The document provides specifications for 6 diesel engine models: V3800-CR-TE4, V3800-CR-TE4C, V3800-CR-TIE4, V3800-CR-TIE4C, V3800-TIE4, and V3800-TIE4C. The specifications include information such as the number of cylinders, displacement, power output, fuel and oil recommendations, lubrication system, cooling system, and dimensions. The purpose is to outline the standard specifications and features of each engine model.
This Workshop Manual has been prepared to provide servicing personnel with
information on the mechanism, service and maintenance of M8540 and M9540. It is
divided into three parts, “General”, “Mechanism” and “Servicing”.
This Workshop Manual has been prepared to provide servicing personnel with
information on the mechanism, service and maintenance of M8540 and M9540. It is
divided into three parts, “General”, “Mechanism” and “Servicing”.
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
Core technology of Hyundai Motor Group's EV platform 'E-GMP'Hyundai Motor Group
What’s the force behind Hyundai Motor Group's EV performance and quality?
Maximized driving performance and quick charging time through high-density battery pack and fast charging technology and applicable to various vehicle types!
Discover more about Hyundai Motor Group’s EV platform ‘E-GMP’!
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
3. Record of Revisions
For pdf, use search function {Search word} to find the all revised locations.
Last digit
of the
Code No.
Issue
month
Main Revised Point and Corrective Measures {Search word}
Reference
Page
1 2013.03 • Correction of Workshop Manual
The provisional WSM that has already been issued was corrected
and the regular WSM was revised.
{1. ENGINE IDENTIFICATION}
{2. MUFFLER FULL ASSEMBLY IDENTIFICATION}
{[7] EVERY 1500 HOURS}
{[8] EVERY 3000 HOURS}
{[9] EVERY 1 YEAR}
and others
G-1,
G-4,
G-20,
G-22,
G-27
and others
2 2013.07 • Correction of Workshop Manual
3. PERFORMANCE CURVES
2. MUFFLER FULL ASSEMBLY IDENTIFICATION
Judgment of Reuse of Filter Comp (DPF) Before Cleaning (Service
Dealer)
Change of Radiator Coolant (L.L.C.)
Flywheel Stopper
Compression Tester Adaptor
Rotation Sensor Signal Interface Unit
[3] RAIL
Function of Diesel Particulate Filter (DPF)
[2] TIGHTENING TORQUES OF SCREWS, BOLTS AND NUTS
FOR SPECIAL USE
Compression Pressure
Muffler Full Assembly (DPF)
EGR Pipe, Turbocharger and EGR Cooler
Common Rail and Injection Pipes
Cylinder Head and Tappet
Top clearance
Replacement of Valve Guide
I-7, I-8
G-4
G-25
G-30
G-37
G-39
G-41
1-M13
1-M33
1-S13
1-S15
1-S27
1-S32
1-S33
1-S42
1-S72
1-S74
3 2015.12 • Added the information of V3800-TIE4, V3800-TIE4C (DOC only) –
4 2016.10 • Correction of Workshop Manual
The information of V3800-TIE4, V3800-TIE4C (DOC only)
–
5 2017.04 • Correction of Workshop Manual
The procedure of removing and installing for following parts.
1. SCV
2. Fuel Temperature Sensor
• Correction of Biodiesel fuel information
1-S45
1-S47
KiSC issued 04, 2017 A
5. CONTENTS
1. SAFETY FIRST .............................................................................................................................. I-1
2. SPECIFICATIONS.......................................................................................................................... I-5
3. PERFORMANCE CURVES............................................................................................................ I-7
4. DIMENSIONS............................................................................................................................... I-10
5. WIRING DIAGRAM....................................................................................................................... I-12
[1] ENGINE INTERMEDIATE HARNESS (ENGINE SIDE HARNESS)....................................... I-12
[2] INJECTOR INTERMEDIATE HARNESS
(ENGINE SIDE HARNESS).................................................................................................... I-14
[3] ECU INTERMEDIATE HARNESS (OEM SIDE HARNESS)................................................... I-15
[4] SYSTEM WIRING DIAGRAM................................................................................................. I-20
INFORMATION
KiSC issued 04, 2017 A
6. INFORMATIONV3800-CR-TE4(C), V3800-CR-TIE4(C), V3800-TIE4(C) (DOC only), WSM
I-1
1. SAFETY FIRST
WSM000001INI0001US1
BEFORE YOU START SERVICE
• Read all instructions and safety instructions in this
manual and on your engine safety decals.
• Clean the work area and engine.
• Park the machine on a stable and level ground.
• Let the temperature of the engine decrease before
you start a job.
• Stop the engine, then remove the key.
• Disconnect the battery negative cable.
• Hang a "DO NOT OPERATE" tag in the operator
station.
WSM000001INI0002US0
START SAFELY
• Do not do the procedures below when you start the
engine.
– short across starter terminals
– bypass the safety start switch
• Do not make unauthorized modifications to the
engine. This can cause damage and decrease the
engine life.
WSM000001INI0003US0
SAFETY FIRST
• This symbol, the industry's "Safety Alert Symbol", is used throughout this manual and on labels on the
machine itself to warn of the possibility of personal injury. Read these instructions carefully.
• It is essential that you read the instructions and safety regulations before you try to repair or use this
unit.
DANGER
• Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING
• Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
• Indicates a potentially hazardous situation which, if not avoided, could result in minor or moderate
injury.
IMPORTANT
• Indicates that equipment or property damage could result if instructions are not followed.
NOTE
• Gives helpful information.
KiSC issued 04, 2017 A
7. INFORMATIONV3800-CR-TE4(C), V3800-CR-TIE4(C), V3800-TIE4(C) (DOC only), WSM
I-2
OPERATE SAFELY
• Do not use the machine after you consume alcohol
or medication or when you are tired.
• Put on applicable clothing and safety equipment.
• Use applicable tools only. Do not use alternative
tools or parts.
• When 2 or more persons do servicing, make sure
that you do it safely.
• Do not touch the hot parts or parts that turn when the
engine operates.
• Do not remove the radiator cap when the engine
operates, or immediately after it stops. If not, hot
water can spout out from the radiator. Only remove
the radiator cap when it is at a sufficiently low
temperature to touch with bare hands. Slowly loosen
the cap to release the pressure before you remove it
fully.
• Released fluid (fuel or hydraulic oil) under pressure
can cause damage to the skin and cause serious
injury. Release the pressure before you disconnect
hydraulic or fuel lines. Tighten all connections before
you apply the pressure.
• Do not open a fuel system under high pressure.
The fluid under high pressure that stays in fuel lines
can cause serious injury. Do not disconnect or repair
the fuel lines, sensors, or any other components
between the fuel pump and injectors on engines with
a common rail fuel system under high pressure.
• Put on an applicable ear protective device (earmuffs
or earplugs) to prevent injury against loud noises.
• Be careful about electric shock. The engine
generates a high voltage of more than DC100 V in
the ECU and is applied to the injector.
WSM000001INI0004US0
PROTECT AGAINST HIGH PRESSURE SPRAY
• Spray from high pressure nozzles can penetrate the
skin and cause serious injury. Keep spray from
contacting hands or body.
• If an accident occurs, see a doctor immediately. Any
high pressure spray injected into the skin must be
surgically removed within a few hours or gangrene
may result.
Doctors unfamiliar with this type of injury should
reference a knowledgeable medical source.
9Y1210651INI0014US0
KiSC issued 04, 2017 A
8. INFORMATIONV3800-CR-TE4(C), V3800-CR-TIE4(C), V3800-TIE4(C) (DOC only), WSM
I-3
AVOID HOT EXHAUST
• Servicing machine or attachments with engine
operating can result in serious personal injury. Avoid
exposure and skin contact with hot exhaust gases
and components.
• Exhaust parts and streams become very hot during
operation. Exhaust gases and components reach
temperatures hot enough to burn people, ignite, or
melt common materials.
9Y1210651INI0015US0
EXHAUST FILTER CLEANING
• Servicing machine or attachments during exhaust
filter cleaning can result in serious personal injury.
Avoid exposure and skin contact with hot exhaust
gases and components.
• During auto or manual/stationary exhaust filter
cleaning operations, the engine will operate at
elevated idle and hot temperatures for an extended
period of time. Exhaust gases and exhaust filter
components reach temperatures hot enough to burn
people, or ignite, or melt common materials.
9Y1210651INI0016US0
PREVENT A FIRE
• Fuel is very flammable and explosive under some
conditions. Do not smoke or let flames or sparks in
your work area.
• To prevent sparks from an accidental short circuit,
always disconnect the battery negative cable first
and connect it last.
• The battery gas can cause an explosion. Keep the
sparks and open flame away from the top of battery,
especially when you charge the battery.
• Make sure that you do not spill fuel on the engine.
WSM000001INI0005US0
KEEP A GOOD AIRFLOW IN THE WORK AREA
• If the engine is in operation, make sure that the area
has good airflow. Do not operate the engine in a
closed area. The exhaust gas contains poisonous
carbon monoxide.
WSM000001INI0006US0
KiSC issued 04, 2017 A
9. INFORMATIONV3800-CR-TE4(C), V3800-CR-TIE4(C), V3800-TIE4(C) (DOC only), WSM
I-4
DISCARD FLUIDS CORRECTLY
• Do not discard fluids on the ground, down the drain,
into a stream, pond, or lake. Obey related
environmental protection regulations when you
discard oil, fuel, coolant, electrolyte and other
dangerous waste.
WSM000001INI0007US0
PREVENT ACID BURNS
• Keep electrolyte away from your eyes, hands and
clothing. Sulfuric acid in battery electrolyte is
poisonous and it can burn your skin and clothing and
cause blindness. If you spill electrolyte on yourself,
clean yourself with water, and get medical aid
immediately.
WSM000001INI0008US0
PREPARE FOR EMERGENCIES
• Keep a first aid kit and fire extinguisher ready at all
times.
• Keep the emergency contact telephone numbers
near your telephone at all times.
WSM000001INI0009US0
KiSC issued 04, 2017 A
10. INFORMATIONV3800-CR-TE4(C), V3800-CR-TIE4(C), V3800-TIE4(C) (DOC only), WSM
I-5
2. SPECIFICATIONS
• The specification described above is of the standard engine of each model.
• Conversion Formula : HP = 0.746 kW, PS = 0.7355 kW
9Y1210651INI0001US0
Model V3800-CR-TE4 V3800-CR-TE4C V3800-CR-TIE4 V3800-CR-TIE4C
Number of Cylinder 4
Engine Type Vertical, water-cooled, 4-cycle DI diesel engine
Bore x Stroke 100 × 120 mm (3.94 × 4.72 in.)
Total Displacement 3769 cm3
(230.0 cu.in.)
SAE Gross Continuous
64.7 kW / 2600 min-1
(rpm)
(86.8 HP / 2600 min-1
(rpm))
75.0 kW / 2600 min-1
(rpm)
(101 HP / 2600 min-1
(rpm))
SAE Gross Intermittent
74.5 kW / 2600min-1
(rpm)
(99.9 HP / 2600 min-1
(rpm))
86.3 kW / 2600min-1
(rpm)
(116 HP / 2600 min-1
(rpm))
Maximum Bare Speed 2800 min-1
(rpm)
Minimum Bare Idling Speed 800 min-1
(rpm)
Combustion Chamber Reentrant Type, Center Direct Injection Type (E-CDIS)
Fuel Injection Pump
DENSO Common Rail System
Governor
Injector
Fuel Injection Timing
Fuel Injection Pressure
Direction of Rotation Counter-clockwise (Viewed from flywheel side)
Firing Order 1-3-4-2
Compression Ratio 17.5
Lubricating System Forced lubrication by trochoid pump
Oil Pressure Indicating Electrical Type Switch
Lubricating Filter Full Flow Paper Filter (Cartridge Type)
Cooling System Pressurized radiator, forced circulation with water pump
Starting System Electric Starting with Starter
Starter Motor 12 V, 3.0 kW
Starting Support Device Intake Air Heater in Intake Manifold
EGR External EGR (EGR Cooler + Electric EGR Valve + Reed Valve)
Battery 12 V, 136 AH equivalent
Charging Alternator 12 V, 540 W
Fuel Diesel Fuel No. 2-D S15, see page G-8.
Lubricating Oil
Class CJ-4 lubricating oil as per API classification is recommended.
For details on recommended lubricating oils, see page G-8.
Lubricating Oil Capacity 13.2 L (3.49 U.S.gals)
Weight (Dry) 325 kg (716 lbs)
KiSC issued 04, 2017 A
11. INFORMATIONV3800-CR-TE4(C), V3800-CR-TIE4(C), V3800-TIE4(C) (DOC only), WSM
I-6
• The specification described above is of the standard engine of each model.
• Conversion Formula : HP = 0.746 kW, PS = 0.7355 kW
9Y1210651INI0017US0
Model V3800-TIE4 V3800-TIE4C
Number of Cylinder 4
Engine Type Vertical, water-cooled, 4-cycle DI diesel engine
Bore x Stroke 100 × 120 mm (3.94 × 4.72 in.)
Total Displacement 3769 cm3
(230.0 cu.in.)
SAE Gross Continuous
48.2 kW / 2400 min-1
(rpm)
(64.6 HP / 2400 min-1
(rpm))
SAE Gross Intermittent
55.4 kW / 2400min-1
(rpm)
(74.3 HP / 2400 min-1
(rpm))
Maximum Bare Speed 2600 min-1
(rpm)
Minimum Bare Idling Speed 800 min-1
(rpm)
Combustion Chamber Reentrant Type, Center Direct Injection Type (E-CDIS)
Fuel Injection Pump
DENSO Common Rail System
Governor
Injector
Fuel Injection Timing
Fuel Injection Pressure
Direction of Rotation Counter-clockwise (Viewed from flywheel side)
Firing Order 1-3-4-2
Compression Ratio 17.0
Lubricating System Forced lubrication by trochoid pump
Oil Pressure Indicating Electrical Type Switch
Lubricating Filter Full Flow Paper Filter (Cartridge Type)
Cooling System Pressurized radiator, forced circulation with water pump
Starting System Electric Starting with Starter
Starter Motor 12 V, 3.0 kW
Starting Support Device Intake Air Heater in Intake Manifold
EGR External EGR (EGR Cooler + Electric EGR Valve + Reed Valve)
Battery 12 V, 136 AH equivalent
Charging Alternator 12 V, 540 W
Fuel Diesel Fuel No. 2-D S15, see page G-8.
Lubricating Oil
Class CJ-4 lubricating oil as per API classification is recommended.
For details on recommended lubricating oils, see page G-8.
Lubricating Oil Capacity 13.2 L (3.49 U.S.gals)
Weight (Dry) 324 kg (714 lbs)
KiSC issued 04, 2017 A
15. INFORMATIONV3800-CR-TE4(C), V3800-CR-TIE4(C), V3800-TIE4(C) (DOC only), WSM
I-10
4. DIMENSIONS
9Y1210651INI0004US0
V3800-CR-TE4 V3800-CR-TE4C V3800-CR-TIE4 V3800-CR-TIE4C
A 890.0 mm (35.04 in.)
B 581.0 mm (22.87 in.)
C 852.0 mm (33.54 in.)
KiSC issued 04, 2017 A
17. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
18. INFORMATIONV3800-CR-TE4(C), V3800-CR-TIE4(C), V3800-TIE4(C) (DOC only), WSM
I-12
5. WIRING DIAGRAM
[1] ENGINE INTERMEDIATE HARNESS (ENGINE SIDE HARNESS)
NOTE
• The picture shows the pin arrangement of the connector housing viewed from wire side, not mating side.
9Y1210651INI0005US0
(1) − CAN and EGR
(2) CN202 Intake Air Temperature Sensor
(3) CN203 Coolant Temperature Sensor
(4) CN215 Engine Joint Connector 1
(5) CN204 Rail Pressure Sensor
(6) CN205 Crankshaft Position Sensor
(7) CN216 Engine Joint Connector 2
(8) CN206 Resistance Connector (1.1 kΩ)
(9) CN207 Oil Pressure Switch
(10) CN208 Boost Pressure Sensor
(11) CN209 / 210 Supply Pump
(12) CN211 Camshaft Position Sensor
(13) CN212 Intake Throttle Valve
(14) − Shield Cable
KiSC issued 04, 2017 A
19. INFORMATIONV3800-CR-TE4(C), V3800-CR-TIE4(C), V3800-TIE4(C) (DOC only), WSM
I-13
NOTE
• The picture shows the pin arrangement of the connector housing viewed from wire side, not mating side.
9Y1210651INI0006US0
(1) − CAN and EGR
(2) CN221 Engine Joint Connector 3
(3) CN223 EGR Valve
(4) CN226 Resistance Connector (120 Ω)
(5) CN224/225 Can Tool
(6) CN222 Engine Joint Connector 4
(7) − Shield Cable
KiSC issued 04, 2017 A
20. INFORMATIONV3800-CR-TE4(C), V3800-CR-TIE4(C), V3800-TIE4(C) (DOC only), WSM
I-14
[2] INJECTOR INTERMEDIATE HARNESS
(ENGINE SIDE HARNESS)
NOTE
• The picture shows the pin arrangement of the connector housing viewed from wire side, not mating side.
9Y1210651INI0007US0
(1) CN302 Injector Intermediate Connector
(2) − Shield Cable
(3) CN301 Injector
KiSC issued 04, 2017 A