This document provides instructions for adjusting the shift mechanism on tm4493 tractors from 6100 to 6600 models. It involves the following steps:
1. Place the shifter shafts in the neutral position.
2. Adjust the shifter forks using threaded pins until they are centered in relation to the shift collars.
3. Move the shifter forks to all positions and ensure smooth shifting without binding or overlap between positions. Tighten locknuts on threaded pins to complete the adjustment.
Mc cormick x5 series t4i (2014 ) - rs28 - x5.50 tractor service repair manualufjjsejfkskemme
This document provides component part numbers and descriptions for an engine. It lists 71 individual parts for the engine in the X5 Series T4i model from 2014, including the cylinder block, cylinder head, pistons, rods, crankshaft, gears, pumps, sensors, hoses and other minor components. Each part is identified by a reference number, quantity, and brief description. It appears to be an exploded diagram or parts list for the complete disassembly and reassembly of the engine.
Mc cormick x5 series t4i (2014 ) - rs28 - x5.30 tractor service repair manualufjjsejfkskemme
This document provides information on engine components for an X5 Series T4i engine from 2014. It lists 70 individual engine components, identified by reference number and name. For each component, it specifies the part number and quantity required. Some components note that they are not serviced or are for replacement purposes only. The document provides an exploded diagram-style breakdown of engine parts.
Mc cormick x4 series (2014 ) - rs52 - x4.50 tractor service repair manualufjjsejfkskemme
This document provides parts information for a Deutz tcd 3.6 l4 - 62.5 kw engine. It includes images and part numbers for various engine components such as filters, sensors, bolts, pipes, and other parts. Contact the spare parts department for assistance.
Mc cormick vf n series restyling (2010- ) - rp05 - v90 tractor service repair...ufjjsejfkskemme
This document provides parts information for various engine components. It lists part numbers, descriptions, and other technical details. Key information includes:
- It covers components for engines with serial numbers U056074 t2 and U056075 t1.
- The parts include cylinders, pistons, gears, pumps, and other engine internals.
- Specifications like part quantity, material, and application are provided for each part listed.
Mc cormick v series cab tier 3 new generation (2007 2009) - rp04 - 75 tractor...ufjjsejfkskemme
This document provides component part information for the repair of a Perkins XL75075 75hp engine. It includes images and descriptions of individual engine parts such as the cylinder block, cylinder head, camshaft, pistons, and other internal engine components. Specifications like part numbers, quantity needed, and application details are provided for each part.
Mc cormick t series tier 3 (2007 2010) - cp02 - t 90 f-m-c tractor service re...ufjjsejfkskemme
This document provides a list of engine components for a McCormick-Deering T series tier 3 engine from 2007-2010. It includes part numbers, descriptions, serial number ranges and replacement part numbers. The components listed are for the cylinder block, pistons, crankshaft, camshaft, valves, fuel pump and other internal engine parts. Replacement instructions, shim details and color coding are also provided for some items.
Mc cormick t series tier 2 (2003 2007) - cp01 - t 95 f-m-t tractor service re...ufjjsejfkskemme
This document provides component part information for replacing and overhauling parts for Tier 2 engine models from 2003-2007. It includes lists of components with part numbers, replacement kits, and notes on application and serial number ranges.
Mc cormick t series restyling (2011 ) - cp03 - t80 f-m tractor service repai...ufjjsejfkskemme
This document contains parts listings and diagrams for engine components. It includes lists of parts with identification numbers, quantities, and replacement information. The parts are associated with the T series engine restyling from 2011 for the CP03 T 80 f-m tractor model.
Mc cormick x5 series t4i (2014 ) - rs28 - x5.50 tractor service repair manualufjjsejfkskemme
This document provides component part numbers and descriptions for an engine. It lists 71 individual parts for the engine in the X5 Series T4i model from 2014, including the cylinder block, cylinder head, pistons, rods, crankshaft, gears, pumps, sensors, hoses and other minor components. Each part is identified by a reference number, quantity, and brief description. It appears to be an exploded diagram or parts list for the complete disassembly and reassembly of the engine.
Mc cormick x5 series t4i (2014 ) - rs28 - x5.30 tractor service repair manualufjjsejfkskemme
This document provides information on engine components for an X5 Series T4i engine from 2014. It lists 70 individual engine components, identified by reference number and name. For each component, it specifies the part number and quantity required. Some components note that they are not serviced or are for replacement purposes only. The document provides an exploded diagram-style breakdown of engine parts.
Mc cormick x4 series (2014 ) - rs52 - x4.50 tractor service repair manualufjjsejfkskemme
This document provides parts information for a Deutz tcd 3.6 l4 - 62.5 kw engine. It includes images and part numbers for various engine components such as filters, sensors, bolts, pipes, and other parts. Contact the spare parts department for assistance.
Mc cormick vf n series restyling (2010- ) - rp05 - v90 tractor service repair...ufjjsejfkskemme
This document provides parts information for various engine components. It lists part numbers, descriptions, and other technical details. Key information includes:
- It covers components for engines with serial numbers U056074 t2 and U056075 t1.
- The parts include cylinders, pistons, gears, pumps, and other engine internals.
- Specifications like part quantity, material, and application are provided for each part listed.
Mc cormick v series cab tier 3 new generation (2007 2009) - rp04 - 75 tractor...ufjjsejfkskemme
This document provides component part information for the repair of a Perkins XL75075 75hp engine. It includes images and descriptions of individual engine parts such as the cylinder block, cylinder head, camshaft, pistons, and other internal engine components. Specifications like part numbers, quantity needed, and application details are provided for each part.
Mc cormick t series tier 3 (2007 2010) - cp02 - t 90 f-m-c tractor service re...ufjjsejfkskemme
This document provides a list of engine components for a McCormick-Deering T series tier 3 engine from 2007-2010. It includes part numbers, descriptions, serial number ranges and replacement part numbers. The components listed are for the cylinder block, pistons, crankshaft, camshaft, valves, fuel pump and other internal engine parts. Replacement instructions, shim details and color coding are also provided for some items.
Mc cormick t series tier 2 (2003 2007) - cp01 - t 95 f-m-t tractor service re...ufjjsejfkskemme
This document provides component part information for replacing and overhauling parts for Tier 2 engine models from 2003-2007. It includes lists of components with part numbers, replacement kits, and notes on application and serial number ranges.
Mc cormick t series restyling (2011 ) - cp03 - t80 f-m tractor service repai...ufjjsejfkskemme
This document contains parts listings and diagrams for engine components. It includes lists of parts with identification numbers, quantities, and replacement information. The parts are associated with the T series engine restyling from 2011 for the CP03 T 80 f-m tractor model.
Mc cormick t series compact (2001 2009) - ct00 - t70 f tractor service repair...ufjjsejfkskemme
The document provides parts information for engine components for T Series Compact tractors from 2001-2009, including part numbers, descriptions, and images. It includes gaskets, plugs, cylinders, valves, springs, and other engine parts. The parts apply to different tiers or models of the tractors and some indicate they are part of larger assemblies.
Mc cormick mtx tier3 restyling (2009 ) - rpd1 - 145 tractor service repair m...ufjjsejfkskemme
This document contains parts lists and assembly diagrams for components of an engine. It includes lists of parts with identification numbers, names, quantities and other specifications. Reference is made to assemblies, replacement parts, markets and page numbers for additional information.
Kubota 03 m-di-e3 b series diesel engine service repair manualufjjsejfkskemme
The document provides information on workshop manuals for Kubota 03-M-E3B, 03-M-DI-E3B and 03-M-E3BG series diesel engines. It includes sections on general information, engine mechanisms, and servicing procedures. The general section covers identification, maintenance and special tools. The mechanisms section describes engine construction and functions. The servicing section provides troubleshooting, specification lists, disassembly and reassembly procedures. Safety instructions are also outlined.
Komatsu wh609 1 e0 telescopic handler service repair manual sn 395f61003 and upufjjsejfkskemme
This document provides service information for telescopic handlers models WH6-1E0, WH7-1E0, including:
- Sections on structure and function, testing and adjusting, and disassembly and assembly.
- Safety precautions for working on the equipment, including wearing protective equipment and blocking parts before servicing.
- Instructions on how to read the shop manual, including page numbering, additional pages, revisions, and safety symbols.
- Procedures for removing and installing components like the engine hood.
Komatsu wh609 1 telescopic handler service repair manual sn 395 f60001 and upufjjsejfkskemme
This document provides removal and installation instructions for various components of a telescopic handler model. It includes sections on removing and installing the engine hood, air filter, turbocharger, exhaust pipe, radiator assembly, muffler, battery, cylinder head, and other components. Removal and installation steps are provided for each component, typically involving disconnecting hoses, removing mounting hardware, and sometimes draining fluids before removing the part.
Komatsu wd600 3 wheel dozer service repair manual (sn 50001 and up)ufjjsejfkskemme
This shop manual provides specifications and repair instructions for the WD600-3 wheel dozer. It contains sections on structure and function, testing and adjusting, disassembly and assembly, maintenance standards, and others. The WD600-3 mounts a SAA6D170E-3 engine and has an operating weight of 42,900 kg. It has a blade width of 5,100 mm and maximum lift height of 1,500 mm. The manual provides the necessary technical information to perform operations in a service workshop for this machine model.
Komatsu wa270 pt 3 wheel loader service repair manual sn wa270h30051 and upufjjsejfkskemme
The document provides instructions for removing and installing an engine hood assembly and removing an engine on a wheel loader. Key steps include:
1. Disconnecting electrical and hydraulic connections and draining fluids before removal.
2. Removing mounting bolts, nuts and hoses to lift off the engine hood assembly.
3. Draining the coolant and removing hoses, fan guard, transmission connections, steering pump hoses and electrical wiring when removing the engine.
4. Carrying out reinstallation in reverse order and reconnecting all electrical, hydraulic and coolant connections. Precautions like using lifting equipment and releasing pressures are emphasized.
Komatsu wa270 3 wheel loader service repair manual sn wa270 h20051 and upufjjsejfkskemme
This document provides instructions for servicing a wheel loader, including:
1) Removing and installing the engine hood, which requires disconnecting wiring, hoses, and other components.
2) Removing and installing the engine, which has many steps including draining fluids, removing wiring, hoses, and mounting components.
3) Procedures for removing and installing other major components like the radiator, fuel tank, and counterweight. Detailed safety precautions and instructions are provided.
Komatsu wa250 pz 6 wheel loader service repair manual snh00051 and upufjjsejfkskemme
This document provides information about Komatsu wheel loaders, including:
- The shop manual covers models WA250-6 and WA250PZ-6.
- Specifications for the engines, cooling systems, power trains, steering systems, brake systems, hydraulics systems, and other components are included.
- Standard values, testing and adjustment procedures, and troubleshooting information is provided.
- Failure codes, fuse locations, and other diagnostic information is listed to help with repairs.
Komatsu wa250 pz 6 wheel loader service repair manual sn75160 and upufjjsejfkskemme
This document provides information about Komatsu wheel loaders, including:
- The shop manual covers models WA250-6 and WA250PZ-6.
- Specifications for the engines, cooling systems, power trains, steering systems, brake systems, undercarriages, hydraulic systems, work equipment, and electrical systems are provided.
- Standard values, testing and adjusting procedures, and troubleshooting information for various components are included.
- Failure codes, fuse locations, and troubleshooting tips and procedures are listed to assist with repairs.
Komatsu wa250 pz 6 wheel loader service repair manual sn75001 and upufjjsejfkskemme
This document provides a table of contents for a shop manual covering maintenance and repair of a wheel loader. The summary includes:
- The document is a table of contents for a shop manual covering various systems of a wheel loader including the engine, power train, steering, brakes, undercarriage, hydraulics, work equipment, cab, and electrical systems.
- The table of contents lists over 100 sections organized into topics such as specifications, structure and function, testing and adjusting procedures, standard values, troubleshooting, and failure codes.
- The sections provide information on maintenance, repair, testing and adjusting various components of the wheel loader such as the engine, transmission, hydraulics, brakes,
Kobelco 80 cs 2 acera hydraulic excavator service repair manualufjjsejfkskemme
This document is a service manual for a hydraulic excavator that contains 7 sections: specifications, maintenance, systems, disassembly, troubleshooting, engine, and installing options. It provides general safety information and precautions for operating and servicing the excavator. Some key points include wearing protective equipment, relieving pressure from systems before disconnecting lines, lowering attachments to the ground before working, and using lifting equipment for heavy components.
John deere trs21 e walk behind snowthrowers & snowblowers service repair ...ufjjsejfkskemme
This technical manual provides service information for John Deere TRS21/21E/22/24/26/27/32 and TRX24/26 walk-behind snowthrowers and snowblowers. The manual is intended for experienced technicians and contains safety messages, specifications, repair instructions, and diagnostic procedures organized into sections by machine and component. Safety must be the top priority when working on or operating the equipment.
John deere trs21 walk behind snowthrowers & snowblowers service repair ma...ufjjsejfkskemme
This technical manual provides service information for John Deere TRS21/21E/22/24/26/27/32 and TRX24/26 walk-behind snowthrowers and snowblowers. The manual is intended for experienced technicians and contains safety messages, specifications, repair instructions, and diagnostic procedures organized into various sections and groups. Safety must always be the top priority when working on or operating equipment.
John deere se6300 tractors service repair technical manual (tm4493)ufjjsejfkskemme
This document provides instructions for adjusting the cone point on differentials for 6100 to 6600 tractors. It involves measuring specific dimensions, calculating the required spacer washer thickness, and selecting the appropriate washers. The final section lists some special tools needed for tasks like tilting the cab, supporting the tractor during wheel removal, and removing/installing shafts.
John deere se6100 tractors service repair technical manual (tm4493)ufjjsejfkskemme
This document provides instructions for adjusting the shift mechanism on tm4493 tractors from 6100 to 6600 models. It involves the following steps:
1. Place the shifter shafts in the neutral position.
2. Adjust the shifter forks using threaded pins until they are centered in relation to the shift collars.
3. Move the shifter forks to all positions and ensure smooth shifting without binding or overlap between positions. Tighten locknuts on threaded pins to complete the adjustment.
John deere pro gator utility vehicle 2030 service repair manual (tm1759)ufjjsejfkskemme
This technical manual provides instructions for servicing a ProGator Utility Vehicle. It contains sections covering general information, specifications, component locations, wiring diagrams, troubleshooting charts, and repair procedures. The manual is intended for experienced technicians and focuses on specific systems for this product. It is part of a total product support program from John Deere.
John deere pro gator utility vehicle 2020 service repair manual (tm1759)ufjjsejfkskemme
This technical manual provides instructions for servicing a ProGator Utility Vehicle. It begins with an introduction that explains the manual is written for experienced technicians and contains sections specific to the product. The manual sections include general diagnostic information, specifications, component locations, wiring diagrams, troubleshooting charts, repair instructions, and more. Technicians are asked to provide feedback to help improve the manual.
John deere mini frame z-trak 727 mower service repair manual (tm2043)ufjjsejfkskemme
This technical manual provides instructions for servicing the John Deere Mini-Frame Z-Trak 717 and 727. It begins with safety information and warnings. The introduction then describes the manual's contents and organization. It will cover specifications, identification numbers, component locations, schematics, theory of operation, diagnostics, testing, repairs and other sections as needed for the specific systems. Proper service requires following all safety procedures and using recommended tools and practices.
John deere mini frame z-trak 717 mower service repair manual (tm2043)ufjjsejfkskemme
This document provides general specifications for John Deere Z-Trak mowers including the engine, transmission, dimensions, and other details. The engine specifications listed are for Kawasaki FH601V and FH680V vertical shaft engines. Dimension and weight specifications are also provided. The document contains tables of standard torque specifications for metric and inch fasteners as well as recommendations for hydraulic fittings and O-rings. Fuel, oil, and lubricant specifications are listed along with storage and mixing guidelines. Serial number locations are identified.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Mc cormick t series compact (2001 2009) - ct00 - t70 f tractor service repair...ufjjsejfkskemme
The document provides parts information for engine components for T Series Compact tractors from 2001-2009, including part numbers, descriptions, and images. It includes gaskets, plugs, cylinders, valves, springs, and other engine parts. The parts apply to different tiers or models of the tractors and some indicate they are part of larger assemblies.
Mc cormick mtx tier3 restyling (2009 ) - rpd1 - 145 tractor service repair m...ufjjsejfkskemme
This document contains parts lists and assembly diagrams for components of an engine. It includes lists of parts with identification numbers, names, quantities and other specifications. Reference is made to assemblies, replacement parts, markets and page numbers for additional information.
Kubota 03 m-di-e3 b series diesel engine service repair manualufjjsejfkskemme
The document provides information on workshop manuals for Kubota 03-M-E3B, 03-M-DI-E3B and 03-M-E3BG series diesel engines. It includes sections on general information, engine mechanisms, and servicing procedures. The general section covers identification, maintenance and special tools. The mechanisms section describes engine construction and functions. The servicing section provides troubleshooting, specification lists, disassembly and reassembly procedures. Safety instructions are also outlined.
Komatsu wh609 1 e0 telescopic handler service repair manual sn 395f61003 and upufjjsejfkskemme
This document provides service information for telescopic handlers models WH6-1E0, WH7-1E0, including:
- Sections on structure and function, testing and adjusting, and disassembly and assembly.
- Safety precautions for working on the equipment, including wearing protective equipment and blocking parts before servicing.
- Instructions on how to read the shop manual, including page numbering, additional pages, revisions, and safety symbols.
- Procedures for removing and installing components like the engine hood.
Komatsu wh609 1 telescopic handler service repair manual sn 395 f60001 and upufjjsejfkskemme
This document provides removal and installation instructions for various components of a telescopic handler model. It includes sections on removing and installing the engine hood, air filter, turbocharger, exhaust pipe, radiator assembly, muffler, battery, cylinder head, and other components. Removal and installation steps are provided for each component, typically involving disconnecting hoses, removing mounting hardware, and sometimes draining fluids before removing the part.
Komatsu wd600 3 wheel dozer service repair manual (sn 50001 and up)ufjjsejfkskemme
This shop manual provides specifications and repair instructions for the WD600-3 wheel dozer. It contains sections on structure and function, testing and adjusting, disassembly and assembly, maintenance standards, and others. The WD600-3 mounts a SAA6D170E-3 engine and has an operating weight of 42,900 kg. It has a blade width of 5,100 mm and maximum lift height of 1,500 mm. The manual provides the necessary technical information to perform operations in a service workshop for this machine model.
Komatsu wa270 pt 3 wheel loader service repair manual sn wa270h30051 and upufjjsejfkskemme
The document provides instructions for removing and installing an engine hood assembly and removing an engine on a wheel loader. Key steps include:
1. Disconnecting electrical and hydraulic connections and draining fluids before removal.
2. Removing mounting bolts, nuts and hoses to lift off the engine hood assembly.
3. Draining the coolant and removing hoses, fan guard, transmission connections, steering pump hoses and electrical wiring when removing the engine.
4. Carrying out reinstallation in reverse order and reconnecting all electrical, hydraulic and coolant connections. Precautions like using lifting equipment and releasing pressures are emphasized.
Komatsu wa270 3 wheel loader service repair manual sn wa270 h20051 and upufjjsejfkskemme
This document provides instructions for servicing a wheel loader, including:
1) Removing and installing the engine hood, which requires disconnecting wiring, hoses, and other components.
2) Removing and installing the engine, which has many steps including draining fluids, removing wiring, hoses, and mounting components.
3) Procedures for removing and installing other major components like the radiator, fuel tank, and counterweight. Detailed safety precautions and instructions are provided.
Komatsu wa250 pz 6 wheel loader service repair manual snh00051 and upufjjsejfkskemme
This document provides information about Komatsu wheel loaders, including:
- The shop manual covers models WA250-6 and WA250PZ-6.
- Specifications for the engines, cooling systems, power trains, steering systems, brake systems, hydraulics systems, and other components are included.
- Standard values, testing and adjustment procedures, and troubleshooting information is provided.
- Failure codes, fuse locations, and other diagnostic information is listed to help with repairs.
Komatsu wa250 pz 6 wheel loader service repair manual sn75160 and upufjjsejfkskemme
This document provides information about Komatsu wheel loaders, including:
- The shop manual covers models WA250-6 and WA250PZ-6.
- Specifications for the engines, cooling systems, power trains, steering systems, brake systems, undercarriages, hydraulic systems, work equipment, and electrical systems are provided.
- Standard values, testing and adjusting procedures, and troubleshooting information for various components are included.
- Failure codes, fuse locations, and troubleshooting tips and procedures are listed to assist with repairs.
Komatsu wa250 pz 6 wheel loader service repair manual sn75001 and upufjjsejfkskemme
This document provides a table of contents for a shop manual covering maintenance and repair of a wheel loader. The summary includes:
- The document is a table of contents for a shop manual covering various systems of a wheel loader including the engine, power train, steering, brakes, undercarriage, hydraulics, work equipment, cab, and electrical systems.
- The table of contents lists over 100 sections organized into topics such as specifications, structure and function, testing and adjusting procedures, standard values, troubleshooting, and failure codes.
- The sections provide information on maintenance, repair, testing and adjusting various components of the wheel loader such as the engine, transmission, hydraulics, brakes,
Kobelco 80 cs 2 acera hydraulic excavator service repair manualufjjsejfkskemme
This document is a service manual for a hydraulic excavator that contains 7 sections: specifications, maintenance, systems, disassembly, troubleshooting, engine, and installing options. It provides general safety information and precautions for operating and servicing the excavator. Some key points include wearing protective equipment, relieving pressure from systems before disconnecting lines, lowering attachments to the ground before working, and using lifting equipment for heavy components.
John deere trs21 e walk behind snowthrowers & snowblowers service repair ...ufjjsejfkskemme
This technical manual provides service information for John Deere TRS21/21E/22/24/26/27/32 and TRX24/26 walk-behind snowthrowers and snowblowers. The manual is intended for experienced technicians and contains safety messages, specifications, repair instructions, and diagnostic procedures organized into sections by machine and component. Safety must be the top priority when working on or operating the equipment.
John deere trs21 walk behind snowthrowers & snowblowers service repair ma...ufjjsejfkskemme
This technical manual provides service information for John Deere TRS21/21E/22/24/26/27/32 and TRX24/26 walk-behind snowthrowers and snowblowers. The manual is intended for experienced technicians and contains safety messages, specifications, repair instructions, and diagnostic procedures organized into various sections and groups. Safety must always be the top priority when working on or operating equipment.
John deere se6300 tractors service repair technical manual (tm4493)ufjjsejfkskemme
This document provides instructions for adjusting the cone point on differentials for 6100 to 6600 tractors. It involves measuring specific dimensions, calculating the required spacer washer thickness, and selecting the appropriate washers. The final section lists some special tools needed for tasks like tilting the cab, supporting the tractor during wheel removal, and removing/installing shafts.
John deere se6100 tractors service repair technical manual (tm4493)ufjjsejfkskemme
This document provides instructions for adjusting the shift mechanism on tm4493 tractors from 6100 to 6600 models. It involves the following steps:
1. Place the shifter shafts in the neutral position.
2. Adjust the shifter forks using threaded pins until they are centered in relation to the shift collars.
3. Move the shifter forks to all positions and ensure smooth shifting without binding or overlap between positions. Tighten locknuts on threaded pins to complete the adjustment.
John deere pro gator utility vehicle 2030 service repair manual (tm1759)ufjjsejfkskemme
This technical manual provides instructions for servicing a ProGator Utility Vehicle. It contains sections covering general information, specifications, component locations, wiring diagrams, troubleshooting charts, and repair procedures. The manual is intended for experienced technicians and focuses on specific systems for this product. It is part of a total product support program from John Deere.
John deere pro gator utility vehicle 2020 service repair manual (tm1759)ufjjsejfkskemme
This technical manual provides instructions for servicing a ProGator Utility Vehicle. It begins with an introduction that explains the manual is written for experienced technicians and contains sections specific to the product. The manual sections include general diagnostic information, specifications, component locations, wiring diagrams, troubleshooting charts, repair instructions, and more. Technicians are asked to provide feedback to help improve the manual.
John deere mini frame z-trak 727 mower service repair manual (tm2043)ufjjsejfkskemme
This technical manual provides instructions for servicing the John Deere Mini-Frame Z-Trak 717 and 727. It begins with safety information and warnings. The introduction then describes the manual's contents and organization. It will cover specifications, identification numbers, component locations, schematics, theory of operation, diagnostics, testing, repairs and other sections as needed for the specific systems. Proper service requires following all safety procedures and using recommended tools and practices.
John deere mini frame z-trak 717 mower service repair manual (tm2043)ufjjsejfkskemme
This document provides general specifications for John Deere Z-Trak mowers including the engine, transmission, dimensions, and other details. The engine specifications listed are for Kawasaki FH601V and FH680V vertical shaft engines. Dimension and weight specifications are also provided. The document contains tables of standard torque specifications for metric and inch fasteners as well as recommendations for hydraulic fittings and O-rings. Fuel, oil, and lubricant specifications are listed along with storage and mixing guidelines. Serial number locations are identified.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa Warheit
John deere se6200 tractors service repair technical manual (tm4493)
1. tm4493 - 6100 to 6600 Tractors
Cone Point Adjustment
Cone Point Adjustment
LX000789-UN: Cone Point Adjustment
LEGEND:
A - Spacer washer (use as required)
B - Bearing quill
C - Axial bearing
D - Needle bearing
E - Differential drive shaft face
1. Record dimension (a) stamped into bevel gear face. In most cases this dimension is exactly 172,0 mm (6.772 in.).
2. Measure dimension (b) from needle bearing to bearing quill.
3. Cone point dimension (c) of differential housing is always 219,5 mm (8.642 in.).
4. Calculate spacer washer thickness (d).
d = a + b - c
-: Spacer Washer Thickness
Example:
-: Calculation Example
d = 172,0 mm + 48,1 mm - 219,5 mm
Thickness of Spacer Washers Available
0,2 mm (0.008 in.) 0,5 mm (0.020 in.)
0,3 mm (0.012 in.)
Dimension stamped into bevel gear face..............a=172,0 mm (6.772 in.)
Dimension from needle bearing to bearing quill, measured..............b=48,1 mm (1.894 in.)
Cone point dimension on differential housing as specified..............c=219,5 mm (8.642 in.)
1/11
2020/7/11file:///C:/ProgramData/Service%20ADVISOR/Temp/tm4493_LXOUOE00392...
2. d = 0,6 mm
d = 6.772 in. + 1.894 in. - 8.642 in.
d = 0.024 in.
In the example two 0,3 mm (0.012 in.) spacer washers have to be used.
LX000790-UN: Locking Latch and Taper Roller Bearing Cup
Press taper roller bearing cup (B) into bearing quill.
Install locking latch (A).
LX000791-UN: Tighten Screws and Bolt
Attach bearing quill.
Tighten screws (A and C) and bolt (B) to 55 N·m (40 lb-ft).
LX000792-UN: Install Shifter Shaft Housing
Install shifter shaft housing (A).
LX000793-UN: Install Spacer and Snap Ring
Install spacer [Older tractors only] (A).
2/11
2020/7/11file:///C:/ProgramData/Service%20ADVISOR/Temp/tm4493_LXOUOE00392...
3. Install snap ring (B).
LX000794-UN: Front Wheel Drive Gear and Snap Ring
Install front wheel drive gear (A) and snap ring (B).
LX009123-UN: Check Axial Play
Check axial play of front wheel drive gear.
NOTE:
Front wheel drive gear axial play must be less than 0.1 mm (0.004 in.).
If axial play is not correct, use a different size snap ring to install the front wheel drive gear.
-: Snap Ring Thickness
LX000795-UN: Install Thrust Washer and Snap Ring
Install thrust washer and gear of range A (A).
Install snap ring (B).
Thickness of Snap Rings Available
2.0 mm (0.079 in.) 2.2 mm (0.087 in.)
2.1 mm (0.083 in.) 2.3 mm (0.091 in.)
3/11
2020/7/11file:///C:/ProgramData/Service%20ADVISOR/Temp/tm4493_LXOUOE00392...
4. LX000796-UN: Install Synchronizer Unit and Snap Ring
Install synchronizer unit (B) and snap ring (A).
NOTE:
Axial play of synchronizer unit must be less than 0.1 mm (0.004 in.).
-: Snap Ring Thickness
LX000797-UN: Check Gear Axial Play
Check axial play of gear for range A.
IMPORTANT:
When measuring axial play, use both hands to guide the gear onto the shaft. Make sure the gear is straight (i.e. not skewed).
NOTE:
Axial play of gear must be 0.15 to 0.6 mm (0.006 to 0.024 in.).
If axial play is not correct, use a different size thrust washer to install gear of range A.
-: Thrust Washer Thickness
LX000798-UN: Snap Ring, Thrust Washer and Gear
Install gear of range B (C) and thrust washer (B).
Thickness of Snap Rings Available
2.0 mm (0.079 in.) 2.2 mm (0.087 in.)
2.1 mm (0.083 in.) 2.3 mm (0.091 in.)
Thickness of Thrust Washers Available
3.65 mm (0.144 in.) 3.95 mm (0.156 in.)
3.80 mm (0.150 in.)
4/11
2020/7/11file:///C:/ProgramData/Service%20ADVISOR/Temp/tm4493_LXOUOE00392...
5. Install snap ring (A).
IMPORTANT:
When measuring axial play, use both hands to guide the gear onto the shaft. Make sure the gear is straight (i.e. not skewed).
NOTE:
Axial play of gear must be 0.15 to 0.6 mm (0.006 to 0.024 in.).
-: Thrust Washer Thickness
IMPORTANT:
Up to transmission serial no. 157465, snap ring (A) had a thickness of 2.0 mm (0.079 in.). When repairing, put additional washer L112108 on the outside
of the snap ring.
LX000799-UN: Install Snap Ring and Thrust Washer
Install thrust washer and gear of range C (B).
Install snap ring (A).
LX000800-UN: Install Synchronizer Unit & Snap Ring
Install synchronizer unit (B) and snap ring (A).
NOTE:
Axial play of synchronizer unit must be less than 0.1 mm (0.004 in.).
-: Snap Ring Thickness
Thickness of Thrust Washers Available
3.65 mm (0.144 in.) 3.95 mm (0.156 in.)
3.80 mm (0.150 in.)
Thickness of Snap Rings Available
2.0 mm (0.079 in.) 2.2 mm (0.087 in.)
2.1 mm (0.083 in.) 2.3 mm (0.091 in.)
5/11
2020/7/11file:///C:/ProgramData/Service%20ADVISOR/Temp/tm4493_LXOUOE00392...
6. LX000801-UN: Check Gear Axial Play
Check axial play of gear for range C.
IMPORTANT:
When measuring axial play, use both hands to guide the gear onto the shaft. Make sure the gear is straight (i.e. not skewed).
NOTE:
Axial play of gear must be 0.15 to 0.6 mm (0.006 to 0.024 in.).
If axial play is not correct, use a different size thrust washer to install gear of range C.
-: Thrust Washer Thickness
LX000802-UN: Install Gear, Thrust Washer & Snap Ring
Install gear of range D (C) with connecting ring.
Install thrust washer (B) and snap ring (A).
IMPORTANT:
When measuring axial play, use both hands to guide the gear onto the shaft. Make sure the gear is straight (i.e. not skewed).
NOTE:
Axial play of gear must be 0.15 to 0.6 mm (0.006 to 0.024 in.).
-: Thrust Washer Thickness
Thickness of Thrust Washers Available
3.65 mm (0.144 in.) 3.95 mm (0.156 in.)
3.80 mm (0.150 in.)
Thickness of Thrust Washers Available
3.65 mm (0.144 in.) 3.95 mm (0.156 in.)
3.80 mm (0.150 in.)
6/11
2020/7/11file:///C:/ProgramData/Service%20ADVISOR/Temp/tm4493_LXOUOE00392...
7. LX000803-UN: Range Transmission Assembly
LEGEND:
A - Ball
B - Shaft
C - Bushing
D - Cap screw (2 used)
E - Cap screw
F - Thrust washer
G - Double gear
H - Needle race
I - Thrust washer
J - Needle race
K - Spacer bushing
L - Double gear
M - Bolt
N - Idler gear housing
O - Shaft
Assemble idler gear housing [ 15- and 18-gear versions (SyncroPlus) or 20 and 24-gear versions (PowrQuad) ] .
LX000804-UN: Tighten Cap Screws
Install idler gear housing [ 15- and 18-gear versions (SyncroPlus) or 20 and 24-gear versions (PowrQuad) ] .
Tighten cap screws to 55 N·m (40 lb-ft).
7/11
2020/7/11file:///C:/ProgramData/Service%20ADVISOR/Temp/tm4493_LXOUOE00392...
8. LX009122-UN: Shifter Shafts and Shifter Forks
LEGEND:
A - Shifter shaft (ranges A and B)
B - Shifter fork (ranges A and B)
C - Shifter fork (ranges C and D)
D - Shifter shaft (ranges C and D)
Install shifter shafts and shifter forks.
LX009124-UN: Taper Roller Bearing Cones
Press taper roller bearing cones (A) and (B) onto drive shaft.
LX009121-UN: Install Drive Shaft and Spring
Install drive shaft (B).
Connect spring (A) of parking lock.
8/11
2020/7/11file:///C:/ProgramData/Service%20ADVISOR/Temp/tm4493_LXOUOE00392...
9. LX009359-UN: Install Parking Lock Shifter Cam
LEGEND:
A - Lever
B - Spring
C - Seal ring
D - Bushing (2 used)
E - Spring pin
F - Shifter cam
G - Spacer washer (thickness as required)
H - Axial bearing assy.
Install parking lock shifter cam in the transmission housing. Use a 1.6 mm (0.063 in.) spacer washer (G) (recommended average setting).
LX1016989-UN: Install Shifter Shaft & Stop Assy.
Referring to the exploded view, assemble and install the fwd/rev. shifter shaft (A) and stop assembly (B; if equipped).
LX009125-UN: Install Transmission Housing
Install transmission housing.
9/11
2020/7/11file:///C:/ProgramData/Service%20ADVISOR/Temp/tm4493_LXOUOE00392...
10. Tighten cap screws.
LX009360-UN: Parking lock disengaged
LX009361-UN: Parking lock engaged, play
Check play of parking lock shifter cam as follows:
1. Engage parking lock. Turn shifter cam to end point, then back 10 degrees so that the cam is no longer touching.
2. Attach dial gauge to shifter cam. Use a suitable lever or screwdriver to press the locking latch against the teeth of front wheel drive gear and measure the play of
the shifter cam.
3. Play must be between 0.25 and 0.60 mm (0.010 and 0.024 in.).
4. If play is excessive, the transmission housing must removed once more and a larger spacer washer used (see “Install parking lock shifter cam”). If play is
insufficient, a smaller spacer washer must be used.
-: Space Washer Thickness
LX009126-UN: Install Taper Roller Bearing Cup
LEGEND:
A - Snap ring (thickness as required)
B - Taper roller bearing cup
Item Measurement Specification
Grade 8.8 Cap Screw Torque 90 N·m (65 lb-ft)
Grade 10.9 Cap Screw Torque 120 N·m (90 lb-ft)
Thickness of Spacer Washer Available
1.2 mm (0.047 in.) 1.7 mm (0.067 in.)
1.3 mm (0.051 in.) 1.8 mm (0.071 in.)
1.4 mm (0.055 in.) 1.9 mm (0.075 in.)
1.5 mm (0.059 in.) 2.0 mm (0.079 in.)
1.6 mm (0.063 in.)
10/11
2020/7/11file:///C:/ProgramData/Service%20ADVISOR/Temp/tm4493_LXOUOE00392...
11. C - Needle bearing
D - Cap screw [ Later tractor series have 2 cap screws]
Install taper roller bearing cup (B) of drive shaft and needle bearing (C) of differential drive shaft.
LX009127-UN: Check Drive Shaft Axial Play
Check axial play of drive shaft.
NOTE:
Axial play of drive shaft must be less than 0.1 mm (0.004 in.).
If axial play is not correct, use a different size snap ring to install the taper roller bearing cup.
-: Snap Ring Thickness
LX009128-UN: Tighten Cap Screw
Tighten cap screw to 30 N·m (22 lb-ft).
LX013472-UN: Countersunk Screw
Coat the thread on countersunk screw [ 12-gear version (SyncroPlus) and 16-gear version (Power Reverser or PowrQuad) only] (A) with LOCTITE® E 648 (L41860) and
tighten it to 25 N·m (18 lb-ft).
Thickness of Snap Rings Available
2.0 mm (0.079 in.) 2.2 mm (0.087 in.)
2.1 mm (0.083 in.) 2.3 mm (0.091 in.)
LOCTITE is a trademark of Loctite Corp. LX,5030 009469-19-1997/06/01
11/11
2020/7/11file:///C:/ProgramData/Service%20ADVISOR/Temp/tm4493_LXOUOE00392...
12. tm4493 - 6100 to 6600 Tractors
Adjusting Shift Mechanism
Adjusting Shift Mechanism
1. Place shifter shafts in neutral position.
2.
LX000810-UN: Threaded Pins
Adjust shifter forks by means of threaded pins (A) until they are centered in relation to shift collars.
3. Move shifter forks to all positions.
NOTE:
Make sure that shifter forks do not rub laterally on shift collars in any shift position.
4. Tighten threaded pins to 40 N·m (30 lb-ft).
5. Recheck adjustment.
LX,RDTG 002138-19-1996/04/01
1/1
2020/7/11file:///C:/ProgramData/Service%20ADVISOR/Temp/tm4493_LXOUOE00392...
13. tm4493 - 6100 to 6600 Tractors
Final Assembly
Final Assembly
1. Install front wheel drive clutch, see Section 56, Group 10.
2. If equipped, install option transmission or creeper transmission, see Group 00.
3. SyncroPlus™ : Install PERMA-CLUTCH 2™ and gear transmission. See Group 00.
PowrQuad™ : Install PowrQuad™ module. See Group 00.
Install forward/reverse linkage. See Section 55, Group 05.
4. Install differential, see Section 56, Group 15.
5. Install final drives, see Section 56, Group 00.
6. Install PTO, see Section 56, Group 00.
LX009129-UN: Tighten Cap Screws
Install shift cover.
Tighten cap screws to 30 N·m (22 lb-ft).
SyncroPlus is a trademark of Deere & Company.
PERMA-CLUTCH 2 is a trademark of Deere & Company.
PowrQuad is a trademark of Deere & Company. LX,RDTG 002139-19-1994/06/01
1/1
2020/7/11file:///C:/ProgramData/Service%20ADVISOR/Temp/tm4493_LXOUOE00392...
14. tm4493 - 6100 to 6600 Tractors
Special or Essential Tools
Special or Essential Tools
NOTE:
Order tools according to information given in the U.S. SERVICEGARD™ Catalog or in the European
Microfiche Tool Catalog (MTC).
Tilting
device.......KJD10178
Tilting the cab up and
down
KJD10178-UN: KJD10178
Universal support stand
[ Additionally required:
1 commercial 12 ton
jack] .......JT05725
Supporting tractor during
rear wheel removal.
JT05725-UN: JT05725
Puller.......KJD10173
Removal and installation
1/2
2020/7/11file:///C:/ProgramData/Service%20ADVISOR/Temp/tm4493_LXOUOE00392...
15. of PTO drive shaft and
pump drive shaft
KJD10173-UN: KJD10173
Lifting eye.......JD-244-1
Removal and installation
of tractor components
LX002476-UN: JD-244-1
Lifting eye.......JD-244-2
Removal and installation
of tractor components
LX002297-UN: JD-244-2
SERVICEGARD is a trademark of Deere & Company. LX,CRA50 002753-19-1993/10/01
2/2
2020/7/11file:///C:/ProgramData/Service%20ADVISOR/Temp/tm4493_LXOUOE00392...
16. tm4493 - 6100 to 6600 Tractors
Dealer-Manufactured Special Tools
Dealer-Manufactured Special Tools
See also Section 99, Group 05.
LX1016738-UN: Lifting Device
Lifting device for clutch housing and PowrReverser™ module.
PowrReverser is a trademark of Deere & Company. LX,5100 012015-19-1997/06/01
1/1
2020/7/11file:///C:/ProgramData/Service%20ADVISOR/Temp/tm4493_LXOUOE00392...
17. tm4493 - 6100 to 6600 Tractors
Specifications
Specifications
Item Measurement Specification
U.j. shaft to drive flange, corrugated-
head screws
Torque 135 N·m (100 lb-ft)
PowrReverser™ module to gear
transmission, cap screws
Torque 50 N·m (35 lb-ft)
Clutch bowden cable support to
clutch housing, cap screws
Torque 11 N·m (8 lb-ft)
Suction line of transmission oil pump
to clutch housing, hex. socket
screws
Torque 18 N·m (13.3 lb-ft)
Rear wheel to rear axle
Tractors with flanged axle, cap
screws
Torque 500 N·m (370 lb-ft)
Transmission oil, 6100 - 6400
Tractors
Capacity 52 L (13.7 U.S.gal.) approx.
See Section 10, Group 05.
PowrReverser is a trademark of Deere & Company. LX,5100 012013-19-1997/06/01
1/1
2020/7/11file:///C:/ProgramData/Service%20ADVISOR/Temp/tm4493_LXOUOE00392...
18. tm4493 - 6100 to 6600 Tractors
Removing the PowrReverser™ Module
Removing the PowrReverser™ Module
LX1016498-UN: PowrReverser Module
LX002206-UN: Tilt Operator's Cab
For tilting the operator's cab, see Section 90, Groups 00 and 01.
1/4
2020/7/11file:///C:/ProgramData/Service%20ADVISOR/Temp/tm4493_LXOUOE00392...
19. LX007211-UN: Remove Oil Drain Plugs
Pull out swinging drawbar to the rear.
Remove oil drain plugs (A) and (B). Drain transmission oil into a suitable container.
Capacity: oil and filter change approx. 52 L (13.7 U.S. gal.)
Refer to Section 10, Group 05 for the precise oil capacity.
LX002223-UN: Remove Plug
Remove plug (A).
LX002599-UN: PTO Drive Shaft and Puller
Pull PTO drive shaft (A) and then pump drive shaft out of housing by means of puller KJD10173 (B).
LX1016495-UN: Remove Bracket
Remove bracket (A).
2/4
2020/7/11file:///C:/ProgramData/Service%20ADVISOR/Temp/tm4493_LXOUOE00392...
20. LX1015880-UN: Oil Cooler Hoses
Disconnect oil cooler hoses (A) and (B) where they meet the Power Reverser module.
LX007768-UN: Remove Cap Screws
Take out cap screws (A) and (B), and remove the u.j. shaft.
See also Section 56, Group 05.
LX1016742-UN: Disconnect Cables and Plugs
Disconnect cables and plugs (A) to (D).
LX1016736-UN: Remove Screws, Suction Line and Linkage
Take out screws (A) and pull suction line (B) out of the differential housing.
NOTE:
Trap the oil as it emerges from the suction line.
Disengage forward/reverse linkage (C).
3/4
2020/7/11file:///C:/ProgramData/Service%20ADVISOR/Temp/tm4493_LXOUOE00392...
21. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
22. LX1016740-UN: Remove Return Hose
Remove return hose (A).
LX1016737-UN: Remove Pressure Line
Remove pressure line (A).
LX1016496-UN: Install Lifting Device and Cap Screw
Install lifting device (A) as shown, and secure it with cap screw (B). Attach lifting tackle.
LX1016739-UN: Remove Screws from Housing Flange
Take screws (A) out of the housing flange and remove the PowrReverser™ module.
NOTE:
Screw (B) remains in place.
PowrReverser is a trademark of Deere & Company. LX,5100 012021-19-1997/06/01
4/4
2020/7/11file:///C:/ProgramData/Service%20ADVISOR/Temp/tm4493_LXOUOE00392...
23. tm4493 - 6100 to 6600 Tractors
Installing the PowrReverser™ Module
Installing the PowrReverser™ Module
Clean the sealing surfaces thoroughly and install a new flange seal.
Attach the lifting device and tackle to the PowrReverser™ module.
LX1016741-UN: Install Cap Screws
Install the PowrReverser™ module. Install cap screws (A) and tighten them to 50 N·m (35 lb-ft).
LX1016736-UN: Suction Line, Screws and Linkage
Put new seals on the suction line (B), and install the suction line on the PowrReverser™ module and differential housing.
Tighten screws (A) to 18 N·m (13.3 lb-ft).
Adjust and install forward/reverse linkage (C). See Group 05 in this Section.
For installation of u.j. shaft, refer to Section 56, Group 05.
For further assembly, reverse disassembly procedure.
Install oil drain plugs, fill with transmission oil, and check the oil level.
Tilt down the operator's cab. See Section 90.
Check all the functions of the tractor. If necessary, rectify any faults as described in the Technical Manual.
1/2
2020/7/11file:///C:/ProgramData/Service%20ADVISOR/Temp/tm4493_LXOUOE00392...
24. tm4493 - 6100 to 6600 Tractors
Removing and Installing the Gear Transmission
Removing and Installing the Gear Transmission
NOTE:
To remove or install the gear transmission, see Section 50, Group 00 ( SyncroPlus™ transmission).
NOTE:
See Group 15 in this Section for measuring the gaps at the connecting ring.
SyncroPlus is a trademark of Deere & Company. LX,5100 012068-19-1997/06/01
1/1
2020/7/11file:///C:/ProgramData/Service%20ADVISOR/Temp/tm4493_LXOUOE00392...