This 3-sentence summary provides the key details from the given document:
The document is a service manual for JCB drivetrain systems that provides general information, care and safety instructions, and maintenance procedures. It details torque settings, recommended lubricants, and lists service tools needed for tasks like compressing differential lock springs and inserting oil seals. The manual is organized into sections covering general information, driveheads, brakes, and contains part numbers, illustrations, and cross-references to guide maintenance and repair work.
Jcb sd55 3 piece axles service repair manualifkskjdksmem
This service manual provides information on routine maintenance, repairs, and safety procedures for JCB drivetrain systems. It contains sections on general information, care and safety, maintenance, hydraulics, axles, and brakes. The care and safety section emphasizes that safety must come first and outlines important warnings and cautions for workshop procedures. It notes safety notices in the manual use signal words like DANGER, WARNING, and CAUTION to indicate hazard levels and stresses following proper safety procedures when maintaining or repairing hydraulic equipment.
JCB SD55-3 Piece Axles Service Repair Manual.pdfdjkkskmmmdm
This 3-page service manual section provides general information for working on JCB drivetrain systems, including:
- Instructions for identifying axles by serial number and build configuration.
- Recommendations for ordering replacement parts and reassembling components correctly.
- Torque specifications for various bolt sizes.
- A list and pictures of recommended service tools numbered for reference.
- Information on sealing and retaining compounds for different applications.
Jcb sd55 3 piece axles service repair manualudfjjdksekmm
This 3-page service manual section provides general information for working on JCB drivetrain systems, including:
- Instructions for identifying axles by serial number and build configuration.
- Recommendations for ordering replacement parts and reassembling components correctly.
- Torque specifications for various bolt sizes.
- A list and pictures of recommended service tools numbered for reference.
- Information on sealing and retaining compounds for different applications.
JCB SD55-3 Piece Axles Service Repair Manual Instant Download.pdfzao908wangsa
This document provides a service manual for JCB drivetrain systems. It contains information on general safety, operating safety, maintenance safety, and specific component sections for hydraulics, axles, and brakes. Torque specifications and lists of recommended service tools and compounds are also included. The manual is intended for use by service engineers and technicians and provides maintenance and repair instructions with an emphasis on safety.
JCB SD55-3 Piece Axles Service Repair Manual Instant Download.pdftan0033118
This document provides a service manual for JCB drivetrain systems. It contains information on general safety, operating safety, maintenance safety, and specific component sections for hydraulics, axles, and brakes. Torque specifications and lists of recommended service tools and compounds are also included. The manual is intended for use by service engineers and technicians maintaining and repairing hydraulic equipment.
Nissan Forklift Electric P01 Series Service Repair Manual.pdf8sjkdkdmdmdm
This service manual provides maintenance and repair procedures for the NISSAN FORKLIFT P01 and P02 series. It consists of 14 sections covering general information, maintenance, control systems, batteries, electrical systems, motors, differentials, axles, brakes, steering, hydraulics, loading mechanisms, and the forklift body and frame. Technicians should follow the precautions outlined and use any technical bulletins issued by NISSAN together with this manual for repair reference. The manual is designed to enable safe and accurate service through detailed step-by-step instructions and specifications.
New Holland T8.435 696110769 CVT TIER 2 Tractor Service Repair Manual [ZERE08...8sjkdkdmdmdm
This document is a service manual for CNH Industrial tractor models T8.320, T8.350, T8.380, T8.410, and T8.435, and their SmartTrax variants, with continuously variable transmissions. The manual contains information on engine systems, power coupling, transmission, four-wheel drive systems, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and implements, steering, wheels, tracks, cab climate control, and electrical systems. It is intended to be used by qualified dealership personnel for repair and maintenance of the tractors.
New Holland T8.350 PST TIER 2 CHELNY Tractor Service Repair Manual [ZGRE05001...8sjkdkdmdmdm
This document is a service manual for CNH Industrial tractors that provides information on maintenance and repair for various tractor systems and components. It includes sections covering the engine, transmission, axles, hydraulics, steering, wheels, tracks, cab climate control, and electrical systems. The manual contains detailed descriptions and diagrams to assist technicians with repairs.
Jcb sd55 3 piece axles service repair manualifkskjdksmem
This service manual provides information on routine maintenance, repairs, and safety procedures for JCB drivetrain systems. It contains sections on general information, care and safety, maintenance, hydraulics, axles, and brakes. The care and safety section emphasizes that safety must come first and outlines important warnings and cautions for workshop procedures. It notes safety notices in the manual use signal words like DANGER, WARNING, and CAUTION to indicate hazard levels and stresses following proper safety procedures when maintaining or repairing hydraulic equipment.
JCB SD55-3 Piece Axles Service Repair Manual.pdfdjkkskmmmdm
This 3-page service manual section provides general information for working on JCB drivetrain systems, including:
- Instructions for identifying axles by serial number and build configuration.
- Recommendations for ordering replacement parts and reassembling components correctly.
- Torque specifications for various bolt sizes.
- A list and pictures of recommended service tools numbered for reference.
- Information on sealing and retaining compounds for different applications.
Jcb sd55 3 piece axles service repair manualudfjjdksekmm
This 3-page service manual section provides general information for working on JCB drivetrain systems, including:
- Instructions for identifying axles by serial number and build configuration.
- Recommendations for ordering replacement parts and reassembling components correctly.
- Torque specifications for various bolt sizes.
- A list and pictures of recommended service tools numbered for reference.
- Information on sealing and retaining compounds for different applications.
JCB SD55-3 Piece Axles Service Repair Manual Instant Download.pdfzao908wangsa
This document provides a service manual for JCB drivetrain systems. It contains information on general safety, operating safety, maintenance safety, and specific component sections for hydraulics, axles, and brakes. Torque specifications and lists of recommended service tools and compounds are also included. The manual is intended for use by service engineers and technicians and provides maintenance and repair instructions with an emphasis on safety.
JCB SD55-3 Piece Axles Service Repair Manual Instant Download.pdftan0033118
This document provides a service manual for JCB drivetrain systems. It contains information on general safety, operating safety, maintenance safety, and specific component sections for hydraulics, axles, and brakes. Torque specifications and lists of recommended service tools and compounds are also included. The manual is intended for use by service engineers and technicians maintaining and repairing hydraulic equipment.
Nissan Forklift Electric P01 Series Service Repair Manual.pdf8sjkdkdmdmdm
This service manual provides maintenance and repair procedures for the NISSAN FORKLIFT P01 and P02 series. It consists of 14 sections covering general information, maintenance, control systems, batteries, electrical systems, motors, differentials, axles, brakes, steering, hydraulics, loading mechanisms, and the forklift body and frame. Technicians should follow the precautions outlined and use any technical bulletins issued by NISSAN together with this manual for repair reference. The manual is designed to enable safe and accurate service through detailed step-by-step instructions and specifications.
New Holland T8.435 696110769 CVT TIER 2 Tractor Service Repair Manual [ZERE08...8sjkdkdmdmdm
This document is a service manual for CNH Industrial tractor models T8.320, T8.350, T8.380, T8.410, and T8.435, and their SmartTrax variants, with continuously variable transmissions. The manual contains information on engine systems, power coupling, transmission, four-wheel drive systems, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and implements, steering, wheels, tracks, cab climate control, and electrical systems. It is intended to be used by qualified dealership personnel for repair and maintenance of the tractors.
New Holland T8.350 PST TIER 2 CHELNY Tractor Service Repair Manual [ZGRE05001...8sjkdkdmdmdm
This document is a service manual for CNH Industrial tractors that provides information on maintenance and repair for various tractor systems and components. It includes sections covering the engine, transmission, axles, hydraulics, steering, wheels, tracks, cab climate control, and electrical systems. The manual contains detailed descriptions and diagrams to assist technicians with repairs.
New Holland T8.350 PST TIER 2 Tractor Service Repair Manual [ZGRE05001- ].pdf8sjkdkdmdmdm
This document is a service manual for CNH Industrial T8 tractor models T8.320, T8.350, T8.380, and T8.410 with powershift transmissions from model years 2017 and above. It contains sections covering the engine, transmission, axles, hydraulics, electrical systems, and other components, providing repair and maintenance instructions. The manual is intended for use by qualified dealership technicians.
New Holland T6.180 STAGE IV Tractor Service Repair Manual.pdf8sjkdkdmdmdm
This document is a service manual that provides maintenance and repair information for various tractor models in the T6 series, including the T6.125, T6.145, T6.155, T6.165, T6.175, T6.160 and T6.180. The manual contains sections covering the engine, clutch, transmission, four-wheel drive system, front and rear axles, power take-off, brakes, hydraulics and other components. It includes detailed content on maintenance, troubleshooting and repair procedures for the components of the listed tractor models.
New Holland T6.175 STAGE IV Tractor Service Repair Manual.pdf8sjkdkdmdmdm
This service manual provides maintenance and repair information for Case IH T6 tractors models T6.125 through T6.180. The manual covers systems of the tractor such as the engine, transmission, axles, hydraulics, electrical systems, and more. Each system section includes detailed information on components, operation, and repair procedures.
New Holland 9030L Grape Harvester Service Repair Manual.pdf8sjkdkdmdmdm
This document is a service manual for the 9030L grape harvester. It contains sections covering the engine, hydrostatic drive, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, product feeding, residue handling, cleaning, secondary cleaning/destemming, crop storage/unloading, accessories, tools, and the platform, cab, bodywork, and decals of the harvester. It provides information on servicing and repairing components of the harvester.
JCB 530-110 and 530-120 Servo Options Telescopic Handler Service Repair Manua...8sjkdkdmdmdm
This document provides lubrication specifications and fluid capacities for various JCB machine models, including 525, 527, 530, 535 and 537 models. It lists recommended engine oils, transmission fluids, hydraulic fluids, greases and other lubricants. It also provides coolant mixture recommendations and notes that new engines do not require a break-in period and should be used immediately in normal work cycles.
This manual provides safety information and procedures for servicing a machine. It describes potential hazards, required safety equipment, and precautions to take when working on the machine. Key points include stopping the engine before maintenance, wearing protective gear, securing any raised components, and handling pressurized fluids and batteries with care. The manual structure is also outlined.
JCB 537-120 and 537-130 Telescopic Handler Service Repair Manual SN572900.pdf8sjkdkdmdmdm
This document provides lubrication specifications and fluid capacities for various JCB machine models, including 525, 527, 530, 535 and 537 models. It lists recommended engine oils, transmission fluids, hydraulic fluids, greases and other lubricants. It also provides coolant mixture recommendations and notes that new engines do not require a break-in period and should be used immediately in normal work cycles.
This document provides safety information and guidelines for engineers servicing machinery. It describes symbols used in the manual and outlines its structure. The first chapter covers safety precautions, including wearing protective equipment, preparing for emergencies, following safety rules, and taking care when working on or near moving parts. Maintaining a clean work area and stopping the engine before maintenance are also emphasized.
This document provides safety information and guidelines for engineers servicing machinery. It describes proper procedures for maintenance and repair. Engineers should follow all safety rules, wear protective equipment, secure hazardous areas, and stop the engine before performing any maintenance to avoid injury. The document emphasizes maintaining a clean work area and being aware of moving parts.
Takeuchi TL220 Track Loader Parts Catalogue Manual (Serial No. 222000001 and ...8sjkdkdmdmdm
This document provides parts information for a track-type tractor. It includes exploded diagrams and lists of parts for systems like the track rollers, idlers, adjusters, travel motor, belt, frame, arm stopper, hook, and operation levers. The parts are identified by number and include the part name, quantity, and references to other documents for service or ordering information.
This document provides safety precautions and instructions for maintenance personnel working on a crawler loader. It outlines general safety rules including wearing protective equipment, blocking the machine securely before working underneath, releasing hydraulic pressure, and disconnecting the battery. The document also provides cautions for disassembly and assembly such as cleaning parts, making matching marks, and replacing seals with new parts.
This document provides safety precautions for maintenance and repair of a crawler loader. It outlines general safety rules including wearing protective equipment, using the correct tools, blocking moving parts, and stopping the engine before performing maintenance. Specific precautions are given for working on hydraulic systems, moving heavy objects, and securing open compartments. Maintainers should carefully follow all safety instructions to avoid injury.
1. This manual provides procedures for maintenance and troubleshooting of the machine. Refer to it during daily work to improve service.
2. Directional terms like front, rear, left and right are defined. The machine serial number is included on the identification plate and should be included in reports.
3. Safety precautions that must be followed when working on the machine include wearing protective equipment, installing an extinguisher and first aid kit, stopping the engine before maintenance, and keeping clear of moving parts.
New Holland T8.410 PST TIER 2 Tractor Service Repair Manual [ZGRE05001- ].pdf8sjkdkdmdmdm
This document is a service manual for CNH Industrial T8 tractor models T8.320, T8.350, T8.380, and T8.410 with powershift transmissions (PST). It provides maintenance and repair instructions for the engine, transmission, axles, hydraulics, electrical systems, and other components. The manual is intended for use by qualified dealership personnel and includes safety warnings.
New Holland T8.380 PST TIER 2 Tractor Service Repair Manual [ZGRE05001- ].pdf8sjkdkdmdmdm
This document is a service manual for CNH Industrial T8 tractor models T8.320, T8.350, T8.380, and T8.410, including SmartTrax versions, with Powershift Transmissions (PST) and engine specifications. The manual contains information on maintenance and repair of the tractor's engine, transmission, axles, hydraulics, electrical systems, and other components. Sections cover specifications, maintenance procedures, troubleshooting, and replacement of parts.
New Holland T8.320 696110729 CVT TIER 2 Tractor Service Repair Manual [ZERE08...8sjkdkdmdmdm
This document is a service manual for CNH Industrial tractor models T8.320, T8.350, T8.380, T8.410, and T8.435, and their SmartTrax variants, with continuously variable transmissions. The manual contains information on engine systems, power coupling, transmission, four-wheel drive systems, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and implements, steering, wheels, tracks, cab climate control, and electrical systems. It is intended to be used by qualified dealership personnel for repair and maintenance of the tractors.
New Holland T8.380 696110749 CVT TIER 2 Tractor Service Repair Manual [ZERE08...8sjkdkdmdmdm
This document is a service manual that provides specifications and repair/maintenance procedures for various tractor models and components, including the engine, transmission, axles, hydraulics, steering, wheels, and tracks. It contains sections on the continuously variable transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and couplings, steering, wheels, and tracks. The manual is intended to guide service technicians in servicing and repairing components of the listed tractor models.
New Holland T8.350 696110739 CVT TIER 2 Tractor Service Repair Manual [ZERE08...8sjkdkdmdmdm
This document is a service manual for CNH Industrial tractor models T8.320, T8.350, T8.380, T8.410, and T8.435, and their SmartTrax variants, with continuously variable transmissions. The manual contains information on engine systems, power coupling, transmission, four-wheel drive systems, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and implements, steering, wheels, tracks, cab climate control, and electrical systems. It is intended to be used by qualified dealership personnel for repair and maintenance of the tractors.
New Holland T8.320 PST TIER 2 Tractor Service Repair Manual [ZGRE05001- ].pdf8sjkdkdmdmdm
This document is a service manual for CNH Industrial tractors that provides information on maintenance and repair for various tractor systems and components. It includes sections covering the engine, transmission, axles, hydraulics, steering, wheels, tracks, cab climate control, and electrical systems. The manual contains detailed descriptions and diagrams to assist technicians with repairs.
New Holland T6.180 Dynamic Command STAGE IV Tractor Service Repair Manual.pdf8sjkdkdmdmdm
This service manual provides maintenance and repair information for Case IH T6 tractors models T6.125 through T6.180. The manual covers systems of the tractor including the engine and fuel system, transmission, axles, hydraulics, electrical system, climate control, steering, brakes, hitches and 3-point hitch. The manual is intended to be used as a reference for technicians servicing these tractor models.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
New Holland T8.350 PST TIER 2 Tractor Service Repair Manual [ZGRE05001- ].pdf8sjkdkdmdmdm
This document is a service manual for CNH Industrial T8 tractor models T8.320, T8.350, T8.380, and T8.410 with powershift transmissions from model years 2017 and above. It contains sections covering the engine, transmission, axles, hydraulics, electrical systems, and other components, providing repair and maintenance instructions. The manual is intended for use by qualified dealership technicians.
New Holland T6.180 STAGE IV Tractor Service Repair Manual.pdf8sjkdkdmdmdm
This document is a service manual that provides maintenance and repair information for various tractor models in the T6 series, including the T6.125, T6.145, T6.155, T6.165, T6.175, T6.160 and T6.180. The manual contains sections covering the engine, clutch, transmission, four-wheel drive system, front and rear axles, power take-off, brakes, hydraulics and other components. It includes detailed content on maintenance, troubleshooting and repair procedures for the components of the listed tractor models.
New Holland T6.175 STAGE IV Tractor Service Repair Manual.pdf8sjkdkdmdmdm
This service manual provides maintenance and repair information for Case IH T6 tractors models T6.125 through T6.180. The manual covers systems of the tractor such as the engine, transmission, axles, hydraulics, electrical systems, and more. Each system section includes detailed information on components, operation, and repair procedures.
New Holland 9030L Grape Harvester Service Repair Manual.pdf8sjkdkdmdmdm
This document is a service manual for the 9030L grape harvester. It contains sections covering the engine, hydrostatic drive, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, product feeding, residue handling, cleaning, secondary cleaning/destemming, crop storage/unloading, accessories, tools, and the platform, cab, bodywork, and decals of the harvester. It provides information on servicing and repairing components of the harvester.
JCB 530-110 and 530-120 Servo Options Telescopic Handler Service Repair Manua...8sjkdkdmdmdm
This document provides lubrication specifications and fluid capacities for various JCB machine models, including 525, 527, 530, 535 and 537 models. It lists recommended engine oils, transmission fluids, hydraulic fluids, greases and other lubricants. It also provides coolant mixture recommendations and notes that new engines do not require a break-in period and should be used immediately in normal work cycles.
This manual provides safety information and procedures for servicing a machine. It describes potential hazards, required safety equipment, and precautions to take when working on the machine. Key points include stopping the engine before maintenance, wearing protective gear, securing any raised components, and handling pressurized fluids and batteries with care. The manual structure is also outlined.
JCB 537-120 and 537-130 Telescopic Handler Service Repair Manual SN572900.pdf8sjkdkdmdmdm
This document provides lubrication specifications and fluid capacities for various JCB machine models, including 525, 527, 530, 535 and 537 models. It lists recommended engine oils, transmission fluids, hydraulic fluids, greases and other lubricants. It also provides coolant mixture recommendations and notes that new engines do not require a break-in period and should be used immediately in normal work cycles.
This document provides safety information and guidelines for engineers servicing machinery. It describes symbols used in the manual and outlines its structure. The first chapter covers safety precautions, including wearing protective equipment, preparing for emergencies, following safety rules, and taking care when working on or near moving parts. Maintaining a clean work area and stopping the engine before maintenance are also emphasized.
This document provides safety information and guidelines for engineers servicing machinery. It describes proper procedures for maintenance and repair. Engineers should follow all safety rules, wear protective equipment, secure hazardous areas, and stop the engine before performing any maintenance to avoid injury. The document emphasizes maintaining a clean work area and being aware of moving parts.
Takeuchi TL220 Track Loader Parts Catalogue Manual (Serial No. 222000001 and ...8sjkdkdmdmdm
This document provides parts information for a track-type tractor. It includes exploded diagrams and lists of parts for systems like the track rollers, idlers, adjusters, travel motor, belt, frame, arm stopper, hook, and operation levers. The parts are identified by number and include the part name, quantity, and references to other documents for service or ordering information.
This document provides safety precautions and instructions for maintenance personnel working on a crawler loader. It outlines general safety rules including wearing protective equipment, blocking the machine securely before working underneath, releasing hydraulic pressure, and disconnecting the battery. The document also provides cautions for disassembly and assembly such as cleaning parts, making matching marks, and replacing seals with new parts.
This document provides safety precautions for maintenance and repair of a crawler loader. It outlines general safety rules including wearing protective equipment, using the correct tools, blocking moving parts, and stopping the engine before performing maintenance. Specific precautions are given for working on hydraulic systems, moving heavy objects, and securing open compartments. Maintainers should carefully follow all safety instructions to avoid injury.
1. This manual provides procedures for maintenance and troubleshooting of the machine. Refer to it during daily work to improve service.
2. Directional terms like front, rear, left and right are defined. The machine serial number is included on the identification plate and should be included in reports.
3. Safety precautions that must be followed when working on the machine include wearing protective equipment, installing an extinguisher and first aid kit, stopping the engine before maintenance, and keeping clear of moving parts.
New Holland T8.410 PST TIER 2 Tractor Service Repair Manual [ZGRE05001- ].pdf8sjkdkdmdmdm
This document is a service manual for CNH Industrial T8 tractor models T8.320, T8.350, T8.380, and T8.410 with powershift transmissions (PST). It provides maintenance and repair instructions for the engine, transmission, axles, hydraulics, electrical systems, and other components. The manual is intended for use by qualified dealership personnel and includes safety warnings.
New Holland T8.380 PST TIER 2 Tractor Service Repair Manual [ZGRE05001- ].pdf8sjkdkdmdmdm
This document is a service manual for CNH Industrial T8 tractor models T8.320, T8.350, T8.380, and T8.410, including SmartTrax versions, with Powershift Transmissions (PST) and engine specifications. The manual contains information on maintenance and repair of the tractor's engine, transmission, axles, hydraulics, electrical systems, and other components. Sections cover specifications, maintenance procedures, troubleshooting, and replacement of parts.
New Holland T8.320 696110729 CVT TIER 2 Tractor Service Repair Manual [ZERE08...8sjkdkdmdmdm
This document is a service manual for CNH Industrial tractor models T8.320, T8.350, T8.380, T8.410, and T8.435, and their SmartTrax variants, with continuously variable transmissions. The manual contains information on engine systems, power coupling, transmission, four-wheel drive systems, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and implements, steering, wheels, tracks, cab climate control, and electrical systems. It is intended to be used by qualified dealership personnel for repair and maintenance of the tractors.
New Holland T8.380 696110749 CVT TIER 2 Tractor Service Repair Manual [ZERE08...8sjkdkdmdmdm
This document is a service manual that provides specifications and repair/maintenance procedures for various tractor models and components, including the engine, transmission, axles, hydraulics, steering, wheels, and tracks. It contains sections on the continuously variable transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and couplings, steering, wheels, and tracks. The manual is intended to guide service technicians in servicing and repairing components of the listed tractor models.
New Holland T8.350 696110739 CVT TIER 2 Tractor Service Repair Manual [ZERE08...8sjkdkdmdmdm
This document is a service manual for CNH Industrial tractor models T8.320, T8.350, T8.380, T8.410, and T8.435, and their SmartTrax variants, with continuously variable transmissions. The manual contains information on engine systems, power coupling, transmission, four-wheel drive systems, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and implements, steering, wheels, tracks, cab climate control, and electrical systems. It is intended to be used by qualified dealership personnel for repair and maintenance of the tractors.
New Holland T8.320 PST TIER 2 Tractor Service Repair Manual [ZGRE05001- ].pdf8sjkdkdmdmdm
This document is a service manual for CNH Industrial tractors that provides information on maintenance and repair for various tractor systems and components. It includes sections covering the engine, transmission, axles, hydraulics, steering, wheels, tracks, cab climate control, and electrical systems. The manual contains detailed descriptions and diagrams to assist technicians with repairs.
New Holland T6.180 Dynamic Command STAGE IV Tractor Service Repair Manual.pdf8sjkdkdmdmdm
This service manual provides maintenance and repair information for Case IH T6 tractors models T6.125 through T6.180. The manual covers systems of the tractor including the engine and fuel system, transmission, axles, hydraulics, electrical system, climate control, steering, brakes, hitches and 3-point hitch. The manual is intended to be used as a reference for technicians servicing these tractor models.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Real-time driver monitoring is one of the easiest ways to make fleet management efficient as well as seamless. Connected vehicle solutions such as fleet GPS trackers and associated software help businesses in several ways. Refer to the post below for more details.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
car rentals in nassau bahamas | atv rental nassau bahamasjustinwilson0857
At Dash Auto Sales & Car Rentals, we take pride in providing top-notch automotive services to residents and visitors alike in Nassau, Bahamas. Whether you're looking to purchase a vehicle, rent a car for your vacation, or embark on an exciting ATV adventure, we have you covered with our wide range of options and exceptional customer service.
Website: www.dashrentacarbah.com
JCB PD70 Series Axle With Modular Drivehead Service Repair Manual.pdf
1. Service
Manual
JCB Drivetrain Systems Ltd
Wrexham Industrial Estate
WREXHAM
United Kingdom
LL13 9UF
Tel: (01978) 661140
Fax: (01978) 661863
General Information
Care & Safety
Routine Maintenance
Drivehead
Brakes
1
2
3
4
5
PD70 SERIES
MODULAR DRIVEHEAD
Publication No. 9803/9285
Issue 3
2. PD70 Series Axle With Modular Drivehead
Service Manual
Publication No. 9803/9825
Record of Changes
1
Date Page Issue Changes
April 2004 Cover 2 Issue number raised.
4i 2 Ref to Page 2-2 added
4-2-1 2 Illustration amended
4-2-2 1 New page
4-7-10 2 Text re. hand pump amended (2.2.1 and Note)
5-2-3 2 Cross reference added
3. 9803/9285 Issue 1
Introduction
This publication is designed for the benefit of Service Engineers.
These personnel should have a sound knowledge of workshop practice, safety procedures, and general techniques associated
with the maintenance and repair of hydraulic equipment.
Renewal of oil seals, gaskets, etc., and any component showing obvious signs of wear or damage is expected as a matter of
course. It is expected that components will be cleaned and lubricated where appropriate, and that any opened hose or pipe
connections will be blanked to prevent excessive loss of hydraulic fluid and ingress of dirt. Finally, please remember above all
else
SAFETY MUST COME FIRST!
The manual is compiled in sections, the first three are numbered and contain information as follows:
1 = General Information - includes torque settings and service tools.
2 = Care & Safety - includes warnings and cautions pertinent to aspects of workshop procedures etc.
3 = Routine Maintenance - includes service schedules and recommended lubricants etc.
The remaining sections deal with Dismantling, Overhaul etc. of specific components:
4 = Drivehead
5 = Brakes
The page numbering in each section is not continuous. This allows for the insertion of new items in later issues of the manual.
Section contents, technical data, operation descriptions etc. are inserted at the beginning of each section.
All sections are listed on the front cover; tabbed divider cards align directly with individual sections on the front cover for rapid
reference.
Page cross references are generally made by presenting the subject title printed in bold, followed by the title of the section
containing the subject. For example:
“16 Remove the output shaft assemblies (see Output Shafts - Removal and Dismantling, Section 4).”
Note: If only the subject title in bold is given, i.e. no section title, the cross reference is to another part of the same section.
Use the contents list at the beginning of each section to find the exact page number.
Where a torque setting is given as a single figure it may be varied by plus or minus 3%. Torque figures indicated are for dry
threads, hence for lubricated threads may be reduced by one third.
‘Left Hand’ and ‘Right Hand’ are as viewed from the rear of the machine facing forwards.
4. i
Section 1 General Information
9803/9285
Section 1
i
Issue 1
Contents Page No.
General Description 1 - 1
Unit Identification 1 - 1
Torque Settings 2 - 1
Service Tools Numerical List 3 - 1
Service Tools 4 - 1
Sealing and Retaining Compounds 5 - 1
5. 1 - 1
Section 1 General Information
9803/9285
Section 1
1 - 1
Issue 2
General Description
The PD70 modular drivehead has external service brake discs and callipers mounted on each output driveshaft. Single
callipers are fitted as standard, with twin callipers fitted as an option. An optional parking brake disc and calliper may be
installed on the input shaft as shown.
The drivehead houses the differential assembly. The differential gearing has specially shaped spider gears that provide ‘torque
proportioning’. This means that drive transmitted to the road wheels will be kept on one wheel if the other is slipping. The
differential can incorporate a ‘soft engage’ differential lock as an option.
Unit Identification
Drivehead Serial Plate
The drivehead serial number is stamped on a plate, which is
fitted on the housing near to the input driveshaft as shown.
1 When replacement parts are required, always ensure
that the correct parts are obtained, e.g. in the case of
gear replacements, always check the part number
stamped on the gear, and the number of teeth.
2 When ordering replacement parts, quote the details on
the serial plate.
3 It is essential that all gaskets and seals removed while
dismantling are renewed on reassembly.
4 On reassembly care should be taken that all parts are
correctly replaced since any component omitted or
incorrectly assembled can lead to a complete failure.
5 Lubricants should comply with the recommended list as
provided in this manual. It is important to adhere to the
oil changing procedure.
6 It is advisable to lightly lubricate with a recommended
lubricant, parts such as gears, shafts, thrust washers
and oil seals during reassembly.
716400
716400
6. Torque Settings
Use only where no torque setting is specified in the text. Values are for dry threads and may be within three per cent of the
figures stated. For lubricated threads the values should be REDUCED by one third.
UNF Grade 'S' Bolts
Bolt Size Hexagon (A/F) Torque Settings
in (mm) in Nm kgf m lbf ft
1/4 (6.3) 7/16 14 1.4 10
5/16 (7.9) 1/2 28 2.8 20
3/8 (9.5) 9/16 49 5.0 36
7/16 (11.1) 5/8 78 8.0 58
1/2 (12.7) 3/4 117 12.0 87
9/16 (14.3) 13/16 170 17.3 125
5/8 (15.9) 15/16 238 24.3 175
3/4 (19.0) 11/8 407 41.5 300
7/8 (22.2) 15/16 650 66.3 480
1 (25.4) 11/2 970 99.0 715
11/4 (31.7) 17/8 1940 198.0 1430
11/2 (38.1) 21/4 3390 345.0 2500
Metric Grade 8.8 Bolts
Bolt Size Hexagon (A/F) Torque Settings
(mm) mm Nm kgf m lbf ft
M5 (5) 8 7 0.7 5
M6 (6) 10 12 1.2 9
M8 (8) 13 28 3.0 21
M10 (10) 17 56 5.7 42
M12 (12) 19 98 10 72
M16 (16) 24 244 25 180
M20 (20) 30 476 48 352
M24 (24) 36 822 84 607
M30 (30) 46 1633 166 1205
M36 (36) 55 2854 291 2105
Metric Grade 12.9 Bolts
Bolt Size Torque Settings
(mm) Nm kgf m lbf ft
M8 (8) 48 4.9 35
M10 (10) 94 9.6 69
M12 (12) 166 16.9 122
M14 (14) 320 32.6 236
M16 (16) 400 40.8 295
Note: All bolts used on the drivehead are high tensile and must not be replaced by bolts of a lesser tensile specification.
2 - 1
Section 1 General Information
9803/9285
Section 1
2 - 1
Issue 1
7. 3 - 1
Section 1 General Information
9803/9285
Section 1
3 - 1
Issue 1
Service Tools Numerical List
Page No.
4003/0211 Anti-Seize Paste 5 - 1
4101/0250 Loctite 243 5 - 1
4101/0251 Loctite 242 5 - 1
4101/0451 Loctite 932 5 - 1
4102/0552 Loctite 275 5 - 1
4102/1212 Loctite 574 or Permabond A136 5 - 1
4102/1951 Loctite 577 5 - 1
4103/0955 Superbonder 5 - 1
4104/0251 Activator (Aerosol) 5 - 1
4104/0253 Activator (Bottle) 5 - 1
4104/1557 Cleaner/Degreaser 5 - 1
829/30405 Spacer 12.625 mm thick 4 - 3
829/30406 Spacer 12.675 mm thick 4 - 3
829/30407 Spacer 12.725 mm thick 4 - 3
829/30408 Spacer 12.775 mm thick 4 - 3
829/30409 Spacer 12.825 mm thick 4 - 3
829/30410 Spacer 12.875 mm thick 4 - 3
829/30411 Spacer 12.925 mm thick 4 - 3
829/30412 Spacer 12.975 mm thick 4 - 3
829/30413 Spacer 13.025 mm thick 4 - 3
829/30414 Spacer 13.075 mm thick 4 - 3
829/30415 Spacer 13.125 mm thick 4 - 3
829/30416 Spacer 13.175 mm thick 4 - 3
829/30417 Spacer 13.225 mm thick 4 - 3
892/00174 Measuring Cup - Pinion Head Bearing 4 - 1
892/00333 Heavy Duty Socket 4 - 1
892/00812 Drive Coupling Spanner 4 - 1
892/00817 Heavy Duty Socket 4 - 1
892/00818 Heavy Duty Socket 4 - 1
892/00819 Heavy Duty Socket 4 - 1
892/00918 Setting Tool Kit 4 - 3
892/01075 Support Bracket 4 - 3
892/01085 Oil Seal Insertion Tool 4 - 2
892/01166 Spring Compression Tool 4 - 2
892/01167 Extension Rod 4 - 2
892/00822 Spring Socket for Driveshaft Bolts 4 - 1
921/01900 Shim Kit - Pinion Head Bearing 4 - 1
921/52601 Spacer 12.750 mm thick 4 - 3
921/52602 Spacer 12.800 mm thick 4 - 3
921/52603 Spacer 12.850 mm thick 4 - 3
921/52604 Spacer 12.900 mm thick 4 - 3
921/52605 Spacer 12.950 mm thick 4 - 3
921/52606 Spacer 13.000 mm thick 4 - 3
921/52607 Spacer 13.050 mm thick 4 - 3
921/52608 Spacer 13.100 mm thick 4 - 3
921/52609 Spacer 13.150 mm thick 4 - 3
921/52610 Spacer 13.200 mm thick 4 - 3
921/52611 Spacer 13.250 mm thick 4 - 3
921/52626 Spacer 14.000 mm thick 4 - 3
921/52627 Spacer 14.200 mm (Service Use) 4 - 3
921/52628 Spacer 12.600 mm thick 4 - 3
921/52629 Spacer 12.650 mm thick 4 - 3
921/52630 Spacer 12.700 mm thick 4 - 3
921/53400 Spacer Kit 4 - 3
921/53401 Spacer 13.400 mm thick 4 - 3
921/53402 Spacer 13.425 mm thick 4 - 3
921/53403 Spacer 13.450 mm thick 4 - 3
921/53404 Spacer 13.475 mm thick 4 - 3
921/53405 Spacer 13.500 mm thick 4 - 3
921/53406 Spacer 13.525 mm thick 4 - 3
921/53407 Spacer 13.550 mm thick 4 - 3
921/53408 Spacer 13.575 mm thick 4 - 3
921/53409 Spacer 13.600 mm thick 4 - 3
Page No.
921/53410 Spacer 13.625 mm thick 4 - 3
921/53411 Spacer 13.650 mm thick 4 - 3
921/53412 Spacer 13.675 mm thick 4 - 3
921/53413 Spacer 13.700 mm thick 4 - 3
921/53414 Spacer 13.725 mm thick 4 - 3
921/53415 Spacer 13.750 mm thick 4 - 3
921/53416 Spacer 13.775 mm thick 4 - 3
921/53417 Spacer 13.800 mm thick 4 - 3
921/53418 Spacer 13.825 mm thick 4 - 3
921/53419 Spacer 13.850 mm thick 4 - 3
921/53420 Spacer 13.875 mm thick 4 - 3
921/53421 Spacer 13.900 mm thick 4 - 3
921/53422 Spacer 13.925 mm thick 4 - 3
921/53423 Spacer 13.950 mm thick 4 - 3
921/53424 Spacer 13.275 mm thick 4 - 3
921/53425 Spacer 13.300 mm thick 4 - 3
921/53426 Spacer 13.325 mm thick 4 - 3
921/53427 Spacer 13.350 mm thick 4 - 3
921/53428 Spacer 13.375 mm thick 4 - 3
992/04000 Torque Multiplier 4 - 1
992/04800 Flange Spanner 4 - 1
993/70111 Breakback Torque Wrench 4 - 3
998/10567 M24 Adapter 4 - 3
8. 892/00812 Drive Coupling Spanner for axle
yoke couplings
4 - 1
Section 1 General Information
9803/9285
Section 1
4 - 1
Issue 1
892/00817 17 mm A/F x 3/4 in square drive
892/00818 22 mm A/F x 3/4 in square drive
892/00819 15 mm A/F x 1/2 in square drive
892/00333 19 mm A/F x 3/4 in square drive
S216290
S196720
992/04000
Torque Multiplier (use in conjunction with a torque wrench to
give a 5:1 multiplication when tightening pinion nuts)
S197030
892/00822
Spring Socket for Driveshaft
Bolts
892/00174
Measuring Cup - Pinion Head
Bearing S190770
992/04800
Flange Spanner - for locking
pinion flange while pinion nut
is slackened or torque set
S197040
921/01900 Shim Kit - Pinion Head Bearing
Comprises:
Note: After using a shim, obtain a replacement to keep the
set complete.
Shim
thickness
mm
921/01901 0.15
921/01902 0.20
921/01903 0.25
921/01904 0.50
921/01905 1.00 747030
9. Service Tools (cont’d)
716550
892/01166
Spring Compression Tool - for compressing differential
lock spring (Soft Engage Differential Lock Only)
4 - 2
Section 1 General Information
9803/9285
Section 1
4 - 2
Issue 1
716560
892/01167
Extension Rod - for inserting side nut locking pin
(Soft Engage Differential Lock only) 716560
716550
892/01085
Oil Seal Insertion Tool
10. 4 - 3
Section 1 General Information
9803/9285
Section 1
4 - 3
Issue 1
Service Tools (cont'd)
A270850
921/53400 Spacer Kit
Comprises of:
Spacer thickness
921/52628 12.600 mm
829/30405 12.625 mm
921/52629 12.650 mm
829/30406 12.675 mm
921/52630 12.700 mm
829/30407 12.725 mm
921/52601 12.750 mm
829/30408 12.775 mm
921/52602 12.800 mm
829/30409 12.825 mm
921/52603 12.850 mm
829/30410 12.875 mm
921/52604 12.900 mm
829/30411 12.925 mm
921/52605 12.950 mm
829/30412 12.975 mm
921/52606 13.000 mm
829/30413 13.025 mm
921/52607 13.050 mm
829/30414 13.075 mm
921/52608 13.100 mm
829/30415 13.125 mm
921/52609 13.150 mm
829/30416 13.175 mm
921/52610 13.200 mm
829/30417 13.225 mm
921/52611 13.250 mm
921/53424 13.275 mm
921/53425 13.300 mm
921/53426 13.325 mm
921/53427 13.350 mm
921/53428 13.375 mm
921/53401 13.400 mm
921/53402 13.425 mm
921/53403 13.450 mm
921/53404 13.475 mm
921/53405 13.500 mm
921/53406 13.525 mm
921/53407 13.550 mm
921/53408 13.575 mm
921/53409 13.600 mm
921/53410 13.625 mm
921/53411 13.650 mm
921/53412 13.675 mm
921/53413 13.700 mm
921/53414 13.725 mm
921/53415 13.750 mm
921/53416 13.775 mm
921/53417 13.800 mm
921/53418 13.825 mm
921/53419 13.850 mm
921/53420 13.875 mm
921/53421 13.900 mm
921/53422 13.925 mm
921/53423 13.950 mm
921/52626 14.000 mm
Note: After using a spacer, obtain a replacement to keep
the set complete.
Solid Spacer Setting Kit
892/00918 Setting Tool Kit
921/52627 Spacer 14.20 mm (Service Use)
993/70111 Breakback Torque Wrench
998/10567 M24 Adapter
892/01075 Support Bracket
A396960
11. 5 - 1
Section 1 General Information
9803/9285
Section 1
5 - 1
Issue 1
Sealing and Retaining Compounds
Loctite 574 or A medium strength sealant suitable for all
Permabond A136 sizes of gasket flanges, and for hydraulic
fittings of 25-65 mm diameter. 4102/1212
Loctite 275 or For all sizes of flange where the strength
Permabond A140 of the joint is important. † 4102/0552
Loctite 932 or For all retaining parts which are likely to
Permabond A137 be dismantled and for use on threads larger
than 50 mm dia. 4101/0451
Loctite 242 or A medium strength locking fluid for sealing
Permabond A113 and retaining nuts, bolts, and screws up to
50 mm diameter, and for hydraulic fittings
up to 25 mm diameter. † 4101/0251
Loctite 243 A medium strength locking fluid similar
to Loctite 242 but with greater resistance
to thread contamination. 4101/0250
Loctite 648 or For retaining parts which are unlikely to be
Permabond A118 dismantled. 4101/0651
Loctite 577 A medium strength thread sealing compound. 4102/1951
Superbonder Bonding/Sealant † 4103/0955
Loctite Activator A cleaning primer which speeds the curing
rate of anaerobic products. † 4104/0251 Aerosol
† 4104/0253 Bottle
Cleaner/Degreaser For degreasing components prior to use of
anaerobic adhesives and sealants. † 4104/1557 Aerosol
Anti-Seize Paste A compound used for assembly and prevention
of thread seizure. † 4003/0211
Note: The above list is the range of sealants and retaining compounds available. Items marked † are those referred to within
the sections.
12. i
Section 2 Care & Safety
9803/9285
Section 2
i
Issue 1
Contents Page No.
Safety Notices 1 - 1
General Safety 2 - 1
Operating Safety 3 - 1
Maintenance Safety 4 - 1
13. 1 - 1
Section 2 Care & Safety
9803/9285
Section 2
1 - 1
Issue 1
Safety Notices
In this publication there are safety notices. Each notice starts with a signal word. The
signal word meanings are given below.
! DANGER
Denotes an extreme hazard exists. If proper precautions are not taken, it is highly
probable that the operator (or others) could be killed or seriously injured.
INT-1-2-1
! WARNING
Denotes a hazard exists. If proper precautions are not taken, the operator (or others)
could be killed or seriously injured.
INT-1-2-2
! CAUTION
Denotes a reminder of safety practices. Failure to follow these safety practices could
result in injury to the operator (or others) and possible damage to the machine.
INT-1-2-3
14. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
15. 2 - 1
All machinery, whether mobile or static, can be hazardous.
When equipment is correctly operated and properly
maintained it can be safe to work with. But when it is
carelessly operated or poorly maintained it can become a
danger.
Do not work with any equipment until you are sure that it is
serviceable, that you know how to control it and be aware of
all relevant safety requirements.
If the equipment covered by this manual forms part of a
larger product (eg. a vehicle) be sure to observe the safety
requirements which relate to the product as a whole, as well
as those given in this manual.
On this and the following pages and throughout this manual,
you will find safety messages. Please read and understand
these safety messages before using and working on the
equipment covered in this manual.
Make sure you also read and understand all other safety
messages contained in operator handbooks and service
manuals concerned with the product of which this
equipment forms part.
Remember
BE CAREFUL
BE ALERT
BE SAFE
General Safety
! WARNING
Decals
You can be injured if you do not obey the decal safety
instructions. Keep decals clean. Replace unreadable or
missing decals with new ones before operating the machine.
Make sure replacement parts include warning decals where
necessary.
INT-1-3-4
! WARNING
Care and Alertness
All the time you are working with or on the machine, take
care and stay alert. Always be careful. Always be alert for
hazards.
INT-1-3-5
! WARNING
Clothing
You can be injured if you do not wear the proper clothing.
Loose clothing can get caught in the machinery. Wear
protective clothing to suit the job. Examples of protective
clothing are: a hard hat, safety shoes, safety glasses, a well
fitting overall, ear-protectors and industrial gloves. Keep
cuffs fastened. Do not wear a necktie or scarf. Keep long
hair restrained.
INT-1-3-6
! WARNING
Lifting Equipment
You can be injured if you use faulty lifting equipment. Make
sure that lifting equipment is in good condition. Make sure
that lifting tackle complies with all local regulations and is
suitable for the job. Make sure that lifting equipment is
strong enough for the job.
INT-1-3-7
! WARNING
Raised Attachments
Raised attachments can fall and injure you. Do not walk or
work under raised attachments unless they are safely
blocked.
INT-1-3-8
! WARNING
Alcohol and Drugs
It is extremely dangerous to operate machinery when under
the influence of alcohol or drugs. Do not consume alcoholic
drinks or take drugs before of whilst operating the machine
or attachments. Be aware of medicines which can cause
drowsiness.
INT-1-3-9
Section 2 Care & Safety
9803/9285
Section 2
2 - 1
Issue 1
16. 3 - 1
Operating Safety
! WARNING
Equipment Condition
Defective equipment can injure you or others. Do not
operate equipment which is defective or has missing parts.
Make sure all maintenance procedures are completed before
using the equipment
! WARNING
Controls
You or others can be killed or seriously injured if you operate
the control levers from outside the cab. Operate the control
levers only when you are correctly seated inside the cab.
INT-2-1-3
! WARNING
Equipment Limits
Operating equipment beyond its design limits can damage
the equipment, it can also be dangerous. Do not operate the
equipment outside its limits. Do not try to upgrade the
equipment performance with unapproved modifications.
! WARNING
Engine/Steering Failure
If the engine or steering on the ‘parent’ machine fails, stop
the machine as quickly as possible. Do not operate the
machine until the fault has been corrected.
! WARNING
Engine
The engine on the ‘parent’ machine has rotating parts. Do
not open the engine cover while the engine is running. Do
not use the machine with the cover open.
! DANGER
Sparks
Explosions and fire can be caused by sparks from the
exhaust or the electrical system. Do not use the machine in
closed areas where there is flammable material, vapour or
dust.
INT-2-2-10
! WARNING
Exhaust Gases
Breathing the ‘parent’ machine exhaust gases can harm and
possibly kill you. Do not operate the machine in closed
spaces without making sure there is good ventilation. If
possible, fit an exhaust extension. If you begin to feel
drowsy, stop the machine at once. Get out of the cab into
fresh air.
! WARNING
Communications
Bad communications can cause accidents. Keep people
around you informed of what you will be doing. If you will be
working with other people, make sure any hand signals that
may be used are understood by everybody. Work sites can
be noisy, do not rely on spoken commands.
INT-2-2-3
Section 2 Care & Safety
9803/9285
Section 2
3 - 1
Issue 1
17. 4 - 1
Maintenance Safety
! WARNING
Repairs
Do not try to do repairs or any other type of maintenance
work you do not understand. To avoid injury and/or damage
get the work done by a specialist engineer.
GEN-1-5
! WARNING
Modifications and Welding
Non-approved modifications can cause injury and damage.
Welds on cast iron can weaken the structure and break. Do
not weld cast iron. Contact your distributor for advice before
modifying the equipment.
! WARNING
Metal Splinters
You can be injured by flying metal splinters when driving
metal pins in or out. Use a soft faced hammer or drift to
remove and fit metal pins. Always wear safety glasses.
INT-3-1-3
! WARNING
Electrical Circuits
Understand the electrical circuit before connecting or
disconnecting an electrical component. A wrong connection
can cause injury and/or damage.
INT-3-1-4
! WARNING
Battery Gases
Batteries give off explosive gases. Keep flames and sparks
away from the vehicle battery. Do not smoke close to the
battery. Make sure there is good ventilation in closed areas
where batteries are being used or charged. Do not check the
battery charge by shorting the terminals with metal; use a
hydrometer or voltmeter.
! WARNING
Hydraulic Fluid
Fine jets of hydraulic fluid at high pressure can penetrate the
skin. Do not use your fingers to check for hydraulic fluid
leaks. Do not put your face close to suspected leaks. Hold a
piece of cardboard close to suspected leaks and then
inspect the cardboard for signs of hydraulic fluid. If hydraulic
fluid penetrates your skin, get medical help immediately.
INT-3-1-10/1
! DANGER
Hydraulic Pressure
Hydraulic fluid at system pressure can injure you. Before
disconnecting or connecting hydraulic hoses, stop the
engine and operate the controls to release pressure trapped
in the hoses. Make sure the engine cannot be started while
the hoses are open.
INT-3-1-11/1
! WARNING
Oil
Oil is toxic. If you swallow any oil, do not induce vomiting,
seek medical advice. Used engine oil contains harmful
contaminants which can cause skin cancer. Do not handle
used engine oil more than necessary. Always use barrier
cream or wear gloves to prevent skin contact. Wash skin
contaminated with oil thoroughly in warm soapy water. Do
not use petrol, diesel fuel or paraffin to clean your skin.
INT-3-2-3
! WARNING
Soft Ground
A machine can sink into soft ground. Never work under a
machine on soft ground.
INT-3-2-4
! WARNING
Always wear safety glasses when dismantling assemblies
containing components under pressure from springs. This
will protect against eye injury from components accidently
flying out.
GEN 6-2
! CAUTION
Cleaning
Cleaning metal parts with incorrect solvents can cause
corrosion. Use only recommended cleaning agents and
solvents.
INT-3-2-11
! CAUTION
'O' rings, Seals and Gaskets
Badly fitted, damaged or rotted 'O' rings, seals and gaskets
can cause leakages and possible accidents. Renew
whenever disturbed unless otherwise instructed. Do not use
Triochloroethane or paint thinners near 'O' rings and seals.
INT-3-2-12
Section 2 Care & Safety
9803/9285
Section 2
4 - 1
Issue 1