This document contains technical manuals for wheel loaders models 30ZV-2, 40ZV-2A, and 42ZV-2. It includes sections on general information, operational principles, disassembly and reassembly, and troubleshooting. The manuals cover topics like specifications, component layout, fuel and hydraulic systems, operation of components like the HST pump and motor, and diagnosing performance issues. Serial numbers and engine details are provided for each model.
This document is a parts catalog for a wheel loader model 30ZV-2 powered by a Kubota D1803-M-DI-E3B-WLTC1 engine. It lists parts for the engine, air cleaner, and other systems organized by part number, name, quantity, and applicability. Serial numbers listed are 30K1-5001 through 30K1-5001.
1989 yamaha viking vk 540 series snowmobile service repair manualfjjsjeusekkekm
The document provides a periodic maintenance table that outlines inspection and adjustment check points for a snowmobile. The table is divided into engine, drive/power train, and body sections. It specifies inspection and adjustment tasks to complete every 20, 40, or 80 hours of operation or 400, 800, or 1,600 km. Seasonal checks are also listed. Tasks include inspecting bolts, nuts, belts, brakes, tracks, filters, fluid levels, leaks, wear items, and performing idle speed, ignition timing and other adjustments.
Case ih stx 280 tractor service repair manualujdjkkskmme
This document provides a master table of contents for a service manual covering STX and Steiger series tractors. It lists sections that will provide information on specifications, maintenance, repair procedures, systems descriptions, and troubleshooting for engines, transmissions, steering, brakes, hydraulics, electrical systems, and other components. The sections listed cover models including the STX 280-530 and Steiger 280-535 series tractors, and provide references to additional manuals for engine-specific information.
Caterpillar cat th255 c telehandler service repair manual sn jk200150 to presentfjjsjekksemm
This document is a service manual for a TH255C model forklift. It provides safety information and instructions, specifications, maintenance schedules and procedures for various components of the forklift including the boom, cab, axles, transmission and more. The manual is intended to guide maintenance and repair of the forklift. Serial numbers indicated apply to the models covered.
New holland t8.320 continuously variable transmission (cvt) tractor service r...fujdwjjsekkemme
The document is a service manual that provides specifications and repair instructions for engines and other components of tractor models T8.320, T8.350, T8.380, T8.410, and T8.435. It contains sections on the engine and crankcase, cylinder heads, air/fuel systems, lubrication systems, cooling systems, and electrical systems. Repair procedures are listed by component and illustrated with diagrams.
This document provides part numbers and descriptions for components of the 3TNV74 engine used in Thermo King transport refrigeration units, including the cylinder block, cylinder head and cover, crankshaft, pistons, camshaft, driving gear, oil sump, fuel injection valves, fuel injection pump, and gasket set. It contains detailed lists of parts with part numbers for the various engine assemblies and subassemblies.
Case ih magnum 340 powershift transmission (pst) tractor service repair manua...fusjfjskekme
This document is a service manual for Case IH Magnum tractors that provides information on engine systems, transmission, axles, hydraulics, electrical systems, and other components. It contains sections with part numbers, diagrams, and instructions for repair and maintenance. Safety messages are included throughout to prevent personal injury during operation or service of the machines.
Jcb dieselmax engine (sa sc build) service repair manualfujjdjjkskemme
This document is a service manual for the JCB Dieselmax mechanical engine. It contains sections on general information, care and safety, maintenance, systems descriptions, fault finding, test procedures, and information on the fuel, cooling, lubrication and electrical systems. It provides identification information for engine components, technical specifications, torque settings, recommended lubricants and capacities, service tools, repair parts and kits, lifting instructions, and starting and operating procedures.
This document is a parts catalog for a wheel loader model 30ZV-2 powered by a Kubota D1803-M-DI-E3B-WLTC1 engine. It lists parts for the engine, air cleaner, and other systems organized by part number, name, quantity, and applicability. Serial numbers listed are 30K1-5001 through 30K1-5001.
1989 yamaha viking vk 540 series snowmobile service repair manualfjjsjeusekkekm
The document provides a periodic maintenance table that outlines inspection and adjustment check points for a snowmobile. The table is divided into engine, drive/power train, and body sections. It specifies inspection and adjustment tasks to complete every 20, 40, or 80 hours of operation or 400, 800, or 1,600 km. Seasonal checks are also listed. Tasks include inspecting bolts, nuts, belts, brakes, tracks, filters, fluid levels, leaks, wear items, and performing idle speed, ignition timing and other adjustments.
Case ih stx 280 tractor service repair manualujdjkkskmme
This document provides a master table of contents for a service manual covering STX and Steiger series tractors. It lists sections that will provide information on specifications, maintenance, repair procedures, systems descriptions, and troubleshooting for engines, transmissions, steering, brakes, hydraulics, electrical systems, and other components. The sections listed cover models including the STX 280-530 and Steiger 280-535 series tractors, and provide references to additional manuals for engine-specific information.
Caterpillar cat th255 c telehandler service repair manual sn jk200150 to presentfjjsjekksemm
This document is a service manual for a TH255C model forklift. It provides safety information and instructions, specifications, maintenance schedules and procedures for various components of the forklift including the boom, cab, axles, transmission and more. The manual is intended to guide maintenance and repair of the forklift. Serial numbers indicated apply to the models covered.
New holland t8.320 continuously variable transmission (cvt) tractor service r...fujdwjjsekkemme
The document is a service manual that provides specifications and repair instructions for engines and other components of tractor models T8.320, T8.350, T8.380, T8.410, and T8.435. It contains sections on the engine and crankcase, cylinder heads, air/fuel systems, lubrication systems, cooling systems, and electrical systems. Repair procedures are listed by component and illustrated with diagrams.
This document provides part numbers and descriptions for components of the 3TNV74 engine used in Thermo King transport refrigeration units, including the cylinder block, cylinder head and cover, crankshaft, pistons, camshaft, driving gear, oil sump, fuel injection valves, fuel injection pump, and gasket set. It contains detailed lists of parts with part numbers for the various engine assemblies and subassemblies.
Case ih magnum 340 powershift transmission (pst) tractor service repair manua...fusjfjskekme
This document is a service manual for Case IH Magnum tractors that provides information on engine systems, transmission, axles, hydraulics, electrical systems, and other components. It contains sections with part numbers, diagrams, and instructions for repair and maintenance. Safety messages are included throughout to prevent personal injury during operation or service of the machines.
Jcb dieselmax engine (sa sc build) service repair manualfujjdjjkskemme
This document is a service manual for the JCB Dieselmax mechanical engine. It contains sections on general information, care and safety, maintenance, systems descriptions, fault finding, test procedures, and information on the fuel, cooling, lubrication and electrical systems. It provides identification information for engine components, technical specifications, torque settings, recommended lubricants and capacities, service tools, repair parts and kits, lifting instructions, and starting and operating procedures.
This document contains summaries of two shop manuals for a wheel loader.
The first manual covers the function and structure of the wheel loader. It provides specifications, component layouts, and descriptions of the controller, control systems, hydraulic system, electrical system, and individual components. Diagrams of the electrical, wiring, and hydraulic systems are also included.
The second manual covers operational performance testing and troubleshooting of the wheel loader. It provides standards and procedures for engine testing, evaluating machine performance, component testing, and adjustment. Troubleshooting guides and information on diagnosing issues are also presented.
The document provides specifications for three wheel loader models - the 62Z7, 67Z7, and 67TM7. Key specifications include bucket capacity, operating weight, tipping load, engine details, and dimensions. The 62Z7 and 67Z7 are powered by an ISUZU 4HK1 engine and have travel speeds of 39 km/h in forward and reverse. The 67TM7 comes in a quick coupler or general purpose configuration and is also powered by an ISUZU 4HK1 engine. Dimensional drawings include measurements for overall length, width, height, wheelbase, tread, ground clearance, and dumping angles.
This document is a shop manual for wheel loaders models 62Z7, 67Z7, and 67TM7. It contains information on specifications, component layout, systems, component operation, operational performance testing, and troubleshooting. The wheel loaders are powered by an Isuzu 4HK1 engine. The manual includes diagrams, standards, procedures, and safety information to aid technicians in maintenance and repair.
The document provides specifications for three wheel loader models - the 62Z7, 67Z7, and 67TM7. Key specifications include bucket capacity, operating weight, tipping load, engine details, and dimensions. The 62Z7 and 67Z7 are powered by an ISUZU 4HK1 engine and have travel speeds of 39 km/h in forward and reverse gears. The 67TM7 is available with either a quick coupler or general purpose bucket and is also powered by an ISUZU 4HK1 engine.
The document provides specifications for three wheel loader models - the 62Z7, 67Z7, and 67TM7. Key specifications include bucket capacity, operating weight, tipping load, engine details, and dimensions. The 62Z7 and 67Z7 are powered by an ISUZU 4HK1 engine and have travel speeds of 39 km/h in forward and reverse. The 67TM7 comes in a quick coupler or general purpose configuration and is also powered by an ISUZU 4HK1 engine. Dimensional drawings include measurements for overall length, width, height, wheelbase, tread, ground clearance, and dumping angles.
The document provides specifications for three wheel loader models - the 62Z7, 67Z7, and 67TM7. Key specifications include bucket capacity, operating weight, tipping load, engine details, and dimensions. The 62Z7 and 67Z7 are powered by an ISUZU 4HK1 engine and have travel speeds of 39 km/h in forward and reverse gears. The 67TM7 is available with either a quick coupler or general purpose bucket and is also powered by an ISUZU 4HK1 engine.
This document contains summaries of two shop manuals for a wheel loader. The first manual covers the function and structure of the loader and includes sections on specifications, component layout, and descriptions of the controller, control systems, hydraulic system, and electrical system. The second manual covers operational performance testing and troubleshooting procedures for the loader. It includes sections on testing standards, engine testing, machine performance testing, component testing, and troubleshooting guides. Both manuals provide technical information for maintenance and repair of the loader.
The document provides specifications for three wheel loader models - the 62Z7, 67Z7, and 67TM7. Key specifications include bucket capacity, operating weight, tipping load, engine details, and dimensions. The loaders are powered by an Isuzu 4HK1 engine and have 4 speeds in both forward and reverse. Articulation angle is 40 degrees for all models.
This document is a service manual for the Color Laser MFP CLX-6260 series. It contains 6 sections: 1) Precautions, 2) Product specification and description, 3) Disassembly and Reassembly, 4) Alignment and Troubleshooting, 5) System Diagram, and 6) Reference Information. The document provides specifications for the printer, describes its system overview and hardware/software configuration, and provides instructions for replacing maintenance and service parts through disassembly and reassembly.
Kawasaki 60Z7 WHEEL LOADER Service Repair Manual (Serial No. 60D1-5001 and up...f7sejkddjmdkm
This document is a shop manual for a wheel loader that provides information on disassembly and reassembly. It contains sections on general information, maintenance standards, and removing and installing various body, travel, and front attachment systems. The sections provide specifications, diagrams, and instructions for tasks like servicing the engine, hydraulic and electrical systems, transmission, axles, brakes, and other components. It aims to guide maintenance technicians in repairing and rebuilding the wheel loader.
Kawasaki 60Z7 WHEEL LOADER Service Repair Manual (Serial No. 60D1-5001 and up...jdksme9ddkkd
The document is a shop manual section describing the disassembly and assembly of a control valve for a wheel loader. It includes detailed steps and diagrams for removing and installing the control valve, as well as disassembling and assembling the individual components of the control valve including the bucket spool assembly. The overall document provides maintenance instructions for servicing the control valve.
Kawasaki 60Z7 WHEEL LOADER Service Repair Manual (Serial No. 60D1-5001 and up...8fuiskddmm3e
The section provides maintenance instructions for disassembling and assembling the control valve of a wheel loader. It describes removing and installing the entire control valve, disconnecting and reconnecting hydraulic lines. It also gives steps for disassembling the valve into components like spools and springs, and reassembling them with the proper torque specifications. Diagrams illustrate each part and step in the process.
Kawasaki 60Z7 WHEEL LOADER Service Repair Manual (Serial No. 60D1-5001 and up...dxem8295569
The document is a shop manual section about disassembling and assembling the control valve of a wheel loader. It contains detailed instructions and diagrams for removing and installing the control valve, as well as disassembling and assembling its individual components. The section provides maintenance and repair guidance.
Kawasaki 60 z7 wheel loader service repair manual (serial no. 60d1 5001 and up)pfiskdmjekm
This document is a shop manual for a wheel loader that provides information on disassembly and reassembly. It contains sections on general information, maintenance standards, and removing and installing various body, travel, and front attachment systems. The sections provide specifications, diagrams, and instructions for tasks like servicing the engine, hydraulic and electrical systems, transmission, axles, brakes, and other components. It aims to guide maintenance technicians in repairing and rebuilding the wheel loader.
Kawasaki 60 z7 wheel loader service repair manual (serial no. 60d1 5001 and up)fjjskekmsemm
This document is a shop manual for a wheel loader that provides information on disassembly and reassembly. It contains sections on general information, maintenance standards, and removing and installing various body, travel, and front attachment systems. The sections provide specifications, diagrams, and instructions for tasks like servicing the engine, hydraulic and electrical systems, transmission, axles, brakes, and other components. It aims to guide maintenance technicians in repairing and rebuilding the wheel loader.
Kawasaki 60 z7 wheel loader service repair manual (serial no. 60d1 5001 and up)fjjskekdm
The document is a shop manual section about disassembling and assembling the control valve of a wheel loader. It contains detailed instructions and diagrams for removing and installing the control valve, as well as disassembling and assembling its individual components. The section provides maintenance and repair guidance.
Kawasaki 60 z7 wheel loader service repair manual (serial no. 60d1 5001 and up)f9oseoidkdk
The document is a shop manual section about disassembling and assembling the control valve of a wheel loader. It contains detailed instructions and diagrams for removing and installing the control valve, as well as disassembling and assembling its individual components. The section provides maintenance and repair guidance.
Kawasaki 60Z7 WHEEL LOADER Service Repair Manual (Serial No. 60D1-5001 and up...jfkskmdmmdd
The section provides maintenance instructions for disassembling and assembling the control valve of a wheel loader. It includes step-by-step guides for removing and installing the entire control valve, disconnecting and reconnecting hydraulic lines. The section also details how to disassemble the control valve into its components and reassemble it, with diagrams showing parts like spools, springs, and seals.
DENSO (CRS) TOYOTA 1KD/2KD ENGINE COMMON RAIL SYSTEM (CRS)OBD Codex
This document provides information on changes made to the Common Rail System for the Toyota 1KD/2KD engine used in Land Cruiser Prado, Dyna, and IMV vehicles. The key changes include replacing the supply pump suction control valve and rail pressure limiter, updating the injectors, and adding new fuel injection control functions like microinjection quantity learning and wide-range cylinder correction. The document also lists the applicable vehicle models, replaced components, and their part numbers.
This document provides operation and maintenance instructions for a DVOR 432 navigation system. It includes sections on general information, installation, operation, alignment procedures, maintenance, and fault location/repairs. The installation section describes selecting an installation site, installing foundations and shelters, mounting antennas, cabling, and rack installation including power, RF/AF connections, and external interfaces. Safety precautions and required tools/materials are also outlined.
Hyster u005 (h120 ft) forklift service repair manualfikdkksmmd
This document provides specifications for various lift truck models including:
1) Lifting capacities and weights for the H80FT-H120FT and S80FT-S120FT models ranging from 3,629 to 5,443 kg.
2) Tire sizes, engine specifications, fuel capacities, fluid capacities, and electrical systems specs for the different models.
3) Transmission oil pressures and hydraulic system relief pressures at various temperatures and engine speeds.
4) Steering system specifications like cylinder stroke, turning radius, and turns to lock for each model.
Hyster u005 (h110 ft) forklift service repair manualfikdkksmmd
This document provides specifications for various lift truck models including:
1) Lifting capacities and weights for the H80FT-H120FT and S80FT-S120FT models ranging from 3,629 to 5,443 kg.
2) Tire sizes, engine specifications, fuel capacities, fluid capacities, electrical components, transmission oil pressures, hydraulic relief pressures, and steering details.
3) The document is a service manual containing technical specifications to aid in repair work for these lift truck models.
More Related Content
Similar to Kawasaki 40 zv 2a wheel loader service repair manual
This document contains summaries of two shop manuals for a wheel loader.
The first manual covers the function and structure of the wheel loader. It provides specifications, component layouts, and descriptions of the controller, control systems, hydraulic system, electrical system, and individual components. Diagrams of the electrical, wiring, and hydraulic systems are also included.
The second manual covers operational performance testing and troubleshooting of the wheel loader. It provides standards and procedures for engine testing, evaluating machine performance, component testing, and adjustment. Troubleshooting guides and information on diagnosing issues are also presented.
The document provides specifications for three wheel loader models - the 62Z7, 67Z7, and 67TM7. Key specifications include bucket capacity, operating weight, tipping load, engine details, and dimensions. The 62Z7 and 67Z7 are powered by an ISUZU 4HK1 engine and have travel speeds of 39 km/h in forward and reverse. The 67TM7 comes in a quick coupler or general purpose configuration and is also powered by an ISUZU 4HK1 engine. Dimensional drawings include measurements for overall length, width, height, wheelbase, tread, ground clearance, and dumping angles.
This document is a shop manual for wheel loaders models 62Z7, 67Z7, and 67TM7. It contains information on specifications, component layout, systems, component operation, operational performance testing, and troubleshooting. The wheel loaders are powered by an Isuzu 4HK1 engine. The manual includes diagrams, standards, procedures, and safety information to aid technicians in maintenance and repair.
The document provides specifications for three wheel loader models - the 62Z7, 67Z7, and 67TM7. Key specifications include bucket capacity, operating weight, tipping load, engine details, and dimensions. The 62Z7 and 67Z7 are powered by an ISUZU 4HK1 engine and have travel speeds of 39 km/h in forward and reverse gears. The 67TM7 is available with either a quick coupler or general purpose bucket and is also powered by an ISUZU 4HK1 engine.
The document provides specifications for three wheel loader models - the 62Z7, 67Z7, and 67TM7. Key specifications include bucket capacity, operating weight, tipping load, engine details, and dimensions. The 62Z7 and 67Z7 are powered by an ISUZU 4HK1 engine and have travel speeds of 39 km/h in forward and reverse. The 67TM7 comes in a quick coupler or general purpose configuration and is also powered by an ISUZU 4HK1 engine. Dimensional drawings include measurements for overall length, width, height, wheelbase, tread, ground clearance, and dumping angles.
The document provides specifications for three wheel loader models - the 62Z7, 67Z7, and 67TM7. Key specifications include bucket capacity, operating weight, tipping load, engine details, and dimensions. The 62Z7 and 67Z7 are powered by an ISUZU 4HK1 engine and have travel speeds of 39 km/h in forward and reverse gears. The 67TM7 is available with either a quick coupler or general purpose bucket and is also powered by an ISUZU 4HK1 engine.
This document contains summaries of two shop manuals for a wheel loader. The first manual covers the function and structure of the loader and includes sections on specifications, component layout, and descriptions of the controller, control systems, hydraulic system, and electrical system. The second manual covers operational performance testing and troubleshooting procedures for the loader. It includes sections on testing standards, engine testing, machine performance testing, component testing, and troubleshooting guides. Both manuals provide technical information for maintenance and repair of the loader.
The document provides specifications for three wheel loader models - the 62Z7, 67Z7, and 67TM7. Key specifications include bucket capacity, operating weight, tipping load, engine details, and dimensions. The loaders are powered by an Isuzu 4HK1 engine and have 4 speeds in both forward and reverse. Articulation angle is 40 degrees for all models.
This document is a service manual for the Color Laser MFP CLX-6260 series. It contains 6 sections: 1) Precautions, 2) Product specification and description, 3) Disassembly and Reassembly, 4) Alignment and Troubleshooting, 5) System Diagram, and 6) Reference Information. The document provides specifications for the printer, describes its system overview and hardware/software configuration, and provides instructions for replacing maintenance and service parts through disassembly and reassembly.
Kawasaki 60Z7 WHEEL LOADER Service Repair Manual (Serial No. 60D1-5001 and up...f7sejkddjmdkm
This document is a shop manual for a wheel loader that provides information on disassembly and reassembly. It contains sections on general information, maintenance standards, and removing and installing various body, travel, and front attachment systems. The sections provide specifications, diagrams, and instructions for tasks like servicing the engine, hydraulic and electrical systems, transmission, axles, brakes, and other components. It aims to guide maintenance technicians in repairing and rebuilding the wheel loader.
Kawasaki 60Z7 WHEEL LOADER Service Repair Manual (Serial No. 60D1-5001 and up...jdksme9ddkkd
The document is a shop manual section describing the disassembly and assembly of a control valve for a wheel loader. It includes detailed steps and diagrams for removing and installing the control valve, as well as disassembling and assembling the individual components of the control valve including the bucket spool assembly. The overall document provides maintenance instructions for servicing the control valve.
Kawasaki 60Z7 WHEEL LOADER Service Repair Manual (Serial No. 60D1-5001 and up...8fuiskddmm3e
The section provides maintenance instructions for disassembling and assembling the control valve of a wheel loader. It describes removing and installing the entire control valve, disconnecting and reconnecting hydraulic lines. It also gives steps for disassembling the valve into components like spools and springs, and reassembling them with the proper torque specifications. Diagrams illustrate each part and step in the process.
Kawasaki 60Z7 WHEEL LOADER Service Repair Manual (Serial No. 60D1-5001 and up...dxem8295569
The document is a shop manual section about disassembling and assembling the control valve of a wheel loader. It contains detailed instructions and diagrams for removing and installing the control valve, as well as disassembling and assembling its individual components. The section provides maintenance and repair guidance.
Kawasaki 60 z7 wheel loader service repair manual (serial no. 60d1 5001 and up)pfiskdmjekm
This document is a shop manual for a wheel loader that provides information on disassembly and reassembly. It contains sections on general information, maintenance standards, and removing and installing various body, travel, and front attachment systems. The sections provide specifications, diagrams, and instructions for tasks like servicing the engine, hydraulic and electrical systems, transmission, axles, brakes, and other components. It aims to guide maintenance technicians in repairing and rebuilding the wheel loader.
Kawasaki 60 z7 wheel loader service repair manual (serial no. 60d1 5001 and up)fjjskekmsemm
This document is a shop manual for a wheel loader that provides information on disassembly and reassembly. It contains sections on general information, maintenance standards, and removing and installing various body, travel, and front attachment systems. The sections provide specifications, diagrams, and instructions for tasks like servicing the engine, hydraulic and electrical systems, transmission, axles, brakes, and other components. It aims to guide maintenance technicians in repairing and rebuilding the wheel loader.
Kawasaki 60 z7 wheel loader service repair manual (serial no. 60d1 5001 and up)fjjskekdm
The document is a shop manual section about disassembling and assembling the control valve of a wheel loader. It contains detailed instructions and diagrams for removing and installing the control valve, as well as disassembling and assembling its individual components. The section provides maintenance and repair guidance.
Kawasaki 60 z7 wheel loader service repair manual (serial no. 60d1 5001 and up)f9oseoidkdk
The document is a shop manual section about disassembling and assembling the control valve of a wheel loader. It contains detailed instructions and diagrams for removing and installing the control valve, as well as disassembling and assembling its individual components. The section provides maintenance and repair guidance.
Kawasaki 60Z7 WHEEL LOADER Service Repair Manual (Serial No. 60D1-5001 and up...jfkskmdmmdd
The section provides maintenance instructions for disassembling and assembling the control valve of a wheel loader. It includes step-by-step guides for removing and installing the entire control valve, disconnecting and reconnecting hydraulic lines. The section also details how to disassemble the control valve into its components and reassemble it, with diagrams showing parts like spools, springs, and seals.
DENSO (CRS) TOYOTA 1KD/2KD ENGINE COMMON RAIL SYSTEM (CRS)OBD Codex
This document provides information on changes made to the Common Rail System for the Toyota 1KD/2KD engine used in Land Cruiser Prado, Dyna, and IMV vehicles. The key changes include replacing the supply pump suction control valve and rail pressure limiter, updating the injectors, and adding new fuel injection control functions like microinjection quantity learning and wide-range cylinder correction. The document also lists the applicable vehicle models, replaced components, and their part numbers.
This document provides operation and maintenance instructions for a DVOR 432 navigation system. It includes sections on general information, installation, operation, alignment procedures, maintenance, and fault location/repairs. The installation section describes selecting an installation site, installing foundations and shelters, mounting antennas, cabling, and rack installation including power, RF/AF connections, and external interfaces. Safety precautions and required tools/materials are also outlined.
Similar to Kawasaki 40 zv 2a wheel loader service repair manual (20)
Hyster u005 (h120 ft) forklift service repair manualfikdkksmmd
This document provides specifications for various lift truck models including:
1) Lifting capacities and weights for the H80FT-H120FT and S80FT-S120FT models ranging from 3,629 to 5,443 kg.
2) Tire sizes, engine specifications, fuel capacities, fluid capacities, and electrical systems specs for the different models.
3) Transmission oil pressures and hydraulic system relief pressures at various temperatures and engine speeds.
4) Steering system specifications like cylinder stroke, turning radius, and turns to lock for each model.
Hyster u005 (h110 ft) forklift service repair manualfikdkksmmd
This document provides specifications for various lift truck models including:
1) Lifting capacities and weights for the H80FT-H120FT and S80FT-S120FT models ranging from 3,629 to 5,443 kg.
2) Tire sizes, engine specifications, fuel capacities, fluid capacities, electrical components, transmission oil pressures, hydraulic relief pressures, and steering details.
3) The document is a service manual containing technical specifications to aid in repair work for these lift truck models.
Hyster u005 (h100 ft) forklift service repair manualfikdkksmmd
This document provides specifications for various lift truck models including:
1) Lifting capacities and weights for the H80FT-H120FT and S80FT-S120FT models ranging from 3,629 to 5,443 kg.
2) Tire sizes, engine specifications, fuel capacities, fluid capacities, and electrical systems specs for the different models.
3) Transmission oil pressures and hydraulic system relief pressures at various temperatures and engine speeds.
4) Steering system specifications like cylinder stroke, turning radius, and turns to lock for each model.
Hyster u005 (h90 ft) forklift service repair manualfikdkksmmd
This document provides specifications for various lift truck models including:
1) Lifting capacities and weights for the H80FT-H120FT and S80FT-S120FT models ranging from 3,629 to 5,443 kg.
2) Tire sizes, engine specifications, fuel capacities, fluid capacities, and electrical specifications for the different models.
3) Transmission oil pressures and hydraulic system relief pressures at various temperatures and engine speeds.
4) Steering system specifications including cylinder stroke, turning angle, radius and number of turns to lock for each model.
Hyster u005 (h80 ft) forklift service repair manualfikdkksmmd
This document provides specifications for various lift truck models including:
1) Lifting capacities and weights for the H80FT-H120FT and S80FT-S120FT models ranging from 3,629 to 5,443 kg.
2) Tire sizes, engine specifications, fuel capacities, fluid capacities, and electrical specifications for the different models.
3) Transmission oil pressures and hydraulic system relief pressures at various temperatures and engine speeds.
4) Steering system specifications including cylinder stroke, turning angle, radius and number of turns to lock for each model.
Hyster u005 (h5.5 ft europe) forklift service repair manualfikdkksmmd
This document provides specifications and service information for Hyster lift truck models, including:
- Lift capacities and counterweight weights for various models
- Tire sizes for drive and steer tires
- Fuel, oil, coolant, and hydraulic tank capacities
- Procedures for removing the drive axle, which involves draining fluids, disconnecting brake and drive lines, and removing mounting bolts.
Hyster u005 (h5.0 ft europe) forklift service repair manualfikdkksmmd
This document provides specifications and service information for Hyster lift truck models, including:
- Lift capacities and counterweight weights for various models
- Tire sizes for drive and steer tires
- Fuel, oil, coolant, and hydraulic tank capacities
- Procedures for removing the drive axle, which involves draining fluids, disconnecting brake and drive lines, and removing mounting bolts.
Hyster u005 (h4.5 fts5 europe) forklift service repair manualfikdkksmmd
This document provides specifications and service information for Hyster lift truck models including:
- Lift capacities and weights for various models
- Tire sizes for drive and steer tires
- Fuel, oil, and fluid capacities
- Instructions for removing the drive axle which include draining fluids, disconnecting lines, and lowering the axle assembly.
Hyster u005 (h4.5 ft6 europe) forklift service repair manualfikdkksmmd
This document provides specifications and service information for Hyster lift truck models including:
- Lift capacities and weights for various models
- Tire sizes for drive and steer tires
- Fuel, oil, and fluid capacities
- Instructions for removing the drive axle which include draining fluids, disconnecting lines, and lowering the axle assembly.
Hyster u005 (h4.0 ft6 europe) forklift service repair manualfikdkksmmd
This document provides specifications and service information for Hyster lift truck models including:
- Lift capacities and weights for various models
- Tire sizes for drive and steer tires
- Fuel, oil, and fluid capacities
- Instructions for removing the drive axle which include draining fluids, disconnecting lines, and lowering the axle assembly.
Hyster u005 (h4.0 ft5 europe) forklift service repair manualfikdkksmmd
This document provides specifications and service information for Hyster lift truck models, including:
- Lift capacities and counterweight weights for various models
- Tire sizes for drive and steer tires
- Fuel, oil, coolant, and hydraulic tank capacities
- Procedures for removing the drive axle, which involves draining fluids, disconnecting brake and drive lines, and removing mounting bolts.
Hyster s005 (h120 ft) forklift service repair manualfikdkksmmd
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and hydraulic capacities and specifications
- Electrical system details like alternator outputs and battery specs
- Transmission oil pressures and relief valve settings
- Hydraulic system relief pressures
- Mast speeds and stall speeds for each engine/transmission combination
- Instructions for removing the drive axle
Hyster s005 (h110 ft) forklift service repair manualfikdkksmmd
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck drives and steers
- Fuel, oil, coolant, and other fluid capacities
- Engine and transmission specifications like oil pressures and stall speeds
- Hydraulic system relief pressures
- Steering specifications and turning radii for each model
The document is a service repair guide that lists detailed technical specifications to aid in maintenance and repairs for the specified Hyster lift truck models. It includes components like the drive axle, transmission, engine, hydraulics, and other systems.
Hyster s005 (h100 ft) forklift service repair manualfikdkksmmd
The document provides specifications for Hyster lift truck models H80FT through H120FT, including lifting capacities, tire sizes, fluid capacities, electrical systems, transmission pressures, and hydraulic relief pressures. Key specifications listed include lifting capacities ranging from 8,000 to 12,000 pounds depending on the model, various tire size options, fuel tank capacities of 79-100 liters, hydraulic oil tank capacities of 62-78 liters, and transmission oil pressures between 983-1482 kPa.
Hyster s005 (h90 ft) forklift service repair manualfikdkksmmd
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and hydraulic capacities and specifications
- Electrical system details like alternator outputs and battery specs
- Transmission oil pressures and relief valve settings
- Hydraulic system relief pressures
- Mast speeds and stall speeds for each engine/transmission combination
- Instructions for removing the drive axle
Hyster s005 (h80 ft) forklift service repair manualfikdkksmmd
The document provides specifications for Hyster lift truck models H80FT through H120FT, including lifting capacities, tire sizes, fluid capacities, electrical systems, transmission pressures, and hydraulic relief pressures. It lists the model number, weight, and counterweight for each lift truck. It also provides engine, transmission, hydraulic and electrical component specifications.
Hyster r005 (h120 ft) forklift service repair manualfikdkksmmd
This document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes the lifting capacity, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models. The second half provides general instructions for removing and disassembling the drive axle and differential assembly for repair.
Hyster r005 (h110 ft) forklift service repair manualfikdkksmmd
The document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes lifting capacities, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models and engines. The last section provides general instructions for removing and disassembling the drive axle for repair work.
Hyster r005 (h100 ft) forklift service repair manualfikdkksmmd
The document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes lifting capacities, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models and engines. The last section provides general instructions for removing and disassembling the drive axle for repair work.
Hyster r005 (h90 ft) forklift service repair manualfikdkksmmd
This document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes lifting capacities, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models and engines. The last section provides general instructions for removing and disassembling the drive axle for repair.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
4. 93202-00032
TECHNICAL MANUAL (Operational Principle)
INTRODUCTION.........................................................................................................................IN-01~02
SAFETY ......................................................................................................................................... S-1~34
SECTION 1 GENERAL ......................................................................................................................T-1
Group 1 Specifications........................................................................................................... T1-1
Group 2 Component Specifications ....................................................................................... T1-2
Group 3 Component Layout .................................................................................................. T1-3
SECTION 2 SYSTEM .........................................................................................................................T-2
Group 1 Fuel System............................................................................................................. T2-1
Group 2 Hydraulic System..................................................................................................... T2-2
Group 3 Electrical System ..................................................................................................... T2-3
SECTION 3 COMPONENT OPERATION...........................................................................................T-3
Group 1 HST Pump............................................................................................................... T3-1
Group 2 HST Motor ............................................................................................................... T3-2
Group 3 Axle ......................................................................................................................... T3-3
Group 4 Brake ....................................................................................................................... T3-4
Group 5 Orbitrol..................................................................................................................... T3-5
Group 6 Control Valve ........................................................................................................... T3-6
Group 7 Main Pump .............................................................................................................. T3-7
TECHNICAL MANUAL (Troubleshooting) (P/N 93202-00042) is separately available.
It consists of the following sections:
SECTION 4 OPERATIONAL PERFORMANCE TEST
Group 1 Introduction
Group 2 Standard
Group 3 Engine Test
Group 4 Wheel Loader Test
SECTION 5 TROUBLESHOOTING
Group 1 Diagnosing Procedure
Group 2 Failure List
Group 3 Engine
Group 4 Vehicle Performance
All information, illustrations and specifications in this manual are based on the latest product information available at the
time of publication. The right is reserved to make changes at any time without notice.
5. 30_42ZV-2
TECHNICAL MANUAL (Troubleshooting)
INTRODUCTION........................................................................................................................... IN-01~02
SAFETY ............................................................................................................................................S-1~34
SECTION 4 OPERATIONAL PERFORMANCE TEST........................................................................ T-4
Group 1 Introduction ................................................................................................................T4-1
Group 2 Standard.....................................................................................................................T4-2
Group 3 Engine Test.................................................................................................................T4-3
Group 4 Wheel Loader Test .....................................................................................................T4-4
SECTION 5 TROUBLESHOOTING..................................................................................................... T-5
Group 1 Diagnosing Procedure ...............................................................................................T5-1
Group 2 Failure List..................................................................................................................T5-2
Group 3 Engine ........................................................................................................................T5-3
Group 4 Vehicle Performance..................................................................................................T5-4
TECHNICAL MANUAL (Operational Principle) (P/N 93202-00032) is separately available.
It consists of the following sections:
SECTION 1 GENERAL
Group 1 Specifications
Group 2 Component Specifications
Group 3 Component Layout
SECTION 2 SYSTEM
Group 1 Fuel System
Group 2 Hydraulic System
Group 3 Electrical System
SECTION 3 COMPONENT OPERATION
Group 1 HST Pump
Group 2 HST Motor
Group 3 Axle
Group 4 Brake
Group 5 Orbitrol
Group 6 Control Valve
Group 7 Main Pump
All information, illustrations and specifications in this manual are based on the latest product information available at the
time of publication. The right is reserved to make changes at any time without notice.
6. 93202-00051
TECHNICAL MANUAL (Workshop Manual)
INTRODUCTION........................................................................................................................... IN-01~02
SAFETY ............................................................................................................................................S-1~34
SECTION 1 GENERAL ....................................................................................................................W-1-1
Group 1 Precautions for Disassembling and Assembling.......................................................W1-1
Group 2 Tightening..................................................................................................................W1-2
Group 3 Painting .....................................................................................................................W1-3
SECTION 2 BODY ...........................................................................................................................W-2-1
Group 1 Canopy......................................................................................................................W2-1
Group 2 Cab............................................................................................................................W2-2
Group 3 Counterweight...........................................................................................................W2-3
Group 4 Center Hinge.............................................................................................................W2-4
Group 5 Engine Hood .............................................................................................................W2-5
Group 6 HST Pump and Main Pump ......................................................................................W2-6
Group 7 HST Motor.................................................................................................................W2-7
Group 8 Control Valve.............................................................................................................W2-8
SECTION 3 TRAVEL SYSTEM........................................................................................................W-3-1
Group 1 Tire ............................................................................................................................W3-1
Group 2 Reduction Gear.........................................................................................................W3-2
Group 3 Axle ...........................................................................................................................W3-3
Group 4 Propeller Shaft ..........................................................................................................W3-4
Group 5 Master Cylinder.........................................................................................................W3-5
Group 6 Parking Brake Solenoid ............................................................................................W3-6
Group 7 Inching Valve.............................................................................................................W3-7
Group 8 Power Steering..........................................................................................................W3-8
Group 9 Steering Cylinder.......................................................................................................W3-9
SECTION 4 FRONT ATTACHMENT................................................................................................W-4-1
Group 1 Front Attachment.......................................................................................................W4-1
Group 2 Cylinder .....................................................................................................................W4-2
All information, illustrations and specifications in this manual are based on the latest product information available at
the time of publication. The right is reserved to make changes at any time without notice.
7. INTRODUCTION
IN-01
TO THE READER
• This manual is written for an experienced techni-
cian to provide technical information needed to
maintain and repair this machine.
• Be sure to thoroughly read this manual for cor-
rect product information and service procedures.
ADDITIONAL REFERENCES
• Please refer to the other materials (operator’s
manual, parts catalog, etc.) in addition to this
manual.
MANUAL COMPOSITION
• This manual consists the Technical Manual and the
Workshop Manual.
• Information included in the Technical Manual:
technical information needed for redelivery and
delivery, operation and activation of all devices
and systems, operational performance tests, and
troubleshooting procedures.
• Information included in the Workshop Manual:
technical information needed for maintenance
and repair of the machine, tools and devices
needed for maintenance and repair, mainte-
nance standards, and removal/installation and
assemble/disassemble procedures.
PAGE NUMBER
• Each page has a number, located on the center
lower part of the page, and each number contains
the following information:
Example : T 1-3-5
Consecutive Page Number for Each Group
Group Number
Section Number
T: Technical Manual W: Workshop Manual
8. INTRODUCTION
IN-02
SAFETY ALERT SYMBOL AND
HEADLINE NOTATIONS
In this manual, the following safety alert symbol and
signal words are used to alert the reader to the
potential for personal injury of machine damage.
This is the safety alert symbol. When you see this
symbol, be alert to the potential for personal injury.
Never fail to follow the safety instructions prescribed
along with the safety alert symbol.
The safety alert symbol is also used to draw attention
to component/part weights.
To avoid injury and damage, be sure to use appropri-
ate lifting techniques and equipment when lifting
heavy parts.
• CAUTION:
Indicated potentially hazardous situation which
could, if not avoided, result in personal injury or
death.
• IMPORTANT:
Indicates a situation which, if not conformed to the
instructions, could result in damage to the ma-
chine.
• NOTE:
Indicates supplementary technical information or
know-how.
UNITS USED
• SI Units (International System of Units) are used in
this manual.
MKSA system of units and English units are also
indicated in parentheses just behind SI units.
Example : 24.5 MPa (250 kgf/cm
2
, 3560 psi)
A table for conversion from SI units to other system
units is shown below for reference purposes.
Quantity To Convert
From
Into Multiply By
Quantity To Convert
From
Into Multiply By
Length mm in 0.03937 Pressure MPa kgf/cm
2
10.197
mm ft 0.003281 MPa psi 145.0
Volume L US gal 0.2642 Power kW PS 1.360
L US qt 1.057 kW HP 1.341
m
3
yd
3
1.308 Temperature °C °F °C×1.8+32
Weight kg lb 2.205 Velocity km/h mph 0.6214
Force N kgf 0.10197 min
-1
rpm 1.0
N lbf 0.2248 Flow rate L/min US gpm 0.2642
Torque N⋅m kgf⋅m 1.0197 mL/rev cc/rev 1.0
N⋅m lbf⋅ft 0.7375
9. SAFETY
S-1
RECOGNIZE SAFETY INFORMATION
• These are the SAFETY ALERT SYMBOLS.
• When you see these symbols on your machine or
in operator’s manual, be alert to the potential for
personal injury.
• Follow recommended precautions and safe op-
erating practices.
001-E01A-0001
SA-2644
UNDERSTAND SIGNAL WORDS
• On machine safety signs, signal words designating
the degree or level of hazard - DANGER, WARN-
ING, or CAUTION - are used with the safety alert
symbol.
• DANGER indicates an imminently hazardous
situation which, if not avoided, will result in death
or serious injury.
• WARNING indicates a potentially hazardous sit-
uation which, if not avoided, could result in death
or serious injury.
• CAUTION indicates a potentially hazardous situ-
ation which, if not avoided, may result in minor or
moderate injury.
• DANGER or WARNING safety signs are locat-
ed near specific hazards. General precautions
are listed on CAUTION safety signs.
• Some safety signs don’t use any of the desig-
nated signal words above after the safety alert
symbol has been used on this machine.
• To avoid confusing machine protection with per-
sonal safety messages, a signal word IM-
PORTANT indicates a situation which, if not
avoided, could result in damage to the machine.
• NOTE indicates an additional explanation for
an element of information.
002-E01A-1223
SA-1223
10. SAFETY
S-2
FOLLOW SAFETY INSTRUCTIONS
• Carefully read and follow all safety signs on the
machine and all safety messages in operator’s
manual.
• Safety signs should be installed, maintained and
replaced when necessary.
• If a safety sign or operator’s manual is damaged
or missing, order a replacement from your au-
thorized dealer in the same way you order other
replacement parts (be sure to state machine
model and serial number when ordering).
• Learn how to operate the machine and its controls
correctly and safely.
• Allow only trained, qualified, authorized personnel
to operate the machine.
• Keep your machine in proper working condition.
• Unauthorized modifications of the machine may
impair its function and/or safety and affect ma-
chine life.
• Do not modify any machine parts without author-
ization.
Failure to do so may deteriorate the part safety,
function, and/or service life. In addition, personal
accident, machine trouble, and/or damage to
material caused by unauthorized modifications
will void KCM Warranty Policy.
• Do not use attachments and/or optional parts or
equipment not authorized by KCM. Failure to do
so may deteriorate the safety, function, and/or
service life of the machine. In addition, personal
accident, machine trouble, and/or damage to
material caused by using unauthorized attach-
ments and/or optional parts or equipment will
void KCM Warranty Policy.
• The safety messages in this SAFETY chapter are
intended to illustrate basic safety procedures of
machines. However it is impossible for these safety
messages to cover every hazardous situation you
may encounter. If you have any questions, you
should first consult your supervisor and/or your au-
thorized dealer before operating or performing
maintenance work on the machine.
003-E01B-0003
SA-003
11. SAFETY
S-3
PREPARE FOR EMERGENCIES
• Be prepared if a fire starts or if an accident occurs.
• Keep a first aid kit and fire extinguisher on hand.
• Thoroughly read and understand the label at-
tached on the fire extinguisher to use it properly.
• To ensure that a fire extinguisher can be always
used when necessary, check and service the fire
extinguisher at the recommended intervals as
specified in the fire-extinguisher manual.
• Establish emergency procedure guidelines to
cope with fires and accidents.
• Keep emergency numbers for doctors, ambu-
lance service, hospital, and fire department
posted near your telephone.
004-E01A-0437
SA-437
WEAR PROTECTIVE CLOTHING
• Wear close fitting clothing and safety equipment
appropriate to the job.
You may need:
A hard hat
Safety shoes
Safety glasses, goggles, or face shield
Heavy gloves
Hearing protection
Reflective clothing
Wet weather gear
Respirator or filter mask.
Be sure to wear the correct equipment and clothing
for the job. Do not take any chances.
• Avoid wearing loose clothing, jewelry, or other
items that can catch on control levers or other
parts of the machine.
• Operating equipment safely requires the full atten-
tion of the operator. Do not wear radio or music
headphones while operating the machine.
005-E01A-0438
SA-438
12. SAFETY
S-4
PROTECT AGAINST NOISE
• Prolonged exposure to loud noise can cause im-
pairment or loss of hearing.
• Wear a suitable hearing protective device such
as earmuffs or earplugs to protect against objec-
tionable or uncomfortably loud noises.
006-E01A-0434
SA-434
INSPECT MACHINE
• Inspect your machine carefully each day or shift by
walking around it before you start it to avoid per-
sonal injury.
• In the walk-around inspection be sure to cover all
points described in the “INSPECT MACHINE
DAILY BEFORE STARTING” section in the op-
erator’s manual.
007-E01A-0435
SA-435
13. SAFETY
S-5
GENERAL PRECAUTIONS FOR CAB
• Before entering the cab, thoroughly remove all
dirt and/or oil from the soles of your work boots. If
any control such as a pedal is operated while
with dirt and/or oil on the soles of the operator’s
work boots the operator’s foot may slip off the
pedal, possibly resulting in a personal accident.
• Do not leave parts and/or tools lying around the
operator’s seat. Store them in their specified lo-
cations.
• Avoid storing transparent bottles in the cab. Do
not attach any transparent type window decora-
tions on the windowpanes as they may focus
sunlight, possibly starting a fire.
• Refrain from listening to the radio, or using music
headphones or mobile telephones in the cab
while operating the machine.
• Keep all flammable objects and/or explosives
away from the machine.
• After using the ashtray, always cover it to extin-
guish the match and/or tobacco.
• Do not leave cigarette lighters in the cab. When
the temperature in the cab increases, the lighter
may explode.
524-E01A-0000
USE HANDHOLDS AND STEPS
• Falling is one of the major causes of personal injury.
• When you get on and off the machine, always
face the machine and maintain a three-point
contact with the steps and handrails.
• Do not use any controls as hand-holds.
• Never jump on or off the machine. Never mount
or dismount a moving machine.
• Be careful of slippery conditions on platforms,
steps, and handrails when leaving the machine.
008-E01A-0439
SA-439
14. SAFETY
S-6
ADJUST THE OPERATOR'S SEAT
• A poorly adjusted seat for either the operator or for
the work at hand may quickly fatigue the operator
leading to miss-operations.
• The seat should be adjusted whenever changing
the operator for the machine.
• The operator should be able to fully depress the
pedals and to correctly operate the control levers
with his back against the seat back.
• If not, move the seat forward or backward, and
check again.
• Adjust the rear view mirror position so that the
best rear visibility is obtained from the operator’s
seat. If the mirror is broken, immediately replace
it with a new one.
009-E01A-0462
SA-462
ENSURE SAFETY BEFORE RISING FROM OR LEAVING OPERATOR’S SEAT
• Before rising from the operator’s seat to open/close either side window or to adjust the seat position, be sure to
first lower the front attachment to the ground and then move the loader control lever to the LOCK position.
Failure to do so may allow the machine to unexpectedly move when a body part unintentionally comes in con-
tact with a control lever, possibly resulting in serious personal injury or death.
• Before leaving the machine, be sure to first lower the front attachment to the ground and then move the
loader control lever to the LOCK position. Turn the key switch OFF to stop the engine.
• Before leaving the machine, close all windows, doors, and access covers and lock them up.
NEVER RIDE ATTACHMENT
• Never allow anyone to ride attachment or the load.
This is an extremely dangerous practice.
15. SAFETY
S-7
FASTEN YOUR SEAT BELT
• If the machine should overturn, the operator may
become injured and/or thrown from the cab. Addi-
tionally the operator may be crushed by the over-
turning machine, resulting in serious injury or death.
• Prior to operating the machine, thoroughly ex-
amine webbing, buckle and attaching hardware.
If any item is damaged or worn, replace the seat
belt or component before operating the machine.
• Be sure to remain seated with the seat belt se-
curely fastened at all times when the machine is
in operation to minimize the chance of injury from
an accident.
• We recommend that the seat belt be replaced
every three years regardless of its apparent
condition.
010-E01A-0237
SA-237
MOVE AND OPERATE MACHINE SAFELY
• Bystanders can be run over.
• Take extra care not to run over bystanders. Con-
firm the location of bystanders before moving, or
operating the machine.
• Always keep the travel alarm and horn in working
condition (if equipped). It warns people when the
machine starts to move.
• Use a signal person when moving, or operating
the machine in congested areas. Coordinate
hand signals before starting the machine.
• Use appropriate illumination. Check that all lights
are operable before operating the machine. If
any faulty illumination is present, immediately
repair it.
011-E01A-0398
SA-398
16. SAFETY
S-8
HANDLE STARTING AIDS SAFELY
Starting fluid:
• Starting fluid is highly flammable.
• Keep all sparks and flame away when using it.
• Keep starting fluid well away from batteries and
cables.
• Remove container from machine if engine does
not need starting fluid.
• To prevent accidental discharge when storing a
pressurized container, keep the cap on the con-
tainer, and store it in a cool, well-protected loca-
tion.
• Do not incinerate or puncture a starting fluid
container.
036-E01A-0293-3
SA-293
OPERATE ONLY FROM OPERATOR'S SEAT
• Inappropriate engine starting procedures may
cause the machine to runaway, possibly resulting in
serious injury or death.
• Start the engine only when seated in the opera-
tor's seat.
• NEVER start the engine while standing on the
tire or on ground.
• Do not start engine by shorting across starter
terminals.
• Before starting the engine, confirm that all control
levers are in neutral.
• Before starting the engine, confirm the safety
around the machine and sound the horn to alert
bystanders.
012-E01B-0431
SA-431
17. SAFETY
S-9
JUMP-STARTING
• Battery gas can explode, resulting in serious injury.
• If the engine must be jump-started, be sure to
follow the instructions shown in the “OPERAT-
ING THE ENGINE” chapter in the operator’s
manual.
• The operator must be in the operator’s seat so
that the machine will be under control when the
engine starts.
Jump-starting is a two-person operation.
• Never use a frozen battery.
• Failure to follow correct jump-starting procedures
could result in a battery explosion or a runaway
machine.
S013-E01A-0032
SA-032
INVESTIGATE JOB SITE BEFOREHAND
• When working at the edge of an excavation or on a
road shoulder, the machine could tip over, possibly
resulting in serious injury or death.
• Investigate the configuration and ground condi-
tions of the job site beforehand to prevent the
machine from falling and to prevent the ground,
stockpiles, or banks from collapsing.
• Make a work plan. Use machines appropriate to
the work and job site.
• Reinforce ground, edges, and road shoulders as
necessary. Keep the machine well back from the
edges of excavations and road shoulders.
• When working on an incline or on a road shoul-
der, employ a signal person as required.
• Confirm that your machine is equipped a FOPS
cab before working in areas where the possibility
of falling stones or debris exist.
• When the footing is weak, reinforce the ground
before starting work.
• When working on frozen ground, be extremely
alert. As ambient temperatures rise, footing be-
comes loose and slippery.
• Beware of the possibility of fire when operating
the machine near flammable objects such as dry
grass.
015-E01B0447
SA-447
18. SAFETY
S-10
EQUIPMENT OF HEAD GUARD, ROPS,
FOPS
In case the machine is operated in areas where the
possibility of falling stones or debris exist, equip a
head guard, ROPS, or FOPS according to the poten-
tial hazardous conditions. (The standard cab for this
machine corresponds to ROPS and FOPS.)
ROPS: Roll-Over Protective Structure
FOPS: Falling Object Protective Structure
SA-521
PROVIDE SIGNALS FOR JOBS INVOLV-
ING MULTIPLE NUMBERS OF MACHINES
• For jobs involving multiple numbers of machines,
provide signals commonly known by all personnel
involved. Also, appoint a signal person to coordi-
nate the job site. Make sure that all personnel obey
the signal person’s directions.
018-E01A-0481
SA-481
19. SAFETY
S-11
KEEP RIDERS OFF MACHINE
• Riders on machine are subject to injury such as
being struck by foreign objects and being thrown off
the machine.
• Only the operator should be on the machine.
Keep riders off.
• Riders also obstruct the operator’s view, resulting
in the machine being operated in an unsafe
manner.
014-E01B-0427
SA-427
DRIVE SAFELY
• Beware of the possibility of slipping and/or turning
over the machine when driving on a slope.
• When driving on level ground, hold the bucket at
mark (A) 300 to 400 mm (12 to 16 in) above the
ground as illustrated.
• Avoid driving over any obstacles.
• Drive the machine slowly when driving on rough
terrain.
• Avoid quick direction changes. Failure to do so
may cause the machine to turn over.
• If the engine stops while driving, the steering
function becomes inoperative. Immediately stop
the machine by applying the bake to prevent
personal accident.
•
• Even though the machine is equipped with the
emergency steering system, if the steering function
becomes inoperable during drive operation, press
the emergency steering check switch on the right
console to activate the emergency steering system.
Then, immediately park and stop the machine in a
safe location.
019-E07A-0448
SA-448
20. SAFETY
S-12
DRIVE MACHINE SAFELY (WORK SITE)
• Before driving the machine, always confirm that the
steering wheel/ forward/reverse lever direction cor-
responds to the direction you wish to drive.
• Be sure to detour around any obstructions.
• Driving on a slope may cause the machine to slip or
overturn, possibly resulting in serious injury or
death.
• When driving up or down a slope, keep the
bucket facing the direction of travel, approxi-
mately 300 to 400 mm (approximately 12 to 16 in)
(A) above the ground.
• If the machine starts to skid or becomes unstable,
immediately lower the bucket to the ground and
stop.
• Driving across the face of a slope or steering on a
slope may cause the machine to skid or overturn. If
the direction must be changed, move the machine
to level ground, then, change the direction to ensure
safe operation.
019-E05B-0515
SA-449
SA-450
SA-451
DRIVE SAFELY WITH BUCKET LOADED
• If the machine is operated incorrectly while driving
with the bucket loaded, the machine may turn over.
Be sure to follow all of the instructions indicated
below.
• When driving the machine on a job site with the
bucket loaded, hold the bucket as low as possi-
ble to keep the machine balanced and to have
good visibility.
• Do not exceed the rated load capacity. Always
operate the machine within the rated load capac-
ity.
• Avoid fast starts, stops, and quick turns. Failure
to do so may result in personal injury and/or
death.
• Avoid rapid drive direction changes which could
possibly cause personal injury and/or death.
SA-400
21. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
22. SAFETY
S-13
DRIVE ON SNOW SAFELY
• Beware of the possibility of slipping or turning over
the machine when driving on frozen snow surfaces.
• The machine may slip more easily than expected
on frozen snow surfaces even if the incline is
small. Reduce speed when driving. Avoid fast
starts, stops and quick turns.
• Road shoulder and/or set-up utilities covered
with snow are difficult to locate. Be sure where
they are before removing snow.
• Be sure to use tire chains when driving on snow.
• Avoid applying the brake for quick stops on snow.
If a quick stop is required, lower the bucket to the
ground.
052-E02A-0452
SA-452
TRAVEL ON PUBLIC ROADS SAFELY
• This machine is not allowed to drive on public loads
with the bucket loaded.
• Be sure to empty the bucket.
• Hold the bucket at mark (A) 300 to 400 mm (12 to
16 in) above the road surface as illustrated.
• Even though the machine is equipped with the
emergency steering system, if the steering function
becomes inoperable during operation, press the
emergency steering check switch on the right con-
sole to activate the emergency steering system.
Then, immediately park and stop the machine in a
safe location.
053-E02A-0453
SA-453
23. SAFETY
S-14
AVOID INJURY FROM ROLLAWAY ACCI-
DENTS
• Death or serious injury may result if you attempt to
mount or stop a moving machine.
To avoid rollways:
• Select level ground when possible to park ma-
chine.
• Do not park the machine on a grade.
• Lower the bucket to the ground.
• Place the forward/reverse lever (switch) in neu-
tral, and pull up the park brake switch (lever) in
the ON (parking brake) position.
• Run the engine at low idle speed without load for
5 minutes to cool down the engine.
• Stop the engine and remove the key from the key
switch.
• Pull the lock lever to LOCK position.
• Block both tires and lower the bucket to the
ground.
• Position the machine to prevent rolling.
• Park a reasonable distance from other machines.
020-E02A-0516
SA-457
SA-458
24. SAFETY
S-15
AVOID ACCIDENTS FROM BACKING UP
AND TURNING
• Make sure no one is working under or close to the
machine before backing up or turning the machine
to avoid personal injury and/or death by being run
over or entangled in the machine.
• Keep all personnel away from the machine by
sounding the horn and/or using hand signals.
Use extra care to be sure no one is in from the
articulation area before turning the machine.
• Keep windows, mirrors, and lights in good condi-
tion.
• Reduce travel speed when dust, heavy rain, fog,
etc., reduce the visibility.
• In case good visibility is not obtained, use a sig-
nal person to guide you.
021-E02A-0517
SA-383
SA-312
AVOID POSITIONING BUCKET OVER
ANYONE
• Never allow the bucket to pass over co-workers
and/or the dump truck operator’s cab. Falling mate-
rial from the bucket or contact with bucket may
cause serious personal accidents and/or damage to
the machine.
• Avoid carrying the bucket over the co-workers to
ensure safe operation.
023-E02A-0518
SA-518