Featuring the HMD Kontro Model GSA Frame 0 , Salute to HMD's Steve Miles Streek, Spotlight on GPM Inc, GSA Flyer Introduction

1. The GSA (ASME-standard) Frame 0 Pump is one
of three HMD Kontro general-service-application
pumps designed for comprehensive duty and
extensive applications. The Frame 0, along with the
GSA Frame I and Frame II pumps, maximizes
the interchangeability of components and
can be supplied in either close-coupled or
separate-mounted configurations.
The close-coupled option is outside the
scope of ANSI specifications, often referred
to as “Sub-Ansi”. The GSA 0 pump’s casing
remains dimensionally interchangeable.
All liquid ends are interchangeable within
the frame size, as are drive components;
all of which provide the optimum match of
hydraulic and magnetic performance.
The GSA Frame 0 pump is engineered with a single fully-trapped gasket, sealing the pressure boundary
(to prevent blow out). The gasket is constructed of compressed synthetic fiber (CSF), with options of
PTFE or Graphite. All Tapped openings (casing drain, RTD or Thermocouple) are plugged with material
to match the casing.
THE STOCK DEPOT: YOUR #1 SAME DAY SOURCE FOR HMD KONTRO PUMPS AND PARTS
TheKontroQ arterly
2nd Quarter 2018
The Kontro Quarterly Editor:
Brent Keeter, Inside Sales /
Stock Depot Manager –
bkeeter@liquidhandlingequip.com
Other Contacts:
Jeff VanHolten, Service Manager
jvanholten@liquidhandlingequip.com
Andy Diggs, General Manager
adiggs@liquidhandlingequip.com
Neal Mann, President
nmann@liquidhandlingequip.com
John Hickner,
Mechanical Engineer
jhickner@liquidhandlingequip.com
Jess Dillard, Application Engineer
jdillard@liquidhandlingequip.com
Published by:
The Stock Depot
2311 Executive Street
Charlotte, North Carolina 28208
Mailing Address:
P.O. Box 668525
Charlotte, NC 28266-8525
Phone:
704-399-8700 • 800-872-8414
Fax: 704-393-2412
Website:
www.liquidhandlingequip.com
Email: lhe@liquidhandlingequip.com
IN THIS ISSUE
The Dynamic HMD Kontro
GSA Frame 0 Pump
Kontro Quarterly Salutes
Steven Miles Streek
CHANNEL PARTNER SPOTLIGHT
GPM, Inc.
Brent’s Blurb
The Dynamic HMD Kontro GSA Frame 0 Pump
Key Design Features:
• NO SEALS to minimize maintenance and asso-
ciated costs, as well as eliminate potential leaks
• Sealless Design for total containment,
essential for hazardous, aggressive, or valuable
product
• Interchangeable Components for maximum
convenience, reduced inventory, and minimal
operator training, etc.
• Super Efficient Wet End to benefit maximum
flow / head coverage
• Broad Choice of Materials to allow for choice
of various metals in your pump’s construction
• Fully-Contained Gasket to eliminate risk of
blowout
• Universal Connection Options to allow
suction and discharge flange connections that
can be configured to your exact requirements
• Modular Rotating Element Cartridge to pro-
vide the most efficient method to perform replace-
ments and manage your spare parts inventory
(Continued on next page.)
GSA Frame 0 Pump
Performance of the GSA/GSI Frame 0 Pump

2. TheKontroQ arterlyKontroQuarterly
Salute
The Kontro Quarterly Salutes Steven Miles Streek
For 23 consecutive years / 33 total intermittent years, Steve Streek has served
HMD Kontro in numerous positions from lathe turner to R&D technician to contractor,
evolving to fitter / machinist / project leader to shift supervisor and finally to field service
engineer / customer services.
Steve reminisces about his varied and storied career at HMD Kontro. He made multiple
attempts to leave, but always returned because of circumstances. His job history is
an interesting one that entails immigrating to Canada, working at a chicken factory for
three years and a vacuum pump company for eight. Once securely back in the HMD
fold since September 2007, Steve has stayed put, albeit in different positions.
Steve loves working at HMD because of the friends he has made over the years, some of whom have remained
steadfast for the past 33 years! Steve claims, “We can’t see ourselves anywhere else. Goodness knows, I’ve tried.”
Outside of work, Steve has a love / hate relationship with the gym. Working out helps
with his love of good food washed down with a few beers.
He enjoys soccer, which he still plays at the semi-pro level. Steve runs marathons, has
competed in triathlons, and has taken part in different sports from cricket to water skiing.
It seems HMD runs in the family. Steve met his wife Kim when she was employed by
HMD and his daughter Katy has worked several summers as a document controller
for the HMD contracts team. Spending time with his family is always a priority. Steve’s
daughter at 17 is a challenge, particularly since, as he claims, “She thinks I’m from
another planet!”
Proud to represent HMD Kontro, Steve believes in the quality and value of HMD Kontro
pumps. “I think our pumps are the simplest designed and the easiest to maintain when
used properly. My current job is always challenging because I have to discover how or
why a pump isn’t performing right.”
The Kontro Quarterly proudly salutes Steve Streek for his continuing dedication to HMD Kontro and
his extensive experience that has served the company so well!
Steven Miles Streek
HMD Senior
Field Service Engineer
Customer Services
HMDKontro
SeallessPumps
Pump Model Sizes
1 1.5 x 1 x 5
2 3 x 1.5 x 5
3 3 x 2 x 5
4 1.5 x 1 x 6H
5 3 x 1.5 x 6H
Design Range Limits
The GSA 0 pump is designed to operate from -40°C
up to +260°C, -40°C up to +500°F without the need
for any ancillary cooling medium. Design working
pressure is 18.9 bar, 275 psi.
Solids Handling Capability
The unit is capable of handling solids up to 5% w/w
with 150 microns.
Options - Materials of Construction
• Wetted parts 316SS, Alloy 20, Alloy C, Alloy B
• Internal bearings SiC / Carbon
• Gaskets CSF, Graphoil, PTFE
Other Options
• Casing drains flanged or screwed
• Jacketed pump casing
• Coupling housing drain
• Large range of pump protection
The Dynamic HMD Kontro GSA Frame 0 Pump (continued)
The GSA MAG-Drive Frame 0 Pump is available for Same-Day Delivery from the Stock Depot in
Charlotte, NC. Call us to learn how the HMD Kontro GSA Frame 0 Pump can go to work for you!
The picture above, is
Steve with his daughter
before her prom. He
served as chauffeur for
the evening.

3. The Stock Depot
ChannelPartnerSpotlight GPM, Inc.
For over 40 years, GPM, Inc. has served the liquid pumping and fluid handling industries. The company,
known for its industry expertise, sells industrial products and attendant solutions in the upper Mid-West.
The purpose of GPM boils down to the manufacture and
distribution of world-class products and custom solutions
to help customers solve problems and improve their bottom
lines. Consisting of 67 total employees, GPM has three
locations with headquarters located in Duluth, MN
and two branch locations in Apple Valley, MN (MSP)
and Bismarck, ND.
If you need to pump it, blow it, heat it, seal it, move it,
gear it, or cool it, GPM offers service and provides
repair capabilities in the following fields:
• Pump & Motor Repair • Gearbox Repair
• Precision Balancing • Specialized Coatings
• Fabrication • CNC Machining
• Reverse Engineering • Failure Analysis
• Pump and Motor Testing • Field Service
• ...and Much More
Representing HMD Kontro for over a decade, GPM is
an Authorized Service Center for Sundyne/HMD Kontro
Pumps. It believes that HMD Kontro pumps are the toughest,
most reliable of all the pumps on the market. Because every
situation is different, the company recommends the best pump
for the specific application.
HMD Kontro experts at GPM include:
1. Sales: Andrew Christensen and Chris Kinner
2. Service: Mike Siebenaler
www.gpmco.com
HMD Kontro CS Pump
Success Story
This success story is brief because it required an easy solution provided by the powerful
HMD Kontro Sealless MAG pump.
The customer, CHS in Mankato, MN continued to have issues with leaky mechanical seals that prematurely
failed, especially when serving hot-oil applications.
At GPM’s recommendation, CHS began employing its first HMD Kontro pumps many years ago.
Over time, CHS has consistently replaced aged or failed pumps with HMD Kontro pumps. CHS claims
it cannot find a more robust sealless mag-drive pump on the market. As such, GPM continues to
recommend and install the super dependable, leakless, easy-to-maintain HMD Kontro Sealless pump.
CHS is extremely pleased with the reliability of its HMD Kontro pumps and the service GPM provides.

4. The Stock Depot
Same-DayDelivery!
TheKontroQ arterly The Stock Depot
Enjoy your Zero candy bars in honor of
the dynamic GSA Frame 0 Pump!
Brent Keeter
Editor /
Inside Sales
Brent’s Blurb
From the Editor: Now that we’re in the steamy month of August
with only four months left in 2018, it’s a good point in time to reset your sales goals.
The Stock Depot wants to make it easy for you to increase this year’s sales by
by featuring the dynamic HMD Kontro GSA Frame 0 pump in this issue.
In addition, there are also the powerful Frame I and the Frame II ASME-Standard
GSA Pumps that along with the Frame 0 are the bread and butter of the Stock
Depot’s inventory, complete with units and parts that are available 24/7.
Brent’sBlurb
The Stock Depot at Liquid Handling Equipment, Inc. • Office: 704-399-8700 • Toll Free: (800)-872-8414
Cell: 704-460-6432 • Fax: 704-393-2412 • Email: bkeeter@liquidhandlingequipment.com
The following superior ANSI GSA Pump features should help you win
an order over the competition!
Features of the Dynamic GSA Pump
• Same-Day turnaround via the Stock Depot in Charlotte, NC
• Sealless design for total product containment
• No mechanical seals to replace
• ONE fully-contained casing / containment shell / gasket
• Frame sizes and range of drives allow for specification
of all denominations
• ASNI-Dimensional accommodations
• Ideal for handling hydrocarbons, as well as toxic, aggressive,
hot, and / or variable products
• Modular, high-efficiency wet ends
• Engineered to ensure maximum flow / head coverage
across all ranges
• Choice of various metallic construction materials
• Impressive temperature range up to 600°F
• One Year Warranty
All three GSA pumps display powerful performance and commanding
specifications for wide-duty and multiple-based applications.
Call or email me to request our new GSA Pump flyer
for all the details.
Remember…Service Sells Pumps!
Very truly yours,
Brent Keeter
Performance of the GSA/GSI Frame I Pumps Performance of the GSA/GSI Frame II Pumps