This document is a service manual that provides safety and technical information for servicing a vertical crankshaft engine. It contains 11 sections covering topics like safety, troubleshooting, fuel and lubrication systems, disassembly, inspection and reassembly. The manual outlines important safety precautions and identifies engine components. It also provides specifications for recommended fuels and oils.
Toro reelmaster 6700 d (kubota engine) mower service repair manualfujsjejfkskekem
This document is the service manual for the Reelmaster 6500-D/6700-D. It contains safety instructions, maintenance procedures, troubleshooting steps, and repair instructions for the machine's various systems. The manual instructs technicians to use this manual along with other relevant manuals, such as the Kubota engine manual, when servicing the machine. It provides important safety warnings and information for properly maintaining and repairing the Reelmaster.
Toro reelmaster 6500 d (peugeot engine) mower service repair manualfujsjejfkskekem
This document provides safety instructions for servicing the Reelmaster 6500-D and 6700-D. It outlines key safety practices including wearing protective equipment, reading manuals thoroughly before operating equipment, keeping children away from the area, avoiding loose clothing near moving parts, and handling fuel carefully. The instructions emphasize operating the machine only after understanding how to stop it quickly and making sure all safety devices are in good condition.
Toro reelmaster 5510 mower service repair manualfujsjejfkskekem
This service manual provides information for troubleshooting, testing, and repairing major systems and components of the Reelmaster 5010 series mowers, including the 5210, 5410, 5510, and 5610 models. It covers the product records, maintenance, Kubota diesel engine, hydraulic system, electrical system, chassis, cutting units, and groomer. Safety instructions are provided at the beginning to ensure safe operation, maintenance, and repair of the mowers.
Toro groundsmaster 4000 d service repair manualfujsjejfkskekem
This service manual provides information for technicians to troubleshoot, test, and repair major systems on the Toro Groundsmaster 4000-D utility vehicle. It includes chapters covering safety, product records and maintenance, the Kubota diesel engine, hydraulic system, electrical system, axles/brakes, chassis, and cutting units. Technicians should refer to operator's manuals for operating instructions and to original manufacturer manuals included for additional engine information.
Toro greensmaster flex 18 (04018) service repair manualfujsjejfkskekem
This document is a service manual that provides information for troubleshooting, testing, and repairing components of the Greensmaster Flex 18 and 21 models. It contains chapters covering safety, product records and maintenance, the engine, traction and reel drive systems, electrical systems, chassis and controls, cutting units, and groomers. Each chapter provides specifications, general information, and procedures for service and repairs of the relevant systems. Safety instructions are provided at the beginning, emphasizing the importance of following safety precautions when operating or servicing the mower.
This service manual provides information to service and repair components on the Greensmaster 1000/1600 golf course mower. It covers safety instructions, product records, the engine, traction and reel drive systems, electrical systems, controls, wheels, accessories, cutting units, and a grooming reel kit. Chapters provide specifications, adjustments, troubleshooting steps, and repair procedures for each system.
This document provides specifications and troubleshooting information for STIHL Series 4144 engine components, including the FC 56, FS 40/50/56, and KM 56 models. It covers the engine, fuel system, ignition system, tightening torques, and troubleshooting guides for the clutch, rewind starter, ignition system, carburetor, and engine. The document also provides instructions for servicing various engine components.
1975 johnson evinrude outboard 18 hp service repair manualfujsjejfkskekem
This short document repeats itself and encourages the reader to click a link for more information. It thanks the reader twice for reading and directs them to click a link in order to obtain additional information on an unspecified topic.
Toro reelmaster 6700 d (kubota engine) mower service repair manualfujsjejfkskekem
This document is the service manual for the Reelmaster 6500-D/6700-D. It contains safety instructions, maintenance procedures, troubleshooting steps, and repair instructions for the machine's various systems. The manual instructs technicians to use this manual along with other relevant manuals, such as the Kubota engine manual, when servicing the machine. It provides important safety warnings and information for properly maintaining and repairing the Reelmaster.
Toro reelmaster 6500 d (peugeot engine) mower service repair manualfujsjejfkskekem
This document provides safety instructions for servicing the Reelmaster 6500-D and 6700-D. It outlines key safety practices including wearing protective equipment, reading manuals thoroughly before operating equipment, keeping children away from the area, avoiding loose clothing near moving parts, and handling fuel carefully. The instructions emphasize operating the machine only after understanding how to stop it quickly and making sure all safety devices are in good condition.
Toro reelmaster 5510 mower service repair manualfujsjejfkskekem
This service manual provides information for troubleshooting, testing, and repairing major systems and components of the Reelmaster 5010 series mowers, including the 5210, 5410, 5510, and 5610 models. It covers the product records, maintenance, Kubota diesel engine, hydraulic system, electrical system, chassis, cutting units, and groomer. Safety instructions are provided at the beginning to ensure safe operation, maintenance, and repair of the mowers.
Toro groundsmaster 4000 d service repair manualfujsjejfkskekem
This service manual provides information for technicians to troubleshoot, test, and repair major systems on the Toro Groundsmaster 4000-D utility vehicle. It includes chapters covering safety, product records and maintenance, the Kubota diesel engine, hydraulic system, electrical system, axles/brakes, chassis, and cutting units. Technicians should refer to operator's manuals for operating instructions and to original manufacturer manuals included for additional engine information.
Toro greensmaster flex 18 (04018) service repair manualfujsjejfkskekem
This document is a service manual that provides information for troubleshooting, testing, and repairing components of the Greensmaster Flex 18 and 21 models. It contains chapters covering safety, product records and maintenance, the engine, traction and reel drive systems, electrical systems, chassis and controls, cutting units, and groomers. Each chapter provides specifications, general information, and procedures for service and repairs of the relevant systems. Safety instructions are provided at the beginning, emphasizing the importance of following safety precautions when operating or servicing the mower.
This service manual provides information to service and repair components on the Greensmaster 1000/1600 golf course mower. It covers safety instructions, product records, the engine, traction and reel drive systems, electrical systems, controls, wheels, accessories, cutting units, and a grooming reel kit. Chapters provide specifications, adjustments, troubleshooting steps, and repair procedures for each system.
This document provides specifications and troubleshooting information for STIHL Series 4144 engine components, including the FC 56, FS 40/50/56, and KM 56 models. It covers the engine, fuel system, ignition system, tightening torques, and troubleshooting guides for the clutch, rewind starter, ignition system, carburetor, and engine. The document also provides instructions for servicing various engine components.
1975 johnson evinrude outboard 18 hp service repair manualfujsjejfkskekem
This short document repeats itself and encourages the reader to click a link for more information. It thanks the reader twice for reading and directs them to click a link in order to obtain additional information on an unspecified topic.
1975 johnson evinrude outboard 15 hp service repair manualfujsjejfkskekem
This short document repeats itself and encourages the reader to click a link for more information. It thanks the reader twice for reading and directs them to click a link in order to obtain additional information on an unspecified topic.
Yamaha edl13000 te generator service repair manualfujsjejfkskekem
This service manual provides information for technicians to service a Yamaha generator. It includes specifications, maintenance procedures, troubleshooting guides, and exploded diagrams. Technicians are expected to have a basic understanding of generator repair. Safety warnings are marked throughout and instruct technicians to replace certain parts like gaskets during repairs. Special tools are also listed that may be required for some procedures.
Toro reelmaster 5410 mower service repair manualfujsjejfkskekem
This service manual provides information for troubleshooting, testing, and repairing major systems and components of the Reelmaster 5010 series mowers, including the 5210, 5410, 5510, and 5610 models. It covers the product records, maintenance, Kubota diesel engine, hydraulic system, electrical system, chassis, cutting units, and groomer. Safety instructions are provided at the beginning to ensure safe operation, maintenance, and repair of the mowers.
Toro reelmaster 3100 d mower service repair manualfujsjejfkskekem
This document is a service manual for the Reelmaster 3100-D that provides information for troubleshooting, testing, and repairing major systems and components. It directs technicians to refer to operator manuals for operating instructions and contains safety information for technicians performing maintenance and repairs. The manual is divided into chapters covering product records and manuals, the Kubota diesel engine, hydraulic system, electrical system, wheels/brakes, and cutting units.
Toro groundsmaster 7210 service repair manualfujsjejfkskekem
This service manual provides information to technicians for troubleshooting, testing, and repairing major systems and components of the Toro Groundsmaster 7200 and 7210 turf maintenance machines. It contains chapters covering safety, product records and maintenance, the Kubota diesel engine, hydraulic system, electrical system, chassis, cutting deck, and foldout diagrams. Technicians are directed to use genuine Toro replacement parts for repairs to maintain safety certification. Proper jacking instructions and safety precautions are also provided when working on the machine.
Toro groundsmaster 580 d mower service repair manualfujsjejfkskekem
This document provides safety instructions for operating, maintaining, and servicing the Groundsmaster 580-D. It outlines important safety precautions that must be followed before, during, and after operating the machine. Personal protective equipment is recommended, as are daily checks of safety devices and controls. Proper maintenance and avoiding distractions are emphasized to prevent accidents and injury.
Toro groundsmaster 455 d mower service repair manualfujsjejfkskekem
This service manual provides information to technicians for troubleshooting, testing, and repairing major systems and components of the Groundsmaster 455-D. It contains specifications, diagrams, maintenance procedures, and safety instructions. Technicians should follow all safety procedures when working on the machine to prevent injury.
Toro greensmaster flex 21 service repair manualfujsjejfkskekem
This document is a service manual for the Greensmaster Flex 21 that provides technicians with information to troubleshoot, test, and repair components. It instructs technicians to refer to the operator's manual for operating instructions and maintenance. The manual contains several chapters covering the engine, drive systems, electrical systems, cutting units, and safety information. It provides specifications, adjustments, repairs, and troubleshooting guides for each system to assist technicians in servicing the machine.
This service manual provides information for technicians to troubleshoot, test, and repair major systems and components of the Greensmaster 3100 and 3050 golf course mowers. It contains chapters covering the engine, hydraulic system, electrical system, wheels/steering/brakes, various cutting unit types, and safety information. Technicians should follow the safety instructions when operating or performing maintenance on the mowers.
The document provides specifications and repair procedures for STIHL MS 341 and MS 361 chainsaws. It covers topics such as the engine, fuel system, ignition system, clutch, chain drive, brake, rewind starter, carburetor, and other systems. Troubleshooting charts are provided for issues like the clutch not engaging properly, the starter rope breaking or not rewinding, and other problems. Detailed steps are outlined for repairs, with specifications on torque and tools required.
Stihl km 56 kombi motor service repair manualfujsjejfkskekem
This document provides specifications and troubleshooting information for STIHL Series 4144 engine components, including the FC 56, FS 40/50/56, and KM 56 models. It covers the engine, fuel system, ignition system, tightening torques, and troubleshooting guides for the clutch, rewind starter, ignition system, carburetor, and engine. The document also includes sections on removing and installing various engine components and systems.
Stihl km 55 kombi motor service repair manualfujsjejfkskekem
This document provides specifications and troubleshooting information for STIHL components 4140 FC, FS, HL, KM from 2003-2010. It covers topics such as fuel system specifications, gearbox types, tightening torques, and troubleshooting issues with the clutch, rewind starter, fuel system, and engine. Procedures for servicing components like the carburetor, rewind starter, throttle control, and fuel system are also described. The document aims to aid repair shops in servicing and repairing these STIHL machines.
Stihl hl 45 hedge trimmer service repair manualfujsjejfkskekem
This document provides service information for STIHL models FS 45, 46, 55, FC 55, HL 45, and KM 55 powerheads. It covers specifications, safety precautions, troubleshooting, and repair procedures for engine components such as the rewind starter, throttle control, fuel system, and drive tube. Detailed instructions are given for removing, installing, and servicing parts, along with required tools and torque specifications for fasteners.
This document provides specifications and troubleshooting information for the STIHL Series 4144 Powerhead used on several models from 2008-01. It includes the following sections:
1. Introduction
2. Safety Precautions
3. Specifications on the engine, ignition system, and tightening torques
4. Troubleshooting for the clutch and ignition system
5. Instructions for servicing the clutch drum
6. Instructions for servicing the engine
7. Instructions for servicing the ignition system
8. List of special servicing tools
9. Notes on servicing aids
The document provides detailed repair instructions, specifications, and troubleshooting tips for technicians servicing the STIHL Series 4
This document provides specifications and repair instructions for STIHL chain saw models 034, 036, and 036 QS. It includes details on the engine, fuel system, ignition system, cutting attachment, tightening torques, and repair procedures for various components such as the clutch, chain brake, cylinder, and ignition system. The document aims to aid service technicians in repairing and servicing these chain saw models by STIHL.
1975 johnson evinrude outboard 9.9 hp service repair manualfujsjejfkskekem
This short document repeats itself and encourages the reader to click a link for more information. It thanks the reader twice for reading and directs them to click a link in order to obtain additional information on an unspecified topic.
This service manual provides information for servicing Kohler SV710-SV840 series engines. It contains sections on safety, maintenance, specifications, tools, troubleshooting, and repair/replacement of engine systems. The maintenance section outlines routine maintenance tasks such as oil and filter changes and component inspections. The specifications section lists physical dimensions, torque specifications, and other technical details. Dismantling and reassembly procedures are provided for repairing engine components and systems.
This service manual provides information on maintenance, specifications, troubleshooting, and repair procedures for Kohler SV710-SV840 engines. The manual covers safety precautions, maintenance schedules and procedures, specifications, tools required for repair, and step-by-step disassembly/reassembly instructions. Torque specifications and clearance specifications are provided for engine components. The manual also includes parts identification numbers and diagrams.
Kohler courage sv620 vertical crankshaft engine service repair manualfujsjejfkskekem
This document provides specifications and maintenance instructions for Kohler SV470-SV620 engines. It includes sections on safety, maintenance, specifications, tools and aids, troubleshooting, and disassembly/reassembly. The maintenance schedule recommends procedures such as changing the oil every 100 hours and adjusting the valves every 200 hours. The specifications section lists engine dimensions, identification numbers, displacement, oil capacity, and torque specifications for fasteners.
1964 johnson evinrude outboard 18 hp service repair manualfujsjejfkskekem
This document provides specifications for starter rope diameter and length for various engine sizes and model years of outboard motors. It lists the engine size in horsepower, model year, rope diameter in inches, and rope length range in inches. For example, it lists that for a 1.5 hp engine from 1968-1970 the starter rope diameter is 3/82712 inches. It provides this data in a table format for various engine sizes from 1.5 hp to 40 hp made between 1956-1970.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
1975 johnson evinrude outboard 15 hp service repair manualfujsjejfkskekem
This short document repeats itself and encourages the reader to click a link for more information. It thanks the reader twice for reading and directs them to click a link in order to obtain additional information on an unspecified topic.
Yamaha edl13000 te generator service repair manualfujsjejfkskekem
This service manual provides information for technicians to service a Yamaha generator. It includes specifications, maintenance procedures, troubleshooting guides, and exploded diagrams. Technicians are expected to have a basic understanding of generator repair. Safety warnings are marked throughout and instruct technicians to replace certain parts like gaskets during repairs. Special tools are also listed that may be required for some procedures.
Toro reelmaster 5410 mower service repair manualfujsjejfkskekem
This service manual provides information for troubleshooting, testing, and repairing major systems and components of the Reelmaster 5010 series mowers, including the 5210, 5410, 5510, and 5610 models. It covers the product records, maintenance, Kubota diesel engine, hydraulic system, electrical system, chassis, cutting units, and groomer. Safety instructions are provided at the beginning to ensure safe operation, maintenance, and repair of the mowers.
Toro reelmaster 3100 d mower service repair manualfujsjejfkskekem
This document is a service manual for the Reelmaster 3100-D that provides information for troubleshooting, testing, and repairing major systems and components. It directs technicians to refer to operator manuals for operating instructions and contains safety information for technicians performing maintenance and repairs. The manual is divided into chapters covering product records and manuals, the Kubota diesel engine, hydraulic system, electrical system, wheels/brakes, and cutting units.
Toro groundsmaster 7210 service repair manualfujsjejfkskekem
This service manual provides information to technicians for troubleshooting, testing, and repairing major systems and components of the Toro Groundsmaster 7200 and 7210 turf maintenance machines. It contains chapters covering safety, product records and maintenance, the Kubota diesel engine, hydraulic system, electrical system, chassis, cutting deck, and foldout diagrams. Technicians are directed to use genuine Toro replacement parts for repairs to maintain safety certification. Proper jacking instructions and safety precautions are also provided when working on the machine.
Toro groundsmaster 580 d mower service repair manualfujsjejfkskekem
This document provides safety instructions for operating, maintaining, and servicing the Groundsmaster 580-D. It outlines important safety precautions that must be followed before, during, and after operating the machine. Personal protective equipment is recommended, as are daily checks of safety devices and controls. Proper maintenance and avoiding distractions are emphasized to prevent accidents and injury.
Toro groundsmaster 455 d mower service repair manualfujsjejfkskekem
This service manual provides information to technicians for troubleshooting, testing, and repairing major systems and components of the Groundsmaster 455-D. It contains specifications, diagrams, maintenance procedures, and safety instructions. Technicians should follow all safety procedures when working on the machine to prevent injury.
Toro greensmaster flex 21 service repair manualfujsjejfkskekem
This document is a service manual for the Greensmaster Flex 21 that provides technicians with information to troubleshoot, test, and repair components. It instructs technicians to refer to the operator's manual for operating instructions and maintenance. The manual contains several chapters covering the engine, drive systems, electrical systems, cutting units, and safety information. It provides specifications, adjustments, repairs, and troubleshooting guides for each system to assist technicians in servicing the machine.
This service manual provides information for technicians to troubleshoot, test, and repair major systems and components of the Greensmaster 3100 and 3050 golf course mowers. It contains chapters covering the engine, hydraulic system, electrical system, wheels/steering/brakes, various cutting unit types, and safety information. Technicians should follow the safety instructions when operating or performing maintenance on the mowers.
The document provides specifications and repair procedures for STIHL MS 341 and MS 361 chainsaws. It covers topics such as the engine, fuel system, ignition system, clutch, chain drive, brake, rewind starter, carburetor, and other systems. Troubleshooting charts are provided for issues like the clutch not engaging properly, the starter rope breaking or not rewinding, and other problems. Detailed steps are outlined for repairs, with specifications on torque and tools required.
Stihl km 56 kombi motor service repair manualfujsjejfkskekem
This document provides specifications and troubleshooting information for STIHL Series 4144 engine components, including the FC 56, FS 40/50/56, and KM 56 models. It covers the engine, fuel system, ignition system, tightening torques, and troubleshooting guides for the clutch, rewind starter, ignition system, carburetor, and engine. The document also includes sections on removing and installing various engine components and systems.
Stihl km 55 kombi motor service repair manualfujsjejfkskekem
This document provides specifications and troubleshooting information for STIHL components 4140 FC, FS, HL, KM from 2003-2010. It covers topics such as fuel system specifications, gearbox types, tightening torques, and troubleshooting issues with the clutch, rewind starter, fuel system, and engine. Procedures for servicing components like the carburetor, rewind starter, throttle control, and fuel system are also described. The document aims to aid repair shops in servicing and repairing these STIHL machines.
Stihl hl 45 hedge trimmer service repair manualfujsjejfkskekem
This document provides service information for STIHL models FS 45, 46, 55, FC 55, HL 45, and KM 55 powerheads. It covers specifications, safety precautions, troubleshooting, and repair procedures for engine components such as the rewind starter, throttle control, fuel system, and drive tube. Detailed instructions are given for removing, installing, and servicing parts, along with required tools and torque specifications for fasteners.
This document provides specifications and troubleshooting information for the STIHL Series 4144 Powerhead used on several models from 2008-01. It includes the following sections:
1. Introduction
2. Safety Precautions
3. Specifications on the engine, ignition system, and tightening torques
4. Troubleshooting for the clutch and ignition system
5. Instructions for servicing the clutch drum
6. Instructions for servicing the engine
7. Instructions for servicing the ignition system
8. List of special servicing tools
9. Notes on servicing aids
The document provides detailed repair instructions, specifications, and troubleshooting tips for technicians servicing the STIHL Series 4
This document provides specifications and repair instructions for STIHL chain saw models 034, 036, and 036 QS. It includes details on the engine, fuel system, ignition system, cutting attachment, tightening torques, and repair procedures for various components such as the clutch, chain brake, cylinder, and ignition system. The document aims to aid service technicians in repairing and servicing these chain saw models by STIHL.
1975 johnson evinrude outboard 9.9 hp service repair manualfujsjejfkskekem
This short document repeats itself and encourages the reader to click a link for more information. It thanks the reader twice for reading and directs them to click a link in order to obtain additional information on an unspecified topic.
This service manual provides information for servicing Kohler SV710-SV840 series engines. It contains sections on safety, maintenance, specifications, tools, troubleshooting, and repair/replacement of engine systems. The maintenance section outlines routine maintenance tasks such as oil and filter changes and component inspections. The specifications section lists physical dimensions, torque specifications, and other technical details. Dismantling and reassembly procedures are provided for repairing engine components and systems.
This service manual provides information on maintenance, specifications, troubleshooting, and repair procedures for Kohler SV710-SV840 engines. The manual covers safety precautions, maintenance schedules and procedures, specifications, tools required for repair, and step-by-step disassembly/reassembly instructions. Torque specifications and clearance specifications are provided for engine components. The manual also includes parts identification numbers and diagrams.
Kohler courage sv620 vertical crankshaft engine service repair manualfujsjejfkskekem
This document provides specifications and maintenance instructions for Kohler SV470-SV620 engines. It includes sections on safety, maintenance, specifications, tools and aids, troubleshooting, and disassembly/reassembly. The maintenance schedule recommends procedures such as changing the oil every 100 hours and adjusting the valves every 200 hours. The specifications section lists engine dimensions, identification numbers, displacement, oil capacity, and torque specifications for fasteners.
1964 johnson evinrude outboard 18 hp service repair manualfujsjejfkskekem
This document provides specifications for starter rope diameter and length for various engine sizes and model years of outboard motors. It lists the engine size in horsepower, model year, rope diameter in inches, and rope length range in inches. For example, it lists that for a 1.5 hp engine from 1968-1970 the starter rope diameter is 3/82712 inches. It provides this data in a table format for various engine sizes from 1.5 hp to 40 hp made between 1956-1970.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Top-Quality AC Service for Mini Cooper Optimal Cooling PerformanceMotor Haus
Ensure your Mini Cooper stays cool and comfortable with our top-quality AC service. Our expert technicians provide comprehensive maintenance, repairs, and performance optimization, guaranteeing reliable cooling and peak efficiency. Trust us for quick, professional service that keeps your Mini Cooper's air conditioning system in top condition, ensuring a pleasant driving experience year-round.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
2. Contents
Section 1. Safety and General Information ............................................................................
Section 2. Special Tools ..........................................................................................................
Section 3. Troubleshooting .....................................................................................................
Section 4. Air Cleaner and Air Intake System ........................................................................
Section 5. Fuel System and Governor ....................................................................................
Section 5B. Electronic Fuel Injection (EFI) Fuel System ......................................................
Section 6. Lubrication System ................................................................................................
Section 7. Retractable Starter .................................................................................................
Section 8. Electrical System and Components .....................................................................
Section 9. Disassembly ...........................................................................................................
Section 10. Inspection and Reconditioning ...........................................................................
Section 11. Reassembly...........................................................................................................
2
1
4
5
3
5B
8
9
10
11
6
7
3. 1.1
Section 1
Safety and General Information
Section 1
Safety and General Information
Safety Precautions
To ensure safe operation please read the following statements and understand their meaning. Also
refer to your equipment manufacturer's manual for other important safety information. This manual
contains safety precautions which are explained below. Please read carefully.
WARNING
Warning is used to indicate the presence of a hazard that can cause severe personal injury, death,
or substantial property damage if the warning is ignored.
CAUTION
Caution is used to indicate the presence of a hazard that will or can cause minor personal injury or
property damage if the caution is ignored.
NOTE
Note is used to notify people of installation, operation, or maintenance information that is important
but not hazard-related.
For Your Safety!
These precautions should be followed at all times. Failure to follow these precautions could result in
injury to yourself and others.
CV17-745
Rotating Parts can cause severe
injury.
Stay away while engine is in
operation.
WARNING
Rotating Parts!
Keep hands, feet, hair, and
clothing away from all moving
parts to prevent injury. Never
operate the engine with covers,
shrouds, or guards removed.
Hot Parts can cause severe burns.
Do not touch engine while operating
or just after stopping.
WARNING
Hot Parts!
Engine components can get
extremely hot from operation. To
prevent severe burns, do not
touch these areas while the
engine is running—or immediately
after it is turned off. Never operate
the engine with heat shields or
guards removed.
Accidental Starts can cause
severe injury or death.
Disconnect and ground spark plug
leads before servicing.
WARNING
Accidental Starts!
Disabling engine. Accidental
starting can cause severe injury
or death. Before working on the
engine or equipment, disable the
engine as follows: 1) Disconnect the
spark plug lead(s). 2) Disconnect
negative (-) battery cable from
battery.
4. 1.2
Section 1
Safety and General Information
Carbon Monoxide can cause
severe nausea, fainting or death.
Do not operate engine in closed or
confined area.
WARNING WARNING
Electrical Shock can cause injury.
Do not touch wires while engine is
running.
CAUTION
Uncoiling Spring can cause severe
injury.
Wear safety goggles or face
protection when servicing retractable
starter.
WARNING
Explosive Gas can cause fires and
severe acid burns.
Charge battery only in a well
ventilated area. Keep sources of
ignition away.
Lethal Exhaust Gases!
Engine exhaust gases contain
poisonous carbon monoxide.
Carbon monoxide is odorless,
colorless, and can cause death if
inhaled. Avoid inhaling exhaust
fumes, and never run the engine
in a closed building or confined
area.
Spring Under Tension!
Retractable starters contain a
powerful, recoil spring that is under
tension. Always wear safety
goggles when servicing retractable
starters and carefully follow
instructions in "Retractable Starter"
Section 7 for relieving spring
tension.
Explosive Gas!
Batteries produce explosive
hydrogen gas while being
charged. To prevent a fire or
explosion, charge batteries only in
well ventilated areas. Keep
sparks, open flames, and other
sources of ignition away from the
battery at all times. Keep batteries
out of the reach of children.
Remove all jewelry when servicing
batteries.
Before disconnecting the negative
(-) ground cable, make sure all
switches are OFF. If ON, a spark
will occur at the ground cable
terminal which could cause an
explosion if hydrogen gas or
gasoline vapors are present.
Electrical Shock!
Never touch electrical wires or
components while the engine is
running. They can be sources of
electrical shock.
Explosive Fuel can cause fires and
severe burns.
Stop engine before filling fuel tank.
WARNING
Explosive Fuel!
Gasoline is extremely flammable
and its vapors can explode if
ignited. Store gasoline only in
approved containers, in well
ventilated, unoccupied buildings,
away from sparks or flames. Do not
fill the fuel tank while the engine is
hot or running, since spilled fuel
could ignite if it comes in contact
with hot parts or sparks from
ignition. Do not start the engine
near spilled fuel. Never use
gasoline as a cleaning agent.
Cleaning Solvents can cause
severe injury or death.
Use only in well ventilated areas
away from ignition sources.
WARNING
Flammable Solvents!
Carburetor cleaners and solvents
are extremely flammable. Keep
sparks, flames, and other sources
of ignition away from the area.
Follow the cleaner manufacturer’s
warnings and instructions on its
proper and safe use. Never use
gasoline as a cleaning agent.
5. 1.3
Section 1
Safety and General Information
Engine Identification Numbers
When ordering parts, or in any communication
involving an engine, always give the Model,
Specification and Serial Numbers, including letter
suffixes if there are any.
The engine identification numbers appear on a decal,
or decals, affixed to the engine shrouding. See Figure
1-1. An explanation of these numbers is shown in
Figure 1-2.
Figure 1-1. Engine Identification Decal Location.
Figure 1-2. Explanation of Engine Identification Numbers.
A. Model No.
Version Code
S = Electric Start
C V 18 S
Command Engine
Vertical Crankshaft
Horsepower
17 = 17 HP
18 = 18 HP
20 = 20 HP
22 = 22 HP
23 = 23 HP
25 = 25 HP
26 = 26 HP
Numerical Designation
730
740
745
or
Identification
Decal
Variation of
Basic Engine
B. Spec. No. 61500
Engine Model Code
Code Model
72 CV17
61 CV18
65 CV20
67 CV22 (624 cc)
69 CV25
75 CV22/23 (674 cc)
79 CV26
CV730-0001
CV740-0001
CV745-0001
Complete Spec Number
(Incorporating Model
No. with Variation No. of
Basic Spec.)
or
C. Serial No.
Year Manufactured Code
Code Model
21 1991
22 1992
23 1993
24 1994
25 1995
26 1996
27 1997
28 1998
Factory Code
3305810334
Code Model
29 1999
30 2000
31 2001
32 2002
33 2003
34 2004
35 2005
6. 1.4
Section 1
Safety and General Information
Oil Recommendations
Using the proper type and weight of oil in the
crankcase is extremely important. So is checking oil
daily and changing oil regularly. Failure to use the
correct oil, or using dirty oil, causes premature engine
wear and failure.
Oil Type
Use high-quality detergent oil of API (American
Petroleum Institute) Service Class SG, SH, SJ or
higher. Select the viscosity based on the air
temperature at the time of operation as shown in the
following table.
Refer to Section 6 - “Lubrication System” for detailed
procedures on checking the oil, changing the oil and
changing the oil filter.
Fuel Recommendations
WARNING: Explosive Fuel!
Gasoline is extremely flammable and its vapors can
explode if ignited. Before servicing the fuel system,
make sure there are no sparks, open flames or other
sources of ignition nearby as these can ignite gasoline
vapors. Disconnect and ground the spark plug leads to
prevent the possibility of sparks from the ignition system.
General Recommendations
Purchase gasoline in small quantities and store in clean,
approved containers. A container with a capacity of 2
gallons or less with a pouring spout is recommended.
Such a container is easier to handle and helps eliminate
spillage during refueling.
Do not use gasoline left over from the previous season,
to minimize gum deposits in your fuel system and to
ensure easy starting.
Do not add oil to the gasoline.
Do not overfill the fuel tank. Leave room for the fuel to
expand.
Fuel Type
For best results, use only clean, fresh, unleaded
gasoline with a pump sticker octane rating of 87 or
higher. In countries using the Research method, it
should be 90 octane minimum.
Unleaded gasoline is recommended as it leaves less
combustion chamber deposits and reduces harmful
exhaust emissions. Leaded gasoline is not
recommended and must not be used on EFI engines,
or on other models where exhaust emissions are
regulated.
Gasoline/Alcohol blends
Gasohol (up to 10% ethyl alcohol, 90% unleaded
gasoline by volume) is approved as a fuel for Kohler
engines. Other gasoline/alcohol blends are not
approved.
Gasoline/Ether blends
Methyl Tertiary Butyl Ether (MTBE) and unleaded
gasoline blends (up to a maximum of 15% MTBE by
volume) are approved as a fuel for Kohler engines.
Other gasoline/ether blends are not approved.
NOTE: Using other than service class SG, SH, SJ or
higher oil or extending oil change intervals
longer than recommended can cause engine
damage.
NOTE: Synthetic oils meeting the listed
classifications may be used with oil changes
performed at the recommended intervals.
However to allow piston rings to properly seat,
a new or rebuilt engine should be operated for
at least 50 hours using standard petroleum
based oil before switching to synthetic oil.
A logo or symbol on oil containers identifies the API
service class and SAE viscosity grade. See Figure 1-3.
*Use of synthetic oil having 5W-20 or 5W-30 rating is
acceptable, up to 40°F.
**Synthetic oils will provide better starting in extreme cold
(below -10°F).
***
Figure 1-3. Oil Container Logo.
7. Thank you very much
for your reading. Please
Click Here Then Get
More Information.
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
8. 1.5
Section 1
Safety and General Information
¹Perform these maintenance procedures more frequently under extremely dusty, dirty conditions.
²Have a Kohler Engine Service Dealer perform this service.
³Cleanout Kits 25 755 20-S (black) or 25 755 21-S (gold) allow cooling areas to be cleaned without removing shrouds.
Storage
If the engine will be out of service for two months or
more, use the following storage procedure.
1. Clean the exterior surfaces of the engine. On
Electronic Fuel Injected (EFI) engines, avoid
spraying water at the wiring harness or any of the
electrical components.
2. Change the oil and oil filter while the engine is still
warm from operation. See “Change Oil and Oil
Filter” in Section 6.
3. The fuel system must be completely emptied, or
the gasoline must be treated with a stabilizer to
prevent deterioration. If you choose to use a
stabilizer, follow the manufacturer’s
recommendations, and add the correct amount
for the capacity of the fuel system.
Fill the fuel tank with clean, fresh gasoline. Run
the engine for 2 to 3 minutes to get stabilized fuel
into the rest of the system. Close the fuel shut-off
valve when the unit is being stored or transported.
To empty the system, run the engine until the tank
and the system is empty.
4. Remove the spark plugs and add one tablespoon
of engine oil into each spark plug hole. Install the
spark plugs, but do not connect the plug leads.
Crank the engine two or three revolutions.
5. On equipment with an EFI engine, disconnect the
battery or use a battery minder to keep the battery
charged during storage.
6. Store the engine in a clean, dry place.
Periodic Maintenance Instructions
WARNING: Accidental Starts!
Disabling engine. Accidental starting can cause severe injury or death. Before working on the engine or
equipment, disable the engine as follows: 1) Disconnect the spark plug lead(s). 2) Disconnect negative (-)
battery cable from battery.
Maintenance Schedule
These required maintenance procedures should be performed at the frequency stated in the table. They should
also be included as part of any seasonal tune-up.
• Replace fuel filter1
(EFI engines). Section 5B
Daily or Before
Starting Engine
Maintenance Required Refer to:Frequency
• Fill fuel tank. Section 5
• Check oil level. Section 6
• Check air cleaner for dirty1
, loose, or damaged parts. Section 4
• Check air intake and cooling areas, clean as necessary1
. Section 4
• Service precleaner element1
. Section 4Every 25 Hours
• Replace air cleaner element1
. Section 4
• Change oil. (More frequently under severe conditions.) Section 6
• Remove cooling shrouds and clean cooling areas1,3
. Section 4
• Check oil cooler fins, clean as necessary (if equipped). Section 6
• Check spark plug condition and gap. Section 8
• Change oil filter. Section 6
Annually or
Every 500 Hours
• Have bendix starter drive serviced2
. Section 8
• Have solenoid shift starter disassembled and cleaned2
. Section 8
Every 100 Hours
Every 200 Hours
Every 1500 Hours
• Have crankshaft spline lubricated2
. Section 2Every 500 Hours
Every 250 Hours • Replace heavy-duty air cleaner element and check inner element1
. Section 4
9. 1.6
Section 1
Safety and General Information
Figure 1-4. Typical Engine Dimensions CV Series with Standard Flat Air Cleaner.
(Base engine illustrated)
10. 1.7
Section 1
Safety and General Information
Figure 1-5. Typical Engine Dimensions CV Series with Commercial Mower Air Cleaner.
(Base engine illustrated)
11. 1.8
Section 1
Safety and General Information
Figure 1-6. Typical Engine Dimensions CV EFI Series with Heavy-Duty Air Cleaner.
Dimensions in millimeters.
Inch equivalents shown in ().
12. 1.9
Section 1
Safety and General Information
General Specifications1
Power (@ 3600 RPM, corrected to SAE J1995)
CV17 ............................................................................................................................ 12.7 kW (17 HP)
CV18 ............................................................................................................................ 13.4 kW (18 HP)
CV20 ............................................................................................................................ 14.9 kW (20 HP)
CV22/23 ....................................................................................................................... 16.4 kW (22 HP)
CV25, CV730 ............................................................................................................... 18.4 kW (25 HP)
CV26 ............................................................................................................................ 19.4 kW (26 HP)
CV740 .......................................................................................................................... 20.1 kW (27 HP)
CV745 .......................................................................................................................... 20.9 kW (28 HP)
Peak Torque
CV17 - @ 2000 RPM ................................................................................................... 42.9 N·m (31.7 ft. lb.)
CV18 - @ 2200 RPM ................................................................................................... 44.4 N·m (32.8 ft. lb.
CV20 - @ 2600 RPM ................................................................................................... 44.2 N·m (32.6 ft. lb.)
CV22/23 - @ 2200 RPM .............................................................................................. 51.7 N·m (38.2 ft. lb.)
CV25, CV730 - @ 2800 RPM....................................................................................... 54.1 N·m (39.9 ft. lb.)
CV26 - @ 2800 RPM ................................................................................................... 54.2 N·m (40.0 ft. lb.)
CV740 - @ 3000 RPM ................................................................................................. 57.9 N·m (42.7 ft. lb.)
CV745 - @ 2200 RPM ................................................................................................. 60.7 N·m (44.8 ft. lb.)
Bore
CV17 ............................................................................................................................ 73 mm (2.87 in.)
CV18, CV20, CV22 (624 cc) ........................................................................................ 77 mm (3.03 in.)
CV22/23 (674 cc) ......................................................................................................... 80 mm (3.15 in.)
CV25, CV26, CV730-745 ............................................................................................. 83 mm (3.27 in.)
Stroke ................................................................................................................................. 67 mm (2.64 in.)
Displacement
CV17 ............................................................................................................................ 561 cc (34 cu. in.)
CV18, CV20, CV22 (624 cc) ........................................................................................ 624 cc (38 cu. in.)
CV22/23 (674 cc) ......................................................................................................... 674 cc (41 cu. in.)
CV25, CV26, CV730-745 ............................................................................................. 725 cc (44 cu. in.)
Compression Ratio
CV17 ............................................................................................................................ 8.2:1
CV18, CV20, CV22/23 .................................................................................................. 8.5:1
CV25, CV26, CV730-745 ............................................................................................. 9.0:1
Dry Weight
CV17, CV18, CV20, CV22/23 ...................................................................................... 41 kg (90 lb.)
CV25, CV26, CV730-745 ............................................................................................. 43 kg (94 lb.)
Oil Capacity (with filter)
CV17, CV18, CV20, CV22/23
CV25, CV26, CV730-745 ............................................................................................. 1.9 L (2.0 U.S. qt.)
Angle of Operation - Maximum (At Full Oil Level) All Directions ......................................... 25°
Blower Housing and Sheet Metal
M5 Fasteners Torque .................................................................................. 4.0 N·m (35 in. lb.)
1
Values are in Metric units. Values in parentheses are English equivalents. Lubricate threads with engine oil prior
to assembly.