On the Cheybogan River in Cheybogan. Cost 15,000,000 and is built by K & H Construction Co. The name of the bridge is The Crazy Bridge. The bridge will be .10 miles or 543.43 ft. and will be completed in the summer of 2010.
Ken Bradshaw has over 21 years experience in restoration and renovation of both commercial and home renovations. Ken is able to provide affordable total home services that you would be unable to find with most home repair people or contractors
This document certifies that G.G. Engels with ID number 830916 5042 083 successfully completed two courses - Construction Regulation on 07 June 2011 and Legal Liability on 16 May 2012. The courses were provided by Legislative Compliance Specialists.
The document contains floor area information for a building with 4 levels - a lower ground floor, ground floor, level 1, and roof. The lower ground floor has an area of 0 square meters, the ground floor has an area of 2750 square meters, level 1 has an area of 5650 square meters, and the roof has an area of 8200 square meters. It also includes scale, check, and drawing information for building sections.
The document appears to be a fashion catalog or magazine promoting the autumn/winter 2009-2010 collection from the designer Rime Arodky. It includes photos of models in Arodky's clothing designs, as well as information on the design team involved and a website for further information. Short poems or quotes are also included on various pages throughout the document.
This document provides information about different types of bridges and the engineering design process. It describes four main types of bridges - beam, arch, suspension, and cable-stayed - and gives examples of each. It also outlines the seven steps of the engineering process as: 1) identify the problem, 2) determine constraints, 3) analysis of design, 4) design refinement, 5) implementation plan, 6) modify the implementation, and 7) implementation. The document includes images and examples to illustrate bridges and concludes with a brief quiz to test the reader's understanding.
This document provides details on the construction methodology for the deck of Bridge 182, including an 11-step process:
1) Erecting falsework and soffit formwork
2) Fixing reinforcement, ducts for stressing strands, and void formers
3) Pouring the deck concrete and stressing the strands to pre-compress the deck
4) Removing falsework and formwork after construction is complete
Over 1,200 cubic meters of concrete will be pumped into place over 12 hours using 4 concrete pumps with 42-meter booms. Pre-stressing the deck with 420 meters of high-tensile strands reduces the structure's dead weight and cracking.
Project Execution Plan for Bridge ConstructionDavid H Moloney
The purpose of this presentation is to give an understanding of the Methods, Plant and Sequence to construct an insitu concrete bridge.
This presentation can be used to engage Stakeholders and to get the Site Teams commitment to the programme. Also can be used for Induction Training and as a way to capture and share knowledge.
Project Execution Plan (PEP) details how a project will be executed, monitored and controlled. High in Educational Value and easily understood. Recommended for Continuing Professional Development (CPD)
This Presentation is innovative and has many beneficial uses.
This document outlines the steps taken to build a spaghetti bridge that meets specific requirements. It describes researching bridge design, creating a prototype, testing it, redesigning based on weaknesses found, and building a final bridge that supports 15 pounds. The process involved learning about bridge engineering, designing a Warren truss bridge made of spaghetti, constructing and testing a prototype, redesigning to address issues, and finally building a bridge that spanned 20-30 inches and supported 15 pounds.
Ken Bradshaw has over 21 years experience in restoration and renovation of both commercial and home renovations. Ken is able to provide affordable total home services that you would be unable to find with most home repair people or contractors
This document certifies that G.G. Engels with ID number 830916 5042 083 successfully completed two courses - Construction Regulation on 07 June 2011 and Legal Liability on 16 May 2012. The courses were provided by Legislative Compliance Specialists.
The document contains floor area information for a building with 4 levels - a lower ground floor, ground floor, level 1, and roof. The lower ground floor has an area of 0 square meters, the ground floor has an area of 2750 square meters, level 1 has an area of 5650 square meters, and the roof has an area of 8200 square meters. It also includes scale, check, and drawing information for building sections.
The document appears to be a fashion catalog or magazine promoting the autumn/winter 2009-2010 collection from the designer Rime Arodky. It includes photos of models in Arodky's clothing designs, as well as information on the design team involved and a website for further information. Short poems or quotes are also included on various pages throughout the document.
This document provides information about different types of bridges and the engineering design process. It describes four main types of bridges - beam, arch, suspension, and cable-stayed - and gives examples of each. It also outlines the seven steps of the engineering process as: 1) identify the problem, 2) determine constraints, 3) analysis of design, 4) design refinement, 5) implementation plan, 6) modify the implementation, and 7) implementation. The document includes images and examples to illustrate bridges and concludes with a brief quiz to test the reader's understanding.
This document provides details on the construction methodology for the deck of Bridge 182, including an 11-step process:
1) Erecting falsework and soffit formwork
2) Fixing reinforcement, ducts for stressing strands, and void formers
3) Pouring the deck concrete and stressing the strands to pre-compress the deck
4) Removing falsework and formwork after construction is complete
Over 1,200 cubic meters of concrete will be pumped into place over 12 hours using 4 concrete pumps with 42-meter booms. Pre-stressing the deck with 420 meters of high-tensile strands reduces the structure's dead weight and cracking.
Project Execution Plan for Bridge ConstructionDavid H Moloney
The purpose of this presentation is to give an understanding of the Methods, Plant and Sequence to construct an insitu concrete bridge.
This presentation can be used to engage Stakeholders and to get the Site Teams commitment to the programme. Also can be used for Induction Training and as a way to capture and share knowledge.
Project Execution Plan (PEP) details how a project will be executed, monitored and controlled. High in Educational Value and easily understood. Recommended for Continuing Professional Development (CPD)
This Presentation is innovative and has many beneficial uses.
This document outlines the steps taken to build a spaghetti bridge that meets specific requirements. It describes researching bridge design, creating a prototype, testing it, redesigning based on weaknesses found, and building a final bridge that supports 15 pounds. The process involved learning about bridge engineering, designing a Warren truss bridge made of spaghetti, constructing and testing a prototype, redesigning to address issues, and finally building a bridge that spanned 20-30 inches and supported 15 pounds.
M&M Construction offers bridge building services, with Abby Mavis and Savanna McCabe as contacts. They provide a blueprint for a proposed 3.35 mile long bridge between Hall Avenue and Kieth Street in Houghton Lake, Michigan for $3.5 million, claiming their bridges are of high quality despite being inexpensive due to the owners' experience and care in construction.
This document provides information about a bridge building company called C.A Bridge building including the location of one of their bridges in the Upper Peninsula, a Sketch-Up model of the bridge, facts about the bridge such as its $10,000,000 cost and length of 1.1 miles, and contact information to call the company at 1-800-4606.
Tommy and Nathan built a suspension bridge that they claimed was the best ever. Suspension bridges are useful for crossing longer distances and can withstand wind if constructed properly.
Tommy and Nathan built what they thought was the best suspension bridge ever. Suspension bridges are mainly used to cross longer distances and can withstand wind if constructed properly.
J T & Co is a bridge building company that specializes in large scale bridges up to 3 miles long for $5.3 million. They do not build small bridges but will construct bridges anywhere needed for a reasonable price and strive to complete projects as quickly as possible. Contact them at 1231-464-5509 for any bridge building needs.
S&S Bridge Building claims their bridges are the best because they have experience in bridge building and engineering. They emphasize their experience and engineering knowledge. They assure potential customers they will not be disappointed if hiring S&S Bridge Building for their projects.
Students are invited to create a design for MCC Middle Schools' "Spartan News" t-shirt. The winning design will be announced on October 30th and will win a free t-shirt and the opportunity to create their own graphic design. See Mr. Quinlan for more details.
KAMW Construction builds bridges and believes their bridge is the best because it has many layers and glue to hold it together strongly. They estimate their bridge can support between 300 to 800 pounds. The bridge was designed by Kacey Maxwell and Angela Williams.
A&M Bridge Engineering Co. is an engineering firm that specializes in bridge design and construction, with over 1 week of experience building reliable bridges. They can design and build any type of bridge needed, and interested clients can contact them at 1-800-123-4567 or www.a&mbridges.com for a consultation.
This document proposes building a bridge between Grand Traverse County and Michigan County, showing an image of what the proposed bridge would look like. It suggests contacting L.P. Bridge Builders to build the bridge, as their motto is "You want it we build it", in order to avoid another collapsing bridge.
This document proposes building a bridge between Grand Traverse County and Michigan County, showing an image of what the proposed bridge would look like. It suggests contacting LP Bridge Builders to build the bridge, as their motto is "you want it we build it", in order to avoid another collapsing bridge.
The document promotes a bridge building company called Cook & Drew Crew that designs and builds bridges according to customer specifications. It provides a phone number and images showing a Google Earth picture of a location, a SketchUp model of a bridge, and a picture of a completed bridge made of popsicles to demonstrate the types of bridges that can be built.
Lakeshore Bridge Company promotes its bridges as being able to hold the most weight of any bridge, able to support large loads, for a relatively low cost of about $2 million. The company describes its workers as kind and skilled individuals who do quality work.
Self respect is defined as proper respect for oneself and one's worth as a person. It is needed to respect both oneself and others. Self respect involves recognizing that anything of value requires effort and not assuming the worst in others without reason.
The document promotes The Famous Bridge Builders company and its bridges built by Payton Bladzik and Ashleigh McCabe. It claims their bridges are the best because they are strong, safe, and can withstand impacts that other bridges cannot. It encourages purchasing their bridges, which cost between $4-8 million, to save time and money over alternatives by allowing travel over rather than around obstacles.
Spartan Bridge Building INC builds all sizes of bridges with triangular trusses starting at $5 million, and provides a three year warranty. Their motto is "if you will buy it we will build it".
Our Bridge Company is selling a 5 mile bridge over Bass River for $900 billion that can hold a large weight and survive over 900 nuclear blasts. The bridge has a Stone Crush logo and color options are available.
The document promotes The Famous Bridge Builders company and its bridges built by Payton Bladzik and Ashleigh McCabe. It claims their bridges are the best because they are strong, safe, and can withstand impacts that other bridges cannot. It encourages purchasing their bridges, which cost between $4-8 million, to save time and money over alternatives by allowing travel over rather than around obstacles.
The document discusses the Great Lakes Bridge between St. Ignace and Mackinac Island in Michigan. The bridge is 2.65 miles long and connects the two locations. Building a bridge of this length in Michigan would cost $1,000,000, which includes free painting of the bridge.
In our second session, we shall learn all about the main features and fundamentals of UiPath Studio that enable us to use the building blocks for any automation project.
📕 Detailed agenda:
Variables and Datatypes
Workflow Layouts
Arguments
Control Flows and Loops
Conditional Statements
💻 Extra training through UiPath Academy:
Variables, Constants, and Arguments in Studio
Control Flow in Studio
M&M Construction offers bridge building services, with Abby Mavis and Savanna McCabe as contacts. They provide a blueprint for a proposed 3.35 mile long bridge between Hall Avenue and Kieth Street in Houghton Lake, Michigan for $3.5 million, claiming their bridges are of high quality despite being inexpensive due to the owners' experience and care in construction.
This document provides information about a bridge building company called C.A Bridge building including the location of one of their bridges in the Upper Peninsula, a Sketch-Up model of the bridge, facts about the bridge such as its $10,000,000 cost and length of 1.1 miles, and contact information to call the company at 1-800-4606.
Tommy and Nathan built a suspension bridge that they claimed was the best ever. Suspension bridges are useful for crossing longer distances and can withstand wind if constructed properly.
Tommy and Nathan built what they thought was the best suspension bridge ever. Suspension bridges are mainly used to cross longer distances and can withstand wind if constructed properly.
J T & Co is a bridge building company that specializes in large scale bridges up to 3 miles long for $5.3 million. They do not build small bridges but will construct bridges anywhere needed for a reasonable price and strive to complete projects as quickly as possible. Contact them at 1231-464-5509 for any bridge building needs.
S&S Bridge Building claims their bridges are the best because they have experience in bridge building and engineering. They emphasize their experience and engineering knowledge. They assure potential customers they will not be disappointed if hiring S&S Bridge Building for their projects.
Students are invited to create a design for MCC Middle Schools' "Spartan News" t-shirt. The winning design will be announced on October 30th and will win a free t-shirt and the opportunity to create their own graphic design. See Mr. Quinlan for more details.
KAMW Construction builds bridges and believes their bridge is the best because it has many layers and glue to hold it together strongly. They estimate their bridge can support between 300 to 800 pounds. The bridge was designed by Kacey Maxwell and Angela Williams.
A&M Bridge Engineering Co. is an engineering firm that specializes in bridge design and construction, with over 1 week of experience building reliable bridges. They can design and build any type of bridge needed, and interested clients can contact them at 1-800-123-4567 or www.a&mbridges.com for a consultation.
This document proposes building a bridge between Grand Traverse County and Michigan County, showing an image of what the proposed bridge would look like. It suggests contacting L.P. Bridge Builders to build the bridge, as their motto is "You want it we build it", in order to avoid another collapsing bridge.
This document proposes building a bridge between Grand Traverse County and Michigan County, showing an image of what the proposed bridge would look like. It suggests contacting LP Bridge Builders to build the bridge, as their motto is "you want it we build it", in order to avoid another collapsing bridge.
The document promotes a bridge building company called Cook & Drew Crew that designs and builds bridges according to customer specifications. It provides a phone number and images showing a Google Earth picture of a location, a SketchUp model of a bridge, and a picture of a completed bridge made of popsicles to demonstrate the types of bridges that can be built.
Lakeshore Bridge Company promotes its bridges as being able to hold the most weight of any bridge, able to support large loads, for a relatively low cost of about $2 million. The company describes its workers as kind and skilled individuals who do quality work.
Self respect is defined as proper respect for oneself and one's worth as a person. It is needed to respect both oneself and others. Self respect involves recognizing that anything of value requires effort and not assuming the worst in others without reason.
The document promotes The Famous Bridge Builders company and its bridges built by Payton Bladzik and Ashleigh McCabe. It claims their bridges are the best because they are strong, safe, and can withstand impacts that other bridges cannot. It encourages purchasing their bridges, which cost between $4-8 million, to save time and money over alternatives by allowing travel over rather than around obstacles.
Spartan Bridge Building INC builds all sizes of bridges with triangular trusses starting at $5 million, and provides a three year warranty. Their motto is "if you will buy it we will build it".
Our Bridge Company is selling a 5 mile bridge over Bass River for $900 billion that can hold a large weight and survive over 900 nuclear blasts. The bridge has a Stone Crush logo and color options are available.
The document promotes The Famous Bridge Builders company and its bridges built by Payton Bladzik and Ashleigh McCabe. It claims their bridges are the best because they are strong, safe, and can withstand impacts that other bridges cannot. It encourages purchasing their bridges, which cost between $4-8 million, to save time and money over alternatives by allowing travel over rather than around obstacles.
The document discusses the Great Lakes Bridge between St. Ignace and Mackinac Island in Michigan. The bridge is 2.65 miles long and connects the two locations. Building a bridge of this length in Michigan would cost $1,000,000, which includes free painting of the bridge.
In our second session, we shall learn all about the main features and fundamentals of UiPath Studio that enable us to use the building blocks for any automation project.
📕 Detailed agenda:
Variables and Datatypes
Workflow Layouts
Arguments
Control Flows and Loops
Conditional Statements
💻 Extra training through UiPath Academy:
Variables, Constants, and Arguments in Studio
Control Flow in Studio
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/temporal-event-neural-networks-a-more-efficient-alternative-to-the-transformer-a-presentation-from-brainchip/
Chris Jones, Director of Product Management at BrainChip , presents the “Temporal Event Neural Networks: A More Efficient Alternative to the Transformer” tutorial at the May 2024 Embedded Vision Summit.
The expansion of AI services necessitates enhanced computational capabilities on edge devices. Temporal Event Neural Networks (TENNs), developed by BrainChip, represent a novel and highly efficient state-space network. TENNs demonstrate exceptional proficiency in handling multi-dimensional streaming data, facilitating advancements in object detection, action recognition, speech enhancement and language model/sequence generation. Through the utilization of polynomial-based continuous convolutions, TENNs streamline models, expedite training processes and significantly diminish memory requirements, achieving notable reductions of up to 50x in parameters and 5,000x in energy consumption compared to prevailing methodologies like transformers.
Integration with BrainChip’s Akida neuromorphic hardware IP further enhances TENNs’ capabilities, enabling the realization of highly capable, portable and passively cooled edge devices. This presentation delves into the technical innovations underlying TENNs, presents real-world benchmarks, and elucidates how this cutting-edge approach is positioned to revolutionize edge AI across diverse applications.
QA or the Highway - Component Testing: Bridging the gap between frontend appl...zjhamm304
These are the slides for the presentation, "Component Testing: Bridging the gap between frontend applications" that was presented at QA or the Highway 2024 in Columbus, OH by Zachary Hamm.
Session 1 - Intro to Robotic Process Automation.pdfUiPathCommunity
👉 Check out our full 'Africa Series - Automation Student Developers (EN)' page to register for the full program:
https://bit.ly/Automation_Student_Kickstart
In this session, we shall introduce you to the world of automation, the UiPath Platform, and guide you on how to install and setup UiPath Studio on your Windows PC.
📕 Detailed agenda:
What is RPA? Benefits of RPA?
RPA Applications
The UiPath End-to-End Automation Platform
UiPath Studio CE Installation and Setup
💻 Extra training through UiPath Academy:
Introduction to Automation
UiPath Business Automation Platform
Explore automation development with UiPath Studio
👉 Register here for our upcoming Session 2 on June 20: Introduction to UiPath Studio Fundamentals: https://community.uipath.com/events/details/uipath-lagos-presents-session-2-introduction-to-uipath-studio-fundamentals/
Must Know Postgres Extension for DBA and Developer during MigrationMydbops
Mydbops Opensource Database Meetup 16
Topic: Must-Know PostgreSQL Extensions for Developers and DBAs During Migration
Speaker: Deepak Mahto, Founder of DataCloudGaze Consulting
Date & Time: 8th June | 10 AM - 1 PM IST
Venue: Bangalore International Centre, Bangalore
Abstract: Discover how PostgreSQL extensions can be your secret weapon! This talk explores how key extensions enhance database capabilities and streamline the migration process for users moving from other relational databases like Oracle.
Key Takeaways:
* Learn about crucial extensions like oracle_fdw, pgtt, and pg_audit that ease migration complexities.
* Gain valuable strategies for implementing these extensions in PostgreSQL to achieve license freedom.
* Discover how these key extensions can empower both developers and DBAs during the migration process.
* Don't miss this chance to gain practical knowledge from an industry expert and stay updated on the latest open-source database trends.
Mydbops Managed Services specializes in taking the pain out of database management while optimizing performance. Since 2015, we have been providing top-notch support and assistance for the top three open-source databases: MySQL, MongoDB, and PostgreSQL.
Our team offers a wide range of services, including assistance, support, consulting, 24/7 operations, and expertise in all relevant technologies. We help organizations improve their database's performance, scalability, efficiency, and availability.
Contact us: info@mydbops.com
Visit: https://www.mydbops.com/
Follow us on LinkedIn: https://in.linkedin.com/company/mydbops
For more details and updates, please follow up the below links.
Meetup Page : https://www.meetup.com/mydbops-databa...
Twitter: https://twitter.com/mydbopsofficial
Blogs: https://www.mydbops.com/blog/
Facebook(Meta): https://www.facebook.com/mydbops/
Northern Engraving | Modern Metal Trim, Nameplates and Appliance PanelsNorthern Engraving
What began over 115 years ago as a supplier of precision gauges to the automotive industry has evolved into being an industry leader in the manufacture of product branding, automotive cockpit trim and decorative appliance trim. Value-added services include in-house Design, Engineering, Program Management, Test Lab and Tool Shops.
"Scaling RAG Applications to serve millions of users", Kevin GoedeckeFwdays
How we managed to grow and scale a RAG application from zero to thousands of users in 7 months. Lessons from technical challenges around managing high load for LLMs, RAGs and Vector databases.
Discover top-tier mobile app development services, offering innovative solutions for iOS and Android. Enhance your business with custom, user-friendly mobile applications.
"NATO Hackathon Winner: AI-Powered Drug Search", Taras KlobaFwdays
This is a session that details how PostgreSQL's features and Azure AI Services can be effectively used to significantly enhance the search functionality in any application.
In this session, we'll share insights on how we used PostgreSQL to facilitate precise searches across multiple fields in our mobile application. The techniques include using LIKE and ILIKE operators and integrating a trigram-based search to handle potential misspellings, thereby increasing the search accuracy.
We'll also discuss how the azure_ai extension on PostgreSQL databases in Azure and Azure AI Services were utilized to create vectors from user input, a feature beneficial when users wish to find specific items based on text prompts. While our application's case study involves a drug search, the techniques and principles shared in this session can be adapted to improve search functionality in a wide range of applications. Join us to learn how PostgreSQL and Azure AI can be harnessed to enhance your application's search capability.
Connector Corner: Seamlessly power UiPath Apps, GenAI with prebuilt connectorsDianaGray10
Join us to learn how UiPath Apps can directly and easily interact with prebuilt connectors via Integration Service--including Salesforce, ServiceNow, Open GenAI, and more.
The best part is you can achieve this without building a custom workflow! Say goodbye to the hassle of using separate automations to call APIs. By seamlessly integrating within App Studio, you can now easily streamline your workflow, while gaining direct access to our Connector Catalog of popular applications.
We’ll discuss and demo the benefits of UiPath Apps and connectors including:
Creating a compelling user experience for any software, without the limitations of APIs.
Accelerating the app creation process, saving time and effort
Enjoying high-performance CRUD (create, read, update, delete) operations, for
seamless data management.
Speakers:
Russell Alfeche, Technology Leader, RPA at qBotic and UiPath MVP
Charlie Greenberg, host
How information systems are built or acquired puts information, which is what they should be about, in a secondary place. Our language adapted accordingly, and we no longer talk about information systems but applications. Applications evolved in a way to break data into diverse fragments, tightly coupled with applications and expensive to integrate. The result is technical debt, which is re-paid by taking even bigger "loans", resulting in an ever-increasing technical debt. Software engineering and procurement practices work in sync with market forces to maintain this trend. This talk demonstrates how natural this situation is. The question is: can something be done to reverse the trend?
Dandelion Hashtable: beyond billion requests per second on a commodity serverAntonios Katsarakis
This slide deck presents DLHT, a concurrent in-memory hashtable. Despite efforts to optimize hashtables, that go as far as sacrificing core functionality, state-of-the-art designs still incur multiple memory accesses per request and block request processing in three cases. First, most hashtables block while waiting for data to be retrieved from memory. Second, open-addressing designs, which represent the current state-of-the-art, either cannot free index slots on deletes or must block all requests to do so. Third, index resizes block every request until all objects are copied to the new index. Defying folklore wisdom, DLHT forgoes open-addressing and adopts a fully-featured and memory-aware closed-addressing design based on bounded cache-line-chaining. This design offers lock-free index operations and deletes that free slots instantly, (2) completes most requests with a single memory access, (3) utilizes software prefetching to hide memory latencies, and (4) employs a novel non-blocking and parallel resizing. In a commodity server and a memory-resident workload, DLHT surpasses 1.6B requests per second and provides 3.5x (12x) the throughput of the state-of-the-art closed-addressing (open-addressing) resizable hashtable on Gets (Deletes).
"Choosing proper type of scaling", Olena SyrotaFwdays
Imagine an IoT processing system that is already quite mature and production-ready and for which client coverage is growing and scaling and performance aspects are life and death questions. The system has Redis, MongoDB, and stream processing based on ksqldb. In this talk, firstly, we will analyze scaling approaches and then select the proper ones for our system.
What is an RPA CoE? Session 2 – CoE RolesDianaGray10
In this session, we will review the players involved in the CoE and how each role impacts opportunities.
Topics covered:
• What roles are essential?
• What place in the automation journey does each role play?
Speaker:
Chris Bolin, Senior Intelligent Automation Architect Anika Systems