1. LIST OF PUBLICATIONS
1) Suresh P M, Chandru B T “Finite Element and Experimental Modal Analysis of car roof with
and without Damper” 23-25 September 2016, AMMMT 2016, which will be published in
Science Direct Materials Today proceedings 2017
2) Suresh P M, Abhishek M R Sreedhar Murthy H S “Evaluation of Mechanical properties of
Jute/E-Glass Epoxy hybrid composites by varying fibre loading with and without shear
thickening fluid” 23-25 September 2016, AMMMT 2016, which will be published in Science
Direct Materials Today proceedings 2017
3) Suresh P M, Abhishek S “Root Cause Analysis Of Forged Spline Yoke Shaft Using Finite
Element Method” Abstract is accepted for International conference IMMMC at VIT
Vellore
4) Suresh P M, Suman Bhargav, Venkat Swamy K S “Design of a lighter tube structure for
improved crash worthiness parameters during quasi ststic axial compression by foam filling”
Communicated to Journal of Engineering Science & Technology (JESTEC)
5) Suresh P M, Suman Bhargav, Anil Kumar, Murulidhar K S “ Fabrication of fixture for
concentric foam filling of tubes” Emerging Trends in Mechanical Engineering and
Technology, ETMET 2016, International Journal Of Engineering Research & Technology
(IJERT) ISSN 2278-7844/#36, Vol 5, Issue 6, June 2016, pp 36-40.
6) Suresh P M, Chandru B T , Neelappagowda Jagali, Maruthi B H “ Evaluation Of Natural
Frequency of Car Door With and Without Damper Using Experimental Method and Validate
Using Numerical Method” International Journal Of Advance and Innovative Research
(IJAIR) ISSN 2278-7844/#36, Vol 5, Issue 6, June 2016, pp 36-40.
7) Suresh P M, Abhishek M R “Composite Materials in Automotive Bumper Reinforcement: A
Review” 5th
National Conference on “Emerging Trends in Engineering Technologies” ETET
2016, 11-12th
March 2016, Jyothy Institute of Technology, Bangalore
8) Suresh P M, Sudha P N, Prathima B A “Proposed algorithm for auto error correction and
detection for closed loop manufacturing using embedded system” International Journal Of
Current Research (IJCR) ISSN 0975-833X, Vol 7, Issue 09, Sept 2015, pp 20519-20523
9) Suresh P M, Suman Bhargav, Venkat Swamy K S “Comparative Study Of The Energy
2. Absorption Capacities Of Xps And Xpe Foam Filled Aluminium Square Tubes Under Quasi-
Static Axial Compression” International Journal Of Engineering Research (IJER) ISSN
2319-6890 Issue 7, Vol. 4, July 2015, pp368-372
10) Suresh P M, Sunil “Experimental Modal Analysis of Automotive exhaust muffler using FEM
and FFT analyzer” International Journal of Recent Development in Engineering and
Technology (IJRDET) ISSN 2347-6435, Vol. 3, Issue 1, July 2014, pp185-189
11) Suresh P M, Anil Kumar C, Berkath Ali Khan “Tribological Behaviour of Plasma sprayed
Al203-TiO2 coating on Al-6082T6 Substrate” International Journal of Innovative Research
in Science, Engineering and Technology (IJIRSET) ISSN 2319-8753, Vol. 3, Issue 6, June
2014, pp13956-13963
12) Suresh P M, Gayathri S “Static and bolt load analysis of a two stage air compressor
connecting rod” International Journal of Innovative Research in Aeronautical and
Mechanical Engineering (IJRAME), Vol. 2, Issue 2, February 2014, pp11-22
13) Suresh P M, Manjunath T V “Structural and thermal analysis of rotor disc of disc brake”
International Journal of Innovative Research in Science, Engineering and Technology
(IJIRSET) ISSN 2319-8753, Vol. 2, Issue 12, December 2013, pp7741-7749
14) Suresh P M, Naveena M “Lateral critical speed analysis of multi stage centrifugal pump rotor
using FEA” International Journal of Innovative Research in Science, Engineering and
Technology (IJIRSET) ISSN 2319-8753, Vol. 2, Issue 8, August 2013, pp3914-3920.
15) Suresh P M, Wani Trupti “Design and analysis of A-Frame for Roller Hemming Cell”
International Journal of Applied Research and Studies (IJARS) ISSN 2278-9480, Vol II,
Issue 2, Feb 2013/331.
16) Suresh P M etal, “Noise Vibration and Harshness Analysis of Engine Oil Pan” DOCAM
2012, May 2012, May 18-19 2012 at EWIT, Bangalore.
17) Suresh P M etal, “Experimental Investigation of Mechanism Affecting the Door Closing
Sound of a passenger Car” DOCAM 2012, May 18-19 2012 at EWIT, Bangalore.
18) Suresh P M etal, “Vibration analysis of an Engine Hood” DOCAM 2012, May18-19 2012 at
EWIT, Bangalore.
19) Suresh P M, Vinay kumar Sheelin, “Non Airbag energy absorbent system” DOCAM 2012,
3. May18-19 2012 at EWIT, Bangalore.
20) Suresh P M, Anand Kumar, “Magneto rheological fluids for vibration control” DOCAM
2012, May18-19 2012 at EWIT, Bangalore.
21) Suresh P M, Shruthi A S, Somashekar K “Design of cabin structure of a training simulator”
DOCAM 2012, May18-19 2012 at EWIT, Bangalore.
22) Suresh P M, C S Venkatesha “Modal analysis of conventional and sandwich constructed
passenger car Hood” IEC2011 (Institution of Engineers (India)), 15-18, Dec 2011 at
Palace grounds, Bangalore.
23) Suresh P M, C S Venkatesha, Guruprasad N C, Basavaraj Noolvi, “Modal Analysis of
Conventional and Sandwich Constructed Passenger Car Roof” International Journal of
Applied Engineering Research, ISSN 0973-4562, Vol6, N0. 5, 2011, Research India
Publications.
24) Suresh P M, C S Venkatesha, Guruprasad N C, Basavaraj Noolvi, “Modal Analysis of
Conventional and Sandwich Constructed Passenger Car Roof” NaConDM2010, 27-28 May
2011 at IIITDM, Chennai.
25) Suresh P M, C S Venkatesha “Modal analysis of conventional and sandwich constructed
passenger car door” International Conference on Convergence of Science and
Engineering (ICSE) in education and research 21-23, April 2010 at Dayanand Sagar
College of Engineering, Bangalore
26) Suresh P M, C S Venkatesha “Comparison of NVH characteristics of sandwich constructed
and conventional floor of passenger car” Proceedings of 2nd
International Conference on
Recent Advances in Material Processing Technology, 25-27, Feb 2009, NIE, Kovilapatti,
TN, pp 311-317.
27) Suresh P M, C S Venkatesha “Modal analysis of a passenger car door” Proceedings of
National level conference on Advances in Mechanical Engineering, 30-31 Mar 2009,
DBIT Bangalore pp 214-219.
28) Suresh P M, A R K Swamy “Characteristic behaviour of non linear vibration system”
Proceedings of National level conference on Advances in Mechanical Engineering, 30-31
Mar 2009, DBIT Bangalore, pp 220-225.
4. 29) Suresh P M, C S Venkatesha “NVH reduction using sandwich constructed components of
passenger car” Proceedings of National level conference on Emerging Trends in
Mechanical Engineering, 28-29 Aug 2008, BMSCE Bangalore, pp 60.
30) Suresh P M, C S Venkatesha “Reduction of NVH using sandwich constructed components of
passenger car” Proceedings of National level Technical seminar in Mechanical
Engineering, 03, May 2008, MSRIT Bangalore.
31) Suresh P M, C S Venkatesha “Vibro-Acoustic Analysis of Mounting Table of a Launch
Vehicle” Proceedings of National level conference on Advances in Materials and
Manufacturing Processes, 5-6, Oct 2007, University B D T College of Engineering,
Davanagere, pp 520-525.