Knks#312
•Download as DOC, PDF•
0 likes•18 views
This memo provides a weekly update on the qualification status of new automotive products at Cypress Semiconductor Corporation. Ten projects are discussed, with details provided on schedule status, gating items, and planned closure timelines. Key milestones include closing PR5 for several PSoC4A projects by the end of 2019, completing package qualification for new packages, and transferring production from one fab to another.
Report
Share
Report
Share
![AUTOMOTIVE PROJECT PM ID PM PME PE PKG
PKG
CODE
BE SITE Schedule NPP PR1 PR2 PR3 ES100 PR4 PR5
OS 1401 1401 1401 1439 1432 1432 1445
CS 1401C 1401C 1401C 1439C 1601C 1741C 1952
64 TQFP
48 TQFP ASE-KH OS 1438 1440 1444 1448 1544 1550 1539
56 QFN AMKOR CS 1438C 1441C 1445C 1521C 1638C 1926C 1952
28 SSOP AMKOR OS 1709 1709 1709 1730 1741 1743 1818
24 WQFN ASE-KH CS 1709C 1709C 1709C 1741C 1816C 1832C 1952
OS 1748 1748 1748 1802 1851 1902 1904
CS 1748C 1748C 1748C 1806C 1851C 1910C 1952
OS 1927 1927 1927 1939 1952 1952 2013
CS 1927C 1927C 1927C 1939 1952 1952 2013
OS 1817 1817 1817 1826 1837 1839 1852
CS 1817C 1817C 1817C 1904C 1919C 1926C 1952
RODP
JSO
28 SSOP
CML
AUTOLINE
PSOC4A-M 101643 KNKS SNPR
NJF,
AJCM
JSO
PSOC4A 92869 KNKS SNPR
VMAD,
JBO
JSO
PSOC4A-S1 128423 KNKS SNPR
VAU,
JBO
JSO,
RODP
28 SSOP
CML
AUTOLINE
PSOC4A-S1 121324 KNKS SNPR
VMAD,
JBO
ASE-KH
40WQFN ASE-KH
PSOC4A-S3 128444 KNKS SNPR
VMAD,
JBO
JSO 64 TQFP
PSOC4A-S3 128443 KNKS SNPR
VMAD,
JBO
Qualification Status:
1) AUTOMOTIVE PSoC4A [PM ID: 92869]: -
o PR5 CLOSURE – WW52, 2019
I. GOT THE APPROVAL FROM MFRB TO CLOSE PR5 WITH
ONLY F25 MATERIAL
II. PR5 IS GATED BY – PDR5, TEST YIELD & DIE PRICE
AGREEMENT FROM FAB AND CML)
o PTN # 191603 ISSUED FOR DISCONTINUATION OF SW FAB](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recommended
761 27 may_2014
This document provides a summary of recent legal landmarks across various high courts and tribunals in India. It lists 6 cases covering topics such as reassessment, revision, interest on tax refunds, transfer pricing regulations, exemption on sale of residential property, and income from cash credits. For each case, it provides details such as the authority, relevant section/rules, ratio or key considerations from the ruling, case citation, and name of the assessed party.
K RAJ C A
Kamalesh Kumar Raj has over 8 years of experience in compressor application and execution for oil, gas, and fertilizer projects. He currently works as a Senior Engineer in compressor design at Bharat Pumps & Compressors Ltd. in Allahabad, where he is responsible for sizing compressors, preparing technical specifications, and evaluating supplier offers. Some of the major projects he has worked on include packages for IOCL, HPCL, BPCL, and fertilizer plants in India.
Draft vol. ii
This document outlines the requirements for supplying CNG dispensers for GAIL Gas Ltd.'s CNG and city gas distribution project in the Taj Trapezium Zone in India. It specifies the scope of work which includes designing, manufacturing, supplying, installing, testing and commissioning the dispensers. It also details requirements for dispenser specifications, supplier qualifications, training, warranty, maintenance, documentation and approval certifications needed. Technical specifications and maintenance contract documents for the dispensers are provided as annexures to this material requisition specification.
test E4.pptx
This document discusses vehicle/equipment classifications in the Border Roads Organization. It outlines the different classes - Class A (serviceable), Class B (repairable within field workshop capacity), Class C(SP) (not fit for mobilization due to lack of spares), Class DTY (completed estimated life but still usable), and Class D (for disposal). It also explains the difference between a defect report (for newly procured items failing during warranty period) and a premature failure report (for items failing prematurely due to design or manufacturing issues).
QRM Q-2 2019.pptx
This document provides a quarterly review of performance for the Vijaipur Unit from July - September 2019. Key points discussed include:
- Production losses due to a 46 day stoppage of the Urea Plant stream-11 reactor leak. Advice was given on preventative maintenance.
- Inaccurate shutdown planning for Vijaipur-II led to a longer than expected shutdown. Better planning was advised.
- Annual production targets were revised down due to the reactor problem. Further shortfalls were possible without improvements.
- Various key performance metrics and production targets for 2019-20 were reviewed for the Vijaipur complex. Areas of underperformance were highlighted and advice was given to avoid
ARCI part DZ06006.pdf
This document is a form requesting the addition and revision of items to a catalog. It includes 3 items: a motor starting motor, a high side fitting, and a low side fitting. The form provides details on each item such as part number, quantity, price in Rupiah, and other identifying information. It also lists the requestor and approval process for the catalog changes.
NSURB Supplemental Decision
This supplemental decision by the Nova Scotia Utility and Review Board provides context and analysis regarding NSP Maritime Link Inc.'s compliance filing to satisfy conditions imposed in the Board's previous approval of the Maritime Link Project. Specifically, the Board assesses whether the newly executed Energy Access Agreement satisfies the key condition of providing NSPI access to Nalcor's market-priced energy. The Board also considers appropriate reporting requirements for NSPML and whether other conditions have been addressed.
LANDSIDE.pdf
The bolt tightening inspection report summarizes an inspection of temporary tower supports for a landside bridge at Kuwait International Airport's new passenger terminal. The inspection checked 1,152 bolts, nuts, and washers with a diameter of 24mm on structural member EW08-09. All joints were found to meet specifications and be properly tightened with the correct grade bolts, nuts, and washers. The inspection was 50% complete.
Recommended
761 27 may_2014
This document provides a summary of recent legal landmarks across various high courts and tribunals in India. It lists 6 cases covering topics such as reassessment, revision, interest on tax refunds, transfer pricing regulations, exemption on sale of residential property, and income from cash credits. For each case, it provides details such as the authority, relevant section/rules, ratio or key considerations from the ruling, case citation, and name of the assessed party.
K RAJ C A
Kamalesh Kumar Raj has over 8 years of experience in compressor application and execution for oil, gas, and fertilizer projects. He currently works as a Senior Engineer in compressor design at Bharat Pumps & Compressors Ltd. in Allahabad, where he is responsible for sizing compressors, preparing technical specifications, and evaluating supplier offers. Some of the major projects he has worked on include packages for IOCL, HPCL, BPCL, and fertilizer plants in India.
Draft vol. ii
This document outlines the requirements for supplying CNG dispensers for GAIL Gas Ltd.'s CNG and city gas distribution project in the Taj Trapezium Zone in India. It specifies the scope of work which includes designing, manufacturing, supplying, installing, testing and commissioning the dispensers. It also details requirements for dispenser specifications, supplier qualifications, training, warranty, maintenance, documentation and approval certifications needed. Technical specifications and maintenance contract documents for the dispensers are provided as annexures to this material requisition specification.
test E4.pptx
This document discusses vehicle/equipment classifications in the Border Roads Organization. It outlines the different classes - Class A (serviceable), Class B (repairable within field workshop capacity), Class C(SP) (not fit for mobilization due to lack of spares), Class DTY (completed estimated life but still usable), and Class D (for disposal). It also explains the difference between a defect report (for newly procured items failing during warranty period) and a premature failure report (for items failing prematurely due to design or manufacturing issues).
QRM Q-2 2019.pptx
This document provides a quarterly review of performance for the Vijaipur Unit from July - September 2019. Key points discussed include:
- Production losses due to a 46 day stoppage of the Urea Plant stream-11 reactor leak. Advice was given on preventative maintenance.
- Inaccurate shutdown planning for Vijaipur-II led to a longer than expected shutdown. Better planning was advised.
- Annual production targets were revised down due to the reactor problem. Further shortfalls were possible without improvements.
- Various key performance metrics and production targets for 2019-20 were reviewed for the Vijaipur complex. Areas of underperformance were highlighted and advice was given to avoid
ARCI part DZ06006.pdf
This document is a form requesting the addition and revision of items to a catalog. It includes 3 items: a motor starting motor, a high side fitting, and a low side fitting. The form provides details on each item such as part number, quantity, price in Rupiah, and other identifying information. It also lists the requestor and approval process for the catalog changes.
NSURB Supplemental Decision
This supplemental decision by the Nova Scotia Utility and Review Board provides context and analysis regarding NSP Maritime Link Inc.'s compliance filing to satisfy conditions imposed in the Board's previous approval of the Maritime Link Project. Specifically, the Board assesses whether the newly executed Energy Access Agreement satisfies the key condition of providing NSPI access to Nalcor's market-priced energy. The Board also considers appropriate reporting requirements for NSPML and whether other conditions have been addressed.
LANDSIDE.pdf
The bolt tightening inspection report summarizes an inspection of temporary tower supports for a landside bridge at Kuwait International Airport's new passenger terminal. The inspection checked 1,152 bolts, nuts, and washers with a diameter of 24mm on structural member EW08-09. All joints were found to meet specifications and be properly tightened with the correct grade bolts, nuts, and washers. The inspection was 50% complete.
VP-2025JV8J10121-216-B06-001_05_A CODE 1.PDF
This document provides the functional design specification for the advanced process control (APC) system for Unit 216, the diesel hydrotreating unit. It describes the unit's process overview, existing DCS controls, operating targets and constraints. The document then details the APC applications, including the profit controller objectives, strategies and functional design. It outlines the profit controller calculations and inferential control approaches. The APC system aims to optimize the unit operations while meeting product specifications and process constraints.
KEE_RESUME_New_CV16 - Copy (8)
Kee Seong Ming has over 33 years of experience in mechanical and rotating equipment installation, commissioning, and project supervision. He has worked on numerous offshore oil and gas projects in Southeast Asia and the Middle East. Currently, he works as a Senior Mechanical Supervisor for Technip Singapore, overseeing commissioning of rotating equipment on the PETRONAS PFLNG 1 project.
Piston ring kuldeep agrawal
The document is a feasibility report for a proposed piston ring manufacturing company called Agrawal Auto Parts Pvt. Ltd. It includes sections on demand study, location study, raw material study, production capacity, implementation schedule, financial aspects, and financial analysis. The summary is:
1) The report analyzes the feasibility of starting a new piston ring manufacturing business.
2) It studies the demand potential, availability of land and raw materials, expected production capacity of 45,000 sets per year, and a proposed 11 month implementation schedule.
3) The total capital investment is estimated to be Rs. 19.12 lakhs with an expected annual profit of Rs. 12.55 lakhs giving a
Ve modify-compact-substation
The document summarizes a value engineering study conducted to replace oil-filled ring main units (RMUs) with sulfur hexafluoride (SF6) gas-insulated RMUs in compact substations at an electric panel factory in Dammam, Saudi Arabia. The study evaluated 8 RMU manufacturers based on total life cycle costs and recommended selecting RMUs from Saudi Lucy as they had the lowest projected costs over a 15-year period. An implementation plan is outlined to revise compact substation designs and procurement processes to transition to the SF6 RMUs from Saudi Lucy.
Cost Forecast Report
This document provides a project forecast report for the District Cooling Plant for Rihan Heights project. Key details include:
- The project involves designing, constructing, and commissioning a district cooling plant and network.
- The original completion date was delayed by over 200 days due to various client-directed extensions of time for issues including delays obtaining site access and utility connections.
- The forecast completion date is now December 6, 2011.
- The report provides an analysis of project costs, revenues, variances from budget, and risk assessment for worst, most probable, and best case scenarios.
IRJET- Design and Analysis of Catalytic Converter of Automobile Engine
This document summarizes a study on the design and analysis of a catalytic converter for an automobile engine. The researchers designed a baseline catalytic converter model using CAD software and analyzed it using computational fluid dynamics (CFD) to study the pressure and velocity distribution. They found high pressure losses and non-uniform flow distribution. Various modifications to the honeycomb structure diameter, thickness, and position as well as the inlet and outlet design were tested. The optimal design was found to have a centered inlet, conical inlets/outlets, and a honeycomb structure with 30mm holes positioned at the casing mid-length. This design showed improved uniform flow distribution and reduced pressure losses compared to the baseline design.
Caterpillar cat d5 b track tractor (prefix 46x) service repair manual (46x007...
The document provides instructions for removing and installing the fuel priming pump on a Caterpillar D5B track-type tractor. The removal procedure involves turning off the fuel supply, removing bolts and disconnecting tubes to detach the pump. Installation is the reverse of removal, and includes checking and replacing gaskets if needed. Safety notices are provided to keep parts clean and contain fluids.
Prebid-Part-1-C.pdf
The document is the minutes from a pre-bid meeting held on July 30, 2014 for the diversion of 1200mm and 600mm diameter water supply lines at the Metro Line-3 Car Depot in Aarey Colony, Goregaon. It includes questions and responses from bidders on various clauses in the tender document. Key points discussed include allowing physically completed work for qualification criteria, recognizing experience of working as a sub-contractor, allowing joint ventures, provisions for mobilization advance and security deposit refund. An addendum was issued to modify some of the technical qualification criteria and tender submission requirements. A joint site visit was also arranged on August 12, 2014 to help bidders better understand the project alignment.
QA/AC SUPERVISOR ELECTRICAL & INSTRUMENT
Responsibilities: E&I QA/QC
Responsibilities for Field Inspection as per Inspection Testing Plan (ITP’s) Related (E&I)
Jobs.QA/QC with the help of specification, drawings.
Inspection for Material Receiving related Electrical, Instrument as per Indent, Delivery
Note.
Inspection for Cable Laying (E & I) in Cable Trays, Trenches as per cross-sectional
drawings.
Inspection for Cable Trays (E&I) Installation (Perforated, Ladder, Mesh) as per drawing.
Responsible for all Red Marks/As Built drawing as per site modification.
Inspection for Lighting Installation as per circuit diagram, Panel Installation,Transformer
installation.
Inspection for Heating Tracing cables and Testing.
Having Good Knowledge of (NEC) National Electrical Code.
American Petroleum Institute (API ) Standards
IEC- international ELECTROTECHNICAL Commission Standards.
Inspection for the Installation of MCT’s.
Inspection for Lightning Protection (Lightning Arresters).
Inspection for EARTHING Cable Laying, CAD Weld - Exothermic Weld joints,
Earth Bus Bar, EARTHING Test.
Inspection for Motor Installation, Resistance/IR test & Motor torque test.
Inspection for Cable Continuity/IR, Cable termination, EARTHING test.
Prepare the NCR, CAR, TQ, ITP, and Method Statements & RFI’S.
Complete QA/QC Documentation as per Project specification.
Inspection for calibration of PI, PDIT, PT, TT, TE, FT, LT.
Functional Test of Ultrasonic Transmitters, LSL, LSH, LSHH, AT.
Inspection for Field Instrument Installation (PT,FT, LT, Control Valves as per Hook up drawing)
Inspection for Impulse Line Leak test.
Inspection for JB’S Installation, Panels, Cabinets Installation.
Preparing the complete Loop Folders like(DI,DO,AI,AO,RTD for Loop Checking Pre-
Commissioning with the attachments of Instrument loop package index, Functional loop test CR,
Material Receiving Calibration CR, Instrument Installation CR Instrument index, instrument Loop
Diagram & P& ID’S.
Responsible for clear the Punch Points.
Prepare the Final Dossier as per client HOS and Hand over to Mechanical Completion
Department (MC)
Final Walk Down of Hand over System (HOS) with Client.
Aircriaf turbin Engine Reliability and Inspection Investigations.pdf
This study analyzed reliability data for the JT9D, CF6, and PT6 engines over a 36-month period from 1988 to 1991. Controls and accessories were found to account for the largest percentage of in-flight shutdowns across all three engine types. For the JT9D engine, fuel controls and vanes were particular problem areas. Bearings and compressor blades also exhibited reliability issues. Nondestructive inspection procedures were developed for detecting cracks in the JT9D diffuser case and cracks/corrosion in the CF6 turbine mid-frame and compressor rear frame cases.
Caterpillar cat d5 b track tractor (prefix 46x) service repair manual (46x007...
The document provides instructions for removing and installing the fuel priming pump on a Caterpillar D5B track-type tractor. It describes disconnecting fuel lines, removing mounting bolts and base, and reversing the steps to install a new or repaired pump. Similarly, it outlines removing and installing the fuel filter base, removing the fuel transfer pump, and disassembling the fuel transfer pump. Proper cleanup and containment of fluids is emphasized.
Msedcl aar 2018-19
The document provides an executive summary and progress report for the Annual Administration Report for FY 2018-19 of MSEDC Ltd. Some key details include:
- 225 new substations were commissioned in 2018-19 adding 1585 MVA of capacity. 2020 km of 33kV and 22kV transmission lines were also energized.
- System improvement schemes helped reduce distribution losses by adding new substations. Advanced meters were also installed to reduce commercial losses.
- Under R-APDRP and IPDS schemes, strengthening of distribution networks was undertaken across urban areas to reduce losses and ensure 24/7 power supply.
Business partnership opportunity in defense shipbuilding for sme and sc st ci...
Presentation done at CII West meet on MSME meet Dec 17 @ Taj Mumbai India on opportunity for Startups / SC &SY /SMEs in Defense Shipbuilding
Report for po no 7400005491.docx
1. The delivery date for the process water clean-up unit and associated equipment has slipped from December 25, 2023 to January 19, 2024 due to delays in finalizing engineering documents and obtaining approvals.
2. Actions required to expedite the project include expediting approval of outstanding documents, visiting the vendor facility to understand bottlenecks, and following up intensely with sub-vendors to meet delivery dates.
3. A conclusion is provided that delivery from the major vendor is constrained by delivery from its sub-vendor, Flowserve, requiring close follow-up to minimize further delays.
JIMIT JOSHI RESUME & COVER LETTER
Jimit Abhay Joshi is applying for the position of Aircraft Maintenance Technician/Mechanic with the company. He has 5 years and 5 months of experience working as a technician on AgustaWestland 139, Bell 412 and AS365 N3 helicopters, performing inspections, maintenance, and repairs on airframes and engines. He has the necessary qualifications including a BAMEC from DGCA in aircraft maintenance. He believes he is qualified for the role based on his education, experience, and technical skills working on helicopters.
Schematics huawei honor U8960.pdf
This document contains schematics for various components of a smartphone including:
1. Circuit diagrams for the Qualcomm MSM8960 processor showing connections for GPIO pins, JTAG interface, USB, audio, camera, sensors and more.
2. Schematic for the LPDDR2 RAM interface showing signals to and from the memory chips.
3. Diagrams for components like the PM8921 power management chip, audio codec, RF modules and other peripherals connected to the MSM8960 processor.
Gs
This document contains a customized flight segment from London to Copenhagen with additional contact and booking details transferred from the SpeedFares system. It includes outbound and homebound flight segments, ticketing dates, fare amounts, additional passenger contacts, credit card information, and mail/account details for the booking.
State work
This document is the final report for the proposed Anambra State Airport in Nigeria. It provides analysis and recommendations across several areas:
1. Traffic forecasting estimates total passenger and cargo demand reaching over 800,000 passengers per year by 2030 based on analysis of Anambra State's economy and population growth, regional air traffic trends, and benchmarks from comparable airports.
2. The master plan recommends a phased development including an initial 3,000 meter runway sufficient for domestic traffic, later expanding to 3,500 meters for international flights. It also outlines a airfield, taxiway and apron designs to meet Nigerian aviation standards.
3. An environmental review assesses potential impacts and mitigation measures
Cnc
The document is a seminar presentation on CNC machines submitted by Akash Kumar to his professor. It discusses the introduction of CNC machines and their development over time. It then covers the main types of CNC machines, how they work through programming codes, their features, programming format, advantages like reduced errors and complex geometries, disadvantages like high costs, and concludes CNC machines are efficient for large-scale manufacturing.
Project report
The document provides a project report for MM Aqua Technologies Ltd's investment plan for 2014-15 and 2015-16. Key points:
- MM Aqua aims to invest Rs. 20.53 crore to enhance production capacity and develop new products through installing a 4-roll calender line, vacuum forming machine, test cooling tower, and automated cutting system.
- The power, refinery, and water treatment industries in India are expected to grow significantly in the coming years, increasing demand for MM Aqua's cooling tower components and products.
- The investment plan aims to allow MM Aqua to manufacture new product designs internally and boost production capacity to better capture market opportunities and compete against new international competitors entering
Resumes, Cover Letters, and Applying Online
This webinar showcases resume styles and the elements that go into building your resume. Every job application requires unique skills, and this session will show you how to improve your resume to match the jobs to which you are applying. Additionally, we will discuss cover letters and learn about ideas to include. Every job application requires unique skills so learn ways to give you the best chance of success when applying for a new position. Learn how to take advantage of all the features when uploading a job application to a company’s applicant tracking system.
Jill Pizzola's Tenure as Senior Talent Acquisition Partner at THOMSON REUTERS...
Jill Pizzola's tenure as Senior Talent Acquisition Partner at THOMSON REUTERS in Marlton, New Jersey, from 2018 to 2023, was marked by innovation and excellence.
More Related Content
Similar to Knks#312
VP-2025JV8J10121-216-B06-001_05_A CODE 1.PDF
This document provides the functional design specification for the advanced process control (APC) system for Unit 216, the diesel hydrotreating unit. It describes the unit's process overview, existing DCS controls, operating targets and constraints. The document then details the APC applications, including the profit controller objectives, strategies and functional design. It outlines the profit controller calculations and inferential control approaches. The APC system aims to optimize the unit operations while meeting product specifications and process constraints.
KEE_RESUME_New_CV16 - Copy (8)
Kee Seong Ming has over 33 years of experience in mechanical and rotating equipment installation, commissioning, and project supervision. He has worked on numerous offshore oil and gas projects in Southeast Asia and the Middle East. Currently, he works as a Senior Mechanical Supervisor for Technip Singapore, overseeing commissioning of rotating equipment on the PETRONAS PFLNG 1 project.
Piston ring kuldeep agrawal
The document is a feasibility report for a proposed piston ring manufacturing company called Agrawal Auto Parts Pvt. Ltd. It includes sections on demand study, location study, raw material study, production capacity, implementation schedule, financial aspects, and financial analysis. The summary is:
1) The report analyzes the feasibility of starting a new piston ring manufacturing business.
2) It studies the demand potential, availability of land and raw materials, expected production capacity of 45,000 sets per year, and a proposed 11 month implementation schedule.
3) The total capital investment is estimated to be Rs. 19.12 lakhs with an expected annual profit of Rs. 12.55 lakhs giving a
Ve modify-compact-substation
The document summarizes a value engineering study conducted to replace oil-filled ring main units (RMUs) with sulfur hexafluoride (SF6) gas-insulated RMUs in compact substations at an electric panel factory in Dammam, Saudi Arabia. The study evaluated 8 RMU manufacturers based on total life cycle costs and recommended selecting RMUs from Saudi Lucy as they had the lowest projected costs over a 15-year period. An implementation plan is outlined to revise compact substation designs and procurement processes to transition to the SF6 RMUs from Saudi Lucy.
Cost Forecast Report
This document provides a project forecast report for the District Cooling Plant for Rihan Heights project. Key details include:
- The project involves designing, constructing, and commissioning a district cooling plant and network.
- The original completion date was delayed by over 200 days due to various client-directed extensions of time for issues including delays obtaining site access and utility connections.
- The forecast completion date is now December 6, 2011.
- The report provides an analysis of project costs, revenues, variances from budget, and risk assessment for worst, most probable, and best case scenarios.
IRJET- Design and Analysis of Catalytic Converter of Automobile Engine
This document summarizes a study on the design and analysis of a catalytic converter for an automobile engine. The researchers designed a baseline catalytic converter model using CAD software and analyzed it using computational fluid dynamics (CFD) to study the pressure and velocity distribution. They found high pressure losses and non-uniform flow distribution. Various modifications to the honeycomb structure diameter, thickness, and position as well as the inlet and outlet design were tested. The optimal design was found to have a centered inlet, conical inlets/outlets, and a honeycomb structure with 30mm holes positioned at the casing mid-length. This design showed improved uniform flow distribution and reduced pressure losses compared to the baseline design.
Caterpillar cat d5 b track tractor (prefix 46x) service repair manual (46x007...
The document provides instructions for removing and installing the fuel priming pump on a Caterpillar D5B track-type tractor. The removal procedure involves turning off the fuel supply, removing bolts and disconnecting tubes to detach the pump. Installation is the reverse of removal, and includes checking and replacing gaskets if needed. Safety notices are provided to keep parts clean and contain fluids.
Prebid-Part-1-C.pdf
The document is the minutes from a pre-bid meeting held on July 30, 2014 for the diversion of 1200mm and 600mm diameter water supply lines at the Metro Line-3 Car Depot in Aarey Colony, Goregaon. It includes questions and responses from bidders on various clauses in the tender document. Key points discussed include allowing physically completed work for qualification criteria, recognizing experience of working as a sub-contractor, allowing joint ventures, provisions for mobilization advance and security deposit refund. An addendum was issued to modify some of the technical qualification criteria and tender submission requirements. A joint site visit was also arranged on August 12, 2014 to help bidders better understand the project alignment.
QA/AC SUPERVISOR ELECTRICAL & INSTRUMENT
Responsibilities: E&I QA/QC
Responsibilities for Field Inspection as per Inspection Testing Plan (ITP’s) Related (E&I)
Jobs.QA/QC with the help of specification, drawings.
Inspection for Material Receiving related Electrical, Instrument as per Indent, Delivery
Note.
Inspection for Cable Laying (E & I) in Cable Trays, Trenches as per cross-sectional
drawings.
Inspection for Cable Trays (E&I) Installation (Perforated, Ladder, Mesh) as per drawing.
Responsible for all Red Marks/As Built drawing as per site modification.
Inspection for Lighting Installation as per circuit diagram, Panel Installation,Transformer
installation.
Inspection for Heating Tracing cables and Testing.
Having Good Knowledge of (NEC) National Electrical Code.
American Petroleum Institute (API ) Standards
IEC- international ELECTROTECHNICAL Commission Standards.
Inspection for the Installation of MCT’s.
Inspection for Lightning Protection (Lightning Arresters).
Inspection for EARTHING Cable Laying, CAD Weld - Exothermic Weld joints,
Earth Bus Bar, EARTHING Test.
Inspection for Motor Installation, Resistance/IR test & Motor torque test.
Inspection for Cable Continuity/IR, Cable termination, EARTHING test.
Prepare the NCR, CAR, TQ, ITP, and Method Statements & RFI’S.
Complete QA/QC Documentation as per Project specification.
Inspection for calibration of PI, PDIT, PT, TT, TE, FT, LT.
Functional Test of Ultrasonic Transmitters, LSL, LSH, LSHH, AT.
Inspection for Field Instrument Installation (PT,FT, LT, Control Valves as per Hook up drawing)
Inspection for Impulse Line Leak test.
Inspection for JB’S Installation, Panels, Cabinets Installation.
Preparing the complete Loop Folders like(DI,DO,AI,AO,RTD for Loop Checking Pre-
Commissioning with the attachments of Instrument loop package index, Functional loop test CR,
Material Receiving Calibration CR, Instrument Installation CR Instrument index, instrument Loop
Diagram & P& ID’S.
Responsible for clear the Punch Points.
Prepare the Final Dossier as per client HOS and Hand over to Mechanical Completion
Department (MC)
Final Walk Down of Hand over System (HOS) with Client.
Aircriaf turbin Engine Reliability and Inspection Investigations.pdf
This study analyzed reliability data for the JT9D, CF6, and PT6 engines over a 36-month period from 1988 to 1991. Controls and accessories were found to account for the largest percentage of in-flight shutdowns across all three engine types. For the JT9D engine, fuel controls and vanes were particular problem areas. Bearings and compressor blades also exhibited reliability issues. Nondestructive inspection procedures were developed for detecting cracks in the JT9D diffuser case and cracks/corrosion in the CF6 turbine mid-frame and compressor rear frame cases.
Caterpillar cat d5 b track tractor (prefix 46x) service repair manual (46x007...
The document provides instructions for removing and installing the fuel priming pump on a Caterpillar D5B track-type tractor. It describes disconnecting fuel lines, removing mounting bolts and base, and reversing the steps to install a new or repaired pump. Similarly, it outlines removing and installing the fuel filter base, removing the fuel transfer pump, and disassembling the fuel transfer pump. Proper cleanup and containment of fluids is emphasized.
Msedcl aar 2018-19
The document provides an executive summary and progress report for the Annual Administration Report for FY 2018-19 of MSEDC Ltd. Some key details include:
- 225 new substations were commissioned in 2018-19 adding 1585 MVA of capacity. 2020 km of 33kV and 22kV transmission lines were also energized.
- System improvement schemes helped reduce distribution losses by adding new substations. Advanced meters were also installed to reduce commercial losses.
- Under R-APDRP and IPDS schemes, strengthening of distribution networks was undertaken across urban areas to reduce losses and ensure 24/7 power supply.
Business partnership opportunity in defense shipbuilding for sme and sc st ci...
Presentation done at CII West meet on MSME meet Dec 17 @ Taj Mumbai India on opportunity for Startups / SC &SY /SMEs in Defense Shipbuilding
Report for po no 7400005491.docx
1. The delivery date for the process water clean-up unit and associated equipment has slipped from December 25, 2023 to January 19, 2024 due to delays in finalizing engineering documents and obtaining approvals.
2. Actions required to expedite the project include expediting approval of outstanding documents, visiting the vendor facility to understand bottlenecks, and following up intensely with sub-vendors to meet delivery dates.
3. A conclusion is provided that delivery from the major vendor is constrained by delivery from its sub-vendor, Flowserve, requiring close follow-up to minimize further delays.
JIMIT JOSHI RESUME & COVER LETTER
Jimit Abhay Joshi is applying for the position of Aircraft Maintenance Technician/Mechanic with the company. He has 5 years and 5 months of experience working as a technician on AgustaWestland 139, Bell 412 and AS365 N3 helicopters, performing inspections, maintenance, and repairs on airframes and engines. He has the necessary qualifications including a BAMEC from DGCA in aircraft maintenance. He believes he is qualified for the role based on his education, experience, and technical skills working on helicopters.
Schematics huawei honor U8960.pdf
This document contains schematics for various components of a smartphone including:
1. Circuit diagrams for the Qualcomm MSM8960 processor showing connections for GPIO pins, JTAG interface, USB, audio, camera, sensors and more.
2. Schematic for the LPDDR2 RAM interface showing signals to and from the memory chips.
3. Diagrams for components like the PM8921 power management chip, audio codec, RF modules and other peripherals connected to the MSM8960 processor.
Gs
This document contains a customized flight segment from London to Copenhagen with additional contact and booking details transferred from the SpeedFares system. It includes outbound and homebound flight segments, ticketing dates, fare amounts, additional passenger contacts, credit card information, and mail/account details for the booking.
State work
This document is the final report for the proposed Anambra State Airport in Nigeria. It provides analysis and recommendations across several areas:
1. Traffic forecasting estimates total passenger and cargo demand reaching over 800,000 passengers per year by 2030 based on analysis of Anambra State's economy and population growth, regional air traffic trends, and benchmarks from comparable airports.
2. The master plan recommends a phased development including an initial 3,000 meter runway sufficient for domestic traffic, later expanding to 3,500 meters for international flights. It also outlines a airfield, taxiway and apron designs to meet Nigerian aviation standards.
3. An environmental review assesses potential impacts and mitigation measures
Cnc
The document is a seminar presentation on CNC machines submitted by Akash Kumar to his professor. It discusses the introduction of CNC machines and their development over time. It then covers the main types of CNC machines, how they work through programming codes, their features, programming format, advantages like reduced errors and complex geometries, disadvantages like high costs, and concludes CNC machines are efficient for large-scale manufacturing.
Project report
The document provides a project report for MM Aqua Technologies Ltd's investment plan for 2014-15 and 2015-16. Key points:
- MM Aqua aims to invest Rs. 20.53 crore to enhance production capacity and develop new products through installing a 4-roll calender line, vacuum forming machine, test cooling tower, and automated cutting system.
- The power, refinery, and water treatment industries in India are expected to grow significantly in the coming years, increasing demand for MM Aqua's cooling tower components and products.
- The investment plan aims to allow MM Aqua to manufacture new product designs internally and boost production capacity to better capture market opportunities and compete against new international competitors entering
Similar to Knks#312 (20)
IRJET- Design and Analysis of Catalytic Converter of Automobile Engine
IRJET- Design and Analysis of Catalytic Converter of Automobile Engine
Caterpillar cat d5 b track tractor (prefix 46x) service repair manual (46x007...
Caterpillar cat d5 b track tractor (prefix 46x) service repair manual (46x007...
Aircriaf turbin Engine Reliability and Inspection Investigations.pdf
Aircriaf turbin Engine Reliability and Inspection Investigations.pdf
Caterpillar cat d5 b track tractor (prefix 46x) service repair manual (46x007...
Caterpillar cat d5 b track tractor (prefix 46x) service repair manual (46x007...
Business partnership opportunity in defense shipbuilding for sme and sc st ci...
Business partnership opportunity in defense shipbuilding for sme and sc st ci...
Recently uploaded
Resumes, Cover Letters, and Applying Online
This webinar showcases resume styles and the elements that go into building your resume. Every job application requires unique skills, and this session will show you how to improve your resume to match the jobs to which you are applying. Additionally, we will discuss cover letters and learn about ideas to include. Every job application requires unique skills so learn ways to give you the best chance of success when applying for a new position. Learn how to take advantage of all the features when uploading a job application to a company’s applicant tracking system.
Jill Pizzola's Tenure as Senior Talent Acquisition Partner at THOMSON REUTERS...
Jill Pizzola's tenure as Senior Talent Acquisition Partner at THOMSON REUTERS in Marlton, New Jersey, from 2018 to 2023, was marked by innovation and excellence.
一比一原版(SFU毕业证)西蒙弗雷泽大学毕业证如何办理
SFU硕士毕业证成绩单【微信95270640】《西蒙弗雷泽大学毕业证书原版制作SFU成绩单》【Q微信95270640】《仿制SFU毕业证成绩单西蒙弗雷泽大学学位证书pdf电子图》，A.为什么留学生需要操作留信认证?
留信认证全称全国留学生信息服务网认证,隶属于北京中科院。①留信认证门槛条件更低,费用更美丽,并且包过,完单周期短,效率高②留信认证虽然不能去国企,但是一般的公司都没有问题,因为国内很多公司连基本的留学生学历认证都不了解。这对于留学生来说,这就比自己光拿一个证书更有说服力,因为留学学历可以在留信网站上进行查询!
B.为什么我们提供的毕业证成绩单具有使用价值？
查询留服认证是国内鉴别留学生海外学历的唯一途径，但认证只是个体行为，不是所有留学生都操作，所以没有办理认证的留学生的学历在国内也是查询不到的，他们也仅仅只有一张文凭。所以这时候我们提供的和学校颁发的一模一样的毕业证成绩单，就有了使用价值。
实体公司，专业可靠，办理加拿大毕业证|办美国成绩单|做德国文凭学历认证|办新西兰学位证，办澳洲文凭认证，办留信网认证（网上可查，实体公司，专业可靠）铸就十年品质！信誉！实体公司！
[留学文凭学历认证(留信认证使馆认证)西蒙弗雷泽大学毕业证成绩单毕业证证书大学Offer请假条成绩单语言证书国际回国人员证明高仿教育部认证申请学校等一切高仿或者真实可查认证服务。
多年留学服务公司,拥有海外样板无数能完美1:1还原海外各国大学degreeDiplomaTranscripts等毕业材料。海外大学毕业材料都有哪些工艺呢？工艺难度主要由：烫金.钢印.底纹.水印.防伪光标.热敏防伪等等组成。而且我们每天都在更新海外文凭的样板以求所有同学都能享受到完美的品质服务。
国外毕业证学位证成绩单办理方法：
1客户提供办理西蒙弗雷泽大学西蒙弗雷泽大学毕业证假文凭信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）
— — — — 我们是挂科和未毕业同学们的福音我们是实体公司精益求精的工艺！ — — — -
一真实留信认证的作用(私企外企荣誉的见证):
1：该专业认证可证明留学生真实留学身份同时对留学生所学专业等级给予评定。
2：国家专业人才认证中心颁发入库证书这个入网证书并且可以归档到地方。
3：凡是获得留信网入网的信息将会逐步更新到个人身份内将在公安部网内查询个人身份证信息后同步读取人才网入库信息。
4：个人职称评审加20分个人信誉贷款加10分。
5：在国家人才网主办的全国网络招聘大会中纳入资料供国家500强等高端企业选择人才。娃没到过没资格跟小伙伴们争论在山娃的记忆深处只有过年时父亲才会在家呆上三五天无奈相聚的时光总是太短太匆忙记得今年正月就在父亲扛起蛇皮袋将要跨出门槛的一刹那山娃突然抱紧父亲的大腿嚎啕大哭父亲吃力地掰开山娃的手哽咽道山娃好好听话好好念书到了暑假爸也接你进城爸的城好远好大好美山娃于是天天扳着手指算计着读书也格外刻苦无奈时间总过得太慢太慢每次父亲往家打电话山娃总抢着接听一个劲地提醒父亲别忘了正月说的话电涌
5 Common Mistakes to Avoid During the Job Application Process.pdf
The journey toward landing your dream job can be both exhilarating and nerve-wracking. As you navigate through the intricate web of job applications, interviews, and follow-ups, it’s crucial to steer clear of common pitfalls that could hinder your chances. Let’s delve into some of the most frequent mistakes applicants make during the job application process and explore how you can sidestep them. Plus, we’ll highlight how Alliance Job Search can enhance your local job hunt.
一比一原版(QU毕业证)皇后大学毕业证如何办理
QU本科毕业证成绩单【微信95270640】办理皇后大学毕业证原版一模一样、QU毕业证制作【Q微信95270640】《皇后大学毕业证购买流程》《QU成绩单制作》皇后大学毕业证书QU毕业证文凭皇后大学
本科毕业证书,学历学位认证如何办理【留学国外学位学历认证、毕业证、成绩单、大学Offer、雅思托福代考、语言证书、学生卡、高仿教育部认证等一切高仿或者真实可查认证服务】代办国外（海外）英国、加拿大、美国、新西兰、澳大利亚、新西兰等国外各大学毕业证、文凭学历证书、成绩单、学历学位认证真实可查。
【实体公司】办皇后大学皇后大学本科毕业证成绩单学历认证学位证文凭认证办留信网认证办留服认证办教育部认证（网上可查实体公司专业可靠）
— — — 留学归国服务中心 — — -
【主营项目】
一.皇后大学毕业证成绩单使馆认证教育部认证成绩单等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
国外毕业证学位证成绩单办理流程：
1客户提供皇后大学皇后大学本科毕业证成绩单办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）。
专业服务请勿犹豫联系我！本公司是留学创业和海归创业者们的桥梁。一次办理终生受用一步到位高效服务。详情请在线咨询办理,欢迎有诚意办理的客户咨询!洽谈。
招聘代理：本公司诚聘英国加拿大澳洲新西兰美国法国德国新加坡各地代理人员如果你有业余时间有兴趣就请联系我们咨询顾问：+微信:95270640开始山娃就知道父亲的家和工地共有一个很动听的名字——天河工地的底层空空荡荡很宽阔很凉爽在地上铺上报纸和水泥袋父亲和工人们中午全睡在地上地面坑坑洼洼山娃曾多次绊倒过也曾有长铁钉穿透凉鞋刺在脚板上但山娃不怕工地上也常有五六个从乡下来的小学生他们的父母亲也是高楼上的建筑工人小伙伴来自不同省份都操着带有浓重口音的普通话可不知为啥山娃不仅很快与他们熟识起来还成了无话不谈的好朋友可惜快乐的时光总是太短太匆忙吹
一比一原版(UVic毕业证)维多利亚大学毕业证如何办理
UVic毕业证成绩单【微信95270640】《如何办理UVic毕业证维多利亚大学文凭学历》【Q微信95270640】《维多利亚大学文凭学历证书》《维多利亚大学毕业证书与成绩单样本图片》毕业证书补办 Fake Degree做学费单《毕业证明信-推荐信》成绩单，录取通知书，Offer，在读证明，雅思托福成绩单，真实大使馆教育部认证，回国人员证明，留信网认证。网上存档永久可查！
如果您是以下情况，我们都能竭诚为您解决实际问题：【公司采用定金+余款的付款流程，以最大化保障您的利益，让您放心无忧】
1、在校期间，因各种原因未能顺利毕业，拿不到官方毕业证+微信95270640
2、面对父母的压力，希望尽快拿到维多利亚大学维多利亚大学毕业证成绩单；
3、不清楚流程以及材料该如何准备维多利亚大学维多利亚大学毕业证成绩单；
4、回国时间很长，忘记办理；
5、回国马上就要找工作，办给用人单位看；
6、企事业单位必须要求办理的；
面向美国乔治城大学毕业留学生提供以下服务:
【★维多利亚大学维多利亚大学毕业证成绩单毕业证、成绩单等全套材料，从防伪到印刷，从水印到钢印烫金，与学校100%相同】
【★真实使馆认证（留学人员回国证明），使馆存档可通过大使馆查询确认】
【★真实教育部认证，教育部存档，教育部留服网站可查】
【★真实留信认证，留信网入库存档，可查维多利亚大学维多利亚大学毕业证成绩单】
我们从事工作十余年的有着丰富经验的业务顾问，熟悉海外各国大学的学制及教育体系，并且以挂科生解决毕业材料不全问题为基础，为客户量身定制1对1方案，未能毕业的回国留学生成功搭建回国顺利发展所需的桥梁。我们一直努力以高品质的教育为起点，以诚信、专业、高效、创新作为一切的行动宗旨，始终把“诚信为主、质量为本、客户第一”作为我们全部工作的出发点和归宿点。同时为海内外留学生提供大学毕业证购买、补办成绩单及各类分数修改等服务；归国认证方面，提供《留信网入库》申请、《国外学历学位认证》申请以及真实学籍办理等服务，帮助众多莘莘学子实现了一个又一个梦想。
专业服务，请勿犹豫联系我
如果您真实毕业回国，对于学历认证无从下手，请联系我，我们免费帮您递交
诚招代理：本公司诚聘当地代理人员，如果你有业余时间，或者你有同学朋友需要，有兴趣就请联系我
你赢我赢，共创双赢
你做代理，可以帮助维多利亚大学同学朋友
你做代理，可以拯救维多利亚大学失足青年
你做代理，可以挽救维多利亚大学一个个人才
你做代理，你将是别人人生维多利亚大学的转折点
你做代理，可以改变自己，改变他人，给他人和自己一个机会嘿的笑连连说记得记得但别忘了拿奖状进城啊考试一结束山娃就迫不及待地给父亲挂电话：爸我拿奖了三好学生接我进城吧父亲果然没有食言第二天就请假回家接山娃离开爷爷奶奶的那一刻山娃又伤心得泪如雨下宛如军人奔赴前线般难舍和悲壮卧空调大巴挤长蛇列车山娃发现车上挤满了叽叽喳喳的同龄人皆一脸惊喜地四处瞅山娃不认识他们也无暇去套近乎一味地跟着父亲昼夜兼程第二天凌晨就辗转到了父亲的城哇父亲的城真的好大好美哟走出广州火父
原版制作(RMIT毕业证书)墨尔本皇家理工大学毕业证在读证明一模一样
学校原件一模一样【微信：741003700 】《(RMIT毕业证书)墨尔本皇家理工大学毕业证在读证明》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Job Finding Apps Everything You Need to Know in 2024
SnapJob is revolutionizing the way people connect with work opportunities and find talented professionals for their projects. Find your dream job with ease using the best job finding apps. Discover top-rated apps that connect you with employers, provide personalized job recommendations, and streamline the application process. Explore features, ratings, and reviews to find the app that suits your needs and helps you land your next opportunity.
一比一原版布拉德福德大学毕业证（bradford毕业证）如何办理
一模一样【微信：A575476】【布拉德福德大学毕业证（bradford毕业证）成绩单Offer】【微信：A575476】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：A575476】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：A575476】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
官方认证美国旧金山州立大学毕业证学位证书案例原版一模一样
原版一模一样【微信：741003700 】【美国旧金山州立大学毕业证学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
A Guide to a Winning Interview June 2024
This webinar is an in-depth review of the interview process. Preparation is a key element to acing an interview. Learn the best approaches from the initial phone screen to the face-to-face meeting with the hiring manager. You will hear great answers to several standard questions, including the dreaded “Tell Me About Yourself”.
一比一原版(YU毕业证)约克大学毕业证如何办理
YU毕业证文凭证书【微信95270640】（约克大学毕业证高仿学位证书((+《Q微信95270640》))）购买YU毕业证修改YU成绩单购买约克大学毕业证办YU文凭办高仿毕业证约克大学毕业证购买修改成绩单挂科退学如何进行学历认证留学退学办毕业证书/ 出国留学无法毕业买毕业证留学被劝退买毕业证（非正常毕业教育部认证咨询） York University
约克大学毕业证成绩单大学Offer代考语言证书高仿教育部认证等一切高仿或者真实可查认证服务。
十年年留学服务公司,拥有海外样板无数能完美1:1还原海外各国大学等毕业材料。
海外大学毕业材料都有哪些工艺呢？凭借多年的制作经验本公司制作1:1原版高度还原约克大学约克大学毕业证学历书工艺由：《激光》《水印》《钢印》《烫金》《底纹》《防伪光标》《热敏防伪》《紫外线》凹凸版uv版等防伪技术一流高精仿度几乎跟学校100%相同！让您绝对满意。而且我们每天都在更新海外文凭的样板以求所有同学都能享受到完美的品质服务。
国外毕业证书学位证书办理流程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）
【公司服务】：我們以质量求生存诚信为主质量为本客戶为先解您所忧专业的团队咨询顾问为您细心解答可详谈是真是假眼见为实让您真正放心平凡人生,尽我所能助您一臂之力让我們携手圆您梦想!无奈争来争去谁也说服不了谁只是吵个不休山娃听了一脸的羡慕和神往山娃早听父亲说过父亲的城很遥远得坐一天一夜的火车山娃没到过没资格跟小伙伴们争论在山娃的记忆深处只有过年时父亲才会在家呆上三五天无奈相聚的时光总是太短太匆忙记得今年正月就在父亲扛起蛇皮袋将要跨出门槛的一刹那山娃突然抱紧父亲的大腿嚎啕大哭父亲吃力地掰开山娃的手哽咽道山娃好好听话好好念书到了暑假爸也接你进城爸的城好远好大好美山娃于是天天扳着碌
在线制作加拿大萨省大学毕业证文凭证书实拍图原版一模一样
原版一模一样【微信：741003700 】【加拿大萨省大学毕业证文凭证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
一比一原版(UBC毕业证)不列颠哥伦比亚大学毕业证如何办理
UBC硕士学位证成绩单【微信95270640】办理UBC毕业证【Q微信95270640】不列颠哥伦比亚大学毕业证书原版↑制作不列颠哥伦比亚大学学历认证文凭办理不列颠哥伦比亚大学留信网认证,留学回国办理毕业证成绩单文凭学历认证【Q微信95270640】专业为海外学子办理毕业证成绩单、文凭制作，学历仿制，回国人员证明、做文凭，研究生、本科、硕士学历认证、留信认证、结业证、学位证书样本、美国教育部认证百分百真实存档可查】
【实体公司】办不列颠哥伦比亚大学不列颠哥伦比亚大学毕业证成绩单学历认证学位证文凭认证办留信网认证办留服认证办教育部认证（网上可查实体公司专业可靠）
— — — 留学归国服务中心 — — -
【主营项目】
一.不列颠哥伦比亚大学毕业证成绩单使馆认证教育部认证成绩单等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
国外毕业证学位证成绩单办理流程：
1客户提供不列颠哥伦比亚大学不列颠哥伦比亚大学毕业证成绩单办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）。
专业服务请勿犹豫联系我！本公司是留学创业和海归创业者们的桥梁。一次办理终生受用一步到位高效服务。详情请在线咨询办理,欢迎有诚意办理的客户咨询!洽谈。
招聘代理：本公司诚聘英国加拿大澳洲新西兰美国法国德国新加坡各地代理人员如果你有业余时间有兴趣就请联系我们咨询顾问：+微信:95270640伟大了居然能单匹马地跑到这么远这么大这么美的地方赚大钱高楼大厦鳞次栉比大街小巷人潮涌动山娃一路张望一路惊叹他发现城里的桥居然层层叠叠扭来扭去桥下没水却有着水一般的车水马龙山娃惊诧于城里的公交车那么大那么美不用买票乖乖地掷下二枚硬币空调享受还能坐着看电视呢屡经辗转山娃终于跟着父亲到家了山娃没想到父亲城里的家会如此寒碜更没料到父亲的城里竟有如此简陋的鬼地方父亲的家在高楼最底屋最下面很矮很黑是很不显各
Recently uploaded (20)
Jill Pizzola's Tenure as Senior Talent Acquisition Partner at THOMSON REUTERS...
Jill Pizzola's Tenure as Senior Talent Acquisition Partner at THOMSON REUTERS...
5 Common Mistakes to Avoid During the Job Application Process.pdf
5 Common Mistakes to Avoid During the Job Application Process.pdf
Job Finding Apps Everything You Need to Know in 2024
Job Finding Apps Everything You Need to Know in 2024
thyroid case presentation.pptx Kamala's Lakshaman palatial
thyroid case presentation.pptx Kamala's Lakshaman palatial
Status of Women in Pakistan.pptxStatus of Women in Pakistan.pptx
Status of Women in Pakistan.pptxStatus of Women in Pakistan.pptx
Knks#312
- 1. CYPRESS SEMICONDUCTOR CORPORATION Internal Correspondence Date: 8/2/2019 WW: 1931 To: THOR, JBO, MHH, JSO Author: KAUSHIK SHARMA (KNKS) Author File#: KNKS#312 Subject: Automotive Qual Status for New Products – Ww31, 2019 Category: Distribution: Summary: This memo logs the weekly update of the status of new product qualification in the Automotive Biz Unit. Scope: This memo covers projects in the Automotive Biz Unit including TT and PSOC. Project schedule and Executive summary: The table below has the details on the status of the qualification and this will be used by the Automotive team for review and tracking.
- 2. AUTOMOTIVE PROJECT PM ID PM PME PE PKG PKG CODE BE SITE Schedule NPP PR1 PR2 PR3 ES100 PR4 PR5 OS 1401 1401 1401 1439 1432 1432 1445 CS 1401C 1401C 1401C 1439C 1601C 1741C 1952 64 TQFP 48 TQFP ASE-KH OS 1438 1440 1444 1448 1544 1550 1539 56 QFN AMKOR CS 1438C 1441C 1445C 1521C 1638C 1926C 1952 28 SSOP AMKOR OS 1709 1709 1709 1730 1741 1743 1818 24 WQFN ASE-KH CS 1709C 1709C 1709C 1741C 1816C 1832C 1952 OS 1748 1748 1748 1802 1851 1902 1904 CS 1748C 1748C 1748C 1806C 1851C 1910C 1952 OS 1927 1927 1927 1939 1952 1952 2013 CS 1927C 1927C 1927C 1939 1952 1952 2013 OS 1817 1817 1817 1826 1837 1839 1852 CS 1817C 1817C 1817C 1904C 1919C 1926C 1952 RODP JSO 28 SSOP CML AUTOLINE PSOC4A-M 101643 KNKS SNPR NJF, AJCM JSO PSOC4A 92869 KNKS SNPR VMAD, JBO JSO PSOC4A-S1 128423 KNKS SNPR VAU, JBO JSO, RODP 28 SSOP CML AUTOLINE PSOC4A-S1 121324 KNKS SNPR VMAD, JBO ASE-KH 40WQFN ASE-KH PSOC4A-S3 128444 KNKS SNPR VMAD, JBO JSO 64 TQFP PSOC4A-S3 128443 KNKS SNPR VMAD, JBO Qualification Status: 1) AUTOMOTIVE PSoC4A [PM ID: 92869]: - o PR5 CLOSURE – WW52, 2019 I. GOT THE APPROVAL FROM MFRB TO CLOSE PR5 WITH ONLY F25 MATERIAL II. PR5 IS GATED BY – PDR5, TEST YIELD & DIE PRICE AGREEMENT FROM FAB AND CML) o PTN # 191603 ISSUED FOR DISCONTINUATION OF SW FAB
- 3. o STILL AWAITING FEEDBACK FROM LEAD CUSTOMER PANASONIC ON THE PTN # 191603 o MFG COST USING SW IS $0.59 & F25 DIE IS $0.38 2) AUTOMOTIVE PSoC4A-M [PM ID: 101643]: - o PR5 CLOSURE – WW52, 2019 & PR5 IS GATED BY THE FOLLOWING, I. BIRD (48H to 12H): BI FIRMWARE UPDATE + BACK END TEST PROGRAM RELEASE II. PDR5, TEST YIELD & DIE PRICE AGREEMENT FROM FAB AND CML) o HSTO-1234 - FULL CLOSURE MEMO - QTP#184912 - AUTOMOTIVE NEW PACKAGE QUALIFICATION FOR PSOC4A-M TQFP48/64 USING AU WIRE IN ASEK o HSTO-1229 - FULL CLOSURE MEMO -QTP#162707-QUALIFICATION OF PSOC4A-M DEVICE IN FAB25 S8 TECHNOLOGY (S8PFHD-10P) 3) AUTOMOTIVE PSoC4A-S1 [PM ID: 121324]: - o PR5 GATING ITEMS: I. YIELD AND DIE PRICE AGREEMENT FROM FAB II. NQPRM & MFG QTP III. PR5 CLOSURE = WW39, 2019 4) AUTOMOTIVE PSoC4A-S1/28SSOP IN CML AUTO LINES [NO PM PROJECT]: - Owners: RODP, JBO o PDR3 = RODP-848 o HSTO-1259 FULL CLOSURE MEMO - QTP#184203 - PSOC4A-S1 AUTOMOTIVE SSOP 28L QUALIFICATION o PDR5, MFG QTP, NQPRM =TBD (TENTATIVE = WW39, 2019) 5) AUTOMOTIVE PSoC4A-S2 [PM ID: 117363]: - Owners: VMAD, JBO o PR5 GATING ITEMS: (TENTATIVE = WW39, 2019)
- 4. I. ISSUE PCN FOR CHANGE IN TEST/BI SITE FROM ASE-K TO CML FOR 40WQFN II. PR5 SCORECARD DELIVERABLES AND MFRB 6) AUTOMOTIVE PSoC4A-S3/64TQFP [PM ID: 128444]: - Owners: VMAD, JBO o HSTO-1273 – FULL CLOSURE MEMO - QTP#182608 - QUALIFY AUTOMOTIVE PSOC4A-S3 TQFP64 10X10 USING CUPDAU WIRE IN ASEKH-TAIWAN o HSTO-1275 – FULL CLOSURE MEMO - QTP#183101 - PSOC4A-S3 AUTOMOTIVE DEVICE QUAL o E-GRADE QUAL: QTP#: QUAL TIMELINES: o PR5 GATING ITEMS: (TENTATIVE = 4Q, 2019) i. GOOBI (12 to 0H) – 4Q, 2019 [VMAD-567 HAS MORE DETAILS] ii. YIELD AND DIE PRICE AGREEMENT FROM FAB iii. NQPRM & MFG QTP iv. PR5 SCORECARD DELIVERABLES AND MFRB 7) AUTOMOTIVE PSoC4A-S3/40QFN [PM ID: 128443]: - Owners: VMAD, JOVS o MFRB APPROVAL MEMO - CCW-2647 o PDR3 CLOSURE: JSO-1438 o QTP CLOSURE: WW46, 2019 8) CML PRE-MOLDED WETTABLE FLANK QFN FOR AUTOMOTIVE PRODUCTS: [NO PM PROJECT]: - Owners: RELL, MIBA, AWP o ENGINEERING CAPABILITY ASSESSMENT REPORT – WW33 o LAUNCH QTP FOR COMPLETING PACKAGE QUAL – WW46
- 5. o MIBA-976 – CML PRE-MOLDED WETTABLE FLANK QFN FOR AUTOMOTIVE UPDATE 9) TSG_4 FAB TRANSFER (SW to F25): [NO PM PROJECT]: - Owners: NJF, RWEL, VAU o QTP CLOSURE IS GATED ONLY BY CHAR REPORT o CHAR PLAN & CLOSURE TIMELINE: VSD-327 & WW36.5 o QTP & PCN TIMELINE: WW37, 2019 10)TSG7_L (100TQFP) [PPP PROJECT PM ID: 136845]: - o PROJECT IS ON-HOLD (EFO-355 HAS MORE DETAILS) ========================== END OF MEMO ==========================
- 6. o MIBA-976 – CML PRE-MOLDED WETTABLE FLANK QFN FOR AUTOMOTIVE UPDATE 9) TSG_4 FAB TRANSFER (SW to F25): [NO PM PROJECT]: - Owners: NJF, RWEL, VAU o QTP CLOSURE IS GATED ONLY BY CHAR REPORT o CHAR PLAN & CLOSURE TIMELINE: VSD-327 & WW36.5 o QTP & PCN TIMELINE: WW37, 2019 10)TSG7_L (100TQFP) [PPP PROJECT PM ID: 136845]: - o PROJECT IS ON-HOLD (EFO-355 HAS MORE DETAILS) ========================== END OF MEMO ==========================