This service manual provides instructions for servicing JCB excavators models JS115 through JS190. It contains sections on the machine body and framework, operator station, engine, driveline, hydraulic system, electrical system and other components. The section on the engine covers topics like removing and installing the rocker cover, camshaft, tappets and oil sump. Precise procedures are given along with torque specifications and safety warnings.
Caterpillar cat 432 f backhoe loader (prefix pxr) service repair manual (pxr0...fujsefkxswksemm
This document provides assembly instructions for the axle housing of a 432F backhoe loader. It outlines 34 steps to assemble components like bearings, brake discs, seals and pins. Special tools are required and cleanliness is important. Measurements are taken and shims selected to achieve proper torque specifications. Springs and cylinders are installed last.
Caterpillar cat 432 f backhoe loader (prefix lnr) service repair manual (lnr0...fujsefkxswksemm
This document provides assembly instructions for a 432F backhoe loader transmission. It describes assembling the transmission case and installing various components like shafts, gears, seals and bearings. Special tools are required and safety precautions mentioned. Assembly is done in main components that are then assembled together. Clearances are checked using gauges and shims added or removed to get the specified tolerances.
Caterpillar cat 432 e backhoe loader (prefix rxs) service repair manual (rxs0...fujsefkxswksemm
This document provides instructions for removing and installing an engine on a 432E backhoe loader. The removal process involves 50 steps that disconnect wiring harnesses, hoses, tubes, and remove mounting hardware. The installation is the reverse of removal, requiring reconnecting all components and tightening mounting bolts to the specified torques. Special tools are required to lift and support the heavy engine assembly during removal and installation.
Caterpillar cat 432 e backhoe loader (prefix jba) service repair manual (jba0...fujsefkxswksemm
The document provides step-by-step instructions for disassembling the transmission of a 432E Backhoe Loader. It lists required tools and outlines the procedure for removing various transmission components including gears, shafts, bearings, seals and other parts. Detailed illustrations accompany each step to show how to use specialized tools to compress springs, remove retaining rings, and disassemble clutches, synchronizers and other mechanisms. Safety notices are included to warn of potential injury from compressed springs or other hazards.
New holland c232 tier 4 compact track loader service repair manual [ndm451672...fujsefkxswksemm
This service manual provides instructions for servicing engines and components for New Holland 200 Series Skid Steer Loaders and Compact Track Loaders including removing the engine by draining fluids, disconnecting electrical components and hoses, removing covers and fans, and then fully removing the engine. Specific models and applicable component removal steps are provided for C232, C238, L223, L225 and L230 Tier 4 engines.
Caterpillar cat 432 e backhoe loader (prefix bxe) service repair manual (bxe0...fujsefkxswksemm
This document provides instructions for removing and installing various engine components on a Caterpillar 432E backhoe loader, including:
- Removing and installing V-belts
- Removing and installing the fan, fan drive, and alternator
- Procedures include removing set screws, disconnecting wiring harnesses, adjusting belt tension, and reconnecting components.
The summary provides an overview of the types of components covered in the repair manual and the basic removal and installation steps involved without including excessive technical details.
Caterpillar cat 432 d backhoe loader (prefix wep) service repair manual (wep0...fujsefkxswksemm
This document provides instructions for removing and installing an engine oil cooler and engine oil relief valve on a Caterpillar 3054C engine. The summary is:
1. Drain coolant and oil from the engine oil cooler before removing housing bolts and seals.
2. Clean mating surfaces and install new seals and gasket before bolting the housing back onto the engine with new bolts.
3. Remove the plug and spring to access the engine oil relief valve plunger. Inspect parts and lubricate before reinstalling.
4. Drain the oil pan before removing bolts to access the engine oil pump. Remove bolts and suction pipe to remove the pump assembly.
Caterpillar cat 432 d backhoe loader (prefix tdr) service repair manual (tdr0...fujsefkxswksemm
This document provides instructions for removing and assembling components of a Caterpillar 3054C engine, including the cylinder head. The removal procedure for the cylinder head involves first draining fluids, removing related components like the exhaust manifold and fuel injectors, and then loosening and removing mounting screws to lift the cylinder head off the engine block. Proper care is emphasized to prevent damage to parts and contain fluids during disassembly.
Caterpillar cat 432 f backhoe loader (prefix pxr) service repair manual (pxr0...fujsefkxswksemm
This document provides assembly instructions for the axle housing of a 432F backhoe loader. It outlines 34 steps to assemble components like bearings, brake discs, seals and pins. Special tools are required and cleanliness is important. Measurements are taken and shims selected to achieve proper torque specifications. Springs and cylinders are installed last.
Caterpillar cat 432 f backhoe loader (prefix lnr) service repair manual (lnr0...fujsefkxswksemm
This document provides assembly instructions for a 432F backhoe loader transmission. It describes assembling the transmission case and installing various components like shafts, gears, seals and bearings. Special tools are required and safety precautions mentioned. Assembly is done in main components that are then assembled together. Clearances are checked using gauges and shims added or removed to get the specified tolerances.
Caterpillar cat 432 e backhoe loader (prefix rxs) service repair manual (rxs0...fujsefkxswksemm
This document provides instructions for removing and installing an engine on a 432E backhoe loader. The removal process involves 50 steps that disconnect wiring harnesses, hoses, tubes, and remove mounting hardware. The installation is the reverse of removal, requiring reconnecting all components and tightening mounting bolts to the specified torques. Special tools are required to lift and support the heavy engine assembly during removal and installation.
Caterpillar cat 432 e backhoe loader (prefix jba) service repair manual (jba0...fujsefkxswksemm
The document provides step-by-step instructions for disassembling the transmission of a 432E Backhoe Loader. It lists required tools and outlines the procedure for removing various transmission components including gears, shafts, bearings, seals and other parts. Detailed illustrations accompany each step to show how to use specialized tools to compress springs, remove retaining rings, and disassemble clutches, synchronizers and other mechanisms. Safety notices are included to warn of potential injury from compressed springs or other hazards.
New holland c232 tier 4 compact track loader service repair manual [ndm451672...fujsefkxswksemm
This service manual provides instructions for servicing engines and components for New Holland 200 Series Skid Steer Loaders and Compact Track Loaders including removing the engine by draining fluids, disconnecting electrical components and hoses, removing covers and fans, and then fully removing the engine. Specific models and applicable component removal steps are provided for C232, C238, L223, L225 and L230 Tier 4 engines.
Caterpillar cat 432 e backhoe loader (prefix bxe) service repair manual (bxe0...fujsefkxswksemm
This document provides instructions for removing and installing various engine components on a Caterpillar 432E backhoe loader, including:
- Removing and installing V-belts
- Removing and installing the fan, fan drive, and alternator
- Procedures include removing set screws, disconnecting wiring harnesses, adjusting belt tension, and reconnecting components.
The summary provides an overview of the types of components covered in the repair manual and the basic removal and installation steps involved without including excessive technical details.
Caterpillar cat 432 d backhoe loader (prefix wep) service repair manual (wep0...fujsefkxswksemm
This document provides instructions for removing and installing an engine oil cooler and engine oil relief valve on a Caterpillar 3054C engine. The summary is:
1. Drain coolant and oil from the engine oil cooler before removing housing bolts and seals.
2. Clean mating surfaces and install new seals and gasket before bolting the housing back onto the engine with new bolts.
3. Remove the plug and spring to access the engine oil relief valve plunger. Inspect parts and lubricate before reinstalling.
4. Drain the oil pan before removing bolts to access the engine oil pump. Remove bolts and suction pipe to remove the pump assembly.
Caterpillar cat 432 d backhoe loader (prefix tdr) service repair manual (tdr0...fujsefkxswksemm
This document provides instructions for removing and assembling components of a Caterpillar 3054C engine, including the cylinder head. The removal procedure for the cylinder head involves first draining fluids, removing related components like the exhaust manifold and fuel injectors, and then loosening and removing mounting screws to lift the cylinder head off the engine block. Proper care is emphasized to prevent damage to parts and contain fluids during disassembly.
Caterpillar cat 322 c excavator (prefix daa) service repair manual (daa00001 ...fujsefkxswksemm
The document provides instructions for disassembling and assembling the pilot valve (joystick) of a 322C excavator. It consists of 20 steps for disassembly and 23 steps for assembly. Key parts of the pilot valve that are disassembled include the spool assembly, springs, seals, rods and plugs. Cleanliness is emphasized during both disassembly and assembly. O-rings and seals are replaced during assembly.
New holland br6080 round balers service repair manualfujsefkxswksemm
This service manual provides instructions for servicing and repairing various systems of a baler, including hydraulic, electrical, electronic, lubrication, engine, transmission, axles, brakes, wheels, and crop processing systems. It outlines safety procedures and contains diagrams, part numbers, specifications and troubleshooting information. Torque specifications are provided for hardware.
This document provides instructions for removing and installing a governor from a Caterpillar 3116 engine. It describes:
1. Removing fuel and oil lines, clips, bolts and pins to detach the governor from the engine.
2. Installing new O-rings, attaching the governor to the engine with bolts and pins, and reconnecting fuel and oil lines.
3. Checking the fuel setting adjustment after installation.
It also references other documents for additional governor information and maintenance guidelines.
Caterpillar cat 320 c l excavator (prefix anb) service repair manual (anb0000...fujsefkxswksemm
The document provides instructions for removing and installing various components on a 320C excavator, including:
1) Removing and installing actuator motors that control air dampers and distributors by disconnecting wiring harnesses, removing screws and linkage attachments, and reversing the process for installation.
2) Removing and installing a fan speed control unit by disconnecting its wiring harness, removing mounting screws, and reversing the process for installation.
3) Removing and installing an ambient air temperature sensor by removing mounting plates and bolts, disconnecting its wiring harness, and reversing the process for installation.
4) Removing and installing a coolant temperature sensor by disconnecting its wiring harness and reversing the process for installation.
Caterpillar cat 320 c excavator (prefix sbn) service repair manual (sbn00001 ...fujsefkxswksemm
This document provides instructions for removing and installing a flywheel housing on a 320C excavator engine. It describes:
1. Removing the electric starting motor and flywheel/ring gear as preliminary steps.
2. Using various tools like a link bracket and driver group to remove the 12 bolts securing the adapter to the flywheel housing and then remove the housing.
3. Reversing the process to install a new or repaired flywheel housing, ensuring all bolts are properly tightened.
Caterpillar cat 320 c excavator (prefix bcn) service repair manual (bcn00001 ...fujsefkxswksemm
This document provides instructions for removing and installing various fuel system components on a Caterpillar 320C excavator engine, including:
- Fuel filter base
- Fuel injection lines
- Fuel injection nozzles
- Fuel shutoff solenoid
- Fuel injection pump
The procedures describe disconnecting fuel lines, removing mounting bolts and other hardware, taking care to plug openings to prevent contamination. Proper tools are listed and installation is the reverse of removal. Safety notices warn to contain fluids and keep parts clean.
Case ih stx325 steiger tractor service repair manual pin jee0102001 and afterfujsefkxswksemm
The document provides instructions for removing and installing the engine on STX Steiger tractors. It is a 12-step process for removal that includes draining fluids, disconnecting wiring and hoses, and using an overhead hoist to lift the engine out of the tractor. The 13-step installation process reverses these steps, lowering the engine back into place and reconnecting all components. Safety warnings are provided throughout regarding working around heavy components, hot or pressurized fluids, and ensuring the engine is properly supported during removal and installation.
Caterpillar cat 951 c track loader (prefix 69h) service repair manual (69h018...fujsefkxswksemm
This document provides instructions for servicing a 951B track loader. It includes general instructions for disassembly and assembly, safety procedures, cleaning and handling of parts, removal and installation of components, use of service tools, and information on specific components like bearings, bolts, gaskets and more. The instructions aim to ensure repairs are done correctly and safely.
Caterpillar cat 931 b track loader (prefix 30y) service repair manual (30y000...fujsefkxswksemm
This service repair manual provides instructions for removing and installing various components of a Caterpillar 931B track loader, including:
1) Track roller frames, which are removed by taking off guards, yokes, and bolts, and lifted with straps and a hoist.
2) Pivot shafts, by removing seals, bearings, and support assemblies after draining oil and using straps and hoists.
3) Equalizer bars, which are removed by taking off guards and pins after jacking up the machine.
Caterpillar cat 931 b track loader (prefix 26y) service repair manual (26y000...fujsefkxswksemm
This document provides instructions for removing and installing steering clutches on a 931B track loader. It begins by listing the necessary preparatory steps of removing the hydraulic tank, fuel tank, battery, brake linkage, and disconnecting hoses and wiring. It then details removing each individual component of the steering clutch assembly, including the cylinder, plates, springs, housing, and linkages. The instructions conclude by describing how to reinstall each part in reverse order and providing final checks and replacements of ancillary components.
This document provides safety warnings and instructions for removing and installing an engine. It contains 51 steps to remove the engine, which include disconnecting batteries, draining coolant, removing hoses, wires, and other components. It then lists 40 steps to reinstall the engine, reversing the removal process and reconnecting all components. The purpose is to provide a detailed procedure for safely removing and reinstalling an engine.
Caterpillar cat 931 b track loader (prefix 4sc) service repair manual (4sc000...fujsefkxswksemm
This document provides instructions for removing and installing track carrier rollers, track roller guards, and track rollers on a Caterpillar 931B track loader. It describes loosening the track, removing covers and guards, and then removing rollers by taking off bolts and lockwashers. Reinstallation involves cleaning surfaces, applying lubricant, pressing in bearings, and installing seals before reattaching rollers and guards with bolts. Detailed steps are provided for disassembling and assembling the individual components of the track roller assemblies.
Caterpillar cat 432 d backhoe loader (prefix bld) service repair manual (bld0...fujsefkxswksemm
This document provides instructions for disassembling the transmission of a 432D Backhoe Loader. It lists the required tools and begins by having the transmission removed per the specified procedure. The transmission is then disassembled into its major components which are further disassembled. Steps include removing the output shafts, bearings, gears, seals, springs and other internal parts. Precautions are given for cleaning parts and containing fluids during disassembly.
Caterpillar cat 432 d backhoe loader (prefix bld) service repair manual (bld0...fujsefkxswksemm
This document provides instructions for removing and installing exhaust manifolds and air inlet manifolds on Caterpillar 3054 engines. It describes the removal and installation procedures in detail with illustrations. The procedures involve removing mounting bolts/nuts, gaskets, and related components in a specified sequence. Precautions are provided to keep parts clean and contain fluids.
Caterpillar cat 430 e backhoe loader (prefix swc) service repair manual (swc0...fujsefkxswksemm
This document provides instructions for disassembling the transmission of a 430E Backhoe Loader. It describes:
1. Removing the transmission and draining the oil.
2. Removing various components of the transmission including gears, shafts, bearings, and seals using specialized tools.
3. Removing additional components from the transmission case such as bearing cups, seals, sensors and valves.
Detailed steps and illustrations are provided for each part removal. Safety notices are included and specialized tools required are listed.
Case ih stx275 steiger tractor service repair manual pin jee0102001 and afterfujsefkxswksemm
The document provides instructions for removing and installing the engine on STX Steiger tractors. It is a 12-step process for removal that includes draining fluids, disconnecting wiring and hoses, and using an overhead hoist to lift the engine out of the tractor. The 13-step installation process reverses these steps, lowering the engine back into place and reconnecting all components. Safety warnings are provided throughout regarding working around heavy components, hot or pressurized fluids, and ensuring the engine is properly supported during removal and installation.
Caterpillar cat 428 e backhoe loader (prefix snl) service repair manual (snl0...fujsefkxswksemm
The document provides instructions for removing a hydraulic tank from a 428E backhoe loader. It involves 19 steps including draining the hydraulic oil, removing various panels, covers, and floorplates, and disconnecting hoses and harness assemblies to access and remove the hydraulic tank.
Caterpillar cat 428 e backhoe loader (prefix dxc) service repair manual (dxc0...fujsefkxswksemm
This document provides instructions for removing and installing a bucket on a 428E backhoe loader. It describes:
1. Releasing hydraulic pressure before removal.
2. Disconnecting hoses from the lower link assemblies.
3. Removing retaining rings, washers and pins from the lower links.
4. Attaching a lifting device and removing the retaining ring, washers and pin from the other side.
5. Removing the bucket.
Caterpillar cat 428 e backhoe loader (prefix dph) service repair manual (dph0...fujsefkxswksemm
This document provides instructions for removing and installing an engine water pump on a 428E backhoe loader. The removal procedure involves draining coolant, removing hoses and bolts, and removing the water pump. The installation procedure specifies cleaning parts, installing a new joint, aligning the water pump using guide bolts, and reinstalling bolts. Proper cleanup and alignment of parts is emphasized to prevent contamination and ensure correct assembly.
Caterpillar cat 428 d backhoe loader (prefix mbm) service repair manual (mbm0...fujsefkxswksemm
The document provides instructions for assembling the transmission of a 428D backhoe loader. It describes cleaning and lubricating transmission parts before assembly. It then provides step-by-step instructions to assemble the transmission case, input shaft, reverse shaft, output shafts, and to install the assembled transmission. Key steps include pressing components with special tools, heating bearings to install, and verifying shaft play clearance with a dial indicator gauge.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Caterpillar cat 322 c excavator (prefix daa) service repair manual (daa00001 ...fujsefkxswksemm
The document provides instructions for disassembling and assembling the pilot valve (joystick) of a 322C excavator. It consists of 20 steps for disassembly and 23 steps for assembly. Key parts of the pilot valve that are disassembled include the spool assembly, springs, seals, rods and plugs. Cleanliness is emphasized during both disassembly and assembly. O-rings and seals are replaced during assembly.
New holland br6080 round balers service repair manualfujsefkxswksemm
This service manual provides instructions for servicing and repairing various systems of a baler, including hydraulic, electrical, electronic, lubrication, engine, transmission, axles, brakes, wheels, and crop processing systems. It outlines safety procedures and contains diagrams, part numbers, specifications and troubleshooting information. Torque specifications are provided for hardware.
This document provides instructions for removing and installing a governor from a Caterpillar 3116 engine. It describes:
1. Removing fuel and oil lines, clips, bolts and pins to detach the governor from the engine.
2. Installing new O-rings, attaching the governor to the engine with bolts and pins, and reconnecting fuel and oil lines.
3. Checking the fuel setting adjustment after installation.
It also references other documents for additional governor information and maintenance guidelines.
Caterpillar cat 320 c l excavator (prefix anb) service repair manual (anb0000...fujsefkxswksemm
The document provides instructions for removing and installing various components on a 320C excavator, including:
1) Removing and installing actuator motors that control air dampers and distributors by disconnecting wiring harnesses, removing screws and linkage attachments, and reversing the process for installation.
2) Removing and installing a fan speed control unit by disconnecting its wiring harness, removing mounting screws, and reversing the process for installation.
3) Removing and installing an ambient air temperature sensor by removing mounting plates and bolts, disconnecting its wiring harness, and reversing the process for installation.
4) Removing and installing a coolant temperature sensor by disconnecting its wiring harness and reversing the process for installation.
Caterpillar cat 320 c excavator (prefix sbn) service repair manual (sbn00001 ...fujsefkxswksemm
This document provides instructions for removing and installing a flywheel housing on a 320C excavator engine. It describes:
1. Removing the electric starting motor and flywheel/ring gear as preliminary steps.
2. Using various tools like a link bracket and driver group to remove the 12 bolts securing the adapter to the flywheel housing and then remove the housing.
3. Reversing the process to install a new or repaired flywheel housing, ensuring all bolts are properly tightened.
Caterpillar cat 320 c excavator (prefix bcn) service repair manual (bcn00001 ...fujsefkxswksemm
This document provides instructions for removing and installing various fuel system components on a Caterpillar 320C excavator engine, including:
- Fuel filter base
- Fuel injection lines
- Fuel injection nozzles
- Fuel shutoff solenoid
- Fuel injection pump
The procedures describe disconnecting fuel lines, removing mounting bolts and other hardware, taking care to plug openings to prevent contamination. Proper tools are listed and installation is the reverse of removal. Safety notices warn to contain fluids and keep parts clean.
Case ih stx325 steiger tractor service repair manual pin jee0102001 and afterfujsefkxswksemm
The document provides instructions for removing and installing the engine on STX Steiger tractors. It is a 12-step process for removal that includes draining fluids, disconnecting wiring and hoses, and using an overhead hoist to lift the engine out of the tractor. The 13-step installation process reverses these steps, lowering the engine back into place and reconnecting all components. Safety warnings are provided throughout regarding working around heavy components, hot or pressurized fluids, and ensuring the engine is properly supported during removal and installation.
Caterpillar cat 951 c track loader (prefix 69h) service repair manual (69h018...fujsefkxswksemm
This document provides instructions for servicing a 951B track loader. It includes general instructions for disassembly and assembly, safety procedures, cleaning and handling of parts, removal and installation of components, use of service tools, and information on specific components like bearings, bolts, gaskets and more. The instructions aim to ensure repairs are done correctly and safely.
Caterpillar cat 931 b track loader (prefix 30y) service repair manual (30y000...fujsefkxswksemm
This service repair manual provides instructions for removing and installing various components of a Caterpillar 931B track loader, including:
1) Track roller frames, which are removed by taking off guards, yokes, and bolts, and lifted with straps and a hoist.
2) Pivot shafts, by removing seals, bearings, and support assemblies after draining oil and using straps and hoists.
3) Equalizer bars, which are removed by taking off guards and pins after jacking up the machine.
Caterpillar cat 931 b track loader (prefix 26y) service repair manual (26y000...fujsefkxswksemm
This document provides instructions for removing and installing steering clutches on a 931B track loader. It begins by listing the necessary preparatory steps of removing the hydraulic tank, fuel tank, battery, brake linkage, and disconnecting hoses and wiring. It then details removing each individual component of the steering clutch assembly, including the cylinder, plates, springs, housing, and linkages. The instructions conclude by describing how to reinstall each part in reverse order and providing final checks and replacements of ancillary components.
This document provides safety warnings and instructions for removing and installing an engine. It contains 51 steps to remove the engine, which include disconnecting batteries, draining coolant, removing hoses, wires, and other components. It then lists 40 steps to reinstall the engine, reversing the removal process and reconnecting all components. The purpose is to provide a detailed procedure for safely removing and reinstalling an engine.
Caterpillar cat 931 b track loader (prefix 4sc) service repair manual (4sc000...fujsefkxswksemm
This document provides instructions for removing and installing track carrier rollers, track roller guards, and track rollers on a Caterpillar 931B track loader. It describes loosening the track, removing covers and guards, and then removing rollers by taking off bolts and lockwashers. Reinstallation involves cleaning surfaces, applying lubricant, pressing in bearings, and installing seals before reattaching rollers and guards with bolts. Detailed steps are provided for disassembling and assembling the individual components of the track roller assemblies.
Caterpillar cat 432 d backhoe loader (prefix bld) service repair manual (bld0...fujsefkxswksemm
This document provides instructions for disassembling the transmission of a 432D Backhoe Loader. It lists the required tools and begins by having the transmission removed per the specified procedure. The transmission is then disassembled into its major components which are further disassembled. Steps include removing the output shafts, bearings, gears, seals, springs and other internal parts. Precautions are given for cleaning parts and containing fluids during disassembly.
Caterpillar cat 432 d backhoe loader (prefix bld) service repair manual (bld0...fujsefkxswksemm
This document provides instructions for removing and installing exhaust manifolds and air inlet manifolds on Caterpillar 3054 engines. It describes the removal and installation procedures in detail with illustrations. The procedures involve removing mounting bolts/nuts, gaskets, and related components in a specified sequence. Precautions are provided to keep parts clean and contain fluids.
Caterpillar cat 430 e backhoe loader (prefix swc) service repair manual (swc0...fujsefkxswksemm
This document provides instructions for disassembling the transmission of a 430E Backhoe Loader. It describes:
1. Removing the transmission and draining the oil.
2. Removing various components of the transmission including gears, shafts, bearings, and seals using specialized tools.
3. Removing additional components from the transmission case such as bearing cups, seals, sensors and valves.
Detailed steps and illustrations are provided for each part removal. Safety notices are included and specialized tools required are listed.
Case ih stx275 steiger tractor service repair manual pin jee0102001 and afterfujsefkxswksemm
The document provides instructions for removing and installing the engine on STX Steiger tractors. It is a 12-step process for removal that includes draining fluids, disconnecting wiring and hoses, and using an overhead hoist to lift the engine out of the tractor. The 13-step installation process reverses these steps, lowering the engine back into place and reconnecting all components. Safety warnings are provided throughout regarding working around heavy components, hot or pressurized fluids, and ensuring the engine is properly supported during removal and installation.
Caterpillar cat 428 e backhoe loader (prefix snl) service repair manual (snl0...fujsefkxswksemm
The document provides instructions for removing a hydraulic tank from a 428E backhoe loader. It involves 19 steps including draining the hydraulic oil, removing various panels, covers, and floorplates, and disconnecting hoses and harness assemblies to access and remove the hydraulic tank.
Caterpillar cat 428 e backhoe loader (prefix dxc) service repair manual (dxc0...fujsefkxswksemm
This document provides instructions for removing and installing a bucket on a 428E backhoe loader. It describes:
1. Releasing hydraulic pressure before removal.
2. Disconnecting hoses from the lower link assemblies.
3. Removing retaining rings, washers and pins from the lower links.
4. Attaching a lifting device and removing the retaining ring, washers and pin from the other side.
5. Removing the bucket.
Caterpillar cat 428 e backhoe loader (prefix dph) service repair manual (dph0...fujsefkxswksemm
This document provides instructions for removing and installing an engine water pump on a 428E backhoe loader. The removal procedure involves draining coolant, removing hoses and bolts, and removing the water pump. The installation procedure specifies cleaning parts, installing a new joint, aligning the water pump using guide bolts, and reinstalling bolts. Proper cleanup and alignment of parts is emphasized to prevent contamination and ensure correct assembly.
Caterpillar cat 428 d backhoe loader (prefix mbm) service repair manual (mbm0...fujsefkxswksemm
The document provides instructions for assembling the transmission of a 428D backhoe loader. It describes cleaning and lubricating transmission parts before assembly. It then provides step-by-step instructions to assemble the transmission case, input shaft, reverse shaft, output shafts, and to install the assembled transmission. Key steps include pressing components with special tools, heating bearings to install, and verifying shaft play clearance with a dial indicator gauge.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
2. 15 - Engine
42 - Rocker and Fittings
06 - Rocker Cover
15 - 170 9813/7150-1 15 - 170
06 - Rocker Cover
Remove and Install
Before Removal
1. Make sure that the engine is safe to work on. If
the engine has been running, let it cool before
you start the service work.
2. Clean the engine. Refer to Engine - Clean (PIL
15-00).
Figure 199.
B
A
C
A Rocker cover B Bolts
C Gasket D Injector seals
3. 15 - Engine
42 - Rocker and Fittings
06 - Rocker Cover
15 - 171 9813/7150-1 15 - 171
Remove
1. Get access to the engine.
2. Remove the high pressure fuel pipes. Refer to
Fuel Pipes (PIL 18-96).
3. Remove the fuel bleed off fuel pipes. Refer to
Fuel Pipes (PIL 18-96).
4. Disconnect the electrical connectors at the fuel
injectors. Refer to Fuel Injection (PIL 18-18).
5. Disconnect the electrical connector at the coolant
temperature sensor. Refer to Engine Sensors
(PIL 15-84).
6. Move the electrical harness away from the rocker
cover.
7. Remove the bolts and lift the rocker cover from
the cylinder head.
8. Discard the gasket.
9. The rocker cover injector seals must be replaced.
Refer to Injector seals (PIL 18-18).
Install
1. Replacement is the reversal of the removal
procedure.
2. Remove all oil and sludge contamination from
inside the rocker chamber.
3. Renew the injector seals. Refer to Injector seals
(PIL 18-18).
4. Renew the rocker cover gasket.
5. Prevent damage to the seals. Put sleeves/covers
on the four injectors. Apply a rubber lubricant to
the seals and then install the rocker cover.
6. Tighten the bolts to the correct torque value.
7. Remove the sleeves/covers.
After Installation
1. The high pressure fuel pipes must be replaced
with new parts. Refer to Fuel Pipes (PIL 18-96).
2. Start the engine and check for oil and fuel leaks.
Table 72. Torque Values
Item Nm
B 24
4. 15 - Engine
42 - Rocker and Fittings
21 - Tappet
15 - 174 9813/7150-1 15 - 174
21 - Tappet
Remove and Install
Before Removal
1. Drain the oil from the engine.
2. Disconnect and remove the fuel pipes from the
injectors. Refer to (PIL 18-96).
3. Remove the rocker cover. Refer to (PIL 15-42).
4. Remove the fuel injection pump. Refer to (PIL
18-18).
5. Remove the rocker assembly and push rods.
Refer to (PIL 15-42).
6. Remove the starter motor. Refer to (PIL 15-75).
7. Remove the oil sump. Refer to (PIL 15-45).
8. Remove the flywheel. Refer to (PIL 15-54).
9. Remove the flywheel housing. Refer to (PIL
15-54).
10. Rotate the crankshaft until the camshaft timing
pin can be inserted through the gear and into the
aligning hole in the rear gear case.
Figure 200.
A
A Timing pin - camshaft
11. Remove the taper blanking plug and insert
the crankshaft locking pin. The camshaft and
crankshaft locking pins must be in position to lock
the crankshaft and camshaft before removing the
camshaft assembly.
Figure 201.
B
C
B Timing pin - crankshaft
C Blanking plug
12. Remove the fuel injection pump drive gear. Refer
to (PIL 15-51).
Removal
The engine must be inverted. DO NOT attempt
to remove the camshaft and its drive gears with
the engine upright. The tappets and push rods will
fall into the engine and further dismantling will be
required to retrieve them.
1. Remove the camshaft timing pin.
2. Carefully withdraw the camshaft and gear
assembly from the crankcase. Make sure you
fully support the camshaft to prevent the lobes
contacting the bearing surfaces in the crankcase.
The bearing surfaces can easily be damaged by
the sharp hard edges on the cam lobes.
5. 15 - Engine
42 - Rocker and Fittings
21 - Tappet
15 - 175 9813/7150-1 15 - 175
Figure 202.
A
D
A Timing pin - camshaft
D Camshaft and drive gear
3. Access the tappets through the apertures in
the crankcase bedplate next to the crankshaft.
Lift out the tappets from the crankcase using a
suitable magnetic probe. Label the tappets to
ensure replacement in their original positions.
Figure 203.
E
F
E
E Tappet (8 off)
F Magnetic probe
Inspection
1. Inspect the camshaft gear teeth for signs of
damage or excessive wear.
2. Inspect the cam lobes for signs of excessive
wear, scoring or pitting.
3. Inspect the cam bearing surfaces for signs
of excessive wear, or scoring. Check that the
dimensions are within service limits.
4. Inspect the cam bearing surfaces inside the
crankcase for signs of excessive wear, or
scoring. Check that the dimensions are within
service limits.
5. Inspect the bearing surfaces of the tappets for
signs of excessive wear or damage. Check that
the dimensions are within service limits.
6. Inspect the tappet bores inside the crankcase for
signs of excessive wear or damage. Check that
the dimensions are within service limits.
7. If any of the camshaft bearings or lobes are worn
or damaged then the relative oil feed galleries
in the crankcase and camshaft may be blocked.
Make sure all oil ways are clear and free from
debris.
Installation
1. Lubricate the tappets and tappet bores inside the
crankcase with clean engine oil.
2. Insert the tappets in their original positions in the
crankcase using a suitable magnetic probe.
3. Lubricate the camshaft bearing journals inside
the crankcase with clean engine oil.
4. Carefully insert the camshaft assembly into the
crankcase as shown. Support the camshaft
preventing the lobes contacting the bearing
surfaces in the crankcase. Before meshing the
camshaft gear with the crankshaft gear, rotate
the camshaft until the timing hole in the gear
aligns with the dowel hole in the gear casing.
Insert the timing pin to lock the camshaft in this
position.
After Installation
1. Note that the fuel injection pump drive gear
fixing nut is torque tightened as part of the fuel
injection pump replacement procedure. Refer to
(PIL 18-18).
2. Do the procedures in Before Removal in reverse
order.
6. 15 - Engine
42 - Rocker and Fittings
24 - Tappet Cover
15 - 176 9813/7150-1 15 - 176
24 - Tappet Cover
Remove and Install
It is not necessary to remove the tappet covers
unless a new rocker cover is to be installed. It is
necessary to remove the tappet covers to measure
and adjust the valve clearances. Refer to Valve-
Adjust, Valve Clearances (PIL 15-30).
Remove
1. Make sure that the engine is safe to work on. If
the engine has been running, let it cool before
you start the service work.
2. Get access to the engine.
3. Clean the tappet covers and the adjacent areas
of the rocker cover. Refer to Engine - Clean.
Important: Make sure that the screws do not fall
into the engine.
4. Remove the tappet cover screws.
5. Keep the screws away from the engine.
6. Use a screwdriver in the slot to remove the tappet
covers. Make sure that dirt or debris does not fall
into the engine.
Figure 204.
B A
E
BBB B
C
D
A Screws
B Tappet covers
C Slot
D Rocker cover
E Tappet cover seals
Install
1. Replacement is the reversal of the removal
procedure.
2. Inspect the tappet cover seals for signs of
damage. Replace any damaged seals.
3. Install the tappet covers. Tighten the screws to
the correct torque value.
Table 73. Torque Values
Item Nm
A 9
7. 15 - Engine
45 - Oil Sump
00 - General
15 - 180 9813/7150-1 15 - 180
Component Identification
Figure 205.
1 Oil sump 2 Suction strainer
3 Oil pump 4 Oil cooler
5 Filter 6 Camshaft - high pressure oil feed
7 Crankshaft main bearings - high pressure oil
feed
8 Rocker assembly - high pressure oil feed
9 PTO (Power Take-Off) idler gear bearing/
timing case - high pressure oil feed
10 External high pressure oil feed connection
(crankcase) - Turbocharger (if installed)
11 Main high pressure oil feed gallery
(crankcase)
12 Oil pressure switch
Green- Oil at sump pressure Red- Oil at high pressure
Pink- Oil at lower pressure but higher than
sump pressure
8. 15 - Engine
45 - Oil Sump
00 - General
15 - 181 9813/7150-1 15 - 181
Remove and Install
Special Tools
Description Part No. Qty.
Template for Sealant
Oil Sump (Pressed)
892/01149 1
Oil Sump Location
Dowel
892/01150 2
Template for Sealant
Oil Sump (Cast)
892/12354 1
Consumables
Description Part No. Size
Clear Silicone Sealant 4102/0901 0.31L
Before Removal
1. Make sure that the engine is safe to work on.
If the engine has been running, make sure the
engine has cooled sufficiently before you start.
2. Drain the engine oil.
Removal
1. Remove the fixing bolts and remove the oil sump
from the engine. The oil sump may be difficult to
remove due to adhesion of sealing compound.
If necessary, carefully lever the mating flanges
apart. Do not use excessive force, the oil sump
could be damaged. Be sure to retrieve the oil pick
up seal.
2. Use a gasket removal compound, carefully
remove all traces of sealing compound from the
oil sump and engine mating faces. Do not allow
the sealing compound to enter the engine.
3. Use a suitable degreasing agent to thoroughly
clean the oil sump.
Figure 206.
1 Oil sump 1a Integral suction tube
1b Integral baffle plates 2 Oil sump fixing bolts (x20)
3 Oil pick up seal
9. 15 - Engine
45 - Oil Sump
00 - General
15 - 182 9813/7150-1 15 - 182
Installation
1. Lightly smear the new oil pick up seal with oil and
install into the bedplate as shown.
Figure 207.
3 Oil pick up seal
2. Install the two guide pins at the oil sump screw
holes in the engine.
Special Tool: Oil Sump Location Dowel (Qty.: 2)
3. Use the fixing bolts to locate the template to
the oil sump mating face. Make sure that the
template is the correct way round (note that holes
are on different centres).
Special Tool: Template for Sealant Oil Sump
(Cast) (Qty.: 1)
Special Tool: Template for Sealant Oil Sump
(Pressed) (Qty.: 1)
4. Apply a bead of sealing compound around the
oil sump flange using the inside edge of the
template as a guide as shown. Note the beads
around holes.
Length/Dimension/Distance: 4mm
Consumable: Clear Silicone Sealant
5. Carefully remove the template without smudging
the sealant beads.
6. Apply a bead of sealant so as to join the sealant
beads around holes with the bead around the oil
sump flange.
Length/Dimension/Distance: 4mm
7. After applying the sealing compound, the oil
sump must be installed and the bolts torque
tightened within
Duration: 5min
Figure 208.
X
X
S Hole
T Hole
T2 Guide pins
X 4mm Bead of sealant
8. Position the oil sump with the suction tube outlet
aligned with the oil pump inlet port on the engine.
Take care not to damage the oil pick up seal when
you install the oil sump. Damage to the seal could
cause a drop in oil pressure and subsequently
damage to the engine.
9. Locate the oil sump on the guide pins on the
engine. Avoid smudging the sealant beads. DO
NOT remove the guide pins until sufficient bolts
have been installed to secure the oil sump.
10. Install the bolts and tighten the bolts to the correct
torque value. Note that the bolts are not installed
at 6 positions.
Figure 209.
2 Bolts
Y No bolts to be fitted at this position (x6)
10. 15 - Engine
45 - Oil Sump
00 - General
15 - 183 9813/7150-1 15 - 183
After Replacing
1. Allow the sealant to cure for
Duration: 20min
2. Refill the engine with the recommended engine
oil. Refer to (PIL 75-00).
3. Start the engine and check for oil leaks.
Table 74. Torque Values
Item Nm
2 24
11. 15 - Engine
51 - Timing Gear
00 - General
15 - 185 9813/7150-1 15 - 185
00 - General
Introduction .................................................. 15-185
Component Identification ............................. 15-186
Operation ..................................................... 15-187
Check (Condition) ........................................ 15-189
Introduction
The timing gears are located inside a case at the
flywheel end of the engine.
The engine must be timed so that the camshaft
operates the valves at the correct times relative to
the crankshaft position.
Valve timing is achieved by ensuring that the
camshaft drive gear is meshed to the crankshaft gear
at their correct angular positions, refer to Engine-
General, Operation, The Four Stroke Cycle (PIL
15-00) for more information about valve timing.
12. 15 - Engine
51 - Timing Gear
00 - General
15 - 186 9813/7150-1 15 - 186
Component Identification
Figure 210.
B
A
E
D
C
A Crankshaft gear B Camshaft gear
C High pressure fuel pump gear D Oil pump gear
E Heavy duty PTO device gear (if fitted) F Heavy duty PTO device gear (if fitted)
G Low duty PTO device gear (if fitted)
13. 15 - Engine
51 - Timing Gear
00 - General
15 - 187 9813/7150-1 15 - 187
Operation
All the gears are driven via the crankshaft gear as
follows:
• Camshaft gear-The camshaft is driven at half
crankshaft speed.
• High pressure fuel pump gear-The high
pressure fuel pump is driven via the camshaft
gear installed to the camshaft.
• Oil pump gear-The lubrication oil pump is driven
directly by the crankshaft gear.
• Power Take-Off (PTO)-driven by the crankshaft
gear via idler gear.
• Low Duty Power Take-Off (PTO) Gear (if
installed)-driven by the camshaft gear.
Figure 211.
B
A
E
D
C
A Crankshaft gear B Camshaft gear
C High pressure fuel pump gear D Oil pump gear
E Heavy duty PTO device gear (if installed) F Heavy duty PTO device gear (if installed)
15. 15 - Engine
51 - Timing Gear
00 - General
15 - 189 9813/7150-1 15 - 189
Check (Condition)
1. Inspect the gears for wear or damage. If one or
more of the gears are worn or damaged, replace
them.
16. 15 - Engine
51 - Timing Gear
03 - Crankshaft Gear
15 - 190 9813/7150-1 15 - 190
03 - Crankshaft Gear
Remove and Install
Special Tools
Description Part No. Qty.
Crankshaft / Camshaft
Timing Pin
892/01148 2
Note: The illustrations show the engine inverted. If
the drive gear components are being removed prior
to crankshaft or camshaft removal the engine must
be inverted. If the gear components only are being
removed (for inspection/renewal) then the engine
need not be inverted.
Before Removal
1. Remove the starter motor. Refer to (PIL 15-75).
2. Remove the flywheel. Refer to (PIL 15-54).
3. Remove the flywheel housing. Refer to (PIL
15-54).
4. Rotate the crankshaft until the camshaft locking
pin can be inserted through the gear and into the
aligning hole in the rear gear case. Note: The
camshaft and crankshaft locking pins must be
in position to lock the crankshaft and camshaft
before removing the crankshaft gear.
Special Tool: Crankshaft / Camshaft Timing Pin
(Qty.: 2)
5. Remove the taper blanking plug and insert the
crankshaft locking pin.
17. 15 - Engine
51 - Timing Gear
03 - Crankshaft Gear
15 - 191 9813/7150-1 15 - 191
Figure 212.
1
T2
6
4
2
T1
3
7
5
1 Drive gear and flywheel hub fixing bolt 2 Flywheel hub
3 Crankshaft gear 4 Location dowel
5 Camshaft drive gear 6 Blanking plug - crankcase
7 Crankshaft - gear location spigot T1 Timing pin - camshaft
T2 Timing pin - crankshaft
Remove
1. Remove the flywheel hub fixing bolt and remove
the flywheel hub.
2. Remove the crankshaft gear from the crankshaft.
Make sure you retrieve the location dowel.
18. 15 - Engine
51 - Timing Gear
03 - Crankshaft Gear
15 - 192 9813/7150-1 15 - 192
Inspect
1. Carefully inspect the outer diameter of the
flywheel hub for signs of wear or damage. Wear
or damage will cause the crankshaft rear oil seal
to fail. If in doubt renew the hub.
Install
1. Apply some clean engine oil to the location spigot
on the end of the crankshaft.
2. Make sure that the dowel is located in the
crankshaft gear and locate the gear and dowel
on to the crankshaft spigot.
3. Install the flywheel hub to the gear, locate on the
dowel. Fix the hub with fixing bolt. Tighten the bolt
to the correct torque value.
Table 75. Torque Values
Item Nm
1 47
6 11
19. 15 - Engine
51 - Timing Gear
06 - Camshaft Gear
15 - 193 9813/7150-1 15 - 193
06 - Camshaft Gear
Remove and Install
The camshaft drive gears are an interference fit on
the end of the camshaft and cannot be removed
individually. If the gears are damaged or worn the
complete camshaft and gear assembly must be
renewed. Refer to Camshaft- Remove and Install.
Refer to (PIL 15-15).
Figure 213.
1
1 Camshaft gear
20. 15 - Engine
51 - Timing Gear
09 - Fuel Injection Pump Gear
15 - 194 9813/7150-1 15 - 194
09 - Fuel Injection Pump Gear
Remove and Install
Note: The illustrations show the engine inverted. If
the drive gear components are being removed prior
to crankshaft or camshaft removal the engine must
be inverted. If the gear components only are being
removed (for inspection/renewal) then the engine
need not be inverted.
Before Removal
1. Remove the high pressure fuel injection pump.
Refer to (PIL 18-18).
2. Loosely install the high pressure fuel pump and
fixing nut, retain the gear.
3. Remove the starter motor. Refer to (PIL 15-75).
4. Remove the flywheel. Refer to (PIL 15-54).
5. Remove the flywheel housing. Refer to (PIL
15-54).
21. 15 - Engine
51 - Timing Gear
09 - Fuel Injection Pump Gear
15 - 195 9813/7150-1 15 - 195
Figure 214.
1
2
1 Drive gear - high pressure fuel pump 2 Fixing nut - drive gear - high pressure fuel pump
Remove
1. Remove the fixing nut and lift out the gear.
2. If the rear timing case is to be removed, remove
the high pressure fuel pump.
Install
1. Use the fixing nut to loosely install the high
pressure fuel pump and the drive gear. DO NOT
lock the gear to the taper on the fuel pump drive
shaft.
2. Follow the procedures listed under Before
Removal in reverse order. Note that the gear
22. 15 - Engine
51 - Timing Gear
09 - Fuel Injection Pump Gear
15 - 196 9813/7150-1 15 - 196
fixing nut is torque tightened as part of the
high pressure fuel pump replacement procedure.
Refer to (PIL 18-18).
23. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
24. 15 - Engine
51 - Timing Gear
15 - Heavy Duty PTO Gear
15 - 197 9813/7150-1 15 - 197
15 - Heavy Duty PTO Gear
Remove and Install
Note: The illustrations show the engine inverted. If
the drive gear components are being removed prior
to crankshaft or camshaft removal the engine must
be inverted. If the gear components only are being
removed (for inspection/renewal) then the engine
need not be inverted.
Before Removal
1. This procedure requires service parts. Make
sure you have obtained the correct service parts
before you start, refer to Parts Catalogue.
2. Remove the starter motor.
Refer to: Engine > Starter Motor > General >
Remove and Install (Page 15-253).
3. Remove the flywheel.
Refer to: Engine > Flywheel > General > Remove
and Install (Page 15-207).
4. Remove the flywheel housing.
Refer to: Engine > Flywheel > Housing > Remove
and Install (Page 15-209).
25. 15 - Engine
51 - Timing Gear
15 - Heavy Duty PTO Gear
15 - 198 9813/7150-1 15 - 198
Figure 215.
1 Z
Y
6
2
3
WXW45
1
2
3
1 High duty PTO idler gear 2 Idler gear hub
3 Idler gear hub retaining screws (x3) 4 Flywheel hub
5 Flywheel hub fixing bolt 6 Idler gear bearing bush
X Crankshaft gear Y Idler gear hub location dowel
Z Oil feed drilling
Remove
1. Remove the flywheel hub fixing bolt and remove
the flywheel hub. DO NOT remove the crankshaft
gear.
2. Lift the High duty PTO idler gear from the hub.
3. If required, remove the idler gear hub retaining
screws and lift out the hub.
Inspect
1. Check the idler gear teeth and idler gear bearing
bush for signs of damage or excessive wear.
2. Measure the bearing bush inside diameter
to confirm it is within service limits, refer to
Technical Data.
26. 15 - Engine
51 - Timing Gear
15 - Heavy Duty PTO Gear
15 - 199 9813/7150-1 15 - 199
Install
1. Replacement is the reversal of the removal
procedure but note the following.
2. Make sure that all items are clean and free from
damage and corrosion.
3. Make sure the oil way in the idler gear hub is
clear and free from debris. Use an air line to blow
through the oil feed drilling.
4. When you install the idler gear hub, make sure
the Idler gear hub location dowel locates into the
hole in the crankcase.
5. Lubricate the idler gear bearing bush with clean
engine oil.
6. Install the flywheel hub to the crankshaft gear,
locate on the dowel. Tighten the bolt to the
correct torque value.
After Installation
1. Install the flywheel housing.
Refer to: Engine > Flywheel > Housing > Remove
and Install (Page 15-209).
2. Install the flywheel to the crankshaft hub.
Refer to: Engine > Flywheel > General > Remove
and Install (Page 15-207).
3. Install the starter motor.
Refer to: Engine > Starter Motor > General >
Remove and Install (Page 15-253).
Table 76. Torque Values
Item Nm
3 65
5 47