This technical manual provides instructions for servicing a John Deere M653/655/665 mid-mount ZTRAK. It contains sections covering general diagnostic information, specifications, component locations, wiring diagrams, troubleshooting charts, and repair procedures. Safety precautions are outlined, including proper lifting of equipment, safe handling of batteries and fluids, and protective equipment for technicians.
John deere 355 d lawn garden tractor service repair manualfjskedsxmmem
This technical manual provides specifications and information for key components and systems of the John Deere 355D Lawn and Garden Tractor, including the engine, fuel system, electrical system, power train, steering, brakes, hydraulics, implement lift, mower attachments, dimensions, wheels/tires, and torque specifications for fasteners. The manual is organized into sections for each major system to keep related information together.
John deere 990 compact utility tractor service repair manualfjsjekdmmeme
The technical manual provides specifications and service information for the 990 Compact Utility Tractor. It includes sections on general vehicle specifications, the diesel engine, electrical system, fuel system, drive train, rear PTO, hydraulic system, and capacities. The manual instructs technicians on safety procedures, component locations, schematics, theory of operation, troubleshooting, diagnostics, tests and adjustments, and repair. It also provides tables listing torque specifications for fasteners in inch, metric, and JIS systems. Additional sections specify requirements for diesel fuel and storage procedures.
John deere z trak f620 mower service repair manual (tm1678)udjjjksmemmmd
This technical manual provides instructions for servicing John Deere Z-Trak F620, F680, and F687 equipment. It is organized into sections covering specifications, component locations, schematics, theory of operation, troubleshooting, diagnostics, tests, adjustments, and repairs. Safety procedures are outlined, including proper lifting of equipment, use of protective equipment, safe handling of fluids and batteries, and emergency procedures.
Mc cormick x5 series t4i (2014 ) - rs28 - x5.50 tractor service repair manualufjjsejfkskemme
This document provides component part numbers and descriptions for an engine. It lists 71 individual parts for the engine in the X5 Series T4i model from 2014, including the cylinder block, cylinder head, pistons, rods, crankshaft, gears, pumps, sensors, hoses and other minor components. Each part is identified by a reference number, quantity, and brief description. It appears to be an exploded diagram or parts list for the complete disassembly and reassembly of the engine.
Mc cormick x5 series t4i (2014 ) - rs28 - x5.30 tractor service repair manualufjjsejfkskemme
This document provides information on engine components for an X5 Series T4i engine from 2014. It lists 70 individual engine components, identified by reference number and name. For each component, it specifies the part number and quantity required. Some components note that they are not serviced or are for replacement purposes only. The document provides an exploded diagram-style breakdown of engine parts.
Mc cormick x4 series (2014 ) - rs52 - x4.50 tractor service repair manualufjjsejfkskemme
This document provides parts information for a Deutz tcd 3.6 l4 - 62.5 kw engine. It includes images and part numbers for various engine components such as filters, sensors, bolts, pipes, and other parts. Contact the spare parts department for assistance.
Mc cormick vf n series restyling (2010- ) - rp05 - v90 tractor service repair...ufjjsejfkskemme
This document provides parts information for various engine components. It lists part numbers, descriptions, and other technical details. Key information includes:
- It covers components for engines with serial numbers U056074 t2 and U056075 t1.
- The parts include cylinders, pistons, gears, pumps, and other engine internals.
- Specifications like part quantity, material, and application are provided for each part listed.
Mc cormick v series cab tier 3 new generation (2007 2009) - rp04 - 75 tractor...ufjjsejfkskemme
This document provides component part information for the repair of a Perkins XL75075 75hp engine. It includes images and descriptions of individual engine parts such as the cylinder block, cylinder head, camshaft, pistons, and other internal engine components. Specifications like part numbers, quantity needed, and application details are provided for each part.
John deere 355 d lawn garden tractor service repair manualfjskedsxmmem
This technical manual provides specifications and information for key components and systems of the John Deere 355D Lawn and Garden Tractor, including the engine, fuel system, electrical system, power train, steering, brakes, hydraulics, implement lift, mower attachments, dimensions, wheels/tires, and torque specifications for fasteners. The manual is organized into sections for each major system to keep related information together.
John deere 990 compact utility tractor service repair manualfjsjekdmmeme
The technical manual provides specifications and service information for the 990 Compact Utility Tractor. It includes sections on general vehicle specifications, the diesel engine, electrical system, fuel system, drive train, rear PTO, hydraulic system, and capacities. The manual instructs technicians on safety procedures, component locations, schematics, theory of operation, troubleshooting, diagnostics, tests and adjustments, and repair. It also provides tables listing torque specifications for fasteners in inch, metric, and JIS systems. Additional sections specify requirements for diesel fuel and storage procedures.
John deere z trak f620 mower service repair manual (tm1678)udjjjksmemmmd
This technical manual provides instructions for servicing John Deere Z-Trak F620, F680, and F687 equipment. It is organized into sections covering specifications, component locations, schematics, theory of operation, troubleshooting, diagnostics, tests, adjustments, and repairs. Safety procedures are outlined, including proper lifting of equipment, use of protective equipment, safe handling of fluids and batteries, and emergency procedures.
Mc cormick x5 series t4i (2014 ) - rs28 - x5.50 tractor service repair manualufjjsejfkskemme
This document provides component part numbers and descriptions for an engine. It lists 71 individual parts for the engine in the X5 Series T4i model from 2014, including the cylinder block, cylinder head, pistons, rods, crankshaft, gears, pumps, sensors, hoses and other minor components. Each part is identified by a reference number, quantity, and brief description. It appears to be an exploded diagram or parts list for the complete disassembly and reassembly of the engine.
Mc cormick x5 series t4i (2014 ) - rs28 - x5.30 tractor service repair manualufjjsejfkskemme
This document provides information on engine components for an X5 Series T4i engine from 2014. It lists 70 individual engine components, identified by reference number and name. For each component, it specifies the part number and quantity required. Some components note that they are not serviced or are for replacement purposes only. The document provides an exploded diagram-style breakdown of engine parts.
Mc cormick x4 series (2014 ) - rs52 - x4.50 tractor service repair manualufjjsejfkskemme
This document provides parts information for a Deutz tcd 3.6 l4 - 62.5 kw engine. It includes images and part numbers for various engine components such as filters, sensors, bolts, pipes, and other parts. Contact the spare parts department for assistance.
Mc cormick vf n series restyling (2010- ) - rp05 - v90 tractor service repair...ufjjsejfkskemme
This document provides parts information for various engine components. It lists part numbers, descriptions, and other technical details. Key information includes:
- It covers components for engines with serial numbers U056074 t2 and U056075 t1.
- The parts include cylinders, pistons, gears, pumps, and other engine internals.
- Specifications like part quantity, material, and application are provided for each part listed.
Mc cormick v series cab tier 3 new generation (2007 2009) - rp04 - 75 tractor...ufjjsejfkskemme
This document provides component part information for the repair of a Perkins XL75075 75hp engine. It includes images and descriptions of individual engine parts such as the cylinder block, cylinder head, camshaft, pistons, and other internal engine components. Specifications like part numbers, quantity needed, and application details are provided for each part.
Mc cormick t series tier 3 (2007 2010) - cp02 - t 90 f-m-c tractor service re...ufjjsejfkskemme
This document provides a list of engine components for a McCormick-Deering T series tier 3 engine from 2007-2010. It includes part numbers, descriptions, serial number ranges and replacement part numbers. The components listed are for the cylinder block, pistons, crankshaft, camshaft, valves, fuel pump and other internal engine parts. Replacement instructions, shim details and color coding are also provided for some items.
Mc cormick t series tier 2 (2003 2007) - cp01 - t 95 f-m-t tractor service re...ufjjsejfkskemme
This document provides component part information for replacing and overhauling parts for Tier 2 engine models from 2003-2007. It includes lists of components with part numbers, replacement kits, and notes on application and serial number ranges.
Mc cormick t series restyling (2011 ) - cp03 - t80 f-m tractor service repai...ufjjsejfkskemme
This document contains parts listings and diagrams for engine components. It includes lists of parts with identification numbers, quantities, and replacement information. The parts are associated with the T series engine restyling from 2011 for the CP03 T 80 f-m tractor model.
Mc cormick t series compact (2001 2009) - ct00 - t70 f tractor service repair...ufjjsejfkskemme
The document provides parts information for engine components for T Series Compact tractors from 2001-2009, including part numbers, descriptions, and images. It includes gaskets, plugs, cylinders, valves, springs, and other engine parts. The parts apply to different tiers or models of the tractors and some indicate they are part of larger assemblies.
Mc cormick mtx tier3 restyling (2009 ) - rpd1 - 145 tractor service repair m...ufjjsejfkskemme
This document contains parts lists and assembly diagrams for components of an engine. It includes lists of parts with identification numbers, names, quantities and other specifications. Reference is made to assemblies, replacement parts, markets and page numbers for additional information.
Kubota 03 m-di-e3 b series diesel engine service repair manualufjjsejfkskemme
The document provides information on workshop manuals for Kubota 03-M-E3B, 03-M-DI-E3B and 03-M-E3BG series diesel engines. It includes sections on general information, engine mechanisms, and servicing procedures. The general section covers identification, maintenance and special tools. The mechanisms section describes engine construction and functions. The servicing section provides troubleshooting, specification lists, disassembly and reassembly procedures. Safety instructions are also outlined.
Komatsu wh609 1 e0 telescopic handler service repair manual sn 395f61003 and upufjjsejfkskemme
This document provides service information for telescopic handlers models WH6-1E0, WH7-1E0, including:
- Sections on structure and function, testing and adjusting, and disassembly and assembly.
- Safety precautions for working on the equipment, including wearing protective equipment and blocking parts before servicing.
- Instructions on how to read the shop manual, including page numbering, additional pages, revisions, and safety symbols.
- Procedures for removing and installing components like the engine hood.
Komatsu wh609 1 telescopic handler service repair manual sn 395 f60001 and upufjjsejfkskemme
This document provides removal and installation instructions for various components of a telescopic handler model. It includes sections on removing and installing the engine hood, air filter, turbocharger, exhaust pipe, radiator assembly, muffler, battery, cylinder head, and other components. Removal and installation steps are provided for each component, typically involving disconnecting hoses, removing mounting hardware, and sometimes draining fluids before removing the part.
Komatsu wd600 3 wheel dozer service repair manual (sn 50001 and up)ufjjsejfkskemme
This shop manual provides specifications and repair instructions for the WD600-3 wheel dozer. It contains sections on structure and function, testing and adjusting, disassembly and assembly, maintenance standards, and others. The WD600-3 mounts a SAA6D170E-3 engine and has an operating weight of 42,900 kg. It has a blade width of 5,100 mm and maximum lift height of 1,500 mm. The manual provides the necessary technical information to perform operations in a service workshop for this machine model.
Komatsu wa270 pt 3 wheel loader service repair manual sn wa270h30051 and upufjjsejfkskemme
The document provides instructions for removing and installing an engine hood assembly and removing an engine on a wheel loader. Key steps include:
1. Disconnecting electrical and hydraulic connections and draining fluids before removal.
2. Removing mounting bolts, nuts and hoses to lift off the engine hood assembly.
3. Draining the coolant and removing hoses, fan guard, transmission connections, steering pump hoses and electrical wiring when removing the engine.
4. Carrying out reinstallation in reverse order and reconnecting all electrical, hydraulic and coolant connections. Precautions like using lifting equipment and releasing pressures are emphasized.
Komatsu wa270 3 wheel loader service repair manual sn wa270 h20051 and upufjjsejfkskemme
This document provides instructions for servicing a wheel loader, including:
1) Removing and installing the engine hood, which requires disconnecting wiring, hoses, and other components.
2) Removing and installing the engine, which has many steps including draining fluids, removing wiring, hoses, and mounting components.
3) Procedures for removing and installing other major components like the radiator, fuel tank, and counterweight. Detailed safety precautions and instructions are provided.
Komatsu wa250 pz 6 wheel loader service repair manual snh00051 and upufjjsejfkskemme
This document provides information about Komatsu wheel loaders, including:
- The shop manual covers models WA250-6 and WA250PZ-6.
- Specifications for the engines, cooling systems, power trains, steering systems, brake systems, hydraulics systems, and other components are included.
- Standard values, testing and adjustment procedures, and troubleshooting information is provided.
- Failure codes, fuse locations, and other diagnostic information is listed to help with repairs.
Komatsu wa250 pz 6 wheel loader service repair manual sn75160 and upufjjsejfkskemme
This document provides information about Komatsu wheel loaders, including:
- The shop manual covers models WA250-6 and WA250PZ-6.
- Specifications for the engines, cooling systems, power trains, steering systems, brake systems, undercarriages, hydraulic systems, work equipment, and electrical systems are provided.
- Standard values, testing and adjusting procedures, and troubleshooting information for various components are included.
- Failure codes, fuse locations, and troubleshooting tips and procedures are listed to assist with repairs.
Komatsu wa250 pz 6 wheel loader service repair manual sn75001 and upufjjsejfkskemme
This document provides a table of contents for a shop manual covering maintenance and repair of a wheel loader. The summary includes:
- The document is a table of contents for a shop manual covering various systems of a wheel loader including the engine, power train, steering, brakes, undercarriage, hydraulics, work equipment, cab, and electrical systems.
- The table of contents lists over 100 sections organized into topics such as specifications, structure and function, testing and adjusting procedures, standard values, troubleshooting, and failure codes.
- The sections provide information on maintenance, repair, testing and adjusting various components of the wheel loader such as the engine, transmission, hydraulics, brakes,
Kobelco 80 cs 2 acera hydraulic excavator service repair manualufjjsejfkskemme
This document is a service manual for a hydraulic excavator that contains 7 sections: specifications, maintenance, systems, disassembly, troubleshooting, engine, and installing options. It provides general safety information and precautions for operating and servicing the excavator. Some key points include wearing protective equipment, relieving pressure from systems before disconnecting lines, lowering attachments to the ground before working, and using lifting equipment for heavy components.
John deere trs21 e walk behind snowthrowers & snowblowers service repair ...ufjjsejfkskemme
This technical manual provides service information for John Deere TRS21/21E/22/24/26/27/32 and TRX24/26 walk-behind snowthrowers and snowblowers. The manual is intended for experienced technicians and contains safety messages, specifications, repair instructions, and diagnostic procedures organized into sections by machine and component. Safety must be the top priority when working on or operating the equipment.
John deere trs21 walk behind snowthrowers & snowblowers service repair ma...ufjjsejfkskemme
This technical manual provides service information for John Deere TRS21/21E/22/24/26/27/32 and TRX24/26 walk-behind snowthrowers and snowblowers. The manual is intended for experienced technicians and contains safety messages, specifications, repair instructions, and diagnostic procedures organized into various sections and groups. Safety must always be the top priority when working on or operating equipment.
John deere se6300 tractors service repair technical manual (tm4493)ufjjsejfkskemme
This document provides instructions for adjusting the cone point on differentials for 6100 to 6600 tractors. It involves measuring specific dimensions, calculating the required spacer washer thickness, and selecting the appropriate washers. The final section lists some special tools needed for tasks like tilting the cab, supporting the tractor during wheel removal, and removing/installing shafts.
John deere se6200 tractors service repair technical manual (tm4493)ufjjsejfkskemme
This document provides instructions for adjusting the shift mechanism on tm4493 tractors from 6100 to 6600 models. It involves the following steps:
1. Place the shifter shafts in the neutral position.
2. Adjust the shifter forks using threaded pins until they are centered in relation to the shift collars.
3. Move the shifter forks to all positions and ensure smooth shifting without binding or overlap between positions. Tighten locknuts on threaded pins to complete the adjustment.
John deere se6100 tractors service repair technical manual (tm4493)ufjjsejfkskemme
This document provides instructions for adjusting the shift mechanism on tm4493 tractors from 6100 to 6600 models. It involves the following steps:
1. Place the shifter shafts in the neutral position.
2. Adjust the shifter forks using threaded pins until they are centered in relation to the shift collars.
3. Move the shifter forks to all positions and ensure smooth shifting without binding or overlap between positions. Tighten locknuts on threaded pins to complete the adjustment.
Mc cormick t series tier 3 (2007 2010) - cp02 - t 90 f-m-c tractor service re...ufjjsejfkskemme
This document provides a list of engine components for a McCormick-Deering T series tier 3 engine from 2007-2010. It includes part numbers, descriptions, serial number ranges and replacement part numbers. The components listed are for the cylinder block, pistons, crankshaft, camshaft, valves, fuel pump and other internal engine parts. Replacement instructions, shim details and color coding are also provided for some items.
Mc cormick t series tier 2 (2003 2007) - cp01 - t 95 f-m-t tractor service re...ufjjsejfkskemme
This document provides component part information for replacing and overhauling parts for Tier 2 engine models from 2003-2007. It includes lists of components with part numbers, replacement kits, and notes on application and serial number ranges.
Mc cormick t series restyling (2011 ) - cp03 - t80 f-m tractor service repai...ufjjsejfkskemme
This document contains parts listings and diagrams for engine components. It includes lists of parts with identification numbers, quantities, and replacement information. The parts are associated with the T series engine restyling from 2011 for the CP03 T 80 f-m tractor model.
Mc cormick t series compact (2001 2009) - ct00 - t70 f tractor service repair...ufjjsejfkskemme
The document provides parts information for engine components for T Series Compact tractors from 2001-2009, including part numbers, descriptions, and images. It includes gaskets, plugs, cylinders, valves, springs, and other engine parts. The parts apply to different tiers or models of the tractors and some indicate they are part of larger assemblies.
Mc cormick mtx tier3 restyling (2009 ) - rpd1 - 145 tractor service repair m...ufjjsejfkskemme
This document contains parts lists and assembly diagrams for components of an engine. It includes lists of parts with identification numbers, names, quantities and other specifications. Reference is made to assemblies, replacement parts, markets and page numbers for additional information.
Kubota 03 m-di-e3 b series diesel engine service repair manualufjjsejfkskemme
The document provides information on workshop manuals for Kubota 03-M-E3B, 03-M-DI-E3B and 03-M-E3BG series diesel engines. It includes sections on general information, engine mechanisms, and servicing procedures. The general section covers identification, maintenance and special tools. The mechanisms section describes engine construction and functions. The servicing section provides troubleshooting, specification lists, disassembly and reassembly procedures. Safety instructions are also outlined.
Komatsu wh609 1 e0 telescopic handler service repair manual sn 395f61003 and upufjjsejfkskemme
This document provides service information for telescopic handlers models WH6-1E0, WH7-1E0, including:
- Sections on structure and function, testing and adjusting, and disassembly and assembly.
- Safety precautions for working on the equipment, including wearing protective equipment and blocking parts before servicing.
- Instructions on how to read the shop manual, including page numbering, additional pages, revisions, and safety symbols.
- Procedures for removing and installing components like the engine hood.
Komatsu wh609 1 telescopic handler service repair manual sn 395 f60001 and upufjjsejfkskemme
This document provides removal and installation instructions for various components of a telescopic handler model. It includes sections on removing and installing the engine hood, air filter, turbocharger, exhaust pipe, radiator assembly, muffler, battery, cylinder head, and other components. Removal and installation steps are provided for each component, typically involving disconnecting hoses, removing mounting hardware, and sometimes draining fluids before removing the part.
Komatsu wd600 3 wheel dozer service repair manual (sn 50001 and up)ufjjsejfkskemme
This shop manual provides specifications and repair instructions for the WD600-3 wheel dozer. It contains sections on structure and function, testing and adjusting, disassembly and assembly, maintenance standards, and others. The WD600-3 mounts a SAA6D170E-3 engine and has an operating weight of 42,900 kg. It has a blade width of 5,100 mm and maximum lift height of 1,500 mm. The manual provides the necessary technical information to perform operations in a service workshop for this machine model.
Komatsu wa270 pt 3 wheel loader service repair manual sn wa270h30051 and upufjjsejfkskemme
The document provides instructions for removing and installing an engine hood assembly and removing an engine on a wheel loader. Key steps include:
1. Disconnecting electrical and hydraulic connections and draining fluids before removal.
2. Removing mounting bolts, nuts and hoses to lift off the engine hood assembly.
3. Draining the coolant and removing hoses, fan guard, transmission connections, steering pump hoses and electrical wiring when removing the engine.
4. Carrying out reinstallation in reverse order and reconnecting all electrical, hydraulic and coolant connections. Precautions like using lifting equipment and releasing pressures are emphasized.
Komatsu wa270 3 wheel loader service repair manual sn wa270 h20051 and upufjjsejfkskemme
This document provides instructions for servicing a wheel loader, including:
1) Removing and installing the engine hood, which requires disconnecting wiring, hoses, and other components.
2) Removing and installing the engine, which has many steps including draining fluids, removing wiring, hoses, and mounting components.
3) Procedures for removing and installing other major components like the radiator, fuel tank, and counterweight. Detailed safety precautions and instructions are provided.
Komatsu wa250 pz 6 wheel loader service repair manual snh00051 and upufjjsejfkskemme
This document provides information about Komatsu wheel loaders, including:
- The shop manual covers models WA250-6 and WA250PZ-6.
- Specifications for the engines, cooling systems, power trains, steering systems, brake systems, hydraulics systems, and other components are included.
- Standard values, testing and adjustment procedures, and troubleshooting information is provided.
- Failure codes, fuse locations, and other diagnostic information is listed to help with repairs.
Komatsu wa250 pz 6 wheel loader service repair manual sn75160 and upufjjsejfkskemme
This document provides information about Komatsu wheel loaders, including:
- The shop manual covers models WA250-6 and WA250PZ-6.
- Specifications for the engines, cooling systems, power trains, steering systems, brake systems, undercarriages, hydraulic systems, work equipment, and electrical systems are provided.
- Standard values, testing and adjusting procedures, and troubleshooting information for various components are included.
- Failure codes, fuse locations, and troubleshooting tips and procedures are listed to assist with repairs.
Komatsu wa250 pz 6 wheel loader service repair manual sn75001 and upufjjsejfkskemme
This document provides a table of contents for a shop manual covering maintenance and repair of a wheel loader. The summary includes:
- The document is a table of contents for a shop manual covering various systems of a wheel loader including the engine, power train, steering, brakes, undercarriage, hydraulics, work equipment, cab, and electrical systems.
- The table of contents lists over 100 sections organized into topics such as specifications, structure and function, testing and adjusting procedures, standard values, troubleshooting, and failure codes.
- The sections provide information on maintenance, repair, testing and adjusting various components of the wheel loader such as the engine, transmission, hydraulics, brakes,
Kobelco 80 cs 2 acera hydraulic excavator service repair manualufjjsejfkskemme
This document is a service manual for a hydraulic excavator that contains 7 sections: specifications, maintenance, systems, disassembly, troubleshooting, engine, and installing options. It provides general safety information and precautions for operating and servicing the excavator. Some key points include wearing protective equipment, relieving pressure from systems before disconnecting lines, lowering attachments to the ground before working, and using lifting equipment for heavy components.
John deere trs21 e walk behind snowthrowers & snowblowers service repair ...ufjjsejfkskemme
This technical manual provides service information for John Deere TRS21/21E/22/24/26/27/32 and TRX24/26 walk-behind snowthrowers and snowblowers. The manual is intended for experienced technicians and contains safety messages, specifications, repair instructions, and diagnostic procedures organized into sections by machine and component. Safety must be the top priority when working on or operating the equipment.
John deere trs21 walk behind snowthrowers & snowblowers service repair ma...ufjjsejfkskemme
This technical manual provides service information for John Deere TRS21/21E/22/24/26/27/32 and TRX24/26 walk-behind snowthrowers and snowblowers. The manual is intended for experienced technicians and contains safety messages, specifications, repair instructions, and diagnostic procedures organized into various sections and groups. Safety must always be the top priority when working on or operating equipment.
John deere se6300 tractors service repair technical manual (tm4493)ufjjsejfkskemme
This document provides instructions for adjusting the cone point on differentials for 6100 to 6600 tractors. It involves measuring specific dimensions, calculating the required spacer washer thickness, and selecting the appropriate washers. The final section lists some special tools needed for tasks like tilting the cab, supporting the tractor during wheel removal, and removing/installing shafts.
John deere se6200 tractors service repair technical manual (tm4493)ufjjsejfkskemme
This document provides instructions for adjusting the shift mechanism on tm4493 tractors from 6100 to 6600 models. It involves the following steps:
1. Place the shifter shafts in the neutral position.
2. Adjust the shifter forks using threaded pins until they are centered in relation to the shift collars.
3. Move the shifter forks to all positions and ensure smooth shifting without binding or overlap between positions. Tighten locknuts on threaded pins to complete the adjustment.
John deere se6100 tractors service repair technical manual (tm4493)ufjjsejfkskemme
This document provides instructions for adjusting the shift mechanism on tm4493 tractors from 6100 to 6600 models. It involves the following steps:
1. Place the shifter shafts in the neutral position.
2. Adjust the shifter forks using threaded pins until they are centered in relation to the shift collars.
3. Move the shifter forks to all positions and ensure smooth shifting without binding or overlap between positions. Tighten locknuts on threaded pins to complete the adjustment.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
4. SAFETY
1 - 2 9/27/99
RECOGNIZE SAFETY INFORMATION
This is the safety-alert symbol. When you see this sym-
bol on your machine or in this manual, be alert to the po-
tential for personal injury.
Follow recommended precautions and safe servicing
practices.
Understand Signal Words
A signal word—DANGER, WARNING, or CAUTION—is
used with the safety-alert symbol. DANGER identifies
the most serious hazards.
DANGER or WARNING safety signs are located near
specific hazards. General precautions are listed on
CAUTION safety signs. CAUTION also calls attention to
safety messages in this manual.
REPLACE SAFETY SIGNS
Replace missing or damaged safety signs. See the ma-
chine operator’s manual for correct safety sign place-
ment.
HANDLE FLUIDS SAFELY-AVOID
FIRES
Be Prepared For Emergencies
When you work around fuel, do not smoke or work near
heaters or other fire hazards.
Store flammable fluids away from fire hazards. Do not
incinerate or puncture pressurized containers.
Make sure machine is clean of trash, grease, and de-
bris.
Do not store oily rags; they can ignite and burn sponta-
neously.
Be prepared if a fire starts.
Keep a first aid kit and fire extinguisher handy.
Keep emergency numbers for doctors, ambulance ser-
vice, hospital, and fire department near your telephone.
5. SAFETY
9/27/99 1 - 3
USE CARE IN HANDLING AND
SERVICING BATTERIES
Prevent Battery Explosions
• Keep sparks, lighted matches, and open flame
away from the top of battery. Battery gas can
explode.
• Never check battery charge by placing a metal
object across the posts. Use a volt-meter or
hydrometer.
• Do not charge a frozen battery; it may explode.
Warm battery to 16°C (60°F).
Prevent Acid Burns
• Sulfuric acid in battery electrolyte is poisonous. It is
strong enough to burn skin, eat holes in clothing,
and cause blindness if splashed into eyes.
• Avoid acid burns by:
1. Filling batteries in a well-ventilated area.
2. Wearing eye protection and rubber gloves.
3. Avoiding breathing fumes when electrolyte is
added.
4. Avoiding spilling or dripping electrolyte.
5. Use proper jump start procedure.
• If you spill acid on yourself:
1. Flush your skin with water.
2. Apply baking soda or lime to help neutralize the
acid.
3. Flush your eyes with water for 10—15 minutes.
4. Get medical attention immediately.
• If acid is swallowed:
1. Drink large amounts of water or milk.
2. Then drink milk of magnesia, beaten eggs, or
vegetable oil.
3. Get medical attention immediately.
USE CARE AROUND HIGH-
PRESSURE FLUID LINES
Avoid High-pressure Fluids
Escaping fluid under pressure can penetrate the skin
causing serious injury.
Avoid injury from escaping fluid under pressure by stop-
ping the engine and relieving pressure in the system be-
fore disconnecting or connecting hydraulic or other
lines. Tighten all connections before applying pressure.
Search for leaks with a piece of cardboard. Protect
hands and body from high pressure fluids.
If an accident occurs, see a doctor immediately. Any flu-
id injected into the skin must be surgically removed
within a few hours or gangrene may result. Doctors un-
familiar with this type of injury should reference a knowl-
edgeable medical source. Such information is available
from Deere & Company Medical Department in Moline,
Illinois, U.S.A.
Avoid Heating Near Pressurized
Fluid Lines
Flammable spray can be generated by heating near
pressurized fluid lines, resulting in severe burns to your-
self and bystanders. Do not heat by welding, soldering,
or using a torch near pressurized fluid lines or other
flammable materials. Pressurized lines can be acciden-
tally cut when heat goes beyond the immediate flame
area.
6. SAFETY
1 - 4 9/27/99
USE SAFE SERVICE PROCEDURES
Wear Protective Clothing
Wear close fitting clothing and safety equipment appro-
priate to the job.
Prolonged exposure to loud noise can cause impair-
ment or loss of hearing. Wear a suitable hearing protec-
tive device such as earmuffs or earplugs to protect
against objectionable or uncomfortable loud noises.
Operating equipment safely requires the full attention of
the operator. Do not wear radio or music headphones
while operating machine.
Service Machines Safely
Tie long hair behind your head. Do not wear a necktie,
scarf, loose clothing, or necklace when you work near
machine tools or moving parts. If these items were to
get caught, severe injury could result.
Remove rings and other jewelry to prevent electrical
shorts and entanglement in moving parts.
Use Proper Tools
Use tools appropriate to the work. Makeshift tools and
procedures can create safety hazards. Use power tools
only to loosen threaded parts and fasteners. For loosen-
ing and tightening hardware, use the correct size tools.
DO NOT use U.S. measurement tools on metric fasten-
ers. Avoid bodily injury caused by slipping wrenches.
Use only service parts meeting John Deere specifica-
tions.
Park Machine Safely
Before working on the machine:
1. Lower all equipment to the ground.
2. Stop the engine and remove the key.
3. Disconnect the battery ground strap.
4. Hang a “DO NOT OPERATE” tag in operator
station.
Support Machine Properly And Use
Proper Lifting Equipment
If you must work on a lifted machine or attachment, se-
curely support the machine or attachment.
Do not support the machine on cinder blocks, hollow
tiles, or props that may crumble under continuous load.
Do not work under a machine that is supported solely by
a jack. Follow recommended procedures in this manual.
Lifting heavy components incorrectly can cause severe
injury or machine damage. Follow recommended proce-
dure for removal and installation of components in the
manual.
Work In Clean Area
Before starting a job:
1. Clean work area and machine.
2. Make sure you have all necessary tools to do your
job.
3. Have the right parts on hand.
4. Read all instructions thoroughly; do not attempt
shortcuts.
7. SAFETY
9/27/99 1 - 5
Using High Pressure Washers
Directing pressurized water at electronic/electrical com-
ponents or connectors, bearings, hydraulic seals, fuel
injection pumps or other sensitive parts and compo-
nents may cause product malfunctions. Reduce pres-
sure and spray at a 45 to 90 degree angle.
Illuminate Work Area Safely
Illuminate your work area adequately but safely. Use a
portable safety light for working inside or under the ma-
chine. Make sure the bulb is enclosed by a wire cage.
The hot filament of an accidentally broken bulb can ig-
nite spilled fuel or oil.
Work In Ventilated Area
Engine exhaust fumes can cause sickness or death. If it
is necessary to run an engine in an enclosed area, re-
move the exhaust fumes from the area with an exhaust
pipe extension.
If you do not have an exhaust pipe extension, open the
doors and get outside air into the area.
WARNING: California Proposition 65
Warning
Diesel engine exhaust and some of its constituents are
known to the State of California to cause cancer, birth
defects, and other reproductive harm.
Gasoline engine exhaust from this product contains
chemicals known to the State of California to cause can-
cer, birth defects, or other reproductive harm.
Remove Paint Before Welding Or
Heating
Avoid potentially toxic fumes and dust. Hazardous
fumes can be generated when paint is heated by weld-
ing, soldering, or using a torch. Do all work outside or in
a well ventilated area. Dispose of paint and solvent
properly. Remove paint before welding or heating: If you
sand or grind paint, avoid breathing the dust. Wear an
approved respirator. If you use solvent or paint stripper,
remove stripper with soap and water before welding.
Remove solvent or paint stripper containers and other
flammable material from area. Allow fumes to disperse
at least 15 minutes before welding or heating.
Avoid Harmful Asbestos Dust
Avoid breathing dust that may be generated when han-
dling components containing asbestos fibers. Inhaled
asbestos fibers may cause lung cancer.
Components in products that may contain asbestos fi-
bers are brake pads, brake band and lining assemblies,
clutch plates, and some gaskets. The asbestos used in
these components is usually found in a resin or sealed
in some way. Normal handling is not hazardous as long
as airborne dust containing asbestos is not generated.
Avoid creating dust. Never use compressed air for
cleaning. Avoid brushing or grinding material containing
asbestos. When servicing, wear an approved respira-
tor. A special vacuum cleaner is recommended to clean
asbestos. If not available, apply a mist of oil or water on
the material containing asbestos. Keep bystanders
away from the area.
SERVICE TIRES SAFELY
Explosive separation of a tire and rim parts can cause
serious injury or death.
Do not attempt to mount a tire unless you have the prop-
er equipment and experience to perform the job. Always
maintain the correct tire pressure. Do not inflate the tires
above the recommended pressure. Never weld or heat
a wheel and tire assembly. The heat can cause an in-
crease in air pressure resulting in a tire explosion. Weld-
ing can structurally weaken or deform the wheel.
When inflating tires, use a clip-on chuck and extension
hose long enough to allow you to stand to one side and
NOT in front of or over the tire assembly. Use a safety
cage if available.
Check wheels for low pressure, cuts, bubbles, damaged
rims or missing lug bolts and nuts.
8. SAFETY
1 - 6 9/27/99
AVOID INJURY FROM ROTATING
BLADES, AUGERS AND PTO
SHAFTS
Keep hands and feet away while machine is running.
Shut off power to service, lubricate or remove mower
blades, augers or PTO shafts.
HANDLE CHEMICAL PRODUCTS
SAFELY
Direct exposure to hazardous chemicals can cause se-
rious injury. Potentially hazardous chemicals used with
John Deere equipment include such items as lubricants,
coolants, paints, and adhesives.
A Material Safety Data Sheet (MSDS) provides specific
details on chemical products: physical and health haz-
ards, safety procedures, and emergency response
techniques. Check the MSDS before you start any job
using a hazardous chemical. That way you will know ex-
actly what the risks are and how to do the job safely.
Then follow procedures and recommended equipment.
Dispose of Waste Properly
Improperly disposing of waste can threaten the environ-
ment and ecology. Potentially harmful waste used with
John Deere equipment include such items as oil, fuel,
coolant, brake fluid, filters, and batteries. Use leakproof
containers when draining fluids. Do not use food or bev-
erage containers that may mislead someone into drink-
ing from them. Do not pour waste onto the ground,
down a drain, or into any water source. Inquire on the
proper way to recycle or dispose of waste from your lo-
cal environmental or recycling center, or from your John
Deere dealer.
LIVE WITH SAFETY
Before returning machine to customer, make sure ma-
chine is functioning properly, especially the safety sys-
tems. Install all guards and shields.
9. 5 - 18 9/24/99
CHECKS, TESTS AND ADJUSTMENTS HYDROSTATIC POWER TRAIN
CHECKS, TESTS AND
ADJUSTMENTS
HYDRAULIC SYSTEM BLEEDING
PROCEDURE
Reason:
To ensure that air is purged from the hydraulic system
after the hydraulic hoses have been disconnected.
Procedure:
1. Park machine safely.
2. Check level of hydraulic oil. Add oil as needed.
(See HYDROSTATIC TRANSMISSION AND
HYDRAULIC OIL—NORTH AMERICA in
SPECIFICATIONS AND INFORMATION section.)
3. Start engine and run at SLOW idle (1200 ±75 rpm).
4. Drive machine forward approximately 20 feet, then
make two hard left turns, then make two hard right
turns.
5. Drive the machine in reverse approximately 10 feet.
6. Turn key switch to STOP position.
7. Check all hoses and connections for leaks. Tighten
connections and/or replace hoses as needed.
8. Check oil level at hydraulic oil reservoir. Add oil as
needed.
CONTROL LINKAGE CHECK AND
ADJUSTMENT
Reason:
To ensure that the machine does not move when the
control levers are in the NEUTRAL position, while the
engine is running.
Check Procedure:
1. Park machine safely.
2. Move PTO switch to OFF position.
3. With the operator on the seat, start engine.
4. Move throttle lever to half-speed position (A).
5. Release park brake.
6. Observe the drive wheels, the wheels should not
move.
Results:
If movement is noted, perform Adjustment
Procedure.
c CAUTION
Engine exhaust fumes can cause sickness or
death.
If it is necessary to run an engine in an enclosed
area, use an exhaust pipe extension to remove
the fumes.
Always try to work in a well-ventilated area.
c CAUTION
Engine exhaust fumes can cause sickness or
death.
If it is necessary to run an engine in an enclosed
area, use an exhaust pipe extension to remove
the fumes.
Always try to work in a well-ventilated area.
M1812
A
10. 9/24/99 5 - 19
HYDROSTATIC POWER TRAIN CHECKS, TESTS AND ADJUSTMENTS
Adjustment Procedure:
1. Turn ignition switch to STOP position.
2. Adjust the operator seat to the rearmost position.
3. Engage the park brake.
4. Move control levers (B) to NEUTRAL LOCK
position.
5. Raise and latch seat platform.
NOTE: The operator seat must be adjusted completely
to the rear to allow access to the console
controls when the seat is tilted forward.
The cap screw (D) and nut (C) should allow the
support rod (E) to roll and pivot freely to ensure
proper operation.
6. Remove lock nut (C), cap screw (D) and support
rod (E) from the seat bracket.
7. Tilt the seat forward and allow to rest against the
vehicle frame.
NOTE: The rear wheels must be able to rotate freely.
8. Use a safe lifting device to raise the rear of the
machine. Support the machine using wood blocks
or jackstands.
NOTE: To prevent damage to the seat bottom, cover
the end of the wood block with a rag.
9. Place a 25—30 cm (10—12 in.) long wood block (E)
between the foot plate and the center of the seat
bottom to activate the seat safety switch.
10. Locate the left (F) and right (G) control linkages.
M98138A
B B
M98085
D
E
C
MX1810
E
MX1644
G
F
11. 5 - 20 9/24/99
CHECKS, TESTS AND ADJUSTMENTS HYDROSTATIC POWER TRAIN
NOTE: The hex nut at the front of the linkage has left-
hand threads.
11. Loosen the jam nuts (H and I) at the front and rear
of the linkage.
12. Start engine.
13. Move throttle lever to half-speed position.
14. Release park brake.
NOTE: The right and left control levers can be
adjusted independently.
15. Move the RIGHT control lever from the NEUTRAL
LOCK to the NEUTRAL position.
16. Adjust the RIGHT control linkage, by rotating the
double nuts clockwise (or counterclockwise) as
needed until no rotation is noted.
17. Move the RIGHT control lever completely forward in
the slot and then back to the NEUTRAL position.
18. Observe the drive wheels, no rotation should noted.
19. Move the RIGHT control lever completely rearward
in the slot.
NOTE: If the lever fails to return to the NEUTRAL
position and the drive wheels continue to
rotate, the reverse spring detent may need to
be adjusted. (See REVERSE SPRING
DETENT CHECK AND ADJUSTMENT.)
20. Release the control lever. The lever should return to
the NEUTRAL position, and the drive wheels
should stop. Repeat steps 15—20 as needed.
21. Perform steps 15—20 for the LEFT control lever
linkage.
22. Tighten the jam nuts at the front and rear of both
linkage rods.
23. Install lock nut, cap screw and support rod.
REVERSE SPRING DETENT CHECK
AND ADJUSTMENT
Reason:
To ensure that the controls levers return to the
NEUTRAL position.
Check Procedure:
1. Park machine safely.
2. Pull both control levers back to the REVERSE
position.
NOTE: The control levers should be centered in the
neutral slot and should be able to be moved to
the NEUTRAL LOCK position.
3. Release the levers, the levers should return to the
NEUTRAL position (lever centered in the
NEUTRAL LOCK slot [A]).
Results:
If control levers do not return as described, perform
Adjustment Procedure.
c CAUTION
Help prevent serious personal injury. Use
caution when performing this service
procedure. Keep hands, feet and clothing away
from rotating tires.
MX1813
I
H
MX1816
A
12. 9/24/99 5 - 21
HYDROSTATIC POWER TRAIN CHECKS, TESTS AND ADJUSTMENTS
Adjustment Procedure:
1. Adjust the operator seat to the rearmost position.
2. Move control levers to NEUTRAL LOCK position.
3. Raise and latch seat platform.
NOTE: The operator seat must be adjusted completely
to the rear to allow access to the console
controls when the seat is tilted forward.
The cap screw (C) and nut (B) should allow the
support rod (D) to roll and pivot freely to
ensure proper operation.
4. Remove lock nut (B), cap screw (C) and support rod
(D) from the seat bracket.
5. Tilt the seat forward and allow to rest against the
vehicle frame.
NOTE: Right and left control levers can be adjusted
independently.
6. Move the RIGHT control lever from the NEUTRAL
LOCK to the NEUTRAL position.
7. Pull the right control lever (E) to the rear until the
clevis pin (F) on the arm below the pivot shaft (G)
comes into contact with the rear of the slot (H).
A slight spring pressure should be felt.
8. Loosen jam nut (I) from the yoke (J).
9. Make sure that the clevis pin (F) is in contact with
the rear of the slot.
10. Apply slight rearward pressure to the right control
lever (E). Turn the head of the adjustment bolt (K)
clockwise (or counterclockwise) as needed until
the lever is centered in the neutral slot.
11. Tighten the jam nut (I) against the yoke (J).
12. Repeat adjustment procedure for the LEFT control
lever.
NOTE: When properly adjusted, the control levers will
return to the NEUTRAL position from the
REVERSE position and reverse movement will
stop when the control levers are released.
13. Check adjustment. (See Check Procedure.)
M98085
B
C
D
MX1935
E
F
G
H
MX1936
E
J
I
K
13. 5 - 22 9/24/99
CHECKS, TESTS AND ADJUSTMENTS HYDROSTATIC POWER TRAIN
CONTROL LEVER ALIGNMENT
CHECK AND ADJUSTMENT
Reason:
To align the control levers.
Check Procedure:
1. Park machine safely.
2. Move control levers (A) to NEUTRAL position.
3. Check lever alignment; levers should align with
approximately 3—6 mm (0.125—0.25 in.) gap (B)
between the levers. If adjustment is required
proceed to Adjustment Procedure.
Adjustment Procedure:
1. Loosen cap screws (C).
2. Slide both levers forward (or backward) as required,
until levers are aligned.
3. Tighten cap screws (C).
NOTE: If the ends of the levers touch when in the
NEUTRAL position, move the levers to the
NEUTRAL LOCK position and carefully bend
them outward. Move the levers to the
NEUTRAL position and check alignment.
4. Check lever alignment. (See Check Procedure.)
MX1817
A
MX1818
B
MX1819
C
14. 9/24/99 5 - 23
HYDROSTATIC POWER TRAIN REPAIR
REPAIR
OIL COOLER—
REMOVAL/INSTALLATION
1. Park machine safely.
2. Raise and latch seat platform.
NOTE: Hydraulic system oil capacity is approximately
7.6 L (2.0 gal.).
3. Disconnect oil line (A) at reservoir and drain
reservoir into a clean container.
IMPORTANT: Use a wrench to hold fitting on oil
cooler when loosening or tightening hose
connections, to prevent twisting the fitting.
4. Disconnect oil hose (B).
5. Remove four caps screws and nuts (C) (two each
side).
6. Remove oil cooler.
7. Inspect oil cooler. (See OIL COOLER—
INSPECTION.)
Installation is done in the reverse order of removal.
NOTE: Hydraulic oil drained from the system can be
reused if the oil is clean and free of
contaminates. Use a strainer when filling
reservoir.
• Fill hydraulic reservoir to correct level with oil of
proper specifications. (See HYDROSTATIC
TRANSMISSION AND HYDRAULIC OIL—NORTH
AMERICA in SPECIFICATIONS AND
INFORMATION section.)
• Bleed air from hydraulic system. (See HYDRAULIC
SYSTEM BLEEDING PROCEDURE.)
MX1905
A
MX1901
B
MX1902
C
MX1903
C
15. 5 - 24 9/24/99
REPAIR HYDROSTATIC POWER TRAIN
OIL COOLER—INSPECTION
1. Check oil cooler for debris lodged in the fins (A).
Clean oil cooler using compressed air or pressure
washer.
2. Inspect oil cooler for bent fins, cracks and damaged
seams. Repair or replace oil cooler as needed.
HYDRAULIC PUMP DRIVE BELT—
REMOVAL/INSTALLATION
1. Park machine safely.
2. Raise and latch seat platform.
3. Open rubber access door (A).
4. Relieve belt tension by using a pry bar to move the
belt tensioner bracket (B).
5. Remove the drive belt (C).
6. Inspect the belt for cracks, damage or signs of wear.
Replace as needed.
Installation is done in the reverse order of removal.
• Route belt around hydraulic pump sheaves (D),
PTO shaft sheave (E) and idler sheave (F).
c CAUTION
Reduce compressed air to less than 210 kPa
(2 bar) (30 psi) when using for cleaning
purposes. Clear area of bystanders, guard
against flying chips, and wear personal
protection equipment including eye protection.
MX1904
A
MX1820
A
MX1821
B
C
E
F
D
D
16. 9/24/99 5 - 25
HYDROSTATIC POWER TRAIN REPAIR
HYDRAULIC PUMP DRIVE BELT TENSIONER ASSEMBLY—REPAIR
A—Nut E—Cap Screw I—Washer M—Bushing
B—Washer F—Cap Screw J—Lubrication Fitting
C—Sheave G—Spring K—Nut
D—Tension Bracket H—Nut (2 Used) L—Cap Screw
MX1923
A
C
D
F
E
B
K
L
M
J
G
H
I
• Inspect all parts for wear or damage. Replace parts
as needed.
• Apply grease to lubrication fitting. (See CHASSIS
AND MOWER SPINDLE GREASE in
SPECIFICATIONS AND INFORMATION section.)
18. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
19. 9/24/99 5 - 27
HYDROSTATIC POWER TRAIN REPAIR
NOTE: Right control lever mechanism shown. Left
control lever mechanism is the same.
Quantities shown are per side.
• Inspect all parts for wear or damage. Replace parts
as needed.
• Adjust control lever height. (See CONTROL LEVER
HEIGHT ADJUSTMENT.)
• Adjust control linkage. (See CONTROL LINKAGE
CHECK AND ADJUSTMENT.)
1—Cap Screw (2 Used) 17—Nut (5 Used)
2—Dampener 18—Cotter Pin
3—Spacer (2 Used) 19—Washers (3 Used)
4—Bushing 20—Bearing (2 Used)
5—Spring 21—Cap Screw (4 Used)
6—Cap Screw 22—Lock Nut (2 Used)
7—Arm 23—Set Screw
8—Control Lever 24—Arm
9—Spring Washer
(2 Used)
25—Ball Joint
10—Cap Screw (2 Used) 26—Washer (2 Used)
11—Flanged Nut (2 Used) 27—Link
12—Lock Nut (7 Used) 28—Cap Screw (2 Used)
13—Pin 29—Cap Screw (3 Used)
14—Yoke 30—Ball Joint
15—Nut 31—Bracket
16—Washer
20. 5 - 28 9/24/99
REPAIR HYDROSTATIC POWER TRAIN
HYDRAULIC PUMPS—
REMOVAL/INSTALLATION
1. Remove drive wheel(s). (See DRIVE WHEELS—
REMOVAL/INSTALLATION in MISCELLANEOUS
section.)
2. Remove pump drive belt. (See HYDRAULIC PUMP
DRIVE BELT—REMOVAL/INSTALLATION.)
3. Right Pump Only: Remove two cap screws (A)
from oil filter bracket, and allow the oil filter to drop
down to provide clearance.
4. Remove cap screw (B), washer (C) and nut (D).
5. Disconnect linkage (E).
6. Disconnect hose (F).
7. Remove hydraulic pump-to-wheel motor hydraulic
lines (G).
8. Disconnect hose (H).
c CAUTION
Escaping fluid under pressure can penetrate the
skin causing serious injury. Avoid the hazard by
relieving pressure before disconnecting any
hoses. Tighten all connections before applying
pressure. Search for leaks with a piece of
cardboard. Protect hands and body from high
pressure fluids.
If an accident occurs, see a doctor immediately.
Any fluid injected into the skin must be removed
within a few hours or gangrene may result.
Doctors unfamiliar with this type of injury may
call Deere & Company Medical Department in
Moline, Illinois, or other knowledgeable medical
source.
MX1910
A
MX1911
B
C
D
EF
MX1912
G
MX1913
H