This document provides instructions for using a manual that calculates standard operation times for servicing jobs on tractors. It explains that the standard times are based on an average mechanic working in a properly equipped workshop. The manual includes job codes, illustrations, and definitions of terms like remove and reinstall that are used to determine standard times. Conditions excluded from warranty coverage are also outlined.
KOBELCO 230SRLC-3 Tier 4 HYDRAULIC EXCAVATOR Service Repair Manual.pdfuac449075
The document is a service manual that provides instructions for maintaining and repairing a Kobelco 230SRLC-3 hydraulic excavator. It contains 7 sections covering specifications, maintenance, systems, disassembly, troubleshooting, engine procedures, and installing optional attachments. The manual provides safety information and cautions to follow when working on the excavator. It also notes the document may need revisions if products or specifications change and some content may differ by country.
KOBELCO 140SRLC-3 HYDRAULIC EXCAVATOR Service Repair Manual.pdfuac449075
This document is a service manual that provides instructions for maintenance, repair, and troubleshooting of a Kobelco 140SRLC-3 hydraulic excavator. It contains 7 sections: Specifications, Maintenance, Systems, Disassembly, Troubleshooting, Engine, and Optional Attachment Installation Procedures. The Outline section emphasizes safety precautions and preparation needed before disassembling the excavator. Technicians are instructed to clean the machine, record inspection details, arrange the work area, and wear proper protective equipment. Lifting heavy components requires assistance to avoid injury.
KOBELCO 80CS-2 ACERA HYDRAULIC EXCAVATOR Service Repair Manual.pdfuac449075
This document is a service manual that provides instructions for maintenance, repair, and troubleshooting of hydraulic excavators. It contains 7 sections: specifications, maintenance, systems, disassembly, troubleshooting, engine, and installation of optional attachments. The outline emphasizes general safety precautions for working on the equipment, including preparing the work area, using proper tools and lifting techniques, relieving hydraulic pressures, and handling electrical components. It also introduces the international system of units used in specifications.
KOBELCO 70SR-2 Acera Hydraulic Excavator Service Repair Manual.pdfuac449075
The document provides instructions for disassembling a pilot valve used on a Kobelco 70SR-2 Acera hydraulic excavator. It includes diagrams of the valve components and specifies tightening torques. The disassembly process involves removing external components like boots and nuts, then internal parts like springs, spools and seals while taking precautions for any stored pressure or tension from springs. Precise tools and careful, even movements are emphasized to safely relieve pressures within the valve.
KOBELCO 17SR-Tier 4 Hydraulic Excavator Service Repair Manual.pdfuac449075
This document provides guidelines and safety precautions for repairing hydraulic excavators. It covers preparing for disassembly, safety during disassembly and assembly, working with hydraulic equipment and electrical components, handling hydraulic parts, welding repairs, and an international unit conversion system. Technicians are instructed to thoroughly read manuals, use proper tools, relieve pressures, and take caution with hot or heavy parts to avoid injury.
Kioti Daedong DK501 Tractor Parts Catalogue Manual.pdfuac449075
This document provides instructions for using a manual that calculates standard operation times for servicing jobs on tractors. It explains that the standard times are based on an average mechanic working in a properly equipped workshop. The manual includes job codes, illustrations, and definitions of terms like remove and reinstall that are used to determine standard times. Conditions excluded from warranty coverage are also outlined.
Kioti Daedong DK451C Tractor Parts Catalogue Manual.pdfuac449075
This manual provides standard operation times for servicing jobs on Daedong tractors. It instructs technicians to use the provided job codes and times when filling out warranty forms. The times are based on average conditions and a mechanic's ability. They include preparation, inspection, disassembly/reassembly, and testing times. The document also provides settings and conditions used to calculate the times along with exclusions from warranty coverage.
Kioti Daedong DK451C Tractor Parts Catalogue Manual 1.pdfuac449075
This document provides instructions for using a manual that calculates standard operation times for servicing jobs on tractors. It explains that the standard times are based on an average mechanic working in a properly equipped workshop. The manual includes job codes, illustrations, and breakdowns of operation times into service time and spare time. It also lists conditions excluded from warranty coverage.
KOBELCO 230SRLC-3 Tier 4 HYDRAULIC EXCAVATOR Service Repair Manual.pdfuac449075
The document is a service manual that provides instructions for maintaining and repairing a Kobelco 230SRLC-3 hydraulic excavator. It contains 7 sections covering specifications, maintenance, systems, disassembly, troubleshooting, engine procedures, and installing optional attachments. The manual provides safety information and cautions to follow when working on the excavator. It also notes the document may need revisions if products or specifications change and some content may differ by country.
KOBELCO 140SRLC-3 HYDRAULIC EXCAVATOR Service Repair Manual.pdfuac449075
This document is a service manual that provides instructions for maintenance, repair, and troubleshooting of a Kobelco 140SRLC-3 hydraulic excavator. It contains 7 sections: Specifications, Maintenance, Systems, Disassembly, Troubleshooting, Engine, and Optional Attachment Installation Procedures. The Outline section emphasizes safety precautions and preparation needed before disassembling the excavator. Technicians are instructed to clean the machine, record inspection details, arrange the work area, and wear proper protective equipment. Lifting heavy components requires assistance to avoid injury.
KOBELCO 80CS-2 ACERA HYDRAULIC EXCAVATOR Service Repair Manual.pdfuac449075
This document is a service manual that provides instructions for maintenance, repair, and troubleshooting of hydraulic excavators. It contains 7 sections: specifications, maintenance, systems, disassembly, troubleshooting, engine, and installation of optional attachments. The outline emphasizes general safety precautions for working on the equipment, including preparing the work area, using proper tools and lifting techniques, relieving hydraulic pressures, and handling electrical components. It also introduces the international system of units used in specifications.
KOBELCO 70SR-2 Acera Hydraulic Excavator Service Repair Manual.pdfuac449075
The document provides instructions for disassembling a pilot valve used on a Kobelco 70SR-2 Acera hydraulic excavator. It includes diagrams of the valve components and specifies tightening torques. The disassembly process involves removing external components like boots and nuts, then internal parts like springs, spools and seals while taking precautions for any stored pressure or tension from springs. Precise tools and careful, even movements are emphasized to safely relieve pressures within the valve.
KOBELCO 17SR-Tier 4 Hydraulic Excavator Service Repair Manual.pdfuac449075
This document provides guidelines and safety precautions for repairing hydraulic excavators. It covers preparing for disassembly, safety during disassembly and assembly, working with hydraulic equipment and electrical components, handling hydraulic parts, welding repairs, and an international unit conversion system. Technicians are instructed to thoroughly read manuals, use proper tools, relieve pressures, and take caution with hot or heavy parts to avoid injury.
Kioti Daedong DK501 Tractor Parts Catalogue Manual.pdfuac449075
This document provides instructions for using a manual that calculates standard operation times for servicing jobs on tractors. It explains that the standard times are based on an average mechanic working in a properly equipped workshop. The manual includes job codes, illustrations, and definitions of terms like remove and reinstall that are used to determine standard times. Conditions excluded from warranty coverage are also outlined.
Kioti Daedong DK451C Tractor Parts Catalogue Manual.pdfuac449075
This manual provides standard operation times for servicing jobs on Daedong tractors. It instructs technicians to use the provided job codes and times when filling out warranty forms. The times are based on average conditions and a mechanic's ability. They include preparation, inspection, disassembly/reassembly, and testing times. The document also provides settings and conditions used to calculate the times along with exclusions from warranty coverage.
Kioti Daedong DK451C Tractor Parts Catalogue Manual 1.pdfuac449075
This document provides instructions for using a manual that calculates standard operation times for servicing jobs on tractors. It explains that the standard times are based on an average mechanic working in a properly equipped workshop. The manual includes job codes, illustrations, and breakdowns of operation times into service time and spare time. It also lists conditions excluded from warranty coverage.
Kioti Daedong DK451 Tractor Parts Catalogue Manual.pdfuac449075
This manual provides standard operation times for servicing jobs on Daedong tractors. It instructs technicians to use the provided job codes and times when filling out warranty forms. The times are based on average conditions and a mechanic's ability. The document also provides settings and conditions used to calculate times, which include spare times added to service times. It excludes times for inspecting special faults. The manual contains over 200 job codes and times for servicing various tractor components and systems.
Kioti Daedong DK451 Tractor Parts Catalogue Manual 1.pdfuac449075
This manual provides standard operation times for servicing jobs on various tractor models. It includes over 100 job codes with descriptions and times for repairs and replacements. Standard times are based on average conditions and mechanic experience. Times include service work as well as preparation and include a 10% buffer. Illustrated exploded diagrams show components.
Kioti Daedong DK45SC Tractor Parts Catalogue Manual 1.pdfuac449075
This document provides instructions for using a manual that calculates standard operation times for servicing jobs on tractors. It explains that the standard times are based on an average mechanic working in a properly equipped workshop. The manual includes job codes, illustrations, and breakdowns of operation times into service time and spare time. It also lists conditions excluded from warranty coverage.
Kioti Daedong DK45S Tractor Parts Catalogue Manual 1.pdfuac449075
This document provides instructions for using a manual that calculates standard operation times for servicing jobs on tractors. It explains that the standard times are based on an average mechanic working in a properly equipped workshop. The manual includes job codes, illustrations, and breakdowns of operation times into service time and spare time. It also lists conditions excluded from warranty coverage.
Kioti Daedong CK30H Tractor Parts Catalogue Manual.pdfuac449075
The document provides instructions and specifications for parts lists for various tractor models. It includes 10 numbered instructions describing the parts list codes and identifiers. The parts lists themselves contain extensive lists of component groups, part numbers, descriptions, quantities and other specifications for different tractor models and countries.
Kioti Daedong CK30 Tractor Parts Catalogue Manual.pdfuac449075
The document provides instructions and specifications for parts lists for various tractor models. It includes 10 numbered instructions describing the parts list codes and identifiers. The parts lists themselves contain extensive lists of component groups, part numbers, descriptions, quantities and other specifications for different tractor models and countries.
Kioti Daedong CK25H Tractor Parts Catalogue Manual.pdfuac449075
This document provides instructions for using a parts list for tractors. It explains that the parts list contains groups, components, reference numbers, part numbers, remarks, serial numbers, interchangeability notes, and specifications that differ by country and model. It also provides information on ordering parts and making repairs using the parts list. The parts list is subject to change without notice due to product improvements.
Kioti Daedong CK25 Tractor Parts Catalogue Manual.pdfuac449075
The document provides instructions and specifications for parts lists for various tractor models. It includes 10 numbered instructions describing the parts list codes and identifiers. The parts lists themselves contain extensive lists of component groups, part numbers, descriptions, quantities and other specifications for different tractor models and countries.
Kawasaki 90Z7B Wheel Loader Service Repair Manual (Serial No. 90C6-5001 and u...uac449075
The document provides guidance on painting surfaces of a wheel loader. It lists common surfaces that should be painted, such as pipes, the cab, plates, and consoles, along with the recommended painting colors, including high grade black and shining silver. Proper painting protects surfaces and provides an attractive, uniform appearance.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Kioti Daedong DK451 Tractor Parts Catalogue Manual.pdfuac449075
This manual provides standard operation times for servicing jobs on Daedong tractors. It instructs technicians to use the provided job codes and times when filling out warranty forms. The times are based on average conditions and a mechanic's ability. The document also provides settings and conditions used to calculate times, which include spare times added to service times. It excludes times for inspecting special faults. The manual contains over 200 job codes and times for servicing various tractor components and systems.
Kioti Daedong DK451 Tractor Parts Catalogue Manual 1.pdfuac449075
This manual provides standard operation times for servicing jobs on various tractor models. It includes over 100 job codes with descriptions and times for repairs and replacements. Standard times are based on average conditions and mechanic experience. Times include service work as well as preparation and include a 10% buffer. Illustrated exploded diagrams show components.
Kioti Daedong DK45SC Tractor Parts Catalogue Manual 1.pdfuac449075
This document provides instructions for using a manual that calculates standard operation times for servicing jobs on tractors. It explains that the standard times are based on an average mechanic working in a properly equipped workshop. The manual includes job codes, illustrations, and breakdowns of operation times into service time and spare time. It also lists conditions excluded from warranty coverage.
Kioti Daedong DK45S Tractor Parts Catalogue Manual 1.pdfuac449075
This document provides instructions for using a manual that calculates standard operation times for servicing jobs on tractors. It explains that the standard times are based on an average mechanic working in a properly equipped workshop. The manual includes job codes, illustrations, and breakdowns of operation times into service time and spare time. It also lists conditions excluded from warranty coverage.
Kioti Daedong CK30H Tractor Parts Catalogue Manual.pdfuac449075
The document provides instructions and specifications for parts lists for various tractor models. It includes 10 numbered instructions describing the parts list codes and identifiers. The parts lists themselves contain extensive lists of component groups, part numbers, descriptions, quantities and other specifications for different tractor models and countries.
Kioti Daedong CK30 Tractor Parts Catalogue Manual.pdfuac449075
The document provides instructions and specifications for parts lists for various tractor models. It includes 10 numbered instructions describing the parts list codes and identifiers. The parts lists themselves contain extensive lists of component groups, part numbers, descriptions, quantities and other specifications for different tractor models and countries.
Kioti Daedong CK25H Tractor Parts Catalogue Manual.pdfuac449075
This document provides instructions for using a parts list for tractors. It explains that the parts list contains groups, components, reference numbers, part numbers, remarks, serial numbers, interchangeability notes, and specifications that differ by country and model. It also provides information on ordering parts and making repairs using the parts list. The parts list is subject to change without notice due to product improvements.
Kioti Daedong CK25 Tractor Parts Catalogue Manual.pdfuac449075
The document provides instructions and specifications for parts lists for various tractor models. It includes 10 numbered instructions describing the parts list codes and identifiers. The parts lists themselves contain extensive lists of component groups, part numbers, descriptions, quantities and other specifications for different tractor models and countries.
Kawasaki 90Z7B Wheel Loader Service Repair Manual (Serial No. 90C6-5001 and u...uac449075
The document provides guidance on painting surfaces of a wheel loader. It lists common surfaces that should be painted, such as pipes, the cab, plates, and consoles, along with the recommended painting colors, including high grade black and shining silver. Proper painting protects surfaces and provides an attractive, uniform appearance.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Kioti Daedong DK501C Tractor Parts Catalogue Manual.pdf
1. INSTRUCTIONS
This manual has been prepared to calculate the standard operation times needed to do individual servicing jobs.
Please make full use of this standard operation time when filling out the claim request forms.
1. Warranty Period
: The service jobs within warranty period are compensated by our company’s warranty agreement.
2. Job Code Number
: Please use the service job codes furnished in this manual when you fill out the warranty request forms.
* Note: Refer to “CLAIM SERVICE MENU” in the DOSS (DAEDONG OVERSEAS SERVICE SYSTEM) program for detail information.
3. Use the Flat Rate Schedule
To help dealers correctly identify the details of service work to be done, the schedule is edited to include exploded illustrations indicating
clearly the points of service and standard operation times. The exploded illustrations are provided with emphasis on DK45S(c),DK451(C),
DK501(C) tractor.
4. Standard Operation Time
The standard operation time is calculated based on some standard operation conditions and the time schedule is based on the service done
by a mechanic with average ability and experience.
5. Standard Operation Time Setting Condition
The time schedule has based on:
1. Use of farm implement service workshop installed by adequate repair condition and facilities.
2. Use of common tools, impacts and special tools.
3. Service done by a mechanic with average ability and experience.
4. Average time calculated after disassembling and servicing executed at three times.
5. Including the time to obtain necessary parts and tools.
6. The standard operation time for jobs requiring two people is listed as the time to be done by one person.
Therefore, the time should not be multiplied by two.
7. The calculating unit for the standard operation time is 6 minutes, one tenth of an hour.
8. Including the actual service time and the spare time.
2. 6. Standard Operation Time Structure
Standard Operation Time = [Service Time] + [Spare Time]
1. Service Time
The time spent by actual service job such as disassemble, assemble, clean, maintenance, measurement or driving test. But the time
spent by inspecting a special fault is excluded.
2. Spare Time
The time required to do job preparation, part transportation or other miscellaneous works for service job.
Spare Time Rate = Spare Time ÷ Service Time
Standard Operation Time = Service Time x (1 + Spare Time Rate)
7. R&R (Remove & Reinstall) Setting Item
: To remove and reinstall the same part or a new part for replacement, R&R items consist as following;
1) R&R includes machine in shop, fluid(s) drainage, removal and placement of the group or subgroup onto a service bed for inspection(s) or
replacement(s), removal from bed, installation, fluid(s) refill, adjustment(s) and operation test, if any.
2) R&R includes disassembly of a single component or group of components from a removed assembly, washing of parts, replacement(s),
if any, reassembly and adjustment(s) and operation tests if necessary.
3) R&R includes substitution of one or more parts from the complete machine or from a removed group, drainage and refilling of various
fluids, if necessary.
4) Disassemble(s) from the removed group, washing, inspection and measurement of components, replacement(s) and reassembly of
damaged parts are excluded.
8. The conditions to be excluded from the Warranty
1) Problem resulted in any natural disaster such as fire, flood and earthquake, etc.
2) Problem resulted in owner’s remodeling or changing the specifications.
3) Using any of non-genuine part.
4) Removal or Installation of farm implements not listed in the standard operation time items.
Due to our developing or improving the products, the information contained herein is subject to change without pre-notice.
INSTRUCTIONS
3. -3 -
TABLE OF CONTENTS
E010 CYLINDER BLOCK GROUP .................................................................................................................................................8
E020 OIL PAN GROUP .................................................................................................................................................................10
E030 CYLINDER HEAD GROUP ..................................................................................................................................................12
E040 GEAR CASE GROUP..........................................................................................................................................................14
E050 MAIN BEARING CASE GROUP ..........................................................................................................................................16
E070 MUFFLER GROUP ..............................................................................................................................................................18
E080 VALVE, ROCKER ARM GROUP .........................................................................................................................................20
E090 CYLINDER HEAD COVER GROUP ...................................................................................................................................22
E100 CAMSHAFT GROUP ............................................................................................................................................................24
E110 PISTON, CRANKSHAFT GROUP .......................................................................................................................................26
E120 FLYWHEEL GROUP ............................................................................................................................................................28
E130 NOZZLE, HOLDER GROUP................................................................................................................................................30
E140 FUEL CAMSHAFT GROUP .................................................................................................................................................32
E150 SPEED CONTROL PLATE GROUP ...................................................................................................................................34
E160 ENGINE STOP LEVER GROUP .........................................................................................................................................36
E170 GOVERNOR GROUP ..........................................................................................................................................................38
E180 WATER PUMP GROUP.......................................................................................................................................................40
E190 WATER PIPE GROUP.........................................................................................................................................................42
E200 DYNAMO GROUP ................................................................................................................................................................44
E220 MANIFOLD GROUP .............................................................................................................................................................46
E225 MANIFOLD GROUP .............................................................................................................................................................48
T100 CLUTCH GROUP .................................................................................................................................................................50
T110 CLUTCH LEVER GROUP ...................................................................................................................................................52
T120 CLUTCH HOUSING GROUP ...............................................................................................................................................54
T130 SHUTTLE GROUP ...............................................................................................................................................................56
T140 REVERSE SHAFT GROUP ................................................................................................................................................58
T150 SHAFT 1 GROUP ................................................................................................................................................................60
4. -4 -
TABLE OF CONTENTS
T160 SHAFT 2 GROUP ................................................................................................................................................................62
T170 AUX. SPEED SYSTEM GROUP .........................................................................................................................................64
T180 PTO DRIVING SHAFT GROUP...........................................................................................................................................66
T190 PTO CLUTCH GROUP .......................................................................................................................................................68
T200 PTO SHAFT GROUP ..........................................................................................................................................................70
T210 FRONT WHEEL DRIVING GROUP ....................................................................................................................................72
T220 SPIRAL BEVEL GEAR GROUP ..........................................................................................................................................76
T230 SHUTTLE FORK LEVER GROUP ......................................................................................................................................78
T240 MAIN CHANGE FORK LEVER GROUP .............................................................................................................................80
T250 HI-LOW FORK LEVER GROUP .........................................................................................................................................82
T270 REAR DIFFERENTIAL SYSTEM GROUP...........................................................................................................................84
T280 DIFFERENTIAL LOCK FORK GROUP ...............................................................................................................................86
T290 BRAKE CASE GROUP .......................................................................................................................................................88
T300 PLANETARY GEAR GROUP ...............................................................................................................................................90
T310 REAR AXLE GROUP ...........................................................................................................................................................92
T320 HYDRAULIC CYLINDER GROUP .......................................................................................................................................94
T321 HYDRAULIC CYLINDER BODY GROUP............................................................................................................................96
T322 HYDRAULIC LIFT ARM GROUP .........................................................................................................................................98
T323 HYDRAULIC LIFT CONTROL GROUP 1..........................................................................................................................100
T324 HYDRAULIC LIFT INNER CONTROL GROUP 2 .............................................................................................................102
T325 TOP LINK BRACKETGROUP ...........................................................................................................................................104
T330 GEAR PUMP GROUP .......................................................................................................................................................106
T340 PTO CLUTCH VALVE GROUP .........................................................................................................................................108
T350 HYDRAULIC TUBE GROUP .............................................................................................................................................. 110
T360 INLET HOSE GROUP ....................................................................................................................................................... 112
T370 OIL INLET PIPE GROUP................................................................................................................................................... 114
T380 OUT HYDRAULIC PIPE GROUP ...................................................................................................................................... 116
5. -5 -
TABLE OF CONTENTS
T385 OUT HYDRAULIC PIPE GROUP ...................................................................................................................................... 118
T390 POWER STEERING GROUP ...........................................................................................................................................120
T400 STEERING HOSE GROUP ...............................................................................................................................................122
T410 STEERING CYLINDER GROUP .......................................................................................................................................124
T415 JOYSTICK VALVE GROUP ...............................................................................................................................................126
T420 FRONT DIFFERENTIAL GEAR CASE GROUP ...............................................................................................................128
T430 FRONT DIFFERENTIAL GROUP ......................................................................................................................................130
T440 BEVEL PINION SHAFT GROUP .......................................................................................................................................132
T450 BEVEL GEAR CASE GROUP ...........................................................................................................................................134
T460 BEVEL GEAR SHAFT GROUP .........................................................................................................................................136
T470 FRONT AXLE CASE GROUP ...........................................................................................................................................138
T480 FRONT AXLE GROUP ......................................................................................................................................................140
T490 FRONT AXLE BRACKET GROUP....................................................................................................................................142
T500 PROPELLER SHAFT GROUP ..........................................................................................................................................144
T530 BATTERY GROUP .............................................................................................................................................................146
T540 ELECTRICAL SYSTEM 1 GROUP ....................................................................................................................................148
T550 ELECTRICAL SYSTEM 2 GROUP ....................................................................................................................................150
T560 ELECTRICAL SYSTEM 3 GROUP ....................................................................................................................................152
T570 FENDER LIGHT GROUP ..................................................................................................................................................154
T580 FRONT AXLE FRAME GROUP.........................................................................................................................................156
T590 AIRCLEANER SUPPORT GROUP ...................................................................................................................................158
T600 BONNET SUPPORT GROUP ...........................................................................................................................................160
T610 BONNET GROUP ..............................................................................................................................................................162
T630 FUEL TANK GROUP..........................................................................................................................................................164
T640 FUEL PIPE GROUP...........................................................................................................................................................166
T650 INSTRUMENT GROUP ......................................................................................................................................................168
T660 LABEL GROUP ..................................................................................................................................................................170
6. -6 -
TABLE OF CONTENTS
T670 CLUTCH PEDAL GROUP .................................................................................................................................................174
T680 BRAKE PEDAL GROUP....................................................................................................................................................176
T690 BRAKE ROD GROUP .......................................................................................................................................................178
T700 ACCELATOR GROUP .......................................................................................................................................................180
T710 MAIN CHANGE LEVER GROUP .......................................................................................................................................182
T720 HI-LOW LEVER GROUP...................................................................................................................................................184
T750 DIFFERENTIAL PEDAL GROUP .......................................................................................................................................186
T760 DOUBLE ACTING LEVER GROUP ..................................................................................................................................188
T765 DOUBLE ACTING LEVER GROUP ..................................................................................................................................190
T770 POSITION, DRAFT CONTROL GROUP ..........................................................................................................................192
T775 POSITION, DRAFT CONTROL GROUP ..........................................................................................................................194
T780 SHUTTLE LEVER GROUP ...............................................................................................................................................196
T785 SHUTTLE LEVER GROUP ...............................................................................................................................................198
T790 HITCH GROUP...................................................................................................................................................................200
T800 LOWER LINK GROUP ......................................................................................................................................................202
T810 CHECK LINK GROUP .......................................................................................................................................................204
T820 TOP LINK GROUP ............................................................................................................................................................206
T830 LIFT ROD GROUP ............................................................................................................................................................208
T870 CABIN SUPPORT GROUP ...............................................................................................................................................210
T880 STEP GROUP....................................................................................................................................................................212
T890 SEAT GROUP ....................................................................................................................................................................214
T895 SUN SHADE FRAME GROUP ..........................................................................................................................................216
T900 ROPS GROUP...................................................................................................................................................................218
T905 CABIN GROUP...................................................................................................................................................................220
T910 AIRCON, HEATER GROUP ..............................................................................................................................................222
T920 FRONT GLASS GROUP ...................................................................................................................................................226
T930 DOOR GROUP ..................................................................................................................................................................228
7. -7 -
TABLE OF CONTENTS
T940 REAR GLASS GROUP......................................................................................................................................................230
T950 ROOF GROUP ..................................................................................................................................................................232
T960 SUN ROOF GROUP .........................................................................................................................................................234
T970 SWITCH GROUP ...............................................................................................................................................................236
T980 CABIN WIRE GROUP .......................................................................................................................................................238
T990 FENDER GROUP ..............................................................................................................................................................240
T991 AIRCLEANER GROUP ......................................................................................................................................................242
T992 MUFFLER GROUP ............................................................................................................................................................244
T993 RADIATOR GROUP ...........................................................................................................................................................246
T994 AIRCON BRACKET GROUP.............................................................................................................................................248
15. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
16. TIME
-15 -
DESCRIPTION REMARK
JOB CODE
DK451C DK501C
DK45Sc DK501
DK451
DK45S
GEAR CASE ASS’Y R & R
O-RING R & R
O-RING R & R
O-RING R & R
SUPPORT, OIL FILTER R & R
GASKET, OIL FILTER SUPPORT R & R
COVER R & R
O-RING R & R
O-RING R & R
GASKET, GEAR CASE R & R
GASKET R & R
FILTER, ENGINE OIL R & R
GASKET R & R
E040001
E040002
E040003
E040004
E040005
E040006
E040007
E040008
E040009
E040010
E040011
E040012
E040013
4.0
4.0
4.0
4.0
1.5
1.5
1.5
1.5
1.5
4.0
0.5
0.5
1.5
4.0
4.0
4.0
4.0
1.5
1.5
1.5
1.5
1.5
4.0
0.5
0.5
1.5
4.0
4.0
4.0
4.0
1.5
1.5
1.5
1.5
1.5
4.0
0.5
0.5
1.5
4.0
4.0
4.0
4.0
1.5
1.5
1.5
1.5
1.5
4.0
0.5
0.5
1.5
4.0
4.0
4.0
4.0
1.5
1.5
1.5
1.5
1.5
4.0
0.5
0.5
1.5
4.0
4.0
4.0
4.0
1.5
1.5
1.5
1.5
1.5
4.0
0.5
0.5
1.5