The document provides an overview of safety precautions for operating a KIOTI DK451/501/551 tractor. Key points include:
- Read the entire owner's manual before operating the tractor. Only properly trained persons should operate it.
- Replace any missing or damaged safety decals and keep decals clean.
- Do not operate the tractor under the influence of drugs or alcohol or while fatigued. Communicate intentions when working with other tractors.
- Never start the engine from the ground and only have the operator ride the tractor unless a passenger seat is installed.
- Use the seat belt if the tractor has a ROPS and cabin installed and never use the seat belt
Mitsubishi fd100 n forklift trucks service repair manual sn:f15d 60011-upjkmsme ekdmm
This document is a service manual that provides instructions for servicing Mitsubishi forklifts. It covers various systems of FD100N, FD120N, FD135N, FD150N and FD160N models, which are powered by a Mitsubishi 6M60-TL diesel engine. The manual emphasizes safety procedures and contains diagrams, specifications, and troubleshooting information to guide maintenance and repairs. Technicians should carefully read all sections relevant to the work being performed.
The document provides information on various electric vehicle models from Maverick including golf carts, carriers, patrol carts and an ambulance. Some key details include:
- The M20 twin seater golf cart and M20L lithium battery golf cart for two passengers.
- Larger vehicles like the M45 four seater golf cart, M65/85 6/8 seater golf cart, and M40/60/80 back-to-back series vehicles.
- Utility vehicles such as the ST20/45 electric carriers, P20 driving ranger, and S110 patrol cart.
- An S120 ambulance conversion that includes a quick release stretcher system.
- Specifications are provided
The document provides information for service procedures on a Moto Guzzi vehicle. Only Moto Guzzi dealers and qualified mechanics should perform maintenance and repairs to ensure it is done correctly. Original spare parts must be used to maintain reliability. The manual describes disassembly and assembly of the gearbox, including removal of shafts, gears, bushings, and bearings. Clearance and wear limits are provided to check components for replacement.
Caterpillar cat gc15 k forklift lift trucks service repair manual sn at81c 00...jksjdmd
This service manual provides instructions for servicing 1-ton to 3-ton internal combustion cushion models of Cat lift trucks. It includes safety warnings and covers maintenance for the Mitsubishi 4G63 and 4G64 gasoline engines. The document lists specifications for various truck models, including dimensions, performance data, and component identification information. Safety precautions are provided to ensure safe repair procedures.
This document provides an owner's manual for an electric golf cart. It includes sections on vehicle features, safety information, pre-operation checks, operating instructions, on-board charging, batteries, tires, modifications, maintenance, storage and specifications. The manual emphasizes performing pre-operation checks of the brakes, tires, lights, signals and controls to ensure safety. It also outlines proper use of the key switch, indicators, dashboard and lights and horn controls during operation. Maintenance sections cover tools, vehicle, chassis, electrical components and storage procedures.
The document provides an overview of the Moto Guzzi V85 TT vehicle. It contains instructions for safe and proper use of the vehicle. Key features described include the dashboard, instrument panel, lighting unit, digital display, switches, buttons and systems such as the immobilizer, ABS and traction control. The document emphasizes safety, including warnings about carbon monoxide, fuel, hot components, and electrical and mechanical hazards.
John Deere 655 755 855 955 756 and 865 Compact Utility Tractor Technical Manu...GregorStark
This technical manual provides service information for John Deere 655, 755, 855, 955, 756 and 856 compact utility tractors. It contains sections on diesel engine repair, fuel and air repair, alternator repair, power train repair, steering and brakes repair, hydraulics repair, and miscellaneous repair. The manual instructs technicians on repair specifications, repair procedures, operational checks, and diagnostics. It is intended to be used alongside other manuals in John Deere's total product support program.
Mitsubishi fd100 n forklift trucks service repair manual sn:f15d 60011-upjkmsme ekdmm
This document is a service manual that provides instructions for servicing Mitsubishi forklifts. It covers various systems of FD100N, FD120N, FD135N, FD150N and FD160N models, which are powered by a Mitsubishi 6M60-TL diesel engine. The manual emphasizes safety procedures and contains diagrams, specifications, and troubleshooting information to guide maintenance and repairs. Technicians should carefully read all sections relevant to the work being performed.
The document provides information on various electric vehicle models from Maverick including golf carts, carriers, patrol carts and an ambulance. Some key details include:
- The M20 twin seater golf cart and M20L lithium battery golf cart for two passengers.
- Larger vehicles like the M45 four seater golf cart, M65/85 6/8 seater golf cart, and M40/60/80 back-to-back series vehicles.
- Utility vehicles such as the ST20/45 electric carriers, P20 driving ranger, and S110 patrol cart.
- An S120 ambulance conversion that includes a quick release stretcher system.
- Specifications are provided
The document provides information for service procedures on a Moto Guzzi vehicle. Only Moto Guzzi dealers and qualified mechanics should perform maintenance and repairs to ensure it is done correctly. Original spare parts must be used to maintain reliability. The manual describes disassembly and assembly of the gearbox, including removal of shafts, gears, bushings, and bearings. Clearance and wear limits are provided to check components for replacement.
Caterpillar cat gc15 k forklift lift trucks service repair manual sn at81c 00...jksjdmd
This service manual provides instructions for servicing 1-ton to 3-ton internal combustion cushion models of Cat lift trucks. It includes safety warnings and covers maintenance for the Mitsubishi 4G63 and 4G64 gasoline engines. The document lists specifications for various truck models, including dimensions, performance data, and component identification information. Safety precautions are provided to ensure safe repair procedures.
This document provides an owner's manual for an electric golf cart. It includes sections on vehicle features, safety information, pre-operation checks, operating instructions, on-board charging, batteries, tires, modifications, maintenance, storage and specifications. The manual emphasizes performing pre-operation checks of the brakes, tires, lights, signals and controls to ensure safety. It also outlines proper use of the key switch, indicators, dashboard and lights and horn controls during operation. Maintenance sections cover tools, vehicle, chassis, electrical components and storage procedures.
The document provides an overview of the Moto Guzzi V85 TT vehicle. It contains instructions for safe and proper use of the vehicle. Key features described include the dashboard, instrument panel, lighting unit, digital display, switches, buttons and systems such as the immobilizer, ABS and traction control. The document emphasizes safety, including warnings about carbon monoxide, fuel, hot components, and electrical and mechanical hazards.
John Deere 655 755 855 955 756 and 865 Compact Utility Tractor Technical Manu...GregorStark
This technical manual provides service information for John Deere 655, 755, 855, 955, 756 and 856 compact utility tractors. It contains sections on diesel engine repair, fuel and air repair, alternator repair, power train repair, steering and brakes repair, hydraulics repair, and miscellaneous repair. The manual instructs technicians on repair specifications, repair procedures, operational checks, and diagnostics. It is intended to be used alongside other manuals in John Deere's total product support program.
This document is an operation and maintenance manual for McCormick tractor models. It contains sections on general information, instruments and controls, operation, maintenance and adjustments, electrical systems, specifications, hitches and implements. The manual provides instructions for identifying the tractor, engine and safety information, operating instructions, maintenance schedules and safety decals. It is intended to instruct owners and users on safe and proper operation and maintenance of the tractors.
This document provides an introduction and overview of McCormick tractors. It discusses McCormick's commitment to quality and reliability. Authorized dealers will inspect new tractors and provide training to ensure customers benefit from their machine. Regular maintenance is important for continued value, operation, and reliability of the tractor. The manual then provides a table of contents outlining the various sections contained within.
Kubota v3800 di t-e3bg diesel engine service repair manualfjjsekfxswzksmem
This document provides specifications for several Kubota diesel engine models including the V3600-E3B, V3600-T-E3B, V3800DI-T-E3B, V3300-E3BG, V3600-T-E3BG, and V3800DI-T-E3BG. It lists technical details such as the number of cylinders, displacement, power output, operating speed range, lubrication system, cooling system, and dimensions. The specifications are divided into standard engine specifications and conversion formulas.
Kioti daedong ex40 ch tractor parts catalogue manualfjjsekfxswzksmem
The document provides instructions for using a service manual for Daedong machinery. It explains that the labor hours specified were carefully set based on experienced mechanics and are meant to standardize times across skill levels and regions. It also lists several rules for selecting appropriate job codes when submitting warranty requests, such as only using one code per repair and not combining codes if one is included in another. Failure to follow the instructions could result in warranty claim rejection.
1. Read and understand the entire owner's manual before operating the tractor.
2. Only properly trained persons should operate the tractor.
3. Read and follow all warning labels and decals on the tractor.
4. Replace any missing or damaged warning decals.
5. Keep safety decals clean and free of dirt and debris.
Kioti daedong dk901 tractor parts catalogue manualfjjsekfxswzksmem
This document provides instructions and a table of contents for a tractor parts list manual. The instructions explain that the parts list is organized into groups and sub-groups with identifying codes and numbers. It also provides guidance on using the parts list for ordering parts and making repairs. The table of contents lists over 30 engine, drivetrain, and auxiliary system groups that are detailed further in the manual.
Kioti daedong dk451 tractor parts catalogue manualfjjsekfxswzksmem
This document provides instructions for using a parts list manual for tractors. It includes 10 items that describe what each section of the parts list will include such as group codes, part names, component identifiers, reference numbers, and notes. It notes that the parts list is intended to help identify correct part numbers when ordering parts and to assist with repairs by referencing illustrations. Serial numbers and interchangeability are also addressed. The document provides an overview of what information can be found in a tractor parts manual.
Kioti daedong dk55 c tractor parts catalogue manualfjjsekfxswzksmem
This document provides instructions and information for a tractor parts list, including:
1. It outlines 10 items that provide information about how the parts list is organized and how to use it for ordering parts and making repairs.
2. It lists the table of contents which includes over 1000 part groups for the tractor, organized by system.
3. It indicates that the parts list is subject to change without notice due to continuous product improvements.
Kioti daedong dk45 sc tractor parts catalogue manualfjjsekfxswzksmem
This manual provides standard operation times for servicing jobs on Daedong tractors. It instructs technicians to use the provided job codes and times when filling out warranty forms. The times are based on average conditions and a mechanic's ability. They include preparation, inspection and spare times added to the service time. Removal and reinstallation item times cover drainage, removal, inspection/replacement, installation and testing. Conditions excluded from warranty are listed. The manual then provides an extensive table of contents and sections with job codes and times for servicing various tractor components and systems.
Kioti daedong dk35 tractor parts catalogue manualfjjsekfxswzksmem
This document is a spare parts list for DK 35-40-450L tractors. It provides information on part groups, components, references, interchangeability, and specifications for different models. The list contains details on each part, including part number, name, quantity, and remarks. It is intended to help with ordering replacement parts and repair by providing the correct part identification and specifications based on the tractor model and country. The list may be modified over time as products are continuously improved.
Bobcat 873 g series skid steer loader parts catalogue manual (sn 514240001 &a...fjjsekfxswzksmem
This document provides a parts list for a main frame that includes the part numbers, descriptions, remarks, serial numbers, and quantities of each part. Some key parts listed include the main frame, bushings, nuts, bolts, plugs, hooks, brackets, spacers, covers, blocks, guides, braces and more. The parts list is broken into several pages including for an operator cab, seat & seat bar, and seat.
The parts are for various components of a machine or vehicle including the main frame, drive train, axle, disc brakes, operator cab, seat, and seat bar. The document provides detailed information on replacement parts that would be needed to repair or replace components.
Bobcat 853 skid steer loader parts catalogue manual (sn 5102 50001 & above)fjjsekfxswzksmem
This document provides a parts list for the main frame of a machine. It includes 38 line items with descriptions of insulation crossmembers, fenders, covers, bushings, nuts, bolts, breathers, doors, seals, hooks, brackets and other parts. The serial numbers and quantities are also provided for each part listed.
Bobcat 853 skid steer loader parts catalogue manual (sn 508418001 & above )fjjsekfxswzksmem
This document contains parts lists and descriptions for various components of a vehicle. It includes sections for the main frame, operator cab, seat and seat bar. The main frame section lists 27 parts including insulation crossmembers, bushings, nuts, bolts, plugs, covers, and brackets. The operator cab section lists 33 parts such as the cab itself, hardware, insulation, seals, and manuals. The seat and seat bar section provides information on 51 parts for the seat, cushions, tracks, sensors, linkages, and safety equipment.
Bobcat 773 g series skid steer loader parts catalogue manual (sn 500 k 11001 ...fjjsekfxswzksmem
This document contains a parts list for a main frame and various components of an operator cab. It includes the part numbers, descriptions, serial numbers and quantities of 16 main frame parts and 34 operator cab parts. The parts are grouped into sections for the main frame, rear door, bolts, bushings, nuts, covers, brackets, and other components. Specifications like weld on, hinge, and serial number ranges are provided for some parts.
Bobcat 753 skid steer loader parts catalogue manual (sn 511476001 and above )fjjsekfxswzksmem
This document provides a list of parts and descriptions for the main frame, operator cab, seat and seat bar of a machine. It includes 61 references to different parts needed for these assemblies along with descriptions, remarks on usage, and serial number ranges. Key parts listed include the main frame, operator cab enclosure, seat, seat belt, pedal lock shield, and components for the seat bar and suspension. Quantities of individual parts are provided along with notes on applications based on serial number ranges.
Kioti daedong ck22 tractor parts catalogue manualfjjsekfxswzksmem
This document provides instructions for using a labor hour manual for vehicle repairs. It explains that labor hours have been precisely set by experienced mechanics and adjusted for various experience levels. It provides indexes to search for codes and outlines rules for selecting codes, such as only using one code per repair and not using subordinate codes if a higher-level code applies. Codes are also provided for diagnosis time, component mounting/dismounting, and additional time required over standard hours. Failure to follow the instructions could result in warranty claim rejection.
Bobcat 753 g series skid steer loader parts catalogue manual (g-series sn5162...fjjsekfxswzksmem
This document provides a parts list for the main frame and operator cab of an equipment. It includes over 40 parts with descriptions and identifies quantities for each. Some key parts listed are the main frame, operator cab, seat, seat bar, tracks, cushions, brackets, covers, plates, sensors, nuts, bolts, bushings and other hardware. Serial numbers are provided for some items. Remarks columns provide information on updated or replacement parts.
Kioti daedong ck20 hj tractor service repair manualfjjsekfxswzksmem
This document provides an overview and instructions for servicing a tractor. It begins with safety information and then provides a table of contents that lists the chapters and their contents. The chapters cover various systems of the tractor including the engine, clutch, transmission, rear axle, brakes, front axle, steering system, hydraulic system, and electrical system. Each chapter provides the structure and functions of the system and instructions for servicing, troubleshooting, specifications, disassembly and assembly. The document provides detailed maintenance and repair information for technicians servicing the tractor.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
This document is an operation and maintenance manual for McCormick tractor models. It contains sections on general information, instruments and controls, operation, maintenance and adjustments, electrical systems, specifications, hitches and implements. The manual provides instructions for identifying the tractor, engine and safety information, operating instructions, maintenance schedules and safety decals. It is intended to instruct owners and users on safe and proper operation and maintenance of the tractors.
This document provides an introduction and overview of McCormick tractors. It discusses McCormick's commitment to quality and reliability. Authorized dealers will inspect new tractors and provide training to ensure customers benefit from their machine. Regular maintenance is important for continued value, operation, and reliability of the tractor. The manual then provides a table of contents outlining the various sections contained within.
Kubota v3800 di t-e3bg diesel engine service repair manualfjjsekfxswzksmem
This document provides specifications for several Kubota diesel engine models including the V3600-E3B, V3600-T-E3B, V3800DI-T-E3B, V3300-E3BG, V3600-T-E3BG, and V3800DI-T-E3BG. It lists technical details such as the number of cylinders, displacement, power output, operating speed range, lubrication system, cooling system, and dimensions. The specifications are divided into standard engine specifications and conversion formulas.
Kioti daedong ex40 ch tractor parts catalogue manualfjjsekfxswzksmem
The document provides instructions for using a service manual for Daedong machinery. It explains that the labor hours specified were carefully set based on experienced mechanics and are meant to standardize times across skill levels and regions. It also lists several rules for selecting appropriate job codes when submitting warranty requests, such as only using one code per repair and not combining codes if one is included in another. Failure to follow the instructions could result in warranty claim rejection.
1. Read and understand the entire owner's manual before operating the tractor.
2. Only properly trained persons should operate the tractor.
3. Read and follow all warning labels and decals on the tractor.
4. Replace any missing or damaged warning decals.
5. Keep safety decals clean and free of dirt and debris.
Kioti daedong dk901 tractor parts catalogue manualfjjsekfxswzksmem
This document provides instructions and a table of contents for a tractor parts list manual. The instructions explain that the parts list is organized into groups and sub-groups with identifying codes and numbers. It also provides guidance on using the parts list for ordering parts and making repairs. The table of contents lists over 30 engine, drivetrain, and auxiliary system groups that are detailed further in the manual.
Kioti daedong dk451 tractor parts catalogue manualfjjsekfxswzksmem
This document provides instructions for using a parts list manual for tractors. It includes 10 items that describe what each section of the parts list will include such as group codes, part names, component identifiers, reference numbers, and notes. It notes that the parts list is intended to help identify correct part numbers when ordering parts and to assist with repairs by referencing illustrations. Serial numbers and interchangeability are also addressed. The document provides an overview of what information can be found in a tractor parts manual.
Kioti daedong dk55 c tractor parts catalogue manualfjjsekfxswzksmem
This document provides instructions and information for a tractor parts list, including:
1. It outlines 10 items that provide information about how the parts list is organized and how to use it for ordering parts and making repairs.
2. It lists the table of contents which includes over 1000 part groups for the tractor, organized by system.
3. It indicates that the parts list is subject to change without notice due to continuous product improvements.
Kioti daedong dk45 sc tractor parts catalogue manualfjjsekfxswzksmem
This manual provides standard operation times for servicing jobs on Daedong tractors. It instructs technicians to use the provided job codes and times when filling out warranty forms. The times are based on average conditions and a mechanic's ability. They include preparation, inspection and spare times added to the service time. Removal and reinstallation item times cover drainage, removal, inspection/replacement, installation and testing. Conditions excluded from warranty are listed. The manual then provides an extensive table of contents and sections with job codes and times for servicing various tractor components and systems.
Kioti daedong dk35 tractor parts catalogue manualfjjsekfxswzksmem
This document is a spare parts list for DK 35-40-450L tractors. It provides information on part groups, components, references, interchangeability, and specifications for different models. The list contains details on each part, including part number, name, quantity, and remarks. It is intended to help with ordering replacement parts and repair by providing the correct part identification and specifications based on the tractor model and country. The list may be modified over time as products are continuously improved.
Bobcat 873 g series skid steer loader parts catalogue manual (sn 514240001 &a...fjjsekfxswzksmem
This document provides a parts list for a main frame that includes the part numbers, descriptions, remarks, serial numbers, and quantities of each part. Some key parts listed include the main frame, bushings, nuts, bolts, plugs, hooks, brackets, spacers, covers, blocks, guides, braces and more. The parts list is broken into several pages including for an operator cab, seat & seat bar, and seat.
The parts are for various components of a machine or vehicle including the main frame, drive train, axle, disc brakes, operator cab, seat, and seat bar. The document provides detailed information on replacement parts that would be needed to repair or replace components.
Bobcat 853 skid steer loader parts catalogue manual (sn 5102 50001 & above)fjjsekfxswzksmem
This document provides a parts list for the main frame of a machine. It includes 38 line items with descriptions of insulation crossmembers, fenders, covers, bushings, nuts, bolts, breathers, doors, seals, hooks, brackets and other parts. The serial numbers and quantities are also provided for each part listed.
Bobcat 853 skid steer loader parts catalogue manual (sn 508418001 & above )fjjsekfxswzksmem
This document contains parts lists and descriptions for various components of a vehicle. It includes sections for the main frame, operator cab, seat and seat bar. The main frame section lists 27 parts including insulation crossmembers, bushings, nuts, bolts, plugs, covers, and brackets. The operator cab section lists 33 parts such as the cab itself, hardware, insulation, seals, and manuals. The seat and seat bar section provides information on 51 parts for the seat, cushions, tracks, sensors, linkages, and safety equipment.
Bobcat 773 g series skid steer loader parts catalogue manual (sn 500 k 11001 ...fjjsekfxswzksmem
This document contains a parts list for a main frame and various components of an operator cab. It includes the part numbers, descriptions, serial numbers and quantities of 16 main frame parts and 34 operator cab parts. The parts are grouped into sections for the main frame, rear door, bolts, bushings, nuts, covers, brackets, and other components. Specifications like weld on, hinge, and serial number ranges are provided for some parts.
Bobcat 753 skid steer loader parts catalogue manual (sn 511476001 and above )fjjsekfxswzksmem
This document provides a list of parts and descriptions for the main frame, operator cab, seat and seat bar of a machine. It includes 61 references to different parts needed for these assemblies along with descriptions, remarks on usage, and serial number ranges. Key parts listed include the main frame, operator cab enclosure, seat, seat belt, pedal lock shield, and components for the seat bar and suspension. Quantities of individual parts are provided along with notes on applications based on serial number ranges.
Kioti daedong ck22 tractor parts catalogue manualfjjsekfxswzksmem
This document provides instructions for using a labor hour manual for vehicle repairs. It explains that labor hours have been precisely set by experienced mechanics and adjusted for various experience levels. It provides indexes to search for codes and outlines rules for selecting codes, such as only using one code per repair and not using subordinate codes if a higher-level code applies. Codes are also provided for diagnosis time, component mounting/dismounting, and additional time required over standard hours. Failure to follow the instructions could result in warranty claim rejection.
Bobcat 753 g series skid steer loader parts catalogue manual (g-series sn5162...fjjsekfxswzksmem
This document provides a parts list for the main frame and operator cab of an equipment. It includes over 40 parts with descriptions and identifies quantities for each. Some key parts listed are the main frame, operator cab, seat, seat bar, tracks, cushions, brackets, covers, plates, sensors, nuts, bolts, bushings and other hardware. Serial numbers are provided for some items. Remarks columns provide information on updated or replacement parts.
Kioti daedong ck20 hj tractor service repair manualfjjsekfxswzksmem
This document provides an overview and instructions for servicing a tractor. It begins with safety information and then provides a table of contents that lists the chapters and their contents. The chapters cover various systems of the tractor including the engine, clutch, transmission, rear axle, brakes, front axle, steering system, hydraulic system, and electrical system. Each chapter provides the structure and functions of the system and instructions for servicing, troubleshooting, specifications, disassembly and assembly. The document provides detailed maintenance and repair information for technicians servicing the tractor.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
EV Charging at Multifamily Properties by Kevin Donnelly
Kioti daedong dk451 tractor operator manual
1. Congratulations,and welcome to the fabulous world of KIOTI DK451/501/551 ownership,where serious work is
made fun again!
This versatile tractor is a culmination of the entire tractor and diesel knowledge gained by the DAEDONG
INDUSTRIAL CO.,LTD over the years since 1947 and has been designed with the finest materials and under
rigid quality control standards set forth by the DAEDONG ENGINEERING DEPARTMENT.
Knowledge of tractor operation is essential for many years of dependable service and reliability.to help new
owners familiarize themselves with the KIOTI DK451/501/551, it is the policy of KIOTI tractor to provide an
owners manual which includes helpful information about tractor safety,operation and maintenance. If the infor-
mation you seek is not found in this manual, your KIOTI tractor dealer will be happy to help you.please feel free
to contact DAEDONG INDUSTRIAL CO.,LTD with your questions/concerns. Throughout this manual you will
see text in bold type, preceded by the worlds DANGER, WARNING, CAUTION or IMPORTANT.
Such text has the following significance.
Signs Description
DANGER
WARNING
CAUTION
IMPORTANT
This mark indicates hazardous situation which, if not observed, may result in death or
fatal injury.
This mark should be indicated for most dangerous situations only.
This mark indicates potentially hazardous situation which, if not observed, may result in
minor or moderate injury. And this mark can be used as a warning against unsafe activities.
This mark indicates emphasis on notable characteristics in working procedures or infor-
mation on working procedures and technology for convenient use.
This mark indicates potentially hazardous situation which, if not observed, may result in
death or moderate injury.
FOREWORD
2. Abbreviations
4WD
API
ASAE
ASTM
fpm
Hi-Lo
HST
m/s
P.T.O
RH/LH
ROPS
m-1 (rpm)
S-1 (r/s)
SAE
SMV
Definitions
Four Wheel Drive
American Petroleum Institute
American Society of Agricultural Engineers, USA
American Society of Testing and Materials, USA
Feet Per Minute
High Speed-Low Speed
Hydrostatic Transmission
Meters Per Second
Power Take Off
Right-hand and Left-hand sides are determined by
facing in the direction of forward travel
Roll-Over Protective Structures
Revolutions Per Minute
Revolutions Per Second
Society of Automotive Engineers, USA
Slow Moving Vehicle
ABBREVIATION LIST
3. Various universal symbols have been used on the instruments and controls of your KIOTI tractor. Below is a list of the universal
symbols and their meanings.
UNIVERSAL SYMBOLS
Safety Alert Symbol
Fuel-Level
Engine Coolant-Temperature
Parking Brake
Battery Charging Condition
Engine Oil-Pressure
Turn Signal
Power Take-OFF Clutch Control-
OFF Position
Power Take-OFF Clutch Control-
ON Position
Differential Lock
Position Control-Lowered
Position
Hazard Warning Lights
Headlight-Low Beam
Headlight-High Beam
Four-Wheel Drive-ON
Fast
Slow
High Range
Middle Range
Low Range
Neutral Position
Coolant
Preheat
4. INOPERATIVE SERVICE CHECKS
1. Tire pressure and condition ......
2. Lift-rod leveling crank for
proper operation ......................
3. Radiator coolant level and . spe-
cific gravity.............................
(1.071 ~ 1.083 at 16°C (60°F))
4. Pulley V belt ............................
5. Engine oil level .......................
6. Transmission / rear axle oil
level.........................................
7. Front axle differential oil level...
8. Front axle oil level .................
9. Brake adjustment and pedal
equalization ............................
10. Hand brake adjustment .........
PRE-DELIVERY SERVICE
CHECK AND ADJUST AS REQUIRED
20. Air cleaner element and hose
connections ...........................
21. Seat mounting and adjust-
ment........................................
22. All electrical cables, termi-
nals and wires.......................
11. Upper link, draw-bar and pin
in position ..............................
12. Wheel-to-rim clamp bolts and
lock nuts for tightness ...........
13. Wheel disc-to-hub nuts for
tightness ................................
14. Front end weight clamp bolts
for tightness ..........................
15. Front axle support bolts for
tightness ................................
16. Fuel level ...............................
17. Sheet metal and paint
condition ................................
18. Drain diesel fuel filter and
water separator ...................
19. Lubricate all grease fittings ....
SAFETY ITEMS CHECKS
1. Safety decals installed ........
2. Neutral start switches
operative ................................
3. Parking brake operation .....
4. Flashing lights/tail lights
operation ...............................
5. Owner’s manual supplied ...
6. PTO guard installed .............
7. SMV emblem installed.........
(where applicable)
5. PERFORMANCE SERVICE
CHECKS:
1. Engine operation including thro
ttle and governor operation......
2. Transmission ...........................
3. Steering control .......................
4. Differential lock engagement
and disengagement.................
5. Brake action .............................
6. All optional equipment and
accessories ..............................
OPERATIVE SERVICE CHECKS
All operative checks are to be
performed with the tractor at nor-
mal operating temperature.
1. Lights and instruments for
proper operation ...................
2. Fluid and oil leaks ................
3. Maximum no-load speed and
idle speed adjustments and
fuel shut-off ...........................
4. PTO operation ......................
5. Hydraulic system:
Select levers for draft and
position control operation .....
Flow control operation ......
• Draft control for tension
and compression loads.....
• Auxiliary services control
and remote control valves(If
installed) .............................
Tractor Model No.
Tractor serial No.
7. BEFORE OPERATING THE TRACTOR
OPERATING THE TRACTOR
DRIVING THE TRACTOR
PARKING THE TRACTOR
OPERATING THE P.T.O
USING 3-POINT HITCH
SERVICING THE TRACTOR
TRACTOR SAFETY LABELS
1SAFETY PRECAUTIONS
8. 1-2 DK451/501/551
A careful operator is the best operator.
Most accidents can be avoided by ob-
serving certain precautions. To help pre-
vent accidents, use these safety
precautions, and pay attention to the job
at hand. If you can prevent an accident,
your time will have been well spent.
BEFORE OPERATING THE
TRACTOR
6. When getting on and off the tractor,
handholds and step plates should al-
ways be used. This will help to pre-
vent accidental slips trips and falls.
7. Be sure to scrape off mud or soil from
your shoes before mounting the tractor.
8. Watch where you are going at all times
so that you are able to avoid obstacles
that can cause injury or damage to
your tractor.
9. When starting the tractor make sure
your path is clear of people to avoid ac-
cidents caused by sudden movements.
10.Before making reverse movements
with your tractor, you should always
check to see that the path is clear.
1. It is recommended that you read and
understand this entire manual before
operation of your new tractor. Failure
to do so could result in accidents or
injury.
2. Only persons who are properly trained
should be allowed to operate the
tractor.
3. Read and follow all warning labels and
decals affixed to the tractor.
4. Replace any missing or damaged de-
cals as soon as it is practical. A list of
decals is shown on page1-14~16
5. Keep safety decals clean of dirt and
debris.
A12O102A
A12O101A
9. SAFETY PRECAUTIONS 1-3
11. Never operate this tractor or any other
agricultural equipment while under the
influence of alcohol, drugs or while
fatigued.
12.While working in cooperation with
other tractors always communicate
your intentions.
13.Do not start your tractor by shorting
across the starter.
16.All persons using the tractor should
have knowledge of its proper opera-
tion and should read this manual
carefully.
17.Never get off the tractor without set-
ting the parking brake, lowering the
implement to the ground and shutting
of the tractor.
18.No alterations should be made to your
KIOTI tractor without first consulting
your KIOTI dealer.
14.Never start the engine while standing
on the ground.
15.Only the operator should ride on the
tractor unless a passenger seat is
installed. Keep bystanders away from
the tractor while in operation.
A12O104A
A12O103A A12O105A
10. 1-4 DK451/501/551
The ROPS and Cabin should never be
modified by welding, grinding or cutting,
as this can weaken the structure. If any
components is damaged, it must be
replaced.
If the ROPS unit is removed or loosened
for any reason, the parts should be fitted
back to their original positions and all bolts
should be properly torqued.
NOTE
Always use seat belt when the tractor
is equipped with a ROPS and CABIN.
Never use the seat belt when tractor
is not equipped with a ROPS and
CABIN.
21.Extra caution should be taken when
driving tractors with narrow tread
widths. For added stability you should
adjust your rear wheel tread width, see
page 8-3.
19.Before starting your tractor you
should depress the clutch and make
sure that all shift levers are in the
neutral position.
20.For your safety ROPS with a seat belt
is recommended for most applications.
(1) Tread
A12O106A A12O107A
11. SAFETY PRECAUTIONS 1-5
1. Avoid accidental contact with gear shift
levers while the engine is running. Un-
expected tractor movements can result
in bodily injury.
2. Do not park your tractor on a steep
incline, and remember to shut off the
engine and P.T.O before dismounting
the tractor.
OPERATING THE TRACTOR
3. Do not operate your tractor in an en-
closed building without the proper
ventilation. Exhaust fumes can cause
serious injury or death.
A12O109A
A12O108A A12O110A
12. 1-6 DK451/501/551
7. Do not leave equipment in the raised
position when the vehicle is stopped
or unattended.
8. When using implements or attach-
ments with your tractor you should first
read their respective owner’s manual.
You should always keep their safe op-
eration procedures in mind.
9. You should be familiar with your equip-
ment and its limitations.
10.Always use the proper ballast weight
on your tractor when using rear
implements.
4. Make sure that all pressure lines are
tight before starting the tractor.
5. Pull only from the drawbar. Never hitch
anything to the axle housing or any
other point except the drawbar.
Pulling from any other location only in-
crease the risk of serious personal
injury or death.
6. If The front of the tractor tends to rise
up when heavy implements are at-
tached to the three point hitch, the
weights should be installed on the
tractor. Do not operate the tractor with
a light front end.
(1) Drawbar
A12O112A A12O113A
A12O111A
13. SAFETY PRECAUTIONS 1-7
11. Driving forward out of a ditch or steep
inclines can cause the tractor to tip
over backwards. To avoid this you
should back out of these positions.
Four wheel drive tractors can give you
a false sense of security in the trac-
tors ability to maneuver out of these
positions, so extra caution should be
taken.
12.Watch front and rear for and avoid
obstacles at row ends, near trees
and around other obstructions.
14. Never try to get on or off a moving
tractor.
15. When working in groups, always let
the others know what you are going
to do before you do it.
16. Never “freewheel”. Disengaging the
clutch or shifting into neutral while
descending a slope as this could lead
to a loss of control.
17. Do not operate near ditches, holes,
embankments, or other terrain fea-
tures which may collapse under the
tractor’s weight. The risk of tractor
upset is even higher when the ground
is loose or wet.
13.If abused or used incorrectly your trac-
tor can become dangerous to you and
bystanders. Overloading your tractor
or using unsafe equipment can also
be dangerous and should be avoided.
Refer to the “Specifications of Imple-
ment Limitation”, which outlines the
maximum load for safe tractor
operation.
A12O115A
A12O114A
14. 1-8 DK451/501/551
2. Always slow the tractor before
turning. Turning at high speed may tip
the tractor over.
3. Make sure that the Slow Moving Ve-
hicle (SMV) sign is clean and visible.
Use hazard lights as required.
1. Lock the brake pedals together when
traveling at road speeds. Brake both
wheels simultaneously when making
an emergency stop. Uneven braking at
road speeds could cause the tractor to
tip over.
DRIVING THE TRACTOR
(1) Brake Pedal (L) (2) Brake Pedal (R)
(3) Brake Pedal Lock
A12O116A A12O118A
(1) SMV Emblem (USA, AU)
(2) Number plate (EU)
A12O117A
15. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
16. SAFETY PRECAUTIONS 1-9
4. Observe all local traffic and safety
regulations.
5. Turn the headlights on. Dim them when
meeting another vehicle.
6. Drive at speeds that allow you to main-
tain control at all times.
7. Do not apply the differential lock while
traveling at road speeds. As the trac-
tor may run out of control.
8. Avoid sudden movements of the
steering wheel as this can cause a
loss of control of the tractor. This risk
is especially great when traveling at
road speeds.
9. Do not operate an implement while the
tractor is on the road. Lock the three
point hitch in the raised position.
10.When towing other equipment, use a
safety chain and place an SMV em-
blem on it as well.
1. Disengage the P.T.O, lower all
implements, place all control levers in
the neutral position, set the parking
brake, stop the engine and remove the
key.
PARKING THE TRACTOR
A12O119A
17. 1-10 DK451/501/551
3. Before installing or using P.T.O driven
equipment, read the maunfacturer’s
manual and review the safety labels
attached to the equipment.
4. When operating stationary P.T.O
driven equipment, always apply the
tractor parking brake and place chocks
behind and in front of the rear wheels.
Stay clear of all rotating parts.
(1) 3-point hitch lowering speed knob
(A) “LOCK”
USING 3-POINT HITCH
1. Use the 3-point hitch only with equip-
ment designed for 3-point hitch usage.
2. When using a 3-point hitch mounted
implement, be sure to install the proper
counterbalance weight on the front of
the tractor.
3. When transporting on the road, set the
implement lowering control in the
“LOCK” position to hold the implement
in the raised position.
A12O121A A12O122A
(1) P.T.O Shaft Cover (2) P.T.O Shaft Cap
OPERATING THE P.T.O
1. Make sure the tractor is completely
stopped, gears are in neutral and all
moving components have completely
stopped before connecting,
disconnecting, adjusting, cleaning or
servicing any P.T.O driven equipment.
2. Keep the P.T.O shaft cover in place at
all times. Replace the P.T.O shaft cap
when the shaft is not in use.
A12O120A
18. SAFETY PRECAUTIONS 1-11
4. Before jump starting a dead battery,
read and follow all of the instructions.
5. Keep a first aid kit and fire extinguisher
handy at all times.
In order to service your tractor you must
park it on a flat level surface, set the park-
ing brake, place the gear shift lever in
neutral and stop the engine.
1. Allow the tractor time to cool off before
servicing any part that may have become
hot while the tractor was running.
2. You must always stop the engine be-
fore refueling the tractor. Avoid over-
filling the tractor or spilling the fuel.
3. Do not smoke while working around the
battery or when refueling your tractor.
Keep all sparks and flames away for the
battery and fuel tank. The battery pre-
sents an explosive hazard because it
gives off hydrogen and oxygen… espe-
cially when recharging.
SERVICING THE TRACTOR
6. Do not remove the radiator cap while
the coolant is hot. When cool, slowly
rotate the cap to the first stop and al-
low sufficient time for excess pressure
to escape. After all the pressure is re-
leased remove the cap completely. If
your tractor is equipped with a coolant
recovery tank, add coolant there
rather than to the radiator.
A12O124A
A12O123A A12O125A
19. 1-12 DK451/501/551
9. Tire mounting should be done by quali-
fied professionals, with the proper
equipment.
10.Maintaining correct tire pressure is
important for the life of your tire.
(1) Cardboard (3) Magnifying Glass
(2) Hydraulic Line
11. Securely support the tractor when
changing wheels or the wheel tread
width.
12. Make sure that wheel bolts have been
tightened to the specified torque.
13. Escaping hydraulic fluid under pres-
sure has sufficient force to penetrate
skin, causing serious personal injury.
Be sure to release all residual
pressure. Before disconnecting hy-
draulic lines.
Before adding pressure to the hy-
draulic system, make sure that all
connections are tight and that all line,
pipes and hoses are free of damage.
A12O127A A12O128A
7. When working with your tractors elec-
trical components you must first dis-
connect the battery cables.
8. To ensure that there are no accidents
from sparks you must first disconnect
the negative battery cable.
A12O126A
Do not inflate the tires above the rec-
ommended pressure specified in the
owner’s manual.