Controlling your home is as easy as opening the doors of your car! With the Key Popp KFOB-C can turn on lights, heating and blinds open windows with a single button. Using the remote control KFOB-C is as simple as using the car key and is equally small and compact and fits your keychain.
With its role as lead driver, you can use the KFOB-C as a standalone remote controller without using a box or central home automation controller. Devices such as plugs, blinds, drives and electronic locks can be changed by KFOB-C directly. Once a device is added to the remote control C-KFOB check the type of device (switch, dimmer, ...) and assign the buttons with the appropriate commands.
Of course, you can also include the C-KFOB a Z-Wave home automation network exists. You will be able to trigger predefined, such as opening the garage door with the simultaneous illumination of all the lights in your garden scenes push of a button. Or start the scenario of "Goodnight," which turns off all lights and appliances in your house with one touch of a button when you go to bed
The KFOB-C has a soft and durable casing and a robust slider prevents unintentional keystrokes. This makes KFOB-C, an indispensable part of your keychain and a companion anywhere in your home.
CHARACTERISTICS:
Key remote control
Ultra-ultra compact design
4 configurable buttons
Controls up to 4 groups / scenes
Sliding protection component
Possibility as a primary controller or secondary controller with home automation controller
Optimizing battery life (2 years)
It supports secure communications
The Z-Wave technology +
Wireless firmware update (OTA).
TECHNICAL CHARACTERISTICS :
Module Type: Z-Wave Transmitter
Power: 3V CR2032 lithium battery 1
Battery life: 2 years in normal use
Frequency: 868.42 MHz
Transmission distance: 30m indoor
Protection: IP20
Dimensions: 44 x 30 x 10 mm (L x W x H)
Weight: 30 g
Operating temperature: 0-40 ° C
2. HORIZONTAL DRIVE HD 410 AC
various attachments may be quickly
attached or interchanged to the main
drive unit.
certain attachments for eg. Z-blander
type LMZ-5 incorporate a magnetic
cover lock which is connected to the
apt socket.
3. SETTING AND OPERATION
it has 4 programming keys below the two
line display to set rpm and timer
another 4 operation key below the
programming key to start/stop and speed
control for main drive.
After 3 sec of power a message is displayed.
7. Operation with timer function
• If you want to set timer press Next.
• Upper display will show a message “timer
setting OFF”.
• Use ↑ and ↓ keys to set timer ON.
• Press Enter.
• Press Next to set off Timer.
• Use ↑ and ↓ keys to set required time.
• Press Enter.
8. Technical Specifications
Electric motor 1-HP, 230-V AC, 50 Hertz, 3-Ph
AC Vari-Drive 0.75 Kw, 1HP, 230 VAC
Connector LC 1, D-173, Coil 230 VAC
Glass Fuse 10A / 30 mm
Overall Dimension 550 x 250 x 470 mm
Net Weight 70 kg