for facilities in Saudi Arabia.
Josh Newmaster - Resume
Josh Newmaster is a senior structural designer with over 15 years of experience in structural steel and reinforced concrete design. He has expertise in 3D modeling, drawing extractions, and design drawing preparation using various CAD software. He aims to produce high quality design work under budget and ahead of schedule for clients. Newmaster has worked on projects in industries such as hydrocarbons, petrochemicals, modular design, and arctic design.
More Related Content
Similar to MacDonald_SetDesignConstruction
Linked In 1
Edward Hart Jr. is a product design engineer who has designed and constructed various products for companies such as Intellitronic Devices, Goodrich Corporation, Pyrotronic Devices, C-Tech Associates, and United Theatrical Services. Some of his projects include an SMT rework and exploration kit, an Airbus 380 refueling tanker conversion, an LED chaser, breadboarding tools, winches of various sizes, a visual fault locator, turntable control systems, scissor lifts, a scenery rotator, an optical power meter, tradeshow preparations, and a 20-foot turntable.
T03 river crossing-misterly
This document discusses a large construction project to install a new water pipeline using horizontal directional drilling. The project involves drilling a 6,572 foot long, 36-inch diameter pipeline 100 feet below the St. Johns River in Jacksonville, Florida on an aggressive schedule. The owner, JEA, chose to use a design-build approach to take advantage of the contractor's early involvement and ensure schedule and cost certainty. Key challenges included navigating two curves in the drill path below the river and coordinating pipe assembly along a busy roadway.
Mechanical Portfolio & Statement -PARTIAL - 2016
This resume summarizes Glenwood Johnson Jr.'s engineering technology education and experience. He has an Associate of Science degree in Engineering Technology from American River College completed in 2014. His experience includes positions in AutoCAD drafting, Revit modeling, product support, sales engineering, and the U.S. Navy. He is seeking further career growth in areas like project management, sales engineering, and technical consulting. Samples of his work in AutoCAD, Revit, SketchUp, and Navisworks modeling and BIM collaboration are included.
BN Venkateshwar Rao-Resume
This document provides a summary of B.N. Venkateshwar Rao's professional experience and qualifications. It outlines his 13+ years of experience as a Senior Design Engineer, including roles designing parts for various rail and industrial projects. It also lists his educational background of an ME in Mechanical Engineering and BE in Mechanical Engineering. Key software skills include CATIA V5, AutoCAD, Autodesk Inventor, and SolidWorks. A selection of technical project experience is then described involving roles in 3D modeling, drawing creation, coordination, and project management.
2117nw
This summary provides an overview of Michael Wechter's career experience in mechanical and electro-mechanical CAD design spanning from 1989 to present. He has over 30 years of experience creating detailed 2D and 3D drawings using various CAD software programs including AutoCAD, SolidWorks, ProE/Creo, and Solid Edge. His background includes contract design work for various industries like HVAC, medical devices, and industrial machinery.
Portfolio for Revitus: Revit Content Developers
Revitus is an independent consulting firm specializing in developing 3D Revit content libraries for Building Product Manufacturers. Architects and designers use this Revit content in their Building Information Models while designing projects.
Ibrahim Naeem BIM Projects Portfolio
The document discusses the PipeFab plugin for Revit, which automates pipe fabrication and drafting. It reduces production of installation drawings by 60%. The plugin lists pipes, exports data to Excel, and generates CNC files. It provides direction labels and exports cutting sheets to Excel for easier review. The document also discusses several other BIM projects for facilities in Saudi Arabia.
Josh Newmaster - Resume
Josh Newmaster is a senior structural designer with over 15 years of experience in structural steel and reinforced concrete design. He has expertise in 3D modeling, drawing extractions, and design drawing preparation using various CAD software. He aims to produce high quality design work under budget and ahead of schedule for clients. Newmaster has worked on projects in industries such as hydrocarbons, petrochemicals, modular design, and arctic design.
Similar to MacDonald_SetDesignConstruction (8)
MacDonald_SetDesignConstruction
- 1. UpstageCross Over Downstage On-Stage Walkway On-Stage Walkway R unw ay T - R unw ay Stage Seating: Orchestra or News Media T - R unw ay W alk-R ing H o use A udie nce Stage Seating: Orchestra or News Media G design byAuto CAD Robert MacDonald G Graphics Delivered GraphicsDelivered@gmail.com 610-547-6577 G > > > > Project# File American Music Theatres Project Client Graphics Delivered - California Soul main stage structure (2-D isometric).aiB-PYW-AMT American Music Theatre Stage Structure Design G > >> Project# B-PYW-AMT Image This image is an Auto CAD scaled drawing that features the structural concept detail of the Main Stage Structure. The drawing was designed and created by reverse engineering specifications based on examining a photograph supplied by the client as a conceptual example of what they envisioned their initial project to be. Reverse engineer specifications from a photograph to create technical scaled drawing designs for building creative structures. Objective Project Description Isometric Scale: 120*
- 2. Carpentry G by Robert MacDonald Design & Build G > > > Project# File Springfield Players Theatre Group Project Client MacDonald_CAD_Design&Construction.aiA-jaw-7725 Carpentry for Plazza Suite Traveling Theatre Production Set