This document provides installation instructions for S-5! snow retention systems, including Snorail and Snofence. It outlines 6 key steps: 1) establishing a string line and determining appropriate clamp locations, 2) preparing clamp assemblies by threading clamps and posts onto rods, 3) installing clamp assemblies loosely on panel seams, 4) tightening all set screws, 5) securing rods at "E" units, and 6) repeating for additional rods using couplings. Proper set screw tension is emphasized for maximum holding strength. The systems can be installed on various roofing materials, including adjusting installation for batten seams.
This document provides installation instructions for ColorGard®, a product for attaching items like snow guards to standing seam metal roofs without piercing the panels. The instructions outline how to properly design and layout the ColorGard® system, prepare the necessary tools and S-5! clamps, and install the ColorGard® crossmembers and color strips. Key steps include using a string line for accurate clamp placement, orienting clamp bolt holes and setscrews correctly, attaching VersaClips as needed, and securing color strips to the crossmembers.
This document provides installation instructions for S-5! snow retention systems, including Snorail and Snofence. It outlines 6 key steps: 1) establishing a string line and determining appropriate clamp locations, 2) preparing clamp assemblies by threading clamps and posts onto rods, 3) installing clamp assemblies loosely on panel seams, 4) tightening all set screws, 5) securing rods at "E" units, and 6) repeating for additional rods using couplings. Proper set screw tension is emphasized for maximum holding strength. The systems can be installed on various roofing materials, including adjusting installation for batten seams.
This document provides installation instructions for ColorGard®, a product for attaching items like snow guards to standing seam metal roofs without piercing the panels. The instructions outline how to properly design and layout the ColorGard® system, prepare the necessary tools and S-5! clamps, and install the ColorGard® crossmembers and color strips. Key steps include using a string line for accurate clamp placement, orienting clamp bolt holes and setscrews correctly, attaching VersaClips as needed, and securing color strips to the crossmembers.
ColorGard is an aluminum roof attachment system manufactured in 8-foot sections for use with S-5 clamps. It comes in punched or unpunched configurations, with punched having slots every 4 inches and unpunched being more versatile to install. Splices are included to join sections together. Accessories like VersaClips and SnoClips are also available to aid installation.
This document provides installation instructions for a universal standing seam panel roof curb in 6 steps:
1) Attach sub-frames to support the roof curb. 2) Mark and cut the roof panel to size. 3) Install backup channels under the roof panel. 4) Apply sealants and set the curb in place. 5) Fasten the curb to the roof panel. 6) Attach cap strips around the roof curb installation.
This document provides instructions for installing a trapezoidal standing seam roof curb. The instructions include:
1) Attaching sub-frames to support the curb opening and layout the curb on the roof panel.
2) Cutting the roof panel to size and installing backup channels below the panel.
3) Applying sealants to the curb and panel before setting the curb in place.
4) Fastening the curb to the roof panel with self-tapping screws.
5) Attaching cap strips around the curb opening using sealants and screws.
This document provides instructions for installing R-panel roof curbs. The instructions are as follows:
1. Attach sub-frames to the roof purlins using bolts, washers and nuts.
2. Layout the curb locations and mark the throat area cut lines on the roof panel.
3. Center the back-up channels with the roof openings and slide them underneath the roof panels.
The instructions provide diagrams and details for properly installing and securing the roof curbs.
Over the course of thirty plus years in the metal building industry, LMCURBS has experienced tremendous growth by staying committed to offering products and services targeted specifically for customers who require innovative solutions delivered with the highest quality possible in order to fulfill the most challenging aspects of metal roofing applications. We recognize two essential requirements in our continued effort to meet customers’ expectations: our people and our products. This commitment is achieved through our team that has been carefully assembled over the last thirty plus years with each member representing the highest level of expertise in their respective skill. Our workmanship, pride, and reputation are evident in each completed product and project.
In the follow pages, we describe the key features and options available for all of our product lines. These product lines, to name a few, include roof curbs, snow retention, roof walk, louvers, exhaust fans, and much more. With this wide selection of products, we have effectively worked to create an unparalleled buying experience that allows customers to purchase metal roofing accessories from a single source supplier. We value this opportunity to present our company's capabilities and look forward to working with you on your next project.
Over the course of thirty plus years in the metal building industry, LMCURBS has experienced tremendous growth by staying committed to offering products and services targeted specifically for customers who require innovative solutions delivered with the highest quality possible in order to fulfill the most challenging aspects of metal roofing applications. We recognize two essential requirements in our continued effort to meet customers’ expectations: our people and our products. This commitment is achieved through our team that has been
carefully assembled over the last thirty plus years with each member representing the highest level of expertise
in their respective skill. Our workmanship, pride, and reputation are evident in each completed product and
project.
In the follow pages, we describe the key features and options available for all of our product lines. These product
lines, to name a few, include roof curbs, snow retention, roof walk, louvers, exhaust fans, and much more. With
this wide selection of products, we have effectively worked to create an unparalleled buying experience that
allows customers to purchase metal roofing accessories from a single source supplier. We value this opportunity
to present our company's capabilities and look forward to working with you on your next project.
This document provides installation instructions for installing a horizontal standing seam roof curb. The instructions are as follows:
1. Attach sub-frames to support the roof curb opening.
2. Mark and cut the roof panel to size for the curb opening.
3. Slide backup channels under the roof panel.
4. Apply sealants around the curb perimeter and set the curb in place over the opening.
5. Fasten the curb to the roof panel using self-tapping screws.
This document provides installation instructions for vertical standing seam roof curbs in 3 steps:
1. Attach sub-frames and layout the curb on the roof panel, cutting the panel as needed.
2. Apply sealants, set the curb in place, and fasten it to the roof panel.
3. Attach cap strips to cover the seam between the curb and roof panel.
Building a Raspberry Pi Robot with Dot NET 8, Blazor and SignalRPeter Gallagher
In this session delivered at NDC Oslo 2024, I talk about how you can control a 3D printed Robot Arm with a Raspberry Pi, .NET 8, Blazor and SignalR.
I also show how you can use a Unity app on an Meta Quest 3 to control the arm VR too.
You can find the GitHub repo and workshop instructions here;
https://bit.ly/dotnetrobotgithub
ColorGard is an aluminum roof attachment system manufactured in 8-foot sections for use with S-5 clamps. It comes in punched or unpunched configurations, with punched having slots every 4 inches and unpunched being more versatile to install. Splices are included to join sections together. Accessories like VersaClips and SnoClips are also available to aid installation.
This document provides installation instructions for a universal standing seam panel roof curb in 6 steps:
1) Attach sub-frames to support the roof curb. 2) Mark and cut the roof panel to size. 3) Install backup channels under the roof panel. 4) Apply sealants and set the curb in place. 5) Fasten the curb to the roof panel. 6) Attach cap strips around the roof curb installation.
This document provides instructions for installing a trapezoidal standing seam roof curb. The instructions include:
1) Attaching sub-frames to support the curb opening and layout the curb on the roof panel.
2) Cutting the roof panel to size and installing backup channels below the panel.
3) Applying sealants to the curb and panel before setting the curb in place.
4) Fastening the curb to the roof panel with self-tapping screws.
5) Attaching cap strips around the curb opening using sealants and screws.
This document provides instructions for installing R-panel roof curbs. The instructions are as follows:
1. Attach sub-frames to the roof purlins using bolts, washers and nuts.
2. Layout the curb locations and mark the throat area cut lines on the roof panel.
3. Center the back-up channels with the roof openings and slide them underneath the roof panels.
The instructions provide diagrams and details for properly installing and securing the roof curbs.
Over the course of thirty plus years in the metal building industry, LMCURBS has experienced tremendous growth by staying committed to offering products and services targeted specifically for customers who require innovative solutions delivered with the highest quality possible in order to fulfill the most challenging aspects of metal roofing applications. We recognize two essential requirements in our continued effort to meet customers’ expectations: our people and our products. This commitment is achieved through our team that has been carefully assembled over the last thirty plus years with each member representing the highest level of expertise in their respective skill. Our workmanship, pride, and reputation are evident in each completed product and project.
In the follow pages, we describe the key features and options available for all of our product lines. These product lines, to name a few, include roof curbs, snow retention, roof walk, louvers, exhaust fans, and much more. With this wide selection of products, we have effectively worked to create an unparalleled buying experience that allows customers to purchase metal roofing accessories from a single source supplier. We value this opportunity to present our company's capabilities and look forward to working with you on your next project.
Over the course of thirty plus years in the metal building industry, LMCURBS has experienced tremendous growth by staying committed to offering products and services targeted specifically for customers who require innovative solutions delivered with the highest quality possible in order to fulfill the most challenging aspects of metal roofing applications. We recognize two essential requirements in our continued effort to meet customers’ expectations: our people and our products. This commitment is achieved through our team that has been
carefully assembled over the last thirty plus years with each member representing the highest level of expertise
in their respective skill. Our workmanship, pride, and reputation are evident in each completed product and
project.
In the follow pages, we describe the key features and options available for all of our product lines. These product
lines, to name a few, include roof curbs, snow retention, roof walk, louvers, exhaust fans, and much more. With
this wide selection of products, we have effectively worked to create an unparalleled buying experience that
allows customers to purchase metal roofing accessories from a single source supplier. We value this opportunity
to present our company's capabilities and look forward to working with you on your next project.
This document provides installation instructions for installing a horizontal standing seam roof curb. The instructions are as follows:
1. Attach sub-frames to support the roof curb opening.
2. Mark and cut the roof panel to size for the curb opening.
3. Slide backup channels under the roof panel.
4. Apply sealants around the curb perimeter and set the curb in place over the opening.
5. Fasten the curb to the roof panel using self-tapping screws.
This document provides installation instructions for vertical standing seam roof curbs in 3 steps:
1. Attach sub-frames and layout the curb on the roof panel, cutting the panel as needed.
2. Apply sealants, set the curb in place, and fasten it to the roof panel.
3. Attach cap strips to cover the seam between the curb and roof panel.
Building a Raspberry Pi Robot with Dot NET 8, Blazor and SignalRPeter Gallagher
In this session delivered at NDC Oslo 2024, I talk about how you can control a 3D printed Robot Arm with a Raspberry Pi, .NET 8, Blazor and SignalR.
I also show how you can use a Unity app on an Meta Quest 3 to control the arm VR too.
You can find the GitHub repo and workshop instructions here;
https://bit.ly/dotnetrobotgithub