This document is the service manual for the 30SR ACERA and 35SR ACERA compact crawler excavators. It was issued in September 2008 and contains safety and technical information to aid in servicing and repairing the excavators. The manual includes sections covering safety, specifications, maintenance procedures, systems, disassembly/assembly instructions, troubleshooting, and the engine. It provides maintenance schedules, specifications for components, diagrams of hydraulic and electrical systems, and guidance for repairs.
Kobelco 27 sr acera tier 4 compact crawler excavator service repair manualfjjsefkkertsemme
This document is a service manual for the 27SR ACERA compact crawler excavator issued in September 2008. It contains safety and technical information to aid in maintenance and repair work. The manual includes sections on safety, maintenance procedures, systems descriptions, disassembly/assembly instructions, troubleshooting, and the engine.
The document provides formatting guidelines for engineering project reports at Yeditepe University's Department of Electrical and Electronics Engineering. It specifies formatting for [1] page layout including margins, pagination and headings; [2] arrangement including required report sections like the title page, abstract, and bibliography; and [3] final preparation for submission. Adhering to the provided format ensures consistency and readability.
Crown esr4000 series forklift parts catalogue manualfjjsekmmm
This document is a parts manual for the ESR4000 series. It contains 10 sections that cover different parts of the truck like the covers, hydraulic system, electrical components, brakes, steering, mast/lift structure, cylinders, and miscellaneous information. The introduction notes that maintenance and repairs should only be done as outlined in the operator manual and additional work requires an authorized Crown service technician to ensure safety. It provides a table of contents that lists the parts covered in each section along with the page numbers and revisions.
This document provides information on International Bank Account Numbers (IBANs), including:
- An overview of IBAN standards and definitions.
- ISO 13616-compliant IBAN formats for over 70 countries in alphabetical order, with examples of domestic account numbers, BBAN structures, and IBAN structures for each country.
- Contact and historical information for the IBAN Registration Authority.
This document provides style and notation guidelines for authors preparing manuscripts for Physical Review journals. It covers correct formatting for manuscript elements such as the title, author list, sections, references, equations, figures and tables. The guidelines are intended to ensure consistency across Physical Review publications. Authors should follow these instructions to properly format their manuscripts, while individual journals may have additional requirements to consider.
The on-time completion of light rails in the United States: a qualitative com...Sally Indah N
This study examines the combined effect of public resistance, project modifications, and funding source on the on-time completion of 16 light rail projects in the United States. A fuzzy set qualitative comparative analysis (fsQCA) will be used to analyze the combinations of conditions that contribute to on-time completion. The outcome is defined as a project completing within 18.5% of the estimated time. Key conditions include the level of public resistance during construction, modifications to the original project plan, and whether funding came from federal, state, or local sources. Case studies of light rail projects in several US cities will then be compared to the Canadian context to identify lessons for improving transportation policymaking.
The document outlines different types and levels of English including daily, topic, office, business, professional, and technical English. It divides the content into 3 parts that cover daily and topic English, office and business English, and professional English. Examples are provided for various topics within each section such as weather, food, accidents, and different industries for products and services.
The document provides guidelines for formatting Water Research Foundation research reports. It outlines the required sections for reports, including the front matter (half title page, title page, disclaimer page, table of contents, etc.), text (introduction, methods, results, conclusions, recommendations chapters), and back matter (appendices, references, abbreviations). It provides direction on formatting aspects like page dimensions, typeface, headings, pagination, and placement of tables and figures. The document also addresses using copyrighted materials and publishing or presenting project results. Examples of each section are provided in appendices to demonstrate the proper formatting.
Kobelco 27 sr acera tier 4 compact crawler excavator service repair manualfjjsefkkertsemme
This document is a service manual for the 27SR ACERA compact crawler excavator issued in September 2008. It contains safety and technical information to aid in maintenance and repair work. The manual includes sections on safety, maintenance procedures, systems descriptions, disassembly/assembly instructions, troubleshooting, and the engine.
The document provides formatting guidelines for engineering project reports at Yeditepe University's Department of Electrical and Electronics Engineering. It specifies formatting for [1] page layout including margins, pagination and headings; [2] arrangement including required report sections like the title page, abstract, and bibliography; and [3] final preparation for submission. Adhering to the provided format ensures consistency and readability.
Crown esr4000 series forklift parts catalogue manualfjjsekmmm
This document is a parts manual for the ESR4000 series. It contains 10 sections that cover different parts of the truck like the covers, hydraulic system, electrical components, brakes, steering, mast/lift structure, cylinders, and miscellaneous information. The introduction notes that maintenance and repairs should only be done as outlined in the operator manual and additional work requires an authorized Crown service technician to ensure safety. It provides a table of contents that lists the parts covered in each section along with the page numbers and revisions.
This document provides information on International Bank Account Numbers (IBANs), including:
- An overview of IBAN standards and definitions.
- ISO 13616-compliant IBAN formats for over 70 countries in alphabetical order, with examples of domestic account numbers, BBAN structures, and IBAN structures for each country.
- Contact and historical information for the IBAN Registration Authority.
This document provides style and notation guidelines for authors preparing manuscripts for Physical Review journals. It covers correct formatting for manuscript elements such as the title, author list, sections, references, equations, figures and tables. The guidelines are intended to ensure consistency across Physical Review publications. Authors should follow these instructions to properly format their manuscripts, while individual journals may have additional requirements to consider.
The on-time completion of light rails in the United States: a qualitative com...Sally Indah N
This study examines the combined effect of public resistance, project modifications, and funding source on the on-time completion of 16 light rail projects in the United States. A fuzzy set qualitative comparative analysis (fsQCA) will be used to analyze the combinations of conditions that contribute to on-time completion. The outcome is defined as a project completing within 18.5% of the estimated time. Key conditions include the level of public resistance during construction, modifications to the original project plan, and whether funding came from federal, state, or local sources. Case studies of light rail projects in several US cities will then be compared to the Canadian context to identify lessons for improving transportation policymaking.
The document outlines different types and levels of English including daily, topic, office, business, professional, and technical English. It divides the content into 3 parts that cover daily and topic English, office and business English, and professional English. Examples are provided for various topics within each section such as weather, food, accidents, and different industries for products and services.
The document provides guidelines for formatting Water Research Foundation research reports. It outlines the required sections for reports, including the front matter (half title page, title page, disclaimer page, table of contents, etc.), text (introduction, methods, results, conclusions, recommendations chapters), and back matter (appendices, references, abbreviations). It provides direction on formatting aspects like page dimensions, typeface, headings, pagination, and placement of tables and figures. The document also addresses using copyrighted materials and publishing or presenting project results. Examples of each section are provided in appendices to demonstrate the proper formatting.
Kobelco 70 sr acera tier 4 crawler excavator service repair manualfhsejkdkmem
This document is the service manual for the 70SR ACERA Crawler Excavator. It was revised in November 2008 and replaces the previous version. The manual contains 6 sections that cover safety, maintenance, systems, disassembly/assembly, troubleshooting, and the engine. Each section includes multiple chapters that go into more detail on specific topics. Safety precautions are emphasized throughout the manual.
Kobelco 70 sr acera tier 4 crawler excavator service repair manualfjsekdemmd
This document is a service manual for the 70SR ACERA crawler excavator. It was issued in November 2008 and replaces the previous version. The manual contains safety information, specifications, maintenance procedures, troubleshooting guides, and instructions for disassembling and assembling various systems of the excavator. It is intended to assist technicians in servicing and repairing the 70SR ACERA.
Kobelco 70 sr acera tier 4 crawler excavator service repair manualudfjjsjekdkdmm
This document is a service manual for the 70SR ACERA crawler excavator. It was issued in November 2008 and replaces the previous version. The manual contains safety information, specifications, maintenance procedures, troubleshooting guides, and instructions for disassembling and assembling various systems of the excavator. It is intended to assist technicians in servicing and repairing the 70SR ACERA.
Kobelco 70 sr acera tier 4 crawler excavator service repair manualfjskksmem
This document is a service manual for the 70SR ACERA crawler excavator. It was issued in November 2008 and replaces the previous version. The manual contains safety information, specifications, maintenance procedures, troubleshooting guides, and instructions for disassembling and assembling various systems of the excavator. It is intended to be used by service technicians to perform repairs and maintenance.
Kobelco 27 sr acera tier 4 compact crawler excavator service repair manualfjsekdemmd
This document is a service manual for the 27SR ACERA compact crawler excavator issued in September 2008. It contains safety and general information, specifications, maintenance procedures, troubleshooting guides, and instructions for disassembling and assembling systems of the excavator like the hydraulic and electrical systems. The manual provides technical details to aid mechanics in repairing and servicing the 27SR ACERA.
Kobelco 27 sr acera tier 4 compact crawler excavator service repair manualfusjejedrfjskekem
This document is a service manual for the 27SR ACERA compact crawler excavator issued in September 2008. It contains safety and technical information to aid in maintenance and repair work. The manual includes sections on safety, maintenance procedures, systems descriptions, disassembly/assembly instructions, troubleshooting, and the engine.
Kobelco ed150 blade runner acera sr tier 3 excavator dozer service repair manualhfjsekekmmd
This document is the service manual for the ED150 BLADE RUNNER ACERA SR EXCAVATOR DOZER issued in June 2008. It contains safety and general information, specifications, maintenance procedures, troubleshooting guides, and instructions for repairing and replacing components for the excavator dozer. The manual instructs technicians to follow all safety precautions and procedures when servicing the machine.
Kobelco ed150 blade runner acera sr tier 3 excavator dozer service repair manualidkkddmmd
This document is a service manual for the ED150 Blade Runner Acera SR excavator dozer issued in June 2008. It contains safety and general information, specifications, maintenance procedures, troubleshooting guides, and instructions for disassembling and assembling various systems of the excavator dozer. The manual includes tables of contents for its 6 sections and various chapters covering topics like the control system, hydraulic system, and engine.
Kobelco ed150 blade runner acera sr tier 3 excavator dozer service repair manualregdfcgvdgvf
This document is a service manual for the ED150 Blade Runner Acera SR excavator dozer issued in June 2008. It provides specifications, dimensions, maintenance procedures and troubleshooting information for the machine. The manual contains safety and general information sections followed by detailed chapters covering systems, maintenance tasks, and disassembly/assembly of machine components.
New holland eh15 hydraulic excavator service repair manualfijsfjskekmme
This document is a service manual for the EH15 hydraulic excavator. It contains specifications, maintenance procedures, troubleshooting guides, and component level descriptions for the excavator. The manual is divided into multiple sections covering general information, specifications, systems, components, troubleshooting, and the engine. It provides technical information and instructions to aid in servicing and repairing the EH15 excavator.
New holland eh15 hydraulic excavator service repair manualufjjsefkksemme
This document is a service manual for the EH15 hydraulic excavator. It contains specifications, maintenance procedures, troubleshooting guides, and component level descriptions for the excavator. The manual is divided into multiple sections covering general information, specifications, systems, components, troubleshooting, and the engine. It provides technical information and instructions to aid in servicing and repairing the EH15 excavator.
New holland eh15 hydraulic excavator service repair manualudjjsjkkddkmme
This document is a service manual for the EH15 hydraulic excavator. It contains specifications, maintenance procedures, troubleshooting guides, and component level descriptions for the excavator. The manual is divided into multiple sections covering general information, specifications, systems, components, troubleshooting, and the engine. It provides technical information and instructions to aid in servicing and repairing the EH15 excavator.
New holland eh15 hydraulic excavator service repair manualpfiskdmjekm
- This document is a service manual for the EH15 hydraulic excavator that provides specifications, maintenance procedures, and troubleshooting information.
- It contains sections covering general information and safety, specifications, component locations and weights, maintenance standards, torque specifications, hydraulic and electrical systems, individual components, and troubleshooting various systems.
- The manual was published in February 2005 by CNH America for technicians repairing EH15 excavators. It provides the information necessary to properly service and maintain the machine.
Case 570 mxt series 3 loader landscaper operator manualfjjskertefksmem
The document is an operator's manual for a 570MXT Series 3 Tier 3 Loader Landscaper. It provides instructions on the safe operation and maintenance of the machine. The manual contains chapters covering general information about the machine components, safety information and decals, instructions for instruments and controls, operating instructions, lubrication and maintenance procedures, electrical systems, specifications, and an index. It emphasizes the importance of reading and understanding the entire manual before operating the machine.
Case 570 mxt loader landscaper operator manualfujsefksemm
This document provides an overview of a 570MXT loader landscaper. It begins with definitions of right, left, front and rear as seen from the operator's seat. It then discusses the identification numbers and plates located on the machine that provide its model, serial number and manufacturing year. The main components of the machine are then outlined and labeled in diagrams, including the lift arm support strut, ROPS cab, three point hitch control valve, fuel tank step, and loader controls. Safety information, instructions and maintenance are located in the operator's manual.
Case 570 mxt loader landscaper operator manualfjsekdemmd
This document provides orientation information and safety instructions for operating a 570MXT loader landscaper. It defines right, left, front and rear of the machine, identifies major components, and emphasizes the importance of understanding safety precautions and operating instructions from the manual before using the equipment. The manual contains details on safety decals, instruments and controls, operating instructions, maintenance, and specifications.
This document provides operating instructions for BOGE screw compressors models C3L through C7L. It contains information about safety, installation, operation, maintenance and repairs. The document is divided into 6 parts that cover general safety, product description, installation, troubleshooting, maintenance, and appendices. Maintenance instructions are provided for regular tasks like checking fluid levels, replacing filters, and inspecting safety valves. Replacement parts are listed.
Fiat kobelco e18 mini crawler excavator service repair manualfujdjffjjskkemem
This document appears to be the table of contents for a workshop manual for a mini excavator. It lists 14 sections that will be included in the manual, including sections on safety rules, specifications, maintenance standards, the hydraulic system, electrical system, attachment components, and the upper structure. The sections will provide information on using and maintaining the excavator. The manual will include information such as an index of sections, introduction to the manual, symbols and indications, composition of the manual, and brief instructions for consulting the manual. It provides a high-level overview of the content that will be covered in the excavator workshop manual.
Fiat kobelco e16 mini crawler excavator service repair manualufujjdfjjskekemm
This document appears to be the table of contents for a workshop manual for a mini excavator. It lists 14 sections that will be included in the manual, including sections on safety rules, specifications, maintenance standards, the hydraulic system, electrical system, attachment components, and the upper structure. The sections will provide information on using and maintaining the excavator. The manual will include indexes, introductions, and brief information to help technicians consult it for repair and maintenance needs. It provides a breakdown of all technical information and components that will be covered.
This document contains parts lists and specifications for an engine. It includes lists of parts for the complete engine, crankcase, timing case, oil pan, plugs, cylinder liner and piston, connecting rod and bearings, crankshaft, crankshaft pulley wheel, flywheel, cylinder head, cylinder head cover, and valves. Each part is specified by number, description, dimensions, and quantity.
This document provides parts information for an ARION 500 HEXASHIFT stage IIIb engine. It includes 3 pages of documentation for the cylinder head assembly, listing 20 parts including the cylinder head, gasket, end piece, sleeves, locks, rings, and screws. Preceding pages provide documentation on additional engine assemblies.
Claas arion 500 600 stage iv hexashift tractor parts catalogue manual (sn a74...dujjsjekkkdmm
The document provides parts lists and descriptions for engine components for ARION 500-600 Stage IV HEXASHIFT machines. It includes lists of parts needed for the crankcase, timing case, flywheel housing, oil pan, and cylinder liner and piston assemblies. The parts lists reference part numbers, descriptions, dimensions, and quantities of components needed for different machine types, including the A74 and A76 models.
More Related Content
Similar to Kobelco 35 sr acera tier 4 compact crawler excavator service repair manual
Kobelco 70 sr acera tier 4 crawler excavator service repair manualfhsejkdkmem
This document is the service manual for the 70SR ACERA Crawler Excavator. It was revised in November 2008 and replaces the previous version. The manual contains 6 sections that cover safety, maintenance, systems, disassembly/assembly, troubleshooting, and the engine. Each section includes multiple chapters that go into more detail on specific topics. Safety precautions are emphasized throughout the manual.
Kobelco 70 sr acera tier 4 crawler excavator service repair manualfjsekdemmd
This document is a service manual for the 70SR ACERA crawler excavator. It was issued in November 2008 and replaces the previous version. The manual contains safety information, specifications, maintenance procedures, troubleshooting guides, and instructions for disassembling and assembling various systems of the excavator. It is intended to assist technicians in servicing and repairing the 70SR ACERA.
Kobelco 70 sr acera tier 4 crawler excavator service repair manualudfjjsjekdkdmm
This document is a service manual for the 70SR ACERA crawler excavator. It was issued in November 2008 and replaces the previous version. The manual contains safety information, specifications, maintenance procedures, troubleshooting guides, and instructions for disassembling and assembling various systems of the excavator. It is intended to assist technicians in servicing and repairing the 70SR ACERA.
Kobelco 70 sr acera tier 4 crawler excavator service repair manualfjskksmem
This document is a service manual for the 70SR ACERA crawler excavator. It was issued in November 2008 and replaces the previous version. The manual contains safety information, specifications, maintenance procedures, troubleshooting guides, and instructions for disassembling and assembling various systems of the excavator. It is intended to be used by service technicians to perform repairs and maintenance.
Kobelco 27 sr acera tier 4 compact crawler excavator service repair manualfjsekdemmd
This document is a service manual for the 27SR ACERA compact crawler excavator issued in September 2008. It contains safety and general information, specifications, maintenance procedures, troubleshooting guides, and instructions for disassembling and assembling systems of the excavator like the hydraulic and electrical systems. The manual provides technical details to aid mechanics in repairing and servicing the 27SR ACERA.
Kobelco 27 sr acera tier 4 compact crawler excavator service repair manualfusjejedrfjskekem
This document is a service manual for the 27SR ACERA compact crawler excavator issued in September 2008. It contains safety and technical information to aid in maintenance and repair work. The manual includes sections on safety, maintenance procedures, systems descriptions, disassembly/assembly instructions, troubleshooting, and the engine.
Kobelco ed150 blade runner acera sr tier 3 excavator dozer service repair manualhfjsekekmmd
This document is the service manual for the ED150 BLADE RUNNER ACERA SR EXCAVATOR DOZER issued in June 2008. It contains safety and general information, specifications, maintenance procedures, troubleshooting guides, and instructions for repairing and replacing components for the excavator dozer. The manual instructs technicians to follow all safety precautions and procedures when servicing the machine.
Kobelco ed150 blade runner acera sr tier 3 excavator dozer service repair manualidkkddmmd
This document is a service manual for the ED150 Blade Runner Acera SR excavator dozer issued in June 2008. It contains safety and general information, specifications, maintenance procedures, troubleshooting guides, and instructions for disassembling and assembling various systems of the excavator dozer. The manual includes tables of contents for its 6 sections and various chapters covering topics like the control system, hydraulic system, and engine.
Kobelco ed150 blade runner acera sr tier 3 excavator dozer service repair manualregdfcgvdgvf
This document is a service manual for the ED150 Blade Runner Acera SR excavator dozer issued in June 2008. It provides specifications, dimensions, maintenance procedures and troubleshooting information for the machine. The manual contains safety and general information sections followed by detailed chapters covering systems, maintenance tasks, and disassembly/assembly of machine components.
New holland eh15 hydraulic excavator service repair manualfijsfjskekmme
This document is a service manual for the EH15 hydraulic excavator. It contains specifications, maintenance procedures, troubleshooting guides, and component level descriptions for the excavator. The manual is divided into multiple sections covering general information, specifications, systems, components, troubleshooting, and the engine. It provides technical information and instructions to aid in servicing and repairing the EH15 excavator.
New holland eh15 hydraulic excavator service repair manualufjjsefkksemme
This document is a service manual for the EH15 hydraulic excavator. It contains specifications, maintenance procedures, troubleshooting guides, and component level descriptions for the excavator. The manual is divided into multiple sections covering general information, specifications, systems, components, troubleshooting, and the engine. It provides technical information and instructions to aid in servicing and repairing the EH15 excavator.
New holland eh15 hydraulic excavator service repair manualudjjsjkkddkmme
This document is a service manual for the EH15 hydraulic excavator. It contains specifications, maintenance procedures, troubleshooting guides, and component level descriptions for the excavator. The manual is divided into multiple sections covering general information, specifications, systems, components, troubleshooting, and the engine. It provides technical information and instructions to aid in servicing and repairing the EH15 excavator.
New holland eh15 hydraulic excavator service repair manualpfiskdmjekm
- This document is a service manual for the EH15 hydraulic excavator that provides specifications, maintenance procedures, and troubleshooting information.
- It contains sections covering general information and safety, specifications, component locations and weights, maintenance standards, torque specifications, hydraulic and electrical systems, individual components, and troubleshooting various systems.
- The manual was published in February 2005 by CNH America for technicians repairing EH15 excavators. It provides the information necessary to properly service and maintain the machine.
Case 570 mxt series 3 loader landscaper operator manualfjjskertefksmem
The document is an operator's manual for a 570MXT Series 3 Tier 3 Loader Landscaper. It provides instructions on the safe operation and maintenance of the machine. The manual contains chapters covering general information about the machine components, safety information and decals, instructions for instruments and controls, operating instructions, lubrication and maintenance procedures, electrical systems, specifications, and an index. It emphasizes the importance of reading and understanding the entire manual before operating the machine.
Case 570 mxt loader landscaper operator manualfujsefksemm
This document provides an overview of a 570MXT loader landscaper. It begins with definitions of right, left, front and rear as seen from the operator's seat. It then discusses the identification numbers and plates located on the machine that provide its model, serial number and manufacturing year. The main components of the machine are then outlined and labeled in diagrams, including the lift arm support strut, ROPS cab, three point hitch control valve, fuel tank step, and loader controls. Safety information, instructions and maintenance are located in the operator's manual.
Case 570 mxt loader landscaper operator manualfjsekdemmd
This document provides orientation information and safety instructions for operating a 570MXT loader landscaper. It defines right, left, front and rear of the machine, identifies major components, and emphasizes the importance of understanding safety precautions and operating instructions from the manual before using the equipment. The manual contains details on safety decals, instruments and controls, operating instructions, maintenance, and specifications.
This document provides operating instructions for BOGE screw compressors models C3L through C7L. It contains information about safety, installation, operation, maintenance and repairs. The document is divided into 6 parts that cover general safety, product description, installation, troubleshooting, maintenance, and appendices. Maintenance instructions are provided for regular tasks like checking fluid levels, replacing filters, and inspecting safety valves. Replacement parts are listed.
Fiat kobelco e18 mini crawler excavator service repair manualfujdjffjjskkemem
This document appears to be the table of contents for a workshop manual for a mini excavator. It lists 14 sections that will be included in the manual, including sections on safety rules, specifications, maintenance standards, the hydraulic system, electrical system, attachment components, and the upper structure. The sections will provide information on using and maintaining the excavator. The manual will include information such as an index of sections, introduction to the manual, symbols and indications, composition of the manual, and brief instructions for consulting the manual. It provides a high-level overview of the content that will be covered in the excavator workshop manual.
Fiat kobelco e16 mini crawler excavator service repair manualufujjdfjjskekemm
This document appears to be the table of contents for a workshop manual for a mini excavator. It lists 14 sections that will be included in the manual, including sections on safety rules, specifications, maintenance standards, the hydraulic system, electrical system, attachment components, and the upper structure. The sections will provide information on using and maintaining the excavator. The manual will include indexes, introductions, and brief information to help technicians consult it for repair and maintenance needs. It provides a breakdown of all technical information and components that will be covered.
Similar to Kobelco 35 sr acera tier 4 compact crawler excavator service repair manual (19)
This document contains parts lists and specifications for an engine. It includes lists of parts for the complete engine, crankcase, timing case, oil pan, plugs, cylinder liner and piston, connecting rod and bearings, crankshaft, crankshaft pulley wheel, flywheel, cylinder head, cylinder head cover, and valves. Each part is specified by number, description, dimensions, and quantity.
This document provides parts information for an ARION 500 HEXASHIFT stage IIIb engine. It includes 3 pages of documentation for the cylinder head assembly, listing 20 parts including the cylinder head, gasket, end piece, sleeves, locks, rings, and screws. Preceding pages provide documentation on additional engine assemblies.
Claas arion 500 600 stage iv hexashift tractor parts catalogue manual (sn a74...dujjsjekkkdmm
The document provides parts lists and descriptions for engine components for ARION 500-600 Stage IV HEXASHIFT machines. It includes lists of parts needed for the crankcase, timing case, flywheel housing, oil pan, and cylinder liner and piston assemblies. The parts lists reference part numbers, descriptions, dimensions, and quantities of components needed for different machine types, including the A74 and A76 models.
Claas arion 500 600 stage iv hexashift tractor parts catalogue manual (sn a76...dujjsjekkkdmm
The document provides parts lists for engines in the ARION 500-600 Stage IV HEXASHIFT machine series. It includes lists of parts for the complete engine, crankcase, timing case, flywheel housing, oil pan, and cylinder liner and piston. The parts lists contain the part numbers, descriptions, quantities, and other specifications for each component. The lists are provided for two different machine types within the series.
Claas arion 460 430 stage iv tractor parts catalogue manual (sn a4300010-a430...dujjsjekkkdmm
This document provides parts lists and specifications for engines in the Arion 460-430 Stage IV product line. It includes 4 engine options with power ratings ranging from 105 to 135 horsepower that meet ECE R120 emissions standards. The parts lists cover components of the crankcase, timing case, flywheel housing, oil pan, cylinder liner and piston, connecting rod, crankshaft, cylinder head, and cylinder head cover. Tolerances and engine number applicability ranges are provided for some part numbers.
Claas arion 460 410 stage iv mr tractor parts catalogue manual (sn a5300010-a...dujjsjekkkdmm
This document contains parts lists and specifications for engine components for an ARION 460-410 Stage IV MR agricultural tractor. It includes lists of engine parts such as cylinders, pistons, connecting rods, crankshafts, pulleys, and other components. Specifications are provided for different engine options varying in horsepower ratings between 67KW and 103KW. Precision measurements are listed for bearing clearances for various engine component options.
Claas arion 460 410 stage iv mr tractor parts catalogue manual (sn a5200010-a...dujjsjekkkdmm
This document contains parts lists and specifications for engine components for an ARION 460-410 Stage IV MR agricultural tractor. It includes lists of engine parts like cylinders, pistons, connecting rods, crankshafts, pulleys, and other components. Specifications are provided for different part numbers, dimensions, quantities, and remarks about standard or non-standard designs.
Claas arion 430 410 tractor parts catalogue manual (sn a2100050-a219999)dujjsjekkkdmm
This document provides parts information for an ARION 430-410 engine. It includes 4 pages listing engine part numbers, descriptions, dimensions and quantities. The document contains specifications for complete engine configurations with and without a 10hp compressor. It also includes sections for individual engine components like the crankcase, timing case, cylinder head and more.
This document provides parts lists and specifications for engines. It includes four pages listing parts by number for the crankcase, timing case, flywheel housing, oil pan, plugs, cylinder liner/piston, connecting rod/bearings, crankshaft, crankshaft pulley wheel, and flywheel. Each part is specified by number, description, dimensions, quantity, and any additional conditions. A key is provided explaining homologation codes mentioned in the conditions.
This document provides parts lists and specifications for engines. It includes:
1) Lists of engine parts with part numbers, descriptions, quantities and additional details like dimensions or conditions.
2) The parts are grouped into categories like crankcase, timing case, oil pan, plugs, cylinder liner and piston, connecting rod, crankshaft, flywheel etc.
3) Additional information is provided for some parts like homologation types, machine numbers, remarks on dimensions or specifications.
This document provides parts lists and specifications for engines. It includes:
1) Lists of engine parts with part numbers, descriptions, quantities and additional details like dimensions or conditions.
2) The parts are grouped into categories like crankcase, timing case, oil pan, plugs, cylinder liner and piston, connecting rod, crankshaft, flywheel etc.
3) Additional information is provided for some parts to specify homologation types, dimensions, machine numbers or remarks.
1) This document provides part numbers, descriptions, dimensions and quantities for various engine components for an ARES 836-816 RZ QUADRISHIFT engine. It includes sections for the crankcase, timing case, flywheel housing, oil pan, plugs, cylinder liner/piston, connecting rod/bearings, crankshaft, pulley wheel and flywheel.
2) Each component lists the part number, description, any relevant dimensions and the quantity required. Additional information includes homologation types, machine numbers and remarks about specifications.
3) The document contains detailed technical specifications for replacement parts for the ARES 836-816 RZ QUADRISHIFT engine across different
This document provides parts lists and specifications for engine components. It includes 3 pages listing parts for a crankcase assembly, including part numbers, descriptions, quantities and specifications. It also includes 3 pages listing parts for a timing case assembly, including the same details. All parts are specified for specific engine models and configurations.
1) The document provides parts lists and descriptions for various engine components for an ARES 720-710 RZ engine, including the crankcase, timing case, flywheel housing, oil pan, plugs, cylinder liner and piston, connecting rod, crankshaft, crankshaft pulley wheel, and flywheel.
2) It lists each part number, description, quantity, and any additional conditions or remarks for over 100 individual parts across 16 assemblies.
3) The parts lists include gaskets, seals, bolts, washers, valves, bearings, and other components, with notes on applicability based on engine serial number ranges.
1) The document provides parts lists and descriptions for various engine components for an ARES 720-710 RZ engine, including the crankcase, timing case, flywheel housing, oil pan, plugs, cylinder liner and piston, connecting rod, crankshaft, crankshaft pulley wheel, and flywheel.
2) It lists each part number, description, quantity, and any additional conditions or remarks for over 100 individual parts across 16 assemblies.
3) The parts lists include gaskets, seals, bolts, washers, valves, bearings, and other components, along with specifications and homologation details for certain parts.
Toyota 7 fd45 forklift service repair manualdujjsjekkkdmm
This document provides an overview of servicing procedures for a Toyota forklift transmission. It includes sections on removal and installation of the torque converter and transmission assembly, disassembly and inspection of the torque converter, and disassembly of the transmission assembly. Procedures are outlined in steps and key points are called out, such as match marking parts during removal and selection of spacer thickness. Standard torque specifications are provided throughout.
Toyota 7 fd40 forklift service repair manualdujjsjekkkdmm
The document provides service procedures for removing and servicing a torque converter and transmission assembly. Key steps include draining the torque converter oil, removing the pilot boss, snap ring, and torque converter. Disassembly of the torque converter involves removing the flexible plate, drive cover, turbine runner, thrust bearing, stator, and pump boss. Inspection and measurements of various components are specified. Reassembly follows the reverse order of disassembly. Tightening torques are provided for multiple fasteners.
Toyota 7 fd35 forklift service repair manualdujjsjekkkdmm
This document provides an overview of servicing procedures for a Toyota forklift transmission. It includes sections on removal and installation of the torque converter and transmission assembly, disassembly and inspection of the torque converter, and disassembly and inspection of the transmission assembly. Procedures are outlined in steps and key points are called out, along with torque specifications and other technical details. References are also provided for engine repair manuals related to servicing the mounted engine.
Toyota 02 7 fg45 forklift service repair manualdujjsjekkkdmm
The document provides service procedures for removing and servicing a torque converter and transmission assembly. Key steps include draining the torque converter oil, removing the pilot boss, snap ring, and torque converter. Disassembly of the torque converter involves removing the flexible plate, drive cover, turbine runner, thrust bearing, stator, and pump boss. Inspection and measurements of various components are described. Reassembly is the reverse of removal. Tightening torques are provided for multiple fasteners.
Toyota 02 7 fg40 forklift service repair manualdujjsjekkkdmm
This document provides an overview of servicing procedures for a Toyota forklift transmission. It includes sections on removal and installation of the torque converter and transmission assembly, disassembly and inspection of the torque converter, and disassembly and inspection of the transmission assembly. Key steps and points of attention are highlighted for each procedure. Reference manuals for related engine repair are also listed. The document aims to provide technicians with information to correctly service the transmission systems of the forklift models covered.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
6. SAFETY
0-III5-17070 EN-US Issued 09-2008 Bur
GENERAL SAFETY INFORMATION
1. Most accidents, which occur during operation,
are due to neglect of precautionary measures
and safety rules. Sufficient care should be taken
to avoid these accidents. Erroneous operation,
lubrication or maintenance services are very
dangerous and may cause injury or death of
personnel. Therefore all precautionar y
measures, NOTES, DANGERS, WARNINGS
and CAUTIONS contained in the manual and on
the machine should be read and understood by
all personnel before starting any work with or on
the machine.
2. Operation, inspection, and maintenance should
be carefully carried out, and safety must be given
the first priority. Messages of safety are indicated
with marks. The safety information contained in
the manual is intended only to supplement safety
codes, insurance requirements, local laws, rules
and regulations.
3. Messages of safety appear in the manual and on
the machine : All messages of safety are
identified by either word of DANGER, WARNING
and CAUTION.
DANGER- Indicates an imminently hazardous
situation which, if not avoided, will result in death
or serious injury and is represented as follows:
WARNING- Indicates a potentially hazardous
situation which, if not avoided, could result in
death or serious injury and is represented as
follows:
CAUTION- Indicates a potentially hazardous
situation which, if not avoided, may result in
minor or moderate injury. It may also be used to
alert against possible damage to the machine
and its components and is represented as
follows:
4. It is very difficult to forecast every danger that
may occur during operation. However, safety can
be ensured by fully understanding proper
operating procedures for this machine according
to methods recommended by Manufacturer.
5. While operating the machine, be sure to perform
work with great care, so as not to damage the
machine, or allow accidents to occur.
6. Continue studying the manual until all Safety,
Operation and Maintenance procedures are
completely understood by all persons working
with the machine.
WARNING
Do not operate or perform any maintenance on this
machine until all instructions found in the
OPERATOR’S MANUAL and this MANUAL have been
thoroughly read and understood.
Improper operation or maintenance of this machine
may cause accidents and could result in serious
injury or death.
Always keep the manual in storage.
If it is missing or damaged, place an order with an
authorized our Distributor for a replacement.
If you have any questions, please consult an
authorized our Distributor.
DANGER
WARNING
CAUTION
7. 0-IV Issued 09-2008 Bur 5-17070 EN-US
SAFETY PRECAUTIONS
The serviceman or mechanic may be unfamiliar with
many of the systems on this machine. This makes it
important to use caution when performing service
work. A knowledge of the system and or components
is important before the removal or disassembly of
any component.
Because of the size of some of the machine compo-
nents, the serviceman or mechanic should check the
weights noted in this manual. Use proper lifting proce-
dures when removing any components. Weight of
components table is shown in the section ; SPECIFI-
CATIONS.
The following is a list of basic precautions that must
always be observed.
1. Read and understand all Warning plates and
decal on the machine before Operating,
Maintaining or Repairing this machine.
2. Always wear protective glasses and protective
shoes when working around machines. In
particular, wear protective glasses when using
hammers, punches or drifts on any part of the
machine or attachments. Use welders gloves,
hood/goggles, apron and the protective clothing
appropriate to the welding job being performed.
Do not wear loose fitting or torn clothing.
Remove all rings from fingers, loose jewelry,
confine long hair and loose clothing before
working on this machinery.
3. Disconnect the battery and hang a Do Not
Operate tag in the Operators Compartment.
Remove ignition keys.
4. If possible, make all repairs with the machine
parked on a firm level surface. Block the machine
so it does not roll while working on or under the
machine. Hang a Do Not Operate tag in the
Operators Compartment.
5. Do not work on any machine that is supported
only by lift, jacks or a hoist. Always use blocks or
jack stands, capable of supporting the machine,
before performing any disassembly.
6. Relieve all pressure in air, oil or water systems
before any lines, fittings or related items are
disconnected or removed. Always make sure all
raised components are blocked correctly and be
alert for possible pressure when disconnecting
any device from a system that utilizes pressure.
7. Lower the bucket, dozer, or other attachments to
the ground before performing any work on the
machine. If this cannot be done, make sure the
bucket, dozer, ripper or other attachment is
blocked correctly to prevent it from dropping
unexpectedly.
8. Use steps and grab handles when mounting or
dismounting a machine. Clean any mud or debris
from steps, walkways or work platforms before
using. Always face to the machine when using
steps, ladders and walkways. When it is not
possible to use the designed access system,
provide ladders, scaffolds, or work platforms to
perform safe repair operations.
9. To avoid back injury, use a hoist when lifting
components which weigh 20kg (45lbs) or more.
Make sure all chains, hooks, slings, etc., are in
good condition and are the correct capacity. Be
sure hooks are positioned correctly. Lifting eyes
are not to be side loaded during a lifting
operation.
10. To avoid burns, be alert for hot parts on
machines which have just been stopped and hot
fluids in lines, tubes and compartments.
11. Be careful when removing cover plates.
Gradually back off the last two capscrews or nuts
located at opposite ends of the cover or device
and carefully pry cover loose to relieve any
spring or other pressure, before removing the
last two capscrews or nuts completely.
12. Be careful when removing filler caps, breathers
and plugs on the machine. Hold a rag over the
cap or plug to prevent being sprayed or splashed
by liquids under pressure. The danger is even
greater if the machine has just been stopped
because fluids can be hot.
WARNING
The proper and safe lubrication and maintenance for
this machine, recommended by Manufacturer, are
outlined in the OPERATOR’S MANUAL for the
machine.
Improper performance of lubrication or maintenance
procedures are dangerous and could result in injury
or death. Read and understand the MANUAL before
performing any lubrication or maintenance.
WARNING
Do not operate this machine unless you have read
and understand the instructions in the OPERATOR’S
MANUAL. Improper machine operation is dangerous
and could result in injury or death.
8. SAFETY
0-V5-17070 EN-US Issued 09-2008 Bur
13. Always use the proper tools that are in good
condition and that are suited for the job at hand.
Be sure you understand how to use them before
performing any service work.
14. Install all fasteners with the same part number.
Do not use a lesser quality fastener if
replacements are necessary.
15. Repairs which require welding should be
performed only with the benefit of the appropriate
reference information and by personnel
adequately trained and knowledgeable in
welding procedures. Determine type of metal
being welded and select correct welding
procedure and electrodes, rods or wire to provide
a weld metal strength equivalent at least to that
of the parent metal. Make sure to disconnect
battery before any welding procedures are
attempted.
16. Do not damage wiring during removal
operations. Reinstall the wiring so it is not
damaged nor will be damaged in operation of the
machine by contacting sharp corners, or by
rubbing against some object or hot surface. Do
not connect wiring to a line containing fluid.
17. Be sure all protective devices including guards
and shields are properly installed and functioning
correctly before starting a repair. If a guard or
shield must be removed to perform the repair
work, use extra caution and replace the guard or
shield after repair is completed.
18. The maintenance and repair work while holding
the bucket raised is dangerous due to the
possibility of a falling attachment. Don’t fail to
lower the attachment and place the bucket to the
ground before starting the work.
19. Loose or damaged fuel, lubricant and hydraulic
lines, tubes and hoses can cause fires. Do not
bend or strike high pressure lines or install ones
which have been bent or damaged. Inspect lines,
tubes and hoses carefully. Do not check for leaks
with your hands. Very small (pinhole) leaks can
result in a high velocity oil stream that will be
invisible close to the hose. This oil can penetrate
the skin and cause personal injury. Use card-
board or paper to locate pinhole leaks.
20. Tighten connections to the correct torque. Make
sure that all heat shields, clamps and guards are
installed correctly to avoid excessive heat,
vibration or rubbing against other parts during
operation. Shields that protect against oil spray
onto hot exhaust components in event of a line,
tube or seal failure must be installed correctly.
21. Do not operate a machine if any rotating part is
damaged or contacts any other part during
operation. Any high speed rotating component
that has been damaged or altered should be
checked for balance before reusing.
22. Be careful when servicing or separating the
tracks (crawlers). Chips can fly when removing
or installing a track (crawlers) pin. Wear safety
glasses and long sleeve protective clothing.
Tracks (crawlers) can unroll very quickly when
separated. Keep away from front and rear of
machine. The machine can move unexpectedly
when both tracks (crawlers) are disengaged from
the sprockets. Block the machine to prevent it
from moving.
9. 0-VI Issued 09-2008 Bur 5-17070 EN-US
NOTE:
This Manual is prepared as a technical material in
which the information necessary for the maintenance
and repairing services of our hydraulic excavators
are collected, and is categorized into 6 Sections,
Safety and General Information, Maintenance,
System, Disassembly, Troubleshooting, and Engine.
The Section Safety and General information
describes the specifications for entire machine
and material, which are instructive for
replacement and repairing of attachments.
The Section Maintenance describes the material,
which is helpful for maintenance service and
adjustments for entire machine.
The Section System describes the operating
system like hydraulic system, electric system,
components, and so on.
The Section Disassembly describes the removal
and installing of assembly mounted on the upper
structure and undercarriage, and the assembling
and disassembling of the associated hydraulic
equipment.
The Section Troubleshooting describes how to
find the fault equipment.
The Section Engine describes the engines
making use of the "Service Manual" provided by
the suppliers.
This Manual may be properly revised due to the
improvement of products, modification of
specifications, etc. And there are cases where the
system on actual machine and a part of the contents
of this manual may differ due to the variations of
specification by countries. For the section in which
the description is hardly understood, contact our
distributor.
The number is assigned to every part handled in this
Manual on account of the description, but the parts,
which cannot be supplied as service parts are
contained. Therefore, the order must be placed with
respective formal number with due confirmation on
the Parts Manual for applicable machine.
10. CHAPTER 2 - UPPER STRUCTURE
2-55-17220 EN-US Issued 09-2008 Bur
SECTION 4 - DISASSEMBLY AND ASSEMBLY
UPPER STRUCTURE
PREFACE
1. This manual describes all the procedures from removing to installing, arranging them by item.
2. This Manual consists of first part; Removing and Installing, and second part; Disassembling and Assembling.
3. The removing and installing can be performed in the procedure specified in Table of Contents, but in view of
actual repairing or time saving some process can be omitted.
4. The removing and installing procedure does not completely cover all possible situations because of differences
of field condition and defective section.
5. Please be aware that procedure to be followed must be determined according to the above conditions.
When disassembly and assembly are required, select the necessary section, itemize the work contents with
good understanding, then starts working.
Specification of Tightening Torque
Tightening torque is indicated as follows, for example:
Tightening torque: 100 Nm (83 pound-ft)
NOTE: Tolerance is ± 10% unless otherwise noted. Refer to chapter on "Tools" for standard tightening torque.
11. 2-6 Issued 09-2008 Bur 5-17220 EN-US
CHAPTER 2 - UPPER STRUCTURE
SECTION 4 - DISASSEMBLY AND ASSEMBLY
REMOVING AND INSTALLING
CANOPY / CAB
Canopy Removal
(1)Remove the floor mats (5) and (8).
(2)Removing handrail (A3)
Loosen the sems-bolt M10× 40 (A9) and M16× 100
(A6) to remove the handrail (A3).
(3)Removing canopy assembly
1. Disconnect the light harness (B1) that runs inside
the support (A2) and is connected to the main
harness with a connector.
2. Loosen one capscrew M16× 65 (A4) and eight
capscrews M12× 55 (A7) to remove the canopy.
Canopy weight : 85 kg (187 lbs)
GRAPHIC_ID Figure 1
8 5
(4)Install the canopy in reverse order of the removal.
Tighten the capscrews at the torque specified
below :
M10 : Tightening torque: 46 Nm (34 pound-ft)
M12 : Tightening torque: 79 Nm (59 pound-ft)
M16 : Tightening torque: 191 Nm (141 pound-ft)
GRAPHIC_ID Figure 2
B2
A7
B1
HARNESS
OUTLETA2
A8
A4
A3
A5
Cab Removal (Option)
Cab removal preparation
(1) Remove the floor mats (6) and (7).
(2) Removing cab harness connector
1) Respectively disconnect 6P connectors of cab
harness and cab connecting harness, 2P
connector of washer motor, 3P connector of
radio (optional) and so on. (See ELECTRICAL
SYSTEM)
GRAPHIC_ID Figure 3
12. 2-75-17220 EN-US Issued 09-2008 Bur
CHAPTER 2 - UPPER STRUCTURE
SECTION 4 - DISASSEMBLY AND ASSEMBLY
Cab removal
(1)Remove the fuel filler cap (A2) and rubber cover
(20).
(2)Removing cover installed on rear of cab
Loosen three sems-bolt M6× 25 (12) for installing
the cover (13).
(3)Removing cab mounting screws
Loosen six capscrews for mounting the cab.
Two capscrews (1) M16× 100
One capscrew (2) M16× 50
Two capscrews (3) M12× 50
One capscrew (24) M12× 40
An extension tool about 1 m (3ft-3.4in) long is
required for removing the capscrew item 1 (with
mark *).
GRAPHIC_ID Figure 4
1213
B
VIEW B
12
3
A2
20
(4)Lifting cab
1. Loosen the sems-bolt M10× 20 (C6) to remove
the seat belt assembly (C2) in advance to
prevent it from interfering with the cab during
lifting.
1. Put slings through the lifting eyes on the cab top
and lift up.
Cab weight : 250 kg (550 lbs)
GRAPHIC_ID Figure 5
(5)Installing cab
Install the cab in reverse order of the removal.
In the fastening position of the capscrew (24), it
is necessary to adjust the clearance with shims
as shown in Fig. 5.
Tighten screws to the torque specified below.
M6 : Tightening torque: 4.4 Nm (3.3 pound-ft)
M10 : Tightening torque: 46 Nm (34 pound-ft)
M12 : Tightening torque: 79 Nm (59 pound-ft)
M16 : Tightening torque: 191 Nm (141 pound-ft)
GRAPHIC_ID Figure 6
A
C2
C6
13. 2-8 Issued 09-2008 Bur 5-17220 EN-US
CHAPTER 2 - UPPER STRUCTURE
SECTION 4 - DISASSEMBLY AND ASSEMBLY
Cab Door Adjustment
(1)When the door is opened and the door is fixed in the place, proper rebound of the rubber stopper in three places
shown in right figure is needed.
For this rebound adjust the pushing depth of rubber from 0.6 to 1mm (0.02 to 0.04in) (In terms of screw rotation,
the depth is equivalent from half turn to three-fourths turn).
After this adjustment, the force for door release becomes about 98 to 118 N (22 to 27 lb.).
Tightening torque of rubber stopper lock nut: 35 to 42 Nm (26 to 31 pound-ft).
pushing
depth
SECTION C-C
RUBBER STOPPER 3 PLACES
14. 2-95-17220 EN-US Issued 09-2008 Bur
CHAPTER 2 - UPPER STRUCTURE
SECTION 4 - DISASSEMBLY AND ASSEMBLY
Guard (Cover)
Removal
Fig. 7 shows the method for removing the cover of
the canopy.
GRAPHIC_ID Figure 7
4
1
5
3
2
A
B
C
D
E
G
(1)Removing hood assembly (2)
Unlock and open the hood assembly (2). Loosen
two capscrews M12× 30 (37) of the hinge section
(2-8) to remove the hood (2).
GRAPHIC_ID Figure 8
37
2
2-8
15. 2-10 Issued 09-2008 Bur 5-17220 EN-US
CHAPTER 2 - UPPER STRUCTURE
SECTION 4 - DISASSEMBLY AND ASSEMBLY
(2)Removing cover assembly (3)
Loosen two M8× 20 sems-bolts (21) and one
M8× 25 sems-bolt to remove the cover assembly
(3).
GRAPHIC_ID Figure 9
21
3
21
45
(3)Removing cover assembly (4)
Loosen three M10× 30 sems-bolts (19) to remove
the cover assembly (4).
(4)Removing cover assembly (5)
Loosen four M10× 30 sems-bolts (19) to remove the
cover assembly (5).
GRAPHIC_ID Figure 10
19
19
19
5
19
19
19
194
(5)Removing cover assembly (1)
1. Unlock the cover (1-8) to open the cover
assembly (1).
2. Loosen two M12 nuts (31) to remove the cover
assembly (1).
GRAPHIC_ID Figure 11
31
1-8
1
16. 2-115-17220 EN-US Issued 09-2008 Bur
CHAPTER 2 - UPPER STRUCTURE
SECTION 4 - DISASSEMBLY AND ASSEMBLY
Installation
Install the above assemblies in reverse order of the removal.
Tighten the capscrews to the torque specified
below :
M8 : Tightening torque: 24 Nm (18 pound-ft)
M10 : Tightening torque: 46 Nm (34 pound-ft)
(Exclude item 19 with * mark)
M12 : Tightening torque: 79 Nm (59 pound-ft)
M16 : Tightening torque: 191 Nm (141 pound-ft)
ltem 19 with * mark : Tightening torque:
19.6~24.5 Nm (15~18pound-ft)
17. 2-12 Issued 09-2008 Bur 5-17220 EN-US
CHAPTER 2 - UPPER STRUCTURE
SECTION 4 - DISASSEMBLY AND ASSEMBLY
FLOOR PLATE ASSEMBLY
Remove floor plate together with the travel pilot valve assembly and the swing pedal in one piece.
Floor Plate Removal Preparation
(1)Remove the floor mats (5) and (8).
(2)Remove the canopy or cab.
(3)Remove the covers (2) and (4) as well as the
plates (3).
(4)Remove the cover assembly (5) of the deck under
the floor.
(5)Disconnect electrical wiring for travel 2-speed
selector switch from the connector portion.
If this machine was equipped with the travel alarm,
disconnect the connectors of electric wirings of
four pressure switches on travel pilot valve.
GRAPHIC_ID Figure 12
WARNING
In advance, disconnect the negative terminal of the
battery to prevent danger of short circuit, etc.
The figure is for the standard canopy.
4
3
1
2
8 5
(6)Removing travel pilot piping (prior to this work,
release the pressure in the piping)
Disconnect hoses of the travel pilot valve (A10) at
the valve side position marked with * and then
plug their openings.
Attach a tag recording the valve connecting port
to each of the disconnected hoses. For
installation, tighten the hose fittings at the
following torque :
NOTE: Take care of the tightening torque as the pilot
valve is made of aluminum. GRAPHIC_ID Figure 13
Tightening Torque
Nm (pound-ft)
Thread size
(PF)
Spanner
used
(mm)
O-ring type
fitting
30° flare type
fitting
1/4 19 26.5 (20) 29.4 (22)
A10
TANK
T
1
2
3
4
P
S/V
A2
C/V
Pb7
C/V
Pa7
C/V
Pa6
C/V
Pb6
(7)Removing cable of swing pedal
1. Loosen four M8× 20 sems-bolts (B11) to pull out
the support (B1) upward.
2. Pull out the pin (B6) and loosen the adjusting nut
to disconnect the control cable (B4).
GRAPHIC_ID Figure 14
NUT
B1
123
B4
B11
B6
18. 2-135-17220 EN-US Issued 09-2008 Bur
CHAPTER 2 - UPPER STRUCTURE
SECTION 4 - DISASSEMBLY AND ASSEMBLY
(8)Removing N&B solenoid piping (prior to this work,
release the pressure in the piping)
Disconnect hoses of the N&B solenoid valve (B5)
at the valve side position marked with * and then
plug their openings.
Attach a tag recording the valve connecting port
to each of the disconnected hoses. For
installation, tighten the hose fittings to the
following torque :
NOTE: Take care of the tightening torque as the pilot
valve is made of aluminum.
GRAPHIC_ID Figure 15
Tightening Torque
Nm (pound-ft)
Thread size
(PF)
Spanner
used
(mm)
O-ring type
fitting
30° flare type
fitting
1/4 19 36.3 (26.8) 29.4 (22)
B5
Pb4
P
P
T
A
B
T
Pa4
C/V
C/V
S/V
S/V
Removal
(1)Remove the M8× 20 sems-bolt (6).
(2)Remove the floor plate assembly (1).
GRAPHIC_ID Figure 16
6
1
Th fi i f th t d d
Assembly
(1)Assemble the floor plate in reverse order of the
disassembly.
Sems-bolt (6) M8 :
Tightening torque : 23.5 Nm (17 pound-ft)
19. 2-14 Issued 09-2008 Bur 5-17220 EN-US
CHAPTER 2 - UPPER STRUCTURE
SECTION 4 - DISASSEMBLY AND ASSEMBLY
BATTERY
Removal Preparation
(1)Remove the floor mats (5) and (8).
(2)Remove the cover (4).
(3)Remove the cover assembly (5) of the lower left
side
GRAPHIC_ID Figure 17
4
8 5
Removal
(1) Disconnect the negative side terminal of the
cable.
(2) Then, disconnect the positive side terminal of the
cable
(3)Loosen the M8 nut (7) to remove the plate (5) and
the rod (4).
(4)Take out the battery (1) holding the straps
attached to it. GRAPHIC_ID Figure 18
WARNING
Follow the removal procedure of battery cable. Firstly
disconnect the grounding side cable. Connect the
grounding side finally. Failure to do so may result in
dangerous situation due to spark.
1
62
4
4
7
7
5
Installation
Install the battery in reverse order of the removal.
Nut (7) M8 :
Tightening torque : 3.5 Nm (2.6 pound-ft)
20. 2-155-17220 EN-US Issued 09-2008 Bur
CHAPTER 2 - UPPER STRUCTURE
SECTION 4 - DISASSEMBLY AND ASSEMBLY
COUNTERWEIGHT
Removal Preparation
1)Remove the cover assemblies (1), (3), (4) and (5)
as well as the hood assembly (2).
(2) Lifting tools preparation
Lifting jigs for counterweight (see Tool list)
Two M20× 35 screws (A)
Wire rope (Nylon sling)
GRAPHIC_ID Figure 19
A
Lifting jig
for counterweight
SLING
SCREW(A)
Removal
(1)Remove the plate (9) and attach the lifting jigs for
counterweight.
(2)Put a rope through the lifting lugs and temporarily
lift up the counterweight so that the rope is not
slack.
Counterweight weight :
370 kg (820 lbs) for 30SR Acera
665 kg (1,470 lbs) for 35SR Acera
(3)Loosen one M20× 90 capscrew (2) and two
M20× 65 capscrews (3).
(4) Remove the shims (5), (6) and (7).
(5) Remove counterweight (1).
GRAPHIC_ID Figure 20
3
4
2
3
4
9
9
1
5
6
7
5
6
7
5
6
7
Installation
(1)Install the counterweight in reverse order of the
removal.
(2)Reinstall the shims (5), (6), and (7).
(3)Lifting counterweight
Make sure that all the three fixing bolts can be
manually screwed.
(4)Apply Loctite #262 on the capscrews (2) and (3)
and tighten them together with the washer (4).
Tightening torque : 373 Nm (275 pound-ft)
(5)Remove lifting jigs.
GRAPHIC_ID Figure 21
21. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
22. 2-16 Issued 09-2008 Bur 5-17220 EN-US
CHAPTER 2 - UPPER STRUCTURE
SECTION 4 - DISASSEMBLY AND ASSEMBLY
PUMP
Removal Preparation
(1)Remove the cover assembly (3) and (5).
(2)Remove the counterweight.
(3)Depressurize the hydraulic oil tank and drain the
hydraulic oil.
Spread a vinyl sheet under the pump to prevent
contamination due to oil leakage.
(4)Loosen clip (B38) to remove the filler neck (B1) of
the fuel supply port to improve workability.
Two sems–bolts M8× 20 (B39)
Tightening torque : 23.5 Nm (17 pound-ft)
GRAPHIC_ID Figure 22
*
*!'
*!
Removal
(1)Disconnecting hoses and fittings connected to the
pump
Attach a tag to each hose for identification.
1. Loosen four M12× 35 capscrews (19) to remove
the tube (14).
2. Remove the pilot delivery hose (B23).
3. Remove the main pump delivery hoses (8), (9)
and (10).
(2)Loosen two M12× 30 capscrews (C4) to remove
the pump (C8).
Pump weight : 28 kg (62 lbs)
GRAPHIC_ID Figure 23
C/V
P1
C/V
P2
C/V
P3
A1
A2
A3
14
19
12
10
8
9
25
25
C4C8
Z
A4B23
S/V
P1
23. CHAPTER 2 - UPPER STRUCTURE
2-175-17220 EN-US Issued 09-2008 Bur
SECTION 4 - DISASSEMBLY AND ASSEMBLY
Installation
Install the pump in reverse order of the removal according to the tightening torque and sealant instructions.
(1)Apply grease to the spline part of the pump input
shaft.
Grease : Shell Retinax AM Grease or equivalent
(Molybdenum disulfide extreme pressure
multipurpose grease)
(2)Insert the pump spline part to the coupling.
(3)Fix the pump by the capscrew (C4).
(4)Install the main pump delivery hoses (8), (9), and
(10), and the pilot delivery hose (B23) (See Fig.
23).
(5)Tighten the capscrew (19) to install the suction
tube (14).
(6)When the suction hose (12) is removed, apply
sealant on the inserted portion of the hose and fix
the tube with the clip (25).
Tightening torque: 5.4 Nm (4.0 pound-ft)
(7)Supply the tank with hydraulic oil (approx. 38 liters
(10 gal)).
(8)Loosen the air bleed valve of the pump to release
air from the casing, and fill it with hydraulic oil (See
Fig. 24).
(9)Reinstall each component removed in the above
removal preparation.
(10)After starting the engine, release air (See
Hydraulic Oil Tank Assembly in this chapter.
GRAPHIC_ID Figure 24
Tightening Torque
Nm (pound-ft)
Thread size
(PF)
Spanner
used
(mm)
O-ring type
fitting
30° flare type
fitting
3/8 22 73.5 (54) 49.0 (36)
1/2 27 108 (80) 78.5 (58)
24. 2-18 Issued 09-2008 Bur 5-17220 EN-US
CHAPTER 2 - UPPER STRUCTURE
SECTION 4 - DISASSEMBLY AND ASSEMBLY
CONTROL VALVE
Removal Preparation
(1)Unlock and open the right upper cover (1).
(2)Remove the right lower cover (4).
Spread a vinyl sheet under the control valve to prevent contamination due to oil leakage.
(3)Release the residual pressure in the circuit and the pressure in the hydraulic oil tank.
Removal
(1) Disconnecting hoses
Disconnect all the hoses connecting to the control valve, and attach blind plugs and tags recording the
installation place.
Remove the return hose to the hydraulic oil tank to improve workability.
GRAPHIC_1D Figure 25
MAIN HYDRAULIC HOSE DISCONNECTION
S/J
E
S/J
F
S/J
B
S/J
A
S/J
C
S/M
B
S/M
A
ARM
(R)
ARM
(H)
BUCKET
(H)
BUCKET
(R)
BOOM
(R)
BOOM
(H)
B1B2
B3
B7
B8
B9
B10
A10
A7
A5
A3
A2
A1
A6
SW/CYL
(H)
A17
SEL/V
B8
A10
A10
A18
NB
(R)
B7
A9
A10A15
A12
A5A8 A15
A7
A7
S/J
DB5B6
SW/CYL
(R)
A6
A14
H/P : Hydraulic pump
S/J : Swivel joint
S/M : Slewing motor
8
H/P
A3
H/P
A2
H/P
P1
P2
P3
9
10
A1
21
23
24
COOLER OIL
(UPPER)
S/M
MHYDRAULIC TANK
T2
Dr1
T1
B4
A4